Handleiding Fujifilm finepix j25 (pagina 1 van 104) (Engels)

289591

Verklein

Vergroot

Pagina terug

1/104

Pagina verder

Before You Begin

First Steps

Basic Photography and Playback

More on Photography

More on Playback

Movies

Connections

Menus

Technical Notes

Troubleshooting

Appendix

Owner’s Manual

Thank you for your purchase of this

product. This manual describes

how to use your FUJIFILM FinePix

J20 or J25 digital camera and the

supplied software. Be sure that

you have read and understood its

contents before using the camera.

For information on related products, visit our website at

http://www.fujifilm.com/products/index.html

BL00835 -200

Camera Q & A

Find items by task.

Camera Setup

Question

Key phrase

See page

How do I set the camera clock? Date and time 12

Can I set the clock to local time when I travel? Time di erence 77

How do I keep the monitor from turning o automatically? Auto power o 76

How do I stop the camera beeping and clicking?

Silent mode 25

Operation and shutter volume 72

What are the parts of the camera called? Parts of the camera 2

What do the icons in the monitor mean? Monitor 3

How do I use the menus? Menus 55

What’s behind that  ashing icon or error message in the monitor? Messages and displays 86

How much charge is left in the battery? Battery level 13

Taking Pictures

Question

Key phrase

See page

How many pictures can I take? Memory capacity 91

Is there a quick and easy way to take snapshots?

k mode

How can I make good portraits? Intelligent Face Detection 18

Can the camera automatically select the most suitable mode?

G mode

Is there a simple way to adjust settings for di erent scenes? Shooting mode 28

How do I shoot close-ups? Macro mode (Close-ups) 23

How do I keep the  ash from  ring?

Flash mode 24How do I stop my subjects’ eyes glowing red when I use the  ash?

How do I “ ll-in” shadows on back-lit subjects?

How do I take a group portrait that includes the photographer? Self-timer mode 26

iii

Camera Q & A

Question

Key phrase

See page

How do I frame pictures with the subject o to one side? Focus lock 21

How do I shoot movies? Recording movies 38

Viewing Pictures

Question

Key phrase

See page

How do I view my pictures? Single-frame playback 32

Is there a simple way to delete one image? Deleting pictures 17

How do I delete one or all images at once? Erase 36

Can I zoom in on pictures during playback? Playback zoom 33

How do I view a lot of pictures at once? Multi-frame playback 34

How do I view all pictures taken on the same day? Sort by date 35

Can I protect my pictures from accidental deletion? Protect 66

Can I hide the icons in the monitor when viewing my pictures? Choosing a display format 32

How do I view my pictures on TV? Viewing pictures on TV 41

Sharing Pictures

Question

Key phrase

See page

Can I print pictures on my home printer? Printing pictures 42

Can I copy my pictures to my computer? Viewing pictures on a computer 48

Camera Q & A ..................................................................................... ii

Camera Setup ............................................................................... ii

Taking Pictures ............................................................................. ii

Viewing Pictures .........................................................................iii

Sharing Pictures .......................................................................... iii

About This Manual ......................................................................... vi

Before You Begin

Introduction .......................................................................................1

Symbols and Conventions .......................................................... 1

Supplied Accessories ....................................................................1

Parts of the Camera ....................................................................... 2

The Monitor ................................................................................... 3

First Steps

Charging the Battery ..................................................................... 4

Inserting the Battery...................................................................... 6

Inserting a Memory Card ............................................................. 8

Turning the Camera on and O ............................................... 11

Shooting Mode ............................................................................. 11

Playback Mode ..............................................................................11

Basic Setup .......................................................................................12

Basic Photography and Playback

Taking Pictures in k (Auto) Mode ........................................ 13

Viewing Pictures ............................................................................ 17

More on Photography

Intelligent Face Detection and Red-Eye Removal .......... 18

Focus Lock ........................................................................................21

L Macro mode (Close-ups) ......................................................23

K Using the Flash ........................................................................... 24

J Using the Self-Timer ...............................................................26

a Shooting Mode .........................................................................28

Selecting a Shooting Mode......................................................28

Shooting Modes ...........................................................................29

G SCENE RECOGNITION ........................................................29

More on Playback

Single-Frame Playback ...............................................................32

Playback Zoom ..............................................................................33

Multi-Frame Playback .................................................................34

Sort by Date .....................................................................................35

A Deleting Pictures .....................................................................36

Movies

A Recording Movies ...................................................................38

D Viewing Movies .......................................................................40

Connections

Viewing Pictures on TV ............................................................... 41

Printing Pictures via USB ...........................................................42

Connecting the Camera ............................................................42

Printing Selected Pictures ........................................................42

Printing the DPOF Print Order ................................................43

Creating a DPOF Print Order ....................................................45

Viewing Pictures on a Computer ............................................48

Installing FinePixViewer ............................................................48

Installing FinePixViewer S: Windows .................................48

Installing FinePixViewer: Macintosh ..................................51

Connecting the Camera ............................................................53

Table of Contents

Menus

The Shooting Menu ...................................................................... 55

Using the Shooting Menu .........................................................55

Shooting Menu Options ............................................................56

g ISO .............................................................................................57

k QUALITY ..................................................................................58

d EXP. COMPENSATION .........................................................59

e WHITE BALANCE ..................................................................60

c CONTINUOUS (Continuous shooting) .........................61

The Playback Menu.......................................................................62

Using the Playback Menu .........................................................62

Playback Menu Options .............................................................63

b RED EYE REMOVAL ..............................................................64

B SLIDE SHOW ..........................................................................65

E PROTECT .................................................................................66

F COPY.........................................................................................67

D IMAGE ROTATE ......................................................................69

H TRIMMING ..............................................................................70

The Setup Menu .............................................................................71

Using the Setup Menu ...............................................................71

Setup Menu Options ...................................................................72

a IMAGE DISP. ..........................................................................73

b FRAME NO. ............................................................................74

c DIGITAL ZOOM ....................................................................75

a LCD POWER SAVE ...............................................................75

f PLAYBACK VOLUME ...........................................................75

g LCD BRIGHTNESS................................................................75

m FORMAT .................................................................................76

o AUTO POWER OFF ..............................................................76

p TIME DIFFERENCE ...............................................................77

Technical Notes

Optional Accessories ...................................................................78

Accessories from Fuji lm ..........................................................79

Troubleshooting

Troubleshooting ............................................................................80

Warning Messages and Displays ............................................8 6

Appendix

Glossary .............................................................................................90

Internal Memory/Memory Card Capacity .......................... 91

Speci cations ..................................................................................92

Caring for the Camera .................................................................97

About This Manual

This manual is for use with the following FinePix cameras: the J20 and J25. The J20 has a 2.7-inch

monitor; the J25 has a 3.0-inch monitor. All operations are identical; save where otherwise noted, the

illustrations in this manual show the J25. Before using the camera, read this Owner’s Manual and the

other supplied documents. For information on speci c topics, consult the sources below.

Memory Cards

Pictures can be stored in the camera’s internal memory or on optional SD and SDHC memory cards. In this

manual, SD memory cards are referred to as “memory cards.” For more information, see page 8.

✔

Troubleshooting

..............................................

pg. 80

Having a speci c problem with the camera?

Find the answer here.

✔

Glossary

..........................................................

pg. 90

The meanings of some technical terms may be

found here.

✔

Table of Contents

..............................................

pg. iv

The “Table of Contents” gives an overview of the

entire manual. The principal camera operations

are listed here.

✔

Warning Messages and Displays

.......................

pg. 86

Find out what’s behind that  ashing icon or

error message in the monitor.

✔

Camera Q & A

....................................................

pg. ii

Know what you want to do but don’t know the

name for it? Find the answer in “Camera Q & A.”

✔

Restrictions on Camera Settings

See another supplied document for restrictions

on the options available in each shooting mode.

Before You Begin

Introduction

Symbols and Conventions

The following symbols are used in this manual:

C Caution: This information should be read before use to ensure correct operation.

A Note: Points to note when using the camera.

B Tip: Additional information that may be helpful when using the camera.

Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the

monitor display may be simpli ed for explanatory purposes.

Supplied Accessories

The following items are included with the camera:

FinePix software CD

(IMPORTANT: read

the End User License

Agreement before

opening.)

NP-45 rechargeable

battery

BC-45A battery charger (with

power cable or built-in plug)

USB cable

Attaching the Strap Owner’s Manual

(may be distributed

on CD in some

countries or regions)

Attach the strap as shown.

Strap

Introduction

Parts of the Camera

For more information, refer to the page listed to the right of each item.

16 Connector for USB cable .............42, 53

Connector for A/V cable .....................41

17 Tripod mount

18 Battery chamber ......................................... 6

19 Battery latch ..................................................6

20 Memory card slot ....................................... 8

9 DISP (display)/BACK button ..........15, 32

( (silent mode) button ....................25

10 Indicator lamp ............................................16

11 W (zoom out) button .....................14, 34

12 T (zoom in) button ...........................14, 33

13 D (playback) button ............................32

14 Strap eyelet .................................................... 1

15 Battery-chamber cover .......................... 6

1 Shutter button ...................................15–16

2 ON/OFF button .............................................11

3 Flash ..................................................................24

4 Microphone .................................................38

5 Speaker ...........................................................40

6 Lens and lens cover

7 Self-timer lamp ..........................................26

8 Monitor ............................................................. 3

Selector button

MENU/OK button

(pg. 12)

Move cursor left

L (macro)

button (pg. 23)

Move cursor right

K ( ash) button

(pg. 24)

Move cursor up

o (monitor brightness)

button (see below)

I (delete) button (pg. 17)

Move cursor down

J (self-timer) button (pg. 26)

B Tip: Monitor Brightness

Pressing the o button brie y increases monitor brightness, making the display easier to see in bright light.

Normal brightness is restored when a photograph is taken.

Before You Begin

Introduction

The Monitor

The following indicators may appear in the monitor during shooting and playback:

■

Shooting

11 Date and time...................................12

12 Quality ...........................................38, 58

13 Number of available frames ....91

14 Sensitivity ............................................57

15 Focus warning .................................15

16 Blur warning ......................................24

17 Bright monitor indicator ..............2

18 Internal memory indicator

....... 8

19 Exposure compensation ...........59

10 :00

10 : 00

ISO

100

ISO

100

12/ 31 /2050

1234

1 Macro (close-up) mode............. 23

2 Flash mode.........................................24

3 Silent mode ...................................... 25

4 Intelligent Face Detection

indicator ............................................... 18

5 Shooting mode ...............................28

6 Battery level .......................................13

7 Self timer indicator ........................26

8 White balance ................................. 60

9 Continuous mode .........................61

10 Focus frame .......................................15

* Indicates that no memory card is inserted and that pictures will be

stored in the camera’s internal memory (pg. 8).

■

Playback

ISO

100

ISO

100

100-0001

12/ 31 /2050

12/ 31 /205012/ 31 /2050

10 :00

10 : 00

250

3.3

21345

1 Protected image ............................ 66

2 DPOF print indicator ....................45

3 Red-eye removal indicator .....64

4 Intelligent Face Detection

indicator ....................................... 18, 6 4

5 Silent mode indicator ................. 25

6 Playback mode indicator ..........32

7 Gift image ...........................................32

8 Frame number .................................74

First Steps

Charging the Battery

The battery is not charged at shipment. Charge the battery before use.

Place the battery in the charger.

Insert the battery into the supplied battery

charger as shown, making sure that the

battery is in the correct orientation. The

battery charger comes in one of two types,

depending on the country or region of sale:

one with a built-in plug that plugs directly

into the power outlet (A), and another that

connects to the power outlet via a power

cable (B).

Rechargeable battery

Terminals

Arrow

Battery charger

(type B)

Battery charger

(type A)

Plug the charger in.

Plug the charger into a power outlet. The

charging indicator will light.

Type A Type B

The Charging Indicator

The charging indicator shows battery charge

status as follows:

Charging indicator

Battery status

Action

O

Battery not

inserted.

Insert the

battery.

Battery fully

charged.

Remove the

battery.

Glows

Battery

charging.

—

Blinks Battery fault.

Unplug the

charger and

remove the

battery.

First Steps

Charging the Battery

Charge the battery.

C Cautions: Caring for the Battery

• Do not a x stickers or other objects to the battery.

Failure to observe this precaution could make it

impossible to remove the battery from the camera.

• Do not short the battery terminals. The battery

could overheat.

• Use only NP-45 batteries. Failure to observe this

precaution could result in product malfunction.

• Do not remove the labels from the battery or

attempt to split or peel the outer casing.

• The battery gradually loses its charge when not in

use. Charge the battery one or two days before use.

• Read the supplied documentation for additional

cautions concerning battery use.

C Caution: Battery Life

A noticeable decrease in the length of time the

battery will hold a charge indicates that it has reached

the end of its service life and should be replaced.

C Cautions: Using the Battery Charger

• Unplug the charger when it is not in use.

• Remove dirt from the battery terminals with a clean,

dry cloth. Failure to observe this precaution could

prevent the battery from charging.

• Charging times increase at low temperatures.

Inserting the Battery

After charging the battery, insert it in the camera as described below.

Open the battery-chamber cover.

A Note

Be sure the camera is o before opening the

battery-chamber cover.

C Cautions

• Do not open the battery-chamber cover

when the camera is on. Failure to observe this

precaution could result in damage to image

 les or memory cards.

• Do not use excessive force when handling the

battery-chamber cover.

Insert the battery.

Check the label in the battery-chamber.

Face the gold contacts downward and

insert the battery into the battery-chamber,

pressing the battery latch with the battery

in the direction shown below. Con rm that

the battery is securely latched.

Label

Battery latch

C Caution

Insert the battery in the correct orientation. Do

NOT use force or attempt to insert the battery

upside down or backwards. The camera will not

function if the battery is inserted backwards or

upside down.

First Steps

Inserting the Battery

Close the battery-chamber cover.

Removing the Battery

After turning the camera o , open the battery-

chamber cover, press the battery latch to the top,

and slide the battery out of the camera as shown.

Battery latch

C Caution

Turn the camera o before removing the battery.

Inserting a Memory Card

Although the camera can store pictures in internal memory, SD memory cards (sold separately) can

be used to store additional pictures.

When no memory card is inserted, d appears in the monitor and internal memory is used for recording

and playback. Note that because camera malfunction could cause internal memory to become

corrupted, the pictures in internal memory should periodically be transferred to a computer and

saved on the computer hard disk or on removable media such as CDs or DVDs. The pictures in

internal memory can also be copied to a memory card (see page 67). To prevent internal memory

from becoming full, be sure to delete pictures when they are no longer needed.

When a memory card is inserted as described below, the card will be used for recording and playback.

■

Compatible Memory Cards

SanDisk SD and SDHC memory cards have been tested and approved for use in the camera. A

complete list of approved memory cards is available at http://www.fujifilm.com/products/digital_

cameras/index.html. Operation is not guaranteed with other cards. The camera can not be used with

MultiMediaCard (MMC) or xD-Picture cards.

C Caution

Memory cards can be locked, making it impossible to format the card or to record

or delete images. Before inserting a memory card, slide the write-protect switch to

the unlocked position.

Write-protect switch

First Steps

Inserting a Memory Card

■

Inserting a Memory Card

Open the battery-chamber cover.

Insert the memory card.

Holding the memory card in the orientation

shown below, slide it all the way in.

Battery

Gold contacts

Be sure card is in correct

orientation; do not insert

at an angle or use force.

Close the battery-chamber cover.

Removing Memory Cards

Be sure the camera is o before opening the battery-

chamber cover. Press the card in and then release it

slowly. The card can now be removed by hand.

C Cautions

• The memory card may spring out if you remove

your  nger immediately after pushing the card in.

• Memory cards may be warm to the touch after

being removed from the camera. This is normal

and does not indicate a malfunction.

Inserting a Memory Card

C Cautions

• Format memory cards before  rst use, and be sure to reformat all memory cards after using them in a

computer or other device. For more information on formatting memory cards, see page 76.

• Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory

card, seek medical assistance immediately.

• Do not use miniSD or microSD adapters that expose the back of the card. Failure to observe

this precaution may cause damage or malfunction. Adapters that are larger or smaller than

the standard dimensions of an SD card may not eject normally; if the card does not eject,

take the camera to an authorized service representative. Do not forcibly remove the card.

• Do not turn the camera o or remove the memory card while the memory card is being formatted or data are

being recorded to or deleted from the card. Failure to observe this precaution could damage the card.

• Do not a x labels to memory cards. Peeling labels can cause camera malfunction.

• Movie recording may be interrupted with some types of memory card.

• The data in internal memory may be erased or corrupted when the camera is repaired. Please note that the

repairer will be able to view pictures in internal memory.

• Formatting a memory card or internal memory in the camera creates a folder in which pictures are stored.

Do not rename or delete this folder or use a computer or other device to edit, delete, or rename image

 les. Always use the camera to delete pictures from memory cards and internal memory; before editing or

renaming  les, copy them to a computer and edit or rename the copies, not the originals.

First Steps

Turning the Camera on and O

Shooting Mode

Press the n button to turn the camera on.

The lens will extend and the lens cover will open.

Press n again to turn the camera o .

B Tip: Switching to Playback Mode

Press the D button to start playback. Press the

shutter button halfway to return to shooting mode.

C Cautions

• Pictures can be a ected by  ngerprints and other

marks on the lens. Keep the lens clean.

• The n button does not completely disconnect

the camera from its power supply.

Playback Mode

To turn the camera on and begin playback, press

the D button for about a second.

Press the D button again to turn the camera o .

B Tip: Switching to Shooting Mode

To exit to shooting mode, press the shutter button

halfway. Press the D button to return to playback.

Tip: Auto Power O

The camera will turn o automatically if no operations are performed for the length of time selected in the

AUTO POWER OFF menu (see page 76).

Basic Setup

A language-selection dialog is displayed the  rst time the camera is turned on. Set up the camera as

described below (for information on resetting the clock or changing languages, see page 71).

Choose a language.

SET

STA

/ LANG.

1.1 Press the selector up, down,

left, or right to highlight a

language.

1.2 Press MENU/OK.

Set the date and time.

2011

2010

2008

2007

YY.MM.DD 1. 1 12

DATE / TIME NOT SET

2009

SET NO

2.1 Press the selector left or right

to highlight the year, month,

day, hour, or minute and press

up or down to change. To change the

order in which the year, month, and day

are displayed, highlight the date format

and press the selector up or down.

2.2 Press MENU/OK.

Tip: The Camera Clock

If the battery is removed for an extended period, the camera clock will be reset and the language-selection

dialog will be displayed when the camera is turned on. If the battery is left in the camera for about 30 minutes,

the battery can be removed for about 24 hours without resetting the clock or language selection.

Basic Photography and Playback

Taking Pictures in k (Auto) Mode

This section describes how to take pictures in k mode.

Turn the camera on.

Press the n button to turn the

camera on.

B Tip: Intelligent Face Detection

The  rst time the camera is turned on, Intelligent Face

Detection is automatically activated and the camera is

optimized for taking portrait photographs. For more

information on using Intelligent Face Detection, see

page 18.

Check the battery level.

Check the battery level in the monitor.

qw e

Indicator

Description

(white)

Battery partially discharged.

(white)

Battery more than half discharged.

(red) Low battery. Charge as soon as

possible.

(blinks red) Battery exhausted. Turn camera o

and charge battery.

Taking Pictures in k (Auto) Mode

Frame the picture.

Position the main subject in the focus area

and use the zoom buttons to frame the

picture in the monitor.

Zoom in using optical

zoom, or use digital zoom

(pg. 75) to zoom in closer.

Press W to zoom out Press T to zoom in

Zoom indicator

Holding the Camera

Hold the camera steady

with both hands and brace

your elbows against your

sides. Shaking or unsteady

hands can blur your shots.

To prevent pictures that

are out of focus or too dark

(underexposed), keep your

 ngers and other objects

away from the lens and

 a s h .

B Tip: Focus Lock

Use focus lock (pg. 21) to focus on subjects that are not in the focus frame.

Basic Photography and Playback

Taking Pictures in k (Auto) Mode

Framing Guideline

The images change as shown below if you press the

DISP/BACK button.

Indicators

displayed

Indicators

hidden

Best framing

To use the best framing, position the main subject

at the intersection of two lines or align one of the

horizontal lines with the horizon. Use focus lock (pg.

21) to focus on subjects that will not be in the center

of the frame in the  nal photograph.

Focus.

Press the shutter button halfway to focus on

the main subject in the focus frame.

1/250

3.3

Focus frame

Press

halfway

Camera selects small

focus frame and

focuses on subject

If the camera is able to focus, it will beep twice

and the indicator lamp will glow green.

If the camera is unable to focus, the focus frame

will turn red, a R indicator will appear

in the monitor, and the indicator lamp will

blink green. Change the composition or

use focus lock (pg. 21).

A Note

The lens may make a noise when the camera focuses.

This is normal.

Taking Pictures in k (Auto) Mode

Shoot.

Smoothly press the shutter

button the rest of the way down

to take the picture.

B Tip: The Shutter Button

The shutter button has

two positions. Pressing the

shutter button halfway (q)

sets focus and exposure;

to shoot, press the shutter

button the rest of the way

down (w).

A Note

If the subject is poorly lit, the  ash may  re when the

picture is taken. To take pictures without the  ash,

choose another  ash mode (pg. 24).

The Indicator Lamp

Indicator lamp

The indicator lamp shows camera status as follows:

Indicator lamp

Camera status

Glows green Focus locked.

Blinks green

Camera shake warning, AF warning,

or AE warning (ready to shoot)

Blinks green

and orange

Recording pictures. Additional

pictures can be taken.

Glows

orange

Recording pictures. No additional

pictures can be taken at this time.

Blinks orange

Flash charging;  ash will not  re when

picture is taken.

Blinks red Recording or lens error.

B Tip: Warnings

Detailed warnings appear in the monitor. See pages

86–89 for more information.

CLICK

Double

beep

CLICK

Double

beep

Basic Photography and Playback

Viewing Pictures

Pictures can be viewed in the monitor. When taking important photographs, take a test shot and

check the results.

Press the D button.

The most recent picture will be displayed in

the monitor.

ISO

100

ISO

100

100-0001

12 / 31 / 2050

10 : 00

250

3.3

View additional pictures.

Press the selector right to view

pictures in the order recorded,

left to view pictures in reverse

order.

Press the shutter button to exit to shooting

mode.

Deleting Pictures

To delete the picture

currently displayed in

the monitor, press the

selector up (

A). The

following dialog will be

displayed.

SET

ERASE OK?

OK CANCEL

To delete the picture, press the selector

left to highlight OK and press MENU/OK.

To exit without deleting the picture,

highlight CANCEL and press MENU/OK.

B Tip: The Playback Menu

Pictures can also be deleted from the playback

menu (pg. 36).

More on Photography

Intelligent Face Detection and Red-Eye Removal

Intelligent Face Detection allows the camera to automatically detect human faces and set focus and

exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for

group portraits to prevent the camera from focusing on the background. Intelligent Face Detection

also o ers a red-eye removal option for removing “red-eye” e ects caused by the  ash.

Turn Intelligent Face Detection on.

1.1 Press MENU/OK to display the

shooting menu.

SHOOTING MODE

FACE DETECTION

SHOOTING MENU

QUALITY

ISO

CONTINUOUS

AUTO

OFF

1.2 Press the selector up or

down to highlight c FACE

DETECTION.

1.3 Press the selector right

to display Intelligent Face

Detection options.

1.4 Press the selector up or down

to highlight the desired option.

Option

Description

B ON

S ON

Intelligent Face Detection and red-eye

removal on. Use with the  ash.

B ON

S OFF

Intelligent Face Detection on; red-eye

removal o .

OFF

Intelligent Face Detection and red-eye

removal o .

1.5 Press MENU/OK to select the

highlighted option and return

to shooting mode.

B icon appears in monitor

when Intelligent Face

Detection is on.

More on Photography

Intelligent Face Detection and Red-Eye Removal

Frame the picture.

If a face is detected, it will

be indicated by a green

border. If there is more

than one face in the

frame, the camera will

select the face closest

to the center; other faces are indicated by

white borders.

Focus.

Press the shutter button halfway

to set focus and exposure for the

subject in the green border.

C Cautions

• If no face is detected when the shutter button

is pressed halfway (pg. 82), the camera will

focus on the subject at the center of the

monitor and red-eye will not be removed.

• In each shooting mode, the camera will detect

and focus on faces but exposure will be

optimized for the entire scene rather than the

selected portrait subject.

Green borderGreen border

Intelligent Face Detection and Red-Eye Removal

Shoot.

Press the shutter button all the

way down to shoot.

C Caution

If the subject moves as the shutter button is

pressed, their face may not be in the area

indicated by the green border when the picture

is taken.

If B ON/S ON is

selected, the picture

will be processed to

reduce red-eye before it

is recorded (the b RED-

EYE REMOVAL option in the playback

menu can also be used to reduce red-eye;

pg. 64).

Intelligent Face Detection

Intelligent Face Detection is

recommended when using the

self-timer for group- or self-

portraits (pp. 26–27).

The camera can zoom in on pictures taken with

Intelligent Face Detection during slide shows (pg.

65) and when pictures are displayed automatically

after shooting (pg. 73).

REMOVINGREMOVING

More on Photography

Focus Lock

To compose photographs with o -center subjects:

Position the subject in the focus frame.

Focus.

Press the shutter button halfway to set

focus and exposure. Focus and exposure

will remain locked while the shutter button

is pressed halfway (AF/AE lock).

250

3.3

Press

halfway

Repeat steps 1 and 2 as desired to refocus

before taking the picture.

Recompose the picture.

Keeping the shutter button pressed

halfway, recompose the picture.

250

3.3

Shoot.

Press the shutter-release button the rest of

the way down to take the picture.

Press the rest of

the way down

Focus Lock

Autofocus

Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects

listed below. If the camera is unable to focus using autofocus, use focus lock (pg. 21) to focus on another

subject at the same distance and then recompose the photograph.

• Very shiny subjects such as mirrors or car bodies.

• Fast-moving subjects.

• Subjects photographed through a window or other re ective object.

• Dark subjects and subjects that absorb rather than re ect light, such as hair or fur.

• Insubstantial subjects, such as smoke or  ame.

• Subjects that show little contrast with the background (for example, subjects in clothing that is the same

color as the background).

• Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a

subject photographed against a backdrop of highly contrasting elements).

More on Photography

L Macro mode (Close-ups)

To select macro mode, press the selector left (L).

L icon appears in monitor when

camera is in macro mode

When macro mode is in e ect, the camera focuses on subjects near the center of the monitor. Use

the zoom buttons to frame pictures.

To exit macro mode, press the selector left (L). Macro mode can also be cancelled by turning the

camera o or selecting another shooting mode.

A Note

Use of a tripod is recommended to prevent blur caused by camera shake.

K Using the Flash

Use the  ash when lighting is poor, for example when shooting at night or indoors under low light.

To choose a  ash mode, press the selector right (K). The  ash mode

changes each time the selector is pressed; in modes other than AUTO, the

current mode is indicated by an icon in the monitor. Choose from the

following options (some options are not available in all shooting modes;

see the restrictions in another supplied document):

Mode

Description

AUTO (no icon) The  ash  res when required. Recommended in most situations.

K ( ll  ash)

The  ash  res whenever a picture is taken. Use for backlit subjects or for natural coloration

when shooting in bright light.

W (suppressed

 a s h )

The  ash does not  re even when the subject is poorly lit. 0 will appear in the monitor at

slow shutter speeds to warn that pictures may be blurred. Use of a tripod is recommended.

T (slow sync)

Capture both the main subject and the background when shooting at night (note that

brightly lit scenes may be overexposed). If U is selected for a SHOOTING MODE, shutter

speed may be slow. Use a tripod.

If the  ash will  re, X will be displayed in the monitor when the shutter button is pressed halfway.

C Caution

The  ash may  re several times with each shot. Do not move the camera until shooting is complete.

More on Photography

Red-Eye Removal

When B ON/S ON is selected for

Intelligent Face Detection (pg. 18), red-

eye removal (

S) is available in AUTO

(

V),  ll  ash (U), and slow sync (Z)

modes. Red-eye removal minimizes “red-

eye” caused when light from the  ash

is re ected from the subject’s retinas as

shown in the illustration at right.

( Silent Mode

In situations in which camera sounds or light from

the  ash may be unwelcome, press the DISP/BACK

button until ( is displayed in the monitor.

The camera speaker, shooting indicator,  ash, and

indicator and self-timer lamps turn o . Flash and

volume settings (pg. 75) can not be adjusted while

silent mode is in e ect. To restore normal operation,

press the DISP/BACK button until the ( icon is no

longer displayed.

K Using the Flash

J Using the Self-Timer

The camera o ers a ten-second timer that allows photographers to appear in their own photographs,

and a two-second timer that can be used to avoid blur caused by the camera moving when the

shutter button is pressed.

Set the timer.

The current self-timer mode is displayed in the monitor. To choose a di erent setting, press the

selector down (J). The selection changes each time the selector is pressed.

The current self-timer mode is

displayed in the monitor.

c : The picture is taken after 10

seconds.

b : The picture is taken after 2

seconds.

Focus.

Press the shutter button halfway to focus.

C Caution

Stand behind the camera when using the shutter button. Standing in front

of the lens can interfere with focus and exposure.

Start the timer.

Press the shutter button the rest of the way down to start the timer.

The display in the monitor shows the number of seconds remaining

until the shutter is released. To stop the timer before the picture is

taken, press DISP/BACK.

More on Photography

The self-timer lamp on the front of the camera will

blink immediately before the picture is taken. If

the two-second timer is selected, the self-timer

lamp will blink as the timer counts down.

Intelligent Face Detection

Because it ensures that the faces of portrait subjects will be in focus, Intelligent Face Detection (pg. 18) is

recommended when using the self-timer for group portraits or self-portraits. To use the self-timer with

Intelligent Face Detection, set the timer as described in Step 1 and then press the shutter button all the way

down to start the timer. The camera will detect faces while the timer is counting down and adjust focus

and exposure immediately before the shutter is released. Be careful not to move until the picture has been

recorded.

J Using the Self-Timer

a Shooting Mode

Choose a shooting mode according to the scene or type of subject.

Selecting a Shooting Mode

Press MENU/OK to display the

shooting menu.

SHOOTING MODE

FACE DETECTION

SHOOTING MENU

QUALITY

ISO

CONTINUOUS

AUTO

OFF

Press the selector up or down to

highlight a SHOOTING MODE.

Press the selector right to display

shooting mode options.

MANUAL

BABY MODE

AUTO

CANCELSET

Automatic mode

setting according to

shooting conditions.

SCENE RECOGNITION

Press the selector up or down to

highlight the desired mode.

Press MENU/OK to select the

highlighted option.

A Note

See the restrictions in another supplied document for

 ash mode setting.

More on Photography

Shooting Modes

MANUAL

Choose this mode for complete control

of shooting settings, including exposure

compensation (pg. 59) and white balance (pg.

60).

SCENE RECOGNITION

Simply by pointing the camera to the subject,

the camera automatically analyzes and selects

the most appropriate setting using scene

recognition.

The camera analyzes a

subject based on scene

recognition, then an icon

appears in the bottom

left of the monitor (The

illustration shows when the

camera analyzed subject(s) in portrait.).

Subject

Icon

Description

PORTRAIT

For soft-toned portraits with

natural skin tones.

LANDSCAPE

For crisp, clear daylight shots of

buildings and landscapes.

NIGHT

For night and twilight scenes, a

using high sensitivity setting to

minimize blurring.

MACRO

For clear close-ups of  owers,

etc.

BACKLIGHT

PORTRAIT

For a subject backlit against the

sun, preventing the background

from becoming dim.

NIGHT

PORTRAIT

For a subject in a dim place,

reducing blur.

Tip

When a subject can not be analyzed by the camera,

L AUTO mode will be set.

A Notes

• B Intelligent Face Detection is turned on

automatically.

• The camera continuously adjusts focus on a face, or

the center area of the monitor.

• Continuous auto focus will be audible and will

increase battery drain.

• Macro mode is set when K is set.

a Shooting Mode

AUTO

Choose for crisp, clear snapshots (pg. 13). This

mode is recommended in most situations.

BABY MODE

Choose for natural skin tones when taking

portraits of infants. The  ash turns o

automatically.

PICTURE STABILIZATION

Choose this mode for fast shutter speeds that

reduce blur caused by camera shake or subject

movement.

PORTRAIT

Choose this mode for soft-toned portraits with

natural skin tones.

LANDSCAPE

Choose this mode for crisp, clear daylight shots

of buildings and landscapes.

SPORT

Choose this mode when photographing moving

subjects. Priority is given to faster shutter

speeds.

NIGHT

A high sensitivity setting is selected

automatically to minimize blurring for recording

night and twilight scenes.

NIGHT (TRIPOD)

Slow shutter speeds are used to record night

scenes. Use of a tripod is recommended to

prevent camera shake.

NATURAL LIGHT

Capture natural light indoors, under low light, or

where the  ash can not be used. The  ash turns

o and sensitivity is raised to reduce blur.

BEACH

Choose for crisp, clear shots that capture the

brightness of sunlit beaches.

a Shooting Mode

More on Photography

SNOW

Choose for crisp, clear shots that capture the

brightness of scenes dominated by shining white

snow.

FIREWORKS

Slow shutter speeds are used to capture the

expanding burst of light from a  rework. Press

the selector left or right to choose a shutter

speed. Use of a tripod is recommended to

prevent blur. The  ash turns o automatically.

SUNSET

Choose this mode to record the vivid colors in

sunrises and sunsets.

FLOWER

Choose for vivid close-ups of  owers. The

camera focuses in the macro range and the  ash

turns o automatically.

PARTY

Capture indoor background lighting under low-

light conditions.

MUSEUM

Choose where  ash photography is prohibited

or the sound of the shutter may be unwelcome.

The  ash, speaker, and self-timer lamp turn o

automatically.

A Note

Photography may be prohibited altogether in some

settings. Obtain permission before shooting.

TEXT

Take clear pictures of text or drawings in print.

The camera focuses in the macro range.

a Shooting Mode

More on Playback

Single-Frame Playback

To view the most recent picture in the monitor,

press the D button.

12 / 31 / 2050

10:00 AM

ISO 100

100-

0001

ISO 100

100-0001

12 / 31 / 2050 10:00 AM

250

F4.2

250 F4.2

Press the selector right to view pictures

in the order recorded, left to view

pictures in reverse order. Keep the

selector pressed to scroll rapidly to the desired

frame.

Choosing a Display Format

Press the DISP/BACK button to cycle through playback

display formats as shown below.

1/13

2050

12/31

12 / 31 / 2050

250

F4.2

250 F4.2

ISO 100

100

100-

0001

100-0001

12 / 31 / 2050

10 : 00 AM

Indicators

displayed

Indicators

hidden

Sort by date

A Note

Pictures taken using other cameras are indicated by a e (“gift image”) icon during playback.

More on Playback

Single-Frame Playback

Playback Zoom

Press T to zoom in on images

displayed in single-frame

playback; press W to zoom out.

Press W to zoom out Press T to zoom in

Zoom indicator

When the picture is zoomed in, the

selector can be used to view areas of

the image not currently visible in the

display.

Navigation window shows

portion of image currently

displayed in monitor

Press DISP/BACK to exit zoom.

A Note

The maximum zoom ratio varies with image size.

Playback zoom is not available with pictures taken at

an image size of p.

Multi-Frame Playback

To change the number of images

displayed, press W when a

picture is shown full-frame in the

monitor.

Press the

W button

to increase

the number

of pictures

displayed to

two, nine, or a

hundred.

ISO

100

ISO

100

100-0001

12 / 31/ 2050

12/31/2050

10 : 00

Press T to reduce

the number

of images

displayed.

Use the selector to highlight images and press

MENU/OK to view the highlighted image full frame.

In the nine- and hundred-frame displays, press

the selector up or down to view more pictures.

More on Playback

Sort by Date

In single-frame playback, press DISP/

BACK until the sort-by-date screen is

displayed.

The picture displayed in

the single-frame playback

remains selected.

1/13

2050

12/31

Press the selector up or down to

select a date.

Press the selector left or right to

select a picture.

B Tips: Rapid Scroll

• Press and hold the selector up or down to scroll

dates rapidly.

• Press and hold the selector left or right to rapidly

scroll pictures taken on the same date.

A Deleting Pictures

The ERASE option in the playback menu can be used to delete still pictures and movies, increasing

the amount of space available on the memory card or in internal memory (for information on

deleting pictures in single-frame playback, see page 17). Note that deleted pictures can not be

recovered. Copy important pictures to a computer or other storage device before proceeding.

Press MENU/OK to display the

playback menu.

PLAYBACK MENU

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

ERASE

Press the selector up or down to

highlight ERASE.

Press the selector right to display

delete options.

PLAYBACK MENU

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER

(

DPOF

)

PROTECT

ERASE

FRAME

BACK

ALL FRAMES

Press the selector up or down to

highlight FRAME or ALL FRAMES.

Press MENU/OK to display options for

the selected item (see pg. 37).

B Tips: Deleting Pictures

• When a memory card is inserted, pictures will be

deleted from the memory card; otherwise, pictures

will be deleted from internal memory.

• Protected pictures can not be deleted. Remove

protection from any pictures you wish to delete (pg.

66).

• If a message appears stating that the selected

images are part of a DPOF print order, press MENU/OK

to delete the pictures.

More on Playback

■

FRAME

: Deleting Selected Images

Selecting FRAME displays the

dialog shown at right.

YES CANCEL

ERASE OK?

Press the selector left or right to scroll

through pictures and press MENU/OK to

delete the current picture (the picture

is deleted immediately; be careful not

delete the wrong picture).

Press DISP/BACK to exit when all the desired

pictures have been deleted.

■

ALL FRAMES

: Deleting All Images

Selecting ALL FRAMES

displays the con rmation

shown at right.

ERASE ALL OK?

IT MAY TAKE A WHILE

YES CANCEL

Press MENU/OK to delete all

unprotected pictures.

The dialog shown at right is

displayed during deletion.

Press DISP/BACK to cancel

before all pictures have been

deleted (any pictures deleted

before the button was pressed

can not be recovered).

CANCEL

A Deleting Pictures

Movies

A Recording Movies

Shoot short movies at 30 frames per second. Sound is recorded via the built-in microphone; do not

cover the microphone during recording.

Press MENU/OK to display the shooting menu

and select A MOVIE for a SHOOTING

MODE (pg. 28).

STANDBY

Time available

is displayed in

monitor

Choosing the Frame Size

To choose the frame size,

press MENU/OK and select

k QUALITY. Choose t

(640 × 480 pixels) for better

quality, s (320 × 240

pixels) for longer movies. Press MENU/OK to return

to movie recording mode.

SHOOTING MENU

SHOOTING MODE

SET-UP

QUALITY

999m59

99m59

Frame the scene using the

zoom buttons.

STANDBY

Zoom indicator

Zoom can not be adjusted once recording

begins.

Movies

Press the shutter button all the way

down to start recording.

REC

REC and time

remaining are

displayed in monitor

A Note

Focus is set when recording begins; exposure and

white balance are adjusted automatically throughout

recording. The color and brightness of the image may

vary from that displayed before recording begins.

Press the shutter button to end

recording. Recording ends

automatically when the movie

reaches maximum length or

memory is full.

B Tip

There is no need to keep the shutter button pressed

during recording.

A Recording Movies

D Viewing Movies

During playback (pg. 32),

movies are displayed in the

monitor as shown at right.

The following operations can

be performed while a movie

is displayed:

PLAY

100-006

12 / 31 / 2050

10 : 00

Operation

Description

Start/pause

playback

Press the selector down to start playback.

Press again to pause.

End

playback/

delete

Press the selector up to end playback. If

playback is paused, pressing the selector

up will delete the current movie.

Advance/

rewind

Press the selector right to advance, left to

rewind. If playback is paused, the movie

will advance or rewind one frame each

time the selector is pressed.

Adjust

volume

Press MENU/OK to pause playback and

display volume controls. Press the

selector up or down to adjust the

volume; press MENU/OK again to resume

playback.

Progress is shown in the monitor during

playback.

STOP PAUSE

Progress bar

C Cautions

• Do not cover the speaker during playback.

• Vertical or horizontal streaks may appear in movies

containing very bright subjects. This is normal and

does not indicate a malfunction.

Connections

Viewing Pictures on TV

Connect the camera to a TV and tune the television to the video channel to show pictures to a group.

Connect an A/V cable (optional), as shown below.

Connect yellow plug

to video-in jack

Connect white plug

to audio-in jack

Insert into A/V cable

connector

Press D for about a second to turn the camera on. The camera monitor turns o and pictures and

movies are played back on the TV. Note that the camera volume controls have no e ect on sounds

played on the TV; use the television volume controls to adjust the volume.

A Note

Image quality drops during movie playback.

C Caution

When making the A/V cable connection, be sure the connectors are fully inserted.

Printing Pictures via USB

If the printer supports PictBridge, the camera can be connected directly to the printer and

pictures can be printed without  rst being copied to a computer. Note that depending on

the printer, not all the functions described below may be supported.

Connecting the Camera

Connect the supplied USB cable as shown

and turn the printer on.

Press the D button for about a second to

turn the camera on. w USB will be displayed

in the monitor, followed by the PictBridge

display shown below at right.

USB

OK SET

FRAME

PICTBRIDGE

TOTAL:

00000

SHEETS

Printing Selected Pictures

Press the selector left or right to

display a picture you wish to print.

Press the selector up or down to

choose the number of copies (up to

99).

Repeat steps 1–2 to select

additional pictures. Press MENU/OK

to display a con rmation dialog

when settings are complete.

PRINT THESE FRAMES

TOTAL:

SHEETS

YES CANCEL

Press MENU/OK to start printing.

Connections

Printing Pictures via USB

B Tip: Printing the Date of Recording

To print the date of recording on pictures, press

DISP/BACK in steps 1–2 to display the PictBridge

menu (see “Printing the DPOF Print Order,” below).

Press the selector up or down to highlight PRINT

WITH DATE y and press MENU/OK to return to the

PictBridge display (to print pictures without the date

of recording, select PRINT WITHOUT DATE). The

date will not be printed if the camera clock was not

set when the picture was taken.

A Note

If no pictures are selected when the MENU/OK button is

pressed, the camera will print one copy of the current

picture.

Printing the DPOF Print Order

To print the print order created with C PRINT

ORDER (DPOF) in the playback menu (pg. 62):

In the PictBridge display, press DISP/

BACK to open the PictBridge menu.

PRINT DPOF

PRINT WITH DATE

PRINT WITHOUT DATE

PICTBRIDGE

Press the selector up or down to

highlight x PRINT DPOF.

Press MENU/OK to display a

con rmation dialog.

YES CANCEL

PRINT DPOF OK?

TOTAL:

SHEETS

Printing Pictures via USB

Press MENU/OK to start printing.

During Printing

The message shown at right is

displayed during printing. Press

DISP/BACK to cancel before all

pictures are printed (depending

on the printer, printing may end

before the current picture has printed).

If printing is interrupted, press D to turn the camera

o and then on again.

PRINTING

CANCEL

Disconnecting the Camera

Con rm that “PRINTING” is not displayed in the

monitor and press D to turn the camera o .

Disconnect the USB cable.

A Notes

• Print pictures from internal memory or a memory

card that has been formatted in the camera.

• If the printer does not support date printing, the

PRINT WITH DATE y option will not be available

in the PictBridge menu and the date will not be

printed on the pictures in the DPOF print order.

• Default printer page size and print quality settings

are used when printing via direct USB connection.

Connections

Printing Pictures via USB

The

C PRINT ORDER (DPOF) option in the

playback menu can be used to create a digital

“print order” for PictBridge-compatible printers

(pg. 42) or devices that support DPOF.

DPOF

DPOF (Digital Print Order Format) is

standard that allows pictures to be printed

from “print orders” stored in internal

memory or on a memory card. The information in

the order includes the pictures to be printed and the

number of copies of each picture.

■

WITH DATE

WITH DATE y

/ WITHOUT DATE

To modify the DPOF print order, select

C PRINT

ORDER (DPOF) in the playback menu and press

the selector up or down to highlight WITH

DATE y or WITHOUT DATE.

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER

(

DPOF

)

PROTECT

ERASE

PLAYBACK MENU

WITHOUT DATE

RESET ALL

WITH DATE

WITH DATE y: Print date of

recording on pictures.

WITHOUT DATE: Print pictures without

date.

Press MENU/OK and follow the steps below.

Press the selector left or right

to display a picture you wish to

include in or remove from the print

order.

Creating a DPOF Print Order

Printing Pictures via USB

Press the selector up or down to

choose the number of copies (up to

99). To remove a picture from the

order, press the selector down until

the number of copies is 0.

SHEETS

DPOF:

00001

PRINT ORDER

(

DPOF

)

SET

FRAME

Total number of prints

Number of copies

Repeat steps 1–2 to complete the

print order. Press MENU/OK to save

the print order when settings

are complete, or DISP/BACK to exit without

changing the print order.

The total number of prints is

displayed in the monitor. Press

MENU/OK to exit.

The pictures in the current

print order are indicated by a

x icon during playback.

ISO

100

ISO

100

100-0001

12 / 31 / 2050

10 : 00

Connections

Printing Pictures via USB

■

RESET ALL

To cancel the current print order, select RESET ALL in the C PRINT ORDER

(DPOF) menu. The con rmation shown at right will be displayed; press MENU/OK to

remove all pictures from the order.

A Notes

• Remove the memory card to create or modify a print order for the pictures in internal

memory.

• Print orders can contain a maximum of 999 pictures.

• If a memory card is inserted containing a print order created by another camera, the

message shown at right will be displayed. Pressing MENU/OK cancels the print order; a new

print order must be created as described above.

YES CANCEL

RESET DPOF OK?

YES CANCEL

RESET DPOF OK?

YES NO

RESET DPOF OK?

YES NO

RESET DPOF OK?

Viewing Pictures on a Computer

The supplied FinePixViewer software can be used to copy pictures to a computer, where they can be

stored, viewed, organized, and printed. Before proceeding, install FinePixViewer as described below.

The latest FinePixViewer is available at http://www.fuji lm.com/. Do NOT connect the camera to the

computer until installation is complete.

Installing FinePixViewer

FinePixViewer is available in a Windows version (FinePixViewer S) and a Macintosh version

(FinePixViewer). Installation instructions for Windows are on pages 48–50, those for the Macintosh on

pages 51–52.

Installing FinePixViewer S: Windows

Con rm that the computer meets the following system requirements:

Preinstalled versions of Windows Vista, Windows XP Home Edition (Service Pack 2), Windows XP Professional

(Service Pack 2), or Windows 2000 Professional (Service Pack 4)

CPU

• Windows Vista: 800 MHz Pentium 4 or better (3 GHz Pentium 4 or better recommended)

• Windows XP: 800 MHz Pentium 4 or better (2 GHz Pentium 4 or better recommended)

• Windows 2000: 200 MHz Pentium or better

RAM

• Windows Vista: 512 MB or more (1 GB or more recommended)

• Windows XP: 512 MB or more

• Windows 2000: 128 MB or more

Free disk

space

A minimum of 450 MB required for installation with 600 MB available when FinePixViewer is running (15 GB or

more recommended under Windows Vista, 2 GB or more recommended under Windows XP)

Video

Video 800 × 600 pixels or more with 16-bit color or better (1,024 × 768 pixels or more with 32-bit color recommended)

Other

• Built-in USB port recommended. Operation is not guaranteed other USB ports.

• Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet

connection and e-mail software required to use e-mail option

Connections

Viewing Pictures on a Computer

C Caution

Other versions of Windows are not supported. Operation is not guaranteed on home-built computers or

computers that have been upgraded from earlier versions of Windows.

Start the computer. Log in to an account with administrator privileges before proceeding.

Exit any applications that may be running and insert the installer CD in a CD-ROM drive.

Windows Vista

If an AutoPlay dialog is displayed, click SETUP.exe. A “User Account Control” dialog will then be displayed;

click Allow.

The installer will start automatically; click Installing FinePixViewer and follow the on-screen

instructions to install FinePixViewer S. Note that the Windows CD may be required during

installation.

If the Installer Does Not Start Automatically

If the installer does not start automatically, select Computer or My Computer from the Start menu

(Windows Vista/XP) or double-click the My Computer icon on the desktop (Windows 2000), then double-

click the FINEPIX CD icon to open the FINEPIX CD window and double-click SETUP or SETUP.exe.

Viewing Pictures on a Computer

If prompted to install Windows Media Player or DirectX, follow the on-screen instructions to

complete installation.

When prompted, remove the installer CD from the CD-ROM drive and click Restart to restart the

computer. Store the installer CD in a dry location out of direct sunlight in case you need to re-

install the software. The version number is printed at the top of the CD label for reference when

updating the software or contacting customer support.

Installation is now complete. Proceed to “Connecting the Camera” on page 53.

Connections

Viewing Pictures on a Computer

Installing FinePixViewer: Macintosh

Con rm that the computer meets the following system requirements:

CPU

CPU PowerPC or Intel

OS Preinstalled versions of Mac OS X 10.3.9-10.5 (visit http://www.fujifilm.com/ for more information)

RAM

RAM 256 MB or more

Free disk space

Free disk space A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running

Video

Video 800 × 600 pixels or more with thousands of colors or better

Other

• Built-in USB port recommended. Operation is not guaranteed other USB ports.

• Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet

connection and e-mail software required to use e-mail option

After starting the computer and quitting any applications that may be running, insert the installer

CD in a CD-ROM drive. Double-click the FinePix CD icon on the desktop and double-click

Installer for Mac OS X.

An installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter

an administrator name and password when prompted and click OK, then follow the on-screen

instructions to install FinePixViewer. Click Exit to quit the installer when installation is complete.

Viewing Pictures on a Computer

Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD

if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry

location out of direct sunlight in case you need to re-install the software. The version number

is printed at the top of the CD label for reference when updating the software or contacting

customer support.

Select Applications in the Finder Go menu to open the applications folder.

Double-click the Image Capture icon and select Preferences… from the

Image Capture application menu.

The Image Capture preferences dialog will be displayed. Choose Other… in

the When a camera is connected, open menu, then select FPVBridge in

the “Applications/FinePixViewer” folder and click Open.

Select Quit Image Capture from the Image Capture application menu.

Installation is now complete. Proceed to “Connecting the Camera” on page 53.

Connections

Viewing Pictures on a Computer

If the pictures you wish to copy are stored

on a memory card, insert the card into the

camera (pg. 8). If no card is inserted, pictures

will be copied from internal memory.

C Caution

Loss of power during transfer could result in loss

of data or damage to internal memory or the

memory card. Check the battery level.

Turn the camera o and connect the supplied

USB cable as shown, making sure the

connectors are fully inserted. Connect the

camera directly to the computer; do not use a

USB hub or keyboard.

Press the D button for about a second to

turn the camera on. FinePixViewer will start

automatically and the “Save Image Wizard”

will be displayed. Follow the on-screen

instructions to copy pictures to the computer.

To exit without copying pictures, click

CANCEL.

C Caution

If FinePixViewer does not start automatically,

the software may not be correctly installed.

Disconnect the camera and reinstall the software.

For more information on using FinePixViewer,

select How to Use FinePixViewer in the

FinePixViewer Help menu.

Connecting the Camera

A Note

The camera will not turn o automatically while connected to a computer.

Viewing Pictures on a Computer

C Cautions

• Use only memory cards that have been formatted

in the camera and contain pictures taken with

the camera. If a memory card containing a large

number of images is inserted, there may be a delay

before FinePixViewer starts and FinePixViewer may

be unable to import or save images. Use a memory

card reader to transfer pictures.

• Make sure the indicator lamp is out before turning

the camera o , disconnecting the USB cable or

pulling the memory card out. Failure to observe this

precaution could result in loss of data or damage to

internal memory or the memory card.

• Disconnect the camera before inserting or removing

memory cards.

• In some cases, it may not be possible to access

pictures saved to a network server using

FinePixViewer in the same way as on a standalone

computer.

• The user bears all applicable fees charged by the

phone company or Internet service provider when

using services that require an Internet connection.

Disconnecting the Camera

After con rming that the indicator lamp is out,

follow the on-screen instructions to turn the camera

o and disconnect the USB cable.

Uninstalling FinePixViewer

Only uninstall FinePixViewer before reinstalling

the software or when it is no longer required.

After quitting FinePixViewer and disconnecting

the camera, drag the “FinePixViewer” folder from

“Applications” into the Trash and select Empty Trash

in the Finder menu (Macintosh), or open the control

panel and use “Programs and Features” (Windows

Vista) or “Add/Remove Programs” (other versions

of Windows) to uninstall FinePixViewer. Under

Windows, one or more con rmation dialogs may be

displayed; read the contents carefully before clicking

OK.

Menus

The Shooting Menu

The shooting menu is used to adjust settings for a wide range of shooting conditions.

Using the Shooting Menu

Press MENU/OK to display the

shooting menu.

SHOOTING MODE

FACE DETECTION

SHOOTING MENU

QUALITY

ISO

CONTINUOUS

AUTO

OFF

A Note

The options displayed in the shooting menu vary

depending on the shooting mode.

Press the selector up or down to

highlight the desired menu item.

Press the selector right to display

options for the highlighted item.

AUTO

OFF

AUTO

SHOOTING MODE

FACE DETECTION

QUALITY

ISO

CONTINUOUS

AUTO

OFF

SHOOTING MENU

OFF

TOP

Press the selector up or down to

highlight the desired option.

Press MENU/OK to select the

highlighted option.

The Shooting Menu

Shooting Menu Options

Menu item

Description

Options

Default

SHOOTING MODE

Choose a shooting mode according to the

type of subject (pg. 28).

M/G/k/p/C/U/K/L/

D/U/B/G/F/W/E/O/

I/H/P/A

FACE DETECTION

Turn Intelligent Face Detection and red-eye

removal on or o (pg. 18).

B ON S ON / B ON S OFF /

OFF

B ON

S ON

ISO

Adjust ISO sensitivity (pg. 57). Choose higher

values when the subject is poorly lit.

AUTO/ 1600 / 800 / 400 / 200 /

100

AUTO

QUALITY Choose image size and quality (pg. 58).

rF/rN/g

3:2

/o/n/

m/p

EXP. COMPENSATION

Adjust exposure for bright, dark, or high-

contrast scenes (pg. 59).

–2 EV to +2 EV in increments of

3 EV

±0

WHITE BALANCE Adjust color for di erent light sources (pg. 60).

AUTO/p/q/s/t/u/r

AUTO

CONTINUOUS Shoot a series of pictures (pg. 61).

m/OFF

OFF

SET-UP

Perform basic camera setup such as choosing

a language and setting the time and date (pg.

71).

A/K/L/M

—

Menus

The Shooting Menu

ISO

Control the camera’s sensitivity to light with M. Higher values can be used to reduce blur when

lighting is poor; note, however, that mottling may appear in pictures taken at high sensitivities. If

AUTO is selected, the camera will adjust sensitivity automatically in response to shooting conditions.

Settings other than AUTO are shown by an icon in the monitor if you use M.

ISO

100

ISO

100

ISO

100

ISO

100

The Shooting Menu

Choose the size and quality at which still pictures

are recorded. Large pictures can be printed at

large sizes with no drop in quality; small pictures

require less memory, allowing more pictures to

be recorded.

Option

Prints at sizes up to

rF 31 × 23 cm/12 × 9 in. (r) or 31 × 21 cm/

12 × 8 in. (g

3:2

). Choose rF for high-

quality prints, g

3:2

for an aspect ratio of

3 : 2.

3:2

22 × 16 cm (8.5 × 6.5 in.)

17 × 13 cm (7 × 5 in.)

14 × 10 cm (5.3 × 4 in.)

5 × 4 cm (2 × 1.5 in.). Suited to e-mail or the

web.

The number of pictures that can be taken at

current settings (pg. 91) is displayed to the right

of the image quality icon in the monitor.

Aspect Ratio

Pictures taken at an image quality setting of g

3:2

have an aspect ratio of 3 : 2, the same as a frame of

35-mm  lm. Pictures taken at other settings have an

aspect ratio of 4 : 3.

3: 2

3:2

4 : 3 3 : 2

A Note

Image quality is not reset when the camera is turned

o or another shooting mode is selected.

QUALITY

Menus

The Shooting Menu

EXP. COMPENSATION

Use exposure compensation when

photographing very bright, very dark, or high-

contrast subjects.

Choose positive (+) values

to increase exposure

Choose negative (–) values

to reduce exposure

Choosing an Exposure Compensation Value

• Backlit subjects: choose values

from +

3 EV to +1

3 EV (for an

explanation of the term “EV”,

see the Glossary on page 90)

• Highly re ective subjects or very

bright scenes (e.g., snow elds):

+1 E V

• Scenes that are mostly sky: +1 EV

• Spotlit subjects (particularly if photographed against

dark backgrounds): –

3 EV

• Subjects with low re ectivity (pine trees or dark-

colored foliage): –

3 EV

A Note

At settings other than ±0, a 5 icon is displayed in the monitor. Exposure compensation is not reset when the

camera is turned o ; to restore normal exposure control, choose a value of ±0.

The Shooting Menu

WHITE BALANCE

For natural colors, choose a setting that matches

the light source (for an explanation of “white

balance,” see the Glossary on page 90).

Option

Description

AUTO White balance adjusted automatically.

For subjects in direct sunlight.

For subjects in the shade.

Use under “daylight”  uorescent lights.

Use under “warm white”  uorescent lights.

Use under “cool white”  uorescent lights.

Use under incandescent lighting.

If AUTO does not produce the desired results

(for example, when taking close-ups), choose the

option that matches the light source.

A Note

Results vary with shooting conditions. Play pictures

back after shooting to check colors in the monitor.

Menus

The Shooting Menu

CONTINUOUS (Continuous shooting)

Select m TOP 3 to capture motion in a series of pictures. The camera takes up to three pictures

while the shutter-release button is pressed.

A Notes

• Frame rate varies with shutter speed.

• Focus and exposure are determined by the  rst frame in each series.

• The number of pictures that can be recorded depends on the memory available.

Additional time may be required to record pictures when shooting ends. The pictures are

displayed in the monitor while recording is in progress.

STORINGSTORING

The Playback Menu

The playback menu is used to manage the pictures in internal memory or on the memory card.

Using the Playback Menu

Press D to enter playback mode

(pg. 32).

Press MENU/OK to display the

playback menu.

PLAYBACK MENU

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

ERASE

Press the selector up or down to

highlight the desired menu item.

Press the selector right to display

options for the highlighted item.

PLAYBACK MENU

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER

(

DPOF

)

PROTECT

ERASE

FRAME

BACK

ALL FRAMES

Press the selector up or down to

highlight the desired option.

Press MENU/OK to select the

highlighted option.

Menus

The Playback Menu

Playback Menu Options

The following options are available:

Option

Description

ERASE Delete all or selected pictures (pg. 36).

RED-EYE REMOVAL Create copies with reduced red eye (pg. 64).

SLIDE SHOW View pictures in a slide show (pg. 65).

PRINT ORDER (DPOF) Select pictures for printing on DPOF- and PictBridge-compatible devices (pg. 45).

PROTECT Protect pictures from accidental deletion (pg. 66).

COPY Copy pictures between internal memory and a memory card (pg. 67).

IMAGE ROTATE Rotate pictures (pg. 69).

TRIMMING Create cropped copies of pictures (pg. 70).

SET-UP Perform basic camera setup (pg. 71).

The Playback Menu

Play the picture back in the monitor (pictures

taken with Intelligent Face Detection are

indicated by a B icon) and select b RED

EYE REMOVAL in the playback menu (pg. 62).

YES CANCEL

REMOVAL OK?

Press MENU/OK. The message shown

below at left will be displayed while

the camera analyses the image;

if red-eye is detected, the message shown

below at right will be displayed while the

camera processes the image to create a copy

with reduced red-eye.

DETECTING

CANCEL

REMOVING

RED EYE REMOVAL

This option is used with pictures taken using Intelligent Face Detection to create copies that have

been processed to remove red eye.

A Notes

• Red eye may not be removed if the camera is unable to detect a face or the face is in pro le. Results may di er

depending on the scene. Red eye can not be removed from pictures that have already been processed using

red-eye removal or pictures created with other devices.

• The amount of time needed to process the image varies with the number of faces detected.

• Copies created with b RED EYE REMOVAL are indicated by a l icon during playback.

Menus

The Playback Menu

SLIDE SHOW

View pictures in an automated

slide show. Choose the type

of show and press MENU/OK

to start. Press DISP/BACK at

any time during the show to

view on-screen help. When a movie is displayed,

movie playback will begin automatically, and the

slide show will continue when the movie ends.

The show can be ended at any time by pressing

MENU/OK.

A Note

The camera will not turn o automatically while a

slide show is in progress.

PLAYBACK MENU

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

ERASE

WIPE

NORMAL

PLAYBACK MENU

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

ERASE

WIPE

NORMAL

Option

Description

NORMAL

Press selector left or right to go back or

skip ahead one frame. Select WIPE for

wipe transitions between frames.

WIPE

NORMAL B

As above, except that camera

automatically zooms in on faces

selected with Intelligent Face detection

(pg. 18).

WIPE B

The Playback Menu

PROTECT

Protect pictures from accidental deletion. The

following options are available.

■

FRAME

Protect selected pictures.

Press the selector left or right to

display the desired picture.

YES CANCEL

PROTECT OK?

UNPROTECT OK?

YES CANCEL

Picture not protected Protected picture

Press MENU/OK to protect the

picture. If the picture is already

protected, pressing MENU/OK will

remove protection from the image.

Repeat steps 1–2 to protect

additional images. Press DISP/BACK

to exit when the operation is

complete.

■

SET ALL

Press MENU/OK to protect all

pictures, or press DISP/BACK to

exit without changing picture

status.

YES CANCEL

SET ALL OK?

IT MAY TAKE A WHILE

■

RESET ALL

Press MENU/OK to remove

protection from all pictures, or

press DISP/BACK to exit without

changing picture status.

YES CANCEL

RESET ALL OK?

IT MAY TAKE A WHILE

If the number of pictures

a ected is very large, the

display at right will appear

in the monitor while the

operation is in progress.

Press DISP/BACK to exit before the operation is

complete.

C Caution

Protected pictures will be deleted when the memory

card or internal memory is formatted (pg. 76).

CANCELCANCEL

Menus

The Playback Menu

COPY

Copy pictures between internal memory and a memory card.

Press the selector up or down to

highlight d INTERNAL MEMORY

g x CARD (copy pictures from

internal memory to the memory card) or

x CARD g d INTERNAL MEMORY (copy

pictures from a memory card to internal

memory).

Press the selector right to display

options for the highlighted item.

YES CANCEL

COPY

CARD

INTERNAL MEMORY

CARD

INTERNAL MEMORY

CARD

FRAME

ALL FRAMES

Press the selector up or down to

highlight FRAME or ALL FRAMES.

Press MENU/OK.

B Tip: Copying Pictures Between Memory Cards

To copy pictures between two memory cards, insert

the source card and copy the pictures to internal

memory, then remove the source card, insert the

destination card, and copy the pictures from internal

memory.

The Playback Menu

■

FRAME

Copy selected frames.

100-0001

COPY OK?

YES CANCEL

Press the selector left or right to

display the desired picture.

Press MENU/OK to copy the picture.

Repeat steps 1–2 to copy additional

images. Press DISP/BACK to exit

when the operation is complete.

■

ALL FRAMES

Press MENU/OK to copy all

pictures, or press DISP/BACK to

exit without copying pictures.

100-0001

YES CANCEL

IT MAY TAKE

A WHILE

COPY ALL OK?

C Cautions

• Copying ends when the destination is full.

• DPOF print information is not copied (pg. 45).

Menus

The Playback Menu

IMAGE ROTATE

By default, pictures taken in

tall orientation are displayed

in wide orientation. Use this

option to display pictures in

the correct orientation in the

monitor. It has no e ect on pictures displayed

on a computer or other device.

A Notes

• Protected pictures can not be rotated. Remove

protection before rotating pictures (pg. 66).

• The camera may not be able to rotate pictures

created with other devices.

To rotate a picture, play the picture back and

select D IMAGE ROTATE in the playback menu

(pg. 62).

CANCELSET

IMAGE ROTATE

CANCELSET

IMAGE ROTATE

Press the selector down to

rotate the picture 90 ° clockwise,

up to rotate the picture 90 °

counterclockwise.

Press MENU/OK to con rm the

operation (to exit without rotating

the picture, press DISP/BACK).

The next time the picture is played back, it will

automatically be rotated.

The Playback Menu

TRIMMING

To create a cropped copy of a picture, play the picture back and select H TRIMMING in the playback

menu (pg. 62).

Press the zoom buttons to zoom in and out

and use the selector to scroll the picture

until the desired portion is displayed (to exit

to single-frame playback without creating a

cropped copy, press DISP/BACK).

Navigation

window shows

portion of image

currently displayed

in monitor

YES CANCEL

TRIMMING

Zoom indicator

Press MENU/OK. A con rmation

dialog will be displayed.

CANCELREC

REC OK?

Copy size (o, n, m, or p; see page

58) is shown at the top; if the size is p, OK

is displayed in yellow. Larger crops produce

larger copies; all copies have an aspect ratio

of 4 : 3.

Press MENU/OK to save the cropped

copy to a separate  le.

Menus

The Setup Menu

Using the Setup Menu

Display the setup menu.

1.1 Press MENU/OK to display the

menu for the current mode.

1.2 Press the selector up or down

to highlight j SET-UP.

1.3 Press the selector right to

display the setup menu.

SET-UP

OFF

DIGITAL ZOOM

IMAGE DISP.

CONT.

1.5 SEC

FRAME NO.

LCD POWER SAVE

Choose a page.

2.1 Press the selector left or right

to choose a page.

2.2 Press the selector down to

enter the menu.

Adjust settings.

3.1 Press the selector up or down

to highlight a menu item.

3.2 Press the selector right

to display options for the

highlighted item.

/LANG

2 MIN

NTSC

ENGLISH

SET-UP

AUTO POWER OFF

TIME DIFFERENCETIME DIFFERENCE

VIDEO SYSTEMVIDEO SYSTEM

FORMATFORMAT

MIN

OFF

3.3 Press the selector up or down

to highlight an option.

3.4 Press MENU/OK to select the

highlighted option.

The Setup Menu

Setup Menu Options

Menu item

Description

Options

Default

IMAGE DISP.

Choose how long pictures are displayed after

shooting (pg. 73).

CONTINUOUS / 3 SEC / 1.5 SEC /

ZOOM (CONTINUOUS) / OFF

1.5 SEC

FRAME NO. Choose how  les are named (pg. 74). CONTINUOUS / RENEW

CONTINUOUS

DIGITAL ZOOM Enable or disable digital zoom (pg. 75). ON / OFF OFF

LCD POWER SAVE

Enable or disable monitor power saving (pg.

75).

ON / OFF ON

DATE/TIME Set the camera clock (pg. 12). — —

OPERATION VOL. Adjust the volume of camera controls.

q (high) / m (mid) /

n (low) / o (mute)

SHUTTER VOLUME Adjust the volume of the shutter sound.

PLAYBACK VOLUME Adjust the volume for movie playback (pg. 75). — 7

LCD BRIGHTNESS Control the brightness of the monitor (pg. 75). — 0

FORMAT

Format internal memory or memory cards

(pg. 76).

——

Choose a language (pg. 12). See page 93 ENGLISH

AUTO POWER OFF Choose the auto power o delay (pg. 76). 5 MIN / 2 MIN / OFF 2 MIN

TIME DIFFERENCE Set the clock to local time (pg. 77). k/j

VIDEO SYSTEM

Choose a video mode for connection to a TV

(pg. 41).

NTSC / PAL —

RESET

Reset all settings except Frame number,

DATE/TIME, TIME DIFFERENCE, and VIDEO SYSTEM

to default values. A con rmation dialog will

be displayed, press the selector left or right to

highlight OK and press MENU/OK.

——

Menus

The Setup Menu

IMAGE DISP.

Choose an option other than OFF to display pictures in the monitor after shooting. Pictures can

be displayed for 1.5 s (1.5 SEC), 3 s (3 SEC), or until the MENU/OK button is pressed (CONTINUOUS

and ZOOM (CONTINUOUS)). If ZOOM (CONTINUOUS) is selected, photos taken at qualities larger

than p can be zoomed in to check focus and other  ne details (see page 33). If Intelligent Face

Detection is on (pg. 18), the camera will automatically zoom in on the face used to set focus and

exposure; press the selector down to cycle through the other faces detected. Note that ZOOM

(CONTINUOUS) is disabled during continuous shooting (pg. 61), and that the colors displayed at

settings of 1.5 SEC and 3 SEC may di er from those in the  nal picture.

The Setup Menu

FRAME NO.

New pictures are stored in image  les named using a four-digit  le

number assigned by adding one to the last  le number used. The  le

number is displayed during playback as shown at right. FRAME NO.

controls whether  le numbering is reset to 0001 when a new memory

card is inserted or the current memory card or internal memory is

formatted.

• CONTINUOUS: Numbering continues from the last  le number used or the

 rst available  le number, whichever is higher. Choose this option to reduce the number of pictures

with duplicate  le names.

• RENEW: Numbering is reset to 0001 after formatting or when a new memory card is inserted.

A Notes

• If the frame number reaches 999-9999, the shutter release will be disabled (pg. 88).

• Selecting s RESET (pg. 72) does not reset frame numbering.

• Frame numbers for pictures taken with other cameras may di er.

100-0001

Frame

number

File

number

Directory

number

Menus

The Setup Menu

DIGITAL ZOOM

If ON is selected, pressing T at the maximum

optical zoom position will trigger digital zoom,

further magnifying the image. To cancel digital

zoom, zoom out to the minimum digital zoom

position and press W.

Zoom indicator,

DIGITAL ZOOM on

Zoom indicator,

DIGITAL ZOOM o

WWT

Digital

zoom

Optical zoomOptical zoom

AUTO

Zoom

indicator

C Caution

Digital zoom produces lower quality images than

optical zoom.

LCD POWER SAVE

If ON is selected, the monitor will dim to save

power if no operations are performed for

several seconds. Full brightness can be restored

by pressing the shutter button halfway. The

monitor does not dim in movie mode or during

playback.

PLAYBACK VOLUME

Press the selector up or down

to choose volume for movie

playback and press MENU/OK to

select.

SET CANCEL

VOLUME

LCD BRIGHTNESS

Press the selector up or down

to choose monitor brightness

and press MENU/OK to select.

SET

CANCEL

LCD BRIGHTNESS

The Setup Menu

FORMAT

Format internal memory or a

memory card. If a memory

card is inserted in the camera,

x will be displayed in the

dialog shown at right and

this option will format the memory card. If no

memory card is inserted, d will be displayed

and this option will format internal memory.

Press the selector left to highlight OK and press

MENU/OK to begin formatting.

C Cautions

• All data—including protected pictures—will be

deleted. Be sure important  les have been copied to

a computer or other storage device.

• Do not open the battery cover during formatting.

AUTO POWER OFF

Choose the length of time before the camera

turns o automatically when no operations

are performed. Shorter times increase battery

life; if OFF is selected, the camera must be

turned o manually. Note that regardless of the

option selected, the camera will not turn o

automatically when connected to a printer (pg.

42) or computer (pg. 53) or when a slide show is

in progress (pg. 65).

B Tip: Reactivating the Camera

To reactivate the camera after it has turned o

automatically, press the n button or press the

D button for about a second (pg. 11).

FORMAT

SET

FORMAT OK?

ERASE ALL DATA

OK CANCEL

FORMAT

SET

FORMAT OK?

ERASE ALL DATA

OK CANCEL

Menus

The Setup Menu

TIME DIFFERENCE

When travelling, use this option to switch the camera clock instantly from your home time zone to

the local time at your destination.

Specify the di erence between local time

and your home time zone.

1.1 Press the selector up or down

to highlight j LOCAL.

1.2 Press the selector right to

display the time di erence.

12 / 31 / 2050

00 : 00

10: 00 AM

TIME DIFFERENCE

SET CANCEL

1.3 Press the selector left or right

to highlight +, –, hours, or

minutes; press up or down to

edit. The minimum increment

is 15 minutes.

1.4 Press MENU/OK when settings

are complete.

Switch between local time and your

home time zone.

To set the camera clock to local time,

highlight j LOCAL and press MENU/OK.

To set the clock to the time in your home

time zone, select k HOME. If j LOCAL

is selected, j will be displayed in the

monitor for three seconds after the camera

enters shooting mode, and the date will be

displayed in yellow.

12 / 31 / 2050 10 : 00 AM

After changing time zones, check that the

date and time are correct.

Technical Notes

Optional Accessories

The camera supports a wide range of accessories from FUJIFILM and other manufacturers.

■

Printing

PictBridge-compatible printer

(available from third-party

suppliers)

USB

■

Audio/Visual

TV (available from

third-party suppliers)

Audio/visual

output

■

Computer Related

Computer (available from

third-party suppliers)

USB

SD card slot or card reader

SD/SDHC

memory card

Printer (available

from third-party

suppliers)

Technical Notes

Optional Accessories

Accessories from Fuji lm

The following optional accessories were available from FUJIFILM. For the latest information on the

accessories available in your region, check with your local Fuji lm representative or visit http://www.

fujifilm.com/products/digital_cameras/index.html.

• NP-45 rechargeable Li-ion battery (supplied): Additional NP-45 slimline batteries can be

purchased as required.

• AV-C1 A/V cable: Connects the camera and a TV.

Troubleshooting

Power and Battery

Problem

Possible cause

Solution

Page

Power

supply

The camera does

not turn on.

The battery is exhausted.

Charge the battery or insert a fully-charged

spare battery.

4, 6

The battery is not in the correct orientation. Re-insert the battery in the correct orientation. 6

The battery-chamber cover is not latched. Latch the battery-chamber cover. 7

The battery runs

down quickly.

The battery is cold.

Warm the battery by placing it in a pocket

or other warm place and re-insert it in the

camera immediately before taking a picture.

—

There is dirt on the battery terminals. Clean the terminals with a soft, dry cloth. —

The camera is in G mode.

Choose a di erent shooting mode. 29

The battery has been charged many times.

The battery has reached the end of its

charging life. Purchase a new battery.

—

The camera turns

o suddenly.

The battery is exhausted.

Charge the battery or insert a fully-charged

spare battery.

4, 6

Battery

charger

Charging does

not start.

The battery is not correctly inserted. Re-insert the battery in the charger. 6

The battery is not in the correct orientation. Re-insert the battery in the correct orientation. 6

Charging is slow. The temperature is low. Charge the battery at room temperature. 5

The charging

lamp lights, but

the battery does

not charge.

There is dirt on the battery terminals. Clean the terminals with a soft, dry cloth. —

The battery has been charged many times.

The battery has reached the end of its

charging life. Purchase a new battery. If

the battery still fails to charge, contact your

FUJIFILM dealer.

—

Troubleshooting

Menus and Displays

Problem

Possible cause

Solution

Page

Menus and displays are

not in English.

English is not selected for the n w

option in the setup menu.

Select ENGLISH.12

Shooting

Problem

Possible cause

Solution

Page

Taking

pictures

No picture is

taken when the

shutter button is

pressed.

Memory is full. Insert a new memory card or delete pictures. 8, 36

Memory is not formatted.

Format the memory card or internal

memory.

There is dirt on the memory card contacts. Clean the contacts with a soft, dry cloth. 9

The memory card is damaged. Insert a new memory card. 8

The battery is exhausted.

Charge the battery or insert a fully-charged

spare battery.

4, 6

The camera has turned o automatically. Turn the camera on. 11, 76

The monitor

goes dark after

shooting.

The  ash has  red.

The monitor may darken while the  ash

charges. Wait for the  ash to charge.

Focus

The camera does

not focus.

The subject is close to the camera. Select macro mode.

The subject is far away from the camera. Cancel macro mode.

The subject is not suited to autofocus. Use focus lock. 21

Troubleshooting

Problem

Possible cause

Solution

Page

Intelligent

Face

Detection

Face detection

not available.

The camera is in a shooting mode which

makes Intelligent Face Detection unavailable.

Choose a di erent shooting mode. 28

No face is

detected.

The subject’s face is obscured sunglasses, a

hat, long hair, or other objects.

Remove the obstructions.

18The subject’s face occupies only a small area

of the frame.

Change the composition so that the

subject’s face occupies a larger area of the

frame.

The subject’s head is tilted or horizontal. Ask the subject to hold their head straight.

The camera is tilted. Hold the camera straight. 14

The subject’s face is poorly lit. Shoot in bright light. —

Wrong subject

selected.

The selected subject is closer to the center

of the frame than the main subject.

Recompose the picture or turn face

detection o and frame the picture using

focus lock.

Close-ups

Macro mode is

not available.

The camera is in a shooting mode which

makes macro (close-up) mode unavailable.

Choose a di erent shooting mode. 28

Troubleshooting

Problem

Possible cause

Solution

Page

Flash

The  ash does

not  re.

The  ash is charging. Wait for the  ash to charge. 16

The camera is in a shooting mode in which

the  ash does not  re.

Choose a di erent shooting mode. 28

The battery is exhausted.

Charge the battery or insert a fully-charged

spare battery.

4, 6

The camera is in continuous mode.

Select OFF for c CONTINUOUS.

The camera is in silent mode. Turn silent mode o .25

The  ash is o (W). Choose a di erent  ash mode. 24

Some  ash

modes are not

available.

The camera is in a shooting mode which

makes some  ash modes unavailable.

Choose a di erent shooting mode. 28

The camera is in silent mode. Turn silent mode o .25

The  ash does

not fully light the

subject.

The subject is not in range of the  ash. Position the subject in range of the  ash. 93

The  ash window is obstructed. Hold the camera correctly. 14

Problem

images

Pictures are

blurred.

The lens is dirty. Clean the lens. 97

The lens is blocked. Keep objects away from the lens. 14

R is displayed during shooting and the

focus frame is displayed in red.

Check focus before shooting.

15, 21,

0 is displayed during shooting. Use the  ash or a tripod. 24

Pictures are

mottled.

The ambient temperature is high and the

subject is poorly lit.

This is normal and does not indicate a

malfunction. Choose a lower sensitivity.

Troubleshooting

Playback

Problem

Possible cause

Solution

Page

Pictures

Pictures are

grainy.

The pictures were taken with a di erent

make or model of camera.

——

Playback zoom

unavailable.

The pictures were taken at an image size of

p or with a di erent make or model of

camera.

——

Audio

No sound in

movie playback.

Playback volume is too low. Adjust playback volume. 40, 75

The microphone was obstructed. Hold the camera correctly during recording. 38

The speaker is obstructed. Hold the camera correctly during playback. 40

Deletion

Selected pictures

are not deleted.

Some of the pictures selected for deletion

are protected.

Remove protection using the device with

which it was originally applied.

Frame no.

File numbering

is unexpectedly

reset.

The battery-chamber cover was opened

while the camera was on.

Turn the camera o before opening the

battery-chamber cover to replace the

battery or insert a memory card.

11, 74

Connections

Problem

Possible cause

Solution

Page

No picture or

sound.

The camera is not properly connected. Connect the camera correctly. 41

The supplied A/V cable was connected

during movie playback.

Connect the camera once movie playback

has ended.

40, 41

Input on the television is set to “TV”. Set input to “VIDEO”. —

The camera is not set to the correct video

standard.

Match the camera r VIDEO SYSTEM

setting to the TV.

41, 72

The volume on the television is too low. Adjust the volume. —

No color.

The camera is not set to the correct video

standard.

Match the camera r VIDEO SYSTEM

setting to the TV.

41, 72

Troubleshooting

Problem

Possible cause

Solution

Page

Computer

The computer

does not

recognize the

camera.

The camera is not properly connected. Connect the camera correctly. 53

PictBridge

Pictures can not

be printed.

The camera is not properly connected. Connect the camera correctly. 42

The printer is o . Turn the printer on. —

Only one copy is

printed.

The printer is not PictBridge-compatible. — —

The date is not

printed.

Miscellaneous

Problem

Possible cause

Solution

Page

Nothing happens when the

shutter button is pressed.

Temporary camera malfunction. Remove and reinsert the battery. 6

The battery is exhausted.

Charge the battery or insert a fully-

charged spare battery.

4, 6

The camera does not

function as expected.

Temporary camera malfunction.

Remove and reinsert the battery. If the

problem persists, contact your FUJIFILM

dealer.

No sound. The camera is in silent mode. Turn silent mode o .25

Warning Messages and Displays

The following warnings are displayed in the monitor:

Warning

Description

Solution

O (red) Low battery.

Charge the battery or insert a fully-charged spare

battery.

N (blinks red) Battery exhausted.

Slow shutter speed. Picture may be blurred. Use the  ash or mount the camera on a tripod.

(displayed in red with

red focus frame)

The camera can not focus.

• Use focus lock to focus on another subject at the

same distance, then recompose the picture (pg. 21).

• If the subject is poorly lit, try focusing at a distance of

about 2 m (6 ft. 7 in.).

• Use macro mode to focus when taking close-ups.

(blinks red)

The subject is too bright or too dark. The

picture will be over- or under-exposed.

If the subject is dark, use the  ash.

FOCUS ERROR

Camera malfunction.

Turn the camera o and then on again, taking care not

to touch the lens. If the message persists, contact a

FUJIFILM dealer.

ZOOM ERROR

NO CARD

No memory card inserted when COPY is

selected in the playback menu.

Insert a memory card.

CARD NOT INITIALIZED

The memory card or internal memory is not

formatted.

Format the memory card or internal memory (pg. 76).

The memory card contacts require cleaning.

Clean the contacts with a soft, dry cloth. If the

message is repeated, format the memory card (pg. 76).

If the message persists, replace the memory card.

Camera malfunction. Contact a FUJIFILM dealer.

PROTECTED CARD The memory card is locked. Unlock the memory card (pg. 8).

BUSY The memory card is incorrectly formatted. Use the camera to format the memory card (pg. 76).

Troubleshooting

Warning Messages and Displays

Warning

Description

Solution

CARD ERROR

The memory card is not formatted for use in

the camera.

Format the memory card (pg. 76).

The memory card contacts require cleaning

or the memory card is damaged.

Clean the contacts with a soft, dry cloth. If the

message is repeated, format the memory card (pg. 76).

If the message persists, replace the memory card.

Camera malfunction. Contact a FUJIFILM dealer.

x MEMORY FULL

The memory card or internal memory is full;

pictures can not be recorded or copied.

Delete pictures or insert a memory card with more

free space.

d MEMORY FULL

INTERNAL MEMORY IS FULL

INSERT A NEW CARD

WRITE ERROR

Memory card error or connection error.

Re-insert the memory card or turn the camera o

and then on again. If the message persists, contact a

FUJIFILM dealer.

Not enough memory remaining to record

additional pictures.

Delete pictures or insert a memory card with more

free space.

The memory card or internal memory is not

formatted.

Format the memory card or internal memory (pg. 76).

READ ERROR

The  le is corrupt or was not created with the

camera.

The  le can not be played back.

The memory card contacts require cleaning.

Clean the contacts with a soft, dry cloth. If the

message is repeated, format the memory card (pg. 76).

If the message persists, replace the memory card.

Camera malfunction. Contact a FUJIFILM dealer.

Warning Messages and Displays

Warning

Description

Solution

FRAME NO. FULL

The camera has run out of frame numbers

(current frame number is 999-9999).

Format the memory card and select RENEW for the

b FRAME NO. option in the j SETUP menu. Take

a picture to reset frame numbering to 100-0001,

then return to the b FRAME NO. menu and select

CONTINUOUS.

TOO MANY FRAMES

Date for which more than 4,999 pictures exist

selected in sort-by-date view.

Choose a di erent date.

CAN NOT EXECUTE

Red-eye reduction can not be applied to the

selected picture or movie.

—

A CAN NOT EXECUTE

PROTECTED FRAME

An attempt was made to delete or rotate a

protected picture.

Remove protection before deleting or rotating

pictures.

x NO IMAGE

The source device selected in the playback

COPY menu contains no pictures.

Select a di erent source.

d NO IMAGE

p CAN NOT TRIM An attempt was made to crop a p picture.

These pictures can not be cropped.

CAN NOT TRIM

The picture selected for cropping is damaged

or was not created with the camera.

DPOF FILE ERROR

The DPOF print order on the current memory

card contains more than 999 images.

Copy the pictures to internal memory and create a

new print order.

CAN NOT SET DPOF The picture can not be printed using DPOF. —

A CAN NOT SET DPOF Movies can not be printed using DPOF. —

CAN NOT ROTATE The picture can not be rotated. —

A CAN NOT ROTATE Movies can not be rotated. —

PRESS AND HOLD THE DISP

BUTTON TO DEACTIVATE

SILENT MODE

An attempt was made to choose a  ash

mode or adjust the volume with the camera

in silent mode.

Exit silent mode before choosing a  ash mode or

adjusting the volume.

COMMUNICATION ERROR

A connection error occurred while pictures

were being printed or copied to a computer

or other device.

Con rm that the device is turned on and that the USB

cable is connected.

Troubleshooting

Warning Messages and Displays

Warning

Description

Solution

PRINTER ERROR

Printer out of paper or ink, or other printer

error.

Check printer (see printer manual for details). To

resume printing, turn the printer o and then turn it

back on.

PRINTER ERROR

RESUME?

Check printer (see printer manual for details). If printing

does not resume automatically, press MENU/OK to resume.

CAN NOT BE PRINTED

An attempt was made to print a movie, a

picture not created with the camera, or a

picture in a format not supported by the

printer.

Movies and some pictures created with other devices

can not be printed. If the picture was created with the

camera, check the printer manual to con rm that the

printer supports the JFIF-JPEG or Exif-JPEG format. If it

does not, the pictures can not be printed.

Appendix

Glossary

Digital zoom: Unlike optical zoom, digital zoom does not increase the amount of visible detail. Instead, details

visible using optical zoom are simply enlarged, producing a slightly “grainy” image.

DPOF (Digital Print Order Format): A standard that allows pictures to be printed from “print orders”

stored in internal memory or on a memory card. The information in the order includes the pictures to

be printed and the number of copies of each picture.

EV (Exposure Value): The exposure value is determined by the sensitivity of the image sensor and the amount

of light that enters the camera while the image sensor is exposed. Each time the amount of light doubles, EV

increases by one; each time the amount of light is halved, EV decreases by one. The amount of light entering

the camera can be controlled by adjusting aperture and shutter speed.

Exif Print: A standard that allows information stored with pictures to be used for optimal color reproduction

during printing.

JPEG (Joint Photographic Experts Group): A compressed  le format for color images. The higher the compression

rate, the greater the loss of information and more noticeable drop in quality when the picture is displayed.

Motion JPEG: An AVI (Audio Video Interleave) format that stores images and sound in a single  le, with the images

recorded in JPEG format. Motion JPEG  les can be played in QuickTime 3.0 or later.

Smear: A phenomenon speci c to CCDs which causes white streaks to appear when very bright light sources,

such as the sun or re ected sunlight, appear in the frame.

WAV (Waveform Audio Format): A standard Windows audio  le format. WAV  les have the extension “*.WAV” and

may be compressed or uncompressed. The camera uses uncompressed WAV. WAV  les can be played using

Windows Media Player or QuickTime 3.0 or later.

White balance: The human brain automatically adapts to changes in the color of light, with the result that objects

that appear white under one light source still appear white when the color of the light source changes. Digital

cameras can mimic this adjustment by processing images according to the color of the light source. This

process is known as “white balance.”

Appendix

Internal Memory/Memory Card Capacity

The following table shows the recording time or number of pictures available at di erent image

qualities. All  gures are approximate;  le size varies with the scene recorded, producing wide

variations in the number of  les that can be stored. The number of exposures or length remaining

may not diminish at an even rate.

3:2

Image size (pixels)

Image size (pixels) 3648 × 2736 3648 × 2432 2592 × 1944 2048 × 1536 1600 × 1200 640 × 480 640 × 480 320 × 240

File size

File size 4.9 MB 2.5 MB 2.2 MB 1.2 MB 780 KB 630 KB 130 KB — —

Internal memory

(approx. 20 MB)

3 7 8 13 19 26 90 13 s 31 s

SD card

512 MB

512 MB 95 190 210 350 480 640 2220 6 min. 12 min.

1 GB

1 GB 190 380 420 700 960 1280 4420 12 min. 28 min.

2 GB

2 GB 390 760 860 1400 1930 2580 8850 25 min. 57 min.

SDHC card

4 GB

4 GB 790 1520 1720 2810 3870 5160 17720 50 min.

116 min.

8 GB

8 GB 1590 3060 3450 5650 7780 10370 35560 100 min.

229 min.

16 GB

16 GB 3190 6140 6930 11340 15600 20800 71310 204 min.

467 min.

32 GB

32 GB 6340 12190 13760 22610 30970 41290 99990 406 min.

927 min.

* Total length of all movie  les. Individual movies can not exceed 2 GB in size.

System

Model FinePix J25/FinePix J20 digital camera

E ective pixels 10 million

CCD ½

.3 -in., square-pixel CCD with primary color  lter

Storage media • Internal memory (approx. 20 MB) • SD/SDHC memory cards (see page 8)

File system Compliant with Design Rule for Camera File System (DCF), Exif 2.2, and Digital Print Order Format

(DPOF)

File format • Still pictures: Exif 2.2 JPEG (compressed) • Movies: Motion JPEG AVI

Image size (pixels) • rF: 3,648 × 2,736 • rN: 3,648 × 2,736

• g

3:2

: 3,648 × 2,432

• o : 2,592 × 1,944

• n : 2,048 × 1,536 • m : 1,600 × 1,200 • p : 640 × 480

File size See page 91

Lens Fujinon 3 × optical zoom lens, F/3.1 (wide angle) – 5.6 (telephoto)

Focal length

f=6.3 mm–18.9 mm (35-mm format equivalent: 35.5 mm–106.5 mm)

Digital zoom Approx. 5.7 × (up to 17.1 × when combined with optical zoom)

Aperture Two steps

Focus range (distance from

front of lens)

Approx. 40 cm (1.3 ft.) - in nity (wide angle); 40 cm (1.3 ft.) - in nity (telephoto)

Macro mode: approx. 10 cm-80 cm/3.9 in.-2.6 ft. (wide angle); 40 cm-80 cm/1.3 ft.-2.6ft. (telephoto)

Sensitivity Equivalent to ISO 100, 200, 400, 800, 1600; AUTO (Standard Output Sensitivity)

Metering 256-segment through-the-lens (TTL) metering

Exposure control Programmed autoexposure

Exposure compensation

–2 EV – +2 EV in increments of

3 EV (M mode)

Scene modes

p(BABY MODE), C(ANTI-BLUR), U(PORTRAIT), K(LANDSCAPE), L(SPORT), D(NIGHT),

U(NIGHT(TRIPOD)), B(NATURAL LIGHT), G(BEACH), F(SNOW), W(FIREWORKS), E(SUNSET),

O(FLOWER), I(PARTY), H(MUSEUM), P(TEXT)

Image Stabilization Available

Intelligent Face Detection Available

Speci cations

Appendix

Speci cations

System

Shutter speed ¼ s–

2,000 s (AUTO mode); 8 s–

2,000 s (other modes); combined mechanical and electronic shutter

Continuous Up to three frames at a maximum of approximately 1 fps

Focus • Mode: Single AF • Autofocus system: Contrast-detect TTL AF

• Focus-area selection: AF CENTER

White balance Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight

 uorescent, warm white  uorescent, cool white  uorescent, and incandescent lighting

Self-timer Approx. 2 s and approx. 10 s

Flash Flash type: Auto  ash

E ective range: (g: AUTO)

Wide-angle: approx. 50 cm - 3.2 m (1.6 ft. - 10.5 ft.)

Telephoto: approx. 50 cm - 1.8 m (1.6 ft. - 5.9 ft.)

Macro: approx. 30 cm - 80 cm (11.8 in. - 2.6 ft.)

Flash modes Auto,  ll  ash, o , slow sync (red-eye removal o ); auto with red-eye reduction,  ll  ash with red-

eye reduction, o , slow sync with red-eye reduction (red-eye removal on)

Monitor (FinePix J20) 2.7-in., 230k-dot amorphous silicon TFT color LCD monitor; frame coverage approx. 96%

Monitor (FinePix J25) 3.0-in., 230k-dot amorphous silicon TFT color LCD monitor; frame coverage approx. 96%

Movies Camera can record movies with monaural sound and a frame size of 640 × 480 (t) or 320 × 240

(s) at a frame rate of 30 fps

Shooting options Scene recognition, Intelligent Face Detection with red-eye removal, best framing, and frame

number memory

Playback options Intelligent Face Detection with red-eye removal, micro thumbnail, multi-frame playback, sort-by-

date, cropping (still pictures only), slide show, and image rotation

Other options PictBridge, Exif Print, language selection (Simplified Chinese, Traditional Chinese, Czech, Dutch,

English, French, German, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish,

Swedish, and Turkish), time difference

Speci cations

Input/output terminals

A/V OUT (audio/video output) NTSC or PAL with monaural sound

Digital input/output USB 2.0 High Speed with MTP/PTP connection

Power supply/other

Power sources NP-45 rechargeable battery

Battery life (NP-45) Approx. 165 frames, based on CIPA (Camera and Imaging Products Association) standard; measured at 23 °C

(73 °F) with the monitor on, pictures recorded to an SD memory card, the camera zoomed from

widest angle to maximum zoom and back once every 30 s, the  ash  red at full power with every

other shot, and the camera turned o and then on again every 10 shots. Note that the number

of shots that can be taken with a fully-charged battery varies with temperature and shooting

conditions.

Camera dimensions 91.0 mm × 56.0 mm × 17.4 mm/3.6 in. × 2.2 in. × 0.7 in. (W × H × D), excluding projections

Camera weight

(FinePix J20)

Approx. 96.5 g/3.4 oz., excluding battery, accessories, and memory cards

Camera weight

(FinePix J25)

Approx. 100.0 g/3.5 oz., excluding battery, accessories, and memory cards

Shooting weight

(FinePix J20)

Approx. 113.1 g/4.0 oz., including battery and memory card

Shooting weight

(FinePix J25)

Approx. 116.6 g/4.1 oz., including battery and memory card

Operating conditions • Temperature: 0 °C – +40 °C/+32 °F – +104 °F • Humidity: 85% or less (no condensation)

Appendix

Speci cations

NP-45 rechargeable battery

Nominal voltage DC 3.7 V

Nominal capacity 740 mAh

Operating temperature 0 °C – +40 °C/+32 °F – +104 °F

Dimensions (W × H × D) 31 mm × 39.4 mm × 5.7 mm/1.2 in. × 1.6 in. × 0.2 in.

Weight Approx. 15 g/0.5 oz.

BC-45A battery charger

Rated input 100–240 V AC, 50/60 Hz

Input capacity 7.0 VA (100 V)/10.8 VA (240 V )

Rated output 4.2 V DC, 550 mA

Supported batteries NP-45 rechargeable batteries

Charging time Approx. 100 minutes (at +23 °C/+73 °F)

Dimensions (W × H × D)

(built-in plug model)

101.7 mm × 56 mm × 20 mm/4.0 in. × 2.2 in. × 0.8 in.

Dimensions (W × H × D)

(power cable model)

85 mm × 54 mm × 20 mm/3.3 in. × 2.1 in. × 0.8 in.

Weight (built-in plug model) Approx. 66 g/2.3 oz., excluding battery

Weight (power cable model) Approx. 56 g/2.0 oz., excluding battery

Operating temperature 0 °C – +40 °C/+32 °F – +104 °F

Speci cations

Notes on the Battery and Battery Charger

• The battery and charger may become warm to the touch during charging. This is normal and does not

indicate a malfunction. If possible, charge the battery in a well-ventilated location.

• The battery charger may vibrate when in use. This is normal and does not indicate a malfunction.

• The charger is for use with NP-45 batteries only.

• If the charger causes radio interference, increase the distance between the charger and the radio receiver.

• Do not leave the charger in locations that are very dusty or exposed to strong vibration, extreme humidity, or

high temperatures (for example, in direct sunlight or next to a heater).

• The battery charger can be used with input voltages of 100–240 V AC and 50 or 60 Hz. The shape of the

plug varies with the country of sale; consult your travel agent to determine whether the charger can be used

abroad.

Color Television Systems

NTSC (National Television System Committee) is a color television telecasting speci cation adopted mainly in

the U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly in

European countries and China.

Notices

• Speci cations subject to change without notice. FUJIFILM shall not be held liable for damages resulting from

errors in this manual.

• Although the monitor is manufactured using advanced high-precision technology, small bright points and

anomalous colors (particularly in the vicinity of text) may appear. This is normal for this type of monitor and

does not indicate a malfunction; images recorded with the camera are una ected.

• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric  elds, static

electricity, or line noise).

• Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.

Appendix

Caring for the Camera

To ensure continued enjoyment of the product, observe the following precautions.

Storage and Use

If the camera will not be used for an extended

period, remove the battery and memory card.

Do not store or use the camera in locations that

are:

• exposed to rain, steam, or smoke

• very humid or extremely dusty

• exposed to direct sunlight or very high

temperatures, such as in a closed vehicle on a

sunny day

• extremely cold

• subject to strong vibration

• exposed to strong magnetic  elds, such as

near a broadcasting antenna, power line, radar

emitter, motor, transformer, or magnet

• in contact with volatile chemicals such as

pesticides

• next to rubber or vinyl products

■

Water and Sand

Exposure to water and sand can also damage the

camera and its internal circuitry and mechanisms.

When using the camera at the beach or seaside,

avoid exposing the camera to water or sand. Do

not place the camera on a wet surface.

■

Condensation

Sudden increases in temperature, such as occur

when entering a heated building on a cold day,

can cause condensation inside the camera. If

this occurs, turn the camera off and wait an hour

before turning it on again. If condensation forms

on the memory card, remove the card and wait

for the condensation to dissipate.

Cleaning

Use a blower to remove dust from the lens and

monitor, then gently wipe with a soft, dry cloth.

Any remaining stains can be removed by wiping

gently with a piece of FUJIFILM lens-cleaning

paper to which a small amount of lens-cleaning

 uid has been applied. Care should be taken to

avoid scratching the lens or monitor. The camera

body can be cleaned with a soft, dry cloth.

Do not use alcohol, thinner, or other volatile

chemicals.

Travelling

Keep the camera in your carry-on baggage.

Checked baggage may su er violent shocks that

could damage the camera.

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN

http://www.fujifilm.com/products/digital_cameras/index.html

Fujifilm finepix j25 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Fujifilm finepix j25

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info