68173
47
Verklein
Vergroot
Pagina terug
1/103
Pagina verder
·
No other keys may be configured between connection keys.
·
The number of possible connections depends on the number of connection keys that are configu
-
red. Iffewer than four (4) keys are configured, the functions Call waiting and Inquiry call areonly
available in a limited scope.
·
If several connections are »Idle«, the call signaled first is picked up when the handset is lifted.
·
If several connection keys are available, the corresponding connection key can be used to select
the call to be picked up when severalcalls are waiting. Note here however that only one ISDN sys
-
tem telephone should be operated at the ISDN port, and that only simple call waiting is configu
-
red. Only then is it possible to give preference to a second waiting call over an ongoing call (both
callers require one B channel each).
·
If a call is now signaled, a further connectioncan be set up without lifting the handset using a furt
-
her connection key.
·
Broker’s calls can be executed using the connection keys.
·
Allocation of a connection, or of a call, is retained until the call or connectionis ended, in contrast
to the softkeys »Connection 1..«.
·
A connection can be set up using a connection key and then pressing a line key.
·
During an ongoing call it is possible to set up a further connection by pressing the connectionkey.
·
Pressing the terminating key discontinues the current connection and the connection with the
last call that was on hold.
·
If you wish to connect an ongoing call with one that is on hold you must click the softkey »Trans-
fer« and then press the connection key for the call that is on hold.
»System-parked inquiry« button
The called subscriber uses the system-parked inquiriy call feature to dial the default numeric code. The telephone is
now available for other uses, for example an announcement or message. A different subscriber can accept the call
when he/she lifts the handset and dials the corresponding number for the call on hold. The code numbers given by
thePABX system canalso be entered in the function keysfor oneor several systemtelephones. Ifa callis placed in the
Parked inquiry queue by pressing a function key, this is indicated by the LEDs of the function keys flashing at the
system telephones configured for this feature. The call can be picked up by pressing the corresponding function key.
This performance feature is possible when only one call is on hold.
Team keys
A team key is a normal line key to which the internal number for a team is assigned. When the corresponding key is
pressed hands-free calling is activated and the listed team called.
If a call for the listed team is signaled you can accept the call by pressing the team key.
Team log-on/off
If you are entered as a subscriber in the call switching modes of one or more teams you can configure a key so as to
controlthecallsignaling of yourtelephone. Whenyou are logged in,teamcalls will besignaledat your telephone. No
team calls are signaled at your phone if you are not logged in.
Day/ Night modes
You can configure a key so that you can switch between the call switching modes of the PABX (Day/Night modes)
when that key is pressed. The pabx uses call modes for signaling team or door terminal calls, for example.
Announcement (see page 20)
Message enable on/off
You can also explicitly inhibit or enable receiving of messages using a corresponding function key.
Function keys System telephony
43
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Funkwerk CS410 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Funkwerk CS410 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info