503608
21
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
/('+0
LED LCD HD Fernseher
Téléviseur LED LCD HD
Televisión HD LCD LED
Televisore LDC LED HD
Televisão LCD LED HD
LED LCD HD Televisie
Τηλεόραση LED LCD HD
LED LCD HD-television
LED LCD HD Television
Telewizor LED LCD HD
Deutsch
Bedienungsanleitung
Français
Manuel du propriétaire
Español
Manual del propietario
Italiano
Manuale del proprietario
Português
Manual do proprietário
Nederlands
Gebruikershandleiding
Ελληνικά
Εγχειρίδιο οδηγιών
Svenska
Användarhandbok
English
Owner’s Manual
Polski
Instrukcja obsługi
To aid reporting in case of loss or theft, please record the unit’s model and serial numbers in the space provided. The numbers
are located at the rear of the unit.
Model number:_________________ Serial number:_________________
PRECAUTIONS
CAUTION
1. Do not attempt to open the cabinet. There are no user
serviceable parts inside. Refer all servicing to qualified service
personnel.
2. Slots and openings in the cabinet and the sides or bottom
are provided for ventilation. To ensure reliable operation
and to protect the unit from overheating, these openings
must not be blocked or covered. Avoid installation in
enclosed spaces such as bookcases unless proper
ventilation is provided.
3. Keep the unit away from radiators and other heat sources.
4. Do not push objects of any kind into the unit through the
cabinet slots or openings as they could touch electrically
live parts or short circuit parts resulting in a fire or electric
shock.
5. To prevent fire or shock hazard, do not expose this unit to
dripping or splashing, no objects filled with liquids, such as
vases, should be placed on the unit.
6. Use the unit on a horizontal (flat) surface only.
7. Do not place any combustible objects on the unit
(candles, etc.).
8.
The LCD panel used in this unit is made of glass. Therefore,
it can break when the unit is dropped or applied with
impact. Be careful not to be injured by broken glass pieces
in case the LCD panel breaks. The LCD panel is a very high
technology product with 921,600 thin film transistors,
giving you fine picture details. Occasionally, a few non-active
pixels may appear on the TV screen as a fixed point of
blue, green or red. Please note that this does not affect the
performance of your unit.
9. Disconnect the mains plug to switch off when the unit
becomes faulty or not in use.
10. The mains plug shall remain readily operable.
11. Read the manual instructions to ensure correct and safe
installation and interconnection of the unit in multimedia
systems.
12. Keep a distance of 20cm around the ventilation openings
of the unit.
13.
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
POWER SUPPLY
The main power supply is engaged when the main plug is plugged in a 220-240 V
• At least 2 people are required when carrying this unit.
• Make sure to hold the upper and bottom frames of the unit firmly as illustrated.
~, 50 Hz AC outlet. To operate the unit,
press Q (power) to turn on the unit.
WARNING: LIVE PARTS INSIDE. DO
WHEN CARRYING THIS UNIT
NOT REMOVE ANY SCREWS.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the apparatus’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (ser
vicing) instructions in the
literature accompanying the apparatus.
Do not place the unit on the furniture that is capable of being tilted by a child or an adult leaning, pulling, standing or
climbing on it. A falling unit can cause serious injury or even death.
WARNING: To prevent the spread of fire, keep candles
or other open flames away from this
product at all times
EN
2
INTRODUCTION
A Note about Recycling
This unit’s packaging materials are recyclable
and can be reused. Please dispose of any
materials in accordance with your local
recycling regulations.
This product consists of materials which can be
recycled and reused if disassembled by a
specialised company.
Following information is only for EU-member
states:
The use of the symbol indicates that this product may not
be treated as household waste.
By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the environment
and human health, which could otherwise be
caused by inappropriate waste handling of this
product.
For more detailed information about recycling
of this product, please contact your local city
office, your household waste disposal service or the shop
where you purchased the product.
Following information is only valid EU-member
States: Disposal of batteries and/or
accumulators
The crossed out wheeled dust bin symbol indicates that
batteries and/or accumulators must be collected and
disposed of separately from household waste.
If the battery or accumulator contains more than the
specified values of lead (Pb), mercury (Hg), and/or cadmium
(Cd) defined in the Battery Directive (2006/66/EC), then the
chemical symbols for lead (Pb), mercury (Hg) and/or
cadmium (Cd) will appear below the crossed out wheeled
dust bin symbol.
By participating in separate collection of
batteries, you will help to assure the proper
disposal of products and batteries and thus
help to prevent potential negative
consequences for the environment and human
health.
For more detailed information about the
collection and recycling programmes available in your
country, please contact your local city office or the shop
where you purchased the product.
Battery Precautions
Be sure to follow the correct polarity as indicated in the
battery compartment.
Reversed batteries may cause damage to the device.
Do not mix different types of batteries together (e.g.
Alkaline and Carbon-Zinc or rechargeable batteries like ni-
cad, ni-mh, etc.) or old batteries with fresh ones.
If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
Do not try to recharge batteries; they can overheat and
rupture.
Pb, Hg, Cd
Contents
PRECAUTIONS ................................................................ 2
INTRODUCTION ........................................................... 3
Supplied Accessories ........................................................................ 4
Symbols Used in this Manual ....................................................... 4
Attaching the Base ............................................................................. 4
Mounting the Unit on Your Furniture .................................... 4
Installing the Batteries ....................................................................... 4
Remote Control .................................................................................. 4
Your TV .................................................................................................... 5
PREPARATION FOR USE ............................................. 6
Antenna Connection ........................................................................ 6
External Connection ......................................................................... 6
Plug In the AC Power Cord ......................................................... 7
Initial Setup ............................................................................................. 7
OPERATIONS .................................................................. 8
Watching a TV Programme .......................................................... 8
Channel List ............................................................................................ 8
Sleep Timer ............................................................................................ 8
ECO Mode ............................................................................................. 8
Sound Select .......................................................................................... 8
TV Screen Information .................................................................... 9
EPG (Electronic Programme Guide) ....................................... 9
Switching the Input Mode .............................................................. 9
Photo / Music Playback ................................................................. 10
Changing the TV Screen Display Mode .............................. 13
OTHER SETTINGS ....................................................... 14
Picture Adjustment ......................................................................... 14
Advanced Picture Adjustment .................................................. 14
PC Settings ........................................................................................... 15
Sound Adjustment ........................................................................... 15
TV Settings ........................................................................................... 16
Channel Settings ............................................................................... 16
Setup Adjustment ............................................................................ 18
Subtitle Settings ................................................................................. 18
Teletext ................................................................................................. 19
Common Interface (CI) ................................................................ 19
Software Download ....................................................................... 19
Demo ...................................................................................................... 20
Reset Default ...................................................................................... 20
Parental Lock ...................................................................................... 20
fun-Link .................................................................................................. 21
TROUBLESHOOTING GUIDE ................................. 22
OTHER INFORMATIONS .......................................... 23
Specifications ....................................................................................... 23
Trademark Information ................................................................. 23
License .................................................................................................... 23
Declaration of Conformity ......................................................... 24
Cabinet Cleaning .............................................................................. 24
Panel Cleaning .................................................................................... 24
Servicing ................................................................................................. 24
License Statement .............................................. end of book
EN
3
Supplied Accessories
Remote Control
Batteries (R03/AAA, 1.5 V x 2)
Owner’s Manual
Screw kit for attaching the base
AC power cord
Symbols Used in this Manual
The followings are the description for the symbols used in
this manual.
If neither symbol appears, the operation is applicable to both.
Digital TV operation
Analogue TV operation
Attaching the Base
You must attach the base to the unit to have it as a table
top unit. Be sure the front and rear of the base match the
proper direction.
When attaching the base, ensure that all screws are tightly fastened.
If the base is not properly attached, it could cause the unit to fall,
resulting in injuries as well as damage to the unit.
Make sure the table is in a stable location.
1
Insert the main unit into metal neck of the base.
Make sure not to put the AC power cord between the
base and the unit.
At least 2 people are required for this step.
2
Drive Phillips head screws into the 4 threaded holes at
the rear of this unit until they are tight.
To remove the base from this unit
Unscrew the Phillips head screws on step 2. After the screws
are removed, move the unit up from the base.
Be careful not to drop the unit when you remove it.
DTV
ATV
Mounting the Unit on Your
Furniture
Screw this unit on your furniture tightly using wood screw
(not supplied) in the hole at the back of the base as shown.
Recommended screw dimension: 5.1 x 20 mm
screw hole
Rear of this unit
When you remove this unit make sure to unscrew the wood screw
from your Wood Stand, Furniture and other wood item.
Installing the Batteries
Install the batteries (R03 / AAA, 1.5 V x 2) matching the
polarity indicated inside battery compartment of the remote
control.
Remote Control
EN
4
Your TV
10
15
21
8
1
29
31
28
34 33
30
32
27
26
25
26
23
24
3735 36
1.
Q (power) (p. 6, 7)
Turns the unit on and go into standby mode.
2. SLEEP (p. 8)
3. Number buttons (p. 8)
Selects the desired channel in TV mode and enters the
password in the PIN code input field.
4.
ASPECT H (p. 13)
5. BACK (p. 8)
Returns to the previous display.
6.
K / L / 0 / 1 (cursor) (p. 7)
7. OK
8.
V
MENU (control panel) / MENU (remote control)
(p. 14)
9. AUDIO (p. 8)
10.
VOL. X / Y (control panel) /
A +/– (remote control) (p. 8)
VOL. X works same function as 1 (cursor) and
VOL. Y works same function as 0 (cursor) on the
menu.
11.
D (mute) (p. 8)
12. RED/GREEN/YELLOW/BLUE
(p. 8, 9, 10, 11, 19, 21)
Uses for EPG / teletext / fun-Link.
13.
p B buttons (p. 21)
Functionally useful for fun-Link.
14.
C (expand) / L (subpage) / M (hold) / E (text) /
F (reveal) / N (index) (p. 19)
15.
SOURCE G (p. 9)
SOURCE (control panel) works same function as
OK to determine the setting menu.
16. PICTURE MODE (p. 14)
17. SOUND MODE (p. 15)
18. GUIDE (p. 9)
19.
ECO I (p. 8)
20.
P (information) (p. 9)
21.
PROG. K / L (control panel) /
q r / s (remote control) (p. 8)
PROG. K / L (control panel)
works same function as K / L on the menu.
22.
K (subtitle) (p. 18)
Terminals
23. PC (VGA) Input jack (p. 7)
24. USB terminal (p. 10)
Data input from USB flash memory only.
User should not connect any devices to the USB terminal such as
digital camera, keyboard, mouse, etc. (because these will not work).
The software update is, in most cases, handled by an authorized
service person or in some circumstances the user may be asked to
do the software update themselves.
25. CI slot (p. 19)
26.
HDMI (HDMI 1 / HDMI 2 / HDMI 3) Input jack
(p. 6)
27. Headphone Audio Output jack
28.
O (aerial) Input jack (p. 6)
29. Audio Input jack for PC connection (p. 7)
30. Coaxial Digital Audio Output jack (p. 6)
31. Component Video, Composite Video and
Audio(L/R) Input jacks (p. 6)
32. SCART jack (p. 6)
The Audio (L) jack is for monaural input. The sound is heard from
both speakers. Use this jack for a monaural audio device.
33. AC power cord Inlet
34.
Main power switch t
Turns this unit’s main power on and off.
35. Illuminance sensor window
Alters the brightness of the TV screen automatically by
detecting your room lighting level. Do not block
anything in front of its window to work properly.
36. Standby / Power indicator
Lights up red when the unit goes into standby mode.
Light off when power is on.
37. Infrared sensor window
Receives the infrared rays transmitted from the remote
control.
EN
5
PREPARATION FOR USE
Read this first
No supplied cables are used with these connection. Please
purchase the necessary cables at your local store.
Illustration in the following connection are example. Read
the manual accompanying your device for more detail.
Before you connect, be sure your antenna or other device is
connected properly before plugging in the AC power cord.
Antenna Connection
Yo u r TV
VHF/UHF
MIXER
VHFUHF
RF cable
1
Connect an RF cable to O (aerial) Input jack at the
rear of this unit.
2
Plug this unit into an AC outlet.
3
Turns on the main power switch.
4
When the Standby / Power indicator on the front panel
lights red, then press
Q
to turn on the unit.
If you like to connect an active DVB-T antenna, the antenna must
have its own power supply.
It is not possible to power the antenna from the TV.
External Connection
HDMI Connection (HDMI 1 / HDMI 2 / HDMI 3)
HDMI cable
Your TV
Your device
This unit accepts 480i / 480p / 576i / 576p / 720p / 1080i / 1080p
video signals and 32 kHz / 44.1 kHz / 48 kHz only 2 channel audio
signals (LPCM).
You need to select “PCM” for the digital audio output of the device
you connect. Make sure the device outputs the digital audio. Audio
sometimes makes no sound if you select “Bitstream”, etc.
Dear Customer,
By connecting an HDMI cable to your Funai LCD TV,
you have to use only a certified HDMI cable to
guarantee a sufficient immunity against parasitic
frequency radiation.
A certified HDMI cable can be identified by the HDMI
logo on the cable or the cable package.
SCART Connection
SCART cable
Your TV
Your device
Input Output
S-Video Audio (L/R) CVBS RGB
Video and Audio (L/R)
Yes Yes Yes Yes
Outputs the RF input
signal converted as CVBS
signal.
Component / Composite Video Connection
AUDIO
COMPONENT
/ VIDEO IN
L
R
Y
/ VIDEO
Pb
Pr
AUDIO
OUT
COMPONENT
VIDEO OUT
audio cable
component video cable
Your TV
Your device
This unit accepts 480i / 480p / 576i / 576p / 720p / 1080i video
signals for component connection.
COMPONENT
/ VIDEO
AUDIO
OUT
VIDEO OUT
AUDIO
L
R
Y
/ VIDEO
Pb
Pr
audio cable
composite video cable
Your TV
Your device
Make sure the rest of Component Video jacks (Pb/Pr) are
unplugged completely when you plug the Composite Video jack to
Y/VIDEO terminal.
Audio Output Connection
DTV
For digital broadcasting only
DIGITAL
AUDIO
COAXIAL IN
DIGITAL
AUDIO
OUT
COAXIAL
digital audio
coaxial cable
Your TV
Your device
EN
6
PC Connection
PC-IN
AUDIO
LINE OUT
PC-IN
AUDIO
RGB
Mini-plug audio cable
VGA cable
with ferrite
core
Your TV
Your device
The following signals can be displayed.
Format Resolution Refresh rate
VGA 640 × 480
60 Hz
SVGA 800 × 600
XGA 1,024 × 768
WXGA 1,360 × 768
WXGA+ 1,440 × 900
SXGA 1,280 × 1,024
SXGA+ 1,400 × 1,050
WSXGA+ 1,680 × 1,050
HDTV 1,920 × 1,080
Other formats or non-standard signals will not be displayed
correctly.
Please use the VGA cable that has a ferrite core.
Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an
AC outlet after all the necessary connections are completed.
Your TV
AC outlet
Initial Setup
This section will guide you through the unit’s initial setting
which includes selecting a language for your on-screen menu
and auto scan, which automatically scans and memorises
viewable channels.
1
After making all the necessary connections, turn on the
unit using the main power switch, then press Q.
2
Use K / L repeatedly to select the menu language,
then press OK.
Initial Setup
OK
Initial Setup
Language
Language
Please select your language.
Български
Česky
Dansk
Deutsch
Eesti
Ελληνικά
English
Select Exit
3
Use K / L to select the location, then press OK.
Select [at Home], this unit is set to maximise the energy efficiency
for home setting and it can be adjusted through a choice of picture
and sound quality according to your preference.
Select [Retailstore], this unit will be set up with predefined setting
for retail displays. If you select [Retailstore], the settings of picture
and sound quality you adjusted will not be memorised after the unit
goes into standby mode.
When “Initial Setup” (p. 7) is completed, you cannot change the
location setting unless you restore this unit to “Factory Reset”
(p. 20) and that restarts all over again such as channel scanning.
4
Use K / L repeatedly to select the country, then press
OK.
Scan confirmation menu will appear.
You can also set regions at “Region” (p. 18), when you select
[Spain] or [Portugal].
5
When below display appear use
K
/
L
to select [Scan],
then press OK to start scanning.
0%
OK
Exit
Select
Back
Skip
Scan
If you skip this step, the channel
scan could be performed in Menu.
Start channel scan now?
First, please connect antenna.
Auto Scan
Auto Scan
Initial Setup
Initial Setup
If you press MENU during channel scanning, this operation will be
paused, then press MENU again get away the initial setup.
EN
7
OPERATIONS
Read this first
These operations are accessible by remote control. Some
may also be accessible by controls on the main unit.
Watching a TV Programme
To select a channel
Use q r / s repeatedly to select your desired channel, or
use the Number buttons to enter a channel number, then
press OK for quicker access.
(e.g.) If you want to select the channel 24 without pressing
OK, press 2 first, then press 4 within 3 seconds.
To adjust the volume
Use A +/– to adjust the audio volume.
Press D to turn on or off the sound right away.
You can recover the original volume by pressing D again or
A +/–.
Channel List
You can easily find a channel you want.
1
Press OK while watching a programme.
2
Use K / L to select the channel you want to watch,
then press OK.
700
901
51
12
5
2
1
EUT1
BCT
WNS
Drama Now!
ETV
EUT1 Radio
Euro CH
Next PagePrev Page
Channel List
Channel List
1
h
Radio Channel
2
e
Analogue Channel
Use RED / GREEN to move to the previous or next page.
3
Press BACK to exit.
You can edit the channel list at “Channel Settings” (p. 16).
Sleep Timer
The sleep timer can be set the unit to go into standby mode
after an incremental period of time.
1
Press SLEEP repeatedly to change the sleep time period.
Each time you press SLEEP, the timer increases from 10 minutes
up to 120 minutes.
Press SLEEP repeatedly until [Off] appears to cancel the sleep timer.
If the unit goes into standby mode, the sleep timer will be cancelled.
ECO Mode
When you set [ECO Mode] to [On], backlight brightness
will be reduced automatically which may save on power
consumption.
Press ECO I repeatedly to select [On] or [Off].
On The illuminance sensor senses the brightness of
the environment and, darkens the backlight
automatically when the room gets dark.
Off The illuminance sensor is not effect, and the
backlight level gets back the value you adjusted.
Sound Select
DTV
Press AUDIO to display currently selected audio language
with the number of available ones and press repeatedly to
cycle through them.
The display image can be found on the “TV Screen Information”
(p. 9).
Dolby Digital sound
Dolby Digital Plus sound
HE-AAC sound
no icon MPEG sound
ATV
Press AUDIO to display currently selected audio mode and
press repeatedly to cycle through the available audio mode.
(e.g.)
Dual 2Dual 1
Stereo
Nicam Mono
Nicam
Dual 2
Nicam
Dual 1
Mono
Mono
Mono
Mono
Mono
Nicam Stereo
EN
8
TV Screen Information
You can see the broadcasting information.
1
Press P to display fewer information and press again
more information will appear.
18
ETV
ETV
23:56
23:30 - 0:30
1/3
1/3
16:9
HD1080i
1/3
You’re turned to the Sounds, keep it here for the biggest
sounds around, it doesn’t get fresher than this! Call
09012 345 678 now to select a video
Hit Music
English
English
Now:
Dual 1
2
1
15
4
5
7
6
9
10
8
3
14 13
12 11
1 Channel name
2
Present programme
name / time
Use 0 / 1 to switch the
present and next programme.
(if available)
3 Current time
4 Channel number
5 Resolution / Format / TV aspect ratio
6 Audio language (DTV) / Audio mode (ATV)
7 Audio mode (DTV)
8 Subtitle (p. 18)
n
is displayed if the subtitle of
the TV programme is available.
j
is displayed if the subtitle of
the TV programme is for hearing
impaired.
9 Programme
information
When the programme
information consists of more
than 3 lines, use K / L to scroll.
10
Audio description
(p. 16)
g
is displayed when the TV
programme provides additional
audio description for visually
impaired.
11 Teletext (p. 19)
o is displayed if the teletext of
TV programme is available.
12 Scrambled
programme
m is displayed, when you are
watching the scrambled
programme.
13 Parental rating
(p. 20)
l is displayed if the parental
rating of TV programme is
available.
* The icon may differ
depending on the ratings.
14 Lock status
(p. 20)
f is displayed when you are
watching the TV programme
which you set the parental lock
or channel lock.
15 ATV broadcast
e
is displayed when it receives
analogue TV broadcast.
DTV broadcast
i is displayed when it receives
digital TV broadcast.
Radio service
h
is displayed when it receives
digital audio broadcast.
2
Press BACK to exit.
EPG (Electronic Programme
Guide)
DTV
You can easily find a channel or see the detailed channel
information. EPG gives you scheduled information of the TV
programmes.
1
Press GUIDE and use K / L to select a channel.
0:17
0:59
1:59
2:49
4:26
6
7
8
9
10
11
12
14
, 02
00:07:55
0:17 – 0:59
02
Next PagePrev Page
Music
Feb
Feb
Tue
Tue
Current time:
Viewing date:
Programme Guide
Programme Guide
ETV
Drama Now!
WNS
BCT
CBN
Pick Up Number
Our Home
Special
Hit Music
The Flying Women
KHN News
24 Movies
Euro CH
Press RED or GREEN to move the channel list to the previous or
next page.
Press OK to watch the selected channel.
2
Press 1 (cursor), then use K / L to select a
programme.
Press RED or GREEN to move the programme list to the previous
or next day.
Press OK to watch the selected programme if it is currently
available.
3
Press YELLOW to display more detailed programme
information.
When the programme information consists of more than 2 pages,
use RED or GREEN to move to the previous or next page.
4
Press GUIDE to exit.
Switching the Input Mode
You can switch the input mode to
TV mode or external input mode.
1
Press SOURCE
G
.
2
Use K / L to select the input
mode you want, then press
OK.
[COMPONENT] will be displayed if you connected component
video cables to this unit.
TV
SCART
VIDEO
HDMI 1
HDMI 2
HDMI 3
PC
USB
Select Input
Select Input
EN
9
Photo / Music Playback
This unit can play JPEG picture and MP3/WAVE music files.
Use the USB flash memory contains those files.
Before you begin: You must insert the USB flash memory to USB
terminal of this unit (shown below) and select [USB] at
[Select Input]. Refer to “Switching the Input Mode” (p. 9).
Your TV
The USB flash memory is not supplied with this unit.
The unit recognise a USB flash memory only.
Do not use a USB hub and an extension cord between the USB
flash memory and the unit.
Always insert the USB flash memory to this unit directly.
We do not guarantee the all USB flash memory can be supported
on this unit.
1
Press SOURCE G to appear the select input mode
and use K / L to select [USB], and then press OK.
2
Use 0 / 1 to select [Photo] or [Music], and then press
OK.
3
Press GUIDE to toggle between the play list and the
thumbnail to select the desired display method.
4
In the play list, use K / L to select the desired file, then
press OK or 1 (cursor).
In the thumbnail, use K / L / 0 / 1 to select the desired
file, then press OK.
Photo
Operation in List and Thumbnail view
Before adjust each setting, press MENU to display the menu.
Sort :
Use K / L to select [Sort], and then press OK, then use
K / L to select the sort order; [Date] or [Name].
Media Type :
Use K / L to select [Media Type], and then press OK,
then use K / L to select the media type; [Photo] or
[Music].
Thumbnail Size :
Use K / L to select [Thumbnail Size], and then press
OK, then use K / L to select the thumbnail size; [Small],
[Middle] or [Large].
Display all files :
Use K / L to select [Display all files], then press OK to
display all files.
All files may not be displayed even if you select
[Display all files] due to the amount of files/folders, the
length of their file/ folder name or the capacities.
When you want to display each folder or file, select
[Display current folder files], and then press OK.
\Travel\2011 03/10
.. Album01
Album07
Track01.mp3
00:01:37 00:05:48
Album02 Album03 Album04 Album05 Album06
Back
Play/Enter
Select
Display all files
Thumbnail Size
Media Type
Sort
Photo
Menu
Operation in Slideshow
B (PLAY) / F
Press to play or pause the slideshow.
q r / s
Press q r to skip forward the file.
Press q s to skip backward the file.
BACK
Press to go back to the previous screen.
Show details ( P ):
Press MENU and then use
K
/
L
to select [Show details],
and press OK.
[Name], [Date], [Resolution], [Size] and [Next].
Displaying no menu, the first press P to show toolbar. The
second press P to show details. The third press P to
remove the details.
Repeat (RED):
Press MENU and then use K / L to select [Repeat], and
press OK, then use K / L to select the repeat mode; none
or all repeat, and then press OK.
Displaying no menu, press RED to change the repeat
mode in order.
Shuffle (BLUE):
Press MENU and then use K / L to select [Shuffle], and
press OK then use K / L to select the shuffle mode; on
or off, and then press OK.
You can also set the shuffle mode on or off by pressing
BLUE while the menu is not displayed.
EN
10
Playing Operation
Transition (GREEN):
Press MENU and then use K / L to select [Transition],
and press OK, then use K / L to select the way of
transition mode below, and then press OK.
[None], [Dissolve], [Wipe right], [Wipe left],
[Wipe up], [Wipe down], [Box in], [Box out] and
[Random].
Displaying no menu, press GREEN repeatedly to change
transition of the slideshow in order.
Slide time (YELLOW):
Press MENU and then use K / L to select [Slide time],
and press OK, then use K / L to select the display time
below, and then press OK.
[7 seconds], [12 seconds] and [16 seconds].
Displaying no menu, press YELLOW to change the slide
time in order.
Pausing Operation
Rotate (GREEN):
Press MENU and then use K / L to select [Rotate], and
then press OK. And then every press on OK will turn the
picture clockwise by 90 degrees.
Displaying no menu, every press on GREEN will turn the
picture clockwise by 90 degrees.
Zoom (YELLOW):
Press MENU and then use K / L to select [Zoom], and
then press OK, then use K / L to select the zoom factor:
1x, 2x and 4x, and then press OK.
Displaying no menu, press YELLOW to change the zoom
factor in order.
Music
Operation in List and Thumbnail view
Before adjust each setting, press MENU to display the menu.
Sort :
Use K / L to select [Sort], and press OK, then use
K / L to select the sort order; [Name], [Genre], [Artist]
or [Album].
Media Type :
Use K / L to select [Media Type], and press OK, then
use K / L to select the media type; [Photo] or [Music].
Thumbnail Size :
Use K / L to select [Thumbnail Size], and press OK, then
use K / L to select the thumbnail size; [Small], [Middle]
or [Large].
Display all files :
Use K / L to select [Display all files], then press OK to
display all files.
All files may not be displayed even if you select
[Display all files] due to the amount of files/folders, the
length of their file/ folder name or the capacities.
When you want to display each folder or file, select
[Display current folder files], and then press OK.
Track09.mp3
00:00:58 00:04:49
9/17
Katana
F-Project
Best Hits
Rock
2011
00:04:49
Track10.mp3
BackPlay/Pause
Menu
Select
Next:
Duration:
Year:
Genre:
Album:
Artist:
Title:
Music
Operation in Playback
B (PLAY) / F
Press to play or pause the playback.
H / G
Press to skip backward or forward the file.
0 / 1 (cursor)
While holding 1, fast-forward the file.
While holding 0, rewind the file.
q r / s
q r works same function as G.
q s works same function as H.
E / D
Press to rewind or fast-forward the file.
Every press on E / D will rewind or fast-forward faster
up to five.
Repeat (GREEN):
Press MENU and use K / L to select [Repeat], then press
OK. Use K / L to select the following repeat mode;
[None], [Single] or [All], and press OK.
You can also set those repeat mode or none by pressing
GREEN while the menu is not displayed.
Shuffle (YELLOW):
Press MENU and use K / L to select [Shuffle On] or
[Shuffle Off] then, press OK to determine the shuffle
mode on or off.
You can also set the shuffle mode on or off by pressing
YELLOW while the menu is not displayed.
Show details ( P ):
Press MENU and use K / L to select [Show details], then
press OK.
[Title], [Artist], [Album], [Genre], [Year], [Duration]
and [Next].
You can also call up or turn off the details by pressing P
while the menu is not displayed.
Audio only:
Press MENU and use K / L to select [Audio only], to be
undisplayed all informations.
Press any button (except Q) to return the normal
display.
EN
11
5
Press SOURCE G and select input mode you want.
Be sure to keep a backup copy of the original files on your device
before you play them back on this unit. We have no responsibilities
for damage or loss of your stored data.
When you ready to remove a USB flash memory, at first turn off
the unit to avoid any damage for your data and the unit.
A USB flash memory that required its own driver or the device with
a special system such as fingerprint recognition are not supported.
This unit is not allowed to use the USB flash memory which requires
external power supply (500mA or more).
Only USB 1.1 and 2.0 is supported.
This unit can be recognised up to 3,000 files in the USB flash
memory.
This unit may not be recognised if the length of the file names is
too long. Only English characters can be recognised.
This unit does not support MTP(Media Transfer Protocol) or the
file other than FAT and FAT32 file system. If the file is not supported,
error message appears.
When the unit does not recognise the USB flash memory, try
reconnecting it.
It is supported that files to be played back in this unit are recorded
under the following specifications:
<JPEG>
Baseline 17,000x10,000
Progressive 4,000x4,000
<MP3>
Sampling frequency 32 kHz, 44.1 kHz or 48 kHz
16 kHz, 22.05 kHz or 24 kHz
8 kHz, 11.025 kHz or 12 kHz
Constant bit rate 32 kbps - 320 kbps
<WAVE>
Sampling frequency 32 kHz, 44.1 kHz or 48 kHz
Constant bit rate 16 bit PCM (big/little endian),
24 bit PCM (big endian)
EN
12
Changing the TV Screen Display Mode
You can select your favourite TV screen size.
Press ASPECT H repeatedly to switch the TV screen display mode.
For 16:9 video signal
[Auto] Selects the TV screen display mode automatically.
[4:3] Displays a 16:9 picture at a 4:3 size; the picture is shortened
horizontally. Sidebars appear on both edge of the TV screen.
[Full] Displays a 16:9 picture that is stretched horizontally and vertically.
[Zoom] Displays a 16:9 picture at its enlarged size without changing its
horizontal and vertical ratio.
[Cinema] Displays a 16:9 picture that is vertically stretched. This only crops
out the top of the picture.
[Expand] Displays a horizontally stretched picture. This crops out the left
and right sides of the picture.
[Unscaled] Displays a 16:9 picture at its original size.
You can set [Unscaled] in HD picture mode. (720p / 1080i / 1080p)
For 4:3 video signal
[Auto] Selects the TV screen display mode automatically.
[4:3] Displays a 4:3 picture at its original size. Sidebars appear on both edge
of the TV screen.
[14:9] Displays a 4:3 picture at a 14:9 size. Sidebars appear on both edge
of the TV screen. This crops out the top and bottom of the picture.
[Full] Displays a 4:3 picture at a 16:9 size; the picture is stretched horizontally
to fill the TV screen.
[Zoom] Displays a 4:3 picture at a 16:9 size; at its enlarged size without
changing its horizontal and vertical ratio. This crops out the top and bottom
of the picture.
[Cinema] Displays a 4:3 picture at a 16:9 size; the picture is stretched more
vertically at the top of the TV screen. This crops out the top of the picture.
[Wide] Displays the picture with its centre at the original size and the edges
stretched horizontally to fill the screen.
For PC input signal
[Normal] Displays a proportionally stretched picture. Mainly sidebars
appear on both edges of the TV screen.
[Full] Displays the picture with its centre at the original size and the edges
stretched horizontally to fill the screen.
[Dot by Dot] Displays a picture at its original size.
Unscaled
Expand
Cinema
Zoom
Full
Auto
4:3
Wide
Cinema
Zoom
Full
14:9
4:3
Auto
Dot by Dot
FullNormal
EN
13
OTHER SETTINGS
Read this first
Before adjust each setting, press MENU to display the
menu.
To exit the menu, press MENU.
Press MENU and no input for 1 minute, then the menu
disappears automatically.
Picture Adjustment
You can adjust the picture settings according to your
personal preference. These settings are automatically stored
after exiting the picture menu.
1
Use K / L to select [Picture], then press OK.
50
100
60
0
10
BackSelect
Cool
Dynamic
Features
Colour Temperature
Sharpness
Hue
Colour
Contrast
Brightness
Picture Mode
Parental
Others
TV
Sound
Picture
Picture
Picture Mode
2
Use K / L to select [Picture Mode], then select
[Standard], [Dynamic], [Movie], [Game] or [Personal]
using 0 / 1.
You can change picture mode easily using PICTURE MODE.
Press PICTURE MODE repeatedly to select picture mode you
want. In this function, you can set also assign the picture mode
individually to each input mode.
Brightness / Contrast / Colour / Hue / Sharpness
2
Use K / L to select the item you want, and then or
after press OK to appear the setting display, adjust the
setting using 0 / 1.
If you adjust the settings in other than [Personal] mode,
[Picture Mode] will be changed to [Personal].
Colour Temperature
You can change the colour tone of the picture.
2
Use
K
/
L
to select [Colour Temperature] and then
select [Warm], [Normal], or [Cool] using
0
/
1
.
Advanced Picture Adjustment
You can adjust the detailed picture settings according to
your personal preference.
1
Use K / L to select [Picture], then press OK.
2
Use K / L to select [Features], then press OK.
100
Back
Select
Features
On
On
Mid
Mid
Backlight
Adaptive Luma Control
Flesh Tone
DNR
Parental
Others
TV
Sound
Picture
CTI
DNR (Digital Noise Reduction)
You can adjust to reduce the appearance of digitizing error
caused by the compression.
3
Use K / L to select [DNR] and then select [Mid],
[High] or [Low] using 0 / 1.
CTI (Colour Transient Intensity)
You can adjust the picture for colour errors.
3
Use K / L to select [CTI] and then select [Mid], [High]
or [Low] using 0 / 1.
Flesh Tone
You can set to activate the flesh colour or not.
3
Use K / L to select [Flesh Tone], and then select [On]
or [Off] using 0 / 1.
Adaptive Luma Control
You can adjust changes in the luminance of the picture.
3
Use K / L to select [Adaptive Luma Control] and then
select [On] or [Off] using 0 / 1.
Backlight
You can adjust backlight brightness.
3
Use K / L to select [Backlight], and then adjust the
setting using 0 / 1.
After press OK and appear the setting display, you can adjust it.
When you set [ECO Mode] to [On] at “ECO Mode” (p. 8), this
function will not work even if you adjust the setting due to the ECO
Mode has priority.
EN
14
PC Settings
You can adjust the PC screen position, clock and phase.
Before you begin: You must connect your PC to this unit and
select [PC] at [Select Input]. Refer to “Switching the Input
Mode” (p. 9).
1
Use K / L to select [Picture], then press OK.
2
Use K / L to select [PC Settings], then press OK.
63
50
20
130
BackSelectOK
PC Settings
Clock
Phase
Vertical Position
Horizontal Position
Auto Adjustment
Parental
Others
Sound
Picture
Auto Adjustment
3
Use
K
/
L
to select [Auto Adjustment], then press OK.
Each setting will be adjusted automatically.
Horizontal Position / Vertical Position / Phase / Clock
3
Use K / L to select the item you want, then adjust the
settings according to your personal preference.
After press OK and appear the settings display, you can adjust them.
You can select your favourite PC screen size at “Changing the TV
Screen Display Mode” (p. 13).
Sound Adjustment
You can adjust the sound settings according to your personal
preferences.
1
Use K / L to select [Sound], then press OK.
63
0
50
-
BackSelectAdjust
On
Standard
Off
Off
Audio Description
Audio Type
TV Speakers
Auto Volume Control
Digital Audio Output
Sound Mode
Virtual Surround Sound
Treble
Bass
Balance
Parental
Others
TV
Sound
Sound
Picture
PCM
Balance / Bass / Treble
You can set left/right speaker setting.
2
Use K / L to select the item you want, and then adjust
the setting using 0 / 1.
Virtual Surround Sound
You can set to the sound modes for more spatial or
surround sound reproduction.
2
Use K / L to select [Virtual Surround Sound], and
then select [On] or [Off] using 0 / 1.
Sound Mode
2
Use K / L to select [Sound Mode], and then select
[Standard], [Movie], [Music], or [Game] using
0 / 1.
You can change sound mode easily using SOUND MODE.
Press SOUND MODE repeatedly to select sound mode you want.
Digital Audio Output
2
Use K / L to select [Digital Audio Output], and then
select [Auto] or [PCM] using 0 / 1.
Auto Dolby Digital (if available)
PCM PCM
Auto Volume Control
If set to [On], sudden changes in volume will be reduced
automatically, for example, during commercials or when
switching channels.
2
Use K / L to select [Auto Volume Control], and then
select [On] or [Off] using 0 / 1.
TV Speakers
Select the audio output from the unit’s speakers, or not. If
your amplifier is HDMI link function compatible and
connected by an HDMI cable to this unit, some sound
operations such as volume up can be changed by using this
unit’s remote control. Make sure [fun-Link Control] is set
to [On] (p. 21).
2
Use K / L to select [TV Speakers], then select
[On], [Off], or [Ext.Amp], using 0 / 1.
On The sound will be output from the unit’s
speakers.
Off The sound will not be output from the
unit’s speakers.
Ext.Amp You can control audio output from your
connected HDMI link devices by using this
unit’s remote control.
EN
15
Audio Type
You can adjust the audio type.
2
Use
K
/
L
to select [Audio Type], and then select [-],
[Hearing Impaired] or [Visually Impaired] using
0
/
1
.
Hearing Impaired:
Provides audio service for hearing impaired.
Visually Impaired:
Provides additional audio description for visually impaired.
Audio Description
You can adjust the audio output setting and volume for
[Visually Impaired].
2
After select [Visually Impaired], use K / L to select
[Audio Description], and then adjust the setting using
0 / 1.
After press OK and appear the mixing level display, you can adjust
it.
Only MPEG sound is available for this function.
TV Settings
You can select the country and audio language.
1
Use K / L to select [TV], then press OK.
BackSelect
TV
English
English
Channel
Sub Audio Language
Main Audio Language
Country
Parental
Others
TV
Sound
Picture
France
Country
You can set the country you want.
2
Use K / L to select [Country], and then select the
country you want using 0 / 1.
Main Audio Language / Sub Audio Language
DTV
You can select the main or sub audio language.
2
Use K / L to select [Main Audio Language] or
[Sub Audio Language], and then select each language
you want using 0 / 1.
Audio Channel
You can select the audio mode.
2
Use K / L to select [Audio Channel], and then select
[Stereo], [Mono], [Dual 1] or [Dual 2] using 0 / 1.
While watching a programme, you can change the audio language
easily using AUDIO when it is available.
Channel Settings
You can edit the channels.
1
Use K / L to select [TV], then press OK.
2
Use K / L to select [Channel], then press OK.
Back
Select
SearchChannel
Fine Tune
Channel Decode
Channel Edit
Channel Sort
Channel Skip
Update Scan
Manual Scan (DTV)
Manual Scan (ATV)
Auto Scan
Parental
Others
TV
Sound
Picture
Auto Scan
You can scan the DTV and ATV channel in your area
automatically.
When the scanning is completed, the lowest memorised digital or
analogue channel will be displayed.
If you press MENU during the scanning, this operation will be
stopped and the lowest memorised channel will be displayed.
Please note that after tuning, the analogue channels will be stored
in the order that they are broadcasted by your local transmitter.
This may not be in the same order in which you would like them
to be stored. If this is the case, you can change the order according
to your preference at “Channel Settings” (p. 16).
3
Use K / L to select [Auto Scan] and then press OK
to start scanning.
Manual Scan (ATV)
You can search ATV channel manually in your area.
3
Use K / L to select [Manual Scan (ATV)], then press
OK.
4
Use K / L to select [Start Frequency (MHz)] for
selection of the 3-digit frequency using the Number
buttons.
5
Use K / L to select [Scan Up] or [Scan Down], and
then press OK to start scanning greater than or less
than the adjusted frequency.
EN
16
Manual Scan (DTV)
You can search DTV channel manually in your area.
3
Use K / L to select [Manual Scan (DTV)], then press
OK.
4
Use 0 / 1 to select [Channel Number], and then press
OK to scanning.
Update Scan
Search and register unreceived ATV and DTV channels.
3
Use K / L to select [Update Scan], then press OK.
Channel Skip
When using q r / s, the channel you selected will be
skipped.
3
Use K / L to select [Channel Skip], then press OK.
4
Use K / L to select channel you want, then press
OK.
d will appear on the right of the channel.
Press OK again to cancel, and d will disappear.
Channel Sort
You can change the channel order.
3
Use K / L to select [Channel Sort], then press OK.
4
Use K / L to select the channel you want and press
OK to determine, then select another one and press
OK to change the order.
Channel Edit
You can set the channel number and name.
3
Use K / L to select [Channel Edit], then press OK.
4
Use K / L to select channel you want, then press
OK.
5
Use K / L to select [Channel Number] and enter the
number you want using the Number buttons, then
press OK.
6
Use K / L to select [Name] and enter the character
using the Number buttons, then press OK.
Using alphabet by the Number buttons, correspondence table
shown below.
Using 0 to erase 1 character.
ATV
6
Use K / L to select [Frequency (MHz)] and enter
frequency you want using the Number buttons, then
press OK.
7
Use K / L to select [Colour System] or
[Sound System], and then select the system you want
using 0 / 1.
Channel Decode
ATV
Some TV stations transmit encoded TV signals which can
only be viewed with a purchased or hired decoder. You can
connect such a decoder to SCART jack of the unit. This
function will automatically activate the connected decoder
for the channel.
3
Use K / L to select [Channel Decode], then press
OK.
4
Use K / L to select channel you want, then press
OK.
Press OK again to cancel, and k will disappear.
Fine Tune
ATV
3
Use K / L to select [Fine Tune], then press OK.
4
Use K / L to select the channel you want then press
OK.
5
Use 0 / 1 to adjust the setting you want then press
OK.
EN
17
Setup Adjustment
You can change other setting.
English
BackSelect
Reset
Demo
Software
Common Interface
Teletext
Subtitle
Time Setup
Menu Language
Parental
Others
Others
TV
Sound
Picture
Menu Language
1
Use K / L to select [Others], then press OK.
2
Use K / L to select [Menu Language], then press
OK.
Time Setup
1
Use K / L to select [Others], then press OK.
2
Use K / L to select [Time Setup], then press OK.
Time Zone
You can set the time zone according to the resident area.
3
Use K / L to select [Time Zone], and then select
[Auto] or the time you want using 0 / 1.
Auto:
Automatically selects the time zone of your area to ensure
the proper performance of the time.
Although you select [Auto], the correct time may not be displayed
on the “TV Screen Information” (p. 9) depending on DTV
broadcasting.
Region
In Spain or Portugal, you can select region where you live.
3
Use K / L to select [Region], and choose the region
you want using 0 / 1.
Auto Power Off
You can set the unit to go into standby mode automatically
if no activity is detected after the power is turned on for 4
hours. In spite of this setting, the unit goes into standby mode
automatically if there is no signal input from the antenna
terminal and no user operation for 15 minutes.
3
Use K / L to select [Auto Power Off], and then select
[On] or [Off] using 0 / 1.
Subtitle Settings
You can change the subtitle settings used for TV
programmes.
1
Use K / L to select [Others], then press OK.
2
Use K / L to select [Subtitle], then press OK.
Subtitle (ATV)
3
Use K / L to select [Subtitle (ATV)], and then select
[Muting], [On] or [Off] using 0 / 1.
-
BackSelect
Subtitle
English
English
Off
Subtitle Type
2nd Subtitle Language
1st Subtitle Language
Subtitle (ATV)
Parental
Others
TV
Sound
Picture
1st Subtitle Language / 2nd Subtitle Language
You can set 1st and 2nd subtitle language.
3
Use K / L to select [1st Subtitle Language] or
[2nd Subtitle Language], and then select the language
you want using 0 / 1.
While watching a programme, you can change the subtitle language
easily using K when it is available.
To hide the subtitle, select [Off] in [1st Subtitle Language].
Subtitle Type
You can select the preferred subtitle type.
3
Use K / L to select [Subtitle Type], and choose [-] or
[Hearing Impaired] using 0 / 1.
Hearing Impaired:
Provides subtitle commentary for hearing impaired.
EN
18
Teletext
You can change the teletext settings.
1
Use K / L to select [Others], then press OK.
2
Use K / L to select [Teletext], then press OK.
BackSelect
Teletext
Level 2.5
WEST EUR
English
Presentation Level
Decoding Page Language
Teletext Language
Parental
Others
TV
Sound
Picture
Teletext Language
You can select the preferred teletext language.
3
Use
K
/
L
to select [Teletext Language], then select the
language you want using
0
/
1
.
Decoding Page Language
You can switch to the appropriate language group.
You must select [RUSSIA] if you select the countries that use the
Cyrillic alphabet at “Country” (p. 16).
3
Use K / L to select [Decoding Page Language], then
select the language area you want using 0 / 1.
Presentation Level
You can adjust the teletext presentation level. Level 2.5
offers more colours and better graphics than Level 1.5.
3
Use
K
/
L
to select [Presentation Level], then select
[Level 1.5] or [Level 2.5] using
0
/
1
.
To show the teletext
1
Press E to turn on the teletext decoder.
[Teletext] information will appear.
2
Press E repeatedly to show the teletext in transparent
mode or picture and teletext mode.
If you want to select other pages, use the Number buttons or
K
/
L
.
To enlarge fonts, press C.
To select the teletext subpages, press L.
To directly select the page numbers shown at the bottom of the TV
screen, use RED/GREEN/YELLOW/BLUE.
To call up the hidden information, press F.
To hold the current page, press M.
To go back to the start page, press N.
To hide the teletext, press SLEEP.
3
Press BACK to turn off the teletext decoder.
Common Interface (CI)
DTV
This unit is equipped with a CI slot. You can enjoy additional
services with this function, for example Pay TV. The access
restrictions menu will appear on the TV screen when a CI
module is installed.
1
Go into standby mode and unplug from an AC outlet.
2
Insert the CI module straight to the CI slot of this unit.
Some CI modules may be a two-piece design consisting of a card
reader with the viewing card. When using this kind of card, insert
the card reader firmly into the CI slot on the unit first. Then, insert
the viewing card into the reader.
3
Plug this unit into an AC outlet and press Q to turn on
the unit.
4
Press MENU to display the menu.
5
Use K / L to select [Others], then press OK.
6
Use
K
/
L
to select [Common Interface], then press
OK.
7
Follow the instructions on the TV screen.
CI may not available in some countries or region.
In case of failure, you need to call your CI service provider.
Menu operations may vary depending on the viewing card.
Refer to the manual accompanying the viewing card.
Software Download
Software download complies in specified countries only. You
may not use this function depending on where you live.
1
Use K / L to select [Others], then press OK.
2
Use K / L to select [Software], then press OK.
Auto Update Search
When you set to [On], this unit into standby mode detects
and update a new version of software automatically.
3
Use K / L to select [Auto Update Search], then select
[On] or [Off] then using 0 / 1.
Power indicator lights up while the unit searches or updates the
software.
Software updating will start automatically.
EN
19
Search for new software
You can search for new version of software in TV mode
only.
3
Use K / L to select [Search for new software], then
press OK.
When this unit found a new version of software, software update
confirmation menu will appear.
This process may take up to 60 minutes.
4
After the software update is completed, press Q to
restart this unit.
Demo
E-pop
When you select [Location] to [Retailstore], E-pop is
displayed.
E-pop can be set to off or position you want in this function.
1
Use K / L to select [Others] by pressing OK, and
select [Demo], then press OK.
2
Use
K
/
L
to select [E-pop], and then select [Top],
[Bottom] or [Off] using
0
/
1
.
Reset Default
Reset
You can restore the all settings except channel setting and
parental lock settings.
1
Use K / L to select [Others] by pressing OK, and
select [Reset], then press OK.
2
Use 0 / 1 to select [OK], then press OK.
Parental Lock
You can proceed Parental setting, if you enter your PIN
code.
1
Use K / L to select [Parental], then press OK.
2
Use the Number buttons to enter the 4-digit PIN
Code you set.
If you have not setup your PIN Code, enter 1234.
When you enter correct PIN Code, settings display will appear
automatically.
BackSelect
Parental
Factory Reset
Change PIN Code
Maturity Rating
Channel Lock
Parental
Others
TV
Sound
Picture
OK
Channel Lock
You can set particular channels to be invisible.
When you select the locked channel, you need to enter the PIN
Code to watch.
If you want to unlock the locked channel, select OK to set by using
K / L, then the PIN Code again.
3
Use K / L to select [Channel Lock], then press OK.
4
Use K / L to select the channel you want, then press
OK.
f will appear on the right of the channel.
Press OK again to cancel, and f will disappear.
Maturity Rating
You can set the parental rating to avoid watching an
inappropriate programme for your children.
3
Use
K
/
L
to select [Maturity Rating], then press OK.
4
Use 0 / 1 to select the age restriction.
Change PIN Code
You can set your own PIN Code.
3
Use
K
/
L
to select [Change PIN Code], then press OK.
4
Use the Number buttons to enter the new 4-digit
number.
5
Use the Number buttons to enter the same 4-digit
number again.
Back
Change PIN Code
Confirmation
New PIN Code
Parental
Others
Sound
Picture
TV
Factory Reset
You can restore this unit to factory settings.
3
Use K / L to select [Factory Reset], then press OK.
4
Use 0 / 1 to select [OK], then press OK.
All the settings are restored to the default even memorised
channels, picture settings, and sound settings.
EN
20
fun-Link
This function allows you to operate the linked functions
between our brand devices with a fun-Link feature and this
unit connecting through an HDMI cable.
The set with fun-Link will interoperate without any problems with
other Funai devices which comply with fun-Link.
1
Press p B to display the menu.
2
Use K / L to select [Setup], then press OK.
fun-Link Control
You can set the fun-Link function On or Off.
3
Use K / L to select [fun-Link Control], then select
[On] or [Off] by pressing OK.
On:
Selects if you have connected an external device that is
compatible with the fun-Link function.
Off:
Disables all fun-Link functions.
The following additional settings will be greyed out when you set
to [Off].
Auto Device Off
You can set your device to turn off by interlocking from this
unit’s power.
3
Use K / L to select [Auto Device Off], then select
[On] or [Off] by pressing OK.
On:
Your connected fun-Link device turns off automatically when
the unit goes into standby mode.
Off:
Your connected fun-Link device stays on even if the unit
goes into standby mode.
Auto TV On
This unit will turn on detected when the power on signal is
sent from your connected fun-Link device.
3
Use K / L to select [Auto TV On], then select [On]
or [Off] by pressing OK.
On:
This unit turns on automatically when you turn on your
connected fun-Link device.
Off:
This unit stays standby mode even if you turn on your
connected fun-Link device.
Device Control
You can operate some functions such as disc playback or call
up the menu of the connected devices, by using this unit’s
remote control.
3
Use K / L to select [Device Control], then select [On]
or [Off] by pressing OK.
On:
B / C / H / G / F / E / D / p B /
K / L / 0 / 1 / OK / BACK / the Number buttons / RED /
GREEN / YELLOW / BLUE can be used to control your
connected fun-Link devices by this unit’s remote control.
Off:
Disables the device control.
Device List Update
This function lets you see the product model number or
name of connected devices.
3
Use K / L to select [Device List Update], then press
OK.
To show the menu of connected your devices
Make sure [fun-Link Control] and [Device Control] is set
to [On].
1
Press p B to display the menu.
2
Use K / L to select device you want, then press OK.
3
Use
K
/
L
to select the item you want, then press OK.
Device - Menu:
This function allows you to control the menu of your
connected fun-Link device.
Device - Contents:
This function allows you to control the top menu of your
DVD or Blu-ray discs.
Device - Favourite:
This function allows you to control the pop-up menu of your
Blu-ray discs.
Some of fun-Link functions may not be available depending on your
fun-Link devices or discs.
We do not guarantee 100 % interoperability with other brands of
HDMI link compliant devices.
4
Use
K
/
L
/
0
/
1
/ OK on this unit’s remote control to
operate the desired functions for your devices or discs.
EN
21
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities.
Before arranging for service, check these items. It could save you time and money.
Problem Possible Remedy
Remote Control Doesn’t Work
Is unit plugged in?
Power at outlet?
Check batteries in remote control.
Bars On TV Screen
If outside antenna is being used, check for broken wire.
Check for local interference.
Picture Distorted
Try a new channel, if OK, then possibly due to poor channel reception.
If outside antenna is being used, check for broken wire.
Surrounding temperature is too low.
Picture Rolls Vertically
Try a new channel, if OK, then possibly due to poor channel reception.
If outside antenna is being used, check for broken wire.
Check for local interference.
No Colour
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Adjust [Colour] control.
Poor Reception on Some Channels
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Check for local interference.
Weak Picture
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Adjust [Contrast] and [Brightness] control.
Surrounding temperature is too low.
Lines or Streaks in Picture
Try a new channel, if OK, then possibly due to poor channel reception.
If outside antenna is being used, check for broken wire.
Check for local interference.
Ghosts in picture
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Check for local interference.
Picture Blurred
Try a new channel, if OK, then possibly due to poor channel reception.
If outside antenna is being used, check for broken wire.
Sound OK, Picture Poor
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Check for local interference.
Adjust [Contrast] and [Brightness] control.
Picture OK, Sound Poor
Try a new channel, if OK, then possibly due to poor channel reception.
Check for local interference.
No Picture or Sound
Try a new channel, if OK, then possibly due to poor channel reception.
Is unit plugged in?
Power at outlet?
Is unit’s power on?
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Unplug the AC power cord and wait for about 1 minute, then plug the AC power
cord and turn on the unit again.
Different colour marks on TV
screen
Try a new channel, if OK, then possibly due to poor channel reception.
Black or Luminous point on TV
screen
It is quality of the LCD Panel.
Forget the PIN Code
Enter 4737, then set your desired password again.
EN
22
OTHER INFORMATIONS
Specifications
Model LED40-H9200M
LCD 40 inches
Television system DVB-T(MPEG2/H.264), PAL-B/G, D/K, SECAM-B/G, D/K, L
Terminals Antenna UHF/VHF 75 ohm
Audio Input RCA jack (L/R) × 2
Composite Video Input
RCA jack (shared terminal with Y of components) × 1
Component Video Input
RCA jack (Y/Pb/Pr) × 3
HDMI Input HDMI 19pin × 3
PC Input D-Sub 15pin × 1 (RGB) / Mini jack Ø3.5 mm × 1 (Audio)
SCART SCART × 1
Headphone Audio
Output
Mini jack Ø3.5 mm × 1
Coaxial Digital Audio
Output
RCA jack × 1
USB Input USB × 1
Common Interface CI Slot × 1
Sound Output 10 W, 8 ohm × 2
Remote control Digital encoded infrared light system
Operating temperature range 5 °C to 40 °C
Power requirements AC 220-240 V ~ , 50 Hz
Power consumption 99 W (standby: less than 0.5 W)
Dimensions
*Protruding parts
excluded.
without base
H:577.0 / W:956.0 / D:40.0
with base
H:621.0 / W:956.0 / D:240.0
Weight without base 13.1 kg
with base 15.6 kg
Trademark Information
Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby
Laboratories.
HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.
DVB is a registered trademark of the DVB Project.
The “HD TV 1080p” qualifier Logo is trademark of
DIGITALEUROPE.
License
This product uses some open source software:
FreeType
ICU License
“License Statement” is written at the end of book.
If you are interested in obtaining GPL source code used in this
product, please contact FUNAI ELECTRIC EUROPE Sp. z o.o.,
ul. Inżynierska 1, 67-100 Nowa Sól, Poland.
EN
23
Declaration of Conformity
This product complies with the requirement of the related
directives.
We: FUNAI ELECTRIC EUROPE Sp. z o.o.
ul. Inżynierska 1, 67-100 Nowa Sól, Poland
declare that the following product:
LCD Television
Model LED40-H9200M
Trade Name: Funai
is in compliance with the related regulations.
Cabinet Cleaning
Wipe the front panel and other exterior surfaces of the unit with
a soft cloth.
Never use a solvent or alcohol. Do not spray insecticide
liquid near the unit. Such chemicals may cause damage and
discoloration to the exposed surfaces.
Panel Cleaning
If the LCD panel should require cleaning, wipe it with a
cotton or soft cloth. Before cleaning the panel, disconnect
the power cord.
Servicing
Should your unit become inoperative, do not try to correct
the problem by yourself. There are no user-serviceable parts
inside. Take the unit to a Service Centre for servicing.
EN
24
Printed in EU
License Statement
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
FreeType
Portions of this software are copyright (C) 1996-2002 The Free Type Project (www.freetype.org). All rights reserved.
ICU
Copyright (c) 1995-2003 International Business Machines Corporation and others All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation
files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify,
merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do
so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both
the above copyright notice(s) and this permission notice appear in supporting documentation.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS
INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL
DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the
sale, use or other dealings in this Software without prior written authorization of the copyright holder.
I
Web Site: http://www.funai.eu
1EMN28019
A13P0EP
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Funai LED40H9200M bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Funai LED40H9200M in de taal/talen: Engels als bijlage per email.

De handleiding is 1,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Funai LED40H9200M

Funai LED40H9200M Gebruiksaanwijzing - Deutsch - 25 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info