617420
17
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
System
Operating Manual
ESPRIMO C7xx / C9xx
Thank you for buying an inno
vative product from Fujitsu.
Latest information abo
ut our products, useful tips, upda tes etc. is available
on our website: "
http:
//www.fujitsu.com/fts/"
You can nd driver upda
tes at: "
http://support.ts.fujitsu.com/download"
Should you have any te
chnical questions, please contact:
our Hotline/Service
Desk (see Service D esk list or from the Internet at:
"
http://support.t
s.fujitsu.com/c ontact/servicedesk")
Your sales partner
Your sales ofce
We hope you enjoy using your new Fujitsu system!
Published by / Contact address in the EU
Fujitsu Te
chnology Solutions GmbH
Mies-van-der-Rohe-Straße 8
80807 Munich, Germany
"
http://
www.fujitsu.com/fts/"
Copyright
©Fujits
u Technology Solutions GmbH 2013. All rights reserved.
Publication Date
07/2013
Order No.: A26361-K1014-Z320-2-7619, edition 3
ESPRIMO C7xx / C9xx
Operating Manual
Your ESPRIMO 5
Important notes 7
Getting started 11
Operation 22
Troubleshooting and tips 28
System expansions 32
Technical data 53
Index 54
Remarks
Information on the product d e scription meets the design specications of Fujitsu and
is provided for comparison purposes. Several factors may cause the actua l results to
differ. Technical data is subject to change without prior notica tion. Fujitsu rejects any
responsibility with r egard to technical or editorial mistakes or o m issions.
Trad em arks
Fujitsu, the Fujitsu logo and ESPRIMO are registered trademarks of Fujitsu Limited or its
subsidiaries in the United S ta tes of America and other countries.
PS/2 is a registered trademark of International Business Machines, Inc.
Pentium is a registered trademark of Intel Corporation, USA.
Kensington, MicroSaver and K-Slot are registered trad emarks of ACCO Brands.
Microsoft and Window s are trademarks or registered trademarks of the Microsoft
Corporation in the United Sta tes and/or other countries.
All other trademarks specied here are the property of their respective owners.
Copyright
No part of this publication may be copied, reproduced or translated without
the prior written consent of Fujitsu.
No part of this publication may be saved or transferred by any electronic means
without the written approval of Fujitsu.
Contents
Contents
YourESPRIMO ......................................................................... 5
Validityof the Reference Manual ......................................................... 5
Notational conventions .................................................................. 6
Importantnotes ........................................................................ 7
Safetyinformation ....................................................................... 7
Transporting the device
..................................................................
7
Cleaning thedevice ..................................................................... 8
Energy saving, disposa
landrecycling ....................................................
8
CEmarking ............................................................................ 9
FCC Compliance Stat em
ent .............................................................
10
FCC Class B Comp liance
Statement ..................................................
10
FCC Radiation E xposu
reStatement ..................................................
10
Gettingstarted ......................................................................... 11
Unpacking and checking the delivery . . ................................................... 11
Stepsforinitialsetup .................................................................... 11
Setting up thedevice .................................................................... 12
Ve rtical operating position ( optional) . . . . . . ............................................ 13
Horizontal operating position with rubber/plastic feet . . . . . . ............................. 14
Connecting the device to the mains voltage . . . ............................................ 15
Connecting external devices . . ........................................................... 16
Connecting the cables . .............................................................. 16
Disconnecting the cables . . . . . ....................................................... 16
Portson thedevice .................................................................. 17
Connecting a monitor . . . . . ........................................................... 17
Connecting the mo use . . . . ........................................................... 18
Connecting the keyboard . ........................................................... 18
Connecting extern al devices to the parallel (optional) or serial port . ..................... 19
Connecting extern al devices to the USB ports . ........................................ 19
Switchingonforthersttime:installingthesoftware ....................................... 20
Switchon themonitor andthe machine ............................................... 20
Installingthe software ............................................................... 21
Operatio
n ..............................................................................
22
Switch th
edevice on ....................................................................
22
Switchi
ngoffthedevice .................................................................
22
Indicat
orson thedevice .................................................................
23
Keyboar
d ...............................................................................
24
Import
ant keys and keyboard shortcuts . . . . ............................................
24
Settin
gsin BIOSSetup ..................................................................
25
Prope
rtyand dataprotection .............................................................
26
Anti-
theftprotection ..................................................................
26
BIOS s
etupsecurity functions ........................................................
26
Acce
ss authorization via SmartCard (optional) . ........................................
27
Troubleshootingandtips .............................................................. 28
Helpif problems occur ................................................................... 28
Troubleshooting . . . ...................................................................... 28
Power-on indicat or does not light up after the device is switched on ..................... 28
The d evice cannot be switched off with the ON/O F F switch. . . . ......................... 29
Monitorremainsblank ............................................................... 29
Fujitsu 3
Contents
Nomousepointerdisplayedon thescreen ............................................ 30
Time and/or date is not correct . . . . . . ................................................. 30
Errormessageson thescreen ........................................................ 30
Installingnewsoftware .................................................................. 30
Restoring thehard diskcontents ......................................................... 30
Tips .................................................................................... 31
Systemexpansions .................................................................... 32
Information about boards ................................................................ 33
Opening the casing . . ................................................................... 34
Closingthe casing ...................................................................... 35
Overview ofthedrive baysand drivesin yourdevice ....................................... 35
Installingandremoving plasticdrive covers ............................................... 36
Removing theplastic drivecover ..................................................... 36
Installingthe plasticdrive cover ...................................................... 37
Installingandremoving thedrivecage .................................................... 37
Removing thedrivecage ............................................................ 37
Installingthe drivecage .............................................................. 38
Installing and removing the accessible 5
1
/
4
inchdrive ...................................... 38
Removing anaccessible drive ....................................................... 38
Installingan accessibledrive ........................................................ 39
Installingandremoving theharddisk drive ................................................ 40
Removing thehard diskdrive ........................................................ 40
Installingthe harddisk drive .......................................................... 41
Installing and removing a Compact Flash module (optional) . . .............................. 43
Installingthe CompactFlashmodule .................................................. 43
Removing theCompact Flashmodule ................................................. 44
Installing/removing a SmartCard reader (optional) ......................................... 45
Installing t h e SmartC ard reader . . . . . . ................................................. 45
Removing t he SmartCard reader . . . . ................................................. 45
Installing and removing a WLAN m od ule (optional) ......................................... 46
Installing t he WLAN module . . ........................................................ 46
Removing the WLAN module . ........................................................ 47
Installing and removing a board . . ........................................................ 47
Installing a board . . . . ................................................................ 48
Removing boards ................................................................... 49
Installing and removing heat sinks ........................................................ 50
Removing the heat sink . . ............................................................ 50
Installing t he heat sink . . . ............................................................ 50
Mainboard expansions . . ................................................................ 51
Upgrading mainmemory ............................................................. 51
Processor, replacing ................................................................. 51
Replacing thelithium battery ......................................................... 52
Technicaldata ......................................................................... 53
Index .................................................................................. 54
4 Fujitsu
Your ESPRIMO
Your ESPRIMO
Overview
... is available with various conguration levels which differ in terms of hardware and software
equipment. You can install additional drives (for exa m ple a D V D drive) and other boards.
This manual tells yo u how to start using your device and how to operate it in daily u se.
This manual applies for all c onguration levels. Depending on the chosen conguration
level, some of the hardware components described may not be ava ilable on y our PC.
Please also read the notes about your operating system.
Depending on the conguration selected, the operating system is preinsta lled
on your hard disk (e.g. Windows).
Further information on t his device is provided:
in the "Quick Start Guide" po ster
in the "Safety/regul
ations" manual
in the "Warranty" manu al
in the op erating ma
nual for the monitor
in the manual for the mainboard
in your operating
system d ocumentation
in the information les (e.g. *.PDF, *.H T ML, *.DOC, *.CHM , *.TXT, *.HLP)
Some of the manuals listed can be found in electronic form on the "Drivers & Utilities" DVD.
You can access and view the requ ired information using the Acrobat Reader
program, w hich is also included on the DVD. You can of course also
print o ut a copy of the manual if you prefer.
ValidityoftheReferenceManual
This Reference Manual is valid for the following systems:
ESPRIMO C700
ESPRIMO C710
ESPRIMO C720
ESPRIMO C910-L
Fujitsu 5
Your ESPRIMO
Notational conventions
Pay particular attention to text marked with this symbol. Fa ilure to observe
these warnings could p ose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective throu gh failure to observe these warnings.
Indicates important informa
tion for the proper use of the device.
Indicates an activity that must be performed
Indicates a result
This font
indicates data entered
using the keyboard in a pro gram d ialogue or at
the command line, e .g.
your password (Name123) or a command used to
start a program (star
t.exe)
This font
indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font
indicates
terms and texts used in a software interface, e.g.: Click on Save
names of programs or les, e.g. Windows or setup.exe.
"This font"
indicates
cross-references to another section, e.g. "Safety information"
cross-references to an external s ource, e.g. a web address: For more
information, go to "
http://www.fujitsu.com/fts"
Names of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" m anua l
Key
indicates a key on the keyboard, e.g:
F10
This font
indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off th e d evice
6 Fujitsu
Important notes
Important notes
ImportantnotesNotes
In this chapter you will nd information regarding safety which it is essential to
take note of when working with your device.
Safety information
SafetyinformationNote
Please note the informat
ion provided in the "Safety/regulations" manual
and in the following safe
ty notes.
When installing and ope
rating the device, please observe the notes on
environmental conditi
ons in Chapter "
Technical data", Page 53 as well as
the instructions i n Cha
pter "
Getting started", Page 11 .
When setting up the dev
ice, make sure there is clearance all around it so that
thecasingreceives
enough ventilation. In order to avoid overheating, do not
cover the ventilati
on are as of the mon itor or the device.
You m ust on ly opera
te the device if the rated voltage used by the
device is set to the
local mains voltage.
The main switch (if
present) and the ON/OFF switch do not disconnect the
device from the ma
ins voltage. To completely disconnect from the mains
voltage, remove t
he pow er plug from the power socket.
Only opera te th
e device w ith the casing closed.
Replace the lit
hium battery o n the mainboard in accordance with the instructions
in "
Replac ing t
he lithium battery", Page 52.
Caution, comp
onents in the system can get very hot.
The activiti
es described in these instructions must always be
performed wi
th the greatest care.
Repairs to th
e device must only be performed by qualied technicians.
Incorrect r
epairs could put the user at great risk or cause serious dam age
to the equi
pment (electric shock, risk of re).
Transpor
ting the device
Device,Transp o
rtation
Retrans
portation
Transport all parts separa tely in their original packaging or in a packaging which
protects them from knocks and jolts, t o the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
Fujitsu 7
Important notes
Cleaning the device
Device,Transpor tationRetransportationSystemunit, seeDevice
Turn off all power and equipment switches and disconnect the pow er
plug from the mains outlet.
Do not clean any interior pa rts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrod e
plastic (alcohol, thinner or acetone).
Never clean the device with water! Water enterin g into th e device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
The surface can be clea
ned with a dry cloth. If particularly dirty, use a cloth that has been
moistened in mild dome
stic detergent and then carefully wrung out.
Use disinfectant wi
pes to clean the keyboard and the mouse.
Energy saving, disposal and recycling
DisposalEnergysavingRecyclingDrivers&UtilitiesDVDUserDocumentationDVD
You can nd information on these subjects on the "Drivers & Utilities" DVD or on our
website ("
http://www.fujitsu.com/fts/about/fts/ environment-care/").
8 Fujitsu
Important notes
CE marking
CEmarkingCEmarkingNotesElectromagneticcompatibilityLowvoltagedi rective
The shipped version of this device complies with the requirements of European U nion
directives 2004/108/EC "Electromagnetic compatibility", 2006/95/EC "Low voltage directive" and
2009/125/EC "Ecodesign".
CE marking for devices with radio component
This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament
and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment
and mutual recognition of conformity.
The CE marking valid for your device can be found on the device label.
Explanation: CE nnnn (!); nnnn denes the type of CE marking and the exclamation mark indicates
a device with radio components.
You can nd more information and declarations of c onfo rmity on the Internet at:
"
http://globalsp.t s.fujitsu.com/sites/cert icates".
This equipment can be used in the following countries:
Belgium Bulgaria Denmark
Germany
Estonia Finland France
Greece
UK Ireland Iceland Italy
Croatia
Latvia Liechtenstein Lithuania
Luxembourg Malta Netherlands Norway
Austria Poland Portugal Rumania
Sweden Switzerland Slovakia Slovenia
Spain Czech Republic
Hungary
Cyprus
Contact the corresponding government ofce in the respective country for cu rrent information on
possible operating restrictions. If your country is not included in the list, then please contact
the corresponding supervisory authority as to whether the use of this product is permitted in
your country.
Fujitsu 9
Important notes
FCC Compliance Statement
If th e device complies with the FCC regulations, the FCC s ign can be found on the type rating plate.
FCC Class B Compliance State
ment
DOC (INDU STRY CANA DA) NOTICES
Notice to Users of Radios and Television:
This class B digital a pparat us complies with Canadian I CES-003.
The following statement applies to the pro duct s covered in this m anual, unless o therwise specied
herein. The statement for other products will appear in the accompanying documentation.
NOTE:
This equipment has been tested and found to comply with the limits for a "Class B" digital
device, pursuant to Part 15 of the FCC rules and meets all require ments of th e Canadian
Interference-Causing E quipment Standard ICES-003 for digital app aratus. These limits are
designed to provide reasonable protection against harmful interference in a residen tial installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in strict accordance with the instructions, may cause harmful interference to radio
communications. However, there is no gu arantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to r adio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the s
eparation between equipment and the rece iver.
Connect the equipment into an outlet on a circuit different from th at to
which the receiver is connected.
Consult the d
ealer or an experienced radio/TV technician for help.
Fujitsu is not responsible for any radio or tel evision interference caused by unauthorized
modications of this equipment or the substitution or attachment of connecting cables and
equipment other than those specied by Fujitsu. The c orrection of interferences caused by such
unauthorized mod ication, substitution or attachment will be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any and all optional
peripheral or host devices. Failure to do so may violate FCC and ICES rules.
FCC Radiation Exposure Statement
This equipment complies with FC C radiation exposure limits set forth for an uncontrolled environment.
The transmitters in this device must not be co-located or operated in conjunction
with any other antenna or transmitter.
To prevent radio interference to the licensed service, this device is intended to be
operated indoors and aw ay from windows to provide maximum shielding. Equipment (or
its transmit antenna) that is installed outdoors is subject to licensing.
Users are not authorized to modify this product. Any modications invalidate the warranty.
This equipment may not be modied, altered, or chan ged in any way without signed
written permission from Fujitsu. Unauthorized modication will void the equipment
authorization from the F CC and In dustry Canada and the warranty.
10 Fujitsu
Getting started
Getting started
Gettingstarted
Please observe the safety information in the "Important notes", Page 7 chapter.
Unpacking and checking the delivery
It is recommend ed not to throw away the original packaging material! It may be
required for reshipment at some later date.
PackagingContentsofd eliveryPackaging,
Unpack all the individual parts.
Check the contents of the package for any visible damage c aused during transport.
Check whether the delivery conforms to the details in the delivery note.
Should you discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Steps f or initial setup
Preparingfor rstuse, overviewPreparingforuse,
Only a few steps are necessary to put your new device into operation for the rst tim e:
Select a location for device and set up device
Connect external devices such as mouse, keyboard and monitor
Check the voltage at the mains outlet and connect the device to an electrical outlet
Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have received other external devices in addition to your own device (e.g.
a printer), do not connect these until after the initial installation. The following
sections describe how to connect these external devices.
Drives and boards
If you have received drives or boards with your device, please do not insta ll
them until after rst-time setup. H ow to install drives and boards is described
in the "
System expansions", Page 32 chapter.
Fujitsu 11
Getting started
Setting up the device
WorkstationErgonomicDevice
When installing your device, please read the recommendations and safety
notes in the "Safety/regulations" manual.
We recommend that you place your device on a surface which is not slippery. In
view of the man y different nishes and varnishes used on furniture, it is possible
that the rubber feet w ill mark the surface they stand on.
Depending on the location of your device, bothersome vibrations and no ises may
occur. To prevent this, a distance of at least 10 mm / 0.39 inch should be maintained
from other devices on casing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
A minimum distance of 200 mm / 7.87 inch from the device must
be observed for ventilation areas.
Do not stack several devices on top of each other.
Do not expose the device to extreme amb ient conditions (see "
Technical d ata", Page 53,
section "Ambient conditions"). Protect the device against du st, humidity and heat.
12 Fujitsu
Getting started
Operating position
You can use the device in a vert ical or horizontal operating position.
Vertical operating position
(optional)
Operation in the vertical operating position i s not allowed in Taiwan.
Proceed as follows to operate the device in the vertical operating position:
Verticaloperatingpo
sition
Operatingposition, v
ertical
Rubber/plasticfeetSideco ver
Disconnect the cables if required.
Pull off the foil from the rubber/plastic feet included in the pack of accessories.
Stick the rubber/plastic feet to the underside of the casing. In order to ensure a
that the unit is stable, the rubber/plastic feet should be located in app roximately
the positions shown in the illustration.
Place the device vertically on the rubber/plastic feet.
If necessary, reconnect any cables that were previously disconnected.
Fujitsu 13
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fujitsu ESPRIMO C710 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fujitsu ESPRIMO C710 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Fujitsu ESPRIMO C710

Fujitsu ESPRIMO C710 Gebruiksaanwijzing - Nederlands - 61 pagina's

Fujitsu ESPRIMO C710 Gebruiksaanwijzing - Deutsch - 61 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info