13 EN
Using the VCR Menu
If there are any remaining programmes including Daily,
Everyday, & Weekly, AUTO RETURN will not operate.
1) Press MENU.
2) Press
PLAY/K or STOP/L repeatedly to point to “SET
UP”, then press
F.FW D/B.
3) Press
PLAY/K or STOP/L to point to “AUTO
RETURN”, then press
F.FWD /B.
[ON] will appear next to “AUTO RETURN”.
4) Press
MENU.
Watch the Recorded Timer Programme
Press FUNCTION to turn on the VCR, then press PLAY/K.
Parents Lock
Parents Lock prevents use of the VCR by making the VCR
feature buttons on the VCR and the remote control
inoperative.
The PWR indicator on the display comes on.
1) Press and hold down
FUNCTION on the remote control for
5 seconds until “PL” appears on the display. The Parents
Lock is activated.
When you want to cancel it, press and hold
FUNCTION on
the remote control again for 5 seconds.
When Parents Lock is activated:
• The time will appear on the display. PL will appear on the
display for 2 seconds every minute.
•You may insert a tape. However, the VCR power will
remain off.
• You may press
EJECT A to remove the tape (unless a
Timer Recording is programmed or has finished).
• Timer Recording will take place as scheduled, even if
Parents Lock is activated. “P.L.” will appear steadily on the
TV screen during the Timer Recording.
QUICK-FIND
This function enables you to search and confirm the contents
of the recorded programme(s) using the index mark.
• Use the remote control for this procedure.
• The tape must be fully rewound.
1) Press
QUICK-FIND.
To Skip to the Beginning of Next Programme
1) Press QUICK-FIND.
To View at Normal Speed
1) Press PLAY/K. The Quick-Find is cancelled.
Note: • This function will not operate in the Recording mode.
• When you want to cancel the Quick-Find while in
progress, press STOP/L.
• When the end of a tape is reached during the Quick-
Find, the tape will automatically rewind to the
beginning. After rewinding finishes, the VCR will
eject the tape and turn itself off.
INDEX SEARCH
• The index mark will be made automatically when
REC/OTR is pressed. It will also be marked at the starting
point of Timer Recording and OTR.
• The index mark is not recorded if PAUSE/STILL F is
pressed and released during recording.
• The time gap between index marks on the tape should be
greater than 1 minute for SP recording and 2 minutes for
LP recording.
• Use the remote control for this procedure.
1) Press SEARCH MODE.
2) Press
PLAY/K or STOP/L repeatedly until the number of
programmes that you want to skip appears.
3) Press REW/s or F.FWD/B.
The VCR begins rewinding or fast forwarding to the
beginning of desired programme.
When the preset programme is reached, the VCR will start
playback automatically.
Note: • Index Search can be set up to 20.
• This function will not operate in the Recording mode.
• Operations must be followed up within 30 seconds
from steps 2) to 3), otherwise the Index Search mode
will be cancelled.
• To exit the Index Search mode, press MENU in step 2)
or press STOP/L after step 3).
TIME SEARCH
If a tape includes both programmes recorded in the PAL
system and ones recorded in the NTSC system, this function
may not be operated correctly.
• Use the remote control for this procedure.
1) Press
SEARCH MODE twice.
2) Press
PLAY/K or STOP/L repeatedly until the desired time
appears.
3) Press REW/s or F.FWD/B.
The VCR begins rewinding or fast forwarding to the
specified point.
When 0:00 is reached, the VCR will start playback
automatically.
Note: • Time Search can be set up to 9 hours 59 minutes
(9:59).
• This function will not operate in the Recording mode.
• Operations must be followed up within 30 seconds
from steps 2) to 3), otherwise the Time Search mode
will be cancelled.
• To exit the Time Search mode, press MENU in step 2)
or press STOP/L after step 3).
HM457ED(EN).fm Page 13 Friday, July 1, 2011 10:06 AM
