596219
21
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
13
2.23 Watchman
The watchman function periodically transmits
the radar for about one minute to check for
targets in the guard zone. If a target has
entered or exited the guard zone the aural
alarm sounds, watchman is canceled and the
radar starts transmitting. This feature is useful
when you do not need to observe the radar
continuously but want to be alerted to radar
targets in the guard zone. When the radar starts
transmitting, the buzzer sounds to alert the
operator.
St-by
5, 10 or
20 min
Tx
1 min
Tx
1 min
St-by
5, 10 or
20 min
Watchman
starts.
* Timer appears and countdowns
time to Tx when 1:00 remains
in ST-BY.
*
*
Figure 2-22 How watchman works
Turning watchman on/off
1. Set a guard zone. (See “Setting a guard
zone” on page 11.)
2. Press the [MENU] key to open the menu.
3. Select WATCHMAN.
4. Select transmitting interval or turn watchman
off. .
5. Press the [MENU] key to register your
selection and close the menu.
"WATCHMAN" appears at the top left-hand
corner on the screen when watchman is active.
Note: If no guard zone is set, the buzzer
sounds when the radar starts transmitting.
Canceling watchman
Press any key at any time. If done while
transmitting, watchman is disabled and the
normal display appears. In stand-by, the timer
appears and counts down from one minute, and
then the radar goes into stand-by.
2.24 Navigation Data
With navigation data input in NMEA 0183
format (IEC 61162-1), navigation data can be
displayed at the screen bottom.
Navigation data includes position, course,
speed, and range and bearing to destination
waypoint (if set on navaid).
6.0
NM
2.0
WP
LL
17.0°
M
2.6
NM
34° 38.99'
N
135° 19.22'
E
CSE
18.0°
M
*
SPD
4 .3
KT
Course
EBL
VRM
45.0°
2.42
NM
255.0°
3.35
NM
Speed
Bearing and range to waypoint
*- Bearing suffixed with M
(Magnetic bearing) or T (True bearing).
Own ship position
Waypoint
mark
*
Figure 2-23 Sample navigation data display
Note 1: External sensor must be capable of
outputting such data to show it on this radar.
Note 2: A location shows three bars (- - -) when
there is no corresponding data.
Note 3: To receive data from multiple
equipment, all data must be combined into one
data line by a data-mixing device.
Note 4: Magnetic and true bearing may be
selected alternately by pressing and holding
down the [GAIN] key.
Turning on the navigation data display
1. Press the [MENU] key to open the menu.
2. Select NAV DATA.
3. Select ON.
4. Press the [MENU] key to conclude.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Furuno 1712 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Furuno 1712 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Furuno 1712

Furuno 1712 Installatiehandleiding - English - 27 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info