503746
12
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
1EMN21993C
L5820EA/L5920EA/L5821BB/L5921BB/L5823RD/L5923RD/L5824FE/L5924FE/L5926EG/L5827RH/L5927RH/L5850EA/
L5851BB/L5852FC/L5853RD/L5854FE/L5857RH/L5950EA/L5951BB/L5953RD/L5954FE/L5956EG/L5957RH**
EN
Printed in EU
LCD COLOUR TV
LCD-A2706 LCD-B2706 LCD-C2706 LCD-C2707 LCD-D2706 LCD-D2707
LCD-A2726 LCD-B2726 LCD-C2717 LCD-C2726 LCD-D2717 LCD-D2726
LCD-A3206 LCD-A3207 LCD-B3206 LCD-C3206 LCD-C3207 LCD-D3206 LCD-D3207
Owner’s Manual
Table of Contents
DECLARATION OF CONFORMITY ..................................................................................................................2
PRECAUTIONS.................................................................................................................................................3
OPERATING CONTROLS AND FUNCTIONS ..................................................................................................4
PREPARATION FOR USE ................................................................................................................................6
SET UP FOR USE.............................................................................................................................................8
OPERATIONS .................................................................................................................................................11
MAINTENANCE...............................................................................................................................................14
TROUBLESHOOTING GUIDE ........................................................................................................................15
SPECIFICATIONS...........................................................................................................................................16
Features
Stereo Sound System
On-Screen Display
Sleep Timer
Teletext
Screen Mode Selection
Auto Power Off Function- If there is no signal input from
the antenna terminal and no user operation for 15 minutes,
the TV will turn itself off automatically.
HDMI Input
COMPONENT Input
S-VIDEO Input
Supplied Accessories
Remote control
•Two R6 (AA) batteries
•Owners Manual
Model/Serial Number
To aid reporting in case of loss or theft, please record the TV’s
model and serial numbers in the space provided. The numbers are
located at the rear of the TV.
Model number:
Serial number:
A Note about Recycling
This product’s packaging materials are recyclable
and can be reused. Please dispose of any materials
in accordance with your local recycling
regulations.
This product consists of materials which can be
recycled and reused if disassembled by a
specialised company.
Batteries should never be thrown away or
incinerated but disposed of in accordance with
your local regulations concerning chemical
wastes.
Contact your council for details.
L5950EA(EN).fm Page 1 Friday, March 30, 2007 2:46 PM
2 EN
DECLARATION OF CONFORMITY
This product complies with the requirement of the directives
EMC-Directive: 89 / 336 / EEC
Low Voltage Directive: 73 / 23 / EEC
CE Marking: 93 / 68 / EEC
We declare that the following product:
LCD COLOUR TV, Model LCD-A2706, LCD-A2726,
LCD-A3206, LCD-A3207, LCD-B2706, LCD-B2726,
LCD-B3206, LCD-C2706, LCD-C2707, LCD-C2717,
LCD-C2726, LCD-C3206, LCD-C3207, LCD-D2706,
LCD-D2707, LCD-D2717, LCD-D2726, LCD-D3206,
LCD-D3207
Trade Name: Funai
is in compliance with following Regulations.
EN55013: 2001 + A1: 2003
EN55020: 2002 + A1: 2003
EN61000-3-2: 2000, EN61000-3-3: 1995 + A1: 2001
EN60065: 2002
EN60825-1: 1994 + A1: 1996 + A2: 2001
Help Phone Number in the UK (only for LCD-B2706 / LCD-B3206):
0870 383 3010
L5950EA(EN).fm Page 2 Friday, March 30, 2007 2:46 PM
3 EN
PRECAUTIONS
.
POWER SUPPLY
The main power supply is engaged when the main plug is
plugged in a 220-240 V, 50 Hz AC outlet. To operate the unit,
press
STANDBY-ON to turn on the unit.
WARNING: LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
CAUTION
1) Do not attempt to open the cabinet. There are no parts
you can service inside. Refer all servicing to qualified
service personnel.
2) Slots and openings in the cabinet and the sides or bottom
are provided for ventilation. To ensure reliable operation
and to protect the unit from overheating, these openings
must not be blocked or covered.
Avoid installation in enclosed spaces such as bookcases
unless proper ventilation is provided.
3) Keep the unit away from radiators and other heat sources.
4) Do not push objects of any kind into the unit through the
cabinet slots or openings as they could touch electrically
live parts or short circuit parts resulting in a fire or electric
shock.
5) To prevent fire or shock hazard, do not expose this
apparatus to dripping or splashing, no objects filled with
liquids, such as vases, should be placed on the apparatus.
6) Use this unit in a horizontal (flat) subsoil only.
7) Do not place any combustible objects on the device
(candles, etc.).
8) The LCD panel used in this product is made of glass.
Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by
broken glass pieces in case the LCD panel breaks.
The LCD panel is a very high technology product with
921,600 thin film transistors, giving you fine picture
details. Occasionally, a few non-active pixels may appear
on the screen as a fixed point of blue, green or red. Please
note that this does not affect the performance of your
product.
9) Disconnect the mains plug to shut off when find troubles
or not in use.
10)The mains plug shall remain readily operable.
11)Read both manual instructions to ensure correct and safe
installation and interconnection of the unit in multimedia
systems.
12)Keep the distances 20 cm around apparatus of ventilation
openings.
Connection to Power (Only for U.K.)
Before Switching on make sure that the voltage of your
electricity supply is the same as that indicated on the rating
plate.
Mains Cord
This appliance may be fitted with a non-rewireable plug. If it
is necessary to change the fuse in a non-rewireable plug the fuse
cover must be refitted. If the fuse cover is lost or damaged, the
plug must not be used until a replacement available from the
appliance manufacturer is obtained.
It is important that the colour of the replacement fuse cover
corresponds with the rating marking on the base of the plug.
If the plug has to be changed because it is not suitable for your
socket, or becomes damaged, it should be cut off and an
appropriate plug fitted following the wiring instructions
below. The plug removed must be disposed of safely as
insertion into a 13A socket is likely to cause an electrical
hazard. For your own safety read the following instructions
carefully before attempting to connect this unit to mains.
The wires in this mains lead are coloured in accordance with
the following code:
BLUE=NEUTRAL, BROWN=LIVE
Important
As the colours of the wires in the mains lead of this appliance
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:-
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
No connection is to be made to the earth terminal of the plug.
If a 13 Amp (BS 1363) Plug is used, a 5 Amp Fuse must be
fitted, or if any other type of Plug is used a 5 Amp Fuse must
be fitted, either in the Plug or Adaptor, or on the Distribution
Board.
Mains Supply: 220 - 240 V 50 Hz - AC only
Do not make any connection to the larger pin marked with the
letter “E” or by the symbol or coloured green or green and
yellow.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
FUSE
BLUE
(Neutral)
BROWN
(Live)
CORD GRIP
OUTER SHEATH OF THE WIRE
L5950EA(EN).fm Page 3 Friday, March 30, 2007 2:46 PM
4 EN
OPERATING CONTROLS AND FUNCTIONS
This manual describes the LCD-A2706, LCD-A2726, LCD-A3206, LCD-A3207, LCD-B2706, LCD-B2726, LCD-B3206, LCD-C2706,
LCD-C2707, LCD-C2717, LCD-C2726, LCD-C3206, LCD-C3207, LCD-D2706, LCD-D2707, LCD-D2717, LCD-D2726, LCD-D3206
and LCD-D3207. These models are different in size and shape, but operate identically. The LCD-A3206 / LCD-A3207 / LCD-B3206 /
LCD-C3206 / LCD-C3207 / LCD-D3206 / LCD-D3207 is illustrated.
CONTROL PANEL REMOTE CONTROL
1.
SETUP
Press to display the menu on the TV screen.
2. VOL. +/
-
(control panel) / +/
-
(vol.) (remote control)
Press to control the volume level.
VOL. + (control panel)
Same function as ENTER (remote control).
VOL.
-
(control panel)
Same function as BACK (remote control).
3. PROG. +/
-
(control panel)
Press to select item you want to adjust in the picture control
mode.
Press to select the setting mode from the menu on the TV
screen.
Press to go to the next page or the previous page of Teletext.
PROG. +/
-
(control panel) /
/ (prog.) (remote control)
Press to select memorised channel.
4. INPUT SELECT
Press to select TV or external input mode.
5. STANDBY-ON
Press to turn the TV ON or OFF (standby).
6. STANDBY/POWER indicator
Lights up in green when power is on.
Lights up in red when power is in standby mode.
7. 0-9 number buttons
Press two digits to directly access the desired channel.
Remember to press “
0” before a single digit channel.
8. (mute)
Press to mute the sound portion of the TV programme
(Volume level display turns LIGHT RED from LIGHT
WHITE). Press this button again or press
VOL. +/
-
on the
control panel or
+/
-
(vol.) on the remote control to restore
sound.
9. PROG RETURN
Press to go back to the previously viewed channel. For
example, pressing this button once will change channel
display from P03 (present channel) to P10 (previously
viewed channel) and pressing it a second time will return
from P10 to P03.
10. SOUND SELECT
Press to change sound modes.
11. SLEEP
Press to set the Sleep Timer.
12. DISPLAY
Press to display the channel number or input source on the
screen. If you press it again, the display will disappear.
13. COLOR SYSTEM
Press to select the input signal from the tuner or external
devices.
14. (hold)
Press to hold the current page of Teletext.
15. RED/GREEN/YELLOW/CYAN
Press to directly select the page numbers of Teletext shown
at the bottom of the TV screen.
16. (index)
Press to go back to the start page of Teletext.
17. REVEAL
Press to call up the hidden information of Teletext.
18. SUB CODE
Press to select subpages of Teletext.
19. EXPAND
Press to enlarge fonts of Teletext.
20. (text)
Press to switch Teletext on or off, or transparent mode.
21. Cursor K / L / s / B buttons
Press to select the setting mode from the menu on the TV
screen.
Press to select item you want to adjust in the picture control
mode.
Press to go to the next page or the previous page of Teletext.
22. ENTER
Press to determine the setting mode from the menu on the
TV screen.
Press to select or adjust from a particular menu
(for example: Language Selection, Channel Presetting, or
Picture Adjustment).
23. BACK
Press to return to the previously displayed menu.
24. SCREEN MODE
Press to select aspect ratios available for the screen.
25. Infrared sensor window
Receives the infrared rays transmitted from the remote
control.
Installing the Batteries
1)
Open the battery compartment cover.
2) Insert “R6” penlight batteries into battery compartment in the
direction as indicated by the polarity (
+/
) markings. Batteries
installed with incorrect polarity may damage the remote unit.
3) Close the cover.
4) Push the cover on its top side until it clicks in order to fit the
cover completely to the compartment.
STANDBY POWER
625
SETUP
VOL. PROG.
INPUT SELECT
12 34 5
STANDBY POWER
–+–+
STANDBY-ON
SLEEP
SCREEN
MODE
SOUND
SELECT
INPUT
SELECT
DISPLAY
SETUP
BACK
PROG RETURN
RED
REVEAL
COLOR
SYSTEM
EXPAND SUB CODE
GREEN YELLOW
ENTER
+
<
<
-
CYAN
STANDBY-ON
123
456
789
0
4
5
1
21
2
13
20
17
8
7
11
2
4
1
0
2
2
3
1
8
1
9
1
4
1
6
1
5
9
1
2
23
L5950EA(EN).fm Page 4 Friday, March 30, 2007 2:46 PM
5 EN
REAR PANEL
26. HDMI input jacks
HDMI: Connect to the HDMI and audio output jacks of
external devices.
27. SCART jacks
SCART1, SCART2: Connect to the scart jack of external
devices.
28. COMPONENT input jacks
COMPONENT: Connect to the component and audio
output jacks of external devices.
29. S-VIDEO input jack
VIDEO: Connect to the S-video output jack of external
devices.
30. VIDEO input jack
VIDEO: Connect to the video output jack of external
devices.
31. AUDIO L/R input jacks
VIDEO: Connect to the left/right audio output jacks of
external devices.
Note: The AUDIO L (input) jack is for mono input. The
sound is heard from both speakers. Use this jack for
monaural audio equipment to be hooked up.
32. Aerial input jack
Connect to an antenna or cable system.
AUDIO
HDMI IN
INNER JACKS INNER JACKS
R
L
HDMI
AUDIO
S-VIDEO
VIDEO
R
L
COMPONENT VIDEO
AUDIO
R
LPb
Y
Pr
3027 28 293126 32
L5950EA(EN).fm Page 5 Friday, March 30, 2007 2:46 PM
6 EN
PREPARATION FOR USE
Antenna Connection
1)
Insert the RF cable plug into the Aerial input jack at the
back of this unit.
2) Plug this unit into an AC outlet.
3) The STANDBY/POWER indicator on the front panel lights
red, then press
STANDBY-ON on the control panel or the
remote control to turn the unit on.
PROG. (+/
-
or / ) can also be used to turn the unit on.
External Connection
[HDMI CONNECTION]
This is the best method to connect this TV to video devices with
the HDMI output jack, such as DVD player with HDMI output
jack, etc. It can minimize the deterioration of image quality.
Use the HDMI cable (commercially available) for connection.
Connect the HDMI output jack of your video device to the
HDMI input jack of this unit.
Note:
This TV accepts 480i / 480p / 576i / 576p / 720p (50 Hz) /
720p (60 Hz) / 1080i (50 Hz) / 1080i (60 Hz) video
signals, and 32 kHz / 44.1 kHz / 48 kHz audio signals.
This TV accepts only 2 channel audio signals (LPCM).
You need to select “PCM” for the digital audio output of
the device you connect or the HDMI audio setting.
Audio sometimes makes no sound if you select
“Bitstream”, etc.
<When your video device has the DVI output jack…>
1) Connect the DVI output jack of your video device to the
HDMI input jack of this unit. Use the HDMI cable
(commercially available).
2) Connect the audio output jacks of your video device to the
HDMI AUDIO input jacks of the unit.
Note:
This TV accepts 480i / 480p / 576i / 576p / 720p (50 Hz) /
720p (60 Hz) / 1080i (50 Hz) / 1080i (60 Hz) video
signals.
Audio signals are converted to an analogue signal from
the digital if you make a connection above.
VHF/UHF
MIXER
VHF
UHF
To Aerial input jack
Rear of this TV
RF cable (not supplied)
AUDIO
HDMI IN
R
L
HDMI
HDMI OUT
Rear of this TV
To HDMI input jack
To HDMI output jack
HDMI cable (not supplied)
“HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.”
The “HD ready” Logo is a trademark of EICTA.
AUDIO
HDMI IN
R
L
HDMI
DVI OUT
AUDIO OUT
RL
Rear of this TV
HDMI cable (not supplied)
To audio
output jacks
To HDMI input jack
To HDMI AUDIO
input jacks
audio cable (not supplied)
To DVI output jack
L5950EA(EN).fm Page 6 Friday, March 30, 2007 2:46 PM
7 EN
[SCART CONNECTION]
This is a better method to connect this TV to video devices with
the scart output jack, such as DVD player, etc.
Connect the scart output jack of your video device to the SCART
jack of this unit. Use the scart cable (commercially available).
<Input and Output signal>
SCART1: Outputs the RF input signal converted as CVBS
signal.
SCART1, SCART2: RGB input signal, CVBS input/output
signal, Audio (L/R) input/output signal.
[COMPONENT CONNECTION]
This is a better method to connect this TV to video devices with
the Component output jacks, such as DVD player, etc.
1) Connect the video output jacks (Y, Pb, Pr) of your video
device to the COMPONENT input jacks (Y, Pb, Pr) of this
unit. Use the component cable (commercially available).
2) Connect the audio output jacks of your device to the
COMPONENT AUDIO input jacks of the unit.
Note:
This TV accepts 480i / 480p / 576i / 576p / 720p (50 Hz) /
720p (60 Hz) / 1080i (50 Hz) / 1080i (60 Hz) video
signals.
[S-VIDEO CONNECTION]
This is a good method to connect this TV to the video devices
with the S-video output jack. You can expect better picture quality
than the normal video cable connection.
1) Connect the S-video output jack of your video device to the
S-VIDEO input jack of this unit. Use the S-video cable
(commercially available).
2) Connect the audio output jacks of your device to the VIDEO
AUDIO L/R input jacks of the unit.
Note: If you connect to the S-VIDEO jack and the VIDEO
jack at the same time, S-video connection will have
priority.
[ANALOGUE AUDIO/VIDEO CONNECTION]
This is the general method to connect this TV to video devices
with the video and audio output jacks, such as VCR, Camcorder,
Video Game, etc.
1) Connect the video output of your video device to the
VIDEO input jack of this unit.
2) Connect the audio output jacks of your video device to the
VIDEO AUDIO L/R input jacks of the unit.
COMPONENT
AUDIO
R
LPb
Y
Pr
scart cable (not supplied)
To scart jack
To SCART jack
Rear of this TV
AUDIO
S-VIDEO
VIDEO
R
L
COMPONENT VIDEO
AUDIO
R
LPb
Y
Pr
To component video
output jacks
To COMPONENT
input jacks
To audio output
jacks
To COMPONENT AUDIO
input jacks
Rear of this TV
component cable (not supplied)
audio cable (not supplied)
AUDIO
S-VIDEO
VIDEO
R
L
COMPONENT VIDEO
AUDIO
R
LPb
Y
Pr
AUDIO
OUT
VIDEO
OUT
S-VIDEO
OUT
To S-VIDEO
input jack
To S-video
output jack
To audio
output jacks
To VIDEO AUDIO L/R input jacks
Rear of this TV
audio cable (not supplied)
S-video cable
(not supplied)
AUDIO
S-VIDEO
VIDEO
R
L
COMPONENT VIDEO
AUDIO
R
LPb
Y
Pr
AUDIO
OUT
VIDEO
OUT
To VIDEO input jack
To video
output jack
To audio
output jacks
To VIDEO AUDIO L/R input jacks
Rear of this TV
video cable (not supplied)
audio cable (not supplied)
L5950EA(EN).fm Page 7 Friday, March 30, 2007 2:46 PM
8 EN
SET UP FOR USE
Unless stated, all operations described are based on a remote
control use. Some operations can be carried out using the
buttons on the control panel.
On-screen menu will disappear from the TV screen
automatically after about 60 seconds if you do not press any
buttons during the setting operation.
Language Selection
If you want to change the language of the on-screen menu, follow
the procedure below.
1) Connect the power cord to a standard AC outlet.
Note: If some digits appear in the corner of the screen, press
STANDBY-ON without unplugging the power cord.
2) Press STANDBY-ON to turn on the TV.
3) Press SETUP so that the menu display appears on the TV
screen.
4) Press Cursor K / L to point to “INITIAL”, then press
ENTER.
5) Press Cursor K / L to point to “LANGUAGE”, then press
ENTER.
6) Press Cursor K / L repeatedly to select your desired
language, then press
ENTER.
7) Press SETUP to exit.
Note: If you select BACK” in the screen menu and press ENTER,
the display will return to previous one.
Automatic Channel Presetting
You can programme the tuner to scan only the channels that you
can receive in your area.
1) Press STANDBY-ON to turn on the TV.
2) Press SETUP so that the menu display appears on the TV
screen.
3) Press Cursor K / L to point to “INITIAL”, then press
ENTER
.
4) Press Cursor K / L to point to “CHANNEL TUNING”,
then press
ENTER
.
5) Press Cursor K / L to point to “AUTO”, then press ENTER.
The tuner scans and memorises all the active channels in your
area. When “AUTO TUNING” is completed, the lowest
memorised channel reappears on the screen, and you can use
PROG. +/
-
on the control panel or / (prog.) on the
remote control for the memorised channels.
•If you press
SETUP during the scanning, this operation will
stop and the lowest memorised channel will appear on the TV
screen.
SETUP
BRIGHT
AUTO
[
]
[
]
BACK
BACK SELECT OK
ENTER
PICTURE
BACK LIGHT
HDMI AUDIO
INITIAL
INITIAL
CHANNEL TUNING
LANGUAGE
BACK
BACK
BACK SELECT OK
ENTER
LANGUAGE
DEUTSCH
ENGLISH
ESPAÑOL
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
POLSKI
BACK
РУССКИЙ
BACK
BACK SELECT OK
ENTER
(Only for LCD-B2706 / LCD-B3206 / LCD-B2726)
Sorting of TV channels from P01 to P05 will be performed
automatically as follows.
P01 : BBC1 P04 : CH4
P02 : BBC2 P05 : CH5
P03 : ITV
SETUP
BRIGHT
AUTO
[
]
[
]
BACK
BACK SELECT OK
ENTER
PICTURE
BACK LIGHT
HDMI AUDIO
INITIAL
INITIAL
CHANNEL TUNING
LANGUAGE
BACK
BACK
BACK SELECT OK
ENTER
CHANNEL
BACK
BACK SELECT OK
ENTER
AUTO
MANUAL
MOVE
BACK
AUTO TUNING
START
FINISH
L5950EA(EN).fm Page 8 Friday, March 30, 2007 2:46 PM
9 EN
Manual Channel Presetting
You can preset a channel manually and individually.
1) Follow the steps 1) to 4) in the “Automatic Channel
Presetting”.
2) Press Cursor K / L to point to “MANUAL”, then press
ENTER
.
3) (Only for LCD-C2706 / LCD-C2707 / LCD-C2717 /
LCD-C2726 / LCD-C3206 / LCD-C3207)
Press
Cursor K / L to point to “SYSTEM”, then press
ENTER.
Press
Cursor K / L to select the desired system, then press
ENTER.
4) Press Cursor K / L to point to “POSITION”, then press
ENTER
.
5) Press the Number buttons or Cursor K / L to select your
desired position number, then press
ENTER
.
You can select position number 01-99.
If you want to remove scrambled signals, press
Cursor K / L repeatedly to point to “DECODER”. Then,
press
ENTER. Press Cursor K / L to select “ON”, then
press
ENTER.
6) Press Cursor K / L to point to “CHANNEL”, then press
ENTER
.
7) Press Cursor K / L to start scanning.
• The tuner will begin to search up or down automatically.
When a channel is found, the unit will stop searching and
the picture will appear on the TV screen.
You can select desired channel number by using
the Number buttons. You must refer to the following
Channel Plan table and press three digits to select the
channel number.
(To select channel 24, press “
0” button first and then press
2” and “4”.)
If this is the channel you want, press
ENTER.
This unit can receive Hyper and Oscar frequency bands.
8) Press SETUP to exit.
Note: To confirm that a channel has been added, press
/ (prog.).
If you insert the RF cable plug into the Aerial input
jack after manual channel presetting, a picture will be
distorted. In this case, press
/ (prog.) to select the
same channel again.
Decoder Allocation
Some TV channels transmit encoded TV signals which can only
be viewed with a purchased or hired decoder. You can connect
such a decoder to SCART1 jack of this unit. The following
function will automatically activate the connected decoder for the
desired TV channel.
1) Press STANDBY-ON to turn on the TV.
2) Press / (prog.) or the Number buttons to select the
TV channel which you would like to allocate the decoder to.
3) Press SETUP so that the menu display appears on the TV
screen.
4) Press Cursor K / L to point to “INITIAL”, then press
ENTER
.
5) Press Cursor K / L to point to “CHANNEL TUNING”,
then press
ENTER
.
6) Press Cursor K / L to point to “MANUAL”, then press
ENTER.
7) Press Cursor K / L to point to “DECODER”, then press
ENTER.
8) Press Cursor K / L to select “ON” (decoder switched on),
then press
ENTER.
To switch off the decoder, press
Cursor K / L to select
“OFF”.
9) Press SETUP to exit.
The decoder has now been allocated to this TV channel.
Channel Plan
TV Channel
CH
Indication
PAL I PAL B/G SECAM D/K SECAM L
01–10
IRA–
IRJ,GAP
F1–F10
02–12 E2–E12
13–20
A-H
(only ITALY)
––
21–69 E21–E69
74–78 X, Y, Z, Z+1, Z+2
80–99, 100 S1–S20, GAP
71–86 B–Q
90–106 S4–S20
121–141 S21–S41
142–153 R1–R12
SETUP
BRIGHT
AUTO
[
]
[
]
BACK
BACK SELECT OK
ENTER
PICTURE
BACK LIGHT
HDMI AUDIO
INITIAL
INITIAL
CHANNEL TUNING
LANGUAGE
BACK
BACK
BACK SELECT OK
ENTER
CHANNEL
BACK
BACK SELECT OK
ENTER
AUTO
MANUAL
MOVE
BACK
MANUAL CHANNEL
BACK
BACK SELECT OK
ENTER
POSITION
CHANNEL
DECODER
SKIP
BACK
P55
055
OFF
OFF
[
]
[
]
SETUP
BRIGHT
AUTO
[
]
[
]
BACK
BACK SELECT OK
ENTER
PICTURE
BACK LIGHT
HDMI AUDIO
INITIAL
INITIAL
CHANNEL TUNING
LANGUAGE
BACK
BACK
BACK SELECT OK
ENTER
CHANNEL
BACK
BACK SELECT OK
ENTER
AUTO
MANUAL
MOVE
BACK
MANUAL CHANNEL
BACK
BACK SELECT OK
ENTER
POSITION
CHANNEL
DECODER
SKIP
BACK
P55
055
ON
OFF
[
]
[
]
L5950EA(EN).fm Page 9 Friday, March 30, 2007 2:46 PM
10 EN
To Skip a Preset Channel
The channels you can no longer receive or seldom watch can be
set to be skipped when you access channels by pressing
/ (prog.).
1) Follow the steps 1) to 4) in the “Automatic Channel
Presetting”.
2) Press Cursor K / L to point to “MANUAL”, then press
ENTER
.
3) Press Cursor K / L to point to “POSITION”, then press
ENTER
.
4) Press the Number buttons or Cursor K / L to select
relevant position number, then press
ENTER
.
5) Press Cursor K / L to point to “SKIP”, then press ENTER to
select “ON”.
To memorise the channel again, press ENTER
. Press
Cursor K / L to change “ON” into “OFF”, then press
ENTER
.
6) Press SETUP to exit.
Note: To confirm that a channel has been deleted, press
/ (prog.).
Channel Reprogramming
You can move a channel allocated to a position to another while
keeping the total number of the positions the same. When you
move a channel, all the other channels in the positions will be
affected.
1) Follow the steps 1) to 4) in the “Automatic Channel
Presetting”.
2) Press Cursor K / L repeatedly to point to “MOVE”, then
press
ENTER
.
3) Press Cursor K / L repeatedly to select the position number
you want to change the channel, then press
ENTER
.
You cannot select a position number where “ ” (blank)
appears next to the number. This is because “SKIP” is set to
“ON” for this position number.
4) Press Cursor K / L repeatedly to move the selected channel
to the programme number you want to assign, then press
ENTER
.
5) Press SETUP to exit.
Stereo Sound System
This TV will receive stereo and bilingual broadcasts.
Selecting the Sound Mode
You can select each mode by pressing SOUND SELECT on the
remote control. Each mode is indicated on the TV screen as
following.
During reception of stereo broadcasts
During reception of bilingual broadcasts
SETUP
BRIGHT
AUTO
[
]
[
]
BACK
BACK SELECT OK
ENTER
PICTURE
BACK LIGHT
HDMI AUDIO
INITIAL
INITIAL
CHANNEL TUNING
LANGUAGE
BACK
BACK
BACK SELECT OK
ENTER
CHANNEL
BACK
BACK SELECT OK
ENTER
AUTO
MANUAL
MOVE
BACK
MANUAL CHANNEL
BACK
BACK SELECT OK
ENTER
POSITION
CHANNEL
DECODER
SKIP
BACK
P55
055
[
OFF
]
[
ON
]
Mode Audio output
Display on
the TV screen
Stereo Stereo STEREO
L L audio from the both speakers LEFT
R R audio from the both speakers RIGHT
Normal Monaural - None -
Mode Audio output
Display on
the TV screen
Main Main audio from the both speakers MAIN
Sub Sub audio from the both speakers SUB
Main / Sub
Main audio from the left speaker
Sub audio from the right speaker
MAIN + SUB
SETUP
BRIGHT
AUTO
[
]
[
]
BACK
BACK SELECT OK
ENTER
PICTURE
BACK LIGHT
HDMI AUDIO
INITIAL
INITIAL
CHANNEL TUNING
LANGUAGE
BACK
BACK
BACK SELECT OK
ENTER
CHANNEL
BACK
BACK SELECT OK
ENTER
AUTO
MANUAL
MOVE
BACK
MOVE CHANNEL
2
3
4
5
6
7
8
9
1
10
002
003
004
005
006
007
008
009
010
011
12
13
14
15
16
17
18
19
11
20
012
013
014
015
016
017
018
019
020
021
BACK
BACK SELECT OK
ENTER
MOVE CHANNEL
2
3
4
5
6
7
8
9
1
10
002
003
004
005
006
007
008
009
010
011
12
13
14
15
16
17
18
19
11
20
012
013
014
015
016
017
018
019
020
021
BACK
BACK SELECT OK
ENTER
Position
Number
Channel
Number
MOVE CHANNEL
2
3
4
5
6
7
8
9
1
10
002
003
004
005
006
007
008
009
010
011
012
12
13
14
15
16
17
18
19
11
20
013
014
015
016
017
018
019
020
021
BACK
BACK SELECT OK
ENTER
L5950EA(EN).fm Page 10 Friday, March 30, 2007 2:46 PM
11 EN
OPERATIONS
Watching a TV Programme
1)
Press STANDBY-ON to turn on the TV.
2) Select the desired channel with / (prog.) or
the Number buttons.
Enter a channel number as two digits within 2.5 seconds for
the quickest results. For example, to select channel 6, press
0 and 6. If you only press 6, channel 6 will be selected after
2.5 seconds.
You can only select channels 1–99.
3) Adjust the volume to the desired listening level using
VOL. +/
-
on the control panel or +/
-
(vol.) on the remote
control.
If you want to mute the sound temporarily (e.g. during a
telephone call), press
(mute) on the remote control.
When you press
(mute) again, the sound will return at
its original volume level.
4) Adjust picture controls for a natural looking image.
(See “Picture Adjustment”.)
External Input Mode
When you connect external devices including DVD player, DVD
recorder and home audio system, you can easily switch the input
mode by using
INPUT SELECT.
Each time you Press
INPUT SELECT, TV screen will change as
below.
To use the HDMI input jack on the TV, select “HDMI”.
To use the SCART1 input jack on the TV, select “SCART1”.
To use the SCART2 input jack on the TV, select “SCART2”.
To use the COMPONENT input jack on the TV, select
“YPbPr”.
To use the VIDEO or S-VIDEO input jack on the TV, select
“VIDEO”.
Note: • When you use the S-VIDEO connection, S-VIDEO
input jack is given priority over the VIDEO input jack.
TV Colour System Change
Different countries use different television colour systems. You
can change the system by pressing
COLOR SYSTEM.
When you select “AUTO” by pressing
COLOR SYSTEM, this
unit will distinguish the system automatically according to the
input signal from the tuner or external devices.
If the picture on the TV screen is black and white, select the
system manually by using
COLOR SYSTEM. Each time you press
COLOR SYSTEM, TV screen will change as follows.
(LCD-A2706 / LCD-A3206 / LCD-A3207 / LCD-B2706 /
LCD-B3206 / LCD-D2706 / LCD-D2707 / LCD-D2717 /
LCD-D3206 / LCD-D3207 / LCD-A2726 / LCD-B2726 /
LCD-D2726)
for tuner input (TV):
AUTO or PAL
for external input (SCART, S-VIDEO, VIDEO):
AUTO, PAL, NTSC3.58 or NTSC4.43
(LCD-C2706 / LCD-C2707 / LCD-C2717 / LCD-C2726 /
LCD-C3206 / LCD-C3207)
for tuner input (TV):
AUTO, SECAM or PAL
for external input (SCART, S-VIDEO, VIDEO):
AUTO, SECAM, PAL, NTSC3.58 or NTSC4.43
Teletext Reception
Many TV channels transmit Teletext information along with their
TV channels. With this unit, you can retrieve and display it on the
screen using the built-in Teletext decoder.
1) Press (text) to switch the Teletext decoder on. Your unit
now shows Teletext for the TV channel you have selected.
Press
(text) again to show Teletext in transparent mode.
2) If you want to select another page, press the Number
buttons or Cursor K / L.
Note: • To enlarge fonts, press EXPAND.
To select Teletext subpages, press SUB CODE.
To directly select the page numbers shown at the bottom
of the TV screen, use
RED/GREEN/YELLOW/CYAN.
To call up the hidden information, press REVEAL.
To hold the current page, press (hold).
To go back to the start page, press (index).
3) Press (text) to switch the Teletext decoder off.
Setting the Sleep Timer
The sleep timer function allows you to have the power
automatically turn off after a set time period.
1) Press STANDBY-ON to turn on the TV and press SLEEP on
the remote control.
2) You may change the sleep time by pressing SLEEP on the
remote control repeatedly. The timer can be set up to 90
minutes. Each time
SLEEP is pressed the time increases by
30 minutes. (The timer display counts up and sleep timer will
be displayed on the screen when you press
SLEEP on the
remote control.)
Note: • When you disconnect the unit from the AC outlet or
when you have a power failure, the sleep time will be lost.
To Cancel the Sleep Timer
Press
SLEEP repeatedly until “0” is displayed.
TV channel HDMI SCART1
SCART2
VIDEO
YPbPr
L5950EA(EN).fm Page 11 Friday, March 30, 2007 2:46 PM
12 EN
Picture Adjustment
The picture can be adjusted according to your personal
preferences. These settings are automatically stored after exiting
the picture menu.
1) Press SETUP so that the menu display appears on the TV
screen.
2) Press Cursor K / L to point to “PICTURE”, then press
ENTER.
3) Press Cursor K / L to select an item you want to adjust, then
press
ENTER
.
Note: If you want to initialise the picture adjustment settings,
select “RESET” and press ENTER.
4) Press Cursor K / L to adjust the level, then press ENTER
.
5) Press SETUP to exit.
“TINT” appears only when receiving NTSC signals from an
additional device connected by either SCART jack, VIDEO input
jack or S-VIDEO input jack.
HDMI AUDIO Selection
Set the method of sound input for HDMI input jacks.
1)
Press SETUP so that the menu display appears on the TV
screen.
2) Press Cursor K / L to point to HDMI AUDIO, then press
ENTER.
3) Press Cursor K / L to select the desired HDMI Audio, then
press
ENTER.
Select “AUTO” if you want to select digital audio input
signal or analogue audio input signal automatically. Digital
audio input signal is given priority if both audio signals are
input to this unit at the same time.
Select
DIGITAL if you connected to digital device with
HDMI jack for digital audio input signal.
Select
ANALOGUE if you connected to analogue devices
with analogue jacks for analogue audio input signal.
Back Light Selection
1)
Press SETUP so that the menu display appears on the TV
screen.
2) Press Cursor K / L to point to “BACK LIGHT”, then press
ENTER.
3) Press Cursor K / L to select the desired mode (“BRIGHT”/
“NORMAL”/“DARK”), then press
ENTER.
4) When done, press SETUP to exit.
Status Display
To check the Channel number & Audio mode, press DISPLAY.
Each time you press
DISPLAY, TV screen will change as
illustrated:
When you select the channel using
the Number buttons, select
the desired channel (position number).
Cursor L Cursor K
BRIGHTNESS
to decrease
brightness
to increase
brightness
CONTRAST to decrease contrast to increase contrast
COLOUR to pale to brilliant
SHARPNESS to soft to clear
TINT to purple to green
SETUP
BACK
BACK SELECT OK
ENTER
PICTURE
BACK LIGHT
HDMI AUDIO
INITIAL
BRIGHT
AUTO
[
]
[
]
PICTURE
0
0
-2
+11
+3
BACK
BACK SELECT OK
ENTER
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
TINT
RESET
BACK
SETUP
DIGITAL
AUTO
ANALOGUE
BACK
BACK SELECT OK
ENTER
PICTURE
BACK LIGHT
HDMI AUDIO
INITIAL
SETUP
BACK
BACK SELECT OK
ENTER
PICTURE
BACK LIGHT
HDMI AUDIO
INITIAL
BRIGHT
NORMAL
DARK
P01
STEREO
<OFF>
<CHANNEL NUMBER/
EXTERNAL MODE and
AUDIO MODE>
Press once
L5950EA(EN).fm Page 12 Friday, March 30, 2007 2:46 PM
13 EN
Changing the Screen Display Mode
You can select your favourite screen size by using
SCREEN MODE in both 4:3 and 16:9 TV aspect ratios.
Each time you press
SCREEN MODE, the screen mode will
change repeatedly.
Note: You may not switch the display mode depending on the
program.
<When the video signal is sending SD (Standard Definition)
video signal...>
4:3 will display a picture at its standard 4:3 size. Sidebar will
be displayed on the right and left edges of the screen.
14:9 will display a 4:3 picture at a 14:9 size. A little bit of the
top and bottom edges of the screen will be cut off and sidebar
will be displayed on the right and left edge of the screen.
FULL will display a 4:3 picture at a 16:9 size, with
horizontal elongation necessary to fill the screen.
CINEMA will display a 4:3 picture without changing its
horizontal to vertical ratio to fill the screen. A little bit of the
top and bottom edges of the image will be cut off.
WIDE will expand a 4:3 picture to entire screen with non-
linearity.
<When the video signal is sending HD (High Definition)
video signal...>
FULL will display a picture at 16:9 size as it is.
ZOOM will expand a 16:9 picture without changing its
horizontal to vertical ratio at its maximum size. Some around
image will be cut off.
CINEMA will display a 16:9 picture with vertical
elongation. A little bit of the top and bottom edges of the
image will be cut off.
EXPAND will display a 16:9 picture with horizontal
elongation. Some of the right and left edges of the image will
be cut off.
4:3 14:9
FULL
CINEMAWIDE
FULL
CINEMA
EXPAND
ZOOM
L5950EA(EN).fm Page 13 Friday, March 30, 2007 2:46 PM
14 EN
MAINTENANCE
Picture Screen Cleaning
If the LCD panel should require cleaning, wipe it with a
cotton or soft cloth. Before cleaning the picture screen,
disconnect the power cord.
Service
Should your LCD colour TV become inoperative, do not try
to correct the problem by yourself. There are no user-
serviceable parts inside. Turn the unit off, unplug the power
cord, and take the unit to a Service Centre for servicing.
Cabinet Cleaning
Wipe the front panel and other exterior surfaces of the TV
with a soft cloth immersed in lukewarm water and wrung dry.
Never use a solvent or alcohol. Do not spray insecticide liquid
near the TV. Such chemicals may cause damage and
discoloration to the exposed surfaces.
L5950EA(EN).fm Page 14 Friday, March 30, 2007 2:46 PM
15 EN
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities.
Before arranging for service, check these items. It could save your time and money.
QUICK SERVICE CHECK LIST
PROBL EM
Remote Control Doesn’t Work
Bars On Screen
Picture Distorted
Picture Rolls Vertically
No Colour
Poor Reception on Some Channels
Weak Picture
Lines or Streaks in Picture
Ghosts in picture
Picture Blurred
Sound OK, Picture Poor
Picture OK, Sound Poor
No Picture or Sound
Different colour marks on screen
Black or Luminous point on Screen
POSSIBLE REMEDY
Try a new channel, if OK, then possible station trouble. ××××××××××××
Is TV plugged in?
Power at outlet?
××
Is TV’s STANDBY-ON on? ×
Is antenna connected to terminal on the back of the set? × × × × × ×
If outside antenna is being used, check for broken wire. ×××××××××× ×
Check for local interference. × × × × × × ×
Turn off with STANDBY-ON and then turn it on after about a minute. ×
Adjust COLOUR control. ×
Adjust CONTRAST & BRIGHTNESS control. × ×
Check batteries in Remote Control. ×
Move the TV away from the nearby appliances which have Magnetism.
Turn off using STANDBY-ON, then turn it on again 30 minutes or so later.
×
Temperature around is too low. × × ×
Life of the Back Light is approximately 50,000 hours. Ask the Service Center to replace. × ×
It is quality of the LCD Panel. ×
L5950EA(EN).fm Page 15 Friday, March 30, 2007 2:46 PM
© 2006-2007 FUNAI EUROPE GMBH. All rights reserved.
EN
SPECIFICATIONS
General Specifications
Other Specifications
LCD-A2706 / LCD-A2726 / LCD-B2706 / LCD-B2726 /
LCD-C2706 / LCD-C2707 / LCD-C2717 / LCD-C2726 /
LCD-D2706 / LCD-D2707 / LCD-D2717 / LCD-D2726
LCD-A3206 / LCD-A3207 / LCD-B3206 / LCD-C3206 /
LCD-C3207 / LCD-D3206 / LCD-D3207
Designs and specifications are subject to change without notice
and without our legal obligation.
Television system:
LCD-A2706 / LCD-A3206 /
LCD-A3207 / LCD-A2726: PAL B/G TV standard
LCD-B2706 / LCD-B3206 /
LCD-B2726: PAL I TV standard
LCD-C2706 / LCD-C2707 /
LCD-C3206 / LCD-C3207 /
LCD-C2717 / LCD-C2726: SECAM L/L’ TV standard,
PAL B/G TV standard
LCD-D2706 / LCD-D2707 /
LCD-D3206 / LCD-D3207 /
LCD-D2717 / LCD-D2726: PAL B/G TV standard,
PAL D/K TV standard,
SECAM B/G TV standard,
SECAM D/K TV standard
Channel coverage
Channel Plan
TV Channel
CH
Indication
PAL I PAL B/G SECAM D/K SECAM L
01–10 IRA–IRJ,GAP F1–F10
02–12 E2–E12
13–20
A-H
(only ITALY)
––
21–69 E21–E69
74–78 X, Y, Z, Z+1, Z+2
80–99, 100 S1–S20, GAP
71–86 B–Q
90–106 S4–S20
121–141 S21–S41
142–153
R1–R12
Terminals
S-Video input: Mini DIN 4-pin jack
Video input: RCA connector x 1
Audio input: RCA connector x 2
AUDIO/VIDEO: 21 pin scart jack with RGB Input x 2
Component Audio/
Video input:
pinjack (Y)/1Vpp x 1
pinjack (Pb/Pr)/700 mVpp x 2
RCA connector x 2
HDMI/Audio input: HDMI jack x 1
RCA connector x 2
Stereo Sound System
2 speakers
Sound output: 5 W, 8 ohm x 2
Remote control: Digital encoded infrared light
system
Power requirements: AC220-240 V, 50 Hz
Power consumption: 130 W
LCD: 27"
Dimensions (H x W x D):
(
including the table stand)
507.5 mm x 810 mm x 275 mm
Weight:
(including the table stand)
13 kg
Power consumption: 135 W
LCD: 32"
Dimensions (H x W x D):
(
including the table stand)
589 mm x 956 mm x 325 mm
Weight:
(including the table stand)
16 kg
L5950EA(EN).fm Page 16 Friday, March 30, 2007 2:46 PM
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Funai LCD-D2717 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Funai LCD-D2717 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info