576269
77
Verklein
Vergroot
Pagina terug
1/90
Pagina verder
77
Recording Playing discs EditingGetting started
Changing the
Setup menu
VCR functions Others
Before you start
Connections
Español
EN
xxxx
Others
Troubleshooting
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper performance.
Symptom Remedy
D
V
D
V
C
R
The power does not turn on. Check that the AC power cord is connected securely.
(In case of power failure) Check the breaker.
• Press [TIMER SET] to cancel the timer standby mode.
There is no picture. Re-connect the connecting cord securely.
Check if the connecting cords are damaged.
Check the connection to your TV (page 14).
Check the RF output channel when you view a TV program using
RF connection.
Switch the input selector on your TV (such as to “EXT1”) so that
the signal from this unit appears on the TV screen.
TV program reception does not fill
the screen.
Try to set the channels with “Auto Channel Preset” or “Manual Channel
Preset” in the Setup menu (pages 19-20).
Select a channel of any TV program using the [CH K / L].
• Press [VIDEO/TV] if necessary.
TV program pictures are distorted. Adjust TV antenna.
Adjust the picture (see the TV’s instruction manual).
Place the unit and TV farther apart.
Place the TV and any bunched antenna cables farther apart.
TV channels cannot be changed. Switch the input to TV.
Connect the antenna cable correctly (page 14).
Playback picture is distorted. Keep the equipment which may cause electrical disturbances, such
as a cellular phone, away.
The playback picture or TV
program from the equipment
connected through the unit is
distorted.
If the playback picture output from a DVD player, VCR or tuner
goes through the unit before reaching your TV, the copy-protection
signal applied to some programs could affect picture quality.
Disconnect the playback equipment in question and connect it
directly to your TV.
There is no sound. Re-connect all connections securely.
The connecting cord is damaged.
Check the connections to the amplifier input.
The input source setting on the amplifier is incorrect.
The unit is in pause mode or in Slow forward / Slow reverse play.
The unit is in fast forward or fast reverse mode.
The channel cannot be changed
from the channel you are recording.
Set the TV’s input to “TV”.
Nothing was recorded even though
you set the timer setting correctly.
There was a power failure during recording.
The internal clock of the unit stopped due to a power failure that
lasted for more than 30 seconds. Reset the clock (pages 22-24).
Disconnect the AC power cord from the AC outlet, and connect it
again.
The program contains copy protection signals that restricts copying.
The timer setting overlapped with another setting that has priority.
Timer Recording is not completed
or did not start from the beginning.
The timer setting overlapped with another setting that has priority
(page 32).
Disc space was not enough.
Timer Recording is impossible. Make sure TIMER REC indicator lights up on the front panel of this
unit. If not, press [TIMER SET].
The remote control does not work. Check the antenna or cable connection to the main unit.
Check the battery life of the remote control.
Check if there is an obstacle between the sensor and the remote
control.
Test the signal output. If OK, then possible remote sensor trouble.
(Refer to “IR SIGNAL CHECK” on page 5.)
• Press [DVD
] or [VCR ], whichever you need. Then, try again.
• Press [TIMER SET] to cancel the timer standby mode.
The unit does not operate properly. When static electricity, etc., causes the unit to operate abnormally,
unplug the unit and then plug it again.
77

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Funai WV20V6 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Funai WV20V6 in de taal/talen: Engels, Spaans als bijlage per email.

De handleiding is 9,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info