28286
38
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
6-5
Follow the steps shown below to activate the
auto acquisition area.
1. Open the ARP-10 MENU.
2. Select 8. Auto ACQ.
3. Select On.
4. Press the [ACQ/ENTER] key.
5. Press the [MENU] key to close the menu.
Terminating Tracking of Targets
When the Auto Plotter has acquired 10 tar-
gets, no more acquisition occurs unless tar-
gets are lost. Should this happen, cancel
tracking of individual targets or all targets by
the procedure described below.
Individual targets
Place the cursor (+) on a target which you do
not want to be tracked any longer by operat-
ing the omnipad and press and hold down
the [SELECT/CANCEL] key.
All targets
All targets can be canceled from "ARP-10
MENU" at a time.
1. Open the ARP-10 MENU.
2. Select 2. All Cancel.
3. Press the [ACQ/ENTER] key.
6.4 Displaying Target Data
The Auto Plotter calculates motion trends
(range, bearing, course, speed, CPA and
TCPA) of all targets under tracking at the ARP
Data area.
To turn ARP data on;
1. Press the [MENU] key.
2. Select DISP DATA.
3. Press the [ACQ/ENTER] key to select the
message for ARP or NAV or ARP.
4. Press the [ACQ/ENTER] key.
5. Press the [MENU] key to close the menu.
CAUTION
CAUTION
At the speed under 5 kts the target data is
displayed with a delay because of
filtration.
Place the cursor on a wanted target and press
the [SELECT/CANCEL] key. Data on the se-
lected target is displayed at the bottom of the
screen. The symbol of the selected target
gets twice as large as the normal circle. The
data includes the following:
RNG/BRG (Range/Bearing): Range and
bearing from own ship to the last-plotted or
selected target position with suffix T (True)
or M (Magnetic). For true bearings suffix T
is used in case of gyrocompass input and suf-
fix M is used in case of magnetic compass
input.
COURSE/SPEED (Course/Speed): Course
and speed are displayed for the last-plotted
or selected target with suffix T (True) or M
(Magnetic). For true bearings suffix T is used
in case of gyrocompass input and suffix M
is used in case of magnetic compass input.
CPA (Closest Point of Approach): is the
closest range a target will approach to own
ship. Do not mix it with the operator preset
CPA alarm limit.
TCPA: The time to CPA measured with
present speeds of own ship and the targets.
Both CPA and TCPA are automatically cal-
culated. When a target ship has passed clear
of own ship, the CPA is displayed and the
TCPA appears as **.*. TCPA is counted up
to 99.9 min. and beyond this it is indicated
as TCPA>99.9 min.
38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Furuno 1942MK2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Furuno 1942MK2 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info