617528

Fujitsu B19-7 LED Handleiding

38
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
Display
Operating Manual
B19-7 LED
Congratulations on your pu
rchase of an innovative
product from Fujitsu.
Latest information about our products, tips, updates etc. can be found on
the Internet at: "
http://www.fujitsu.com/fts/"
You can find driver updates at: "http://support.ts.fujits u.com/download"
Should you have any technical questions, ple ase contact:
• our Hotline/Service Desk (see the Service Desk list or visit:
"
http://support.ts.fujitsu.com/co ntact/servicedesk")
• Your sales partner
• Your sales office
We hope you enjoy working with your new Fujitsu system!
Published by / Contact address in the EU
Fujitsu Te
chnology Solutions GmbH
Mies-van-der-Rohe-Straße 8
80807 Munich, Germany
"
http://
www.fujitsu.com/fts/"
Copyright
©Fujits
u Technology Solutions GmbH 2013. All rights reserved.
Publication Date
06/2013
Order No.: A26361-K1471-Z320-1-7619, edition 1
B19-7 LED
Operating M anual
Your LCD screen... 5
Important notes 7
Getting started 11
Operation 19
Notes on ergonomic colour adjustment 29
Troubleshooting 30
Explanatory information about
standard ISO 9241-307 32
Technical specification 33
Remarks
Notes on the product description mee t the design requirements of Fujitsu and are
provided for the purposes of comparison. The actual results may differ due to several
factors. Subject to technical changes without prior notification. Fujitsu accepts n o
responsibility for te chnical or editorial mistakes or omissions.
Trademarks
Fujitsu and the Fujitsu logo are registered trade marks of Fujitsu Limited or its
subsidiaries in the United S tates and other coun tries.
Microsoft and Windows are trademarks or registered trademarks of the Microsoft
Corporation in the United States and/or other countries.
VESA, DDC and DPMS are registered tradem arks of Video Electronics Standards Association.
All other trademarks specified here are the property of their respective owne rs.
Copyright
No part of this publication may be copied, reproduced or translated without
the prior written consent of Fujitsu.
No part of this publication may be saved or transmitted by any electronic means
without the written consent of Fujitsu.
Contents
Contents
YourLCD screen... ..................................................................... 5
Targetgroup ............................................................................ 5
Furtherinformation ...................................................................... 6
Notational conventions .................................................................. 6
Important notes ........................................................................ 7
Safetyinstructions ...................................................................... 7
Powercable ............................................................................ 8
Transporting the devic
e ..................................................................
8
Cleaning thedevice ..................................................................... 9
CEmarking ............................................................................ 9
Disposal and recyclin
g ..................................................................
10
Getting started ......................................................................... 11
Unpacking and checking the delivery . . ................................................... 11
Setting up thedevice .................................................................... 12
Setting up an ergonomic video workstation ............................................ 12
Mounting the monitor base . . . ....................................................... 14
Adjustingheight ..................................................................... 15
Adjustingthe inclination .............................................................. 15
Adjustingthe rotation ................................................................ 15
Adjustingportraitformat ............................................................. 16
Removing monitorbase .............................................................. 16
Connecting the device . .............................................................. 17
Connecting cables to the computer ................................................... 18
Operation .............................................................................. 19
Switching th
edevice onand off ..........................................................
19
Notes on powe
rmanagement ............................................................
20
Changing th
emonitorsettings ............................................................
21
Changing th
e monitor settings with the buttons of the control panel . .....................
22
Changing t
hemonitorsettings usingthe OSDmenu ....................................
24
Noteson ergonomiccolour adjustment ................................................ 29
Troubles
hooting .......................................................................
30
Explanatory informatio n abou t sta nd ard ISO 9241-307 . . . . . ............................. 32
Technic
al specification .................................................................
33
VESA-D
DC-compatible VGAinterface ....................................................
34
Preset
operating modes . . . . . . ...........................................................
34
Most f
requent operating modes .......................................................
34
SUB D p
ort .............................................................................
35
DVI-D
port ..............................................................................
36
Fujitsu 3
Contents
4 Fujitsu
Your LCD screen...
Your LCD screen...
has a whole range of useful features and functions, e.g.:
• TFT display (Thin Film Transistor; active ma trix)
• minimal space requirement
s thanks to slim casing
• LED background lighting
• optimum ergonomic chara
cteristics (totally distortion-free, excellent picture
definition and colour pu
rity right into the corners)
• landscape and po rtrait mode
• high degree of brightn
ess and good contrast
• high resolution (1280 x 1024)
• presentation of u p to
16.7 million colours (in conjunction with an appropriate display adapter)
• automatic scanning of horizontal frequen cies from 30 to 82 kHz and refresh rates
(vertical frequencies) from 56 to 76 Hz (absolutely flicker-free)
• digital screen con
troller with micropro cessor for storing 20 different display modes
• freely adjustable colour alignment for matching the screen colours to the
colours of various input and output devices
• convenient oper
ation v ia integrated OSD (On-Screen-display) menu
• VESA-DDC compatibility
• VESA-FPMPMI co
mpatibility (Flat Panel Monitor Physical Mounting Interface) –
Mounting devi
ce for swivel arm or a similar accessory
• Plug&Play capability
• ECO function
• Digital Video Input (DVI) with HDCP
• power manag
ement for reducing powe r consumption when the computer is not in use
• compliance with the recommendations according to TCO 6.0
• the monito
rfulfills all GS ("Geprüfte Sicherheit", Certified Security) requirements.
This operating manual contains important information you require to start up and run your LCD monitor.
A display adapter (screen controller) with VG A interface or a digital display adapter with
DVI interface is required to control the LCD monitor. The monitor processes the data
supplied to it by the display adapter. The display adapter or the associated driver software
is responsible for setting the modes (resolution and refresh rate).
When putting the monitor into o peration for the first time, the screen display should be
optimally adapted to the display adapter used and adjusted in acco rdance w ith y our
needs (see chapter "
Changing the monitor settings", Page 21).
Target group
You d
on’t need to be an "expert" to perform the operations described here.
Non
etheless, it is important to always observe the safety notes given in the operating
ins
tructions for the computer and in this manual.
In t
he event of any problems, please contact your sales office or our Service Desk.
Fujitsu 5
Your LCD screen...
Further information
Details of ho w you set t he resolution and ref resh rate are provided in the do cumentation
for your display adapter and the associated driver software.
For ergonomic reasons, a screen resolution of 1280 x 1024 pixels is recommended.
Because of the technology used (active matrix) an LCD monitor provides a totally
flicker-free picture even with a refresh rate of 60 Hz.
Notational conventions
Pay particular atten tion to text marked with this symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important information for the proper use of the device.
►
Indicates an activity that must be performed
Indicates a result
This font
Indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. you r password (Name123) or a command used to
start a program (start.exe)
This font
Indicates i nforma tion that is displayed on the screen by a program, e.g.:
Installation is complete.
This font
Indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This fon
t"
Indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web addre ss: For more
information, go to "
http://www.fujitsu.com/fts/ "
• Names of CDs, DVDs and titles or designations of other materials, e.g.:
"CD/DVD Drivers & Utilities" or "Safety" Manual
Key
Indicates a button on the monitor, e.g:
MENU
This
font
Indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
6 Fujitsu
Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information reg arding safety which it is essential to
take note of when working with your device.
Safety instructions
This device complies wit
h the relevant safety regulations for data processing equipment,
including electronic of
fice machines for use in an office e nvironment. If you have
any questions about whe
ther the device can be used in the intended environment,
please contact your sal
es office or our Service Desk.
• The display surface of
the device is sensitive to pressure and scratches. You should therefore
be careful with the dis
play surface in order to avoid lasting damage (scratches).
• If the device is brought into the installation site from a cold environment, condensation
can form . Before op erating the device, wait until it is absolutely dry and has reached
approximately the same temperature as the installation site.
• When installing an
d operating the device, please observe the notes on environmental
conditions in Chap
ter "
Technical specification", Page 33 as well as the instructions in
Chapter "
Setting
up an ergonomic video workstation", Page 12.
• To ensure sufficient ventilation, the air inlet and outlet openings of the device m u st be kept clear.
• The device autom
atically sets itself to the correct voltage within the rang e from 100 V to 240 V.
Make sure that t
he local mains voltage is neither higher nor lower than this range.
• Ensure that the power socket on the device and the mains outlet are freely accessible.
• The ON/OFF swi
tch does not disconnect the monitor from the mains voltage. To disconnect
fully from the
mains supply, disconnect the power plug from the s ocket.
• The device is equipped with a power cable that complies with safety standards.
• Use the suppl
ied power cable only.
• Lay the cab les in such a way that they do not create a hazard (danger of tripping)
and cannot be damaged. When connecting the device, observe the relevant
notes in chapter "
Connecting the device", Page 17.
• No data tra
nsfer c ables should b e connected or disconnected during a thunderstorm.
• Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get
inside the d evice (danger of electric shock, short circuit).
• The devic
e is not waterproof! Never immerse the device in water and protect
it from s
pray water (rain, sea water).
• In an emergency (e.g. damaged casing, operation controls or cables, penetration
of liquids or foreign matter), switch off the device, disconnect the power plug
and contact your sales outlet or our Service Desk.
• Repai
rs to the device m ust only be perfo rmed by qualified technicians. Unauthorised opening
and in
correct repair may greatly endanger the user (electric shock, fire risk).
• Only use the screen resolution settings and refresh rates specified in Chapter "
Technical
specification", Page 33. Otherwise you m ay damage the device. If you are in any
doubt, contact your sales outlet or our Service Desk.
•Usea
screen saver with moving images and activate the power management for
you
r monitor to prevent still images from "burning in".
• If you operate the device with the swivel arm or a similar accessory, it must not be turned by 180°.
Fujitsu 7
Important notes
• The device may only be operated in w ide format (0° landscape mode) and high format
(90° portrait mode). The buttons of the control panel are located at the bottom in
the middle of the monitor in wide format (0° landscape mode) and at the left-hand
side of the monitor in high format (90° portrait mode).
• Store this manual close to the device. If you pass the device on to third
parties, you should pass this manual on with it.
• We recommend that you place your device on a durable, non-slip surface. In view
of the many different finishes and varnishes used on furniture, it is possible that the
feet of the device may mark the surface they stand on.
• To ensure sufficient ventilation, the air supply and air outlet openings of
the monitor must never b e blocked.
• The device must be connected to protective earth.
• To prevent possible hearing damage, do not listen at high volume levels for long periods.
• Warning for excessive sound pressure from earphones and headphones:
Excessive sound pressure from earphones and headphones can cause hearing loss.
Adjustment of the equalizer to maximum increases the earphones and hea dphones
output voltage and therefore the sound pressure level.
Power cable
Use the supplied power cable only.
Use the following guidelines if it is necessary to replace the original cable set.
• The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirement s.
• The cable has to be HAR-certified or VDE-certified. The mark HAR or
VDE will appear on the outer sheath.
• For devices which are mounted on a desk or ta ble, type SVT or SJT cable sets may be
used. For devices which sit on the floor, only SJT type cable sets m ay be used.
• The cable set must be selected according to the rated current for your device.
• If necessary, replace the original power cable with a regular grounded 3-core mains lead.
Transporting the device
Device,Transpo rtationRetransportation
Transport all parts separately in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
8 Fujitsu
Important notes
Cleaning the device
Switch off the device and unplug the power plug.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Ensure that no liquid enters the device.
The display surface of th
e device is sensitive to pressure and scratches. Clean
it only using a soft, sli
ghtly moistened cloth.
The surface of the casin
g can be cleaned with a dry cloth. If particularly dirty, use a cloth that
has been moistened in m
ild domestic detergent and then carefully wrung out.
CE marking
The shipped version of this device complies with the requirements of EU directives 2 004/108/ EC
"Electromagnetic compatibility", 2006/95/EC "Low voltage directive", 2009/125/EC "Ecodesign
directive" and 2011/ 65/EC "RoHS directive".
Fujitsu 9
Important notes
Disposal and recycling
This device has been manufactured as far as possible from materials which can be recycled or
disposed of in such a way that the environment is not damaged. The device may be taken back after
use to be reused or recycled, provided that it is returned in a condition that befits its intended use.
Any components not reclaimed will be disposed of in an environmentally acceptable manner.
The device must be disposed of in accordance with the local regulations for disposal of special waste.
If you have any questions o n disposal, please contact your local sales office or our
Service Desk, or contact one of the following directly:
Germany
Belgium
Switzerland
Fujitsu Technology Solu
tions
GmbH
Remarketing and Recycl
ing
D-33106 Paderborn
Tel.: +49 5251 / 81 80 1
0
Fax: +49 5251 / 81 80 1
5
"
http://fujitsu.c
om/fts/remarketing"
RECUPEL
Boulevard Reyers, 80
B-1030 Brussels
Tel.: +32 2 / 706 86 16
Fax: +32 2 / 706 86 13
E-Mail: info@recup
el.be
"
http://www.recu
pel.be"
SWICO
Schweizerischer
Wirtschaftsverband
der Inform ation s-,
Kommunikations- und
Organisationstechn
ik
AlistoftheSWICOac
ceptance
locations can be fou
nd at:
"
http://www.swic
o.ch"
Asia
USA
Taiwan:
Environmental Protection
Administration
Executive Yuan R.O.C.
"
http://recycle.epa.gov.tw"
Fujitsu America, Inc.
1250E. Arques Avenue
Sunnyvale, CA 94085 U.S.A.
Phone No.: (408) 746-6000
You c an also find more information on this at
"
http://www.fujitsu.com/fts/about/fts/envi r onment-care/".
10 Fujitsu
Getting started
Getting started
Unpacking and checking the delivery
The display su rface of the device is sensitive to pressure and scratches.
Always hold the device by the casing!
The c omplete device package includes:
• one monitor
• one data cable (DVI)
• one data cable (VGA)
• one aud io cable
• one power cable
• one CD with software and documentat ion
• one Warranty Booklet
•aflyer "Qu ick Start Guide"
• one "Safety/Regulations" manual
► Unpack all the individual parts.
► Check the contents of the package for a ny visible damage caused during transport.
► Check whether the delivery conforms to the details in the delivery note.
► Should you discover t hat the delivery does not correspond to the delivery
note, n otify your local sales outlet immediately.
Do not discard the original packing m aterial of the devices. You may need the
packaging in the future if you n eed to transport your device.
Fujitsu 11
Getting started
Setting u p the device
To ensure sufficient ventilation, the air inlet and outlet openings of
the device must be kept clear.
Setting up a n ergonomic video workstation
1
► Do not position the video workstation
opposite a window (1).
1
► Position the monitor outside the reach
of a light source (1).
12 Fujitsu
Getting started
1
► Position the keyboard where it is
easiest to reach (1).
1
50 cm
► Position the monitor so that the eye distance
to the screen (1) is a round 50 cm.
► Position the monitor for optimum viewing
(1). The m onitor should und er no
circumstances fall outside the permissible
viewing space (2).
Depending on t he situation, it may be advisable to use a swivel arm or similar
accessory (VESA FPMPMI), which are available from specialist dealers. For
this purpose the monitor base must be removed b eforeh and as described
in Chapter "
Removing monitor base", Page 16.
Fujitsu 13
Getting started
Mounting the monitor base
Do not remove the retaining splint before you have secured the base plate on
the monitor and have brought it into o perating position.
2
1
3
► Insert the base plate on the foot (1).
► Guide the screw through the opening (2).
► Secure the base plate with the scr ew (3).
► Place the monitor in operating p osition.
14 Fujitsu
Getting started
Adjusting height
The height adjustment is fi xed in the transport position.
1
2
► To free the fixing, remove the locking
pinontheflange (1).
The height of the monitor can be adjusted
by approximately 130 mm.
► G rasp the monitor with both hands on
the right and left edge of the casing
and move it up or down (2).
Adjusting the i
nclination
The inclination of the monitor can be adjusted by -3° (forwards) and +35°
(backwards) from its vertical position.
► Hold the monitor with both hands on the left an d right sides of the casing
and move it to the desired angle.
Adjusting the rotation
► Grasp the monitor with both hands on the right and left edge of the casing
and turn it to the desired position.
Fujitsu 15
Getting started
Adjusting portrait format
The mo nitor can be rotated from h orizontal format (landscape mode) into
vertical format (portrait mode).
► G ra sp the monitor with both hands on the right and left edge of the casing, tilt the monitor
backwards, move it into th e highest position an d turn it clockwise until it is in the portrait position.
For you to be able to display the screen conten ts in portrait mode, your graphics card
will also need to support this function or you will need to use special software.
In the OSD menu you have the option of switching the OSD manually
from landscape mode to portrait mode (see "
Changing the monitor
settings using the OSD menu", Page 24).
To reset the monitor to landscape mode, the m onitor should be turned anti-clockwise.
The OSD display can be reset again in th e OS D menu.
Removing monitor base
Before you can use a swivel arm or a similar accessory, you must remove the monitor base.
The display surface is su sceptible to scratching!
1
2
► Switch off the monitor and pull the power
plug out of the po w er so cket.
► Lay the monito
r on its face on a soft surface.
► Disconnect all cables.
► Release the b
ase stand by moving the slider
in the direc t
ion of the arrow (1) and hold it
while liftin
g the complete base stand up (2).
Yo u can now mount a swivel arm or a
similar accessory in accordance with VESA
FPMPMI using a hole spacing of 100 mm.
For instructions on how to mount the swivel arm or a similar accessory, please
see the documentation for the swivel arm or similar accessory.
16 Fujitsu
Getting started
Connecting the device
Please observe the safety information in " Importa nt notes", P age 7.
CE conformance and optimum picture quality are guaranteed only if
you use the data cables supplied.
► Switch off the monitor and the computer.
► Disconnect the power plug
from the computer.
Connecting cables to the monitor
The data cables supplie
d have two 15-pin D-SUB connectors or two 24-pin D VI
connectors for connect
ion to the mon itor and to the computer.
Informationonthecom
puter connections and interfaces is contained in the
operating manual for
the computer.
2
5
64
3
1
1=Securi
ty slot for Security Lock
2 = Po wer connector
3=AUDIO
-OUT socket
4 = AUDIO-
IN socket
5 = DVI-D socket (DVI)
6=D-SUB
socket (VGA)
► Select the appropriate data cable for your computer.
Fujitsu 17
Getting started
► Connect one of the connectors of the data cable to the D-SUB or DVI-D connector on the
monitor and secure the plug-in connection by tightening the safety screws.
The monitor automatically detects the input when only one signal source is connected.
► In sert one plug of the audio line in the AUDIO IN socket on the monitor
and ma ke sure it is properly engaged.
► Plug the power cable supplied into the power connector of the monitor.
A lock (Security Lock) can be mounted in the security slot to protect the monitor
against theft. A Security Lock is not included with the monitor at delivery.
Connecting cables to the computer
Information on the computer connections and interfaces is contained in the
operating manual for your computer.
► C onnect the data cable to the (active) m onitor port on the computer and secure
the plug-in connection by tightening the safety screws.
► In sert the other plug of the audio cable in the audio output of the computer.
► Plug the power connector of the monitor into a properly groun ded mains outlet.
► Plug the power connector of the computer into a properly grounded mains outlet.
If your computer has two monitor ports ("onboard" screen controller and separate
graphics card), the monitor port for the separat e graphics card is active as standard.
18 Fujitsu
Operation
Operation
Switching the device on and off
1 2
12
1 = ON/ OFF switch 2 = Power supply indicator
The c
olour of the power indicator changes as follows:
Power indicator Status
blue
Monitor and computer are switched on (normal mode).
green
Mon
itor and computer are switched on (ECO mode).
orange
Mo
nitor is not receiving a video signal or is in power saving mode.
d
oes not light up
Monitor is switched off.
► Switch the device on again with the ON/OFF switch (1).
Fujitsu 19
Operation
Notes on power management
If your computer is equipped with power management (power-saving mode), the monitor can fully
support this function. Here the monitor does not distinguish between the individual energy-saving
modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of
immediately switching into the mode with the highest energy-saving effect.
Stage Operation
Power saving mod e
Normal
ECO
Power supply indicator Lights up blue Lit green illuminated orange
Display Max. brightness
typ. 175 cd/m
2
unlit
Typical power
consumption (without
USB and audio)
17 W 15 W 0.22 W
If the computer detects inactivity (n o input) it sends an approp riate signal to the monitor to r educe
the power consumption (power saving mode). The power indicator of the monitor changes
colour to show the change in status. ECO mode is the preset factory default.
Once an input is made at the computer the screen contents are restored.
For detailed information on how energy-saving mode operates, please refer to
the operating manual or technical manual of the computer.
20 Fujitsu
Operation
Changing the monitor settings
When putting the monitor into operation for the first time, the scree n d isplay should
be optimally adapted to the display adapter used.
The buttons of the control panel h ave two functions. When the OSD menu
(On-Screen Display) is active, the current meaning of the buttons is shown
directly over the buttons on the edge of the screen.
The display over the buttons varies depending on the sub-menu cho sen.
12
1 = Bu ttons of the control panel 2 = Current button function
Fujitsu 21
Operation
Changing the monitor settings with the buttons
of the control panel
With the OSD menu not activated, you can make the following settings directly.
Call up OSD menu
Activate/deactivate ECO operating m ode
Select input signal (digital/analog)
Adjust volume
Adjust brightness
Perform au to-adjustment of the monitor with analog input
ON/OFF switch with power indicator
Select OSD language
After the first switch on and after the mon itor has be en re set to the factory s ettings,
the selection screen for the language appears:
► Press the
ECO
/ button or the
INPUT
/ button to select the desired language.
► Press the
MENU
/ button to confirm or the
AUTO
/ button to cancel.
After selecting the O SD language for the first time, you can change
it at any time in the OSD.
Activate/deactivate ECO operating m ode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the
ECO
button to switch the ECO operating mod e on or off.
The mes
sage ECO Mode on or ECO Mode off is displayed.
If the ECO operating mode is activated, the following O SD settings are changed:
Colour
6,500 K
Brightness
reduced
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
22 Fujitsu
Operation
Select input signal (D-SUB/DVI-D)
► Press the
INPUT
button to call the Input select setup window.
► Press the
/ button or the / button to select the desired
monitor connection (VG A or DVI).
► Press the
MENU
/ buttontoconfirm or the
AUTO
/ button to cancel.
This setting window can also be called when the OSD menu is locked .
Performing auto-adjustment of the m onitor
This setting is only p
ossible with an analog VGA input.
► Press the
AUTO
button for about 1 second.
The Auto Processing message appears.
Picture quality and position are set to optimum values for your system.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised
changes to the monitor settings.
► Press the
ECO
button and the
INPUT
button at the same time and
keep them pres sed for a few seconds.
The message Power button loc ked / unlocked is displayed.
Proceed in the same way to release the locked ON/OFF switch again.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and ho ld the
MENU
button and the ON/OFF switch simultaneously for several seconds.
The m e ssage OSD locked and a progress bar appear.
► To activate the lock function, keep both buttons pressed until th e progress bar is f ully loaded.
The OSD menu is locked.
Please proceed in the same manner to release the locked OSD menu again.
Fujitsu 23
Operation
Changing the monitor settings using the OSD menu
With the buttons on the control panel, you can call up and use the integrated
OSD (On-Screen Display) menu.
The English menu names are used in the following description (default s etting).
Enable OSD menu
► Press the
MENU
button to activate the OSD menu.
The ma in menu appears with icons for the sub-me nus.
The first symbol, (Brightness/Contrast), is highlighted and the associated functions
are visible in the right-hand menu field.
► To exit the OSD menu, press the
AUTO
/ button.
Selecting sub-menus of the the OSD m enu
► Press the
ECO
/ button or the
INPUT
/ button to highlight another
sub-menu (e. g. Image adjust).
► Press the
MENU
/ button to select the h ighlighted sub-menu.
The adjustment window will be displayed (e.g. Image adjust ). Further settings can be made here.
► To return to the main menu, press the
AUTO
/ button.
24 Fujitsu
Operation
Changing settings
► Press the
ECO
/ button or the
INPUT
/ button to highlight a function.
► Press the
/ button or the / button to change the setting.
► Press the
MENU
/ bu
tton to save the change o r the
AUTO
/
button to qui
t the function without change.
If you want t
o change other settings, select the corresponding function from the O SD
main menu. A
ll possible adjustments of the main me nu are described in the following.
OSD menu functions
The OSD menu for analogue monitor operation is described below. During
digital operation some f unctions are not available, as they are not required
due to the digital transmission technology used.
Fujitsu 25
Operation
Adjusting the brightness and contrast
Call up the Brightness/Contrast setting window
Brightness
Set the brightness of the display
With this function you chang e th e b rightness of the background lighting.
Contrast
Set the contrast of the display
With this function you mod ify the contrast of bright colour tones.
Black level
Set the brightness of the display
With this function you modify the contrast of dark colour tones.
Auto level
Adjust the signal level
With this function you can automatically set the contrast.
Thefunctionisexecutedwiththe
button.
If the con trast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximu m brightness will not be achieved.
Adjusting the picture size and position
These settings are only possible if the PC is connected analog via VG A.
Call the Image
adjust setting window
Phase
Eliminate picture disturbance
With this function you fine-tune your monitor to eliminate picture disturbance.
Clock
Set synchro
nisation
With this f
unction you adjust the picture w idth to eliminate vertical picture
disturban
ces.
H-Positi
on
Adjust th
e horizontal position
With this
function you m ove the picture to the left or to the right.
V-Posit
ion
Adjust t
he vertical position
With th
is funct ion you move the picture up or down.
Expans
ion
Adjus
t the picture size
Full s
creen = selection o f full screen mode
Keep
aspect = maximum picture size without distortion
26 Fujitsu
Operation
Adjust ing t he volume
Call the Audio setting window
Vol u m e
Set the volume for playback with the integrated loudspeakers
Mute
Switch the loudspeakers off or o n
Setting colour temperature and colours
Call the Colour setting window
Select the colour temperature
The "warmth" of the screen colours is set using the colour temperature. The
colour temperature is measured in Kelvin (K). You can choose between
sRGB, 6500 K, 7500 K, 9300 K, Native and Custom Colour (user-defined setting).
In the user-de fined setting you can ch ange the colour ratios of the basic
colours (red, green, blue) as required.
Adjust ing the displ
ay of the OSD menu
Calling the OSD Setup adjustment window
Language
Selecting the language for the OSD menu
With this function you select the language for the OSD menu.
The default setting is English.
OSD Timeout
Setting the display duration of the OSD menu
With this function you can select a v alue from 10 t o 120 seconds.
If the set time expires without a setting being made, the OSD menu is
automatically hidden.
OSD Rotation
With this function you switch the OSD menu from portrait mode to landscape
mode and vice versa.
On = The OSD menu is displayed in portrait m ode.
Off = T he OSD menu is displayed in landscape mode.
Fujitsu 27
Operation
Setting functions in the Advanced menu
Call up the Advanced setting window
Input select
Selecting the input signal
This function allows you to switch the monitor from analogue to digital mode
and vice versa, w hen several signal sources are connected.
This requires t hat the graphic card used supports this function.
DDC-CI
Activation/deactivation of the DDC-CI
On = The DDC-CI function is enabled (standard setting)
Off = The DDC-CI function is disabled
ACR
Enable/disable ACR function
On = The ACR function is enabled
Off = The AC R function is disabled (default s etting)
Factory Recall
Activating the factory settings
With this function all s ettings a re reset to the factory settings without
prompting for confirmation.
Press the
button to activate the function. The m essa ge Auto
Processing is displayed.
Displaying in
formation
Call the Information setting w indow
This function displays the model designation, serial nu mber, resolution, H/V
frequency and ECO mode.
28 Fujitsu
Notes on ergonomic colour adjustmen
t
Notes on ergonomic colour adju
stment
If you select colours for the monitor in your application programmes,
take note of the information below.
The primary colours blue and red on a dark background do not produce the minimum
required contrast of 3:1 and are therefore not suitable for continuous t ext and data entry.
When using several colours for characters and background and giving the primary colours full
modulation, you can obtain very suitable colour combinations (see the following table):
Characters
Background
black white purple blue
cyan green
yellow red
black
++
-
+++
-
white
+++
---
+
purple
++
-----
blue
-
+
-
+
-
+
-
cyan
+
--
+
---
green
+
--
+
---
yellow
+
-
++
--
+
red
-
+
----
+
+ Colour combination v ery suitable
- Colour combination not suitable because colour hues are too close together, thin characters
are n ot identifiable or rigorous focusing is demanded of the human eye.
Fujitsu 29
Troubleshooting
Troubleshooting
Should an error occur, first check the following points. If the distortion is s till not eliminated,
the monitor should, if possible, be checked on another computer.
If you cannot solve the problem, please contact our Service Desk.
Having this problem? Check the follo wing points:
No screen display
Power indicator does not light up
► Ch eck whether the power cable on the
monitor is connected correctly.
► Ch eck wheth er the comput
er is switched on.
No screen display
Power indicator is lit
► Ch eck wheth er the computer is switched on.
► Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
► Press any key on the computer keyboard.
The compute r may be in p ower saving
mode.
► Alter the brightness and/or contrast until you
get a picture.
Message: No Signal
► Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
► Ch eck wheth er the computer is switched on.
Message:
Frequency out of range:
##kHz/##Hz
Please change the display mode
to 1280 x 1024 with 60 Hz
The input sign
al (horizontal frequency and
refresh rate
) at the displayed input does not
correspond t
o the technical data f or the monitor.
► Adjust the v
ideo frequency range using the
computer so
ftware (see documentation for
the compu te
r or display a dapter).
► Set a different screen resolution using the
computer software (see documentation for
the computer or display a dapter).
Picture position not correct
The monitor recognises an undefined mode (see
chapter "
Technical specification", Page 33).
► Press the
AUTO
button to conduct the
auto-adjustment of the screen.
Picture is shaking
► Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
► Press the
AUTO
button to conduct the
auto-adjustment of the screen.
Picture is wro ngly adjusted
► Ru n
the Factory Recall function in the OSD
men
u.
The Auto Processing message appears.
30 Fujitsu
Troubleshooting
Having this problem? Check the follow ing points:
Picture disturbances (vertica
l lines)
► Press the
AUTO
button to conduct the
auto-adjustment of the s creen.
Picture disturbances (horizo
ntal lines, picture
noise)
► Press the
AUTO
button to conduct the
auto-adjustment of the s creen.
The screen becomes darker
The background lighting has a limited lifetime.
If your monitor display should be come too dark,
the background lighting will have to be replaced.
► C ontact our Service Desk.
Fujitsu 31
Explanatory information abo ut stan
dard ISO 9241-307
Explanatory information abou
t
standard ISO 9241-307
Permanently unlit or lit p ixels
Today’s production techniques cann ot guarantee an absolutely fault-free screen display. Dep ending
on the total number of pixels (resolution), there may be a few constantly lit or unlit pixels or subpixels.
Pixel
A pixel consists of 3 su bpixels, normally red, green and blue. A pixel is
the smallest element that can be generated by complete functionality of
the display.
Subpixel
A subpixel is a separately addressable internal structure within a pixel that
enhances the pixel function.
The maximum permitted number of f aulty pixels is stipulated in the international stan dard
ISO 9241-307. In accordance with standard ISO 9241-3, LCD monitors by Fujitsu comply with C lass
II for low resolutions and Class I for resolutions of 1680 x 1050 ( 1764000 pixel) and higher.
Examples:
A flat-screen monitor with a resolution of 1280 x 1024 ha s 1280 x 1024 = 1310720 pixels. Each pixel
consists of three subpixels (red, green and blue), so t here are a lmost 3.9 million subpixels in total.
According to ISO 9241-3 (Class II), a maximum of 3 lit and 3 unlit pixels plus 7 lit or 13 unlit subpixels,
or a corresponding combination, may be faulty (1 lit subpixel counts as two unlit subpixels).
32 Fujitsu
Technical specification
Technical specification
Condensation is not permitted, neither in the rated range of operation
nor in the limit range of operation.
Product name B19-7 LED
Model name DY19-7
Dimensions and weight
Visible diagonals 48 cm
Dot pitch 0.098 mm
Width 378.8 mmImage size
Height 303.0 mm
Maximum resolution 1280 x 1024
Width 414 mm
Height 370 mm
Dimensions incl. monitor base
Depth 209 mm
Weight (without packaging)
approx. 5.2 kg
Storable d
isplay modes
20
Pixel err
or classes acco rdi ng
to ISO 924
1-307
Class
II
Electri
cal data
Analog
Positive, 0.7 V
pp
,75Ω
Video
Digital
DVI-D with HDCP
Synch
ronisation
Separ
ate Sync. TTL,
posi
tive or negative
Horizontal frequency
30 k
Hz .... 82 k H z
(mu
lti-scanning)
Refresh rate
56
Hz .... 76 Hz
Maximum pixel rate 165 MHz
Power supply
Switches automatically
100 V – 240 V, 50/60 Hz
Normal operation 17 W
ECO operating mode
15 W
Typical power consumption
(without audio)
Power saving mode 0.22 W
Sound output 1.5 W left; 1.5 W right
Fujitsu 33
Technical specification
Environmental con dit ion s
Environment class 3K2, DIN IEC 721
Rated range of operation
Humidity
15 °C .... 35 °C
20 % .... 85 %
Limit range of operation
Humidity
5 °C .... 35 ° C
15 % .... 85 %
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics St andard Association, Display Data Channel) is used as the communications
interface between the monitor and the computer. If the computer is equipped with a
VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring
optimum operation from the monitor and select the appropriate settings.
Preset operating modes
The picture posit
ion and size have been set to optimum values at the factory for the
operating modes l
isted above. Depending on the display adapter use d, it may be
necessary to adj
ust the display position or s ize. In this case, you ca n change and
save the settin
gs (see chapter "
Changing the monitor settings", Page 21).
For ergonomic r
easons, a screen resolution of 1280 x 1024 pixels is recommended.
Duetothetech
nology used (active m atrix) an LCD monitor provides a totally
flicker-free p
icture even with a refresh rate of 60 H z.
Most frequent operating modes
Horizontal frequency Refresh rate Screen resolution
31.5 kHz 70 Hz 720 x 400
31.5 kHz 60 Hz 640 x 480
37.5 kHz 75 Hz 640 x 480
37.9 kHz 60 Hz 800 x 600
46.9 kHz 75 Hz 800 x 600
48.4 kHz 60 Hz 1280 x 1024
60.0 kHz 75 Hz 1280 x 1024
64.0 kHz 60 Hz 1280 x 1024
80.0 kHz 75 Hz 1280 x 1024
34 Fujitsu
Technical specification
SUB D port
610
1115
51
Pin Meaning
1 Video input red
2 Video input green
3 Video input blue
4
Ground
5
Ground
6 Video ground red
7
Video ground green
8 Video gro und blue
9
+5 V (DDC)
10
Sync. ground
11
Ground
12
DDC Data
13 H. sync
14 V. sync
15
DDC Clock
Fujitsu 35
Technical specification
DVI-D port
9
1
17
Pin Meaning
1
TMDS Data2–
2
TMDS Data2+
3
TMDS Data 2/4 Shield
4 not connected
5
not connected
6
DDC Clock
7
DDC Data
8
Analog Vertica
lSync
9
TMDS Data1–
10
TMDS Data1+
11
TMDS Data 1/
3 Shield
12 not connec
ted
13 not connec
ted
14 +5V Power
15 Earth
16 Hot Plu
g Detect
17
TMDS Data0–
18
TMDS Data0+
19
TMDS
Data 0/5 Shield
20 not
connected
21 no
t connected
2
2
TMDS Clock Shield
23
TMDS Clock+
24
TMDS Clock–
36 Fujitsu
… 38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fujitsu B19-7 LED bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fujitsu B19-7 LED in de taal/talen: Engels als bijlage per email.

De handleiding is 0,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Fujitsu B19-7 LED

Fujitsu B19-7 LED Gebruiksaanwijzing - Nederlands - 41 pagina's

Fujitsu B19-7 LED Gebruiksaanwijzing - Deutsch - 40 pagina's

Fujitsu B19-7 LED Gebruiksaanwijzing - English - 41 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info