503728
57
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
1
EN
SECAM PA L
DVD / VIDEO CASSETTE RECORDER
WD6D-D4413DB
OWNER’S MANUAL
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
For Customer Use:
Carefully read the Model No. and Serial No. located at the
back of the unit and enter the information below. Retain
this information for future reference.
Model No. __________________________
Serial No. __________________________
E9TF0ED_EN.book Page 1 Wednesday, March 17, 2010 1:32 PM
2
EN
.
Precautions
Laser Safety
This unit employs a laser. Only qualified service personnel
should remove the cover or attempt to service this unit, due to
the possibility of eye injury.
Power Supply
The power supply is connected and the unit is live when the
mains cable is plugged into a 220 - 240 V~, 50 Hz AC outlet.
To operate the unit, press [STANDBY-ON Q].
Caution
1. Do not attempt to open the cabinet. There are no user
serviceable parts inside. Refer all servicing to qualified
service personnel.
2. Slots and openings in the cabinet at the sides and
underneath are provided for ventilation. To ensure reliable
operation and to protect the unit from overheating, these
openings must not be blocked or covered.
Avoid installation in enclosed spaces such as bookcases
unless suitable ventilation is provided.
3. Keep the unit away from radiators and other heat sources.
4. Avoid use near strong magnetic fields.
5. Do not push objects of any kind into the unit through the
cabinet slots or openings as they could touch electrically
live parts or short circuit parts resulting in a fire or electric
shock.
6. To prevent fire or shock hazard, do not expose this
apparatus to dripping or splashing, no objects filled with
liquids, such as vases, should be placed on the
apparatus.
7. Do not stand the unit vertically. Use the unit in a horizontal
(flat) position only.
8. Before attempting to operate the unit, make sure that the
timer recording mode is off.
9. This product is in Stand-by mode when turned off while
the mains cable is connected.
The front panel display will not light up. This is a
Power Saving Mode (ECO) for standby.
10. Do not place any combustible objects on the device
(candles, etc.).
11. Before moving the unit, be sure to remove any discs and
unplug the mains cable from the AC outlet.
12. Disconnect the mains plug to switch off when the unit
becomes faulty or not in use.
13. The mains plug shall remain readily operable.
14. Read the manual instructions to ensure correct and safe
installation and interconnection of the unit in multimedia
systems.
15. Keep the distances 20 cm around apparatus of ventilation
openings.
Introduction
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The important note is located on the rear of the cabinet.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
The symbol for CLASS II (Double Insulation)
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK MECHANISM.
WARNING: LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
E9TF0ED_EN.book Page 2 Wednesday, March 17, 2010 1:32 PM
3
EN
Introduction Connections
Basic Setup /
TV View Operation
Playback Editing OthersFunction SetupRecording VCR Functions
Make your contribution to the environment!!!
Exhausted batteries do not belong in the
dustbin.
You can dispose of them at a collection point for
exhausted batteries or special waste.
Contact your council for details.
Installation Location
For safety and optimum performance of this unit:
Install the unit in a horizontal and stable position.
Keep the unit away from electronic equipment such as an
amplifier, TV, etc. to prevent warping,damage, fire and
malfunction.
Do not place anything directly on top of the unit.
Shield the unit from direct sunlight and keep away from
sources of intense heat. Avoid dusty or humid locations.
Avoid locations with insufficient ventilation for suitable heat
dissipation. Do not block the ventilation holes on the sides of
the unit. Avoid locations subject to strong vibration or strong
magnetic fields.
Avoid the Hazards of Electrical Shock and Fire
Do not handle the mains cable with wet hands.
Do not pull on the mains cable to disconnect it from the AC
outlet. Grasp it by the plug.
If, by accident, water is spilled on the unit, unplug the mains
cable immediately and take the unit to an authorised service
centre for servicing.
Moisture Condensation Warning
Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, after heating a cold
room, or under conditions of high humidity. Do not use the unit
for at least 2 hours to allow the inside to dry.
About Copyright
Unauthorised copying, broadcasting, public performance and
lending of discs are prohibited. This product incorporates
copyright protection technology that is protected by U.S.
patents and other intellectual property rights. Use of this
copyright protection technology must be authorised by
Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorised by
Macrovision. Reverse engineering or disassembly is
prohibited.
Notice for the Progressive Scan Outputs
Consumers should note that not all high definition television
sets are fully compatible with this product and may cause
artifacts to be displayed in the picture. In case of picture
problems with 480 or 576 progressive scan output, it is
recommended that the user switch the connection to the
‘standard definition’ output. If there are questions regarding
your TV set compatibility with this 480p or 576p product,
please contact our customer service centre.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can
be reused. Please dispose of any materials in accordance
with your local recycling regulations.
This product consists of materials which can be recycled
and reused if disassembled by a specialised company.
Following information is only for EU-member states:
The use of the symbol indicates that this product may not
be treated as household waste. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this
product. For more detailed information
about recycling of this product, please
contact your local city office, your
household waste disposal service or the
shop where you purchased the product.
Following information is only valid EU-member States:
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symbol indicates that
batteries and/or accumulators must be collected and
disposed of separately from household waste.
If the battery
or accumulator contains more than the specified values of
lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in
the Battery Directive (2006/66/EC), then the chemical
symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd)
will appear below the crossed out wheeled dust bin
symbol. By participating in separate collection of batteries,
you will help to assure the proper disposal of products and
batteries and thus help to prevent potential negative
consequences for the environment and
human health. For more detailed
information about the collection and
recycling programmes available in your
country, please contact your local city office
or the shop where you purchased the
product.
Do not place the unit on the furniture that is capable of
being tilted by a child and an adult leaning, pulling,
standing or climbing on it. A falling unit can cause serious
injury or even death.
Pb, Hg, Cd
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
“Dolby
®
Digital Recording enables consumers to record
high-quality video with stereo sound on recordable DVD
discs. The technology, when utilised instead of PCM
recording, also saves recordable disc space, allowing for
higher video resolution or extended recording time on
each DVD. DVDs created using Dolby Digital Recording
will play back on all DVD-Video players.
Note: This is true when the players are compatible with
actual recordable DVD discs.
E9TF0ED_EN.book Page 3 Wednesday, March 17, 2010 1:32 PM
4
EN
Maintenance
CLEANING THE UNIT
Use a soft cloth slightly moistened with a mild detergent
solution. Do not use solutions containing alcohol, spirits,
ammonia or abrasives.
CLEANING DISCS
If a disc becomes dirty, clean it with a cleaning cloth. Wipe the
disc from the centre out. Do not wipe in a circular motion.
Do not use solvents such as benzine, thinners, commercially
available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analogue records.
DISC HANDLING
Handle the discs so that fingerprints and dust do not adhere
to the disc surfaces.
Always store the disc in its protective case when it is not in
use.
SERVICING
If the unit becomes inoperative, do not try to correct the
problem by yourself. There are no user serviceable parts
inside. Turn the unit off, unplug the mains cable, and consult
your dealer or an authorised service centre.
CLEANING THE DISC LENS
If the unit does not perform correctly even though you have
referred to “Troubleshooting” and the relevant sections in the
Owner’s Manual, the laser optical pickup unit may be dirty.
Consult your dealer or an authorised service centre for
inspection and cleaning of the laser optical pickup unit.
AUTO HEAD CLEANING
Automatically cleans video heads as you insert or remove a
cassette, so you can see a clear picture.
Playback picture may become blurred or interrupted while
the TV programme reception is clear. Dirt accumulated on
the video heads after a long period of use, or the usage of
rental or worn tapes can cause this problem. If a streaky or
snowy picture appears during playback, the video heads in
the unit may need to be cleaned.
1 Please visit your local Audio / Video store and purchase a
good quality VHS Video Head Cleaner.
2 If a Video Head Cleaner does not solve the problem,
please consult your dealer or an authorised service centre.
Note
Remember to read the instructions along with the video
head cleaner before use.
Clean video heads only when problems occur.
Manufactured under license under U.S.
Patent #: 5,451,942 & other U.S. and
worldwide patents issued & pending. DTS
and the Symbol are registered trademarks
and DTS Digital Out and the DTS logos
are trademarks of DTS, Inc. Product
includes software.
© DTS, Inc. All Rights Reserved.
HDMI, the HDMI Logo, and
High-Definition Multimedia
Interface are trademarks or
registered trademarks of HDMI
Licensing LLC in the United
States and other countries.
DivX
®
, DivX Certified
®
and associated
logos are registered trademarks of
DivX, Inc. and are used under license.
is trademark of Eastman Kodak Company.
DVB is a registered trademark of the DVB
Project
‘MP3 SURROUND’ and its logo are trademarks of
Thomson S.A.
Note: Supply of this product does not convey a license nor
imply any right to distribute content with this product in
revenue-generating broadcast systems (terrestrial,
satellite, cable and/or other distribution channels),
streaming applications (via Internet, intranets and/or other
networks), other content distribution systems (pay-audio or
audio-on-demand applications and the like) or on physical
media (compact discs, digital versatile discs,
semiconductor chips, hard drives, memory cards and the
like). An independent license for such use is required.
For details, please visit
http://mp3licensing.com.
E9TF0ED_EN.book Page 4 Wednesday, March 17, 2010 1:32 PM
5
EN
Introduction Connections
Basic Setup /
TV View Operation
Playback Editing OthersFunction SetupRecording VCR Functions
Remote control with 2 R6 (1.5 V) batteries
•RF cable
Owner’s Manual
•CD-ROM
Warranty Card
Features
The following features are available with this unit.
Recording up to 12 programmes
One-touch timer recording:
VPS /PDC: [E Page 34]
Automatic chapter mark setting: [E Page 30]
Automatic Playlist making
(VR mode DVD-RW discs only)
Automatic finalising
(video mode DVD-RW/-R discs only): [E Page 41]
Automatic title menu making
(video mode DVD-RW/-R discs only): [E Page 41]
DV dubbing:
Dubbing mode: [E Page 40]
Theatre surround sound: [E Page 19]
Quick search: [E Page 50]
•CM skip: [E Page 47]
Playback from Original or a Playlist
(VR mode DVD-RW discs only): [E Page 42]
Virtual Surround System: [E Page 53]
Playing back data files recorded in a USB device:
[E Page 43]
Chasing playback during recording and simultaneous
playback and recording: [E Page 49]
Playing back MP3 / JPEG / DivX
®
/ Kodak Picture CD
files: [E Pages 42-46]
Quick search: [E Pages 71-72]
Adding or deleting chapter marks manually:
[E Pages 56-57]
Creating titles to a Playlist
(VR mode DVD-RW discs only): [E Page 58]
Deleting titles: [E Page 55]
Deleting a scene of a title
(VR mode DVD-RW discs only): [E Page 59]
Editing title name: [E Page 56]
Combining titles
(VR mode DVD-RW discs only): [E Page 58]
Dividing titles
(VR mode DVD-RW discs only): [E Pages 57-58]
Protecting titles
(VR mode DVD-RW discs only): [E Page 57]
Adding or deleting chapter marks at once
(video mode DVD-RW discs only): [E Page 57]
Playing back discs recorded in video mode in any
regular DVD player: [E Page 41]
Progressive scan system: [E Pages 17, 67]
HDMI (High-Definition Multimedia Interface):
[E Pages 18, 68]
Accessories Supplied
Recording
DVD VCR
(DVD) [E Page 32]
(VCR) [E Page 70]
DVD
Dubbing
DVD VCR
(DVD) [E Pages 38-39]
(VCR) [E Page 71]
Playback
DVD
VCR
Editing
DVD
Compatibility
DVD
Others
DVD
E9TF0ED_EN.book Page 5 Wednesday, March 17, 2010 1:32 PM
6
EN
Table of Contents
Introduction ...................................................... 2
Precautions ........................................................................ 2
Features ............................................................................. 5
Guide to the Owner’s Manual............................................. 7
Functional Overview......................................................... 10
Installing Batteries in the Remote Control........................12
Switching DVD / VCR mode ............................................. 12
Guide to On-Screen Displays........................................... 13
Front Panel Display Guide................................................ 16
Connections ................................................... 17
Connecting to a TV........................................................... 17
Connecting to External Equipment................................... 19
Digital Audio for Better Sound Quality.............................. 19
Basic Setup / TV View Operation.................. 20
Initial Setting..................................................................... 20
Channel Setting................................................................ 21
TV View Operation ........................................................... 23
Recording........................................................ 28
Information on DVD Recording......................................... 28
Formatting a Disc ............................................................. 30
Selecting the Audio Mode ................................................ 31
Basic Recording and One-touch
Timer Recording (OTR) .................................................32
Timer Recording............................................................... 33
Timer Recording (EPG).................................................... 36
Satellite Link ..................................................................... 36
Settings for External Equipment....................................... 37
Information on DV Dubbing .............................................. 38
DVC to DVD Dubbing ....................................................... 39
Dubbing Mode .................................................................. 40
Setting a Disc to Protect................................................... 41
Finalising Discs ................................................................ 41
Playback.......................................................... 42
Basic Playback ................................................................. 42
Special Playback .............................................................. 47
Search .............................................................................. 50
Repeat / Random / Programme Playback / Slide Show ... 51
Selecting the Format of Audio and Video......................... 52
Editing .............................................................54
Guide to a Title List .......................................................... 54
Editing Discs .................................................................... 55
Function Setup ............................................... 60
General Setting ................................................................ 63
VCR Functions................................................70
Playback........................................................................... 70
Basic Recording and One-touch
Timer Recording (OTR) ................................................. 70
Search.............................................................................. 71
Other Operations.............................................................. 72
Changing the Video Colour System................................. 72
Hi-Fi Stereo Sound System ............................................. 72
Others .............................................................. 73
Troubleshooting................................................................ 73
Troubleshooting for Error Messages ................................ 76
Language Code ............................................................... 78
Specifications................................................................... 79
Declaration of Conformity................................... Back Cover
E9TF0ED_EN.book Page 6 Wednesday, March 17, 2010 1:32 PM
7
EN
Introduction Connections
Basic Setup /
TV View Operation
Playback Editing OthersFunction SetupRecording VCR Functions
Guide to the Owners Manual
To show what recording mode or media type applies to each
function, the following symbols appear at the beginning of
each operating item.
The following is the description for the symbols for tuner
setting used in this manual.
Symbols Used in the Owner’s Manual
Symbol Description
Available to DVD-videos
Available to DVD-RW discs in video mode
Available to DVD-RW discs in VR mode
Available to DVD-R discs in video mode
Available to audio CDs
Available to CD-RW/-R discs and USB device with
MP3 files
Available to CD-RW/-R discs and USB device with
JPEG files
Available to DVD-RW/-R, CD-RW/-R discs and USB
device with DivX
®
files
(DivX
®
files in USB device are not guaranteed.)
Available to VHS tapes
Use only cassettes marked VHS ( )
Symbols for Tuner Setting and
Recording
ANALOG : Settings only for the analogue mode
DVB : Settings only for the DVB mode
“DVB” means “Télévision Numérique
Terrestre” (TNT).
DVD-V
DVD-V
DVD-V
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
CD
CD
CD
MP3
MP3
MP3
JPEG
JPEG
JPEG
DivX
DivX
®
DivX
®
VCR
VCR
SECAMPAL
E9TF0ED_EN.book Page 7 Wednesday, March 17, 2010 1:32 PM
8
EN
DVD players with are capable of playing DVD-RW recorded in VR mode.
Media for Recording / Playing
Media Type DVD-RW DVD-R
Logo
Format Can be formatted in VR or video mode
Automatically formatted
in video mode
Video Mode VR Mode
Icon
Maximum Record Time
480 min
(12 cm)
144 min
(8 cm)
480 min
(12 cm)
144 min
(8 cm)
480 min
(12 cm)
144 min
(8 cm)
Recordable/Playable
Versions
1×-6×
Ver. 1.1/1.2
Ver. 1.1/1.2 CPRM compatible
1×-16×
Ver. 2.0/2.1
Compatibility
Playable on most DVD
players.
Finalisation necessary.
(Title menu will be
created)
Playable only on VR
mode compatible unit.
Finalisation
recommended.
Playable on most DVD
players.
Finalisation necessary.
(Title menu will be
created)
Available Features
Recording Features
Record TV
Programmes
✔✔✔
Reuse by Deleting
the Current
Contents
✔✔
Record 16:9 Size
Pictures
✔✔✔
Record Copy-once
Programmes
*
Create Chapters at
Fixed Intervals
(auto chapter)
✔✔✔
Editing Features
Playlist Original
Scene Delete
✔✔
Edit Title Name
✔✔✔✔
Create Chapters
Wherever You Like
(chapter mark)
✔✔
Divide a Title
Combine Titles
Delete a Title
✔✔✔✔
Create a Playlist
Protect a Title
: Available Grey: Not available
* CPRM compatible disc only.
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
E9TF0ED_EN.book Page 8 Wednesday, March 17, 2010 1:32 PM
9
EN
Introduction Connections
Basic Setup /
TV View Operation
Playback Editing OthersFunction SetupRecording VCR Functions
is a trademark of DVD Format/Logo Licensing Corporation.
ABOUT DIVX VIDEO: DivX
®
is a digital video format created
by DivX,Inc. This is an official DivX Certified device that
plays DivX video. Visit www.divx.com for more information
and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified
®
device must be registered in order to play DivX Video-on-
Demand (VOD) content. To generate the registration code,
locate the DivX VOD section in the device setup menu. Go
to vod.divx.com with this code to complete the registration
process and learn more about DivX VOD.
DivX Certified
®
to play DivX
®
video, including premium
content.
Media containing the DivX
®
files with the DivX
®
GMC (Global
Motion Compensation) playback feature, which is DivX
®
supplemental function, cannot be played back on this unit.
The following discs will not play back on this unit.
On the following disc, the sound may not be heard.
Super audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density super audio CD layer
cannot be heard.
This unit uses the PAL system. However, it is also possible to
play back DVDs using other colour systems, such as NTSC.
This unit has been designed to play DVD with
region 2. If these region symbols do not appear on
your DVD, you cannot play back the DVD in this unit.
The number inside the globe refers to region of the
world.
Following discs are recommended for good recording quality
and are proven to be compatible with this unit.
However, depending on the media condition the unit may not
read the disc properly.
Discs for Playing
Disc Type DVD-VIDEO CD-DA CD-RW CD-R
Logo
Icon
Files for Playing
Type of title MP3 JPEG DivX
®
Icon
Media
CD-RW/-R
USB device
CD-RW/-R
USB device
CD-RW/-R
DVD-RW/-R
USB device (not guaranteed)
DVD-V
DVD-V
DVD-V CD
CD
CD CD
CD
CD CD
CD
CD
MP3
MP3
MP3
JPEG
JPEG
JPEG
DivX
DivX
®
DivX
®
Unplayable Discs
CD-ROM Compact Disc-Interactive
(CD-I)
Video Single Disc (VSD) DVD-ROM
DVD-audio Unfinalised disc
DVD or CD contains Windows Media™ Audio files
DVD-RW/-R recorded in non compatible recording format
•Blu-ray Disc •HD DVD
Colour Systems
Region Codes
Verbatim DVD-R 8x, DVD-RW 2x
JVC DVD-RW 4x
Maxell DVD-R 8x/16x
2
E9TF0ED_EN.book Page 9 Wednesday, March 17, 2010 1:32 PM
10
EN
Functional Overview
You can also turn on the unit by pressing these buttons.
You can turn on the unit by pressing these buttons only when a videotape is in this unit.
Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, you must unplug the
AC power cord.)
1 STANDBY-ON indicator
2 Cassette compartment
3 OPEN\CLOSE A button*
1
(DVD)
4 VCR/DVD indicators
5 Disc tray
6 DV-IN jack (AV3)
7 USB input jack
8RECORDI button (DVD)
9PLAYB button*
1
(DVD)
10 STOP C button (DVD)
11 SELECT button
12 DUBBING button
13 PROG. K \ L buttons
14 Display (“Off” in standby)
15 Infrared sensor window
16 RECORD I button (VCR)
17 PLAY B button*
2
(VCR)
18 F.FWD D button*
2
(VCR)
19 REW E button*
2
(VCR)
20 STOP\EJECT CA button (VCR)
21 STANDBY-ON Q button*
3
1 Mains cable
2 HDMI OUT jack
3 DIGITAL AUDIO OUT (COAXIAL) jack
4 AUDIO OUT (L\R) jacks
5 COMPONENT VIDEO OUT jacks
6 AV2 (DECODER) socket
7 AV1 (TV) socket
8 ANTENNA IN
9 ANTENNA OUT
Note
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
After turning off the unit, leave the mains cable plugged for about one minute. Otherwise it may cause data loss or the unit may
not work properly.
This unit does not have an RF modulator.
Front Panel
1
20
19
*
2
21
*
3
18
*
2
16
11 9
*
1
2
3*
1
54
17
*
2
13 12 10 8
7 6
1415
Button names described in the Owner’s Manual
The instructions in this manual are described mainly with the operations using the remote control. Some operations can be
carried out using the buttons on the front panel.
Rear Panel
1 3 456 87 92
E9TF0ED_EN.book Page 10 Wednesday, March 17, 2010 1:32 PM
11
EN
Introduction Connections
Basic Setup /
TV View Operation
Playback Editing OthersFunction SetupRecording VCR Functions
1 STANDBY-ON Q button
2 INPUT SELECT button
3 Number buttons
4 SAT.LINK button
5 TEXT button
6 AUDIO button
7 TOP MENU button (DVD)
8 Direction
K / L / 0 / 1 buttons
9 DISPLAY button
10 RED/GREEN/YELLOW/BLUE button
SYSTEM (YELLOW) button (VCR)
SEARCH (BLUE) button (VCR)
11 REV E button
12 PLAY B button
13 SKIP H button (DVD)
14 VCR button
15 PAUSE F button
16 DUBBING button
17 SETUP button
18 TIMER SET button
19 HDMI button
20 OPEN\CLOSE EJECT A button
21 PROG. G\H buttons
22 TIME SHIFT button (DVD)
23 C button
24 CLEAR button
25 GUIDE button
26 SUBTITLE button
27 MENU/LIST button (DVD)
28 ENTER/OK button
29 RETURN/BACK button
30 FWD D button
31 STOP C button
32 SKIP G button (DVD)
33 DVD button
34 CM SKIP button (DVD)
35 REC SPEED button
36 REC button
37 1.3x/0.8x PLAY button (DVD)
38 TIMER PROG. button
Note
If you turn off this unit, [OPEN\CLOSE EJECT A] on the
remote control is not available. Be sure to use
[OPEN\CLOSE A] or [STOP\EJECT CA] on the unit.
Remote Control
1
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
37
36
38
2
3
4
5
6
7
8
9
10
11
13
14
15
16
17
18
12
Button names described in the Owner’s Manual
The instructions in this manual are described mainly with the
operations using the remote control. Some operations can
be carried out using the buttons on the front panel.
E9TF0ED_EN.book Page 11 Wednesday, March 17, 2010 1:32 PM
12
EN
Installing Batteries in the Remote
Control
Install 2 R6 (1.5 V) batteries (supplied) into the remote
control, carefully match with the polarity indicated inside the
battery compartment.
Caution
Incorrect use of batteries can result in hazards such as
leakage and bursting.
Do not mix new and old batteries together.
Do not use different kinds of batteries together.
Make sure that the plus (+) and minus (–) ends of each
battery match the indications inside the battery
compartment.
Remove batteries if the equipment will not be used for a
month or more.
When disposing used batteries, please comply with
governmental regulations or the public instructions for
environmental protection that apply in your country or area.
Do not recharge, short-circuit, heat, burn or disassemble
batteries.
Make sure there is no obstacle between the remote control
and the remote control sensor on the unit.
Use within the operating range and angle as shown.
The maximum operable range as follows:
Remote control operation may become unreliable if the
remote control sensor of the unit is being exposed by the
strong sunlight or fluorescent light.
Remote controls for different devices can interfere with each
other. Be careful when using remote controls for other
equipment located close to the unit.
Replace the batteries when the operating range of the
remote control reduces.
Switching DVD / VCR mode
You must select which component you want to operate first.
Press [DVD] or [VCR] on the remote control or [SELECT] on
the front panel.
Press [DVD] on the remote control or [SELECT] on the front
panel.
(Verify that the DVD indicator is lit in green.)
Press [VCR] on the remote control or [SELECT] on the front
panel.
(Verify that the VCR indicator is lit in orange.)
About the Remote Control
Line of sight: approximately 7 m
Either side of centre: approximately 5 m within 30 degrees
21 3
Within
about 5 m
5 m (30°)7 m
5 m (30°)
DVD
VCR
DVD button
VCR button
button
indicators
E9TF0ED_EN.book Page 12 Wednesday, March 17, 2010 1:32 PM
13
EN
Introduction Connections
Basic Setup /
TV View Operation
Playback Editing OthersFunction SetupRecording VCR Functions
Guide to On-Screen Displays
Press [DVD] first.
With a disc inserted into the unit, press [DISPLAY] to display
the on-screen display. The on-screen display shows
information about what is recorded on the disc.
This is an example screen for explanation. Displayed items
vary depending on the actual mode.
1 Indicates a disc type and format mode.
2 Indicates a type of titles for VR mode DVD-RW
disc.
3 Indicates a channel number, station name
(analogue channel only) or selected external
input mode.
4 Indicates a media, recording speed and
possible recording time left.
5 Indicates the current title number/total number
of titles, the current chapter number/total
number of chapters, and time lapse of the
current title playback/total duration of the title.
6 Each icon means:
7 Indicates an operation status.
8 Indicates the component in use.
: DVD
: USB device
Note
For some descriptions on this manual, only one disc type is
indicated as an example.
Press [DISPLAY] repeatedly while the display menu is
displayed to display the following information.
1 Indicates the resolution of the HDMI output
image.
2 Indicates the HDMI video format.
3 Indicates the HDMI audio format.
“- - -” will be displayed, when it does not have any
information.
DISPLAY Menu
DVD
: Search
: Audio
: Subtitle
: Angle
: Repeat
: Marker
: Noise Reduction
: Zoom
: Surround
1/ 5 1/ 5
-
R W VR ORG
0:01:00 / 1:23:45
2
2
2
8
8
8
5
5
5
6
6
6
1
1
1
3
7
1 TF1
T C
DVD 2H 1:53
4
<Title / File Name Information>
Title name information
(only when VR mode DVD-RW, unfinalised
video mode DVD-RW/-R disc is in playback)
File name information
(only when MP3/JPEG/DivX
®
files is in
playback)
<MP3 Tag Information>
(only when MP3 file is in playback)
Title name information
Artist name information
Album name information
<HDMI Information>
(only for the images output through the HDMI
output)
Title Name
My Title
File Name
My File
Title Name
Artist Name
Album Name
480p / YCbCr
1
1
2
2
3
3
Video Info. :
Audio Info. : Bitstream
E9TF0ED_EN.book Page 13 Wednesday, March 17, 2010 1:32 PM
14
EN
While in the VCR mode, the on screen display of the VCR
mode is displayed.
Press [VCR] first.
Press [DISPLAY] to display the on screen display.
.
1 Current time
2Position number
3 Audio status of the receiving broadcast or
external equipment
4 Audio status of the currently playing back
videotape
5 Tape counter
6 Recording or playing back speed
7 Status of the current tape
Press [C] while viewing a DVB programme to display the
programme information.
1 Audio language
2 Channel number
3 Channel name
4 Current time and day
5 Next programme information
6 Current programme information
The window will automatically exit after 4 seconds, or press
[RETURN\BACK] to exit.
While the window appears, press [C] again to display more
information. Press [RETURN\BACK] to exit.
VCR
0:00:00 STEREO
AV2
STEREO
12:00
SP
7
11
22
33
44
55
7
66
This is an example screen for explanation.
Displayed items are depending on the actual mode.
INFO Menu
DVB
11:23 – 12:20
11:53 Mon
Stereo AD Sub Entertainment 27 min left
12:20 – 12:25
NOW:
13 Channel 4+1
English
NEXT:
Castle
Burning Questions
2
1
6
5
3
4
E9TF0ED_EN.book Page 14 Wednesday, March 17, 2010 1:32 PM
15
EN
Introduction Connections
Basic Setup /
TV View Operation
Playback Editing OthersFunction SetupRecording VCR Functions
Press [SETUP] to display the main menu. Then use [K \ L] to
select a menu and press [ENTER\OK] to display the sub
menu.
Press [RETURN\BACK] to return to previous screen.
E is displayed when a disc with CD-DA/MP3/JPEG/
Kodak Picture CD is inserted.
F is displayed when a USB flash memory with MP3/JPEG
is plugged.
1 Playback: [E Page 64]
2Display: [E Page 66]
3Video: [E Page 66]
4 Recording: [E Pages 30-31, 37, 41]
5Clock: [E Page 67]
6Channel: [E Pages 21-26]
7DivX: [E Pages 45, 68]
8 HDMI: [E Page 68]
9 DVB Setting: [E Page 69]
10 Reset All: [E Page 69]
1 Adult Lock: [E Page 69]
2 Maturity Lock: [E Page 69]
3Language: [E Page 69]
4 About: [E Page 69]
To programme a timer recording. [E Page 33]
To call up the title list. [E Page 54]
1 Format (DVD-RW only): [E Pages 30-31]
2 Finalise: [E Page 41]
3 Disc Protect (VR mode DVD-RW disc only):
[E Page 41]
4 Delete All Playlists (VR mode DVD-RW disc
only): [E Page 58]
Audio CD
1Random Play: [E Page 51]
2 Programme Play: [E Page 51]
CD-RW/-R with MP3 / JPEG / Kodak Picture CD files
3 Music (MP3 files): [E Page 51]
4 Photo (JPEG files): [E Pages 51, 52]
5 Slide Show (JPEG/Kodak Picture CD files):
[E Page 52]
1 Music (MP3 files): [E Page 51]
2 Photo (JPEG files): [E Pages 51, 52]
Main Menu
A General Setting
DVB Setting
1
1
2
2
3
3
4
4
5
5
A
B
C
D
E
6
6
F
Setup
Timer Programming
Title List
DVD Menu
General Setting
DISC Playback Mode
USB Playback Mode
1
2
3
4
5
6
7
8
9
10
HDMI
DVB Setting
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
TV System
Reset All
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
DVB Setting
Adult Lock
Maturity Lock
Language
General Setting
About
Reset All
1
2
3
4
B Timer Programming
C Title List
D DVD Menu
E DISC Playback Mode
F USB Playback Mode
1
2
3
4
Format
Finalise
Disc Protect OFF ON
Delete All Playlists
DVD Menu
1
2
DISC Playback Mode
Random Play
Programme Play
DISC Playback Mode
Music
Photo
Random Play
Slide Show
3
4
1
5
USB Playback Mode
Music
Photo
Random Play
Slide Show
2
1
E9TF0ED_EN.book Page 15 Wednesday, March 17, 2010 1:32 PM
16
EN
Front Panel Display Guide
1 DTV indicator
2 Title / Track and Chapter number
3 Current status of the unit
4 Displays the following
Playing back time
Current title / chapter / track / file number
Recording time / remaining time
•Clock
Channel number
One-touch Timer Recording (OTR) remaining time
Selected HDMI video resolution
Note
Except when satellite recording is in standby, front panel
display stays off while the power is off/timer-standby mode.
This is a new Power Save (ECO) feature.
The disc tray is opening.
The disc tray is closing.
A disc is loading.
Data is being recorded on a
disc.
Appears when the satellite
link recording is in standby.
Appears when HDMI video
resolution (480p) is
selected.
Appears when HDMI video
resolution (576p) is
selected.
Appears when HDMI video
resolution (720p) is
selected.
Appears when HDMI video
resolution (1080i) is
selected.
Appears when HDMI video
resolution (1080p) is
selected.
DB
DTV
DVD
VCR
4
3
2
1
: Appears when the channel is in digital mode.
: Title / track number
: Chapter number
F: Appears when playback is paused.
Appears during step by step playback.
B: Appears when playing back a disc.
F B: Appears during slow forward / reverse playback.
: Appears when the timer programming or One-
touch Timer Recording (OTR) is set and operating.
Appears when the unit goes into the satellite link
standby or recording mode.
Flashes when timer programming and satellite
recording was not executed because of some
error.
I: Appears during recording.
Flashes when recording being paused.
: Appears when a videotape is in this unit.
: Appears when a disc is in this unit.
: Appears during dubbing.
:Appears when this unit is in DVD output mode, or
the timer-standby mode for DVD recording.
:Appears when this unit is in VCR output mode, or
the timer-standby mode for VCR recording.
DB
DVD
V
CR
Display Messages
DVD
DVD
DVD
DVD
DVD
DVD
DVD
DVD
DVD
DVD
E9TF0ED_EN.book Page 16 Wednesday, March 17, 2010 1:32 PM
17
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
Connecting to a TV
Connect the unit to a TV after considering the capabilities of
your existing equipment.
Connect the antenna or cable to the ANTENNA
IN jack of this unit.
Connect the ANTENNA OUT jack of this unit to
the Aerial jack of your TV.
Connect AV1 (TV) Scart socket of this unit to
the Scart socket of your TV.
Note
If your TV does not have a Scart socket, use a Scart/RCA
cable to connect.
Connect this unit directly to the TV. If the AV cables are
connected to a VCR, pictures may be distorted due to the
copy protection system.
Analogue teletext can only be output in VCR mode through
AV1 (TV) out. Use TV remote control to decode the
analogue teletext.
When changing the “Video Out” setting (“SCART (RGB)”,
“Component (Interlace)” or “Component (Progressive)”),
connect to the corresponding jack on the TV. If the setting is
changed, for example, to “Component (Interlace)” or
“Component (Progressive)” while the scart cable is
connected to the TV, a distorted video signal may be output.
If your TV has component video input jacks, use a component
video cable (to connect the COMPONENT VIDEO OUT jacks)
and an audio cable (to connect the AUDIO OUT (L/R) jacks).
When using this type of connection, “Video Out” setting
should be set to “Component (Progressive)” or “Component
(Interlace)”. Refer to “B Video Out (Default: SCART (RGB))”
on page 67.
Component connection provides the better quality picture.
Connect the COMPONENT VIDEO OUT jacks of
this unit to the component video input jacks of
your TV.
Connect the AUDIO OUT (L\R) jacks of this unit
to the analogue audio input jacks of your TV.
After you have made the connections, set the “Video Out”
setting. (See page 67.)
Selecting Progressive Scan (576p/480p or
Interlaced 576i/480i) Playback
If your TV is compatible with progressive scanning (576p/
480p), connect the TV to the COMPONENT VIDEO OUT
jacks of this unit and set “Video Out” setting to “Component
(Progressive)” in “Setup” menu. (See page 67.) Next, set
your TV to the progressive scan mode.
If your TV is not compatible with progressive scan, set
“Video Out” setting to “Component (Interlace)”.
Use a commercially available adaptor if the video input jacks
of your TVs or monitors are the BNC type.
Only component and HDMI connections are compatible with
the Progressive Scan.
Connections
Before installation, unplug your TV and
this unit
Using the Scart socket
1
2
RF cable
(not supplied)
RF cable
(supplied)
Cable
Signal
or
To A er ia l ja ck
Antenna
1
2
Scart cable
(not supplied)
Scart/RCA cable (not supplied)
Audio/video cable
(not supplied)
Scart adaptor
(not supplied)
Using the COMPONENT VIDEO OUT
Jacks and the AUDIO OUT (L\R) Jacks
YPB/CB PR/CR
1
2
Audio IN
Component
video IN
Audio cable
(not supplied)
Component
video cable
(not supplied)
1
2
E9TF0ED_EN.book Page 17 Wednesday, March 17, 2010 1:32 PM
18
EN
[HDMI CONNECTION]
HDMI outputs the video / audio signals without converting to
analogue signals.
No audio connections is required.
Use the HDMI cable (commercially available) for connection.
Connect the HDMI output jack of this unit to the HDMI input
jack of TV.
Selecting HDMI video resolution
Press [HDMI] to select the HDMI video resolution. The video
resolution changes as follows every time [HDMI] is pressed.
576p (PAL) / 480p (NTSC) J 720p J 1080i J 1080p
(An HDMI video resolution that is not supported by the display
device will be skipped.)
For audio CD and MP3 files, 2 channel PCM will be output
regardless of the “Dolby Digital” setting.
If the connected device is not compatible with HDMI
BITSTREAM, audio will be output as PCM even if you select
“Stream” in “Dolby Digital” setting. (See page 65.)
Copyright protection system
To play back the digital video images of a DVD via an HDMI
connection, it is necessary that both the player and the display
device (or an AV amplifier) support a copyright protection
system called HDCP (high-bandwidth digital content
protection system). HDCP is copy protection technology that
comprises data encryption and authentication of the
connected AV device. This unit supports HDCP. Please read
the operating instructions of your display device (or AV
amplifier) for more information.
* HDMI: High Definition Multimedia Interface
Note
Because HDMI is an evolving technology, it is possible that
some devices with an HDMI input may not operate properly
with this unit.
When using an HDCP-incompatible display device, the
image will not be viewed properly.
Among the devices that support HDMI, some devices can
control other devices via the HDMI connector; however, this
unit cannot be controlled by another device via the HDMI
connector.
The audio signals from the HDMI connector (including the
sampling frequency, the number of channels and bit length)
may be limited by the device that is connected.
Among the monitors that support HDMI, some do not
support audio output (for example, projectors). In
connections with device such as this unit, audio signals are
not output from the HDMI output connector.
When this unit’s HDMI connector is connected to a DVI-D
compatible monitor (HDCP compatible) with an HDMI-DVI
conversion cable, the signals are output in digital RGB.
If the connected equipment is not compatible with HDMI
BITSTREAM, DTS sound will not be output.
When the power failure occurs, or when you unplug the unit,
some problems in the HDMI setting might occur.
Please check and set the HDMI setting again.
Using an HDMI Compatible Port
Actual Output Modes by Media
Audio recording format of
the disc
Dolby Digital / DTS /
MPEG setting of this
unit
Actual output
DVD-video
Dolby
Digital
PCM 2 channel PCM
Stream Dolby Digital
LPCM
PCM
2 channel PCM
Stream
DTS
®
ON DTS
®
OFF -
MPEG
PCM 2 channel PCM
Stream MPEG
DivX
®
Dolby
Digital
PCM 2 channel PCM
Stream Dolby Digital
MP3
PCM
2 channel PCM
Stream
MP2
PCM 2 channel PCM
Stream MPEG
HDMI IN
TV
To HDMI
input jack
this unit
HDMI cable (not supplied)
E9TF0ED_EN.book Page 18 Wednesday, March 17, 2010 1:32 PM
19
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
Connecting to External Equipment
This unit has three input terminals. Press [INPUT SELECT]
repeatedly to select the external input mode, then press
[PROG. G\H] repeatedly to select AV1, AV2 or DV(AV3).
Be sure that all the units are switched off before making
connections.
Note
When you record a TV programme from a Satellite Box /
decoder, you must connect a Scart cable to AV2 (DECODER).
(See page 36.)
The signal from the external device will be output
automatically when the TV is connected to AV1 and the
external device is connected to AV2 using a Scart cable with
its power on. (However, it will not be output when this unit’s
power is turned off.)
If you want to monitor this unit’s signal, press [DISPLAY]
or turn the external device off. (The signal from this unit can
only be monitored during playback.)
If you want to monitor the signal from other input, press
[DISPLAY], then press [INPUT SELECT] to select the
desired external input mode, then select the desired input
channel using [PROG. G\H].
When connecting a DV-camcorder, use DV-IN jack of DV(AV3)
(Front).
Digital Audio for Better Sound Quality
For clear digital sound quality, use the DIGITAL
AUDIO OUT (COAXIAL) jack to connect your digital
audio equipment.
If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a strong,
distorted sound or no sound at all.
Connecting multi-channel Dolby Digital decoder allows you
to enjoy the Multi-channel Dolby Digital surround system as
well as DTS decoder, Multi-channel surround system.
After connecting to a Dolby Digital decoder, set “Dolby
Digital” to “Stream” in “Audio Out” menu. (See pages 64-65.)
After connecting to a DTS decoder, set “DTS” to “ON” in
“Audio Out” menu. (See pages 64-65.)
After connecting to a MPEG decoder, set “MPEG” to
“Stream” in “Audio Out” menu. (See pages 64-65.)
The audio source recorded in Dolby Digital Multi-channel
surround format cannot be recorded using an MD or DAT
deck as a digital sound.
If not connected to a Dolby Digital decoder, set “Dolby
Digital” to “PCM” in “Audio Out” menu. Playing back a DVD
using incorrect settings may generate noise distortion and
damage speakers.
Set “Dolby Digital” and “MPEG” to “PCM” and set “DTS” to
“OFF” in “Audio Out” menu for connecting to an MD or DAT
deck.
You can use AUDIO OUT (L\R) jacks for the connection of
your audio system.
Recording from a DVD player, Satellite
Box or other Audio-Video equipment
with a Scart output socket (AV2)
Recording from a DV-camcorder
(DV(AV3))
AV output jack
(Scart)
Scart cable (not supplied)
AV2 (DECODER)
DV(AV3) (Front)
DV cable
(4-pin)
(not supplied)
DV OUT
The connections illustrated above are
optional for better sound
Connecting a Dolby Digital™ decoder,
DTS decoder or MPEG decoder
Connecting to an MD deck or DAT deck
COAXIAL
COAXIAL
Dolby Digital decoder,
DTS decoder or
MPEG decoder, etc.
Digital audio
input jack
Coaxial cable
(not supplied)
E9TF0ED_EN.book Page 19 Wednesday, March 17, 2010 1:32 PM
20
EN
Initial Setting
When you turn on this unit for the first time, you need to follow
these steps.
1 Press [STANDBY-ON Q].
2 Turn the TV on. Select the input to which the
unit is connected.
“Initial Setting” will automatically appear.
3 Select your desired language for the OSD using
[K \ L]. Then press [ENTER\OK] to go to the
next step.
4 Select your desired country for receiving your
local channels properly using [K \ L]. Then
press [ENTER\OK] to go to the next step.
This setting is mainly for digital channels.
Digital channels cannot be received properly for the
countries not listed above.
In such case, select “Other”.
5 Select your desired tuning type according to
your area using [K \ L], then press
[ENTER\OK].
The unit will start getting channels available in your area.
Digital tuning:
Only the DVB channels receivable in your area are
automatically scanned and memorised.
Digital & Analog tuning:
Both analogue and DVB channels receivable in your area
are scanned and memorised automatically.
Analog tuning:
Only the analogue channels receivable in your area are
automatically scanned and memorised.
If no channel has been memorised, the antenna
confirmation display will appear. Press [ENTER\OK] to start
auto scanning again or press [RETURN\BACK] to cancel
the initial settings.
6 After finishing channel setting, “Clock Setting”
will appear.
The current date and time will appear automatically.
If the current date and time are correct, press
[RETURN\BACK]
to exit, if they are incorrect, press
[ENTER\OK]
and follow to “
A
Clock Setting” on
page 67
.
Note
After “Initial Setting”, if you need to unplug the mains cable,
make sure to turn off the power first and leave it in standby
mode for at least 1 minute before attempting to unplug.
Otherwise, it may cause data loss.
If you want to set each item of “Initial Setting” again, you can
set them at “General Setting”.
Refer to “A OSD Language (Default: English)” on page 66.
Refer to “Country Setting” on page 23.
Refer to “Auto Tuning (DVB & ANALOG)” on page 21.
Refer to “Auto Tuning (ANALOG)” on page 21.
Refer to “Auto Tuning (DVB)” on pages 22-23.
Refer to “Clock” on page 67.
Also you can customize the memorised channel at “General
Setting”.
Refer to following pages for details.
Refer to “Manual Tuning (ANALOG)” on pages 21-22.
Refer to “Manual Tuning (DVB)” on page 23.
Refer to “Skip a Preset Channel” on page 22.
Refer to “Move” on page 22.
Use this feature to adjust the aspect ratio of the video source
which is different from your TV’s ratio to fit your TV monitor
without distorting the picture.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
2 Select “Video” using [K \ L], then press
[ENTER\OK].
3 Select “TV Aspect” using [K \ L], then press
[ENTER\OK].
4 Select the desired option using [K \ L], then
press [ENTER\OK].
5 Press [SETUP] to exit.
Basic Setup / TV View Operation
OSD Language
English
Áúëãàðñêè
Èesky
Français
Deutsch
Magyar
Country
France
Spain - Peninsula
Spain - Canary Islands
Germany
Italy
Switzerland
Czech Republic
Other
Auto Tuning
Make sure the antenna is
connected to “ANTENNA IN” jack.
Digital tuning
Digital & Analog tuning
Analog tuning
Selecting the TV Aspect Ratio
0 : 00
01 / 01 / 2010 (FRI)
Clock Setting
TV Aspect
Video Out
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
E9TF0ED_EN.book Page 20 Wednesday, March 17, 2010 1:32 PM
21
EN
Introduction Connections
Basic Setup /
TV View Operation
Playback Editing OthersFunction SetupRecording VCR Functions
Note
If you have a standard TV:
Select “4:3 Letter Box” for a full width picture with black
bars at the top and bottom.
Select “4:3 Pan & Scan” for a full height picture with both
sides trimmed.
If you have a wide screen TV:
Select “16:9 Wide”.
Channel Setting
You can retune this unit or edit the channel setting with
following methods.
Programme the tuner to scan both analogue and DVB
channels you can receive in your area.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
“General Setting” menu will appear.
2 Select “Channel” using [K \ L], then press
[ENTER\OK].
3 Select “Auto Tuning (DVB & ANALOG)” using
[K \ L], then press [ENTER\OK].
The unit will start storing channels available in your area.
Wait for several minutes to finish channel storing.
4 Press [SETUP] to exit.
You can select only the channels memorised in this unit
by using [PROG. G\H].
To cancel auto tuning
Press [SETUP] during scanning.
Note
The number of TV channels you can get is different depends
on your local area.
If the auto tuning is cancelled during scanning, some
channels not yet tuned may not be received.
Programme the tuner to scan only the analogue channels you
can receive in your area.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
2 Select “Channel” using [K \ L], then press
[ENTER\OK].
3 Select “ANALOG Channel Setup” using [K \ L],
then press [ENTER\OK].
4 Select “Auto Tuning” using [K \ L], then press
[ENTER\OK].
The unit will start storing channels available in your area.
Wait for several minutes to finish channel storing.
5 Press [SETUP] to exit.
You can select only the channels memorised in this unit
by using [PROG. G\H].
To cancel auto tuning
Press [SETUP] during scanning.
Note
The number of TV channels you can get is different depends
on your local area.
If the auto tuning is cancelled during scanning, some
channels not yet tuned may not be received.
When “Country” setting is set to “France”, sorting of TV
channels from 1 to 6 will be performed automatically as
follows.
You can preset an analogue channel manually and
individually.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
2 Select “Channel” using [K \ L], then press
[ENTER\OK].
3 Select “ANALOG Channel Setup” using [K \ L],
then press [ENTER\OK].
4 Select “Manual Tuning” using [K \ L], then
press [ENTER\OK].
5 Select “Position” using [K \ L], then press [1].
Auto Tuning (DVB & ANALOG)
DVB ANALOG
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
DVB Setting
Country
Auto Tuning (DVB & ANALOG)
DVB Channel Setup
ANALOG Channel Setup
Reset All
Auto Tuning (ANALOG)
ANALOG
1: TF1 2: F2 3: F3
4: CANAL+ 5: F5/ARTE 6: M6
Manual Tuning (ANALOG)
ANALOG
ANALOG Channel Setup
Auto Tuning
Manual Tuning
Move
Position
System
Channel
Decoder
Skip
1
L
1
OFF
ON
E9TF0ED_EN.book Page 21 Wednesday, March 17, 2010 1:32 PM
22
EN
6 Select the position number you want to use
using [the Number buttons] or [K \ L], then
press [0].
You can select position number 1-99.
•With [the Number buttons], you only need to enter the
last 2-digit numbers.
7 Select “System” using [K \ L], then press [1].
8 Select “L” or “BG” using [K \ L], then press [0].
If your system is SECAM-L, select “L”.
If your system is PAL-B/G, select “BG”.
9 Select “Channel” using [K \ L], then press [1].
10 Press [K \ L] to start scanning.
The tuner will begin to search up or down automatically.
When a channel is found, the unit will stop searching
and the picture will appear on the TV screen.
You can select a desired channel number using
[the Number buttons]. Refer to the following Channel
Plan table and press the three digits to select the
channel number. (To select channel 4, press [0] first and
then press [0] and [4]. Or press [4] and then “– – 4”
appears and wait for 2 seconds.)
If desired channel is found, press [0].
[L (SECAM-L)]
[BG (PAL-B/G)]
This unit can receive the Hyper and Oscar frequency
bands.
If you want to decode scrambled signals, select
“Decoder” using [K \ L], then press [1]. Select “ON”
using [K \ L], then press [0].
If “Skip” is set to “ON”, select “Skip” using [K \ L], then
press [1]. Select “OFF” using [K \ L], then press [0].
To store another channel, repeat steps
5 to 10.
11 Press [SETUP] to exit.
You can set the unit to skip channels. You can no longer
receive or watch when you access channels using
[PROG. G\H].
1 Follow steps 1 to 4 in “Manual Tuning
(ANALOG)” on pages 21-22.
2 Select “Position” using [K \ L], then press [1].
3 Select the position number using
[the Number buttons] or [K \ L], then press [0].
4 Select “Skip” using [K \ L], then press [1].
5 Select “ON” using [K \ L], then press [0].
To skip another channel, repeat steps 2 to 5.
6 Press [SETUP] to exit.
You can replace two channels.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
2 Select “Channel” using [K \ L], then press
[ENTER\OK].
3 Select “ANALOG Channel Setup” using [K \ L],
then press [ENTER\OK].
4 Select “Move” using [K \ L], then press
[ENTER\OK].
5 Select the position number to change the
channel using [K \ L], then press [ENTER\OK].
You cannot select a position number where “– – –”
appears next to the number, because “Skip” is set to “ON”
for that position number.
6 Move the channel to another position number
using [K \ L], then press [ENTER\OK].
To move another channel, repeat steps 5 to 6.
7 Press [SETUP] to exit.
You can programme the tuner to scan only the DVB channels
that you can receive in your area.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
2 Select “Channel” using [K \ L], then press
[ENTER\OK].
3 Select “DVB Channel Setup” using [K \ L], then
press [ENTER\OK].
Channel Plan
CH Indication TV Channel
1 – 10 F1 - F10
21 – 69 E21 – E69
74 – 86 B – Q
90 – 106 S4 – S20
121 – 141 S21 – S41
Channel Plan
CH Indication TV Channel
2 – 12 E2 - E12
13 – 20 A – H (only ITALY)
21 – 69 E21 – E69
74 – 78 X, Y, Z, Z+1, Z+2
80 – 99, 100 S1 – S20, GAP
121 – 141 S21 – S41
Skip a Preset Channel
ANALOG
Move
ANALOG
Auto Tuning (DVB)
DVB
E9TF0ED_EN.book Page 22 Wednesday, March 17, 2010 1:32 PM
23
EN
Introduction Connections
Basic Setup /
TV View Operation
Playback Editing OthersFunction SetupRecording VCR Functions
4 Select “Auto Tuning” using [K \ L], then press
[ENTER\OK].
The unit will start storing channels available in your area.
The tuner scans and memorises all the active DVB
channels (TV / Radio) in your area.
5 Press [ENTER\OK] to exit.
After auto tuning is completed, the lowest memorised
DVB channels appears on the screen.
You can use [PROG. G\H] to change the DVB
channels.
Note
If you press [RETURN\BACK] or [SETUP] during the
scanning, auto tuning will be cancelled.
You can preset a DVB channel manually and individually.
1 Follow steps 1 to 3 in “Auto Tuning (DVB)” on
pages 22-23.
2 Select “Manual Tuning” using [K \ L], then
press [ENTER\OK].
3 Select your desired position number using
[K \ L], then press [ENTER\OK].
The tuner will begin to search up or down automatically.
When a DVB channel is found, the unit will stop
searching.
When “Auto” is selected, the unit will search for the
channels which have not been stored in channels
memory.
4 Press [SETUP] to activate the setting.
This unit has “Service Update” function which searches and
stores newly available digital channels automatically at 8:00. If
a new channel is found, a message will appear on the screen
when you turn on the DVB channel at first time after storing a
new channel. Press any button to clear the message.
You can set the country for receiving your local channels
properly. This setting is mainly for digital channels.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
2 Select “Channel” using [K \ L], then press
[ENTER\OK].
3 Select “Country” using [K \ L], then press
[ENTER\OK].
4 Select your desired country using [K \ L], then
press [ENTER\OK].
Digital channels cannot be received properly for the
countries not listed above.
In such case, select “Other”.
5 Press [SETUP] to exit.
TV View Operation
The following operations are available while viewing TV
channels through this unit’s tuner.
To switch DVB, analogue and external input (AV1/AV2/
DV(AV3)) mode.
Press [INPUT SELECT] repeatedly to select DVB, analogue
or external input mode.
The mode changes as follows:
You can select external input mode (AV1/AV2/DV(AV3)) by
pressing [PROG. G\H] repeatedly.
The mode changes as follows:
You can select a channel using [PROG. G\H] or directly
enter the channel using [the Number buttons].
Notes on using [the Number buttons]:
For one or two-digit number channels, the channels will be
identified for 2 seconds after you press the channel number.
You can only select channels 1~899 (Digital) or
1~99 (Analogue).
If you cannot get a “Station Name” of Analogue channel, it is
not indicated with a channel number.
Manual Tuning (DVB)
DVB
Service Update
DVB
DVB Channel Setup
Edit Channels
Auto Tuning
Manual Tuning
Signal Information
100%
Progress
Channel Search
S.No. TV Channel
14
13
32
28
75
34
E4
More4
Film4+1
ITV4
CITV
SETANTA SPORT
102
729
728
Teletext Cars
RadioMusicShop
Heart
S.No. Radio Channel
Channel 69 UHF 858000KHz/8M
OK
Exit
RETURN
Back
Channel Auto
Country Setting
DVB ANALOG
Select a Channel
DVB ANALOG
Country
France
Spain - Peninsula
Spain - Canary Islands
Germany
Italy
Switzerland
Czech Republic
Other
DVB mode Analogue mode External input mode
AV1 AV2 DV(AV3)
External input mode (with [PROG. G\H] buttons)
E9TF0ED_EN.book Page 23 Wednesday, March 17, 2010 1:32 PM
24
EN
You can switch between TV audio modes by pressing
[AUDIO]. Each mode is indicated on the TV screen.
Audio mode during reception of analogue bilingual
broadcasts:
If the programme does not have more than one sound track,
[AUDIO] is not effective.
With “Quick Select” menu, you can select your favourite DVB
channel quickly. Refer to “Edit Group Lists” on page 24.
1 Press [ENTER\OK] while watching a DVB
channel.
“Quick Select” menu will appear.
2 Press [0 \ 1] to select your favourite group list.
(“All”, “Group 1” - “Group 8”)
“All” shows a list of all the memorised DVB channels.
If the favourite group does not have any channels, the
group will be skipped.
3 Select the DVB channel using [K \ L], then
press [ENTER\OK].
4 Press [RETURN\BACK] to exit.
With “Edit Channels” menu, you can sort all the memorised
DVB channels into the group lists (“Quick Select”) or set the
viewer limitation (“Adult Lock”), etc.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
2 Select “Channel” using [K \ L], then press
[ENTER\OK].
3 Select “DVB Channel Setup” using [K \ L], then
press [ENTER\OK].
4 Select “Edit Channels” using [K \ L], then
press [ENTER\OK].
“Edit Channels” menu will appear.
1 Channel number
2 Channel name
3 Channel setting
1 to 8: The number of the favourite group list
: Skip Channels
: Adult Lock
: Delete Channels
4 Channel information
5 Operation Guide
5 Press [RETURN\BACK] to exit.
You can sort each DVB channel into 8 different favourite group
lists (“Group 1” - “Group 8”). With “Quick Select” menu, you
can select your favourite DVB channel quickly. Refer to “Quick
Select” on page 24.
1 Follow steps 1 to 4 in “Edit Channels” on
page 24.
2 Select the DVB channel you want to add to the
favourite group list using [K \ L], then select
the number of the favourite group list you want
to add using [the Number buttons] ([1] - [8]).
The number you selected will appear.
•Press [0] to cancel from the favourite group list.
3 Press [RETURN\BACK] to exit.
Selecting the Audio Mode
ANALOG
Mode Audio output
Display on the
TV screen
Main Main audio from both speakers Main
Sub Sub audio from both speakers Sub
Main / Sub
Main audio from the left speaker
Sub audio from the right speaker
Main/Sub
Quick Select
DVB
Edit Channels
DVB
Quick Select
Group: All
S.No. Channel Name
2 Channel4
3 ITV2
4 ITV3
13 Channel4+1
19 More4
28 ITV4
29 E4
View
Exit
OK
RETURN
Edit Group Lists
DVB
Edit Channels
S.No. Channel Name
5
Five
Fav. Skip Lock Del.
2
France Réseau Numéril 562000kHz/8M
Re Name Skip Lock Delete
OK
Move
1...8
RETURN
Exit
0
Add To Fav.
Del. Fav.
1
5
2
4
3
Edit Channels
S.No. Channel Name
5
Five
Fav. Skip Lock Del.
2
France Réseau Numéril 562000kHz/8M
Re Name Skip Lock Delete
OK
Move
RETURN
Exit
1...8
Add To Fav.
0
Del. Fav.
E9TF0ED_EN.book Page 24 Wednesday, March 17, 2010 1:32 PM
25
EN
Introduction Connections
Basic Setup /
TV View Operation
Playback Editing OthersFunction SetupRecording VCR Functions
You can set the unit to skip the unwanted DVB channels when
you use [PROG. G\H].
1 Follow steps 1 to 4 in “Edit Channels” on
page 24.
2 Select the DVB channel you want to skip using
[K \ L], then press [GREEN].
” will appear.
•Press [GREEN] to cancel. “ ” will disappear.
3 Press [RETURN\BACK] to exit.
You can set the unit to limit the access to the DVB channels.
1 Follow steps 1 to 4 in “Edit Channels” on
page 24.
2 Select the DVB channel you want to limit the
access using [K \ L], then press [YELLOW].
” will appear.
•Press [YELLOW] to cancel. “ will disappear.
3 Press [RETURN\BACK] to exit.
Once you turn off the unit, Pincode will be required to
view the locked channels.
To set the Pincode, refer to “A Adult Lock (Default:
OFF)” on page 69.
Note
You need to set the Pincode first to activate the “Adult Lock”
in “DVB Setting”. After you set a Pincode, you have to turn
off the power and then turn it on again to activate the setting.
You can delete the DVB channels from the memorised DVB
channels.
1 Follow steps 1 to 4 in “Edit Channels” on
page 24.
2 Select the DVB channel you want to delete
using [K \ L], then press [BLUE].
” will appear.
•Press [BLUE] to cancel. “ ” will disappear.
3 Press [RETURN\BACK] to exit.
The channel has been deleted from the “Edit Channels”
menu.
You can change the order of the DVB channels when you use
[PROG. G\H].
1 Follow steps 1 to 4 in “Edit Channels” on
page 24.
2 Select the DVB channel you want to change the
position using [K \ L], then press [ENTER\OK].
Pop up window will appear.
3 Select the channel you want to replace with
using [K \ L], then press [ENTER\OK].
The channel will be replaced.
4 Press [RETURN\BACK] to exit.
Skip Channels
DVB
Adult Lock
DVB
Edit Channels
S.No. Channel Name
5
Five
Fav. Skip Lock Del.
France Réseau Numéril 562000kHz/8M
Re Name Skip Lock Delete
OK
Move
RETURN
Exit
1...8
Add To Fav.
0
Del. Fav.
Edit Channels
S.No. Channel Name
5
Five
Fav. Skip Lock Del.
France Réseau Numéril 562000kHz/8M
Re Name Skip Lock Delete
OK
Move
RETURN
Exit
1...8
Add To Fav.
0
Del. Fav.
Delete Channels
DVB
Channel Move
DVB
Edit Channels
S.No. Channel Name
5
Five
Fav. Skip Lock Del.
France Réseau Numéril 562000kHz/8M
Re Name Skip Lock Delete
OK
Move
RETURN
Exit
1...8
Add To Fav.
0
Del. Fav.
Edit Channels
S.No. Channel Name
5
Five
Fav. Skip Lock Del.
France Réseau Numéril 562000kHz/8M
Re Name Skip Lock Delete
OK
Move
RETURN
Exit
1...8
Add To Fav.
0
Del. Fav.
S.No. Channel Name
Five
QVC
UKTV GOLD
bid tv
price - drop tv
UKTV STYLE
E4+1
5
16
17
23
24
26
34
E9TF0ED_EN.book Page 25 Wednesday, March 17, 2010 1:32 PM
26
EN
You can edit the DVB channel names as you want.
1 Follow steps 1 to 4 in “Edit Channels” on
page 24.
2 Select the DVB channel you want to edit the
name using [K \ L], then press [RED].
Name editing display will appear.
3 Edit the name using [the Number buttons].
•Press [the Number buttons] repeatedly until the
desired letter appears.
•Press [0 \ 1] to move the cursor left or right.
•Press [RED] to select alphabet or numbers.
•Press [GREEN] to select capital or small letters.
•Press [YELLOW] to move the letter on the cursor to the
right.
•Press [BLUE] to delete the letter on the cursor, and
move the cursor to the left.
4 After completion, press [ENTER\OK].
5 Press [RETURN\BACK] to exit.
Note
You can enter up to 19 letters.
You can check the detailed information of the current DVB
channel.
1 Follow steps 1 to 3 in “Auto Tuning (DVB)” on
pages 22-23.
2 Select “Signal Information” using [K \ L], then
press [ENTER\OK].
“Signal Information” display will appear.
3 Press [RETURN\BACK] to exit.
“Signal Information” is not available for analogue
channel and external input (AV1/AV2/DV(AV3)).
“Signal Information” is also not available while the
Pincode input field for locked DVB channel is displayed.
If a broadcaster provides a DVB Teletext service, you can
enjoy it.
The DVB Teletext service includes news, weather forecast
and subtitles.
1 Press [TEXT] to display Teletext screen.
Teletext for the TV channel will be displayed.
2 Use [RED] / [GREEN] / [YELLOW] / [BLUE] to
follow the instructions on screen.
3 Press [TEXT] to switch the Teletext display off.
Note
[TEXT] is not available during recording.
Many DVB channels transmit Multi Audio information along
with their DVB channels. You can select the desired audio
mode and audio language.
1 While viewing a DVB programme, press
[AUDIO].
2 Select “Stereo”, “Left” or “Right” using [0 \ 1].
3 Select your desired audio language using
[K \ L].
The available audio language varies depending on the
DVB programmes.
4 Press [ENTER\OK] to activate the settings.
Note
If the programme is changed, the audio language will be
switched back to the default language you set in the “DVB
Setting”. Refer to “C Language” on page 69.
Edit Channel Names
DVB
Signal Information
DVB
S.No. Channel Name
Edit Channels
S.No. Channel Name
5
Five
Fav. Skip Lock Del.
France Réseau Numéril 562000kHz/8M
Re Name Skip Lock Delete
OK
Move
RETURN
Exit
1...8
Add To Fav.
0
Del. Fav.
@_
@$# ABC
A to Z
DEF
GHI JKL MNO
PQRS TUV WXYZ
SPACE
0-9
a-z
INS DEL
1 2 3
4 5 6
7
8
9
0
51%
77%
Signal Information
5 Five
Réseau Numéri
Frequency
Bandwidth
20:00 - 20:58
20:58 - 21:00
France
594000KHz
8M
The Property List; Perfect Villa
Five News at 9
A.PID
V. PI D
P. PI D
6018
6017
6017
Signal
Quality
RETURN
Back
T I
Teletext Reception
DVB
Multi Audio
DVB
11:53 MON
English
French
Spanish
Multi Audio
Stereo
30_BasicSetup.fm Page 26 Friday, April 9, 2010 4:37 PM
27
EN
Introduction Connections
Basic Setup /
TV View Operation
Playback Editing OthersFunction SetupRecording VCR Functions
Many DVB channels transmit Subtitle information along with
their DVB channels. You can retrieve and display it on the TV
screen.
1 While viewing a DVB programme, press
[SUBTITLE].
If the programme has no subtitle information,
“No Information.” will appear.
2 Select “ON” or “OFF” using [0 \ 1].
3 Select your desired subtitle language using
[K \ L].
The available subtitle language varies depending on the
DVB programmes.
4 Press [ENTER\OK] to activate the settings.
Note
If the programme is changed, the subtitle language will be
switched back to the default language you set in the “DVB
Setting”. Refer to “C Language” on page 69. If the default
subtitle language is not available on the new programme, no
subtitle will be displayed.
Electronic programme guide (EPG) gives you a list of the DVB
programmes and detailed information about the programmes.
To call up EPG while viewing DVB/analogue channel or
external input (AV1/AV2/DV(AV3)), press [GUIDE]. You can
also call up EPG by following steps.
1 In stop mode, press [SETUP]. Select “Timer
Programming” using [K \ L], then press
[ENTER\OK].
2 Select “EPG” using [K \ L], then press
[ENTER\OK].
Select the channel and TV programme using
[K \ L \ 0 \ 1].
•Press [ENTER\OK] or [BLUE] to go to “Timer
Programming” menu after you select the TV programme
using [K \ L \ 0 \ 1]. Refer to “Timer Recording (EPG)”
on page 36.
e.g.) Weekly Mode
1 EPG menu mode
2 Programme you select now
3 Channel name
4 Time / Date
5 Programme name
•Press [RETURN\BACK] to exit.
•Press [RED] to display “Daily Mode”.
•Press [GREEN] to display “Weekly Mode”.
•Press [E \ D] to move to the previous or the next day.
•Press [C] to display “Service Information”.
1 Language displayed on the screen
2 Parental Lock rating
3 Information about the programme
Note
EPG cannot be displayed during recording.
Subtitle
DVB
11:53 MON
English
French
Subtitle
ON
EPG (Electronic Programme Guide)
DVB
EPG [Weekly Mode]
14:05-14:35 Style Her Famous
Mon 17/05 13:30 14:00 14:30 15:00
Mon Tue Wed Thu Fri Sat Sun Mon
ITV1
ITV2
ITV3
Channel 4+1
More4
ITV4
E4
13:38 Mon 17/05
Timer
OK
Watch
i +
Info
RETURN
Exit
24Hrs
Daily Weekly
Heartbeat Club Reps
The jeremy Kyle Show
artbeat Kavanagh QC
... A
T
The Enforcer
r No Deal
The Simp Style Her F Joan of Arcadia
Hill StreER
The jeremy Kyle
The Champions The Professionals
1
2
3
5
4
Service Information
14:35 - 15:30 John of Arcadia
Language: English
Parental Rating: 4
14 : 52 Mon 17/05
Brand New Series - Game Theory;
Adam becomes jealous of Joan’s and Roger; will sees
A dark side of Lucy;
And Helen Questions her commitment to Catholicism.
RETURN
Back
1
2
3
E9TF0ED_EN.book Page 27 Wednesday, March 17, 2010 1:32 PM
28
EN
Information on DVD Recording
This unit can record on DVD-RW/-R discs.
DVD-RW discs allow you to record programmes repeatedly,
and the recorded contents can be erased.
There are 2 recording formats: VR mode and video mode. VR
and video modes are available for DVD-RW discs while as
only video mode is available for DVD-R discs.
Video mode is the same recording format as used on the pre-
recorded DVD-videos you purchase in local shops. You can
play back the discs recorded in this format in most of the DVD
players. You will need to finalise such discs (see page 41)
before playing them back in other DVD players. Unless
finalised, you can record additional materials or edit discs
recorded in video mode with this unit. VR (Video Recording)
mode is a basic recording format for DVD-RW discs.
VR mode offers advanced editing, and you can record and
edit material repeatedly, however it is playable only on VR
mode compatible unit. Finalisation is recommended before
playing them back in other unit.
You can select a recording speed from 5 options.
The recording time will vary depending on the recording
speed you select as follows.
This table is intended for a standard new single-sided
12 cm / 8 cm disc. The recording times are estimates and
actual recording time may differ.
The audio and video quality becomes poorer as the
recording time gets longer.
You cannot record copy-protected video using this unit. Copy-
protected video includes DVD-videos and some satellite
broadcasts.
If copy-protected material is detected, recording will pause or
stop automatically and an error message appears on the
screen.
You can only record “Copy-once only” video using a DVD-RW
disc in VR mode with Content Protection for Recordable
Media (CPRM).
When recording a TV broadcast or an external input, you can
display copy control information on the screen.
CPRM is a scrambling copy protection system for the
protection of “copy-once” broadcast programmes.
This unit is CPRM compatible, which means that you can
record copy-once broadcast programmes, but you cannot
then make a copy of those recordings. CPRM recordings can
only be played back on DVD players that are specifically
compatible with CPRM.
Some satellite broadcasts include copy-protected information.
If you want to record them, refer to the following.
Note
This unit cannot record on CD-RW/-R discs.
Discs recorded on a personal computer or a DVD or CD
recorder may not be played back if the disc is damaged or
dirty or if there is condensation on the recorder’s lens.
If you record a disc using a personal computer, even if it is
recorded in a compatible format, it may not be played back
or dubbed because of the settings of the application
software used to create the disc. (Check with the software
publisher for more detailed information.)
Discs recorded in video mode on this unit cannot record
additional information using other DVD recorders.
Since recording is performed using the Variable Bit Rate
(VBR) method, the actual remaining time for recording may
be a little shorter than the remaining time displayed on the
OSD, depending on the picture you are recording.
Recording
Type of Discs
Recording Speed
Recording
speed
Recording time
Video / Sound
Quality
DVD
12 cm
DVD
8 cm
1H 60 min 18 min
2H 120 min 36 min
4H 240 min 72 min
6H 360 min 108 min
8H 480 min 144 min
Restrictions on Recording
Information on Copy Control
DVD-RW
DVD-RW
DVD-RW
VR
DVD-RW
DVD-RW
DVD-RW
Video
DVD-R
DVD-R
DVD-R
VCR
VCR
Media type / format
Copy-
free
Copy-
once
Copy-
prohibited
: Recordable
: Not recordable
ver. 1.1 / ver. 1.2
ver. 1.1 / ver. 1.2 CPRM compatible
ver. 1.1 / ver. 1.2
ver. 1.1 / ver. 1.2 CPRM compatible
ver. 2.0 / ver. 2.1
E9TF0ED_EN.book Page 28 Wednesday, March 17, 2010 1:32 PM
29
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
After recording, you must finalise the disc to play it back in other players. (See page 41.)
You cannot finalise discs in other DVD recorders.
VR mode DVD:
99 titles per each Playlist and Original
999 chapters per each Playlist and Original
Video mode DVD:
99 titles per disc
99 chapters per title
Making Discs Playable in Other DVD Players (Finalise)
Disc Type DVD-R
DVD-RW
Video Mode VR Mode
After finalising
Automatic Title menu making
✔✔
Undo finalising (See page 41.)
✔✔
Additional recording or editing (See page 41.)
(undo finalise)
(undo finalise)
: Available Grey: Not available
Maximum Recordable Numbers of Title /
Chapters
E9TF0ED_EN.book Page 29 Wednesday, March 17, 2010 1:32 PM
30
EN
Formatting a Disc
When inserting a brand-new DVD-RW disc, the unit
automatically starts to initialise the disc. DVD-RW disc will be
formatted either video or VR mode according to the recording
format mode setting of the unit. Before inserting a brand-new
DVD-RW disc, you need to set the recording format to the
desired mode. You can also manually format a DVD-RW disc
once it has been used.
1 In stop mode, press [SETUP].
2 Select “DVD Menu” using [K \ L], then press
[ENTER\OK].
3 Select “Format” using [K \ L], then press
[ENTER\OK].
4 Select “Format Mode” using [K \ L], then press
[ENTER\OK].
5 Select “Video mode” or “VR mode” using
[K \ L], then press [ENTER\OK].
6 Press [SETUP] to exit.
7 Insert a blank disc.
Formatting will start.
8 Formatting is complete.
“100%” is indicated.
Note
The recording format setting is effective only for DVD-RW
discs. You cannot change the recording format for a DVD-R
disc.
You cannot mix two formats on one DVD-RW disc.
If you insert a disc that has been formatted before, the
recording format is not changed if you select another format
in the “Setup” menu only. To reformat a disc (change disc
format type), refer to “Reformatting a Disc Manually” on
page 30.
You can set aspect ratio for video mode recording.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
2 Select “Recording” using [K \ L], then press
[ENTER\OK].
3 Select “Aspect Ratio (Video mode)” using
[K \ L], then press [ENTER\OK].
4 Select your desired setting using [K \ L], then
press [ENTER\OK].
5 Press [SETUP] to exit.
Note
For VR mode DVD-RW disc, the image will be recorded in
whichever the ratio that the programme you record is
broadcasted with, regardless of the “Aspect Ratio (Video
mode)” setting.
The unit inserts a chapter mark periodically (every 10 minutes
by default) during recording. Using the Auto Chapter menu,
you can set this function off or change the time period.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
2 Select “Recording” using [K \ L], then press
[ENTER\OK].
3 Select “Auto Chapter” using [K \ L], then press
[ENTER\OK].
4 If you want to set “Auto Chapter” off, select
“OFF” using [K \ L], then press [ENTER\OK].
If you want to change the time period for “Auto
Chapter”, select the required time period using
[K \ L], then press [ENTER\OK].
5 Press [SETUP] to exit.
Note
The interval for auto chapter may be up to 2 minutes
different from the time option you set.
While recording, no more chapter mark will be added after
coming up to the maximum chapter mark number.
If you use a DVD-RW disc, you can format the disc by
performing “Format”. You can format DVD-RW disc for either
video mode recording or VR mode recording.
Note
When you reformat the disc, the contents of the disc are
erased.
Make sure that the recording format is set to the desired
mode. (Refer steps
1 to 6 in “Choosing the Recording
Format of a Blank DVD-RW Disc” on page 30.)
Choosing the Recording Format of a
Blank DVD-RW Disc
Setting Aspect Ratio for Video Mode
Recording
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
Format Mode
Video mode
VR mode
Video mode
DVD Player Compatibility mode.
VR mode
Editing possibility mode.
DVD-RW
DVD-RW
DVD-RW
Video
DVD-R
DVD-R
DVD-R
Auto: It will be recorded with whichever the ratio that the
programme you started to record is broadcasted
with.
4:3 : Recorded with the aspect ratio of 4:3.
16:9 : Recorded with the aspect ratio of 16:9.
Setting Auto Chapter
Reformatting a Disc Manually
4 : 3
16 : 9
Aspect Ratio (Video mode)
Auto
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
Auto Chapter
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
E9TF0ED_EN.book Page 30 Wednesday, March 17, 2010 1:32 PM
31
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
Insert a recordable disc.
1 In stop mode, press [SETUP].
2 Select “DVD Menu” using [K \ L], then press
[ENTER\OK].
3 Select “Format” using [K \ L], then press
[ENTER\OK].
4 Select “Start” using [K \ L], then press
[ENTER\OK].
A pop up window will appear and prompt you to confirm.
5 Select “Yes” using [K \ L], then press
[ENTER\OK].
e.g.) VR mode DVD-RW
Formatting will start.
If you want to cancel formatting, select “No”.
6 Formatting is complete.
Note
It is not possible to use a disc formatted with another DVD
recorder. The disc needs to be reformatted with this unit. But
this unit may not be able to reformat some discs that are not
previously formatted by this unit (e.g. DVD disc formatted by
PC or another recorder).
Selecting the Audio Mode
This unit can receive bilingual broadcasts.
You can switch between modes by pressing [AUDIO]. Each
mode is indicated on the TV. When you record a DVB channel,
only output sound channel will be recorded.
When the external input audio is a bilingual broadcast, you
can choose “Stereo” or “Bilingual” to record on a DVD. This
setting is only for recording external input (AV1/AV2).
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
2 Select “Recording” using [K \ L], then press
[ENTER\OK].
3 Select “External Input Audio” using [K \ L],
then press [ENTER\OK].
4 Select “Stereo” or “Bilingual” using [K \ L],
then press [ENTER\OK].
5 Press [SETUP] to exit.
Note
If you select “Stereo”:
The audio will be recorded as “stereo audio”.
If you select “Bilingual”:
The audio will be recorded as “bilingual audio”. (See “Setting
Bilingual Recording Audio” on page 31 for more detail.)
You can select either “Main” or “Sub” audio to record a
bilingual broadcast in video mode.
This setting is only for recording analogue channel.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
2 Select “Recording” using [K \ L], then press
[ENTER\OK].
3 Select “Bilingual Recording Audio” using
[K \ L], then press [ENTER\OK].
4 Select “Main” or “Sub” using [K \ L], then
press [ENTER\OK].
5 Press [SETUP] to exit.
Note
If you want to record onto a VR mode disc, both “Main” and
“Sub” will be recorded regardless of your setting here. And
when you play back, you can choose either audio format or a
combination of both as your playback audio.
You can enjoy high quality sound recording. This function
works only when the recording speed is set at 1H.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
2 Select “Recording” using [K \ L], then press
[ENTER\OK].
3 Select “Recording Audio Select (1H)” using
[K \ L], then press [ENTER\OK].
4 Select “PCM” or “Dolby Digital” using [K \ L],
then press [ENTER\OK].
5 Press [SETUP] to exit.
Note
“PCM” stands for Pulse Code Modulation. It changes
analogue sound to digital sound without compressing audio
data.
When the recording speed is set at other than 1H, the unit
records “Dolby Digital” audio automatically even if you
selected “PCM”.
Setting External Input Audio
Are you sure?
Yes
No
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
External Input Audio
Stereo
Bilingual
Setting Bilingual Recording Audio
Recording Audio Select (1H)
PCM: Records PCM audio for the best quality
sound.
Dolby Digital: Records Dolby Digital audio for good
quality sound.
DVD-RW
DVD-RW
DVD-RW
Video
DVD-R
DVD-R
DVD-R
Bilingual Recording Audio
Main
Sub
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
Recording Audio Select (1H)
PCM
Dolby Digital
E9TF0ED_EN.book Page 31 Wednesday, March 17, 2010 1:32 PM
32
EN
Basic Recording and One-touch Timer
Recording (OTR)
Follow the steps below to record a TV programme.
(See page 70 for VCR recording.)
1 Press [STANDBY-ON Q] to turn on the unit.
Turn on the TV and be sure to select the input to which the
unit is connected.
Press [DVD].
2 Press [OPEN\CLOSE EJECT A] to open the
disc tray.
3 Place the disc on the disc tray with its label
facing up. Be sure to align the disc with the disc
tray guide.
4 Press [OPEN\CLOSE EJECT A] to close the
disc tray.
5 Select the recording speed using [REC SPEED].
(See page 28.)
6 Press [INPUT SELECT] to select DVB, analogue
or external input mode, then select the desired
channel to record using [PROG. G\H] or
[the Number buttons].
Press [REC] to start recording.
The “I” mark will be displayed on the TV screen briefly.
To pause the recording, press [PAUSE F]. Press
[PAUSE F] or [REC] again to restart the recording.
This is a simple way to set the recording time in blocks of
30 minutes. Check that the disc you are recording onto
has enough space remaining for the time you set. (See
page 70 for VCR recording.)
Press [REC] repeatedly until the desired
recording time (30 minutes to 8 hours) appears
on the TV screen.
One-touch Timer Recording will start.
When the unit reaches the specified time, it will be
turned off automatically.
To change the recording length during One-touch Timer
Recording, press [REC] repeatedly until the desired
length appears.
To cancel One-touch Timer Recording within the
specified time, press [STOP C].
8 Press [STOP C] to stop the recording.
This operation may take a few moments to complete.
Note
You can change the channel while in the REC pause mode.
Recording continues until the disc is full or you stop the
recording.
If the clock is not set, the date and time of title names will be
01/01/10 and 00:00.
You cannot change the recording speed in the REC or REC
pause mode.
Even if the broadcasting you are recording is in the SECAM
system, this unit automatically converts it to the PAL system
when recording.
Up to 99 titles can be recorded on the DVD-RW/-R discs.
You can play back a title on one component while making a
recording on the other component. To do so, simply select
the component (DVD or VCR) you want to use for the
playback by pressing [DVD] or [VCR] during DVD / VCR
recording. And then follow the normal playback procedure.
NTSC recording is prohibited in this unit.
The remaining recording time will appear on the TV screen
during One-touch Timer Recording. Press [DISPLAY] to see
it on the TV screen.
The remaining recording time will be displayed on the front
panel display during One-touch Timer Recording.
Unlike the timer recording, you can perform the following
operations during One-touch Timer Recording.
- Turn off the power. (One-touch timer recording will be
cancelled.)
-Use [REC] or [STOP C] on the remote control.
You cannot use the pause function during One-touch Timer
Recording.
The unit will be turned off automatically under the following
conditions.
- No space remains on the disc.
- If a power failure occurs.
If DVD One-touch Timer Recording is completed during
VCR playback or recording, the DVD will be in stop mode
and the VCR keeps the current mode.
When One-touch Timer Recording is finished and the power
is turned off, the unit will switch to the timer-standby mode
automatically if a timer recording has been programmed.
Press [TIMER SET] to cancel the timer-standby mode to
use the unit continuously.
DVB ANALOG
7 Basic Recording:
One-touch Timer Recording (OTR):
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
Disc tray guide
0:30
8:00 7:30
1:00
Normal
Recording
E9TF0ED_EN.book Page 32 Wednesday, March 17, 2010 1:32 PM
33
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
Timer Recording
You can set the unit to record up to 12 programmes, up to a
month in advance. Daily or weekly programme recordings are
also available.
Be sure to set the clock before entering a timer
programming.
Insert a recordable disc or a tape with a record tab.
1 In stop mode, press [TIMER PROG.].
“Timer Programming” list will appear.
2 Select “New Programme” using [K \ L], then
press [ENTER\OK].
If there are 6 programmes or more, use
[SKIP H \ G] to turn the page.
3 Enter the date using [K \ L], then press [1].
Each time you press [L] at the current date, the timer
recording date will change as follows.
e.g., 1st January
Analogue channel is indicated as “ATV”.
4 Enter the time to start and to end using [K \ L],
then press [1].
5 Select the digital (DVB) / analogue (ATV) mode
or external input (AV1/AV2) using [K \ L], then
press [1].
6 Select the channel number to record using
[K \ L], then press [1].
7 Select the recording media (“DVD” or “VCR”)
using [K \ L], then press [1].
8 Select the recording speed using [K \ L], then
press [1].
Refer to “Recording Speed” on page 28 for DVD or
page 70 for VCR.
Select “STTL” to “ON” or “OFF” using [K \ L].
If you set “STTL” to “ON”, subtitle will be recorded too.
When analogue channel is selected, “VPS/PDC” will be
displayed instead of “STTL”.
Select “VPS/PDC” to “ON” or “OFF” using
[K \ L].
Refer to “VPS (Video Programme System) / PDC
(Programme Delivery Control)” on page 34.
When DVB channel is selected, “STTL” will be displayed
instead of “VPS/PDC”.
VPS/PDC system is not available for “Daily” and “M-F”
timer programme.
10 Press [ENTER\OK] when all information
required is entered.
Your programme setting is stored.
To set another programme, repeat steps
2 to 10.
To exit, press [TIMER PROG.].
When 2 or more programmes are overlapped, “Timer
programme overlapped” appears, and the overlapped
programme will be displayed in blue. To correct the timer
programme, refer to “Checking, Cancelling or Correcting
the Timer Programming Information” on page 34.
11 Press [TIMER SET] to set a timer programming.
Front panel display stays off while the unit is in the
standby mode.
DVB ANALOG
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
VCR
VCR
1/1
20/05
21/05
7:00
9:00
9:00
9:30
DVB 18
DVB 190
Timer Programming
Date
Start
End
CH
STTL
VPS/PDC
New Programme
0:00 MON 17/05
01/01
Daily
M-F (Mon.-Fri.)
W-SAT
W-FRI
W-SUN
31/01
Timer Programming
1/1
0:00 MON 17/05
Date
REC To
Speed
STTL
Start End CH
DVD 2H OFF
--:-- --:-- DVB 10
2H 2:00
20/05
9 For DVB channel recording:
For analogue channel recording:
1/1
20/05
21/05
22/05
7:00
9:00
17:00
9:00
9:30
18:00
DVB 18
DVB 190
1 TF1
0:00 MON 17/05
Timer Programming
Date Start End CH
New Programme
STTL
VPS/PDC
E9TF0ED_EN.book Page 33 Wednesday, March 17, 2010 1:32 PM
34
EN
Note
If you have not set the clock, the clock setting window will
appear instead of the Timer Programming list. Continue
from “A Clock Setting” on page 67 before programming the
timer.
•Press [K \ L] to move the cursor in “Timer Programming”
list.
If a basic recording or One-touch Timer Recording is in
progress on one component (e.g. VCR) and the timer
recording set for the other component (e.g. DVD) is about to
begin, the unit automatically switches to the programmed
channel for timer recording 2 minutes before the
programmed starting time, and the recording in progress (for
VCR) will be cancelled UNLESS their recording channels
are the same. If their recording channels are the same, the
timer recording will start without cancelling the recording
currently in progress. In this case, the recording of the same
channel will be made on both DVD and VCR.
Cancel the timer-standby mode by pressing [TIMER SET] to
use the component currently in timer-standby mode. When
finished operating, press [TIMER SET] to resume the timer-
standby mode.
In the timer-standby mode, you can turn on the power and
use the component (VCR or DVD) which is not currently
timer-programmed.
The Video Programme System (VPS) or Programme Delivery
Control (PDC) assures that the TV programmes you have
programmed for timer recording are recorded exactly from
beginning to end, even if the actual broadcasting time differs
from the scheduled time due to a delayed start or extension of
the programme duration. Furthermore, if a programme is
interrupted, the recording will also be interrupted
automatically and resumed when the programme starts again.
If the VPS/PDC signal drops out because the broadcast signal
is weak, or if a broadcasting station does not transmit a
regular VPS/PDC signal, the timer recording is performed in
normal mode (without VPS/PDC) even if it was programmed
for VPS/PDC. If the starting time of the VPS/PDC timer
recording is between 0:00 and 3:59 on a given day, the VPS/
PDC function will operate from 20:00 on the previous day to
4:00 on the next day. If the starting time of the VPS/PDC timer
recording is between 4:00 and 23:59 on a given day, the VPS/
PDC function will operate from 0:00 on the given day to 4:00
on the next day. This means that if the relevant programme is
broadcasted within this period, it is recorded correctly. If the
timer is not programmed correctly, the incorrect timer setting
stays in effect unless you cancel it. To cancel an incorrect
timer setting, refer to “Checking, Cancelling or Correcting the
Timer Programming Information” on page 34.
Note
This feature is only available for analogue channels.
1 Press [TIMER SET] to cancel the timer-standby
mode.
2 Press [TIMER PROG.].
“Timer Programming” list will appear.
3 A) To delete the timer programme:
1) Select the programme you want to delete using
[K \ L], then press [ENTER\OK].
2) Select “Delete” using [K \ L], then press
[ENTER\OK].
Confirmation window will appear.
3) Select “Yes” using [K \ L], then press [ENTER\OK].
B) To correct the timer programme:
1) Select the programme you want to correct using
[K \ L], then press [ENTER\OK].
2) Select “Programme Change” using [K \ L], then press
[ENTER\OK].
3) Correct the timer programme by using [K \ L \ 0 \ 1],
then press [ENTER\OK].
4 Press [TIMER PROG.] to exit.
5 Press [TIMER SET] to return to the timer-
standby mode.
To check the timer programming in progress
Press [TIMER PROG.].
Note
If a timer recording is proceeding, that programme is
highlighted in red. In such a case, you cannot select any
other programmes.
When you check the timer programming in progress by
pressing [TIMER PROG.] during operations of the
component (DVD or VCR) which is not currently used for the
timer recording, the programme will not be highlighted. In
this case, you cannot select other programmings.
On the front panel:
Press [STOP C].
On the remote control:
1Press [STOPC].
2 Select “Yes” using [K \ L], then press
[ENTER\OK].
The error number appears on “Timer Programming” list.
The error programme will be displayed in grey with an error
number.
VPS (Video Programme System) / PDC
(Programme Delivery Control)
Checking, Cancelling or Correcting the
Timer Programming Information
Stop the Timer Recording in Progress
If the Timer Programming did not
Complete Correctly
1/1
E40
17/05 7:00 9:00
1 TF1
17/0510:00
Date Start End CH
Timer Programming
STTL
VPS/PDC
MON
New Programme
E9TF0ED_EN.book Page 34 Wednesday, March 17, 2010 1:32 PM
35
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
The error numbers indicate:
Timer programme with an error number will be cleared once
the entry screen for the programme is displayed.
If there is a power failure or the unit is unplugged for more
than 30 seconds, the clock setting and all timer settings will
be lost.
If a disc is not inserted or if a inserted disc is not recordable
(finalised DVD-RW/-R, a fully recorded disc, etc.), the DVD
on the front panel display will flash and the timer recording
will not occur. Insert a recordable disc.
If there is no tape or a tape with a record tab is not in the
cassette compartment, the VCR on the front panel display
will flash and the timer recording cannot be performed.
Please insert a recordable tape.
After all timer recordings have completed, if you want to play
back or eject the recorded disc, press [TIMER SET], and
then press [PLAY B] or [OPEN\CLOSE EJECT A].
The timer recording cannot be performed in DVD and VCR
at the same time. If you set two programmings with the same
channel and time both in DVD and VCR, the programming
that has priority will be recorded.
You cannot make any DVD operation during DVD timer
recording.
You cannot make any VCR operation during VCR timer
recording.
Timer recording whose recording time exceeds 12 hours
cannot be made.
When 2 or more programmes are overlapped, “Timer
programme overlapped” appears, and the overlapped
programme will be displayed in blue. To correct the timer
programme refer to “Checking, Cancelling or Correcting the
Timer Programming Information” on page 34.
If the Start time is earlier and the End time is later than the
current time, the recording will start immediately after you
press [TIMER SET].
If a videotape ends during the timer recording, the unit will
automatically stop, eject the videotape, and turn itself off. To
continue recording, insert a recordable tape.
Priority of overlapped settings
The unit records programmes according to priority if the timer
programmes overlap.
If the starting time is same:
The timer programming set first (PROG. 1) has priority.
When the starting time and the ending time for each
programmes are different:
A programme that has earlier start time has priority.
If the recording time is partially overlapped:
The timer programming with the earlier start time (PROG. 2)
has priority. PROG. 1 will start after PROG. 2 recording is
complete.
If the recording time entirely overlaps:
The shorter timer programming (PROG. 1) is not recorded.
Note for DVD recording
If the recording time of two programmes are overlapped, or
the End time of a programme and the Start time of another is
same, the first 2 minutes (at the longest) of the subsequent
programme will be cut off.
If the End time of the programme currently being
recorded and the Start time of the subsequent
programme are same:
If PROG. 1 is a DVD recorded programme, the beginning of
the PROG. 2 may be cut off.
* If the cut off time exceeds 3 minutes, the error number “E40”
will appear in “Timer Programming” list.
E1–E22, E37–E39 Recording error
E23–E24 Unrecordable disc
E25/E51 Copy prohibited programme
Cannot record because of the NTSC /
PAL-60 signal is received.
E26–E28 Copy prohibited programme
E29 Disc protected
E30 Disc full
E31 Already recorded 99 titles (video mode)
E32 Already recorded 99 titles (VR mode)
E33 Already recorded 999 chapters
E34 No space for Control Information
E35 PCA (Power Calibration Area) full
E36 Already finalised video format disc
E40 There are some unrecorded parts due
to the overlapped timer programmes.
Recording did not start at the start
time.
E41 Power failure
E42 No disc
E45 Copy prohibited programme
Notes for the Timer Recording
PROG. 2
recording will start
after PROG. 1
recording is
completed.
Actual
recording
The first 2 minutes (at the longest) will be cut off.
PROG. 2
PROG. 1
PROG. 1
PROG. 2
The first 2 minutes (at the longest) will be cut off.
PROG. 2
PROG. 1
PROG. 3
PROG. 1
PROG. 3
PRO
G. 2
Actual
recording
The first 2 minutes (at the longest) will be cut off.
Actual
recording
PROG. 2
PROG. 1
PROG. 2
PROG. 1
Actual
recording
PROG. 2
PROG. 1
PROG. 2
Actual
recording
The first 2 minutes (at the
longest) will be cut off.*
PROG. 2
PROG. 1
PROG. 2PROG. 1
E9TF0ED_EN.book Page 35 Wednesday, March 17, 2010 1:32 PM
36
EN
Timer Recording (EPG)
With EPG system, you can programme DVB channel
recording much easier. You can only choose one programme
and enter the selection.
Refer to “EPG (Electronic Programme Guide)” on page 27.
1 While viewing a DVB programme, press
[GUIDE].
List of DVB programmes will be displayed.
e.g.) Daily Mode
Press [RED] to display “Daily Mode”.
Press [GREEN] to display “Weekly Mode”.
2 Select a desired programme using
[K \ L \ 0 \ 1], then press [ENTER\OK] or
[BLUE].
3 Set “End”, “REC To”, “Speed” and “STTL”
using [K \ L \ 0 \ 1], then press [ENTER\OK].
4 Press [TIMER SET] to return to the timer-
standby mode.
Note
EPG timer recording will stop if the broadcaster sends the
EPG programme end or if you press [STOP C] on the front
panel or press [STOP C] on the remote control, then select
“Yes” using [K \ L], then press [ENTER\OK].
If “Auto Clock Setting” is “OFF”, “Timer Recording (EPG)”
may not be able to perform.
If you select a programme that is broadcasting in progress,
“Watch” is indicated next to . When you press
[ENTER\OK], you can watch the selected programme.
If you select a programme that is not broadcasted yet,
“Timer” is indicated next to . When you press
[ENTER\OK], you can set “Timer Recording”.
Satellite Link
You can set the unit to start recording whenever it detects the
video scart control from the external tuner.
Preparing for the satellite link timer recording:
[Preparation of the external tuner]
The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set it
to be turned on when it comes to the time you want to
start recording, and off when it comes to the time you
want to finish recording. (Refer to the tuner’s manual on
how to set the timer.)
Make sure to turn off the external tuner when you finish
setting.
[Preparation of this unit]
Make sure to select the desired recording speed
beforehand.
1 In stop mode, press [DVD]/[VCR] to select the
DVD mode or the VCR mode, then select the
recording speed using [REC SPEED].
2 Press [SAT.LINK].
“Sat” will appear on the front panel display and the unit
goes into the satellite link standby mode.
To cancel the satellite link function in the satellite link
standby mode:
Press [TIMER SET] or [SAT.LINK] to turn on the unit.
To cancel the satellite link function while the satellite link
recording is in progress:
On the front panel
Press [STOP C].
On the remote control
1 Press [STOP C].
2 Select “Yes” using [K \ L], then press [ENTER\OK].
DVB
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
EPG [Daily Mode]
13:35-14:05 The Simple Life
Mon 17/05
ITV1
ITV2
ITV3
Channel 4+1
More4
ITV4
E4
13:35-14:05
14:05-14:35
14:35-15:30
15:30-16:25
16:25-17:00
17:00-17:30
17:30-18:30
The Simple Life
Style Her Famous
Joan of Arcadia
Smallville
Hollyoaks
Friends
Friends
13:38 Mon 17/05
Timer
OK
Watch
i +
Info
RETURN
Exit
24Hrs
Daily Weekly
OK
OK
Scart cable (not supplied)
External tuner
(not supplied)
DVD
E9TF0ED_EN.book Page 36 Wednesday, March 17, 2010 1:32 PM
37
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
Note
If you have not set the clock, the clock setting window will
appear and follow to “A Clock Setting” on page 67.
You cannot set the End time for the satellite link timer
recording on this unit.
Recording picture will be distorted if the copy protection
signal is being detected during satellite link timer recording.
When a regular timer recording and the satellite link timer
recording are overlapped, the examples are given below.
Settings for External Equipment
When you record from external equipment or copy a
videotape to a DVD disc, you can set the format Auto, PAL or
SECAM.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
2 Select “Recording” using [K \ L], then press
[ENTER\OK].
3 Select “Video Colour System” using [K \ L],
then press [ENTER\OK].
4 Select “Auto”, “PAL” or “SECAM” using [K \ L],
then press [ENTER\OK].
5 Press [SETUP] to exit.
Note
During recording, when a signal other than PAL or SECAM
is detected, an error message appears on the screen and
recording will be paused. Recording will be resumed when a
PAL or SECAM signal is detected.
Before recording from external equipment, see page 19 for
connection instructions.
1 Turn on the TV and be sure to select the input to
which the unit is connected.
Press [DVD].
Press [OPEN\CLOSE EJECT A] to open the
disc tray, then place the disc to record on.
Press [OPEN\CLOSE EJECT A] again to close
the disc tray.
Example 1
Example 2
Example 3
Timer
Recording
Satellite Link
Actual
Recording
Timer
Recording
Satellite Link
Actual
Recording
Timer
Recording
Satellite Link
Actual
Recording
Video Colour System
Auto: The video colour system will be set
automatically according to the recording
material.
PAL: The video colour system will be set to PAL.
SECAM: The video colour system will be set to
SECAM.
Recording from External Equipment
2 When you want to record to the disc:
Auto Finalise
Aspect Ratio (Video mode)
Bilingual Recording Audio
Dubbing Mode
External Input Audio
Video Colour System
Auto Chapter
Recording Audio Select (1H)
HDMI
DVB Setting
Reset All
General Setting
Video Colour System
Auto
PAL
SECAM
Playback
Display
Video
Clock
Channel
DivX
Recording
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
VCR
VCR
E9TF0ED_EN.book Page 37 Wednesday, March 17, 2010 1:32 PM
38
EN
Press [VCR].
Insert a videotape with a record tab into the
cassette compartment.
3 Select the input terminal to which the external
equipment is connected (AV1 or AV2).
Press [INPUT SELECT] repeatedly to select the external
input mode, then press [PROG. G\H] repeatedly to
select AV1 or AV2.
4 Select a recording speed using [REC SPEED].
Refer to “Recording Speed” on page 28 for DVD or page
70 for VCR.
5 Press [RECORD I] (DVD / VCR) on the unit to
start recording.
6 Press the [PLAY B] button on the external
equipment.
Press [STOP C] on the unit to stop
recording.
Press
[STOP\EJECT CA] on the unit to stop
recording.
Note
During recording, recording will be paused when a signal
other than PAL or SECAM is detected. (See “Video Colour
System” on page 37 for details.)
The signal from the external device will be output automatically
when the TV is connected to AV1 and the external device is
connected to AV2 using a Scart cable with its power on.
(However, it will not be output when this unit’s power is turned off.)
If you want to monitor this unit’s signal, press [DISPLAY]
or turn the external device off. (The signal from this unit can
only be monitored during playback.)
If you want to monitor the signal from other input, press
[DISPLAY], then press [INPUT SELECT] to select the
desired external input mode, then select the desired input
channel using [PROG. G\H].
Information on DV Dubbing
This function helps you to dub the contents in the DVC (digital
video camcorder) to DVD or VCR easily. (See page 71 for
DVC to VCR Dubbing.)
You can control basic operations of the DVC from the remote
control of this unit if the DVC is in video mode.
1 Connect your DVC to the DV-IN jack on the front
panel using a DV cable. (Use the DV cable that
has 4-pin input jack and is compliance with the
IEEE 1394 standards.)
2 Press [INPUT SELECT] repeatedly to select the
external input channel, then press
[PROG. G\H] repeatedly to select DV(AV3).
3 Press [DISPLAY] to display the DVC information
on the screen.
When the DVC is in video mode...
When the DVC is in camera mode...
The menu changes according to the mode of DVC.
Switch the mode on the DVC to video mode for the dubbing
information.
1DV icon
2 Indicator of active device
With “Control” highlighted, press [ENTER\OK] to display
the available devices to control with the remote control
of this unit. Select the device you want to operate using
[K \ L], then press [ENTER\OK].
- Select “DVD” to control this unit with the remote control
of this unit.
- Select “DVC” to control your DVC with the remote
control of this unit.
3 Recording audio mode
“DV Audio” can be changed. With “DV Audio” selected,
press [ENTER\OK] to display “DV Audio” menu. Select
the audio you want to output using [K \ L], then press
[ENTER\OK].
- Select “Stereo1” to dub the stereo sound.
- Select “Stereo2” to dub the sound that was added after
the recording.
- Select “Mix” to dub the stereo1 and stereo2.
4 Command menu
“Start Rec” or “Pause Rec” will appear.
5 External input channel
6 Product name of your DVC
If the unit cannot recognise the input signal from the
DVC or if it is the unknown product, “No Device” or “****”
will appear instead.
When you want to record to a videotape:
7 For disc:
For videotape:
Guide to DV and On-Screen Display
The following instructions are described with the
operations using the remote control of this unit.
DV
AB-1234
0:12:34
1/ 1 1/ 1
D VD 2H 2:00
-
R W VR ORG
2
3
1
4
T C
Cont r ol D VD
D V A udio Stereo1
Sta r t Rec
DV
AB-1234
0:12:34
1/ 1 1/ 1
-
R W VR ORG
D VD 2H 2:00
7
5
6
T C
E9TF0ED_EN.book Page 38 Wednesday, March 17, 2010 1:32 PM
39
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
7 Status of the current operation and the time
counter
Each icon means (Available icons may vary depending on
the DVC):
DVC to DVD Dubbing
Before recording from DVC, see page 19 for connection
instructions. (See page 71 for DVC to VCR Dubbing.)
Press [DVD] first.
1 Press [INPUT SELECT] repeatedly to select the
external input channel, then press
[PROG. G\H] repeatedly to select DV(AV3).
2 Press [REC SPEED] to select a recording
speed. (See page 28.)
3 Press [DISPLAY].
4 With “Control” highlighted, press [ENTER\OK]
to display the available devices to control with
the remote control of this unit. Select “DVC”
using [K \ L], then press [ENTER\OK].
e.g.) DVC to DVD dubbing
Now you can operate your DVC with the remote control of
this unit.
5 Press [PLAY B] to start playing back the DVC,
and find where you want to start dubbing.
Press [STOP C] when it comes to the desired
start point.
6 Select “Start Rec” using [K \ L], then press
[ENTER\OK].
The dubbing will start.
1) Select “Control” using [K \ L], then press
[ENTER\OK].
2) Select “DVD” using [K \ L], then press
[ENTER\OK].
3) Press [STOP C].
Note
The tape will rewind a few seconds when you press
[ENTER\OK] at step
6 so that the dubbing starts exactly
where you press [PAUSE F] instead of [STOP C] at step
5.
The unit does not send out the output signal to DVC.
For the proper operation, connect DVC to the unit directly.
Do not connect this unit and DVC via any other unit.
Do not connect more than one DVC.
The unit can only accept DVC. Other DV device such as
cable/satellite box or D-VHS recorder cannot be recognised.
If no video signal is detected from the DVC during DVC to
DVD dubbing, the recording will be paused and “I” will flash
on the TV screen. The recording will resume when the unit
detects the video signal again.
When the DVC is in camera mode, refer to “Guide to DV and
On-Screen Display” on page 38.
Date / time and cassette memory data will not be recorded.
Pictures with a copy-guard signal cannot be recorded.
A DV terminal is a terminal that can use the transmission
mode conforming to the IEEE 1394 standards called
“Fire Wire”. It serves as the interface that connects the PC
and peripheral device such as “i.LINK” (registered trademark
of SONY). It enables digital dubbing between DV devices
with little degradation.
DVC is in stop mode.
DVC is in playback mode.
DVC is in pause mode.
DVC is fast forwarding. (standard speed)
DVC is fast forwarding. (faster than above)
DVC is fast forwarding. (faster than above)
DVC is slow forwarding. (standard speed)
DVC is slow forwarding. (faster than above)
DVC is slow forwarding. (faster than above)
DVC is fast forwarding. (in stop mode)
DVC is fast reversing. (in stop mode)
DVC is fast reversing. (standard speed)
DVC is fast reversing. (faster than above)
DVC is fast reversing. (faster than above)
DVC is in slow reverse playback.
DVC is in recording.
DVC is in recording pause mode.
Please also read the operating instructions of your
DVC for more information.
Preparing for DV dubbing (DVC to DVD):
Insert a recordable DVD.
Make sure your DVC is in video mode.
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
AB-1234
0:00:00
DV
To stop dubbing:
AB-1234
0:00:00
DV
1/ 1 1/ 1
D VD 2H 2:00
-
R W VR ORG
T C
D V A udio Stereo1
Sta r t Rec
Cont r ol D VD
E9TF0ED_EN.book Page 39 Wednesday, March 17, 2010 1:32 PM
40
EN
Dubbing Mode
You can copy a DVD disc to a videotape or copy a videotape
to a DVD disc. This function will be possible only if the DVD or
the videotape is not copy protected.
Before dubbing, prepare for the recording on the DVDs or the
videotape. See pages 28-29 (DVD) or page 70 (VCR).
The videotape’s record tab is intact.
The videotape is long enough to record the DVD disc.
The DVD disc is satisfied with the recording status. See
pages 28-29.
Insert a disc and a videotape with a record tab.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
2 Select “Recording” using [K \ L], then press
[ENTER\OK].
3 Select “Dubbing Mode” using [K \ L], then
press [ENTER\OK].
Option window will appear.
4 Select “VCR A DVD” using [K \ L], then press
[ENTER\OK].
5 Press [SETUP] to exit.
6 Press [VCR].
7 Press [PLAY B], and then press [PAUSE F]
where you want to start recording.
8 Press [DVD].
Make sure to select a recording speed using
[REC SPEED]. (See page 28.)
9 Press [DUBBING].
VCR to DVD duplication will start.
10 Press [STOP C] to stop the recording.
Note for VCR to DVD duplication:
During duplication, recording will be paused when a
signal other than PAL or SECAM is detected. (See
“Video Colour System” on page 37 for details.)
After starting VCR to DVD duplication, the picture may
be distorted because of the auto tracking function. This
is not a malfunction. Be advised to play back the tape
until the picture is stabilised, then set the starting point
at which you want to start recording, and start VCR to
DVD duplication.
This unit will automatically stop the duplication if
playback with no image detected for more than 3
minutes during VCR to DVD duplication.
If the playback sound mode of VCR is set to “STEREO”,
“LEFT” or “RIGHT”, the sound mode upon dubbing is
automatically switched to “STEREO”. If the playback
sound mode is set to “MONO”, the sound mode upon
dubbing is also “MONO”.
If you set “External Input Audio” to “Stereo”, the sound is
recorded in “Stereo” (video mode and VR mode).
While in video mode, if you set “External Input Audio” to
“Bilingual”, the audio set in “Bilingual Recording Audio”
mode is recorded. While in VR mode, if you set
“External Input Audio” to “Bilingual”, bilingual audio is
recorded.
The main and sub audio will be simultaneously recorded
(VR mode). You can select audio modes during
playback.
If you want to watch the duplicated material, after the
VCR to DVD duplication, press [DVD] first then press
[PLAY B].
4 Select “DVD A VCR” using [K \ L], then press
[ENTER\OK].
5 Press [SETUP] to exit “Setup” menu.
6 Press [DVD].
7 Press [PLAY B], and then press [PAUSE F] at
the point you want to start recording.
8 Press [VCR].
Make sure to select a recording speed using
[REC SPEED]. (See page 70.)
Rewind or fast forward the tape to the point where you
want to start recording.
9 Press [DUBBING].
DVD to VCR duplication will start.
10 Press [STOP C] to stop the recording.
Note
NTSC dubbing is prohibited in this unit.
Dubbing mode is available only if the tape or disc is not
copy-protected.
You cannot change the output mode during VCR to DVD or
DVD to VCR duplication.
If you want to watch the duplicated material, after the DVD to
VCR duplication, press
[VCR]
first and then press
[PLAY B]
.
When “DV” is selected as input, DUBBING function cannot
be performed. DUBBING can be performed with either AV1
or AV2 inputs.
Note for recording to a videotape:
Note for recording to a disc:
VCR to DVD
General Setting
Auto Chapter
Recording Audio Select (1H)
Auto Finalise
Aspect Ratio (Video mode)
Dubbing Mode
Bilingual Recording Audio
External Input Audio
Playback
Display
Video
Clock
Channel
DivX
HDMI
DVB Setting
Reset All
Recording
Video Colour System
Dubbing Mode
VCR DVD
DVD VCR
DVD to VCR
General Setting
Auto Chapter
Recording Audio Select (1H)
Auto Finalise
Aspect Ratio (Video mode)
Dubbing Mode
Bilingual Recording Audio
External Input Audio
Video Colour System
Playback
Display
Video
Clock
Channel
DivX
HDMI
DVB Setting
Reset All
Recording
Dubbing Mode
VCR DVD
DVD VCR
E9TF0ED_EN.book Page 40 Wednesday, March 17, 2010 1:32 PM
41
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
Setting a Disc to Protect
To prevent accidental over-recording, editing or erasing of
recordings, you can protect them using “Setup” menu.
Insert a recordable disc.
1 In stop mode, press [SETUP].
2 Select “DVD Menu” using [K \ L], then press
[ENTER\OK].
3 Select “Disc Protect OFF A ON” using [K \ L],
then press [ENTER\OK].
4 Select “Yes” using [K \ L], then press
[ENTER\OK].
The disc is protected.
5 Press [SETUP] to exit.
Note
The Disc Protect setting is available only when a disc
recorded in VR mode is inserted.
You can select only “Disc Protect ON A OFF” when a
protected disc is inserted.
To cancel the disc protect:
Select “Disc Protect ON A OFF” at step
3, then select “Yes”.
If you insert a disc protected with this unit, “Disc Protect
ON A OFF” will appear instead of “OFF A ON”.
Finalising Discs
You will need to finalise discs to play them back in other units.
Finalising may take from several minutes up to an hour.
A shorter recording period on the disc will require a longer
time period for finalisation. Do not unplug the mains cable
during finalisation.
Insert a recordable disc before finalising.
1 In stop mode, press [SETUP].
2 Select “DVD Menu” using [K \ L], then press
[ENTER\OK].
3 Select “Finalise” using [K \ L], then press
[ENTER\OK].
4 Select “Yes” using [K \ L], then press
[ENTER\OK].
Finalising will start.
To cancel finalising (DVD-RW disc only):
At step
4, press [STOP C]. Select “Yes” using [K \ L],
then press [ENTER\OK]. Finalising is cancelled and the
unit switches to stop mode.
If “ ” appears when [STOP C] is pressed, you cannot
cancel finalising because the finalising has already
reached at a critical point in its process.
If “No” is selected and [ENTER\OK] or [RETURN\BACK]
is pressed, finalising is continued.
You cannot cancel finalising a DVD-R disc once it has
started.
5 Finalising is complete.
Note
Finalising a disc in video mode automatically creates a Title
menu.
After you finalise DVD-RW/-R disc, you can edit or record
only on a video mode disc.
To release the finalisation of the disc, select “Undo Finalise”
at step
3.
If you insert a DVD-RW disc finalised with this unit,
“Undo Finalise” will appear instead of “Finalise”.
DO NOT power off during finalising. This may result in a
malfunction.
You can finalise discs automatically when the disc space runs
out if you set this in “Setup” menu.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
2 Select “Recording” using [K \ L], then press
[ENTER\OK].
3 Select “Auto Finalise” using [K \ L], then press
[ENTER\OK].
4 Select “ON” using [K \ L], then press
[ENTER\OK].
5 Press [SETUP] to exit.
Note
Auto finalise function is not available for discs formatted in
VR mode disc.
DVD-RW
DVD-RW
DVD-RW
VR
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
Finalise disc?
Yes
No
Auto Finalise
10%
Do you want to cancel?
Yes
No
Finalising
DVD-RW
DVD-RW
DVD-RW
Video
DVD-R
DVD-R
DVD-R
Auto Finalise
ON
OFF
E9TF0ED_EN.book Page 41 Wednesday, March 17, 2010 1:32 PM
42
EN
Basic Playback
The contents of a DVD are generally divided into titles. Titles
are further subdivided into chapters depend on Auto Chapter
setting (See page 30).
1 Press [STANDBY-ON Q] to turn on the unit.
Turn on the TV and be sure to select the input to which the
unit is connected.
2 Press [DVD].
3 Press [OPEN\CLOSE EJECT A] to open the
disc tray.
4 Place the disc on the disc tray with its label
facing up. Be sure to align the disc with the disc
tray guide.
5 Press [OPEN\CLOSE EJECT A] to close the
disc tray.
6 Press [TOP MENU] to display the Title list.
You can switch between the “Original” and “Playlist” in the
VR mode DVD-RW disc using [MENU\LIST].
7 Select the desired title using [K \ L \ 0 \ 1],
then press [ENTER\OK].
Pop up window will appear.
8 Select “Play From Start” using [K \ L], then
press [ENTER\OK].
Playback will start.
9 Press [STOP C] to stop playback.
To eject the disc, press [OPEN\CLOSE EJECT A] to
open the disc tray, then remove the disc. Press
[OPEN\CLOSE EJECT A] to close the disc tray before
turning off the unit.
Note
For DVD-R (video mode) and DVD-RW (video mode) discs
that are already finalised, a Title menu will be displayed
instead of thumbnails.
You can resume playback from where you stopped playing
back the disc (Resume playback).
See page 47 for details.
You can also start playback by pressing [PLAY B ] instead of
[ENTER\OK] at steps
7 and 8.
Some discs may start playback automatically.
1 Follow steps 1 to 5 in “Playing Back a DVD-RW /
DVD-R Disc” on page 42.
2 Press [PLAY B] to start playback.
Playback will start.
If you play back a DVD-video, a disc menu may appear.
See page 46 for details.
3 Press [STOP C] to stop playback.
Note
Some discs may start playback automatically.
1 Follow steps 1 to 5 in “Playing Back a DVD-RW /
DVD-R Disc” on page 42.
2 If you want to play back an audio CD or a disc
with a single file type (e.g., a disc containing
MP3 files only), skip to step 4.
If you want to play back a disc with mixed file
types, proceed to step 3.
3 Select the desired file type using [K \ L], then
press [ENTER\OK].
If you want to change the media type, press [0]. Select
the desired media type using [K \ L], then press
[ENTER\OK]. (You can also access the media type
selection screen from the “Title List” in the “Setup” menu
in stop mode.)
Video Files: The DivX
®
File List will appear.
Music: The MP3 File List will appear.
Photo: The JPEG File List will appear.
Playback
Note for DVD Playback
Playing Back a DVD-RW /
DVD-R Disc
Start Rec. Stop Rec./Start Rec. Stop Rec.
Title 1 Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
Disc tray guide
Playing Back a DVD-V
Playing Back an Audio CD or a Disc with
MP3 / JPEG / DivX
®
Files
DVD-V
DVD-V
DVD-V
CD
CD
CD
MP3
MP3
MP3
JPEG
JPEG
JPEG
DivX
DivX
®
DivX
®
E9TF0ED_EN.book Page 42 Wednesday, March 17, 2010 1:32 PM
43
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
4 Press [K \ L] to select the desired track / file or
folder, then press [ENTER\OK].
e.g.) Photo (JPEG) files
If a track / file is selected:
Playback will start.
If a folder is selected:
The files in the folder will appear.
Press [K \ L] to select the file or folder you want, then
press [ENTER\OK].
You can also call up the file type selection screen by
following the steps below;
In stop mode, press [SETUP]. Select “Title List” using
[K \ L], then press [ENTER\OK]. Select the media type
using [K \ L], then press [ENTER\OK].
To exit the File List, press [TOP MENU] or press
[STOP C].
To resume the File List, press [TOP MENU].
•Press [PLAY B], [ENTER\OK] or [1] to move to any
lower folders.
•Press [0] to move back to the folder above.
Note for audio CD tracks and MP3 / JPEG files:
Folders are shown with the icon.
Audio CD tracks are shown by .
MP3 files are shown with the icon.
Playback will start from the selected track and continue
with each one after.
JPEG files are shown with the icon.
The unit can recognise up to 255 folders and up to 99
tracks / 999 files.
Letters of a file / folder name overflowing the given
space will be displayed as “...”.
Unplayable folders and tracks / files may be displayed
depending on the recording conditions.
For MP3 file recorded in Variable Bit Rate (VBR), the
unit may not display the actual elapsed time.
If there are no files in the folder, “No Files” is displayed.
High resolution or large-size JPEG files take a few
moments to be displayed.
It is not possible to play back progressive JPEGs (JPEG
files saved in progressive format) on this unit.
It is not possible to play back JPEG files of 12 MB or
more.
It is recommended that files to be played back in this unit
are recorded under the following specifications:
[MP3]
[JPEG] Size of picture
Note
Files with extensions other than “.mp3 (MP3)” or “.jpg /
.jpeg (JPEG)” will not be listed in the File List.
Some folders or tracks listed in the File List may be unplayable
due to their recording status.
The File List displays only up to 8 folders and file names.
Notes on JPEG:
After file is displayed for 5 seconds or 10 seconds (set in the
“Slide Show” on page 52), the display moves to the next file.
During JPEG playback, press [1] or [0] to rotate a picture 90
degrees clockwise or counterclockwise respectively. (Not
available when the display menu appears.)
You can play back the contents in a USB device.
Sampling frequency : 44.1 kHz or 48 kHz
Constant Bit Rate : 112 kbps to 320 kbps
Upper limit : 6,300 x 5,100 dots
Lower limit : 32 x 32 dots
Capacity limit : less than 12 MB
1/ 2
A
B
File List
DISC NAME
JPEG file1
JPEG file2
JPEG file3
JPEG file4
JPEG file5
JPEG file6
Playing Back a USB Device with MP3 /
JPEG / DivX
®
Files
Note for DivX
®
•DivX
®
files recorded in USB device are not guaranteed to
play back.
Note for USB device
The unit cannot play back a USB device at the following
condition.
- During the operation of the disc tray.
- During the disc loading, DVD recording, DVD/CD
playback, editing or dubbing.
- While “Title List” or “File List” of disc is displayed.
- While “Setup”, “Timer Programming” or “EPG” menu is
displayed.
Do not disconnect the USB device while the indicator on
the device is flickering.
USB device requirements:
USB version 2.0 (Full Speed).
USB devices formatted with the FAT16 and FAT32 file
systems are supported.
Up to 8 characters (excluding the extension) are displayed
as a file and folder names. 9 or more characters cannot
be displayed.
Files with extensions other than “.mp3 (MP3)”, “.jpg
(JPEG)” or “.avi (DivX
®
)” will not be listed in the File List.
The maximum supply current from the USB port is up to
500 mA.
Compatible device:
USB flash memory (max. 32 GB)
Incompatible device:
•USB hub
USB device with inner hub
•PC
Cameras
Devices that need to install drivers
(e.g. some MP3 players)
Bus-powered HDD
MP3
MP3
MP3
JPEG
JPEG
JPEG
DivX
DivX
®
DivX
®
E9TF0ED_EN.book Page 43 Wednesday, March 17, 2010 1:32 PM
44
EN
1 In stop mode, plug your USB flash memory.
File type selection screen will appear.
2 Select the desired file type using [K \ L], then
press [ENTER\OK].
If you want to change the media type, press [0]. Select
the desired media type using [K \ L], then press
[ENTER\OK]. (You can also access the media type
selection screen from the “Title List” in the “Setup” menu
in stop mode.)
Video Files: The DivX
®
File List will appear (not
guaranteed).
Music: The MP3 File List will appear.
Photo: The JPEG File List will appear.
3 Follow the step 4 in “Playing Back an Audio CD
or a Disc with MP3 / JPEG / DivX
®
Files” on
pages 42-43.
The Picture CD is a service to convert photographs taken by a
conventional film camera into digital data and write the data
on a CD. You can enjoy picture images on the TV set by
playing back the Picture CDs.
For details of Kodak Picture CD, contact a shop that provides
developing service of Kodak Inc.
Press [DVD] first.
1 Press [TOP MENU].
To exit the Picture CD thumbnail List, press
[TOP MENU], [STOP C] or [RETURN\BACK].
If all menu items cannot be displayed in the screen scope,
the A appears at the right bottom and the R appears at
the left bottom of the screen and you can view other items
on the next or previous page. The track number of the
items currently played back is highlighted.
If the A is shown at the right bottom, use [SKIP G] to
view the next page. If the R is shown at the left bottom,
use [SKIP H] to view the previous page.
It may take some time until all menu items are displayed
on the menu screen.
2 Press [K \ L \ 0 \ 1] to select a desired track to
be played back, then press [PLAY B] or
[ENTER\OK].
An image will be played back from the selected track and
go to the next one in turn.
3 Press [STOP C] to stop playback.
Note
After a track is displayed for 5 seconds or 10 seconds (set in
the “Slide Show” on page 52), the display moves to the next
file.
During JPEG or Kodak Picture CD playback, press [1] or [0]
to rotate a picture 90 degrees clockwise or counterclockwise
respectively.
(Not available when the display menu appears.)
The subtitle created by the user can be displayed during
DivX
®
playback.
1 After the DivX
®
file is selected, “Subtitle List”
will appear.
2 Select the desired extension of the subtitle file
you want to display using [K \ L], then press
[ENTER\OK]. DivX
®
with the subtitle starts
playback. The subtitle cannot be displayed
when the setting is “OFF”.
If there is more than one extension, the extension
selection will appear in “Subtitle List”.
Note
“DivX Subtitle” must be activated in the DivX
®
menu. (Refer
to “B DivX Subtitle (Default: OFF)” on page 68.)
Playback file and the subtitle file must have the same name.
Playback file and the subtitle file must locate in the same
folder.
Only the subtitle files with the following extensions are
supported; .smi (.SMI), .srt (.SRT), .sub (.SUB), .ass (.ASS),
.ssa (.SSA), .txt (.TXT). (.sub (.SUB) and .txt (.TXT) files
may not be recognised.)
The subtitles that exceed the playback time of the DivX
®
file
will not be displayed.
Kodak Picture CD
front of this unit
DISC
USB
Title List
Video Files
Music
Photo
Picture CD
1 / 2
4 5 6
1 2 3
Image 1
DivX
®
Subtitle
E9TF0ED_EN.book Page 44 Wednesday, March 17, 2010 1:32 PM
45
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
This unit allows you to play back the files purchased or rented
from DivX
®
Video-On-Demand (VOD) services. The files are
available on the Internet. When you purchase or rent
DivX
®
VOD files on the Internet, you will be asked to enter a
registration code and a deactivation code. This menu items
provide you with the both codes.
1 Press [SETUP].
2 Select “General Setting” using [K \ L], then
press [ENTER\OK].
3 Select “DivX” using [K \ L], then press
[ENTER\OK].
4 Select “DivX® VOD” using [K \ L], then press
[ENTER\OK].
DivX® VOD selection screen will appear.
5 Select “Registration Code” or “Deactivation
Code” using [K \ L], then press [ENTER\OK].
Your registration code or deactivation code will appear.
e.g.) Registration Code
To deactivate this unit:
You can register 6 devices (1PC and 5 devices) for an
account of DivX
®
. If you want to use more than 6 devices,
you must deactivate unnecessary one. If you want to
deactivate this unit, please follow the steps below.
At step
5, select “Deactivation” using [K \ L], then press
[ENTER\OK]. Confirmation screen will appear. Select
“Yes” using [K \ L], then press [ENTER\OK].
This unit is deactivated.
You can get the new registration code and deactivation
code.
You will be asked to enter the new codes when you
download a DivX
®
VOD file next time.
Note
You must first download the file from the Internet and play it
back on this unit before you are able to get another code.
Once you play back the DivX
®
VOD file, you will not be able
to select “Registration Code” and “Deactivation Code”
unless you deactivate the unit.
You must follow this step every time you purchase or rent a
DivX
®
VOD file from the Internet for a deactivated unit.
It is recommended that files to be played back in this unit
are recorded under the following specifications:
[DivX
®
]
Official DivX
®
Certified product
Hint for the purchased or rental official DivX
®
Certified
product
When you purchased or rental a DivX
®
file through the
official site of DivX
®
video which is called DivX
®
Video-On-
Demand (VOD) services, a registration code is required
every time you get the new file from the DivX
®
VOD services.
Refer to “DivX
®
VOD” on page 45.
Some DivX
®
VOD files are restricted with the limited
playable times (you cannot play them back beyond the limit).
If your DivX
®
VOD file has such limit, the playback
confirmation screen will appear.
Use [0 \ 1] to select “Yes” if you want to play back the file, or
to select “No” if you do not want to play it back. Then press
[ENTER\OK] to confirm the selection.
You cannot play back the DivX
®
VOD files of which rental
period has been expired. In such case, press [TOP MENU]
and select other files that can be played back.
Note for DivX
®
•DivX
®
is a codec (compression/decompression) that can
compress images to a very small amount of data. The
software can compress video data from almost any sources
to the size that can be sent on the Internet without
compromising visual quality of the images.
For discs, a file with an extension of “.avi” and “.divx” can be
played back as a DivX
®
file.
Files whose extension other than “.avi” and “.divx” will not be
listed on the DivX
®
menu. However, unplayable groups or
tracks may be displayed, depending on the recording
conditions.
Even if the file has an extension of either “.avi” and “.divx”,
this unit cannot play it back if it is recorded in the format
other than DivX
®
.
Folders are known as Groups; files are known as tracks.
A symbol of is shown on the top of the file name.
A maximum of 255 folders or 999 files may be recognised in
one disc.
Up to 8 hierarchies can be recognised in one folder. Files in
the 9th or deeper hierarchies cannot be played back.
If the track extends beyond the scope of screen, a down
arrow “ ” appears, indicating that the user can view
another part on the next page. The current page number
and the number of total pages are shown on the right of the
down arrow “ ”.
Letters of a file / folder name overflowing the given space will
be displayed as “...”.
DivX
®
VOD
DivX
DivX
®
DivX
®
DivX® VOD
DivX Subtitle
DivX® VOD
Registration Code
Deactivation Code
Deactivation
Your registration code is:
DivX®VOD
To learn more visit
www.divx.com/vod
Playable Codec of AVI files : DivX
®
3.x, DivX
®
4.x,
DivX
®
5.x, DivX
®
6.x
Maximum size of image : 720 x 480 @30 fps
720 x 576 @25 fps
Sampling frequency of audio : 16 kHz - 48 kHz
Audio type : MPEG1 audio layer 3 (MP3),
MPEG1 audio layer 2,
Dolby Digital
Rental Expired
This rental is expired.
Please push ‘TOP MENU’.
E9TF0ED_EN.book Page 45 Wednesday, March 17, 2010 1:32 PM
46
EN
You can play back the disc recorded in multi-session.
It may take awhile for audio and images to be output after
you inserted a disc and pressed [PLAY B].
When playing back the files recorded in high bit rates, the
images can be interrupted in some occasions.
Although DivX
®
logo has been obtained for this unit, it may
not be able to play back some data, depending on the
characteristics, bit rates, or audio format settings, etc.
Use the software recognised by the DivX, Inc. when you
make DivX
®
files.
•A DivX
®
file whose file size exceeds 2 GB cannot be played
back.
If you try to play back the DivX
®
file that has the screen
resolution, audio format and frame rate (over 30 fps) which
this unit does not support, an error message will appear.
If a large-sized DivX
®
file is selected, it may take awhile to
start the playback (over 20 seconds sometimes).
If DivX
®
files written on CD discs cannot be played back,
rewrite them on a DVD disc and try to play back.
For more information for DivX
®
, please visit
http://www.divx.com
.
You cannot play back the DivX
®
VOD files obtained with
different registration codes on this unit. Press [TOP MENU]
and select other files that can be played back.
This unit does not support the DivX
®
file with UDF format.
A DVD contains a disc menu, which lists the contents and
enables you to customise playback. The menu may offer
choices for subtitle languages, special features, and chapter
selection. Usually this information appears automatically
when you start playback, but sometimes you need to press
[MENU\LIST] to display the menu.
Press [DVD] first.
1 Press [MENU\LIST].
If the feature is not available, “ may appear on the TV
screen. The displayed disc menu, which will vary among
discs, and may be same with the Title menu.
2 Select an item using [K \ L \ 0 \ 1], then press
[ENTER\OK].
Repeat this step until all the features you want are set up
or to start playing back the disc from the menu. The
following operation is available.
[the Number buttons]:
Selects a numbered menu option (available on certain discs).
3 Press [MENU\LIST] to exit the disc menu.
Note
Menus vary among discs. Refer to the information
accompanying the disc for details.
Some DVDs have a Title menu, which lists the titles available
on the DVD. You can start playing back such discs at a
specific title.
On this unit, if you finalise video mode disc, a Title Menu will
be created automatically.
Press [DVD] first.
1 Press [TOP MENU].
The Title Menu will appear.
For some discs, the Title Menu appears automatically.
If the feature is not available, “ ” may appear on the TV
screen.
2 Select a desired item using [K \ L \ 0 \ 1], then
press [ENTER\OK].
The disc will start playing back at the title you selected.
The following operations are available.
[TOP MENU] button:
Displays the DVD “Title Menu” which will vary between discs.
[K \ L \ 0 \ 1] buttons:
Move the cursor from item to item on the screen.
[ENTER\OK] button:
Selects the currently highlighted menu option.
[the Number buttons]:
Selects a numbered menu option (available on certain
discs).
3 Press [TOP MENU] to exit.
Note
[TOP MENU] will not be available for some DVDs.
Menus vary among discs. Refer to the information
accompanying the disc for details.
Playing Back Discs Using the Disc Menu
Authorization Error
This player is not authorized to play
this video.
Please push ‘TOP MENU’.
DVD-V
DVD-V
DVD-V
Playing Back a Disc Using the Title
Menu
DVD-V
DVD-V
DVD-V
DVD-RW
DVD-RW
DVD-RW
Video
DVD-R
DVD-R
DVD-R
E9TF0ED_EN.book Page 46 Wednesday, March 17, 2010 1:32 PM
47
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
Special Playback
You can resume playback from the point where you stopped it
before.
1 During playback, press [STOP C].
The resume message will appear.
2 Press [PLAY B].
In a few seconds, playback will resume from the point at
which you stopped it before. Even if you turn off the unit,
you can resume playback at the same point after turning
back on the unit.
To cancel the resume playback and start playing back the
disc from the beginning:
Press [STOP C] while playback is stopped.
Note
For MP3 and JPEG files, playback will resume from the
beginning of the track at which playback was stopped.
1 During playback, press [FWD D] or [REV E].
Each time you press [FWD D] or [REV E], the
approximate speed will change as follows.
Fast forward or fast reverse playback across titles (for
DVDs) or tracks / files (for MP3 / DivX
®
) is not possible.
For audio CDs and MP3 files approximate speed is fixed
at 8x with sound.
•For DivX
®
files, approximate forward speeds are 2x, 20x
and 40x, and approximate reverse speeds are 5x, 20x
and 40x.
To return to playback at normal speed, press [PLAY B].
Picture quality of DivX
®
files in fast reverse is lower than
that in fast forward.
•For some DivX
®
files, Fast forward/Fast reverse may not
function.
Note
Forward / reverse speeds are indicated with icons as follows.
Forward (Approx. Speed):
2x:
20x:
40x:
Reverse (Approx. Speed):
5x:
20x:
40x:
To enjoy recorded programmes without any interruptions,
press [CM SKIP].
1 During playback, press [CM SKIP].
Normal playback will start 30-second advanced point from
the point at which you press [CM SKIP].
Each time you press [CM SKIP], the start point will move
another 30 seconds forward and playback resume
automatically.
You can press [CM SKIP] up to 6 times (180 seconds).
1 During playback, press [PAUSE F].
Playback will pause with the sound muted.
2 Press [PLAY B] to resume playback.
Rapid Playback function is available only during
playback.
Available only on discs recorded in the Dolby Digital format,
Rapid Playback plays back in a slightly faster/slower speed
while keeping the sound output.
1 During playback, press [1.3x\0.8x PLAY].
2 Press [PLAY B] to return to the normal
playback.
Note
Audio (language) setting cannot be changed while using this
mode.
This feature may not work at some point in a disc.
Audio is PCM during Rapid Playback mode.
When you select “PAL” in “TV System” (see page 66), this
function is not available with discs recorded using the NTSC
system.
Resume Playback
Fast Forward / Fast Reverse
DVD-V
DVD-V
DVD-V DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
CD
CD
CD
MP3
MP3
MP3
JPEG
JPEG
JPEG
DivX
DivX
®
DivX
®
DVD-V
DVD-V
DVD-V DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
CD
CD
CD
MP3
MP3
MP3
DivX
DivX
®
DivX
®
REV
FWD
REV
FWD
REV
FWD
REV
FWD
REV
FWD
REV
FWD
20x 2x 20x5x 40x40x
Normal
speed
playback
Skipping TV Commercials during
Playback
Pause
Rapid Playback
B :Press [1.3x\0.8x PLAY] once during playback.
Plays back approximately at 0.8 times of normal
playback.
B :Press [1.3x\0.8x PLAY] twice during playback.
Plays back approximately at 1.3 times of normal
playback.
B :Press [1.3x\0.8x PLAY] thrice to play back in
normal speed.
No effects.
DVD-V
DVD-V
DVD-V DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
DVD-V
DVD-V
DVD-V DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
CD
CD
CD
MP3
MP3
MP3
JPEG
JPEG
JPEG
DivX
DivX
®
DivX
®
DVD-V
DVD-V
DVD-V DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
x0.8
x1.3
E9TF0ED_EN.book Page 47 Wednesday, March 17, 2010 1:32 PM
48
EN
1 During playback, press [PAUSE F].
2 Press [SKIP H \ G] repeatedly.
Each time you press [SKIP G], playback will go forward
one frame (or step) at a time with the sound muted.
To go backward one frame (or step), press [SKIP H].
Press and hold [SKIP G] to continue going forward.
To continue going backward, press and hold [SKIP H].
3 Press [PLAY B] to resume playback.
Note
Only step by step forward is available when playing back
media with DivX
®
files.
1 During playback, press [PAUSE F], then press
[FWD D] or [REV E].
Each time you press [FWD D] or [REV E], the
approximate speed changes as follows.
(The sound will remain muted.)
To return to normal playback, press [PLAY B].
Note
Forward / reverse speeds are indicated with icons as follows.
Forward (Approx. Speed):
1/16x:
1/8x:
1/3x:
Reverse (Approx. Speed):
1/16x:
1/8x:
1/4x:
•For some DivX
®
files, Slow forward may not function.
Only slow forward is available when playing back media with
DivX
®
files.
1 During playback, press [DISPLAY] to bring up
the display menu.
2 Select the icon using [0 \ 1] to display the
selection menu.
Four options are available, “x1.0”, “x1.2”, “x1.5” and
“x2.0”. These are displayed excluding the current zoom
rate.
3 Select the desired zoom factor to zoom using
[K \ L], then press [ENTER\OK].
The zoom area is displayed.
4 Select the desired zoom position using
[K \ L \ 0 \ 1], then press [ENTER\OK].
Zoom playback will start.
Note
To cancel the zoom function, select “x1.0” using [K \ L],
then press [ENTER\OK].
If selecting a smaller factor than that currently selected, the
zoom area is not displayed.
You cannot slide the zoomed picture on some JPEG files.
You can assign a specific point on a disc to return later.
1 During playback, press [DISPLAY] to bring up
the display menu.
If the display menu is already shown, skip to step 2.
2 Select the icon using [0 \ 1] to display the
marker list.
e.g.) DVD-video
3 Select the desired marker number using [K \ L].
When the disc reaches the desired point, press
[ENTER\OK].
The title (track) number and the time are displayed.
4 To return to the marker, select the desired
marker number using [K \ L], then press
[ENTER\OK].
Note
To clear a marker, select the marker number you want to
clear, then press [CLEAR].
You can mark up to 6 points.
All markers are erased when you perform the following
operations.
- Opening the disc tray
- Turning off the power
- Making additional recording on the disc (DVD only)
- Editing any title (DVD only)
- Changing the mode between Original and Playlist. (VR
mode DVD-RW disc only)
Step by Step Playback
Slow Forward / Slow Reverse Playback
Zoom
DVD-V
DVD-V
DVD-V DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
DivX
DivX
®
DivX
®
DVD-V
DVD-V
DVD-V DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
DivX
DivX
®
DivX
®
REV
FWD
REV
FWD
REV
FWD
REV
FWD
REV
FWD
REV
FWD
1
/8x
1
/
1
6x
1
/8x
1
/
1
6x
1
/3x
1
/4x
Pause
DVD-V
DVD-V
DVD-V DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
JPEG
JPEG
JPEG
DivX
DivX
®
DivX
®
1/ 5 1/ 5
DVD
0:01:00 / 1:23:45
Video
T C
× 1.2
× 1.5
× 2.0
Marker Setup
DVD-V
DVD-V
DVD-V DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R CD
CD
CD
1/ 5 1/ 5
DVD
---
---
---
---
---
---
1
2
3
4
5
6
0:01:00 / 1:23:45
Video
T C
E9TF0ED_EN.book Page 48 Wednesday, March 17, 2010 1:32 PM
49
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
You can play back a title being recorded from the beginning
while recording continues. This function works from 1 minute
after the start of the recording. Make sure to use a DVD-RW
disc in VR mode, and the recording speed is set to 4H, 6H or
8H.
1 During recording, press [PLAY B].
Playback of the title you are recording will start from the
beginning.
If you play the fast forward playback and the playback
reaches the scene recorded 1 minute before, the
forwarding playback will automatically return to the normal
playback.
2 To stop the playback, press [STOP C] once.
The resume message will appear.
To stop recording, press [STOP C] again.
To cancel the resume, press [STOP C] again.
Using the [TIME SHIFT] button
With [TIME SHIFT], even if you leave your couch while you
are watching TV through this unit, you can come back and
watch the rest of the programme right from where you left at
any the convenient time with just one button. Please make
sure to put VR mode DVD-RW disc, and set the recording
speed to 4H, 6H or 8H.
1 While viewing a TV broadcast via this unit,
press [TIME SHIFT].
This unit start to record the TV broadcast.
2 Press [TIME SHIFT] again.
Playback will start from where you first press
[TIME SHIFT] while recording continues.
While viewing the recorded content, you can pause and
resume the playback by pressing [TIME SHIFT].
3 To stop the recording, press [STOP C] twice.
Note
Playback image may freeze momentarily using this function.
However this does not affect the recording.
The 2x fast forward playback is not available.
[REC] is not available during this function.
You must cancel this function first by pressing [STOP C]
once. Then you can use [REC] to use OTR (one-touch timer
recording) function or change recording time for the OTR.
“Wait for a moment.” will be displayed on the screen if you
press [PLAY B] before 1 minute of recording.
This function is available only when you are recording
on a DVD-RW disc in VR mode, with the recording speed
4H, 6H or 8H.
Use DVD-RW disc capable of 2x or 4x speed recording.
You can also play back a recorded title during current
recording or the Timer Recording on the same disc.
1 During recording, press [DISPLAY].
2 Select icon using [0 \ 1], then press
[ENTER\OK].
The title number next to will be highlighted.
Title:
Enter a desired title number to search using [K \ L] or
[the Number buttons], then press [ENTER\OK].
Selected title playback will start.
Chapter:
To move to for chapter, press [1].
Enter a desired chapter number to search using [K \ L] or
[the Number buttons], then press [ENTER\OK].
Selected chapter playback will start.
If you play the currently recording programme and the
playback reaches the scene recorded 1 minute before, the
forwarding playback will automatically return to the normal
playback.
3 Press [STOP C] once to stop playback.
The resume message will appear.
To stop recording, press [STOP C] again.
To cancel the resume, press [STOP C] again.
Note
Playback image may freeze momentarily using this function.
However this does not affect the recording.
The 2x fast forward playback is not available.
This function is available only when you are recording
on a DVD-RW disc in VR mode, with the recording speed
4H, 6H or 8H.
Only the titles (chapters) in the Original can be selected. You
cannot select titles from the title list.
When you stop the playback after the Timer recording is
completed, the unit will be switched to the timer-standby
mode if another programme has been set (refer to “Notes for
the Timer Recording” on page 35).
Use DVD-RW disc capable of 2x or 4x speed recording.
Chasing Playback during Recording
DVD-RW
DVD-RW
DVD-RW
VR
Simultaneous Playback and Recording
DVD-RW
DVD-RW
DVD-RW
VR
1/ 5 1/ 5 0:01:00 / 1:23:45
-
RW VR ORG
1 TF1
T C
1/ 5 1/ 5 0:01:00 / 1:23:45
4H 1:01 Resume ON
-
RW VR ORG
1 TF1
T C
E9TF0ED_EN.book Page 49 Wednesday, March 17, 2010 1:32 PM
50
EN
Search
Using [SKIP H \ G] buttons
1 During playback, press [SKIP G] to skip the
current title or chapter and move to the next.
The unit moves to the next title or chapter one after
another.
To go back to the previous title or chapter, press
[SKIP H] twice in quick successions.
Using the [DISPLAY] button
1 During playback, press [DISPLAY] to bring up
the display menu.
2 Select the icon using [0 \ 1], then press
[ENTER\OK].
for the title number is highlighted.
3 Enter the desired title number to search for
using [K \ L] or [the Number buttons], then
press [ENTER\OK].
Title search will start.
Note
Total number of chapters and playback time of the selected
title are also displayed.
3 Press [0 \ 1] to highlight the number displayed
in the right side of the icon.
4 Enter the desired chapter number to search for
using [K \ L] or [the Number buttons], then
press [ENTER\OK].
Chapter search will start.
Note
The title number and playback time of the selected chapter
are also displayed.
Using [SKIP H \ G] buttons
1 During playback, press [SKIP G] to skip the
current track and move to the next.
The unit moves to the next track one after another.
To go back to the previous track, press [SKIP H] twice
in quick successions. The unit moves backward one track
at a time.
Using the [DISPLAY] button
1 During playback, press [DISPLAY] to bring up
the display menu.
If the display menu is already shown, skip to step 2.
2 Select the icon using [0 \ 1], then press
[ENTER\OK].
for the track number is highlighted.
3 Enter the desired track number to search for
using [K \ L] or [the Number buttons], then
press [ENTER\OK].
Track search will start.
Note
During Random playback or Programme playback, you
cannot search the desired track.
You can search the desired track directly.
Using [the Number buttons]
1 During playback, if the display menu is not
displayed, press [the Number buttons] to enter
the desired track number.
Note
During Random playback or Programme playback, you
cannot search the desired track directly.
1 During playback, press [DISPLAY] to bring up
the display menu.
If the display menu is already shown, skip to step 2.
2 Select the icon using [0 \ 1], then press
[ENTER\OK].
for the title or track number is highlighted.
3 Press [0 \ 1] to highlight .
4 Enter the desired time to search for using
[K \ L] or [the Number buttons], then press
[ENTER\OK].
Time search will start.
Note
During Random playback or Programme playback, you
cannot search the desired time.
The title number and chapter number of the setting time are
also displayed.
Time search function is available only in the same track or
title.
Title / Chapter Search
Title Search
Chapter Search
Track Search
DVD-V
DVD-V
DVD-V DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
CD
CD
CD
MP3
MP3
MP3
JPEG
JPEG
JPEG
DivX
DivX
®
DivX
®
Direct Search
Time Search
CD
CD
CD
DVD-V
DVD-V
DVD-V DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R CD
CD
CD
DivX
DivX
®
DivX
®
E9TF0ED_EN.book Page 50 Wednesday, March 17, 2010 1:32 PM
51
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
Repeat / Random / Programme
Playback / Slide Show
1 During playback, press [DISPLAY] to bring up
the display menu.
If the display menu is already shown, skip to step 2.
2 Select the icon using [0 \ 1] to display the
selection menu.
3 Select the desired option to repeat using
[K \ L], then press [ENTER\OK].
The selected repeat playback will start.
The following operations are available.
Title:
The current title will be played back repeatedly.
(DVD only)
Chapter:
The current chapter will be played back repeatedly.
(DVD only)
All:
The current disc will be played back repeatedly.
(DVD-RW (VR mode), audio CD, MP3, JPEG and DivX
®
only)
A-B:
The A-B point will be played back repeatedly.
(DVD, audio CD and DivX
®
only)
When pressing [ENTER\OK] while A-B is highlighted,
A-B repeat is set.
•Press [ENTER\OK] again to decide the starting point
(A).
•Press [ENTER\OK] after setting point (A) to select the
ending point (B).
Track:
The current track will be played back repeatedly.
(audio CD, MP3, JPEG and DivX
®
only)
Group:
The current group will be played back repeatedly.
(MP3, JPEG and DivX
®
only)
Note
To cancel the repeat playback, select “OFF” at step 3. The
repeat setting is also cancelled when you stop playback.
Point B for the repeat A-B playback should be set within the
same title or track as point B.
You cannot select “Group” during the random playback of
MP3 and JPEG files.
Chapter / Track repeat will be cancelled whenever a Chapter
/ Track is skipped forward or backward.
For some DivX
®
files, A-B Repeat playback may not function.
You can use this function to play back a disc randomly instead
of in the recorded order.
1 In stop mode, press [SETUP].
2 Select “DISC Playback Mode” or “USB Playback
Mode” using [K \ L], then press [ENTER\OK].
“DISC Playback Mode” or “USB Playback Mode” menu
will appear.
Select “Random Play” using [K \ L], then press
[ENTER\OK].
Select “Music” using [K \ L], then press
[ENTER\OK] twice.
Select “Photo” using [K \ L], then press
[ENTER\OK], and select “Random Play” using
[K \ L], then press [ENTER\OK].
Random playback will start.
Note
To cancel random playback, press [STOP C] twice during
random playback. “OFF” appears on the screen.
During random playback, if you forward the track to the end,
the playback speed of the next track will be normal.
During random playback, you cannot use the search
function except for the search with [SKIP H \ G]. By
pressing [SKIP H], you can return only to the beginning of
the current track.
You can programme the disc to play back in your desired
order.
1 Follow steps 1 to 2 in “Random Playback” on
page 51.
2 Select “Programme Play” using [K \ L], then
press [ENTER\OK].
3 Select the desired track using [K \ L], then
press [ENTER\OK] or [1].
4 Press [PLAY B] to start programme playback.
Repeat Playback
DVD-V
DVD-V
DVD-V DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R CD
CD
CD
MP3
MP3
MP3
JPEG
JPEG
JPEG
DivX
DivX
®
DivX
®
Random Playback
3 Audio CD:
MP3 files:
JPEG files:
Programme Playback
CD
CD
CD
MP3
MP3
MP3
JPEG
JPEG
JPEG
CD
CD
CD
0:00:00
-- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
--
DISC Playback Mode
Programme Play
Total
E9TF0ED_EN.book Page 51 Wednesday, March 17, 2010 1:32 PM
52
EN
Note
To erase tracks you selected, press [CLEAR].
You can make up to 50 track settings.
To cancel programme playback, press [STOP C] twice
during programme playback. “OFF” appears on the screen.
You may also select the desired track using
[the Number buttons] at step
3.
During programme playback, if you forward the track to the
end, the playback speed of the next track will be normal.
During programme playback, you cannot use the search
function except for the search with [SKIP H \ G].
You can select the display time between 5 seconds and 10
seconds.
1 Follow steps 1 to 2 in “Random Playback” on
page 51.
2 Select “Photo” using [K \ L], then press
[ENTER\OK].
3 Select “Slide Show” using [K \ L], then press
[ENTER\OK].
4 Select the display time using [K \ L], then press
[ENTER\OK].
5 Press [SETUP] to exit.
Note
Large-size JPEG files take a few moments to be displayed.
Selecting the Format of Audio and
Video
You can select the format of audio and video to suit the
content of the disc you are playing back.
Many DVD-videos have subtitles in one or more languages.
The available languages are usually printed on the disc case.
You can switch subtitle languages at any time during
playback.
1 During playback, press [DISPLAY] to bring up
the display menu.
Or press [SUBTITLE] during playback and follow from
step
3.
2 Select the icon using [0 \ 1] to display the
selection menu.
3 Select the desired subtitle language using
[K \ L], then press [ENTER\OK].
Subtitles are displayed in the selected language.
If you select “OFF”, subtitles will disappear.
Note
With some discs it is only possible to change the subtitle
language from the disc menu. Press [TOP MENU] or
[MENU\LIST] to display the disc menu.
If a 4-digit language code appears in the subtitle menu at
step
3, refer to the “Language Code” on page 78.
For media with DivX
®
files, the screen only displays the
number of subtitle languages.
When playing back a DVD-videos recorded with two or more
soundtracks (often in different languages), you can switch
among them during playback.
When playing back the titles in VR mode DVD-RW discs
recorded with bilingual audio, you can switch to main audio
(L), sub audio (R) or a combination of both (L / R).
When playing back audio CDs, you can switch among the left,
the right channel and stereo.
1 During playback, press [DISPLAY] to bring up
the display menu.
If the display menu is already shown, skip to step 2.
Or press [AUDIO] during playback and follow from step
3.
2 Select the icon using [0 \ 1] to display the
selection menu.
Slide Show
JPEG
JPEG
JPEG
Switching Subtitles
Switching Audio Soundtrack
DVD-V
DVD-V
DVD-V DVD-RW
DVD-RW
DVD-RW
VR
DivX
DivX
®
DivX
®
DVD-V
DVD-V
DVD-V DVD-RW
DVD-RW
DVD-RW
VR
CD
CD
CD
DivX
DivX
®
DivX
®
E9TF0ED_EN.book Page 52 Wednesday, March 17, 2010 1:32 PM
53
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
3 Select a desired audio soundtrack or audio
channel using [K \ L], then press [ENTER\OK].
With a DVD-video, VR mode DVD-RW, or DivX
®
files:
Audio soundtrack will switch.
Example:
English J Spanish J French
If the title contains both main and sub audio, you can
further select L (main), R (sub), L/R (mixed of main and
sub).
With an audio CD:
The Audio channel will switch.
Example:
L/R J L J R
Note
For some discs, it is only possible to change the soundtrack
from the disc menu. Press [TOP MENU] or [MENU\LIST] to
display the disc menu.
When outputting the audio signal from the DIGITAL AUDIO
OUT (COAXIAL) or when connected to the Dolby Digital
Stream compatible TV with an HDMI cable, you cannot
switch to the main audio (L) or sub audio (R) when playing
back a title in VR mode DVD-RW with “Dolby Digital” set to
“Stream”. If you want to switch the audio, set “Stream” to
“PCM”. (See page 65.)
You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
1 During playback, press [DISPLAY] to bring up
the display menu.
If the display menu is already shown, skip to step 2.
2 Select the icon using [0 \ 1] to display the
selection menu.
Virtual Surround menu will appear.
3 Select “OFF”, “Type 1” or “Type 2” using
[K \ L], then press [ENTER\OK].
e.g.) DVD-video
Note
Select Virtual Surround to “OFF” in case the sound is
distorted.
The setting will be kept “OFF” when the unit is turned off.
Some DVD-videos feature scenes shot from two or more
angles. The disc case is usually marked with an angle icon if
the disc has multi-angle scenes.
1 During playback, press [DISPLAY] to bring up
the display menu.
The angle icon appears when a switching camera angle is
available. (Available only when the angle icon appears in
bottom right on the TV screen.)
2 Select the icon using [0 \ 1], then press
[ENTER\OK].
The angle will switch each time you press [ENTER\OK].
Note
If the Angle Icon setting is “OFF” in “Setup” menu, the
icon will appear only when the disc is played back and the
Display menu appears. (See page 66.)
Even when the icon is not displayed, you can select the
angle if the currently played back title has at least two multi-
angle scenes.
1 During playback, press [DISPLAY] to bring up
the display menu.
2 Select the icon using [0 \ 1] to display the
selection menu.
Noise Reduction menu will appear.
3 Select the desired option using [K \ L], then
press [ENTER\OK].
This function reduces noise in the playback picture. When
playing back discs recorded in long time modes such as 6H or
8H, select “Type 1” or “Type 2”.
“Type 2” is more effective.
When playing back discs with a little noise, such as DVD-
videos, select “OFF”.
Switching Virtual Surround System
OFF: No effect
Type 1: Natural effect
Type 2: Emphasised effect
DVD-V
DVD-V
DVD-V DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R CD
CD
CD
MP3
MP3
MP3
1/ 5 1/ 5
DVD
0:01:00 / 1:23:45
Video
T C
OFF
Type 1
Type 2
Switching Camera Angles
Reducing Block Noise
DVD-V
DVD-V
DVD-V
DVD-V
DVD-V
DVD-V DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
DivX
DivX
®
DivX
®
E9TF0ED_EN.book Page 53 Wednesday, March 17, 2010 1:32 PM
54
EN
Guide to a Title List
Title list allows you to check the titles recorded on the disc
easily. You can choose a title to play back from this list and
easily edit the titles as you prefer.
Press [DVD], then press [TOP MENU].
1 Title list: List of titles recorded on the disc. Each title
is indicated by its index picture. Index picture for the
selected title can be seen in motion. Following
icons may be displayed on the index picture.
The protect icon, which appears when the title has
been protected. (Original titles only)
3 Arrow: Indicating there is a previous / next page.
4 Title list icon, which indicates a type of the
displayed title list.
5 Title name.
6 Title information, which displays recorded time,
length of the title, date / month / year, recorded CH,
and the recording speed.
7 Submenu: Submenus for the selected menu are
displayed here.
8 Title name (editable): If you do not name the title,
the recorded date, time, channel, and the recording
speed are displayed here.
9 Progress bar: Indicating the progress of the
playback.
10 Preview window: Preview of the selected title is
displayed here.
11 Playback status: Indicating the current playback
status of the selected title.
Press [RETURN\BACK] to exit the title list.
Editing
1 / 2
12:00 (2:00:00) 17/ 05/ 10 1 6H
4 5 6
1 2 3
ORG
0:00:59
1
ORG
17/05/10 18:00 22 2H
Edit
Scene Delete
Edit Title Name
Chapter Mark
Protect
Title List
ABCDE
456
2 3 1 3
10 11 9 7 8
2 : Indicating the title is protected.
: VR (Original) mode
: VR (Playlist) mode
:Video mode
ORG
PL
Video
E9TF0ED_EN.book Page 54 Wednesday, March 17, 2010 1:32 PM
55
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
Editing Discs
You will find editing discs is easy. This unit offers convenient
edit functions.
You can edit the following from a title list.
Assigning a name to a title
Dividing a title
Combining titles
Adding titles to a Playlist
Setting or releasing the title protection
Adding or deleting chapter marks
Deleting titles or parts of titles
(Possible editing functions depend on the recording format
and editing method.)
Original and Playlist (VR mode)
For VR mode DVD-RW disc, you can edit the recordings in
Playlist without changing the original recordings. Playlist does
not take up much disc space.
What “Original” or “Playlist” is for?
There are 2 types for the title list: Original and Playlist
Original content refers to what’s actually recorded on the
VR mode DVD-RW disc.
Playlist content refers to the edited version of the VR mode
DVD-RW disc; how the Original content is to be played.
Finalising a Disc
This will allow a disc that is recorded on this unit to be played
back on a different DVD player — without finalisation it will
not be playable on another player.
After finalising a DVD-RW/-R disc, you cannot edit any
information that is on that disc.
Using these editing functions to modify copyrighted
content for any purpose other than your private viewing
may be prohibited under the Copyright Laws of the United
States and other countries, and may subject you to civil
and criminal liability.
Note
A Playlist is not available for DVD-R or video mode DVD-RW
discs.
It is not possible to edit a disc recorded in another video
system other than PAL, such as NTSC.
After finalising a DVD-RW/-R disc, you cannot edit any
information that is on that disc.
You can delete titles you do not want to keep.
When an Original is deleted from VR mode DVD-RW disc, the
recordable disc space will increase. Even when a Playlist is
deleted, the original of the Playlist will remains, and
recordable disc space will not increase.
Recordable disc space of video mode DVD-RW disc will
increase when the last title on the title list is deleted. However,
deleting the title will not change recordable disc space for
DVD-R disc.
In finalised DVD-R or video mode DVD-RW discs, you cannot
select the title list because it cannot be edited once finalised.
Note
It is not possible to retrieve deleted titles.
Press [DVD] first.
1 In stop mode, press [TOP MENU].
Title List will appear.
For VR mode DVD-RW disc, press [MENU\LIST] to
switch between “Original” and “Playlist”.
2 Select the desired title with [K \ L \ 0 \ 1], then
press [ENTER\OK].
Pop up window will appear.
3 Select “Title Delete” using [K \ L], then press
[ENTER\OK].
e.g.)VR mode DVD-RW Original
4 Select “Yes” using [K \ L], then press
[ENTER\OK].
Final confirmation message will appear. Select “Yes”
using [K \ L], and then press [ENTER\OK].
Title is deleted.
5 Press [STOP C] to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
Deleting Titles
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
Play From Start
Edit
Title Delete
Dubbing
Add To Playlist
Yes
No
Delete this title?
E9TF0ED_EN.book Page 55 Wednesday, March 17, 2010 1:32 PM
56
EN
You can edit the title names from this menu.
The title names you edit will appear on the title list.
Press [DVD] first.
1 In stop mode, press [TOP MENU].
Title List will appear.
For VR mode DVD-RW disc, press [MENU\LIST] to
switch between “Original” and “Playlist”.
2 Select the desired title with [K \ L \ 0 \ 1], then
press [ENTER\OK].
Pop up window will appear.
3 Select “Edit” with [K \ L], then press
[ENTER\OK].
Edit menu will appear.
4 Select “Edit Title Name” using [K \ L], then
press [ENTER\OK].
A window for entering the title name will appear.
5 To enter the title name, refer to “Guide to
Editing Title Names” on page 56.
When you finish entering the title name, press
[ENTER\OK].
6 Select “Yes” using [K \ L], then press
[ENTER\OK].
The name you edited becomes the title.
7 Press [RETURN\BACK] repeatedly to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
Characters set will be changed to the “@!?” automatically if
you press [1] after you selected the “ABC” or “abc” mode.
Note
To delete letters, press [CLEAR] repeatedly. Press and hold
[CLEAR] to delete all letters.
Press [0 \ 1] to move the cursor to the left or right.
You can enter up to 30 letters.
Unrecognisable characters will be replaced with asterisks
(*). If you delete them, adjoining characters may change to
asterisks (*) or other.
You can add chapter marks to a title. After a title is marked
with chapters, you can use the chapter search feature.
You can set a chapter mark anywhere you want.
Press [DVD] first.
1 Follow the steps 1 to 3 in “Editing Title Name”
on page 56.
2 Select “Chapter Mark” using [K \ L], then press
[ENTER\OK].
3 Use [SKIP H \ G], [REV E], [FWD D],
[PLAY B] and [PAUSE F] to find where you
want to create a new chapter mark.
Or, use [SKIP H \ G] to find a chapter mark
that you want to delete.
Editing Title Name
DVD-RW
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-R
A B C
a b c
1 2 3
@ ! ?
0:00:59
7/05/10 18:00 22 2H
1
ORG
1
Edit Edit Title Name
Guide to Editing Title Names
Step 1 : Select the desired character set using [K \ L], then
press [ENTER\OK].
Step 2 : Using the list below as a guide, press
[the Number buttons] repeatedly until the desired
letter appears.
Adding or Deleting Chapter Markers
Manually
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
! ” # $ % & ’ ( )
+ , - . / : ; < = >
? @ [ ] ^ _ { | }
2
3
4
5
6
7
8
9
0
1
ABC
abc @ ! ?
123
––
Press
Select
<space> <space> <space>
DVD-RW
DVD-RW
DVD-RW
VR
E9TF0ED_EN.book Page 56 Wednesday, March 17, 2010 1:32 PM
57
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
4 Select “Add” or “Delete” accordingly using
[K \ L], then press [ENTER\OK].
You cannot delete the first chapter of a title.
5 Select “Yes” using [K \ L], then press
[ENTER\OK].
Adding a chapter mark:
If you select “Add” at step
4, a new chapter mark is
created at the point you specified.
Deleting a chapter mark:
If you select “Delete” at step
4, the chapter mark you
selected is deleted.
6 Press [RETURN\BACK] repeatedly to exit.
For DVD, the data will be written onto the disc
momentarily.
This operation may take awhile to be completed.
Note
Maximum numbers of chapter for each media:
Besides the mentioned above, the number of chapters
may be different according to the recording time.
Only with regard to DVD editing, you may not be able to add
chapter marks depending on the duration of the title or the
number of chapters.
Only with regard to DVD editing, remaining time of the disc
may decrease when adding chapter marks or increase when
clearing chapter marks depending on the recording time or
edited contents.
For titles in video mode DVD-RW disc, you can set or edit
chapter at every selected time interval at once. You can also
clear all the chapter marks at once.
You can only specify the interval of chapter marks that last for
more than 5 minutes.
Press [DVD] first.
1 Follow the steps 1 to 3 in “Editing Title Name”
on page 56.
2 Select “Chapter Mark” using [K \ L], then press
[ENTER\OK].
3 Select the desired interval using [K \ L], then
press [ENTER\OK].
4 Select “Yes” using [K \ L], then press
[ENTER\OK].
Chapter marks are added.
If you select “OFF” at step
3, all the chapter marks are
erased.
5 Press [RETURN\BACK] repeatedly to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
Note
You cannot select the chapter mark the title of which is less
than 5 minutes.
You cannot select a chapter mark interval that exceeds the
length of a title.
The length of chapters may slightly deviate from the one
specified at the step
3.
A chapter mark may be delayed depending on the recording
content.
Maximum number of chapter for video mode DVD is 99
chapters per disc and title.
To prevent the accidental editing or erasing of the titles, you
can protect them in the Original menu.
Press [DVD] first.
1 Follow the steps 1 to 3 in “Editing Title Name”
on page 56.
2 Select “Protect” using [K \ L], then press
[ENTER\OK].
3 Press [ENTER\OK] again.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
If the title is already protected, “ON A OFF” will appear
instead. Press [ENTER\OK], to release the title from
protection.
The protected title will be marked with icon.
4 Press [RETURN\BACK] repeatedly to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
To protect a whole disc:
Select “Disc Protect OFF A ON” from “DVD Menu”, then
select “Yes”. Refer to “Setting a Disc to Protect” on
page 41.
You can divide a title into two new titles.
Press [DVD] first.
1 Follow steps 1 to 3 in “Editing Title Name” on
page 56.
2 Use [SKIP H \ G], [REV E], [FWD D],
[PLAY B] and [PAUSE F] to find where you
want to divide the title.
3 Select “Title Dividing” using [K \ L], then press
[ENTER\OK].
VR mode DVD : 999 chapters per entire Playlist and
Original
Adding or Deleting Chapter Marks at
once for Video Mode DVD-RW disc
DVD-RW
DVD-RW
DVD-RW
Video
Protecting Titles
Dividing a Title
DVD-RW
DVD-RW
DVD-RW
VR
Original
DVD-RW
DVD-RW
DVD-RW
VR
Playlist
E9TF0ED_EN.book Page 57 Wednesday, March 17, 2010 1:32 PM
58
EN
4 Select “Yes” using [K \ L], then press
[ENTER\OK].
The title is divided into two new titles with the same title
names.
5 Press [RETURN\BACK] to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
Note
You cannot divide a title of the disc when the number of
recording titles reaches the maximum of 99 (-RW), or the
number of recording chapters reaches the maximum of 999
(-RW).
You can combine two titles into a single title.
Press [DVD] first.
1 Follow steps 1 to 3 in “Editing Title Name” on
page 56.
2 Select “Title Combining” using [K \ L], then
press [ENTER\OK].
3 Select another title to combine using
[K \ L \ 0 \ 1], then press [ENTER\OK].
4 Select “Yes” using [K \ L], then press
[ENTER\OK].
The two titles will combine into a single title.
5 Press [RETURN\BACK] to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
Note
You cannot select the same title twice and combine it into a
single title.
If either one of the two original titles is deleted, the combined
new title is also deleted.
For VR mode DVD-RW disc, you can add a title to the Playlist
as you want.
Press [DVD] first.
1 Follow the steps 1 to 2 in “Deleting Titles” on
page 55.
2 Select “Add To Playlist” using [K \ L], then
press [ENTER\OK].
3 Select “Yes” using [K \ L], then press
[ENTER\OK].
The title is added to Playlist.
4 Press [RETURN\BACK] to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
Note
To delete a title from the Playlist, refer to “Deleting Titles” on
page 55.
When the number of the Playlist reaches its maximum (refer
to page 29), or when the number of the total chapter marks
of the Playlists reaches 999, “Add To Playlist” cannot be
selected.
All Playlists can be deleted if it is no longer needed.
1 Press [SETUP].
2 Select “DVD Menu” using [K \ L], then press
[ENTER\OK].
3 Select “Delete All Playlists” using [K \ L], then
press [ENTER\OK].
4 Select “Yes” using [K \ L], then press
[ENTER\OK].
“Are you sure?” will appear. Select “Yes” using [K \ L],
and then press [ENTER\OK].
Playlist is deleted.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
Note
Deleting a Playlist will not increase the available recording
time on the disc.
Combining Titles
DVD-RW
DVD-RW
DVD-RW
VR
Playlist
1 / 6
1
1 + 2
4 5 6
2 3
17/05/10 12:00 1 4H
12:00 (0:30:00)
17/05/10
1 4H
PL
Edit - Title Combining
Yes
Combine selected titles?
No
1 / 6
1
4 5 6
2 3
17/05/10 12:00 1 4H
12:00 (2:30:00)
17/05/10
1 4H
PL
Title List
Adding Titles to a Playlist
Deleting All Playlists
DVD-RW
DVD-RW
DVD-RW
VR
Ori
g
inal
Play From Start
Add To Playlist
Dubbing
Title Delete
Edit
DVD-RW
DVD-RW
DVD-RW
VR
Format
Finalise
Disc Protect OFF A ON
Delete All Playlists
Delete entire playlist?
Yes
No
E9TF0ED_EN.book Page 58 Wednesday, March 17, 2010 1:32 PM
59
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
You can delete a specific part of a title.
Even when a title is deleted from the Playlist, the original title
will remain as it is.
Press [DVD] first.
1 Follow the steps 1 to 3 in “Editing Title Name”
on page 56.
2 Select “Scene Delete” using [K \ L], then press
[ENTER\OK].
3 Use [SKIP H \ G], [REV E], [FWD D],
[PLAY B] and [PAUSE F] to find the start point,
then press [ENTER\OK].
Then use [SKIP H \ G], [REV E], [FWD D],
[PLAY B] and [PAUSE F] again to move to the
end point, and press [ENTER\OK].
The cursor will move to “Preview”.
The bar at the bottom of the screen indicates the total and
the elapsed time of the title, and the area selected for
deletion is indicated in red.
You can check the preview by pressing [ENTER\OK].
Before and after 5 seconds of the deleted point will be
playback for preview.
4 Select “Delete” using [K \ L], then press
[ENTER\OK].
5 Select “Yes” using [K \ L], then press
[ENTER\OK].
“Are you sure?” will appear. Select “Yes” using [K \ L],
and then press [ENTER\OK].
The part of the title is deleted.
6 Press [RETURN\BACK] repeatedly to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
Note
You cannot select “Scene Delete” if the number of chapter
marks in the Original or Playlist is 999. (Depends on the
content, there is a case that you cannot select “Scene
Delete” before the number of chapter marks reaches 999.)
The recordable disc space will not increase after deleting
parts of titles on a Playlist.
When a scene is deleted from an Original, the related title on
the Playlist will also be deleted automatically.
Deleting Parts of Titles
DVD-RW
DVD-RW
DVD-RW
VR
E9TF0ED_EN.book Page 59 Wednesday, March 17, 2010 1:32 PM
60
EN
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
Function Setup
Setup Items (highlight is the default) Contents
General Setting
Playback Parental Lock
E Page 64
level 1 to 8
Set the parental level for DVD disc playback.
Audio Out
E Pages 64-65
Dynamic
Range Control
OFF
Compressing the range of sound volume.
PCM
96kHz
Set whether the sound recorded in 96kHz will be down
sampled to 48kHz.
Dolby Digital
PCM Set whether to convert Dolby Digital into PCM or to output
Dolby Digital signals.
MPEG
Stream
Set whether to convert MPEG into PCM or to output
MPEG signals.
DTS
OFF
Set whether DTS signal is output or not.
MP3 Surround
Stream
Set the type of MP3 signal to output.
Disc Menu Language
E Page 65
Bulgarian
Czech
French
German
Hungarian
Italian
Polish
Romanian
Russian
Slovak
Spanish
Other
Set the language for Disc Menu.
Audio Language
E Page 65
English
Bulgarian
Czech
French
German
Hungarian
Italian
Polish
Romanian
Russian
Slovak
Spanish
Other
Set the language for audio.
Subtitle Language
E Page 65
English
Bulgarian
Czech
French
German
Hungarian
Italian
Polish
Romanian
Russian
Slovak
Spanish
Other
Set the language for subtitles.
Angle Icon
E Page 66
OFF
Set whether or not to display the angle icon.
Still Mode
E Page 66
Field
Frame
Set the type of still image in pausing playback.
TV System
E Page 66
Auto
Set the TV system.
OFF
ON
48kHz
Stream
PCM
ON
PCM
English
Original
OFF
ON
Auto
PA L
E9TF0ED_EN.book Page 60 Wednesday, March 17, 2010 1:32 PM
61
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
General Setting
Display OSD Language
E Page 66
İÝł˛×¹ð¦
Česky
Français
Deutsch
Magyar
Italiano
Polski
Romana
Ó³¹¹ð¦Ð
Slovenský
Español
Set the language for OSD (on-screen display).
Screen Saver
E Page 66
OFF
1 minute
5 minutes
15 minutes
Set the idling time before the screen saver starts.
FL Dimmer
E Page 66
Dark
Set the brightness of the front panel display.
Video TV Aspect
E Page 66
4:3 Letter Box
4:3 Pan & Scan
Set a picture size according to aspect ratio of your TV.
Video Out
E Page 67
Component (Progressive)
Component (Interlace)
Sets the video output mode.
Recording Auto Chapter
E Page 30
OFF
5 minutes
15 minutes
30 minutes
60 minutes
Insert chapter marks periodically.
Recording Audio Select (1H)
E Page 31
PCM Set the recording audio type. (Only when the recording
speed is set to “1H”.)
Auto Finalise
E Page 41
ON Set the unit to finalise the disc automatically.
Aspect Ratio (Video mode)
E Page 30
4:3
16:9
Set a aspect ratio for video mode recording.
Dubbing Mode
E Page 40
DVD A VCR
Set the dubbing selection.
Bilingual Recording Audio
E Page 31
Sub
Set the audio type for recording.
External Input Audio
E Page 31
Bilingual
Set the external input audio type for recording.
Video Colour System
E Page 37
PAL
SECAM
Set the video colour system to “PAL” or “SECAM”
automatically.
Set the video colour system to “PAL”.
Set the video colour system to “SECAM”.
Clock Clock Setting
E Page 67
Set the clock manually.
Auto Clock Setting
E Page 67
OFF
Set the clock automatically.
Channel Country
E Page 23
Spain - Peninsula
Spain - Canary Islands
Germany
Italy
Switzerland
Czech Republic
Other
Set the DVB channels to Channel Plan of each country.
Auto Tuning (DVB & ANALOG)
E Page 21
Tune the DVB and analogue channels automatically.
DVB Channel
Setup
Edit Channels
E Page 24
Lock the DVB channels, edit the favourite lists.
Auto Tuning
E Page 22
Tune the DVB channels automatically.
Manual Tuning
E Page 23
Tune the DVB channels manually.
Signal
Information
E Page 26
Display the detailed information of the current DVB
channel.
ANALOG
Channel Setup
Auto Tuning
E Page 21
Tune the analogue channels automatically.
Manual Tuning
E Page 21
Tune the analogue channels manually.
Move
E Page 22
Move the analogue channels to different position.
Setup Items (highlight is the default) Contents
English
10 minutes
Bright
16:9 Wide
SCART (RGB)
10 minutes
Dolby Digital
OFF
Auto
VCR A DVD
Main
Stereo
Auto
ON
France
E9TF0ED_EN.book Page 61 Wednesday, March 17, 2010 1:32 PM
62
EN
Note
Your change to each settings stays on even when the power is switched off.
An item which is not currently available is greyed in the settings.
General Setting
DivX DivX® VOD
E Pages 45, 68
This menu item provides you with the DivX
®
VOD
registration code. The DivX
®
registration code is required
when downloading the DivX
®
VOD files from the Internet.
To learn more about DivX
®
VOD, visit www.divx.com/vod.
Deactivation Code This menu item provides you with the DivX
®
VOD
deactivation code. The DivX
®
deactivation code is
required when re-downloading the DivX
®
VOD files from
the Internet after deactivating. To learn more about DivX
®
VOD, visit www.divx.com/vod.
Deactivation Yes This menu deactivates this unit and provides you with
new registration code and deactivation code in order to
download the DivX
®
VOD files from the Internet.
DivX Subtitle
E Pages 44, 68
English
Czech
Dutch
French
German
Hungarian
Italian
Polish
Romanian
Russian1
Russian2
Slovak
Spanish
Swedish
Set the language for DivX
®
Subtitle.
HDMI Format
E Page 68
YCbCr
Set the colour space for the HDMI output.
HDMI Audio
E Page 68
OFF
Set whether to output the HDMI audio signal or not.
RGB Range
E Page 68
Enhanced
Set the black-white contrast level for HDMI RGB output.
General Setting
DVB Setting Adult Lock
E Page 69
ON Set the Adult Lock and change Pincode.
Maturity Lock
E Page 69
Age 4 ~ Age 18
Lock each DVB programme.
Language
E Page 69
Audio
Czech
French
German
Italian
Spanish
Set the Audio language.
Subtitle
Czech
French
German
Italian
Spanish
Set the Subtitle language.
About
E Page 69
Check the current DVB system software version of the
unit.
Reset All
E Page 69
Set to the default setting.
Setup Items (highlight is the default) Contents
Registration Code
No
OFF
RGB
ON
Normal
OFF
OFF
English
English
E9TF0ED_EN.book Page 62 Wednesday, March 17, 2010 1:32 PM
63
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
General Setting
Common Procedures
1 In stop mode, press [SETUP].
2 Select “General Setting” using [K \ L], then
press [ENTER\OK].
3 Select a desired setup using [K \ L], then
press [ENTER\OK].
4 Select a desired item using [K \ L], then
press [ENTER\OK].
e.g.) Playback setup
5 Select a desired setting using [K \ L], then
press [ENTER\OK].
e.g.) Parental Lock item
Your setting is activated.
6 When you finish the setting, press [SETUP] to
exit.
To return to the previous screen
Press [RETURN\BACK].
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
DVB Setting
Reset All
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
DVB Setting
Reset All
General Setting
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
TV System
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
DVB Setting
Reset All
General Setting
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
TV System
Parental Lock
OFF
8
7
6
5
4
3
2
1
E9TF0ED_EN.book Page 63 Wednesday, March 17, 2010 1:32 PM
64
EN
Setup A General Setting A Playback
Set “Parental Lock” level.
Change “Parental Lock” level using [K \ L],
then press [ENTER\OK].
Proceed to either of the following steps.
Parental level
Note
“Parental Lock” function may not be available on some
discs.
It may be difficult to determine if some DVDs support the
parental lock function. Be sure to confirm that
“Parental Lock” function operates in the way that you
have set.
Record the password in case you forget it.
A password is not yet set
1
Select “Yes” using [K \ L], then press
[ENTER\OK].
2 Enter a new password using
[the Number buttons], then press
[ENTER\OK].
Your setting is activated.
If you select “No”, press [SETUP] to exit.
A password is already set
1
Enter the current password using
[the Number buttons].
2-A Select “No” using [K \ L], then press
[ENTER\OK].
“Parental Lock” level is activated.
2-B Select “Yes” using [K \ L], then press
[ENTER\OK].
Enter a new password using
[the Number buttons], then press
[ENTER\OK].
Your setting is activated.
(You can change both password and
“Parental Lock” level.)
Note
•Press [CLEAR] to erase numbers entered incorrectly.
If you forget your password or you want to clear all
settings in “Parental Lock”, enter [4], [7], [3], [7] using
[the Number buttons] at the option window. Your
password is cleared and parental levels are set to
“OFF”.
Choose the appropriate audio setting for your external
device.
It will only affect a disc playback.
Dynamic Range Control (Default: ON)
(DVD only)
Set to “ON” to make the dynamic range narrower.
“Dynamic Range Control” function is effective only with
analogue audio connection.
Note
“Dynamic Range Control” function is available only on
discs recorded in the Dolby Digital format.
Playback
A
Parental Lock (Default: OFF) (DVD only)
OFF : All parental locks are cancelled.
8 : DVD software of any grade (adult / general /
children) can be played back.
7 to 2 : Only DVD software intended for general use
and children can be played back.
1 : Only DVD software intended for children can be
played back.
A
B
C
D
E
F
G
H
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
TV System
8
7
6
5
4
3
2
1
Parental Lock
OFF
Change Password?
Yes
No
Password Input
B Audio Out
Password Input
Change Password?
Yes
No
Change Password?
Yes
No
Password Input
Audio Out
Dynamic Range Control
PCM
Dolby Digital
MPEG
DTS
MP3 Surround
Dynamic Range Control
ON
OFF
E9TF0ED_EN.book Page 64 Wednesday, March 17, 2010 1:32 PM
65
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
PCM sampling (Default: 48kHz)
Note
When playing back a disc with copyright protection:
Even if you select “96kHz”, the sound is down sampled
to 48 kHz.
Dolby Digital conversion (Default: Stream)
Note
When playing back a DVD-RW disc recorded in VR mode:
If the audio source on a disc is in Dolby Digital format,
set “Dolby Digital” to “PCM” so that you can switch to
main audio (L), sub audio (R), or a combination of both
(L / R) using your amplifier / decoder.
Settings for MPEG (Default: PCM) (DVD only)
Settings for DTS (Default: ON) (DVD only)
Settings for MP3 Surround (Default: PCM)
Note
Set to “Stream” when this unit is connected to an
amplifier for MP3 Surround.
Set “Disc Menu Language”.
Set “Audio Language”.
Note
If “Original” is selected, the audio language is the default
of the inserted disc.
“Audio Language” setting may not be available for some
discs.
Set “Subtitle Language”.
If “Other” is selected, enter the appropriate 4-
digit code using [the Number buttons].
Refer to “Language Code” on page 78.
When you finish entering the code, press
[ENTER\OK].
48kHz : If your amplifier / decoder is NOT compatible
with 96 kHz PCM, select “48kHz”. Sound
recorded at 96 kHz is down sampled to 48 kHz.
96kHz : If your amplifier / decoder is compatible with
96 kHz PCM, select “96kHz”. Sound is sampled
at 96 kHz.
PCM : Converts the Dolby Digital into PCM
(2 channel).
If your amplifier / decoder is NOT compatible
with Dolby Digital, set to “PCM”.
Stream : Outputs Dolby Digital signals.
If your amplifier / decoder is compatible with
Dolby Digital, set to “Stream”.
PCM : Converts MPEG into PCM.
If your amplifier / decoder is NOT compatible
with MPEG, set to “PCM”.
Stream : Outputs MPEG Audio signals.
If your amplifier / decoder is compatible with
MPEG, set to “Stream”.
ON : Outputs DTS signals.
If your amplifier / decoder is compatible with
DTS
®
, set to “ON”.
OFF : No DTS signal is output.
If your amplifier / decoder is NOT compatible with
DTS
®
, set to “OFF”.
PCM
48kHz
96kHz
Dol y Digital
PCM
Stream
b
MPEG
PCM
Stream
DTS
ON
OFF
PCM : Outputs all the MP3 files in stereo.
Stream : Outputs MP3 files in Stream.
C Disc Menu Language
(Default: English) (DVD only)
D Audio Language (Default: Original)
(DVD only)
E Subtitle Language (Default: OFF)
(DVD only)
MP3 Surround
PCM
Stream
Disc Menu Language
English
Bulgarian
Czech
French
German
Hungarian
Italian
Audio Language
Original
English
Bulgarian
Czech
French
German
Hungarian
Subtitle Language
OFF
English
Bulgarian
Czech
French
German
Hungarian
----
Code Input
E9TF0ED_EN.book Page 65 Wednesday, March 17, 2010 1:32 PM
66
EN
Note
You can also change or switch off the subtitles on a DVD
from the disc menu if it is available.
•Press [CLEAR] or [0] to erase numbers entered
incorrectly.
You can only select the languages supported by the
inserted disc.
Set to “ON” to show the angle icon during the playback.
Note
An individual picture on TV screen is called as Frame,
which consists of two separate images called as Field.
Some pictures may be blurred at the “Auto” setting in still
mode due to their data characteristics.
Note
With discs recorded using the PAL system, a PAL signal
is output for viewing on a PAL system TV.
Discs recorded with the PAL system cannot be viewed
on an NTSC system TV.
With discs recorded using the NTSC system, an NTSC
signal is output for viewing on an NTSC or Multi system
TV.
With discs recorded using the NTSC system, select PAL
to view on a PAL system TV.
Setup A General Setting A Display
Set the OSD language.
Set the screen saver time delay.
Set the front panel display brightness.
Note
The display will not light up when the unit is in standby
mode.
This is a Power Saving mode (ECO) for standby.
Setup A General Setting A Video
Use this feature to adjust the aspect ratio of the video
source which is different from your TV’s ratio to fit your TV
monitor without distorting the picture.
If you have a standard TV:
Select “4:3 Letter Box”, so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select “4:3 Pan & Scan” for a full
height picture with both sides trimmed when playing back
wide-screen picture.
If you have a widescreen TV:
Select “16:9 Wide”.
F Angle Icon (Default: ON) (DVD only)
G Still Mode (Default: Auto) (DVD only)
Auto : Automatically select the best resolution setting
(“Frame” or “Field”) based on the data
characteristics of the pictures.
Field : Select “Field” when the pictures are still
unstable even if “Auto” is selected. “Field”
stabilises the pictures, although the picture
quality may become coarse due to the limited
amount of data.
Frame : Select “Frame” to display relatively motionless
pictures in higher resolution. “Frame” improves
the picture quality, although it may unstabilise
the pictures due to simultaneous output of two
Field data.
H TV System (Default: PAL) (DVD only)
PAL : Outputs a modified PAL signal for viewing discs
recorded with the NTSC system on a PAL system
TV.
Auto : Changes the video system (PAL / NTSC)
automatically according to the format of the
inserted disc.
Angle Icon
ON
OFF
Still Mode
Auto
Field
Frame
TV System
PAL
Auto
Display
A OSD Language (Default: English)
B Screen Saver (Default: 10 minutes)
C FL Dimmer (Default: Bright)
Video
A TV Aspect (Default: 16:9 Wide)
A
B
C
OSD Language
Screen Saver
FL Dimmer
OSD Language
Áúëãàðñêè
English
Èesky
Français
Deutsch
Magyar
Screen Saver
OFF
1 minute
5 minutes
10 minutes
15 minutes
FL Dimmer
Bright
Dark
A
B
TV Aspect
Video Out
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
E9TF0ED_EN.book Page 66 Wednesday, March 17, 2010 1:32 PM
67
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
This unit is compatible with the Progressive Scan System.
The feature provides you with the higher definition images
than the traditional output system does. You can enjoy
Progressive Scan image by using HDMI OUT or
COMPONENT VIDEO OUT. To utilise the Progressive
Scan system through the COMPONENT VIDEO OUT, you
must set video output mode in “Setup” menu by following
the steps. “SCART (RGB)” is selected as the default.
When you set “Video Out” setting, you need a Scart
cable or an HDMI cable to output from this unit with
component video cable.
1 Select the desired setting using [K \ L], then
press [ENTER\OK].
If your TV is compatible with progressive scanning
(576p/480p), connect the TV to the COMPONENT
VIDEO OUT jacks of this unit and select “Component
(Progressive)” and set your TV to the progressive
scan mode.
If your TV is not compatible with progressive scan,
select “Component (Interlace)” for component
connection, or select “SCART (RGB)” for Scart cable
connection.
Refer to page 17 for more details.
Only if you select the “Component (Progressive)”,
proceed to step
2. If you select “Component (Interlace)”
or “SCART (RGB)”, your setting is activated.
2 Select “Yes” using [0 \ 1], then press
[ENTER\OK].
Final confirmation window will appear.
3 Select “Yes” using [K \ L], then press
[ENTER\OK] within 15 seconds.
Your setting is activated.
Note
When changing “Video Out” setting (“SCART (RGB)”,
“Component (Progressive)” or “Component (Interlace)”),
connect to the corresponding jack on the TV. If the
setting is changed, for example, to “SCART (RGB)”
while the COMPONENT VIDEO OUT jacks are used to
connect to the TV, a distorted video signal may be
output.
Setup A General Setting A Clock
1 Enter the date (day / month / year) using
[K \ L].
Press [1] to move the cursor to the next field. If you
want to go back to the previous field, press [0].
2 Enter the time (hours / minutes) using [K \ L],
then press [ENTER\OK].
The clock will start.
Although seconds are not displayed, they will be
counted from zero.
Note
Your clock setting will be lost if either there is a power
failure or the unit is unplugged for more than 30
seconds.
If “Auto Clock Setting” is set to “ON” when DVB channels
are memorised, you cannot select “Clock Setting”.
The clock is not displayed in standby mode because the
unit will return to a new Power Saving mode (ECO) with
the display off.
This unit receives time signals from the analogue / DVB
channels, and set the clock automatically. Set the channel
tuning before setting Auto Clock.
1 Select “ON” using [K \ L], then press
[ENTER\OK].
2 Press [SETUP] to exit.
3 Press [STANDBY-ON Q] to turn the unit off.
The Auto clock function is activated.
This unit will search for the time every time when the
power is turned off.
Leave the unit off for about 10 seconds to give it time
to set the clock.
B Video Out (Default: SCART (RGB))
Video Out
SCART (RGB)
Component (Progressive)
Component (Interlace)
Confirm again to use progressive scan.
If picture is good, select “Yes”.
No
Yes
Clock
A Clock Setting
B Auto Clock Setting (Default: ON)
A
B
Auto Clock Setting
Clock Setting
0 : 00
(FRI)
01 / 01 / 2010
Clock Setting
Auto Clock Setting
ON
OFF
E9TF0ED_EN.book Page 67 Wednesday, March 17, 2010 1:32 PM
68
EN
Note
If you want to cancel “Auto Clock Setting”, select “OFF”
using [K \ L], and then press [ENTER\OK] at step
1.
If “Auto Clock Setting” is “OFF”, “Timer Recording
(EPG)” may not be able to perform.
The clock may set itself automatically after you connect
the antenna cable to the unit and plug in the mains
cable. In this case, the current time will appear on the
front panel display.
If there are only analogue channels memorised in this
unit:
- The channel assigned to “analogue / 1Ch” must
receive the PDC signal in order to set the clock
automatically.
- The unit will correct the current time by receiving PDC
broadcasts whenever the power is turned off.
- Between 23:00 and 1:00, the Auto Clock function will
not operate even when the power is turned off.
The clock cannot be set automatically if you cannot
receive a channel in your area that carries a time signal.
In this case, set the clock manually.
The unit will also correct the current time automatically
at 8:00 and 1:10 if the unit is in standby mode or if you
are watching DVB channel.
Setup A General Setting A DivX
Provides DivX
®
VOD registration code and deactivation
code.
Refer to page 45 for more details.
Set the DivX
®
subtitle.
Setup A General Setting A HDMI
Make sure that the HDMI cable is connected and the TV
input is set to HDMI.
You can select the colour space for HDMI output.
Set the appropriate colour space for your display device.
When the connected device is not compatible with the
Y/Cb/Cr, HDMI signal is output as RGB regardless of
the setting.
If you do not want to output the audio through HDMI
(when you digitally output the audio through the DIGITAL
AUDIO OUT (COAXIAL) jack to your audio system, etc.),
you can set the HDMI audio output off.
Set to “OFF” when the HDMI sound is not required.
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
Select “Enhanced” if the black-white contrast is not
clear.
This setting is effective only for HDMI RGB output.
DivX
®
A DivX® VOD
B DivX Subtitle (Default: OFF)
A
B
DivX Subtitle
DivX® VOD
DivX Subtitle
OFF
English
Czech
Dutch
French
German
Hungarian
Italian
HDMI
A Format (Default: RGB)
B HDMI Audio (Default: ON)
C RGB Range (Default: Normal)
A
B
C
Format
HDMI
udio
RGB Ran
A
ge
Format
RGB
YCbCr
HDMI Audio
ON
OFF
RGB Range
Normal
Enhanced
E9TF0ED_EN.book Page 68 Wednesday, March 17, 2010 1:32 PM
69
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
Setup A General Setting A DVB Setting
You can make settings of the digital tuner from the DVB
Setting.
You can set “Adult Lock” to “ON” or “OFF” and also
change Pincode.
1 Select “ON” or “OFF” using [K \ L], then
press [ENTER\OK].
1) Enter your desired Pincode using
[the Number buttons], then press [ENTER\OK].
2) For confirmation, enter the Pincode again using
[the Number buttons] then press [ENTER\OK].
Enter the Pincode using [the Number buttons].
While entering the Pincode, use [0] or [CLEAR] to
clear the numbers once entered.
Note
Once “Adult Lock” has been set to “ON”, Pincode will be
required in order to view the locked channels or make
the timer recording of them, and when you try to execute
the “Auto Tuning” for DVB or “Edit Channels”.
If you forget the Pincode, press [4], [7], [3], [7] to cancel
the Pincode.
According to the age rating signal which comes with each
DVB programme, you can lock each programme.
1 Select “Maturity Lock” using [K \ L], then
press [ENTER\OK].
If “Adult Lock” is set to “ON”, enter the Pincode to
proceed to next step.
2 Select the desired rating using [K \ L], then
press [ENTER\OK].
Select “OFF” to disable “Maturity Lock”.
Once “Maturity Lock” has been set, Pincode will be
required in order to view the programme that exceeds
the age restriction.
In order to activate “Maturity Lock”, “Adult Lock” has
to be set to “ON”. To setAdult Lock”, refer toA Adult
Lock (Default: OFF)” on page 69.
Note
The Audio and Subtitle setting may not be available for
some broadcast.
To change the audio language, refer to “Multi Audio” on
page 26.
To display the subtitle or choose the subtitle language,
refer to “Subtitle” on page 27.
You can check the current DVB system software version
of this unit.
Setup A General Setting A Reset All
Select “Yes” using
[K \ L]
, then press
[ENTER\OK]
.
“Are you sure?” will appear. Select “Yes” using [K \ L], and
then press [ENTER\OK].
Note
The settings listed below will remain unchanged even after
resetting to the factory default.
- Clock setting
- Channel setting
- Parental lock setting
-DivX
®
VOD code
- Timer programmes
- OSD language setting
- DVB setting
DVB Setting
A Adult Lock (Default: OFF)
DVB
2 To set “Adult Lock” to “ON”:
To set “Adult Lock” to “OFF”:
B Maturity Lock (Default: OFF)
DVB
A
B
C
D
Adult Lock
Maturity Lock
Language
About
ON
OFF
Adult Lock
Maturity Lock OFF
C Language
DVB
Audio : Set the Audio language.
Subtitle : Set the Subtitle language.
D About
DVB
Reset All
Language
Audio
Subtitle
Reset to factory default?
Yes
No
E9TF0ED_EN.book Page 69 Wednesday, March 17, 2010 1:32 PM
70
EN
Playback
This unit can be output with HDMI, Component and Digital
Audio (COAXIAL) in VCR playback.
However, the image and the sound of VCR cannot be output
at the following condition.
When switching to the VCR mode while recording in the
DVD mode.
When selecting the DV channel (AV3).
During DVD to VCR dubbing.
1 Insert a pre-recorded tape, then press [PLAY B]
to begin playback.
2 During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
3 Press [PLAY B] to resume playback.
4 Press [STOP C] to stop playback.
5 Press [OPEN\CLOSE EJECT A] to eject the
tape.
Note
When a tape without record tab is inserted, the unit will start
playback automatically.
Tracking will be automatically adjusted upon playback. To
adjust the tracking manually, press [PROG. G\H].
Basic Recording and One-touch Timer
Recording (OTR)
The desired channel is selected by pressing
[the Number buttons] or [PROG. G\H] on the remote
control.
There is a tape with a record tab in the unit.
1 Insert a recordable videotape.
2 Select the recording speed using [REC SPEED].
The desired recording speed is selected in SP or LP
mode by pressing [REC SPEED].
3 Select the desired channel to record using
[PROG. G\H] or [the Number buttons].
Press [REC] to start recording.
To temporarily stop recording or to resume it, press
[PAUSE F].
After the unit has been in pause mode for 5 minutes, it will
stop automatically to protect the tape and the video head
from damage.
VCR Functions
Common Procedures
1 Press [STANDBY-ON Q] to turn on the unit.
To play back a tape, turn on the TV and be sure to
select the input to which the unit is connected.
2 Press [VCR].
Note for HDMI, Component and Digital
Audio (COAXIAL) Output in VCR
Playback
Playing back a Tape
VCR
VCR
Before recording, make sure:
Tape speed Recording / Playback Time
Type of tape E60 E120 E180 E240
SP (standard play) mode 1 hour 2 hours 3 hours 4 hours
LP (long play) mode 2 hours 4 hours 6 hours 8 hours
4 Basic Recording:
VCR
VCR
E9TF0ED_EN.book Page 70 Wednesday, March 17, 2010 1:32 PM
71
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
Press [REC] repeatedly until the desired
recording time (30 minutes to 8 hours) appears
on the TV screen.
One-touch Timer Recording will start.
When the unit reaches the specified time, it will be turned off
automatically.
To change the recording length during One-touch Timer
Recording, press [REC] repeatedly until desired length
appears.
To cancel One-touch Timer Recording within the specified
time, press [STOP C].
Note
The remaining recording time will appear on the TV screen
during One-touch Timer Recording. Press [DISPLAY] to see
it on the TV screen.
If VCR One-touch Timer Recording is completed during
DVD playback or recording, the VCR will be in stop mode
and the DVD keeps the current mode.
You cannot use the pause function during One-touch Timer
Recording.
When One-touch Timer Recording is finished and the power
is turned off, the unit will switch to the timer-standby mode
automatically if a timer recording has been programmed.
Press [TIMER SET] to cancel the timer-standby mode in
order to use the unit continuously.
5 Press [STOP C] when the recording is
completed.
To prevent accidental recording on a recorded cassette,
remove its record tab. To record on it later, cover the hole with
cellophane tape.
This function helps you to dub the contents in the DVC (digital
video camcorder) to VCR.
Insert a recordable videotape.
Make sure your DVC is in video mode.
1 Press [INPUT SELECT] repeatedly to select the
external input channel, then press
[PROG. G\H] repeatedly to select DV(AV3).
2 Select the recording speed using [REC SPEED].
(See page 70.)
3 Stop or pause the DVC where you want to start
dubbing.
4 Play back the DVC.
5 Press [REC].
The dubbing will start.
Note
Dubbing will start from where the tape is stopped.
Search
1 Press [SEARCH] so that the index search menu
appears.
2 Enter the number of recordings you want to
skip using [the Number buttons] within 30
seconds.
3 Press [FWD D] or [REV E] to start index
search.
If you want to go in the forward direction, press
[FWD D].
If you want to go in the reverse direction, press [REV E].
After index search, the VCR will play back the tape
automatically.
Note
This function is not available during recording.
Every time a tape is recorded, an index mark is written on
the tape.
You can make the index mark up to 20.
This feature allows you to go to a specific point on a tape by
entering the exact amount of time you want to skip in order to
reach the point.
1 Press [SEARCH] repeatedly until the time
search menu appears.
2 Enter your desired time to skip using
[the Number buttons] within 30 seconds.
3 Press [FWD D] or [REV E] to start time
search.
If you want to go in the forward direction, press
[FWD D].
If you want to go in the reverse direction, press [REV E].
After index search, the unit will play back the tape
automatically.
Note
This function is not available during recording.
Press [STOP C] to stop the search.
If the tape reaches the end during the search, this unit will
cancel it and rewind the tape.
You can set the time up to 9:59 (9h. 59min.).
One-touch Timer Recording:
Prevent accidental erasure
DVC to VCR Dubbing
Preparing for DV dubbing (DVC to VCR):
0:30
8:00 7:30
1:00
Normal Recording
Record tab
VCR
VCR
Index Search
Time Search
VCR
VCR
VCR
VCR
E9TF0ED_EN.book Page 71 Wednesday, March 17, 2010 1:32 PM
72
EN
Other Operations
To cue or review picture during playback
(Picture Search):
Press [FWD D] or [REV E] during playback.
Press it again and the unit will search in super high speed (in
the LP mode only).
To freeze the picture on TV screen during playback
(Still mode):
Press [PAUSE F]. Each time you press the button, the picture
will be forwarded frame by frame.
If the picture begins to vibrate vertically during the still mode,
stabilise the picture by pressing the [PROG. G\H]. If the
picture is distorted or rolling vertically, adjust the vertical hold
control on your TV, if equipped.
To reset the tape counter:
Press [CLEAR].
To play back in slow forward motion:
During playback, press [PAUSE F], then press [FWD D].
If the noise bars appear on the TV screen, you can reduce it
by pressing [PROG. G\H]. Slow reverse is not available in
VCR mode.
Note
Still / Slow / Pause mode will be automatically cancelled
after 5 minutes to prevent damage to the tape and the video
head.
To return to normal play back from the Picture Search / Still /
Slow mode, press [PLAY B].
Changing the Video Colour System
This unit will distinguish the video colour system (SECAM,
PAL or MESECAM) automatically according to the format of a
pre-recorded video tape during playback or the input signal
from the tuner or external devices.
To change the video colour system manually, press
[SYSTEM].
Each time you press [SYSTEM], the colour system will
change as follows.
Note
If the playback picture on the TV screen is black and white,
change the video colour system manually.
When you change the video colour system manually, be
sure to change it before recording. If you select the wrong
video colour system for recording, the colour of the picture
may be deteriorated.
Hi-Fi Stereo Sound System
This unit will record and playback Hi-Fi stereo sound.
In addition, it has an A2 and NICAM stereo sound decoder.
This unit will receive stereo and bilingual broadcasts and it is
possible to record in several ways and to play back the sound.
Selecting the Audio Mode
You can select each mode by pressing [AUDIO] on the
remote control. Each mode is indicated on the TV screen as
following.
Audio mode during playback of the recorded tape in Hi-Fi
mode:
Audio mode during reception of bilingual broadcasts:
Note
If you play back non-Hi-Fi tapes, the unit will play back
automatically in monaural even if you select any mode.
If the stereo signal becomes weak, the broadcast is
automatically recorded in monaural.
VCR
VCR
Mode Audio output
Display on the
TV screen
Stereo Stereo STEREO
L L audio from both speakers LEFT
R R audio from both speakers RIGHT
Normal Monaural MONO
Mode Audio output
Display on the
TV screen
Main Main audio from the both speakers Main
Sub Sub audio from the both speakers Sub
Main /
Sub
Main audio from the left speaker
Sub audio from the right speaker
Main
Sub
AUTO SECAM PAL MESECAM
E9TF0ED_EN.book Page 72 Wednesday, March 17, 2010 1:32 PM
73
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
Troubleshooting
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some
simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
Others
Symptom Remedy
POWER
The power does not turn on. Check that the AC power cord is connected securely.
Batteries of the remote control are weak.
•Press [TIMER SET] to cancel the timer-standby mode. (When both DVD and
VCR is in timer-standby mode, you cannot operate the unit.)
The unit turns on automatically without
any operation.
The unit turns on automatically 2 seconds before the timer recording.
GENERAL
The unit does not function. ” or error message appears if the operation is prohibited.
Batteries of the remote control are weak or exhausted.
No picture, sound or menu appears on
the screen.
Check if the connections are made securely and correctly.
Check if the cables are damaged.
Check if a correct external input channel is selected on your TV. (See page 23.)
Check if you have completed “Channel” setting. (See pages 21-23.)
“Clock” setting and “Channel” setting
cannot be performed.
If a recording is in progress, these operations cannot be performed.
The unit does not operate properly. Moisture has condensed inside the unit. Remove the disc and leave the unit
turned on for about 2 hours until the moisture evaporates. (See page 3.)
The clock display does not appear on
the front panel display.
Check that the AC power cord is connected securely.
(In case of power failure) Check the breaker and “Clock” setting.
When the unit is in standby mode, front panel display is off because Power
Saving mode is applied to this product.
When you forget the password for
parental lock.
Please cancel the password and the set level. (See page 64.)
DV signal cannot be input. Before connection, turn on the power supplies for both this unit and the DVC,
and make sure that these units have stopped.
Only a “DVC-SD” signal can be input from the DVC to this unit. Other types of
signals are not supported.
Do not connect any device other than the DVC. Even if a recorder or PC with
another DV terminal is connected, the DV function will not operate.
If the DVC is not recognised after connection, turn off the power supply for the
unit and re-connect the DVC.
The DVC cannot be operated with this
unit.
Signal input or DVC operation from this unit may be disabled depending on the
type of DVC.
If a DVC signal cannot be input, use an external input (AV2) for analogue
connection via audio/video cables. Use Scart adaptor for connecting to AV2.
DVC control may be disabled depending on the type of DVC, even in a mode
other than camera mode. In this case, switch to DVD control and execute the
normal recording procedure while operating the DVC.
Certain functions of the DVC cannot
operate.
Some functions may not operate depending on the type of DVC. For example, if
the DVC does not support slow playback mode, the slow playback function is
disabled.
With DV (AV3), the disc display menu does not appear unless disc playback is
executed.
DV audio signal cannot be switched. For recording with the DVC, the recording audio signal can be set to 12 bits or
16 bits. However, when 16-bit recording mode is selected, audio signal cannot
be switched. To record an audio signal, set it to 12 bits.
E9TF0ED_EN.book Page 73 Wednesday, March 17, 2010 1:32 PM
74
EN
GENERAL
No image from HDMI connection. Check the HDMI connection. (Check the status of the HDMI related indications.)
Check whether the connected monitor device or other device supports HDCP.
(This unit will not output a video signal unless the other device supports HDCP.)
Check the setting of HDMI.
Check whether the output format of this unit (HDMI FORMAT) matches the
supported input format of other connected device.
If the unit is connected to the unauthorised display device with an HDMI cable,
the audio and video signals may not be output when playing back a commercial
DVD-video.
CHANNEL
TV channels cannot be changed. Check if the connections are made securely and correctly.
Check if the cables are damaged.
Try “Channel” setting by following the steps on pages 21-23.
Some settings are lost even though you
followed the procedure correctly.
If you unplug the AC mains cable while the warning message, “Saving settings.
Please wait.”, is displayed, some settings may be lost. Do not unplug the AC
mains cable while the message is displayed (It will take about 1 minute.).
Only specific channels do not appear. The channels may be set to be skipped. (See pages 22, 25.)
Though auto tuning was completed,
you cannot watch the DVB and
analogue channels.
Confirm whether an antenna cable is connected correctly and try to tune again.
(See pages 21-23.)
If you move the unit to a different area, you will need to perform auto tuning
again.
The TV channel which you have been
able to watch before has disappeared
and “No signal” is displayed.
RECORDING
GENERAL
The image from the external device
cannot be displayed.
Try pressing [INPUT SELECT] repeatedly to select the external input channel,
then press [PROG. G\H] repeatedly to select your desired channel.
Turn on all connected devices.
Check if the connections are made securely and correctly.
DVD
Recording is impossible. This unit cannot record programmes that contain copy protection signal. This is
not a malfunction.
The space of the recording media may be used up. Try deleting unnecessary
titles, or exchange it with the recordable media.
The maximum number of titles or chapters has exceeded. Delete the
unnecessary titles to make enough space or insert a new recordable media.
Check if the disc is CPRM compatible. Copy-once programmes can only be
copied onto the disc which is CPRM compatible.
Check if the disc is protected or finalised. Undo the protection or the finalisation.
Video mode DVD-RW once formatted in other unit cannot be recorded in this
unit unless formatted in this unit.
Check if the connections are made securely and correctly.
Timer recording cannot be
performed.
The internal clock of the unit may have been stopped due to a power failure that
lasted for more than 30 seconds. Reset the clock. (See page 67.)
“Repairing” appears on the TV
screen.
If there is a power failure or unplugging during recording, finalising, formatting or
editing (even after “Repairing” disappears), a repairing process will begin
automatically just after turning the unit on again.
It may take several minutes up to about several hours.
In a case you intend to cancel the
repairing process.
If you intend to cancel the repairing process, press [OPEN\CLOSE A] on the
front panel, then select “Yes” and press [ENTER\OK]. After that, press
[OPEN\CLOSE EJECT A] to take out the disc. The disc cancelled during the
repairing process MAY NOT work.
The indication
“”
does not disappear.
” may remain on screen for the maximum of
20 seconds even after it reached 100%. This is not a malfunction.
VCR
Recording does not start
immediately after pressing [REC].
Make sure the videotape has a recorded tab when you record to a videotape. If
needed, cover the hole with cellophane tape.
Symptom Remedy
Repairing
Do you want to cancel a repairing
process? When selecting “Yes”,
the disc may not be usable.
No
Yes
Repairing
100%Writing to Disc
100%Writing to Disc
90_Others.fm Page 74 Wednesday, April 14, 2010 9:24 AM
75
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
PLAYBACK
GENERAL
TV aspect ratio does not match your
TV screen.
Check “TV Aspect” setting. (See page 66.)
A different aspect ratio will be used when the aspect ratio specified by the disc
is not supported by this unit.
Playback picture is distorted.
Colour of the picture is abnormal.
During fast forward or fast reverse, playback picture may be distorted. This is
not a malfunction.
Connect to TV directly. When you connect this unit with the television via VCR
or other devices, the picture may be distorted due to the copy-protection signal.
Check if the cables are damaged.
Keep the equipment which may cause electrical disturbances, such as a cellular
phone, away.
There is no sound, or no subtitle. • Turn on all connected devices.
Check if the external input channel is set correctly.
Check if the connections are made securely and correctly.
If using the HDMI connection, sound is not output when “HDMI Audio” is set to
“OFF”.
Check the RCA audio cable connection. If you are using HDMI-DVI conversion
cable, you must connect the RCA audio cable, too.
If using the HDMI connection, check whether the output format of this unit
(HDMI FORMAT) matches the supported input format of other connected
device.
DVD
Playback does not start from the
beginning.
Resume function may be activated. Refer to page 47 to cancel the resume
point.
Playback cannot be performed. • Check if the playable disc is inserted.
Check if the disc is loaded correctly with the labelled side facing up.
Discs made on other devices or on personal computers cannot be played back
on this unit unless it is finalised on the device.
Even if it is finalised, the performance of those discs are not guaranteed on this
unit.
The disc may be dirty or flawed. Clean the disc.
Check if all the connections are made correctly.
Check “Parental Lock” setting. (See page 64.)
Playback of DVD is prohibited from 2 minutes before the programmed start time
of a timer recording when the recording media is DVD.
There is no sound, or no subtitle. • Check if all the connections are made correctly.
Check if the “Audio Out” is set correctly. (See pages 64-65.)
There is a possibility that the selected subtitle language is not supported by the
disc.
Digital audio setting cannot be
changed to main audio (L), sub
audio (R) or combination of both.
If the audio source is in the Dolby Digital format, set “Dolby Digital” setting to
“PCM” in “Playback” menu. (available only for DVD) (See page 65.)
Audio language or the subtitle
language of the DVD cannot be
changed.
Multilingual subtitles are not supported by the disc.
Some audio languages or the subtitle languages can be changed only from the
disc menu. Please refer to the disc’s manual.
Angles cannot be changed. Even though the multi-angle feature is supported by the disc, that does not
mean all the scenes are shot from multi-angles. Changing angles is available
only for those scenes shot from the multi-angle.
The disc cannot be played back on
other player even though it is
finalised properly.
Some DVD players do not play back the disc made on other recorder. Refer to
the manual of the unit.
VCR
Picture noise appears. Adjust tracking control for better picture by pressing [PROG. G\H] while you
are playing back a videotape.
Head cleaning for VCR may be necessary.
Refer to “AUTO HEAD CLEANING” on page 4.
The unit does not play back the
videotape.
Check if a videotape is in this unit.
The motor rotates even when
playback / recording is stopped.
The motor may rotate for the duration of approximately 5 minutes for efficient
operation. This is not a malfunction.
Symptom Remedy
E9TF0ED_EN.book Page 75 Wednesday, March 17, 2010 1:32 PM
76
EN
Troubleshooting for Error Messages
EDITING
DVD
Titles cannot be edited or deleted. The titles or the disc itself may be protected. Cancel the protection by following
the steps on page 57 for title protection and page 41 for disc protection.
Dubbing cannot be executed. When the number of the titles or the chapters exceeds the maximum recordable
number, the dubbing will not be executed.
Titles cannot be edited or deleted. The titles in the DVD-R cannot be edited or deleted if they are finalised. If it is
DVD-RW, undo the finalisation by following the steps on page 41.
The capacity of the disc doesn’t
increase even if the recorded
programme is deleted.
With video mode DVD-RW, the disc space will increase only when the last title is
deleted. With DVD-R, deleting a title will not increase the disc space.
Dubbing cannot be executed. Check if the disc is compatible for recording. (See page 28.)
REMOTE CONTROL
The remote control does not function. No batteries in the remote control or the batteries may be weak. Replace the
batteries.
Make sure there is no obstacle between the remote control and the unit.
Try getting closer to the unit. (See page 12.)
If above solutions do not solve the problem, please call an Authorised Service
Centre.
Symptom Remedy
Error message Cause Solution
Disc Error
— Please eject the disc. —
Playback feature may not be
available on this disc.
An unplayable disc is inserted in the unit.
The disc is upside down.
Insert a standard disc. (See pages 8-9.)
Insert the disc with the labelled side
facing up.
Unknown USB Device/File
— Please Remove the USB. —
Insert a compatible USB device.
Format of the files in the connected USB
device are not supported.
Incompatible USB device is connected.
Insert a compatible USB device with
supported file format. If this does not
solve the problem, use other type of
compatible USB device.
Region Error
— Please eject the disc. —
Playback is not authorized in your
region.
Playback is not authorised in the region
of the DVD-video that you inserted in the
unit.
Insert a DVD-video with region codes 2
or ALL.
Parental Lock On
The current selected parental level
prohibits playback.
The current selected parental level in
“Setup” menu prohibits playback.
Check the “Parental Lock” setting.
(See page 64.)
Recording Error
This programme is not allowed to be
recorded.
The recording function encountered a
copy prohibited programme.
Original source is in NTSC system.
You cannot record copy prohibited
programmes.
Recording Error
This programme is not recordable in
Video mode.
You are trying to record a copy-once
programme onto a DVD-RW disc in
video mode.
Set “Format Mode” to “VR mode”.
(See page 30.)
Recording Error
Can not record on this disc.
You are trying to record onto a disc that
is unrecordable, or the disc status does
not satisfy recording requirements.
The disc is dirty.
The disc is damaged.
You are trying to record onto a VR mode
DVD-RW disc which contained
recordings from another recorder.
Insert a recordable disc, and ensure the
disc status satisfies the recording
requirements. (See page 28.)
Clean the disc with a cleaning cloth.
Replace the disc.
Disc may need formatting.
Recording Error
Cannot record. Disc not CPRM
comp.
You are trying to record a copy-once
programme onto a DVD disc that is not
compatible with CPRM.
Insert a ver. 1.1 or ver. 1.2 DVD-RW
disc. (Compatible with CPRM.)
Recording Error
This disc is protected and not
recordable.
You are trying to record onto the VR
mode DVD-RW disc that is set as
protected in “Setup” Menu.
Remove the disc protect setting in “DVD
Menu” menu. (See page 41.)
Recording Error
Disc is full.
(No area for new recording)
You are trying to record onto the VR
mode DVD-RW disc that has no space
for recording.
Insert a recordable disc with enough
recording space.
Delete unnecessary original titles.
(See page 55.)
E9TF0ED_EN.book Page 76 Wednesday, March 17, 2010 1:32 PM
77
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
* If you are still having trouble with the unit after checking all the Troubleshooting points, write down the error code and the error
description and consult your dealer.
Recording Error
You cannot record more than 99
titles on one disc.
(The maximum is 99)
You are trying to record onto the
DVD-RW / -R disc on which the number
of recorded titles has reached the
maximum (99).
Delete unnecessary original titles.
(See page 55.)
Recording Error
You cannot record more than 999
chapters on one disc.
(The maximum is 999)
You are trying to record onto the VR
mode DVD-RW disc on which the
number of recorded chapters has
reached the maximum (999).
Delete unnecessary chapter mark from
an Original list. (See page 56.)
Recording Error
You cannot record on this disc as
Control Information is full.
This disc has no space to write Control
Information when recording or deleting
contents.
When editing has been repeatedly
performed, the control information area
may become full even though the
recording area has enough space.
Delete unnecessary original titles.
(See page 55.)
Recording Error
You cannot record on this disc as
Power Calibration Area is full.
When recordings are performed
repeatedly onto an unstable disc, this
area may become full.
Every time you insert a disc for
recording, part of the disc’s working area
will be used. If you repeat this frequently,
it will be used up quicker and you may
not be able to record maximum number
of titles for the disc.
Insert a new disc.
Recording Error
This disc is already finalised.
You are trying to record onto a disc that
is already finalised.
Release the finalising for the disc.
(See page 41.)
Error message Cause Solution
E9TF0ED_EN.book Page 77 Wednesday, March 17, 2010 1:32 PM
78
EN
Language Code
Language Code
Abkhazian 4748
Afar 4747
Afrikaans 4752
Albanian 6563
Amharic 4759
Arabic 4764
Armenian 5471
Assamese 4765
Aymara 4771
Azerbaijani 4772
Bashkir 4847
Basque 5167
Bengali;Bangla 4860
Bhutani 5072
Bihari 4854
Bislama 4855
Breton 4864
Bulgarian 4853
Burmese 5971
Byelorussian 4851
Cambodian 5759
Catalan 4947
Chinese 7254
Corsican 4961
Croatian 5464
Czech 4965
Danish 5047
Dutch 6058
English 5160
Esperanto 5161
Estonian 5166
Faroese 5261
Fiji 5256
Finnish 5255
French 5264
Frisian 5271
Galician 5358
Georgian 5747
German 5051
Greek 5158
Greenlandic 5758
Guarani 5360
Gujarati 5367
Hausa 5447
Hebrew 5569
Hindi 5455
Hungarian 5467
Icelandic 5565
Indonesian 5560
Interlingua 5547
Interlingue 5551
Inupiak 5557
Irish 5347
Italian 5566
Japanese 5647
Javanese 5669
Kannada 5760
Kashmiri 5765
Kazakh 5757
Kinyarwanda 6469
Kirghiz 5771
Kirundi 6460
Korean 5761
Kurdish 5767
Laothian 5861
Latin 5847
Latvian; Lettish 5868
Lingala 5860
Language Code
Lithuanian 5866
Macedonian 5957
Malagasy 5953
Malay 5965
Malayalam 5958
Maltese 5966
Maori 5955
Marathi 5964
Moldavian 5961
Mongolian 5960
Nauru 6047
Nepali 6051
Norwegian 6061
Occitan 6149
Oriya 6164
Oromo (Afan) 6159
Panjabi 6247
Pashto; Pushto 6265
Persian 5247
Polish 6258
Portuguese 6266
Quechua 6367
Rhaeto-Romance 6459
Romanian 6461
Russian 6467
Samoan 6559
Sangho 6553
Sanskrit 6547
Scots Gaelic 5350
Serbian 6564
Serbo-Croatian 6554
Sesotho 6566
Setswana 6660
Shona 6560
Language Code
Sindhi 6550
Singhalese 6555
Siswat 6565
Slovak 6557
Slovenian 6558
Somali 6561
Spanish 5165
Sundanese 6567
Swahili 6569
Swedish 6568
Tagalog 6658
Tajik 6653
Tamil 6647
Tatar 6666
Telugu 6651
Thai 6654
Tibetan 4861
Tigrinya 6655
Tonga 6661
Tsonga 6665
Turkish 6664
Turkmen 6657
Twi 6669
Ukrainian 6757
Urdu 6764
Uzbek 6772
Vietnamese 6855
Volapuk 6861
Welsh 4971
Wolof 6961
Xhosa 7054
Yiddish 5655
Yoruba 7161
Zulu 7267
Language Code
E9TF0ED_EN.book Page 78 Wednesday, March 17, 2010 1:32 PM
79
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
Specifications
Note
The specifications and design of this product are subject to change without notice.
General
VCR video heads Four heads
Power requirements 220–240 V ± 10 %, 50 Hz ± 0.5 %
Power consumption 35 W
Power consumption (standby) 0.93 W
Weight 5.0 kg
Dimensions (width x height x depth) 435 x 99.5 x 388 mm
Operating temperature 5°C to 40°C
Operating humidity Less than 80 % (no condensation)
TV system PAL-B/G, SECAM-LL
Recording
Recording format Video Recording (VR) format (DVD-RW only), video format (DVD-RW, DVD-R)
Recordable discs DVD-ReWritable, DVD-Recordable
Video recording format
Sampling frequency
Compression format
13.5 MHz
MPEG
Audio recording format
Sampling frequency
Compression format
48 kHz
Dolby Digital
Tuner
Analogue channels
L (SECAM L)
BG (PAL B/G)
F1 - E69
E2 - E69
DVB-T channels
VHF
UHF
F5 - F10
E21 - E69
Input/Output
Front Panel :
DV input
DV 4-pin jack
IEEE 1394
USB input
TYPE A
USB 2.0
Bus power current: MAX. 500 mA
Rear Panel :
VHF/UHF antenna input/output terminal 75
Audio input /output
Input /output level
Two 21-pin scart sockets (AV1, AV2)
2 Vrms (input impedance: more than 10 k
/ output impedance: less than 1 k
)
Video input /output
Input /output level
Two 21-pin scart sockets (AV1, AV2)
1 Vp-p (75 ) each
Component video output
Output level
Three RCA connectors
Y: 1.0 Vp-p (75 )
P
B
/C
B
, P
R
/C
R
: 0.7 Vp-p (75 ) each
Audio output
Output level
Two RCA connectors
2 Vrms (output impedance: 680 )
Digital audio output
Output level
One Coaxial pin jack
500 mVp-p (75 )
HDMI output HDMI jack
90_Others.fm Page 79 Tuesday, May 11, 2010 10:08 PM
© 2010-2011 FUNAI ELECTRIC All rights reserved.
Printed in P.R.C.
1VMN29438B / E9TF0ED ★★★
* 1 V M N 2 9 4 3 8 B *
Declaration of Conformity
This product complies with the requirement of the related directives.
is in compliance with the related regulations.
We: FUNAI ELECTRIC EUROPE Sp. z o.o.
ul. Inżynierska 1, 67-100,
Nowa Sól, Poland
declare that the following product:
DVD / Video Cassette recorder
Model WD6D-D4413DB
Trade Name: Funai
Web Site: http://www.funai.eu
99_BackCover.fm Page 80 Tuesday, May 11, 2010 10:09 PM
57

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Funai-WD6D-D4413DB
  • dag,
    kan er iemand zeggen wat ik moet doen want mijn toestel gaat niet meer zo goed. Als ik het opzet gaat die enkele seconde aan en dan knippert hij aan uit drie maal en dan blijft hij uit.
    Als er iemand een oplossing voor heeft want mijn toestel is juist 2 weken over zijn garantie. Pech dus.
    Dank Gesteld op 23-8-2013 om 11:11

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Funai WD6D-D4413DB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Funai WD6D-D4413DB in de taal/talen: Engels als bijlage per email.

De handleiding is 4,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Funai WD6D-D4413DB

Funai WD6D-D4413DB Gebruiksaanwijzing - Nederlands - 83 pagina's

Funai WD6D-D4413DB Gebruiksaanwijzing - Deutsch - 84 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info