503609
5
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
Telewizor LED LCD HD
LED LCD HD Fernseher
LED LCD HD tévé
Televizor LED LCD HD
LED LCD HD televizor
LED LCD HD televízia
Téléviseur LED LCD HD
LED LCD HD teler
LED LCD HD televizors
LED LCD HD televizorius
LED LCD HD Television
Светодиодный ЖК телевизор HD
LED LCD HD телевизия
HD РК-телевізор зі світодіодним
Polski
Instrukcja obsługi
Deutsch
Bedienungsanleitung
Magyar
Használati Utasítás
Român
Manualul utilizatorului
Čeština
Uživatelská příručka
Slovenčina
Príručka používateľa
Français
Manuel du propriétaire
Eesti keel
Kasutusjuhend
Latviešu
Lietotāja rokasgrāmata
Lietuviškai
Instrukcija
English
Owner’s Manual
Русский
Упътване на потребителя
Бъларскиг
Українська
Інструкція для власника пристрою
Руководство для пользователя
LED40-H9825M
2.A%QXGTHO2CIG/QPFC[,WPG#/
EN
2
PRECAUTIONS
To aid reporting in case of loss or theft, please record the unit’s model and serial numbers in the space provided. The numbers
are located at the rear of the unit.
Model number:_________________ Serial number:_________________
PRECAUTIONS
CAUTION
1. Do not attempt to open the cabinet. There are no user
serviceable parts inside. Refer all servicing to qualified service
personnel.
2. Slots and openings in the cabinet and the sides or bottom
are provided for ventilation. To ensure reliable operation
and to protect the unit from overheating, these openings
must not be blocked or covered. Avoid installation in
enclosed spaces such as bookcases unless proper
ventilation is provided.
3. Keep the unit away from radiators and other heat sources.
4. Do not push objects of any kind into the unit through the
cabinet slots or openings as they could touch electrically
live parts or short circuit parts resulting in a fire or electric
shock.
5. To prevent fire or shock hazard, do not expose this unit to
dripping or splashing, no objects filled with liquids, such as
vases, should be placed on the unit.
6. Use the unit on a horizontal (flat) surface only.
7. Do not place any combustible objects on the unit
(candles, etc.).
8.
The LCD panel used in this unit is made of glass. Therefore,
it can break when the unit is dropped or applied with
impact. Be careful not to be injured by broken glass pieces
in case the LCD panel breaks. The LCD panel is a very high
technology product with 921,600 thin film transistors,
giving you fine picture details. Occasionally, a few non-active
pixels may appear on the TV screen as a fixed point of
blue, green or red. Please note that this does not affect the
performance of your unit.
9. Disconnect the mains plug to switch off when the unit
becomes faulty or not in use.
10. The mains plug shall remain readily operable.
11. Read the manual instructions to ensure correct and safe
installation and interconnection of the unit in multimedia
systems.
12. Keep a distance of 20cm around the ventilation openings
of the unit.
13.
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
POWER SUPPLY
The main power supply is engaged when the main plug is plugged in a 220-240 V
• At least 2 people are required when carrying this unit.
• Make sure to hold the upper and bottom frames of the unit firmly as illustrated.
, 50 Hz AC outlet. To operate the unit,
press
(power) to tu
rn on the unit.
WARNING: LIVE PARTS INSIDE. DO
WHEN CARRYING THIS UNIT
NOT REMOVE ANY SCREWS.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the apparatus’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (ser
vicing) instructions in the
literature accompanying the apparatus.
Do not place the unit on the furniture that is capable of being tilted by a child or an adult leaning, pulling, standing or
climbing on it. A falling unit can cause serious injury or even death.
WARNING: To prevent the spread of fire, keep candles
or other open flames away from this
product at all times
2.A'0HO2CIG/QPFC[,WPG#/
EN
3
INTRODUCTION
Contents
PRECAUTIONS ......................................................................2
INTRODUCTION..................................................................3
Supplied Accessories ................................................................................4
Symbols Used in this Manual ...............................................................4
Attaching the Base.....................................................................................4
Adjusting the Swivel Angles..................................................................4
Installing the Batteries...............................................................................4
Remote Control..........................................................................................4
Your TV ...........................................................................................................5
PREPARATION FOR USE ....................................................6
Antenna Connection................................................................................6
External Connection.................................................................................6
Plug In the AC Power Cord................................................................. 7
Initial Setup..................................................................................................... 7
OPERATIONS .........................................................................8
Watching a TV Programme..................................................................8
Channel List ...................................................................................................8
Sleep Timer....................................................................................................8
ECO Mode.....................................................................................................8
Sound Select..................................................................................................8
TV Screen Information ............................................................................9
EPG (Electronic Programme Guide)...............................................9
Switching the Input Mode......................................................................9
Photo / Music / Video Playback....................................................... 10
Changing the TV Screen Display Mode ..................................... 14
OTHER SETTINGS ............................................................. 15
Picture Adjustment................................................................................. 15
Advanced Picture Adjustment......................................................... 15
PC Settings ..................................................................................................16
Sound Adjustment .................................................................................. 16
TV Settings .................................................................................................. 17
Channel Settings.......................................................................................17
Setup Adjustment.................................................................................... 19
Subtitle Settings ........................................................................................ 19
Teletext......................................................................................................... 20
Common Interface (CI)....................................................................... 20
DivX® VOD..............................................................................................20
Software Download...............................................................................21
Demo ............................................................................................................. 21
Reset Default ............................................................................................. 21
Parental Lock..............................................................................................21
fun-Link..........................................................................................................22
TROUBLESHOOTING GUIDE........................................ 23
OTHER INFORMATIONS ................................................ 24
Specifications.............................................................................................. 24
Trademark Information ........................................................................ 24
Declaration of Conformity.................................................................25
Servicing ........................................................................................................25
Cabinet Cleaning...................................................................................... 25
Panel Cleaning ........................................................................................... 25
License ........................................................................................................... 25
Pb, Hg, Cd
License Statement.............................................. end of book
2.A'0HO2CIG/QPFC[,WPG#/
EN
4
Supplied Accessories
Remote Control
Batteries (R03 / AAA, 1.5 V x 2)
Owner's Manual
Screw kit for attaching the base
AC power cord
Symbols Used in this Manual
The followings are the description for the symbols used in
this manual.
If neither symbol appears, the operation is applicable to
both.
Attaching the Base
You must attach the base to the unit to have it as a table
top unit. Be sure the front and rear of the base match the
proper direction.
1 Insert the main unit into metal neck of the base.
Make sure not to put the AC power cord between
the base and the unit.
At least 2 people are required for this step.
2 Drive Phillips head screws into the 4 threaded holes
at the rear of this unit until they are tight.
To remove the base from this unit
Unscrew the Phillips head screws on step 2. After the
screws are removed, move the unit up from the base.
Be careful not to drop the unit when you remove it.
Adjusting the Swivel Angles
You can adjust the viewing angle of your TV.
Installing the Batteries
Install the batteries (R03 / AAA, 1.5 V x 2) matching the
polarity indicated inside battery compartment of the
remote control.
Remote Control
Digital TV operation
Analogue TV operation
When attaching the base, ensure that all screws are tightly
fastened. If the base is not properly attached, it could cause the
unit to fall, resulting in injuries as well as damage to the unit.
Make sure the table is in a stable location.
DTV
ATV
While adjusting the swivel angle of your TV, hold the base firmly
to prevent the TV from tipping over and falling down.
Top of the unit
approx.
15°
approx.
15°
approx.
15°
approx.
15°
1
2
3
4
6
7
8
9
5
10
11
17
18
19
20
21
22
16
15
12
13
14
2.A'0HO2CIG/QPFC[,WPG#/
EN
5
Your TV
1. (power) (p. 6, 7)
Turns the unit on and go into the standby mode.
2. SLEEP (p. 8)
3. Number buttons (p. 8)
Selects the desired channel in TV mode and enters
the password in the PIN code input field.
4. ASPECT (p. 14)
5. BACK (p. 8)
Returns to the previous display.
6. Ÿ¬/¬ź¬/¬Ż¬/¬Ź (cursor) (p. 7)
7. OK
8. MENU (control panel) / MENU (remote
control) (p. 15)
9. AUDIO (p. 8)
10. VOL. / (control panel) /
+/– (remote control) (p. 8)
VOL. works same function as Ź (cursor) and
VOL. works same function as Ż (cursor) on
the menu.
11. (mute) (p. 8)
12. RED / GREEN / YELLOW / BLUE (p. 8, 9, 10, 11,
20, 22)
Uses for EPG / teletext / fun-Link.
13. buttons (p. 22)
Functionally useful for fun-Link.
14. (expand) / (subpage) / (hold) /
(text) / (reveal) / (index) (p. 20)
15. SOURCE (p. 9)
SOURCE (control panel) works same function as
OK to determine the setting menu.
16. PICTURE MODE (p. 15)
17. SOUND MODE (p. 16)
18. GUIDE (p. 9)
19. ECO (p. 8)
20. (information) (p. 9)
21. PROG. Ÿ¬/¬ź (control panel) /
/ (remote control) (p. 8)
PROG. Ÿ¬/¬ź (control panel) works same
function as Ÿ¬/¬ź (cursor) on the menu.
22. (subtitle) (p. 19)
Terminals
23. PC (VGA) Input jack (p. 7)
24. USB terminal (p. 10)
25. CI slot (p. 20)
26. HDMI (HDMI 1 / HDMI 2 / HDMI 3) Input jack
(p. 6)
27. Headphone Audio Output jack
28. (aerial) Input jack (p. 6)
29. Audio Input jack for PC connection (p. 7)
30. Coaxial Digital Audio Output jack (p. 6)
31. Component Video, Composite Video and Audio
(L/R) Input jacks (p. 6)
32. SCART jack (p. 6)
33. AC power cord Inlet
34. Main power switch
Turns this unit's main power on and off.
35. Illuminance sensor window
Alter the brightness of the TV screen automatically
by detecting your room lighting level. Do not block
anything in front of its window to work properly.
36. Standby / Power indicator
Lights up red when the unit goes into standby
mode.
Light off when power is on.
37. Infrared sensor window
Receives the infrared rays transmitted from the
remote control.
10
26
23
24
27
25
26
15
21
8
1
29
31
30
28
34 33
32
3735 36
Data input from USB flash memory only.
User should not connect any devices to the USB terminal such
as digital camera, keyboard, mouse, etc. (because these will not
work.)
The software update is, in most cases, handled by an authorized
service person or in some circumstances the user may be asked
to do the software update themselves.
The Audio (L) jack is for monaural input. The sound is heard
from both speakers. Use this jack for a monaural audio devices.
2.A'0HO2CIG/QPFC[,WPG#/
EN
6
PREPARATION FOR USE
Antenna Connection
1
Connect an RF cable to (aerial) Input jack at the
rear of this unit.
2 Plug this unit into an AC outlet.
3 Turns on the main power switch.
4 When the Standby / Power indicator on the front
panel lights red, then press to turn on the unit.
External Connection
HDMI Connection (HDMI 1 / HDMI 2 / HDMI 3 )
SCART Connection
Component / Composite video Connection
Audio Output connection
For digital broadcasting only
Read this first
No supplied cables are used with these connection. Please
purchase the necessary cables at your local store.
Illustration in the following connection are example. Read the
manual accompanying your device for more detail.
Before you connect, be sure your antenna or other device is
connected properly before plugging in the AC power cord.
If you like to connect an active DVB-T antenna, the antenna
must have its own power supply.
It is not possible to power the antenna from the TV.
This unit accepts 480i / 480p / 576i / 576p / 720p / 1080i /
1080p video signals and 32 kHz / 44.1 kHz / 48 kHz only 2
channel audio signals (LPCM).
You need to select “PCM” for the digital audio output of the
device you connect. Make sure the device outputs the digital
audio. Audio sometimes makes no sound if you select
“Bitstream”, etc.
Dear Customer,
By connecting an HDMI cable to your Funai LCD TV,
you have to use only a certified HDMI cable to guarantee
a sufficient immunity against parasitic frequency radiation.
A certified HDMI cable can be identified by the HDMI
logo on the cable or the cable package.
Your TV
RF cable
VHF/UHF
MIXER
VHFUHF
Your TV
Your device
HDMI cable
This unit accepts 480i / 480p / 576i / 576p / 720p / 1080i video
signals for component connection.
Make sure the rest of Component Video jacks (Pb/Pr) are
unplugged completely when you plug the Composite Video
jack to Y / VIDEO terminal.
Your TV
Your device
SCART cable
Input Output
S-Video
Audio
(L/R)
CVBS RGB Video and Audio (L/R)
Yes Yes Yes Yes
Outputs the RF input
signal converted as CVBS
signal.
AUDIO
COMPONENT
/ VIDEO IN
L
R
Y
/ VIDEO
Pb
Pr
AUDIO
OUT
COMPONENT
VIDEO OUT
Your TV
Your device
audio
cable
component video cable
composite video
cable
audio cable
DTV
DIGITAL
AUDIO
COAXIAL IN
DIGITAL
AUDIO
OUT
COAXIAL
Your TV
Your device
digital audio
coaxial cable
2.A'0HO2CIG/QPFC[,WPG#/
EN
7
PC Connection
Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an
AC outlet after all the necessary connections are
completed.
Initial Setup
This section will guide you through the unit's initial setting
which includes selecting a language for your on-screen
menu and auto scan, which automatically scans and
memorises viewable channels.
1 After making all the necessary connections, turns on
the unit using the main power switch, then press .
2 Use Ÿ¬/¬ź repeatedly to select the menu language,
then press OK.
3 Use Ÿ¬/¬ź to select the location, then press OK.
4 Use Ÿ¬/¬ź repeatedly to select the country, then
press OK.
5 When below display appear, then use Ÿ¬/¬ź to
select [Scan] and press OK to start scanning.
The following signals can be displayed.
Other formats or non-standard signals will not be displayed
correctly.
Please use the VGA cable that has a ferrite core.
PC-INRGB
AUDIO
LINE OUT
PC-IN
AUDIO
Your TV
Your device
VGA cable with
ferrite core
Mini-plug audio cable
Format Resolution Refresh rate
VGA 640 x 480
60 Hz
SVGA 800 x 600
XGA 1,024 x 768
WXGA 1,360 x 768
WXGA+ 1,440 x 900
SXGA 1,280 x 1,024
SXGA+ 1,400 x 1,050
WSXGA+ 1,680 x 1,050
HDTV 1,920 x 1,080
Your TV
AC outlet
Select [at Home], this unit is set to maximise the energy
efficiency for home setting and it can be adjusted through a
choice of picture and sound quality according to your
preference.
Select [Retailstore], this unit will be set up with predefined
setting for retail displays. If you select [Retailstore], the settings
of picture and sound quality you adjusted will not be
memorised after the unit goes to the standby mode.
When “Initial Setup” (p. 7) is completed, you cannot change the
location setting unless you restore this unit to “Factory Reset”
(p. 22) and that restarts all over again such as channel scanning.
Scan confirmation menu will appear.
You can also set regions at “Region” (p. 19), when you select
[Spain] or [Portugal].
If you press MENU during channel scanning, this operation will
be paused, then press MENU again to exit the initial setup.
English
Ελληνικά
Eesti
Deutsch
Dansk
Česky
Български
Please select your language.
Select Exit
Initial Setup
Initial Setup
Language
Language
ExitSelectBack OK Exit
First, please connect antenna.
Start channel scan now?
If you skip this step, the channel
scan could be performed in Menu.
Scan
Skip
Initial Setup
Initial Setup
Auto Scan
Auto Scan
2.A'0HO2CIG/QPFC[,WPG#/
EN
8
OPERATIONS
Watching a TV Programme
To select a channel
Use / repeatedly to select your desired channel,
or use the Number buttons to enter a channel number,
then press OK for quicker access.
(e.g.) If you want to select the channel 24 without pressing
OK, press 2 first, then press 4 within 3 seconds.
To adjust the volume
Use +/– to adjust the audio volume.
Press to turn on or off the sound right away.
Channel List
You can easily find a channel you want.
1 Press OK while watching a programme.
2 Use Ÿ¬/¬ź to select the channel you want to
watch, then press OK.
3 Press BACK to exit.
Sleep Timer
The sleep timer can be set the unit to go to the standby
mode after an incremental period of time.
1 Press SLEEP repeatedly to change the sleep time
period.
ECO Mode
When you set [ECO Mode] to [On], backlight brightness
will be reduced automatically which may save on power
consumption.
Press
ECO repeatedly to select [On] or [Off].
Sound Select
Press AUDIO to display currently selected audio language
with the number of available ones and press repeatedly to
cycle through them.
Press AUDIO to display currently selected audio mode
and press repeatedly to cycle through the available audio
mode.
(e.g.)
Read this first
These operations are accessible by remote control. Some
may also be accessible by controls on the main unit.
You can recover the original volume by pressing again or
+/–.
1
Radio Channel
2
Analogue Channel
Use RED / GREEN to move to the previous or next page.
You can edit the channel list at “Channel Settings” (p. 17).
Prev Page Next Page
Channel List
Channel List
Each time you press SLEEP, the timer increases from
10 minutes up to 120 minutes.
Press SLEEP repeatedly until [Off] appears to cancel the sleep
timer.
If the unit goes into standby mode, the sleep timer will be
cancelled.
On The illuminance sensor senses the brightness of
the environment and, darkens the backlight
automatically when the room gets dark.
Off The illuminance sensor is not effect, and the
backlight level gets back the value you adjusted.
The display image can be found on the “TV Screen Information”
(p. 9).
Dolby Digital sound
Dolby Digital Plus sound
HE-AAC sound
no icon MPEG sound
Nicam Stereo Mono
Nicam Mono Mono
Stereo Mono
Dual1 Dual2
Mono
DTV
ATV
Nicam
Dual1
Nicam
Dual2
Mono
2.A'0HO2CIG/QPFC[,WPG#/
EN
9
TV Screen Information
You can see the broadcasting information.
1 Press to display fewer information and press again
more information will appear.
2 Press BACK to exit.
EPG (Electronic Programme Guide)
You can easily find a channel or see the detailed channel
information. EPG gives you scheduled information of the
TV programmes.
1 Press GUIDE and use Ÿ¬/¬ź to select a channel.
2 Press Ź (cursor), then use Ÿ¬/¬ź to select a
programme.
3 Press YELLOW to display more detailed
programme information.
4 Press GUIDE to exit.
Switching the Input Mode
1 Channel name
2
Present programme name /
time
Use Ż¬/¬Ź to switch the
present and next programme. (if
available)
3 Current time
4 Channel number
5 Resolution / Format / TV aspect ratio
6 Audio language (DTV) / Audio Mode (ATV)
7 Audio mode (DTV)
8 Subtitle (p. 19)
is displayed if the subtitle of
the TV programme is available.
is displayed if the subtitle of
the TV programme is for hearing
impaired.
9 Programme information When the programme
information consists of more
than 3 lines, use Ÿ¬/¬ź to scroll.
10 Audio Description (p. 17)
is displayed when the TV
programme provides additional
audio description for visually
impaired.
11 Teletext (p. 20)
is displayed if the teletext of
TV programme is available.
12 Scrambled programme
is displayed, when you are
watching the scrambled
programme.
13 Parental rating (p. 21)
is displayed if the parental
rating of TV programme is
available.
* The icon may differ depending
on the ratings.
14 Lock status (p. 21)
is displayed when you are
watching the TV programme
which you set the parental lock
or channel lock.
15 ATV broadcast
is displayed when it receives
analogue TV broadcast.
DTV broadcast
is displayed when it receives
digital TV broadcast.
Radio service
is displayed when it receives
digital audio broadcast.
English
English
Dual 1
Press RED or GREEN to move the channel list to the
previous or next page.
Press OK to watch the selected channel.
Press RED or GREEN to move the programme list to the
previous or next day.
Press OK to watch the selected programme if it is
currently available.
When the programme information consists of more than
2 pages, use RED or GREEN to move to the previous or
next page.
You can switch the input mode to
TV mode or external input mode.
1 Press SOURCE .
2 Use Ÿ¬/¬ź to select the
input mode you want, then
press OK.
[COMPONENT] will be displayed if you connected
component video cables to this unit.
DTV
Prev Page Next Page
Music
Programme Guide
Programme Guide
Viewing date:
Current time:
Tue TueFeb Feb
Select Input
Select Input
TV
SCART
VIDEO
HDMI 1
HDMI 2
HDMI 3
PC
USB
2.A'0HO2CIG/QPFC[,WPG#/
EN
10
Photo / Music / Video Playback
This unit can play JPEG picture and MP3 / WAVE music
and DivX® video files. Use the USB flash memory contains
those files.
Before you begin: You must insert the USB flash memory to
USB terminal of this unit (shown below) and select [USB] at
[Select Input]. Refer to “Switching the Input Mode” (p. 9).
1 Press SOURCE to appear the select input mode
and use Ÿ¬/¬ź to select [USB], and then press OK.
2 Use Ż¬/¬Ź to select [Photo], [Music] or [Video],
and then press OK.
3 Press GUIDE to toggle between the play list and the
thumbnail to select the desired display method.
4 In the play list, use Ÿ¬/¬ź to select the desired file,
then press OK or Ź (cursor).
In the thumbnail, use Ÿ¬/¬ź¬/¬Ż¬/¬Ź to select the
desired file, then press OK.
Operation in List and Thumbnail view
Before adjust each setting, press MENU to display the
menu.
Photo
Operation in Slideshow
The USB flash memory is not supplied with this unit.
The unit recognise a USB flash memory only.
Do not use a USB hub and an extension cord between the USB
flash memory and the unit.
Always insert the USB flash memory to this unit directly.
We do not guarantee the all USB flash memory can be
supported on this unit.
Sort :
Use Ÿ¬/¬ź to select [Sort], and then press OK, then use
Ÿ¬/¬ź to select the sort order.
Media Type :
Use Ÿ¬/¬ź to select [Media Type], and then press OK,
then use Ÿ¬/¬ź to select the media type; [Photo] or
[Music].
Thumbnail Size :
Use Ÿ¬/¬ź to select [Thumbnail Size], and then press
OK, then use Ÿ¬/¬ź to select the thumbnail size; [Small],
[Middle] or [Large].
Display all files :
Use Ÿ¬/¬ź to select [Display all files], then press OK to
display all files.
All files may not be displayed even if you select [Display
all files] due to the amount of files / folders, the length
of their file / folder name or the capacities.
When you want to display each folder or file, select
[Display current folder files], and then press OK.
Your TV
The sort order: [Date] or [Name].
(PLAY) /
Press to play or pause the slideshow.
/
Press to skip forward the file.
Press to skip backward the file.
BACK
Press to go back to the previous screen.
Show details ( ) :
Press MENU and then use Ÿ¬/¬ź to select [Show
details], and press OK.
[Name], [Date], [Resolution], [Size] and [Next].
While the menu is not displayed, the first press to show
toolbar. The second press to show details.
The third press to remove the details.
Repeat (RED) :
Press MENU and then use Ÿ¬/¬ź to select [Repeat], and
press OK, then use Ÿ¬/¬ź to select the repeat mode;
none or all repeat, and then press OK.
While the menu is not displayed, press RED to change
the repeat mode in order.
Shuffle (BLUE) :
Press MENU and then use Ÿ¬/¬ź to select [Shuffle], and
press OK then use Ÿ¬/¬ź to select the shuffle mode; on
or off, and then press OK.
While the menu is not displayed, press BLUE to playback
the slideshow randomly. To return to the normal
playback, press BLUE again.
Media Type
Sort
Thumbnail Size
Display all files
Photo
Select Menu BackPlay/Enter
2.A'0HO2CIG/QPFC[,WPG#/
EN
11
Playing Operation
Pausing Operation
Music
Operation in Playback
Transition (GREEN) :
Press MENU and then use Ÿ¬/¬ź to select [Transition],
and press OK, then use Ÿ¬/¬ź to select the way of
transition mode below, and then press OK.
[None], [Dissolve], [Wipe right], [Wipe left], [Wipe
up], [Wipe down], [Box in], [Box out] and [Random].
While the menu is not displayed, press GREEN
repeatedly to change transition of the slideshow in order.
Slide time (YELLOW) :
Press MENU and then use Ÿ¬/¬ź to select [Slide time],
and press OK, then use Ÿ¬/¬ź to select the display time
below, and then press OK.
[7 seconds], [12 seconds] and [16 seconds].
While the menu is not displayed, press YELLOW to
change the slide time in order.
Rotate (GREEN) :
Press MENU and then use Ÿ¬/¬ź to select [Rotate], and
then press OK. And then every press on OK will turn the
picture clockwise by 90 degrees.
While the menu is not displayed, every press on GREEN
will turn the picture clockwise by 90 degrees.
Zoom (YELLOW) :
Press MENU and then use Ÿ¬/¬ź to select [Zoom], and
then press OK, then use Ÿ¬/¬ź to select the zoom
factor:
1x, 2x and 4x, and then press OK.
While the menu is not displayed, press YELLOW to
change the zoom factor in order.
The sort order: [Name], [Genre], [Artist] or [Album].
Music
Select Menu BackPlay/Pause
Title:
Artist:
Album:
Genre:
Year:
Duration:
Next:
(PLAY) /
Press to play or pause the playback.
/
Press to skip backward or forward the file.
/
works same function as .
works same function as .
Ż¬/¬Ź (cursor)
While holding Ź, fast-forward the file.
While holding Ż, rewind the file.
/
Press to rewind or fast-forward the file.
Every press on / will rewind or fast-forward
faster up to five.
Repeat (GREEN) :
Press MENU and use Ÿ¬/¬ź to select [Repeat], then
press OK. Use Ÿ¬/¬ź to select the following repeat
mode; [None], [Single] or [All], and press OK.
You can also set those repeat mode or none by pressing
GREEN while the menu is not displayed.
Shuffle (YELLOW) :
Press MENU and use Ÿ¬/¬ź to select [Shuffle On] or
[Shuffle Off] then, press OK to determine the shuffle
mode on or off.
You can also set the shuffle mode on or off by pressing
YELLOW while the menu is not displayed.
Show details ( ) :
Press MENU and use Ÿ¬/¬ź to select [Show details],
then press OK.
[Title], [Artist], [Album], [Genre], [Year], [Duration]
and [Next]
.
You can also call up or turn off the details by pressing
while the menu is not displayed.
Audio only :
Press MENU and use Ÿ¬/¬ź to select [Audio only], to
be undisplayed all informations.
Press any button (except ) to return the normal
display.
2.A'0HO2CIG/QPFC[,WPG#/
EN
12
Video
Operation in Playback
5 Press SOURCE and select input mode you want
to exit this mode.
The sort order: [Type], [Date] or [Name].
(PLAY) /
Press to play or pause the playback.
Press to stop the playback, and then press to resume
from the point at which playback was stopped, or press
again to finish the playback.
/
Press to skip backward or forward the file.
/
works same function as .
works same function as .
/
Press to rewind or fast-forward the file.
Every press on / will rewind or fast-forward
faster up to five.
(subtitle)
Press to change the subtitle track.
This operation is available, if the file contains subtitle
track.
Off
Video
Select Menu BackPlay/Pause
Title:
Director:
Copyright:
Date:
Genre:
Duration:
Next:
AUDIO
Press to change the audio track.
This operation is available, if the file contains more than
one audio track.
Repeat :
Press MENU and use Ÿ¬/¬ź to select [Repeat], then
press OK. Use Ÿ¬/¬ź to select the following repeat
mode; [None], [Single] or [All], and press OK.
Show details ( ) :
Press MENU and use Ÿ¬/¬ź to select [Show details],
then press OK.
[Title], [Director], [Copyright], [Date], [Genre],
[Duration] and [Next].
You can also call up or turn off the details by pressing
while the menu is not displayed.
Picture Mode :
Press MENU and use Ÿ¬/¬ź to select [Picture Mode]
then press OK. Use Ÿ¬/¬ź to select the following
picture mode, and press OK.
[Standard], [Dynamic], [Movie] and [Game].
PICTURE MODE on the remote control does not
work in this mode.
Screen Mode :
Press MENU and use Ÿ¬/¬ź to select [Screen Mode],
then press OK. Use Ÿ¬/¬ź to select the following screen
mode; [Normal] or [Dot by Dot], and press OK.
These screen mode are described as PC input signal at
“Changing the TV Screen Display Mode” (p. 14).
ASPECT on the remote control does not work in
this mode.
2.A'0HO2CIG/QPFC[,WPG#/
EN
13
Funai can not be held responsible if your USB flash memory is
not supported, nor will Funai accept any liability for damage or
loss of stored data.
A USB flash memory that required its own driver or the device
with a special system such as fingerprint recognition are not
supported.
Be sure to keep a backup copy of the original files on your
device before you play them back on this unit. We have no
responsibilities for damage or loss of your stored data.
To avoid damaging the USB flash memory and the unit always
turn off the unit before you remove the USB flash memory.
This unit is not allowed to use the USB flash memory which
requires external power supply (500 mA or more).
This unit can be recognised up to 3,000 files in the USB flash
memory.
This unit may not be recognised if the length of the file names
is too long. Only English characters can be recognised.
This unit does not support MTP(Media Transfer Protocol) or
the file other than FAT, FAT32 and NTFS file system. If the file
is not supported, error message appears.
When the unit does not recognise the USB flash memory, try
reconnecting it.
When playing back the files recorded in high bit rates, the
images can be interrupted in some occasions.
The resume information will be kept until finish the playback
definitely.
This unit does not support external subtitle.
This unit cannot play back a file which go over the limit of file
restriction.
This unit can play back the bought-out file with the registration
code of this unit only.
A DivX® file with an extension of “.avi” and “.divx” is only
supported.
Although DivX® logo has been obtained for this unit, it may
not be able to play back some data, depending on the
characteristics, bit rates, or audio format settings, etc.
If a large-sized DivX® file is selected, it may take a while to start
the playback (over 20 seconds sometimes).
For more information for DivX®, please visit
http://www.divx.com.
ABOUT DIVX VIDEO: DivX® is a digital video format created
by DivX, LLC. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and
software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®
device must be registered in order to play purchased DivX
Video on-Demand (VOD) movies. To obtain your registration
code, locate the DivX VOD section in your device setup menu.
Go to vod.divx.com for more information on how to complete
your registration.
Official DivX® Certified product; Plays only DivX® 3, 4, 5 and
6 versions with standard playback of DivX® media files.
USB flash memory containing the DivX® files with the DivX®
GMC (Global Motion Compensation) playback feature, which
is DivX® supplemental function, cannot be played back on this
unit.
It is supported that files to be played back in this unit are
recorded under the following specifications:
<JPEG>
Baseline 17,000 x 10,000
Progressive 4,000 x 4,000
<MP3>
Sampling frequency 32 kHz, 44.1 kHz or 48 kHz
16 kHz, 22.05 kHz or 24 kHz
8 kHz, 11.025 kHz or 12 kHz
Constant bit rate 32 kbps - 320 kbps
<WAVE>
Sampling frequency 32 kHz, 44.1 kHz or 48 kHz
Constant bit rate
16 bit PCM (big / little endian),
24 bit PCM (big endian)
<DivX®>
Resolution Up to 1,920 x 1,080
Constant bit rate 16 kbps - 320 kbps
(MPEG audio)
32 kbps - 448 kbps
(AC3 audio)
Sampling frequency 16 kHz - 48 kHz
Channel type 1-channel / mono
2-channel / stereo
6-channel / surround
Internal subtitle type XSUB, XSUB+
2.A'0HO2CIG/QPFC[,WPG#/
EN
14
Changing the TV Screen Display Mode
You can select your favourite TV screen size. Press ASPECT repeatedly to switch the TV screen display mode.
For 16:9 video signal
For 4:3 video signal
For PC input signal
[Auto] Selects the TV screen display mode automatically.
[4:3] Displays a 16:9 picture at a 4:3 size; the picture is shortened
horizontally. Sidebars appear on both edge of the TV screen.
[Full] Displays a 16:9 picture that is stretched horizontally and
vertically.
[Zoom] Displays a 16:9 picture at its enlarged size without changing its
horizontal and vertical ratio.
[Cinema] Displays a 16:9 picture that is vertically stretched. This only
crops out the top of the picture.
[Expand] Displays a horizontally stretched picture. This crops out the left
and right sides of the picture.
[Unscaled] Displays a 16:9 picture at its original size.
You can set [Unscaled] in HD picture mode. (720p / 1080i / 1080p)
[Auto] Selects the TV screen display mode automatically.
[4:3] Displays a 4:3 picture at its original size. Sidebars appear on both
edge of the TV screen.
[14:9] Displays a 4:3 picture at a 14:9 size. Sidebars appear on both
edge of the TV screen. This crops out the top and bottom of
the picture.
[Full] Displays a 4:3 picture at a 16:9 size; the picture is stretched
horizontally to fill the TV screen.
[Zoom] Displays a 4:3 picture at a 16:9 size; at its enlarged size without
changing its horizontal and vertical ratio. This crops out the top
and bottom of the picture.
[Cinema] Displays a 4:3 picture at a 16:9 size; the picture is stretched
more vertically at the top of the TV screen. This crops out the
top of the picture.
[Wide] Displays the picture with its centre at the original size and the
edges stretched horizontally to fill the screen.
Auto
Full
Cinema
Unscaled
4:3
Zoom
Expand
Auto
14:9
Zoom
Wide
4:3
Full
Cinema
[Normal] Displays a proportionally stretched picture. Mainly sidebars
appear on both edges of the TV screen.
[Full] Displays the picture with its centre at the original size and the
edges stretched horizontally to fill the screen.
[Dot by Dot] Displays a picture at its original size.
Normal
Dot by Dot
Full
2.A'0HO2CIG/QPFC[,WPG#/
EN
15
OTHER SETTINGS
Press MENU and no input for 1 minute, then the menu
disappears automatically.
Picture Adjustment
You can adjust the picture settings according to your
personal preference. These settings are automatically
stored after exiting the picture menu.
1 Use Ÿ¬/¬ź to select [Picture], then press OK.
Picture Mode
2 Use Ÿ¬/¬ź to select [Picture Mode], then select
[Standard], [Dynamic], [Movie], [Game] or
[Personal] using Ż¬/¬Ź.
Brightness / Contrast / Colour / Hue / Sharpness
2 Use Ÿ¬/¬ź to select the item you want, and then or
after Press OK to appear the setting display, adjust
the setting using Ż¬/¬Ź.
100Hz
When the picture is blurred while viewing fast moving
scenes may be corrected using the 100Hz (100 frames per
second) resolution feature.
2 Use Ÿ¬/¬ź to select [100Hz] and then select [On]
or [Off] using Ż¬/¬Ź.
Colour Temperature
You can change the colour tone of the picture.
2 Use Ÿ¬/¬ź to select [Colour Temperature] and
then select [Warm], [Normal] or [Cool] using Ż¬/
¬Ź.
Advanced Picture Adjustment
You can adjust the detailed picture settings according to
your personal preference.
1 Use Ÿ¬/¬ź to select [Picture], then press OK.
2 Use Ÿ¬/¬ź to select [Features], then press OK.
DNR (Digital Noise Reduction)
You can adjust to reduce the appearance of digitizing error
caused by the compression.
3 Use Ÿ¬/¬ź to select [DNR] and then select [Mid],
[High] or [Low] using Ż¬/¬Ź.
CTI (Colour Transient Intensity)
You can adjust the picture for colour errors.
3 Use Ÿ¬/¬ź to select [CTI] and then select [Mid],
[High] or [Low] using Ż¬/¬Ź.
Flesh Tone
You can set to activate the flesh colour or not.
3 Use Ÿ¬/¬ź to select [Flesh Tone] and then select
[On] or [Off] using Ż¬/¬Ź.
Adaptive Luma Control
You can adjust changes in the luminance of the picture.
3 Use Ÿ¬/¬ź to select [Adaptive Luma Control] and
then select [On] or [Off] using Ż¬/¬Ź.
Backlight
You can adjust backlight brightness.
3 Use Ÿ¬/¬ź to select [Backlight] and then adjust the
setting using Ż¬/¬Ź.
Read this first
Before adjust each setting, press MENU to display the
menu.
To exit the menu, press MENU.
You can change picture mode easily using PICTURE MODE.
Press PICTURE MODE repeatedly to select picture mode you
want. In this function, you can set also assign the picture mode
individually to each input mode.
If you adjust the settings in other than [Personal] mode,
[Picture Mode] will be changed to [Personal].
When you set [Game] in [Picture Mode], the function will not
effect.
Picture Select Back
Picture
Sound
TV
Others
Parental
Picture Mode Dynamic
On
Brightness
Contrast
Colour
Hue
Sharpness
100Hz
Cool
Colour Temperature
Features
After press OK and appear the setting display, you can adjust it.
When you set [ECO Mode] to [On] at “ECO Mode” (p. 8),
this function will not work even if you adjust the setting due to
the ECO Mode has priority.
Picture
Sound
TV
Others
Parental
DNR
CTI
Flesh Tone
Adaptive Luma Control
Mid
Mid
On
On
Backlight
Features Select Back
2.A'0HO2CIG/QPFC[,WPG#/
EN
16
PC Settings
You can adjust the PC screen position, clock and phase.
Before you begin: You must connect your PC to this unit
and select [PC] at [Select Input].
Refer to “Switching the Input Mode” (p. 9).
1 Use Ÿ¬/¬ź to select [Picture], then press OK.
2 Use Ÿ¬/¬ź to select [PC Settings], then press OK.
Auto Adjustment
3 Use Ÿ¬/¬ź to select [Auto Adjustment], then press
OK.
Horizontal Position / Vertical Position / Phase / Clock
3 Use Ÿ¬/¬ź to select the item you want, then adjust
the settings according to your personal preference.
Sound Adjustment
You can adjust the sound settings according to your
personal preferences.
1 Use Ÿ¬/¬ź to select [Sound], then press OK.
Balance / Bass / Treble
You can set left / right speaker setting.
2 Use Ÿ¬/¬ź to select the item you want, and then
adjust the setting using Ż¬/¬Ź.
SRS TruSurround HD
You can set to the sound modes for more spatial or
surround sound reproduction.
2 Use Ÿ¬/¬ź to select [SRS TruSurround HD] and
then select [On] or [Off] using Ż¬/¬Ź.
Sound Mode
2 Use Ÿ¬/¬ź to select [Sound Mode] and then select
[Standard], [Movie], [Music] or [Game] using Ż¬/
¬Ź.
Digital Audio Output
2 Use Ÿ¬/¬ź to select [Digital Audio Output] and
then select [Auto] or [PCM] using Ż¬/¬Ź.
Auto Volume Control
If set to [On], sudden changes in volume will be reduced
automatically, for example, during commercials or when
switching channels.
2 Use Ÿ¬/¬ź to select [Auto Volume Control], and
then select [On] or [Off] using Ż¬/¬Ź.
TV Speakers
Select the audio output from the unit’s speakers, or not. If
your amplifier is HDMI link function compatible and
connected by an HDMI cable to this unit, some sound
operations such as volume up can be changed by using this
unit’s remote control. Make sure [fun-Link Control] is set
to [On] (p. 22).
2 Use Ÿ¬/¬ź to select [TV Speakers], then select
[On], [Off] or [Ext.Amp] using Ż¬/¬Ź.
Each setting will be adjusted automatically.
After press OK and appear the settings display, you can adjust
them.
You can select your favourite PC screen size at “Changing the
TV Screen Display Mode” (p. 14).
PC Settings
Select
OK
Back
Horizontal Position
Auto Adjustment
Vertical Position
Phase
Clock
Picture
Sound
Others
Parental
TV
Others
Parental
Balance
Bass
Treble
SRS TruSurround HD
Sound Mode
Digital Audio Output
Auto Volume Control
TV Speakers
Audio Type
Audio Description
Off
Standard
PCM
Off
On
Sound
Select
Adjust
Back
Picture
Sound
You can change sound mode easily using SOUND MODE.
Press SOUND MODE repeatedly to select sound mode you
want.
Auto Dolby Digital (if available)
PCM PCM
On The sound will be output from the unit’s
speakers.
Off The sound will not be output from the unit’s
speakers.
Ext.Amp You can control audio output from your
connected HDMI link devices by using this
unit’s remote control.
2.A'0HO2CIG/QPFC[,WPG#/
EN
17
Audio Type
You can adjust the audio type.
2 Use Ÿ¬/¬ź to select [Audio Type], and then select
[-], [Hearing Impaired] or [Visually Impaired] using
Ż¬/¬Ź.
Hearing Impaired:
Provides audio service for hearing impaired.
Visually Impaired:
Provides additional audio description for visually impaired.
Audio Description
You can adjust audio output setting and volume for
[Visually Impaired].
2 After select [Visually Impaired], use Ÿ¬/¬ź to
select [Audio Description], and then select adjust
the setting using Ż¬/¬Ź.
TV Settings
You can select the country and audio language.
1 Use Ÿ¬/¬ź to select [TV], then press OK.
Country
You can set the country you want.
2 Use Ÿ¬/¬ź to select [Country], and then select the
country you want using Ż¬/¬Ź.
Main Audio Language / Sub Audio Language
You can select the main or sub audio language.
2 Use Ÿ¬/¬ź to select [Main Audio Language] or
[Sub Audio Language], and then select each
language you want using Ż¬/¬Ź.
Audio Channel
You can select the audio mode.
2 Use Ÿ¬/¬ź to select [Audio Channel], and then
select [Stereo], [Mono], [Dual 1] or [Dual 2] using
Ż¬/¬Ź.
Channel Settings
You can edit the channels.
1 Use Ÿ¬/¬ź to select [TV], then press OK.
2 Use Ÿ¬/¬ź to select [Channel], then press OK.
Auto Scan
You can scan the DTV and ATV channel in your area
automatically.
3 Use Ÿ¬/¬ź to select [Auto Scan] and then press
OK to start scanning.
Manual Scan (ATV)
You can search ATV channel manually in your area.
3 Use Ÿ¬/¬ź to select [Manual Scan (ATV)], then
press OK.
4 Use Ÿ¬/¬ź to select [Start Frequency (MHz)] for
section of the 3-digit frequency using the Number
buttons.
5 Use Ÿ¬/¬ź to select [Scan Up] or [Scan Down],
then press OK to start scanning greater than or less
than the adjusted frequency.
After OK and appear the mixing level display, you can adjust it.
Only MPEG sound is available for this function.
Country
France
English
English
Main Audio Language
Sub Audio Language
Channel
Picture
Sound
TV
Others
Parental
TV
Select Back
DTV
While watching a programme, you can change the audio
language easily using AUDIO when it is available.
When the scanning is completed, the lowest memorised digital
or analogue channel will be displayed.
If you press MENU during the scanning, this operation will be
stopped and the lowest memorised channel will be displayed.
Please note that after tuning, the analogue channels will be
stored in the order that they are broadcast by your local
transmitter. This may not be in the same order in which you
would like them to be stored. If this is the case, you can change
the order according to your preference at “Channel Settings”
(p. 17).
ATV
Auto Scan
Manual Scan (ATV)
Manual Scan (DTV)
Update Scan
Channel Skip
Channel Sort
Channel Edit
Channel Decode
Fine Tune
Channel
Select
Search
Back
Picture
Sound
TV
Others
Parental
2.A'0HO2CIG/QPFC[,WPG#/
EN
18
Manual Scan (DTV)
You can search DTV channel manually in your area.
3 Use Ÿ¬/¬ź to select [Manual Scan (DTV)], then
press OK.
4 Use Ż¬/¬Ź to select [Channel Number], and then
press OK to start scanning.
Update Scan
Search and register unreceived ATV and DTV channels.
3 Use Ÿ¬/¬ź to select [Update Scan], then press OK.
Channel Skip
When using / , the channel you selected will be
skipped.
3 Use Ÿ¬/¬ź to select [Channel Skip], then press
OK.
4 Use Ÿ¬/¬ź to select channel you want, then press
OK.
Channel Sort
3 Use Ÿ¬/¬ź to select [Channel Sort], then press
OK.
4 Use Ÿ¬/¬ź to select channel you want and press
OK to determine, then select another one and
press OK to change the order.
Channel Edit
You can set the channel number and name.
3 Use Ÿ¬/¬ź to select [Channel Edit], then press
OK.
4 Use Ÿ¬/¬ź to select channel you want, then press
OK.
5 Use Ÿ¬/¬ź to select [Channel Number] and enter
the number you want using the Number buttons,
then press OK.
6 Use Ÿ¬/¬ź to select [Name] and enter the
character using the Number buttons, then press
OK.
7 Use Ÿ¬/¬ź to select [Frequency¬(MHz)] and enter
frequency you want using the Number buttons,
then press OK.
8 Use Ÿ¬/¬ź to select [Colour System] or [Sound
System], and then select the system you want using
Ż¬/¬Ź.
Channel Decode
Some TV stations transmit encoded TV signals which can
only be viewed with a purchased or hired decoder. You
can connect such a decoder to SCART jack of the unit.
This function will automatically activate the connected
decoder for the channel.
3 Use Ÿ¬/¬ź to select [Channel Decode], then press
OK.
4 Use Ÿ¬/¬ź to select channel you want, then press
OK.
Fine Tune
3 Use Ÿ¬/¬ź to select [Fine Tune], then press OK.
4 Use Ÿ¬/¬ź to select the channel you want, then
press OK.
5 Use Ż¬/¬Ź to adjust the setting you want, then
press OK.
will appear on the right of the channel.
Press OK again to cancel, and will disappear.
Using alphabet by the Number buttons, correspondence table
shown below.
Using Ż to erase 1 character.
Press OK again to cancel, and will disappear.
ATV
ATV
ATV
2.A'0HO2CIG/QPFC[,WPG#/
EN
19
Setup Adjustment
You can change other setting.
Menu Language
1 Use Ÿ¬/¬ź to select [Others], then press OK.
2 Use Ÿ¬/¬ź to select [Menu Language], then press
OK.
Time Setup
1 Use Ÿ¬/¬ź to select [Others], then press OK.
2 Use Ÿ¬/¬ź to select [Time Setup], then press OK.
Time Zone
You can set the time zone according to the resident area.
3 Use Ÿ¬/¬ź to select [Time Zone], and then select
[Auto] or the time you want using Ż¬/¬Ź.
Region
In Spain or Portugal, you can select region where you live.
3 Use Ÿ¬/¬ź to select [Region], and choose the
region you want using Ż¬/¬Ź.
Auto Power Off
You can set the unit to go into standby mode automatically
if no activity is detected after the power is turned on for 4
hours.
In spite of this setting, the unit goes into standby mode
automatically if there is no signal input from the antenna
terminal and no user operation for 15 minutes.
3 Use Ÿ¬/¬ź to select [Auto Power Off], and then
select [On] or [Off] using Ż¬/¬Ź.
Subtitle Settings
You can change the subtitle settings used for TV
programmes.
1 Use Ÿ¬/¬ź to select [Others], then press OK.
2 Use Ÿ¬/¬ź to select [Subtitle], then press OK.
Subtitle (ATV)
3 Use Ÿ¬/¬ź to select [Subtitle (ATV)], and then
select [Muting], [On] or [Off] using Ż¬/¬Ź.
1st Subtitle Language / 2nd Subtitle Language
You can set 1st and 2nd subtitle language.
3 Use Ÿ¬/¬ź to select [1st Subtitle Language] or
[2nd Subtitle Language], and then select the
language you want using Ż¬/¬Ź.
Subtitle Type
You can select the preferred subtitle type.
3 Use Ÿ¬/¬ź to select [Subtitle Type], and choose [-]
or [Hearing Impaired] using Ż¬/¬Ź.
Auto : Automatically selects the time zone of your
area to ensure the proper performance of the
time.
Although you select [Auto], the correct time may not be
displayed on the “TV Screen Information” (p. 9) depending on
DTV broadcasting.
Menu Language English
Time Setup
Subtitle
Teletext
Common Interface
DivX(R) VOD
Software
Demo
Reset
Sound
TV
Parental
Picture
Others
Others
Select Back
While watching a programme, you can change the subtitle
language easily using when it is available.
To hide the subtitle, select [Off] in [1st Subtitle Language].
Hearing Impaired : Provides subtitle commentary for
hearing impaired.
Sound
TV
Parental
Picture
Others
Subtitle Select Back
Subtitle (ATV)
1st Subtitle Language
2nd Subtitle Language
Subtitle Type
Off
English
English
2.A'0HO2CIG/QPFC[,WPG#/
EN
20
Teletext
You can change the teletext settings.
1 Use Ÿ¬/¬ź to select [Others], then press OK.
2 Use Ÿ¬/¬ź to select [Teletext], then press OK.
Teletext Language
You can select the preferred teletext language.
3 Use Ÿ¬/¬ź to select [Teletext Language], then
select the language you want using Ż¬/¬Ź.
Decoding Page Language
You can switch to the appropriate language group.
3 Use Ÿ¬/¬ź to select [Decoding Page Language],
then select the language area you want using Ż¬/
¬Ź.
Presentation Level
You can adjust the teletext presentation level. Level 2.5
offers more colours and better graphics than Level 1.5.
3 Use Ÿ¬/¬ź to select [Presentation Level], then
select [Level 1.5] or [Level 2.5] using Ż¬/¬Ź.
To show the teletext
1 Press to turn on the teletext decoder.
2 Press repeatedly to show the teletext in
transparent mode or picture and teletext mode.
3 Press BACK to turn off the teletext decoder.
Common Interface (CI)
This unit is equipped with a CI slot. You can enjoy
additional services with this function, for example Pay TV.
The access restrictions menu will appear on the TV screen
when a CI module is installed.
1 Go into standby mode and unplug from an AC
outlet.
2 Insert the CI module straight to the CI slot of this
unit.
3 Plug this unit into an AC outlet and press to turn
on the unit.
4 Press MENU to display the menu.
5 Use Ÿ¬/¬ź to select [Others], then press OK.
6 Use Ÿ¬/¬ź to select [Common Interface], then
press OK.
7 Follow the instructions on the TV screen.
DivX® VOD
When you purchase or rent a DivX® file through the
official site of DivX® video which is called DivX® VOD
(Video-On-Demand) services, a registration code is
required every time you get the new file from the DivX®
VOD services.
1 Use Ÿ¬/¬ź to select [Others], then press OK.
2 Use Ÿ¬/¬ź to select [DivX(R) VOD], then press
OK.
DivX(R) Registration
You can set the registration of DivX® VOD code to this
unit.
3 Use Ÿ¬/¬ź to select [DivX(R) Registration], then
press OK.
DivX(R) Deactivation
You can deactivate registration code of this unit and get
new registration code and deactivation code in order to
download the DivX® VOD files from the Internet.
3 Use Ÿ¬/¬ź to select [DivX(R) Deactivation], then
press OK and, if a confirmation message appears,
select and press OK.
You must select [RUSSIA] if you select the countries that use
the Cyrillic alphabet at “Country” (p. 17).
[Teletext] information will appear.
If you want to select other pages, use the Number buttons or
Ÿ¬/¬ź.
To enlarge fonts, press .
To select the teletext subpages, press .
To directly select the page numbers shown at the bottom of
the TV screen, use RED / GREEN / YELLOW / BLUE.
To call up the hidden information, press .
To hold the current page, press .
To go back to the start page, press .
To hide the teletext, press SLEEP.
Sound
TV
Parental
Picture
Others
Teletext
Select Back
Teletext Language
Decoding Page Language
Presentation Level
English
WEST EUR
Level 2.5
Some CI modules may be a two-piece design consisting of a
card reader with the viewing card. When using this kind of card,
insert the card reader firmly into the CI slot on the unit first.
Then, insert the viewing card into the reader.
CI may not available in some countries or region.
In case of failure, you need to call your CI service provider.
Menu operations may vary depending on the viewing card.
Refer to the manual accompanying the viewing card.
During the DivX® playback, you can not enter this setting.
DTV
2.A'0HO2CIG/QPFC[,WPG#/
EN
21
Software Download
Software download complies in specified countries only.
You may not use this function depending on where you
live.
1 Use Ÿ¬/¬ź to select [Others], then press OK.
2 Use Ÿ¬/¬ź to select [Software], then press OK.
Auto Update Search
When you set to [On], this unit into standby mode detects
and update a new version of software automatically.
3 Use Ÿ¬/¬ź to select [Auto Update Search], and
then select [On] or [Off] then using Ż¬/¬Ź.
Search for new software
You can search for new version of software in TV mode
only.
3 Use Ÿ¬/¬ź to select [Search for new software],
then press OK.
4 After the software update is completed, press to
restart this unit.
Demo
When you select [Location] to [Retailstore], you can
check and change demonstration settings.
E-pop
E-pop can be set to off or position you want in this
function.
1 Use Ÿ¬/¬ź to select [Others] by pressing OK, and
select [Demo], then press OK.
2 Use Ÿ¬/¬ź to select [E-pop], and then select [Top],
[Bottom] or [Off] using Ż¬/¬Ź.
100Hz Demo
You can check differences of between 50Hz and 100Hz
refresh rate with this demonstration mode.
1 Use Ÿ¬/¬ź to select [Others] by pressing OK, and
select [Demo], then press OK.
2 Use Ÿ¬/¬ź to select [100Hz Demo], and then
press OK.
Reset Default
Reset
You can restore the all settings except channel setting and
parental lock settings.
1 Use Ÿ¬/¬ź to select [Others] by pressing OK, and
select [Reset], then press OK.
2 Use Ż¬/¬Ź to select [OK], then press OK.
Parental Lock
You can proceed Parental setting, if you enter your PIN
code.
1 Use Ÿ¬/¬ź to select [Parental], then press OK.
2 Use the Number buttons t o e nt er the 4-digit
PIN Code you set.
Channel Lock
You can set particular channels to be invisible.
3 Use Ÿ¬/¬ź to select [Channel Lock], then press
OK.
4 Use Ÿ¬/¬ź to select the channel you want, then
press OK.
Maturity Rating
You can set the parental rating to avoid watching an
inappropriate programme for your children.
3 Use Ÿ¬/¬ź to select [Maturity Rating], then press
OK.
4 Use Ż¬/¬Ź to select the age restriction.
Power indicator lights up while the unit searches or updates the
software.
Software updating will start automatically.
When this unit found a new version of software, software
update confirmation menu will appear.
This process may take up to 60 minutes.
If you have not set up your PIN code, enter 1234.
When you enter correct PIN Code, settings display will appear
automatically.
When you select the locked channel, you need to enter the PIN
Code to watch.
If you want to unlock the locked channel, select [OK] by using
Ÿ¬/¬ź, then the PIN Code again.
will appear on the right of the channel.
Press OK again to cancel, and will disappear.
Picture
Sound
TV
Others
Parental
Parental
Select BackOK
Channel Lock
Maturity Rating
Change PIN Code
Factory Reset
2.A'0HO2CIG/QPFC[,WPG#/
EN
22
Change PIN Code
You can set your own PIN Code.
3 Use Ÿ¬/¬ź to select [Change PIN Code], then
press OK.
4 Use the Number buttons to enter the new 4-digit
number.
5 Use the Number buttons to enter the same 4-digit
number again.
Factory Reset
You can restore this unit to factory settings.
3 Use Ÿ¬/¬ź to select [Factory Reset], then press
OK.
4 Use Ż¬/¬Ź to select [OK], then press OK.
fun-Link
This function allows you to operate the linked functions
between our brand devices with a fun-Link feature and this
unit connecting through an HDMI cable.
1 Press to display the menu.
2 Use Ÿ¬/¬ź to select [Setup], then press OK.
fun-Link Control
You can set the fun-Link function On or Off.
3 Use Ÿ¬/¬ź to select [fun-Link Control], then
select [On] or [Off] by pressing OK.
Auto Device Off
You can set your device to turn off by interlocking from
this unit’s power.
3 Use Ÿ¬/¬ź to select [Auto Device Off], then
select [On] or [Off] by pressing OK.
Auto TV On
This unit will turn on detected when the power on signal
is sent from your connected fun-Link device.
3 Use Ÿ¬/¬ź to select [Auto TV On], then select
[On] or [Off] by pressing OK.
Device Control
You can operate some functions such as disc playback or
call up the menu of the connected devices, by using this
unit’s remote control.
3 Use Ÿ¬/¬ź to select [Device Control], then select
[On] or [Off] by pressing OK.
Device List Update
This function lets you see the product model number or
name of connected devices.
3 Use Ÿ¬/¬ź to select [Device List Update], then
press OK.
To show the menu of connected your devices
Make sure [fun-Link Control] and [Device Control] is set
to [On].
1 Press to display the menu.
2 Use Ÿ¬/¬ź to select device you want, then press
OK.
3 Use Ÿ¬/¬ź to select the item you want, then press
OK.
4 Use Ÿ¬/¬ź¬/¬Ż¬/¬Ź / OK on this unit’s remote
control to operate the desired functions for your
devices or discs.
All the settings are restored to the default even memorised
channels, picture settings, and sound settings.
The set with fun-Link will interoperate without any problems
with other Funai devices which comply with fun-Link.
On : Selects if you have connected an external device
that is compatible with the fun-Link function.
Off : Disables all fun-Link functions.
The following additional settings will be greyed out when you
set to [Off].
On : Your connected fun-Link device turns off
automatically when the unit goes into the
standby mode.
Off : Your connected fun-Link device stays on even if
the unit goes into the standby mode.
On : This unit turns on automatically when you turn on
your connected fun-Link device.
Off : This unit stays the standby mode even if you turn
on your connected fun-Link device.
On :
/ / / / / / /
/ Ÿ¬/¬ź¬/¬Ż¬/¬Ź / OK /
BACK / the Number buttons / RED / GREEN /
YELLOW / BLUE can be used to control your
connected fun-Link devices by this unit’s remote
control.
Off : Disables the device control.
Device - Menu : This function allows you to control
the menu of your connected fun-
Link device.
Device -
Contents
: This function allows you to control
the top menu of your DVD or Blu-
ray™ discs.
Device -
Favourite
: This function allows you to control
the pop-up menu of your Blu-ray™
discs.
Some of fun-Link functions may not be available depending on
your fun-Link devices or discs.
We do not guarantee 100 % interoperability with other brands
of HDMI link compliant devices.
2.A'0HO2CIG/QPFC[,WPG#/
EN
23
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often
overlooked possibilities.
Before arranging for service, check these items. It could save you time and money.
Problem
Possible Remedy
Remote Control Doesn’t Work
Is unit plugged in?
Power at outlet?
Check batteries in remote control.
Bars On TV Screen
If outside antenna is being used, check for broken wire.
Check for local interference.
Picture Distorted
Try a new channel, if OK, then possibly due to poor channel reception.
If outside antenna is being used, check for broken wire.
Surrounding temperature is too low.
Picture Rolls Vertically
Try a new channel, if OK, then possibly due to poor channel reception.
If outside antenna is being used, check for broken wire.
Check for local interference.
No Colour
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Adjust [Colour] control.
Poor Reception on Some Channels
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Check for local interference.
Weak Picture
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Adjust [Contrast] and [Brightness] control.
Surrounding temperature is too low.
Lines or Streaks in Picture
Try a new channel, if OK, then possibly due to poor channel reception.
If outside antenna is being used, check for broken wire.
Check for local interference.
Ghosts in picture
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Check for local interference.
Picture Blurred
Try a new channel, if OK, then possibly due to poor channel reception.
If outside antenna is being used, check for broken wire.
Sound OK, Picture Poor
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Check for local interference.
Adjust [Contrast] and [Brightness] control.
Picture OK, Sound Poor
Try a new channel, if OK, then possibly due to poor channel reception.
Check for local interference.
No Picture or Sound
Try a new channel, if OK, then possibly due to poor channel reception.
Is unit plugged in?
Power at outlet?
Is unit’s power on?
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Unplug the AC power cord and wait for about 1 minute, then plug the AC power
cord and turn on the unit again.
Different colour marks on TV screen
Try a new channel, if OK, then possibly due to poor channel reception.
Black or Luminous point on TV screen
It is quality of the LCD Panel.
Forget the PIN Code
Enter 4737, then set your desired password again.
2.A'0HO2CIG/QPFC[,WPG#/
EN
24
OTHER INFORMATIONS
Specifications
Trademark Information
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.
DVB is a registered trademark of the DVB Project.
The “HD TV 1080p” qualifier Logo is a trademark of
DIGITALEUROPE.
DivX®, DivX Certified® and associated logos are
trademarks of DivX, LLC. and are used under license.
Model LED40-H9825M
LCD
40 inches
Television system
DVB-T(MPEG2/H.264), PAL-B/G, D/K, SECAM-B/G, D/K, L
Terminals Antenna
UHF/VHF 75 ohm
Audio Input
RCA jack (L/R) x 2
Composite Video Input
RCA jack (shared terminal with Y of components) ×1
Component Video
Input
RCA jack (Y/Pb/Pr) ×3
HDMI Input
HDMI 19pin x 3
PC Input
D-Sub 15pin x 1 (RGB) / Mini jack Ø3.5 mm x 1 (Audio)
SCART
SCART x 1
Headphone Audio
Output
Mini jack Ø3.5 mm x 1
Coaxial digital audio
Output
RCA jack × 1
USB Input
USB × 1
Common Interface
CI Slot × 1
Sound Output
10 W, 8 ohm × 2
Remote control
Digital encoded infrared light system
Operating temperature range
5 °C to 40 °C
Power requirements
AC 220-240 V ~ , 50 Hz
Power consumption
105 W (standby: less than 0.5 W)
Dimensions
*Protruding parts
excluded.
without base
H:577.0 / W:961.0 / D:42.0
with base
H:621.0 / W:961.0 / D:236.0
Weight without base
13.4 kg
with base
16.1 kg
SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience
from two speakers, complete with rich bass, high frequency detail and clear dialog.
is a trademark of SRS Labs, Inc. TruSurround HD technology is incorporated under
license from SRS Labs, Inc.
“Tuxera NTFS Interoperability”
Used for licensee products which include Tuxera NTFS
2.A'0HO2CIG/QPFC[,WPG#/
EN
25
Declaration of Conformity
This product complies with the requirement of the related
directives.
is in compliance with the related regulations.
Servicing
Should your unit become inoperative, do not try to
correct the problem by yourself. There are no user-
serviceable parts inside. Take the unit to a Service Centre
for servicing.
Cabinet Cleaning
Wipe the front panel and other exterior surfaces of the
unit with a soft cloth.
Never use a solvent or alcohol. Do not spray insecticide
liquid near the unit. Such chemicals may cause damage
and discoloration to the exposed surfaces.
Panel Cleaning
If the LCD panel should require cleaning, wipe it with a
cotton or soft cloth. Before cleaning the panel,
disconnect the power cord.
License
This product uses some open source software:
FreeType
ICU License
“License Statement” is written at the end of book.
If you are interested in obtaining GPL source code used in
this product, please contact FUNAI ELECTRIC EUROPE
Sp. z o.o. ul. Inůynierska 1, 67-100 Nowa Sól, Poland.
We: FUNAI ELECTRIC EUROPE Sp. z o.o.
ul. Inůynierska 1, 67-100 Nowa Sól, Poland
declare that the following product:
LCD Television
Model LED40-H9825M
Trade Name: Funai
Printed in EU
2.A'0HO2CIG/QPFC[,WPG#/
I
License Statement
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
FreeType
Portions of this software are copyright (C) 1996-2002 The Free Type Project (www.freetype.org). All rights reserved.
ICU
Copyright (c) 1995-2003 International Business Machines Corporation and others All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation
files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify,
merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do
so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both
the above copyright notice(s) and this permission notice appear in supporting documentation.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS
INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL
DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the
sale, use or other dealings in this Software without prior written authorization of the copyright holder.
2.DQQM2CIG+/QPFC[,WPG#/
1EMN28420
A13P1EP ★★★★★
Web Site: http://www.funai.eu
2.DQQM2CIG/QPFC[,WPG#/
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Funai LED40H9825M bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Funai LED40H9825M in de taal/talen: Engels als bijlage per email.

De handleiding is 2,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Funai LED40H9825M

Funai LED40H9825M Gebruiksaanwijzing - Deutsch - 29 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info