503501
1
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
1
EN
Contents
UNIT INFORMATION ...................................1
Trademark Information ..............................1
Servicing....................................................1
Cabinet Cleaning.......................................1
Panel Cleaning ..........................................1
Remote Control / TV..................................2
INITIAL SETUP ............................................4
OPERATIONS ..............................................5
Watching a TV Programme .......................5
Favourite ...................................................5
EPG (Electronic Programme Guide) .........5
Sound Select .............................................6
Sleep Timer ...............................................6
Subtitle Settings ........................................6
Teletext Settings........................................6
Switching the Input Mode ..........................6
Recording ..................................................7
Photo Playback .........................................8
PC Format .................................................9
OTHER SETTINGS ....................................10
Channel Settings .....................................10
Picture Adjustment ..................................12
Sound Adjustment ...................................13
Time Settings ..........................................14
Lock Settings...........................................15
Setup Adjustment ....................................16
TROUBLESHOOTING GUIDE...................18
SPECIFICATIONS......................................20
UNIT INFORMATION
Trademark Information
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
HDMI, the HDMI Logo, and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United
States and other countries.
DVB is a registered trademark of the DVB Project.
The “HD TV” Logo is a trademark of
DIGITALEUROPE.
Servicing
Should your unit become inoperative, do not try to
correct the problem by yourself. There are no user-
serviceable parts inside. Take the unit to a Service
Centre for servicing.
Cabinet Cleaning
Gently wipe the front panel and other exterior
surfaces of the unit with a soft cloth.
Never use a solvent or alcohol. Do not spray
insecticide liquid near the unit. Such chemicals may
cause damage and discoloration to the exposed
surfaces.
Panel Cleaning
If the LCD panel should require cleaning, wipe it with
a cotton or soft cloth. Before cleaning the panel,
disconnect the power cord.
22FL532/10 22FL552/10
26FL532/10 26FL552/10
32FL532/10 32FL552/10
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 1 Monday, February 6, 2012 5:30 PM
2
EN
2
Remote Control / TV
1. (Power)
Turns the unit on and go into the standby mode.
2. SLEEP (p. 6)
3. Number buttons
Selects the desired channel in TV mode and
enters the password in the PIN code input field.
4. EXIT (p. 5)
Returns to the previous display.
5. / / / (Cursor) (p. 5)
6. OK
7. MENU (p. 10)
8. AUDIO (p. 6)
9. / (p. 5)
To adjust the volume.
10. (Mute) (p. 5)
11. RED / GREEN / YELLOW / BLUE
Uses for
“EPG (Electronic Programme Guide)” (p. 5) /
“[Programme Edit]” (p. 11).
12. DISPLAY
Display the channel number or input source.
13. SOURCE (p. 6)
14. PICTURE MODE (p. 12)
15. SOUND MODE (p. 13)
16. FAV / FAV (p. 5)
17. FAV (p. 5)
18. EPG
“EPG (Electronic Programme Guide)” (p. 5)
19. (p. 5)
To select a channel.
20. (Play / Pause) / (Skip backward) /
(Skip forward) / (Stop) / (Rewind) /
(Fast-forward)
21. REC (Record)
22. (Subtitle) (p. 6)
23. (Expand) / (Subpage) / (Hold) /
(Text) / (Reveal) / (Index) (p. 6)
15
16
17
18
19
22
14
13
1
2
3
4
6
5
7
8
9
10
11
20
12
23
21
9
1
13719
VOL. / (Front panel) works the same function as /
(cursor) on the menu.
SOURCE (Front panel) works the same function as OK to
determine the setting menu.
PROG. / (Front panel) works the same function as
/ (cursor) on the menu.
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 2 Monday, February 6, 2012 5:30 PM
3
EN
24. CI slot
25. USB terminal (p. 7, 8)
26. Coaxial digital audio output jack
27. PC (VGA) input jack
28. Audio input jack for PC connection
29. (Aerial) input jack
30. Component video, Composite video and
Audio (L/R) input jacks
31. AC power cord inlet
32. SCART jack
33. HDMI (HDMI 1 / HDMI 2) input jack
34. Headphone audio output jack
35. Standby / Power indicator
Lights up red when the unit goes into standby
mode.
Light off when power is on.
36. Infrared sensor window
Receives the infrared rays transmitted from the
remote control.
24
25
26
27
28
31
34
33
35 / 36
30
29
32
Data input from USB flash memory only.
User should not connect any devices to the USB terminal
such as digital camera, keyboard, mouse, etc. (because
these will not work.)
The software update is, in most cases, handled by an
authorised service person or in some circumstances the
user may be asked to do the software update themselves.
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 3 Monday, February 6, 2012 5:30 PM
4
EN
4
INITIAL SETUP
This section will guide you through the unit's initial
setup which includes selecting a language for your on-
screen menu and auto scan, which automatically
scans and memorises viewable channels.
1 After making all the necessary connections, turns
on the unit using the main power switch, then
press .
2 Use / to select the location, then press OK.
3
Use
/
to select
[OSD Language]
, the
n select
the language you want, using / .
4 Use / to select [Auto Tuning], then press
OK.
5 Use / to select [Country], then select the
country you want, using / .
6 Use / to select [Tune type], then select
[DTV], [ATV] or both channel, using / .
7 Press OK to start scanning.
Select [Home Mode], this unit is set to maximise the energy
efficiency for home setting and it can be adjusted through a
choice of picture and sound quality according to your
preference.
Select [Retail Mode], this unit will be set up with predefined
setting for retail displays.
If you select [Retail Mode], the confirm message will
appear.
Scan confirmation menu will appear.
If you press MENU during channel scanning, this operation
will be paused, then press MENU again to exit the initial
setup.
OK
First Time Installation
Home Mode
English
OSD Language
Auto Tuning
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 4 Monday, February 6, 2012 5:30 PM
5
EN
OPERATIONS
Watching a TV Programme
To select a channel
Use repeatedly to select your desired
channel, or use the Number buttons to enter a
channel number, then press OK for quicker access.
(e.g.) If you want to select the channel 24 without
pressing OK, press 2 first, then press 4 within 3
seconds.
To adjust the volume
Use / to adjust the audio volume.
Press to turn on or off the sound right away.
Favourite
You can easily find a favourite channel.
1 Press FAV while watching a programme to show
the favourite channel list.
2 Use / to select the channel you want, then
press OK.
3 Press EXIT to exit.
EPG (Electronic Programme Guide)
For Digital TV operation
You can easily find a channel or see the detailed
channel information. EPG gives you scheduled
information of the TV programme.
1 Press EPG and use / to select a channel.
2 Press EPG to exit.
Read this first
These operations are accessible by remote control.
Some may also be accessible by controls on the main
unit.
You can recover the original volume by pressing again
or / .
You can set favourite channel at “[Programme Edit]” (p. 11).
Use FAV / to select the favourite channel while
watching a programme.
Use / to move to the previous or next page.
OK Fav Menu
Delete Move Skip
Favorite List
DTV
DTV
DTV
DTV
DTV
[Record] (RED) :
Press to call up record list. You can choose the time
of the appointment to record you want.
[Display] (GREEN) :
Press to display the detail information about the
programme.
[Schedule] (YELLOW) :
Press to see the setting you have done before.
[Remind] (BLUE) :
Press to set the time you want to remind the
programme you want to see.
When the time appointment is conflict, it will produce a
warning message.
Record
Move View
Display
Next Day
Schedule
Prev Day
Remind
OK
Jan
Jan
No Information
PROGRAMME GUIDE
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 5 Monday, February 6, 2012 5:30 PM
6
EN
6
Sound Select
For Digital TV operation
Press AUDIO to display currently selected audio
language with the number of available ones and press
repeatedly to cycle through them.
For Analogue TV operation
Press AUDIO to display currently selected audio mode
and press repeatedly to cycle through the available
audio mode.
(e.g.)
Sleep Timer
The sleep timer can be set the unit to go to the standby
mode after an incremental period of time.
1 Press SLEEP repeatedly to change the sleep
time period.
Subtitle Settings
You can change the subtitle settings used for TV
programmes.
1 Press (Subtitle) repeatedly to change the
subtitle language.
Teletext Settings
You can change the teletext settings used for TV
programmes.
1 Press (Text) to turn on the teletext decoder.
2 Press (Text) repeatedly to show the teletext in
transparent mode.
3 Press EXIT to turn off the teletext decoder.
Switching the Input Mode
You can switch the input mode to TV mode or external
input mode.
1 Press SOURCE .
2 Use / to select the input mode you want,
then press OK.
:
Dolby Digital sound
:
Dolby Digital Plus sound
:
HE-AAC sound
no icon :
MPEG sound
NICAM STEREO Mono
NICAM MONO Mono
Stereo Mono
DUAL I DUAL II
Mono
Each time you press SLEEP, the timer increases from
10 minutes up to 240 minutes.
Press SLEEP repeatedly until [Off] appears to cancel the
sleep timer.
If the unit goes into standby mode, the sleep timer will be
cancelled.
NICAM DUAL I NICAM DUAL II Mono
To enlarge fonts, press .
To select the teletext subpages, press .
To directly select the page numbers shown at the bottom of
the TV screen, use RED / GREEN / YELLOW / BLUE.
To call up the hidden information, press .
To hold the current page, press .
To go back to the start page, press .
[Component] will be displayed if you connected
component video cables to this unit.
OK
HDMI2
HDMI1
SCART
Component
PC
AV
ATV
DTV
Media
Input Source
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 6 Monday, February 6, 2012 5:30 PM
7
EN
Recording
This unit can record a TV programme. Use a USB flash
memory for saving the data.
1 Press SOURCE to display the input mode
and use / to select [DTV], then press OK.
Record
2 Select the channel you want, then press REC to
start recording the current programme.
3 Press to stop the recording.
Playback
2 Press (index) to call up the recorded list.
3 Use / to select the desired file, then press
OK to start the playback.
Operation in Playback
Press OK to display the menu.
4 Press SOURCE and select input mode you
want to exit this mode.
Before you begin
You must connect the USB flash memory to USB
terminal of this unit (shown below) and select [DTV]
at [Input Source]. Refer to “Switching the Input
Mode” (p. 6).
The USB flash memory is not supplied with this unit.
The unit recognise a USB flash memory only.
Do not use a USB hub and an extension cord between the
USB flash memory and the unit.
Always connect the USB flash memory to this unit directly.
We do not guarantee the all USB flash memory can be
supported on this unit.
When you stop the recording, it will return to normal
broadcast television.
When the storage space of Disk is shortage, it will appear a
warning message. Then it stops recording automatically
and return to normal broadcast television.
Play FB FF Prev. Next Pause Stop
:
Press to play or pause the playback.
/ :
Press to rewind or fast-forward the playback.
Every press on / will rewind or fast-forward
faster up to five.
/ :
Press to skip backward or forward the file.
:
Press to stop the playback.
EXIT:
Press to disappear the menu during the menu
appears.
Recorded List
OK Index
Delete Skip
Programme
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 7 Monday, February 6, 2012 5:30 PM
8
EN
8
Photo Playback
This unit can play JPEG picture files. Use the USB
flash memory contains the files.
1 Press SOURCE to display the input mode
and use / to select [Media], then press OK.
2 Press OK to enter [PHOTO], and select [C], then
press OK to enter.
3 Use / / / to select the desired file, then
press OK.
4 Press OK to display the menu during the
slideshow.
Operation in Slideshow
5 Press SOURCE and select input mode you
want to exit this mode.
Before you begin
You must connect the USB flash memory to USB
terminal of this unit (shown below) and select [DTV]
at [Input Source]. Refer to “Switching the Input
Mode” (p. 6).
The USB flash memory is not supplied with this unit.
The unit recognise a USB flash memory only.
Do not use a USB hub and an extension cord between the
USB flash memory and the unit.
Always connect the USB flash memory to this unit directly.
We do not guarantee the all USB flash memory can be
supported on this unit.
Return
PHOTO
Delete
Return
Exit
PHOTO
Use / to select [Zoom In] or [Zoom Out] and press
OK.
The zoom factor: 1x, 2x and 4x
Use / to select [Playlist] and press OK to display the
list.
Use / to select [Info.] and press OK to display the
information.
Use / to select [Move View] and press OK to move
the picture, if the picture big enough to surpasses the
screen.
:
Press to play or pause the slideshow.
/ :
Press to skip backward or forward the file.
:
Press to stop the slideshow.
[Repeat] (YELLOW) :
Press to select the repeat mode; [Repeat None],
[Repeat 1] or [Repeat All] in order.
[Rotate] () :
Every press on will turn the picture clockwise by
90 degrees.
EXIT:
Press to go back to the previous screen.
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 8 Monday, February 6, 2012 5:30 PM
9
EN
It is supported that files to be played back in this unit
are recorded under the following specifications:
PC Format
The following signals can be displayed.
Funai cannot be held responsible if your USB flash memory
is not supported, nor will Funai accept any liability for
damage or loss of stored data.
A USB flash memory that required its own driver or the
device with a special system such as fingerprint recognition
are not supported.
Be sure to keep a backup copy of the original files on your
device before you play them back on this unit. We have no
responsibilities for damage or loss of your stored data.
To avoid damaging the USB flash memory and the unit
always turn off the unit before you remove the USB flash
memory.
This unit is not allowed to use the USB flash memory which
requires external power supply (500 mA or more).
This unit can be recognised up to 60,000 files in the USB
flash memory.
This unit may not be recognised if the length of the file
names is too long. Only English characters can be
recognised.
This unit does not support MTP(Media Transfer Protocol) or
the file other than FAT, FAT32 and NTFS file system. If the
file is not supported, error message appears.
When the unit does not recognise the USB flash memory,
try reconnecting it.
This unit cannot play back a file which go over the limit of
file restriction.
JPEG :
Baseline 8,192 x 8,192
Progressive 1,024 x 768
Format Resolution Refresh rate
VGA
720 x 400 70Hz
640 x 480
60Hz
72Hz
75Hz
SVGA
800 x 600
60Hz
72Hz
75Hz
XGA
1,024 x 768
60Hz
70Hz
75Hz
SXGA
1,280 x 768 60Hz
WXGA
1,360 x 768 60Hz
Other formats or non-standard signals will not be displayed
correctly.
Please use the VGA cable that has a ferrite core.
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 9 Monday, February 6, 2012 5:30 PM
10
EN
10
OTHER SETTINGS
Some settings need to enter PIN code, refer to “Lock
Settings” (p. 15).
Channel Settings
You can edit the channel settings.
1 Use / to select [CHANNEL].
[Auto Tuning]
You can scan the DTV, ATV or both channel in your
area automatically.
2 Use / to select [Auto Tuning], then press
OK.
3 Use the Number buttons to enter the 4-digit PIN
code you set.
4 Use / to select [Country], then select the
country you want, using / .
5 Use / to select [Tune type], then select
[DTV], [ATV] or both channel, using / .
6 Press OK to start scanning.
[ATV Manual Tuning]
For Analogue TV operation
You can search ATV channel manually in your area.
2 Use / to select [ATV Manual Tuning], then
press OK.
3 Use the Number buttons to enter the 4-digit PIN
code you set.
4 Use / to select [Current CH], then use /
to select the channel you want.
5 Use / to select [Sound System], then use
/ to select the system you want.
6 Use / to select [Fine-Tune], then use /
to adjust the setting.
7 Use / to select [AFC], then use / to
select [On] or [Off].
8 Use / to select [Search], then press OK to
start scanning.
[DTV Manual Tuning]
For Digital TV operation
You can search DTV channel manually in your area.
2 Use / to select [DTV Manual Tuning], then
press OK.
3 Use the Number buttons to enter the 4-digit PIN
code you set.
4 Use / to select the channel you want, then
press OK to start scanning.
Read this first
Before adjust each setting, press MENU to display the
menu.
To exit the menu, press MENU.
When the scanning is completed, the lowest memorised
digital or analogue channel will be displayed.
If you press MENU during the scanning, this operation will
be stopped and the lowest memorised channel will be
displayed.
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
Programme Edit
Signal Information
CI Information
CHANNEL
Move SelectReturn Exit
If you set to [On], this unit adjust tuning to near channel
automatically.
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 10 Monday, February 6, 2012 5:30 PM
11
EN
[Programme Edit]
For Digital TV operation
You can edit the programme settings.
2 Use / to select [Programme Edit], then
press OK to enter programme edit list.
[Signal Information]
For Digital TV operation
You can see the detail information about the signal.
2 Use / to select [Signal Information], then
press OK.
[CI Information]
For Digital TV operation
You can see the detail information about the Common
Interface, if you have inserted the CI card.
2 Use / to select [CI Information], then press
OK.
You can check favourite channel list at “Favourite” (p. 5).
[Delete] (RED) :
Press to delete the current channel.
[Move] (YELLOW) :
Press and use / to move the current channel.
[Skip] (BLUE) :
Press to skip the current channel.
[Fav] (FAV) :
Press to set a favourite channel.
We do not guarantee the all cards can be supported on this
unit.
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 11 Monday, February 6, 2012 5:30 PM
12
EN
12
Picture Adjustment
You can adjust the picture settings according to your
personal preference.
These settings are automatically stored after exiting
the picture menu.
1 Use / to select [PICTURE].
[Picture Mode]
2 Use / to select [Picture Mode], then press
OK.
3 Use / to select [Dynamic], [Standard],
[Mild], or [Personal], then press OK.
[Contrast] / [Brightness] / [Colour] / [Tint] /
[Sharpness]
2 Use / to select the item you want, then
press OK, and then appear the setting display,
adjust the setting, using / .
[Colour Temp]
You can change the colour tone of the picture.
2 Use / to select [Colour Temp], then press
OK.
3 Use / to select [Cold], [Normal] or [Warm],
then press OK.
[Noise Reduction]
You can adjust to reduce the appearance of digitising
error caused by the compression.
2 Use / to select [Noise Reduction], then
press OK.
3 Use / to select [Off], [Low], [Middle],
[High] or [Default], then press OK.
[Backlight]
You can adjust backlight brightness.
2 Use / to select [Backlight], then press OK,
and then appear the setting display, adjust the
setting, using / .
You can change picture mode easily using PICTURE
MODE.
Press PICTURE MODE repeatedly to select picture mode
you want. In this function, you can set also assign the
picture mode individually to each input mode.
You can adjust the settings, if you set [Personal] in
[Picture Mode].
Move SelectReturn Exit
Picture Mode
Contrast
Brightness
Colour
Tint
Sharpness
Colour Temp
Noise Reduction
Backlight
PICTURE
Standard
Normal
Middle
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 12 Monday, February 6, 2012 5:30 PM
13
EN
Sound Adjustment
You can adjust the sound settings according to your
personal preferences.
1 Use / to select [SOUND].
[Sound Mode]
2 Use / to select [Sound Mode], then press
OK.
3 Use / to select [Standard], [Music],
[Movie], [Sports], or [Personal], then press OK.
[Treble] / [Bass] / [Balance]
You can set left / right speaker setting.
2 Use / to select the item you want, then
press OK, and then appear the setting display,
adjust the setting, using / .
[SPDIF Mode]
2 Use / to select [SPDIF Mode], then select
[PCM], [Auto] or [Off], using / .
[AD Switch]
For Digital TV operation
You can adjust audio output setting and volume for
visually impaired.
2 Use / to select [AD Switch], then select
[Off] or [On], using / .
.
You can change sound mode easily using SOUND MODE.
Press SOUND MODE repeatedly to select sound mode you
want.
You can adjust [Treble] and [Bass] settings, if you set
[Personal] in [Sound Mode].
Sound Mode
Treble
Bass
Balance
Auto Volume
SPDIF Mode
AD Switch
Standard
Off
PCM
Off
SOUND
Move SelectReturn Exit
[PCM] :
PCM
[Auto] :
Dolby Digital (if available)
Only MPEG sound is available for this function.
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 13 Monday, February 6, 2012 5:30 PM
14
EN
14
Time Settings
You can change Time setting.
1 Use / to select [TIME].
[Time Zone]
You can set the time zone according to the resident
area.
2 Use / to select [Time Zone], then press OK.
3 Use / / / to select the time you want,
then press OK.
[Sleep Timer]
The sleep timer can be set the unit to go to the standby
mode after an incremental period of time.
2 Use / to select [Sleep Timer], then press
OK.
3 Use / to select the time you want, then
press OK.
[Auto Standby]
You can set the time to go into standby mode
automatically as no activity is detected after power is
turned on.
In spite of this setting, the unit goes into standby mode
automatically if there is no signal input from the
antenna terminal and no user operation for 15 minutes.
2 Use / to select [Auto Standby], then press
OK.
3 Use / to select the time you want, then
press OK.
[OSD Timer]
You can set the OSD displaying time during no activity
is detected after press MENU.
2 Use / to select [OSD Timer], then press
OK.
3 Use / to select the time you want, then
press OK.
[Clock] will change with the area which you have selected
in the Time Zone.
Although you select [Auto], the correct time may not be
displayed on the “Sleep Timer” (p. 6) depending on DTV
broadcasting.
You can set also buttons on Remote Control, refer to “Sleep
Timer” (p. 6).
Clock
Time Zone
Sleep Timer
Auto Standby
OSD Timer
Jul
GMT+1
Off
4 H
15 S
TIME
Move SelectReturn Exit
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 14 Monday, February 6, 2012 5:30 PM
15
EN
Lock Settings
You can change Lock setting.
1 Use / to select [LOCK].
[Lock System]
You can proceed Parental setting, if you enter your PIN
code.
2 Use / to select [Lock System], then press
OK.
3 Use the Number buttons to enter the 4-digit PIN
code you set.
[Set Password]
You can set your own PIN code.
2 Use / to select [Set Password], then press
OK.
3 Use the Number buttons to enter the new 4-digit
number.
4 Use the Number buttons to enter the same
4-digit number again.
[Block Program]
2 Use / to select [Block Program], then
press OK.
3 Press GREEN to lock the current channel.
[Parental Guidance]
You can set the parental rating to avoid watching an
inappropriate programme for your children.
2 Use / to select [Parental Guidance], then
press OK.
3 Use / to select the age restriction, then
press OK.
[Key Lock]
If you set to [On], you cannot use the buttons on the
unit.
2 Use / to select [Key Lock], then select [On]
or [Off], using / .
If you have not set up your PIN code as France, enter 0001.
If you have not set up your PIN code as other country, enter
0000.
When you enter correct PIN code, you can change following
settings.
After you move to other settings, you have to enter your PIN
code again to proceed Parental setting.
Lock System
Set Password
Block Program
Parental Guidance
Key Lock
Off
Off
Off
LOCK
Move SelectReturn Exit
Please enter password
Clear Cancel
To unlock programme, input the PIN code you set.
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 15 Monday, February 6, 2012 5:30 PM
16
EN
16
Setup Adjustment
You can change other setting.
1 Use / to select [SETUP].
[OSD Language]
You can select the preferred on-screen language.
2 Use / to select [OSD Language], then
press OK.
3 Use / / / to select the language you
want, then press OK.
[TT Language]
You can select the preferred teletext language.
2 Use / to select [TT Language], then press
OK.
3 Use / / / to select the language you
want, then press OK.
[Hearing Impaired]
You can set Hearing Impaired mode.
2 Use / to select [Hearing Impaired], then
select [On] or [Off] using / .
[Hearing Impaired]:
Provides audio service for hearing impaired.
[PVR File System]
You can check the USB speed.
2 Use / to select [PVR File System], then
press OK.
[Aspect Ratio]
You can change TV Screen Display mode.
2 Use / to select [Aspect Ratio], then press
OK.
3 Use / to select the display mode you want,
then press OK.
Available options are below.
You can set also buttons on Remote Control, refer to
“Teletext Settings” (p. 6).
SETUP
OSD Language
TT Language
Hearing Impaired
Aspect Ratio
First Time Installation
Reset
CEC
Software Update(USB)
English
West
Off
16:9
Off
Move SelectReturn Exit
[ATV], [DTV], [AV], [SCART]:
[Auto], [4:3], [16:9], [Zoom1], [Zoom2]
[PC]:
[4:3], [16:9]
[Component]:
[4:3], [16:9], [Zoom1], [Zoom2]
[HDMI]:
[4:3], [16:9], [Zoom1], [Zoom2], [Just Scan]
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 16 Monday, February 6, 2012 5:30 PM
17
EN
[First Time Installation]
This section will guide you through the unit's initial
setup which includes selecting a language for your on-
screen menu and auto scan, which automatically
scans and memorises viewable channels.
2 Use / to select [First Time Installation],
then press OK.
3 Use / to select the location, then press OK.
4
Use
/
to select
[OSD Language]
, the
n select
the language you want, using / .
5 Use / to select [Auto Tuning], then press
OK.
6 Use / to select [Country], then select the
country you want, using / .
7 Use / to select [Tune type], then select
[DTV], [ATV] or both channel, using / .
8 Press OK to start scanning.
[Reset]
You can restore the all settings except channel setting
and parental lock settings.
2 Use / to select [Reset], then press OK.
3 Press to select [Yes] to reset to default
settings.
[CEC]
If you set to [On], HDMI CEC function allows your
device to act in conjunction with this unit.
2 Use / to select [CEC], then select [On] or
[Off], using / .
[Software Update(USB)]
It is available to update software using USB.
2 Use / to select [Software Update(USB)],
then press OK.
Select [Home Mode], this unit is set to maximise the energy
efficiency for home setting and it can be adjusted through a
choice of picture and sound quality according to your
preference.
Select [Retail Mode], this unit will be set up with predefined
setting for retail displays.
If you select [Retail Mode], the confirm message will
appear.
Scan confirmation menu will appear.
If you press MENU during channel scanning, this operation
will be paused, then press MENU again to exit the initial
setup.
OK
First Time Installation
Home Mode
English
OSD Language
Auto Tuning
After you select [Yes], the unit go into standby and turns on
automatically.
Your device must be compatible with HDMI CEC in order to
use this function.
We do not guarantee the all devices can be supported on
this unit.
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 17 Monday, February 6, 2012 5:30 PM
18
EN
18
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked
possibilities.
Before arranging for service, check these items. It could save you time and money.
Problem Possible Remedy
Remote control does not work
Is unit plugged in?
Power at outlet?
Check batteries in remote control.
Bars on TV screen
If outside antenna is being used, check for broken wire.
Check for local interference.
Picture distorted
Try a new channel, if OK, then possibly due to poor channel reception.
If outside antenna is being used, check for broken wire.
Surrounding temperature is too low.
Picture rolls vertically
Try a new channel, if OK, then possibly due to poor channel reception.
If outside antenna is being used, check for broken wire.
Check for local interference.
No colour
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Adjust [Colour] control.
Poor reception on some channels
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Check for local interference.
Weak picture
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Adjust [Contrast] and [Brightness] control.
Surrounding temperature is too low.
Lines or streaks in picture
Try a new channel, if OK, then possibly due to poor channel reception.
If outside antenna is being used, check for broken wire.
Check for local interference.
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 18 Monday, February 6, 2012 5:30 PM
19
EN
Ghosts in picture
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Check for local interference.
Picture blurred
Try a new channel, if OK, then possibly due to poor channel reception.
If outside antenna is being used, check for broken wire.
Sound OK, picture poor
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Check for local interference.
Adjust [Contrast] and [Brightness] control.
Picture OK, sound poor
Try a new channel, if OK, then possibly due to poor channel reception.
Check for local interference.
No picture or sound
Try a new channel, if OK, then possibly due to poor channel reception.
Is unit plugged in?
Power at outlet?
Is unit’s power on?
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Unplug the AC power cord and wait for about 1 minute, then plug the AC
power cord and turn on the unit again.
Different colour marks on TV screen
Try a new channel, if OK, then possibly due to poor channel reception.
Black or luminous point on TV screen
It is quality of the LCD Panel.
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 19 Monday, February 6, 2012 5:30 PM
20
EN
20
SPECIFICATIONS
Terminals
LCD
21.6 inches (22FL532/10, 22FL552/10)
26 inches (26FL532/10, 26FL552/10)
31.5 inches (32FL532/10, 32FL552/10)
Television system
DVB-T(MPEG2/MPEG4-H.264), PAL-B/G, D/K, SECAM-B/G, D/K, L
(22FL532/10, 26FL532/10, 32FL532/10)
DVB-T/C(MPEG2/MPEG4-H.264), PAL-B/G, D/K, SECAM-B/G, D/K, L
(22FL552/10, 26FL552/10, 32FL552/10)
Sound output
1.5 W, 8 × 2(22FL532/10, 22FL552/10)
10 W, 8 × 2 (26FL532/10, 26FL552/10)
10 W, 8 × 2 (32FL532/10, 32FL552/10)
Remote control Digital encoded infrared light system
Operating temperature 5 °C to 40 °C
Power requirements
AC 220-240 V ~ , 50 Hz (22FL532/10, 22FL552/10)
AC 220-240 V ~ , 50 Hz (26FL532/10, 26FL552/10)
AC 220-240 V ~ , 50 Hz (32FL532/10, 32FL552/10)
Power consumption
28 W (standby: less than 0.5 W) (22FL532/10, 22FL552/10)
40 W (standby: less than 0.5 W) (26FL532/10, 26FL552/10)
42 W (standby: less than 0.5 W) (32FL532/10, 32FL552/10)
Antenna UHF/VHF 75
Audio input RCA jack x 2 (L/R)
Composite video input RCA jack ×1
Component video input RCA jack ×3 (Y/Pb/Pr)
HDMI input HDMI 19pin x 2
PC input D-Sub 15pin x 1 (RGB) / Mini jack Ø3.5 mm x 1 (Audio)
SCART SCART x 1
Headphone audio output Mini jack Ø3.5 mm x 1
Coaxial digital audio output RCA jack × 1
USB terminal
USB × 1
Common Interface CI slot × 1
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 20 Monday, February 6, 2012 5:30 PM
21
EN
Protruding parts excluded.
Dimensions
without base
H:347.0 mm / W:531.0 mm / D:51.0 mm (22FL532/10, 22FL552/10)
H:403.8 mm / W:634.4 mm / D:56.5 mm (26FL532/10, 26FL552/10)
H:473.5 mm / W:755.0 mm / D:56.5 mm (32FL532/10, 32FL552/10)
Dimensions
with base
H:384.4 mm / W:531.0 mm / D:135.5 mm (22FL532/10, 22FL552/10)
H:447.9 mm / W:634.4 mm / D:180.2 mm (26FL532/10, 26FL552/10)
H:517.6 mm / W:755.0 mm / D:180.2 mm (32FL532/10, 32FL552/10)
Weight
without base
3.62 kg (22FL532/10, 22FL552/10)
5.21 kg (26FL532/10, 26FL552/10)
6.88 kg (32FL532/10, 32FL552/10)
Weight
with base
3.80 kg (22FL532/10, 22FL552/10)
5.60 kg (26FL532/10, 26FL552/10)
7.27 kg (32FL532/10, 32FL552/10)
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 21 Monday, February 6, 2012 5:30 PM
22FL532/10 22FL552/10
26FL532/10 26FL552/10
32FL532/10 32FL552/10
★★★★★
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 22 Monday, February 6, 2012 5:30 PM
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Funai 26FL532 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Funai 26FL532 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Funai 26FL532

Funai 26FL532 Gebruiksaanwijzing - Deutsch - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info