68173
5
Verklein
Vergroot
Pagina terug
1/103
Pagina verder
You can connect the system telephone at the internal S0, Up0 or Ethernet connection of a pabx system. The
telephone provides system features when connected to certain elmeg PABX systems. For example:
·
Dialing from the pabx telephone directory
·
Sending and receiving SMS messages
·
Messaging and intercom callswith other system telephones connected to the pabx.
·
Function keys for controlling special PABX features (switching call modes, team log-in/off, line
buttons, extension buttons).
The status of the programmed features can be displayed by means of LEDs assigned to the specific
function keys.
·
Accessing the PABXsystem menu. Thismenu provides further pabx features.
The internal connection of the PABX systems automatically interfaces with the system telephone. Pleaserefer to the
operating instructions of your PABX to determine whether these typical system features are provided with the
various system telephones.
CS400 / CS400xt
This system telephone is delivered with a key extension module (T400/2), providing you with 10 additional, freely
configurable keys.
It is designed for connection to an internal S0 port (4-wire cable) of a PABX system. The system telephone is not
equipped with a USB or serial port for configuration or other uses. This phone must be configured via the internal
ISDN port using the WinTools Professional Configurator. There are also no »Audio functions« implemented and
you can not use the Answering machine or Up0 modules or functions. None of the functions for this module are
shown in the display, nor can they be used.
This telephone is equipped with the function »Emergency operation«. »Off« = Emergency operation off, »On« =
Emergency operation On. meaning it can be operated at NT via the PABX
system on a loss of 230 V~ power. If more than one telephone is connected to
the ISDN system, the emergency operation function may only be configured
on one of the ISDN system telephones. All calls are signaled at this phone.
The volume of the ringing tone is set to low.
In addition to making normal calls, the following functions are also available:
·
Selection of a call number from the telephone directory or the speed dial memory after lifting the
handset.
·
Display of call duration and costs.
·
Mute.
·
Terminate call.
The phone number (MSN) that the network service provider assigned to you as the first (master) number will be
transmitted to external subscribers. Charge billing is effected for this. Observe the information concerning
emergency operation in the PABX system. Ongoing connections are interrupted in the event of a power failure.
Information:
Refer to the operating manual of your PABX system to see if your system supports emergency operation.
Description and installation
1
OFF
ON
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Funkwerk CS410 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Funkwerk CS410 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info