503542
1
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
EN
2
PRECAUTIONS
CAUTION
1. Do not attempt to open the cabinet. There are no user
serviceable parts inside. Refer all servicing to qualified service
personnel.
2. Slots and openings in the cabinet and the sides or bottom
are provided for ventilation. To ensure reliable operation
and to protect the unit from overheating, these openings
must not be blocked or covered. Avoid installation in
enclosed spaces such as bookcases unless proper
ventilation is provided.
3. Keep the unit away from radiators and other heat sources.
4. Do not push objects of any kind into the unit through the
cabinet slots or openings as they could touch electrically
live parts or short circuit parts resulting in a fire or electric
shock.
5. To prevent fire or shock hazard, do not expose this unit to
dripping or splashing, no objects filled with liquids, such as
vases, should be placed on the unit.
6. Use the unit on a horizontal (flat) surface only.
7. Do not place any combustible objects on the unit
(candles, etc.).
8. The LCD panel used in this unit is made of glass. Therefore,
it can break when the unit is dropped or applied with
impact. Be careful not to be injured by broken glass pieces
in case the LCD panel breaks. The LCD panel is a very high
technology product with 921,600 thin film transistors,
giving you fine picture details. Occasionally, a few non-active
pixels may appear on the TV screen as a fixed point of
blue, green or red. Please note that this does not affect the
performance of your unit.
9. Disconnect the mains plug to switch off when the unit
becomes faulty or not in use.
10. The mains plug shall remain readily operable.
11. Read the manual instructions to ensure correct and safe
installation and interconnection of the unit in multimedia
systems.
12. Keep a distance of 20 cm around the ventilation openings
of the unit.
13. Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
POWER SUPPLY
The main power supply is engaged when the main plug is plugged in a 220-240 V~, 50 Hz AC outlet. To operate the unit,
press Q (power) to turn on the unit.
WARNING: LIVE PARTS INSIDE. DO NOT REMOVE ANY SCREWS.
To aid reporting in case of loss or theft, please record the unit’s model and serial numbers in the space provided. The numbers
are located at the rear of the unit.
Model number:_________________ Serial number:_________________
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the apparatus’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (ser
vicing) instructions in the
literature accompanying the apparatus.
Do not place the unit on the furniture that is capable of being tilted by a child or an adult leaning, pulling, standing or
climbing on it. A falling unit can cause serious injury or even death.
WARNING: To prevent the spread of fire, keep candles
or other open flames away from this
product at all times
EN
11
OTHER SETTINGS
Picture Adjustment
You can adjust the picture settings according to your personal
preference. These settings are automatically stored after
exiting the picture menu.
1 Use K / L to select [PICTURE], then press OK.
Picture Mode
2 Use K / L to select [Picture Mode], then press OK.
3 Use K / L to select the setting you want, then press
OK. ([Standard], [Dynamic], [Movie], [Game], or
[Personal])
Brightness / Contrast / Colour / Hue / Sharpness
2 Use K / L to select the item you want, then press OK.
•Use K / L to change the items.
3 Use 0 / 1 to adjust the settings according to your
personal preference, then press OK.
Advanced Picture Adjustment
You can adjust the detailed picture settings according to your
personal preference.
1 Use K / L to select [PICTURE], then press OK.
2 Use K / L to select [Features], then press OK.
Colour Temperature
You can change the colour tone of the picture.
3 Use K / L to select [Colour Temperature], then press
OK.
4 Use K / L to select the setting you want, then press
OK. ([Warm], [Normal], or [Cool])
DNR (Digital Noise Reduction)
You can adjust to reduce the appearance of digitizing error
caused by the compression.
3 Use K / L to select [DNR], then press OK.
4 Use K / L to select the setting you want, then press
OK. ([High], [Mid], or [Low])
CTI (Colour Transient Intensity)
You can adjust the picture for colour errors.
3 Use K / L to select [CTI], then press OK.
4 Use K / L to select the setting you want, then press
OK. ([High], [Mid], or [Low])
Adaptive Luma Control
You can adjust changes in the luminance of the picture.
3 Use K / L to select [Adaptive Luma Control] then
press OK.
4 Use K / L to select the setting you want, then press
OK. ([On] or [Off])
Backlight
You can adjust backlight brightness.
3 Use K / L to select [Backlight], then press OK.
4 Use 0 / 1 to adjust, then press OK.
•Use 0 (cursor) to dim / 1 (cursor) to brighten.
Read this first
Before adjust each setting, press MENU to display the menu.
To exit the menu, press MENU.
• You can change picture mode easily using PICTURE MODE. Press
PICTURE MODE repeatedly or use K / L to select picture mode
you want. In this function, you can set also assign the picture mode
individually to each input mode.
If you adjust the settings in other than [Personal] mode,
[Picture Mode] will be changed to [Personal].
Dynamic
30
42
30
0
0
Picture
Picture
PICTURE
SOUND
CHANNEL
OTHERS
LANGUAGE
Picture Mode
Brightness
Contrast
Colour
Hue
Sharpness
Features
If you adjust the brightness except 1, [ECO Mode] will be set to
[Off].
Normal
Mid
Mid
On
10
Features
Features
PICTURE
SOUND
CHANNEL
OTHERS
LANGUAGE
Colour Temperature
DNR
CTI
Adaptive Luma Control
Backlight
EN
12
Sound Adjustment
You can adjust the sound settings according to your personal
preferences.
1 Use K / L to select [SOUND], then press OK.
Sound Mode
2 Use K / L to select [Sound Mode], then press OK.
3 Use K / L to select the setting you want, then press
OK. ([Standard], [Movie], [Music], [Game], or
[Personal])
Equalizer
You can adjust tonal quality for each frequencies.
2 Use K / L to select [Equalizer], then press OK.
3 Use 0 / 1 to select the specific frequencies you want.
4 Use K / L to adjust the Level, then press OK.
Balance
You can set the balance of the left and right speakers.
2 Use K / L to select [Balance], then press OK.
3 Use 0 / 1 to adjust, then press OK.
•Use 0 / 1 to decrease right/left speaker volume level.
Auto Volume Control
If set to [On], sudden changes in volume will be reduced
automatically, for example, during commercials or when
switching channels.
2 Use K / L to select [Auto Volume Control], then press
OK.
3 Use K / L to select the setting you want, then press
OK. ([On] or [Off])
TV Speakers
Select the audio output from the unit’s speakers, or not. If your
amplifier is HDMI link function compatible and connected by
an HDMI cable to this unit, some sound operations such as
volume up can be changed by using this unit’s remote control.
Make sure
[FUN-LINK Control]
is set to
[On]
.
2 Use K / L to select [TV Speakers], then press OK.
3 Use K / L to select the setting you want, then press
OK. ([On], [Off], or [Ext. Amp])
Digital Audio Output
You can set the audio output to [Auto] or [PCM].
2 Use K / L to select [Digital Audio Output], then press
OK.
3 Use K / L to select the setting you want, then press
OK. ([Auto] or [PCM])
Channel Settings
You can edit the channels.
1 Use K / L to select [CHANNEL], then press OK.
2 Use K / L to select [Channel List], then press OK.
3 Use K / L to select the channel you want to edit, then
press OK.
You can change sound mode easily using SOUND MODE.
Press SOUND MODE repeatedly or use K / L to select sound
mode you want.
If you adjust the setting in other than [Personal] mode,
[Sound Mode] will be changed to [Personal].
Standard
Off
On
PCM
0
Sound
Sound
PICTURE
SOUND
CHANNEL
OTHERS
LANGUAGE
Sound Mode
Equalizer
Balance
Auto Volume Control
TV Speakers
Digital Audio Output
On
The sound will be output from the unit’s
speakers.
Off
The sound will not be output from the unit’s
speakers.
Ext. Amp
You can control audio output from your
connected HDMI link devices by using this unit’s
remote control.
Auto
Dolby Digital (if available)
PCM
PCM
18. ETV
19. Euro CH
20. Drama Now!
21. WNS
22. BCT
23. 24 Movies
Channel List -DTV-
Channel List -DTV-
PICTURE
SOUND
CHANNEL
OTHERS
LANGUAGE
Skip
Delete
Lock
Move Up
Move Down
Select
Edit Back
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Funai LED19H800 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Funai LED19H800 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Funai LED19H800

Funai LED19H800 Gebruiksaanwijzing - Deutsch - 22 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info