510426
1
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
DIGITAL CAMERA
FINEPIX X100
Owner’s Manual
Thank you for your purchase of this product. This
manual describes how to use your FUJIFILM FinePix
X100 digital camera and install the supplied software.
Be sure that you have read and understood its con-
tents before using the camera.
For information on related products, visit our website at
http://www.fujifilm.com/products/digital_cameras/index.html
For more information on the X100, visit
http://www.finepix-x100.com/
Before You Begin
First Steps
Taking Photographs
More on Photography
Viewing Pictures
Menus
Connections
Technical Notes
Troubleshooting
Appendix
EN
BL01285-202
ii
For Your Safety
For Your Safety
Read Instructions: All the safety and operating instructions
should be read before the appliance is operated.
Retain Instructions: The safety and operating instructions
should be retained for future reference.
Heed Warnings: All warnings on the appliance and in the
operating instructions should be adhered to.
Follow Instructions: All operating and use instructions
should be followed.
Installation
Installation
Power Sources: This video product should be operated only
from the type of power source indicated on the marking la-
bel. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power com-
pany. For video products intended to operate from battery
power, or other sources, refer to the operating instructions.
Grounding or Polarization: This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fi t into the
power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fi t, contact your electri-
cian to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
Alternate Warnings: This video product is equipped with
a three-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only fi t into a grounding-type
power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician to re-
place your obsolete outlet. Do not defeat the safety purpose
of the grounding type plug.
Overloading: Do not overload wall outlets and extension
cords as this can result in a risk of fi re or electric shock.
Ventilation: Slots and openings in the cabinet are provided
for ventilation, to ensure reliable operation of the video
product and to protect it from overheating, and these open-
ings must not be blocked or covered. The openings should
never be blocked by placing the video product on a bed,
sofa, rug, or other similar surface.
This video product should not be placed in a built-in instal-
lation such as a bookcase or rack unless proper ventilation
is provided or the manufacturer’s instructions have been
adhered to. This video product should never be placed near
or over a radiator or heat register.
Attachments: Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video product near wa-
ter—for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool,
and the like.
Power-Cord Protection: Power-supply cords should be routed
so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular at-
tention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
Accessories: Do not place this video product on an unstable
cart, stand, tripod, bracket, or table. The video product may
fall, causing serious injury to a child or adult, and serious
damage to the appliance. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold
with the video product. Any mounting of the appliance
should follow the manufacturer’s instructions, and should use
a mounting accessory recommended by the manufacturer.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
Antennas
Antennas
Outdoor Antenna Grounding: If an outside antenna or cable
system is connected to the video product, be sure the anten-
na or cable system is grounded so as to provide some protec-
tion against voltage surges and built-up static charges. Sec-
tion 810 of the National Electrical Code, ANSI/NFPA No. 70,
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
Antenna Lead
in Wire
Ground Clamp
Electric Service
Equipment
Ground
Clamps
Grounding Conductors
(NEC SECTION 810-21)
Power Service Grounding Electrode
System (NEC ART 250. PART H)
Antenna
Discharge Unit
(NEC SECTION
810-20)
Power Lines: An outside antenna system should not be lo-
cated in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Use
Use
Cleaning: Unplug this video product from the wall outlet be-
fore cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Object and Liquid Entry: Never push objects of any kind into
this video product through openings as they may touch
dangerous voltage points or short out parts that could result
in a fi re or electric shock. Never spill liquid of any kind on
the video product.
Lightning: For added protection for this video product re-
ceiver during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the video product due to lightning and
power-line surges.
IMPORTANT SAFETY INSTRUCTIONS
iii
For Your Safety
Service
Service
Servicing: Do not attempt to service this video product
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualifi ed service personnel.
Damage Requiring Service: Unplug this video product from
the wall outlet and refer servicing to qualifi ed service per-
sonnel under the following conditions:
When the power-supply cord or plug is damaged
• If liquid has been spilled, or objects have fallen into the
video product.
If the video product has been exposed to rain or water.
If the video product has been dropped or the cabinet has
been damaged.
If the video product does not operate normally follow the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper adjust-
ment of other controls may result in damage and will often
require extensive work by a qualifi ed technician to restore
the video product to its normal operation.
When the video product exhibits a distinct change in perfor-
mance this indicates a need for service.
Replacement Parts: When replacement parts are required,
be sure the service technician has used replacement parts
specifi ed by the manufacturer or have the same character-
istics as the original part. Unauthorized substitutions may
result in fi re, electric shock or other hazards.
Safety Check: Upon completion of any service or repairs to
this video product, ask the service technician to perform
safety checks to determine that the video product is in
proper operating condition.
Be sure to read these notes before use
Safety Notes
Make sure that you use your camera correctly. Read these
safety notes and your Owners Manual carefully before use.
• After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indi-
cate the severity of the injury or damage that can result if the
information indicated by the icon is ignored and the product
is used incorrectly as a result.
WARNING
This icon indicates that death or serious injury
can result if the information is ignored.
CAUTION
This icon indicates that personal injury or
material damage can result if the information
is ignored.
The icons shown below are used to indicate the nature of the
instructions which are to be observed.
Triangular icons tell you that this information requires
attention (“Important”).
Circular icons with a diagonal bar tell you that the action
indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an ac-
tion that must be performed (“Required”).
WARNING
WARNING
Unplug
from power
socket
If a problem arises, turn the camera o , remove the bat-
tery, and disconnect and unplug the AC power adapter.
Continued use of the camera when it is emitting
smoke, is emitting any unusual odor, or is in any other
abnormal state can cause a fi re or electric shock. Con-
tact your FUJIFILM dealer.
Do not allow water or foreign objects to enter the camera.
If water or foreign objects get inside the camera, turn
the camera off , remove the battery, and disconnect
and unplug the AC power adapter. Continued use of
the camera can cause a fi re or electric shock. Contact
your FUJIFILM dealer.
WARNING
WARNING
Do not use in
the bathroom
or shower
Do not use the camera in the bathroom or shower. This can
cause a fi re or electric shock.
Do not disas-
semble
Never attempt to change or take apart the camera (never
open the case) Failure to observe this precaution can
cause fi re or electric shock.
Do not touch
internal
parts
Should the case break open as the result of a fall or other
accident, do not touch the exposed parts. Failure to observe
this precaution could result in electric shock or in injury
from touching the damaged parts. Remove the bat-
tery immediately, taking care to avoid injury or electric
shock, and take the product to the point of purchase
for consultation.
Do not change, heat or unduly twist or pull the connection
cord and do not place heavy objects on the connection cord.
These actions could damage the cord and cause a fi re
or electric shock. If the cord is damaged, contact your
FUJIFILM dealer.
Do not place the camera on an unstable surface. This can
cause the camera to fall or tip over and cause injury.
Never attempt to take pictures while in motion. Do not
use the camera while walking or driving. This can
result in you falling down or being involved in a traf-
c accident.
Do not touch any metal parts of the camera during a thun-
derstorm. This can cause an electric shock due to in-
duced current from the lightning discharge.
Do not use the battery except as speci ed. Load the bat-
tery as shown by the indicator.
Do not heat, change or take apart the battery. Do not drop
or subject the battery to impacts. Do not store the battery
with metallic products. Any of these actions can cause
the battery to burst or leak and cause fi re or injury as
a result.
Use only batteries or AC power adapters speci ed for use
with this camera. Do not use voltages other than the power
supply voltage shown. The use of other power sources
can cause a fi re.
iv
For Your Safety
WARNING
WARNING
If the battery leaks and  uid gets in contact with your eyes,
skin or clothing,  ush the a ected area with clean water
and seek medical attention or call an emergency number
right away.
Do not use the charger to charge batteries other than those
speci ed here. The supplied charger is for use only with
batteries of the type supplied with the camera. Using
the charger to charge conventional batteries or other
types of rechargeable batteries can cause the battery to
leak, overheat or burst.
When carrying the battery, install it in a digital camera or
keep it in the hard case. When storing the battery, keep it
in the hard case. When discarding, cover the battery termi-
nals with insulation tape. Contact with other metallic
objects or batteries could cause the battery to ignite
or burst.
Keep memory cards out of the reach of small children. Be-
cause memory cards are small, they can be swallowed
by children. Be sure to store memory cards out of the
reach of small children. If a child swallows a memory
card, seek medical attention or call an emergency
number.
CAUTION
CAUTION
Do not use this camera in locations a ected by oil fumes,
steam, humidity or dust. This can cause a fi re or elec-
tric shock.
Do not leave this camera in places subject to extremely high
temperatures. Do not leave the camera in locations
such as a sealed vehicle or in direct sunlight. This can
cause a fi re.
Keep out of the reach of small children. This product
could cause injury in the hands of a child.
Do not place heavy objects on the camera. This can cause
the heavy object to tip over or fall and cause injury.
Do not move the camera while the AC power adapter is still
connected. Do not pull on the connection cord to disconnect
the AC power adapter. This can damage the power cord
or cables and cause a fi re or electric shock.
Do not cover or wrap the camera or the AC power adapter in
a cloth or blanket. This can cause heat to build up and
distort the casing or cause a fi re.
CAUTION
CAUTION
When you are cleaning the camera or you do not plan to use
the camera for an extended period, remove the battery and
disconnect and unplug the AC power adapter. Failure to do
so can cause a fi re or electric shock.
When charging ends, unplug the charger from the power
socket. Leaving the charger plugged into the power
socket can cause a fi re.
Using a  ash too close to a person’s eyes may temporarily
a ect the eyesight. Take particular care when photo-
graphing infants and young children.
When a memory card is removed, the card could come out
of the slot too quickly. Use your  nger to hold it and gently
release the card. Injury could result to those struck by
the ejected card.
Request regular internal testing and cleaning for your
camera. Build-up of dust in your camera can cause a
re or electric shock. Contact your FUJIFILM dealer to
request internal cleaning every two years. Please note
that this service is not free of charge.
Danger of explosion if battery is incorrectly replaced. Re-
place only with the same or equivalent type.
The Battery and Power Supply
Note: Check the type of battery used in your camera and
read the appropriate sections.
The following describes the proper use of batteries and how
to prolong their life. Incorrect use can shorten battery life or
cause leakage, overheating, fi re, or explosion.
Li-ion Batteries
Li-ion Batteries
Read this section if your camera uses a rechargeable
Li-ion battery.
The battery is not charged at shipment. Charge the battery
before use. Keep the battery in its case when not in use.
Notes on the Battery
The battery gradually loses its charge when not in use.
Charge the battery one or two days before use.
Battery life can be extended by turning the camera off when
not in use.
Battery capacity decreases at low temperatures; a depleted
battery may not function at when cold. Keep a fully charged
spare battery in a warm place and exchange as necessary,
or keep the battery in your pocket or other warm place and
insert it in the camera only when shooting. Do not place
the battery in direct contact with hand warmers or other
heating devices.
Charging the Battery
Charge the battery in the supplied battery charger. Charging
times will increase at ambient temperatures below +10 °C
(+50 °F) or above +35 °C (+95 °F). Do not attempt to charge
the battery at temperatures above 40 °C (+104 °F); at tem-
peratures below 0 °C (+32 °F), the battery will not charge.
Do not attempt to recharge a fully charged battery. The bat-
tery does not however need to be fully discharged before
charging.
The battery may be warm to the touch immediately after
charging or use. This is normal.
Battery Life
At normal temperatures, the battery can be recharged about
300 times. A noticeable decrease in the length of time the
battery will hold a charge indicates that it has reached the
v
For Your Safety
end of its service life and should be replaced.
Storage
Performance may be impaired if the battery is left unused
for extended periods when fully charged. Run the battery
at before storing it.
If the camera will not be used for an extended period, re-
move the battery and store it in a dry place with an ambient
temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do
not store in locations exposed to extremes of temperature.
Cautions: Handling the Battery
Do not transport or store with metal objects such as neck-
laces or hairpins.
Do not expose to fl ame or heat.
Do not disassemble or modify.
Use with designated chargers only.
Dispose of used batteries promptly.
Do not drop or subject to strong physical shocks.
Do not expose to water.
Keep the terminals clean.
The battery and camera body may become warm to the
touch after extended use. This is normal.
AA Alkaline/Rechargeable Ni-MH Batteries
AA Alkaline/Rechargeable Ni-MH Batteries
Read this section if your camera uses AA alkaline or re-
chargeable AA Ni-MH batteries. Information on compat-
ible battery types may be found elsewhere in the camera
manual.
Cautions: Handling the Batteries
Do not expose to water, fl ame, or heat, or store in warm or
humid conditions.
Do not transport or store with metal objects such as neck-
laces or hairpins.
Do not disassemble or modify the batteries or battery
casing.
Do not subject to strong physical shocks.
Do not use batteries that are leaking, deformed, or discol-
ored.
Keep out of reach of infants and small children.
Insert in the correct orientation.
Do not mix old and new batteries, batteries with diff erent
charge levels, or batteries of diff erent types.
If the camera will not be used for an extended period, re-
move the batteries. Note that the camera clock will be reset.
• The batteries may be warm to the touch immediately after
use. Turn the camera off and allow the batteries to cool
before handling.
• Battery capacity tends to decrease at low temperatures.
Keep spare batteries in a pocket or other warm place and
exchange as necessary. Cold batteries may recover some
of their charge when warmed.
Fingerprints and other stains on the battery terminals
can impair battery performance. Thoroughly clean the
terminals with a soft, dry cloth before inserting them in
the camera.
If the batteries leak, clean the battery compartment
thoroughly before inserting new batteries.
If fl uid from the battery comes into contact with
skin or clothing, fl ush the aff ected area with water.
If  uid enters your eyes, immediately  ush the a ected
area with water and seek medical attention. Do not rub
your eyes. Failure to observe this precaution could result
in permanent visual impairment.
Ni-MH Batteries
The capacity of Ni-MH batteries may be temporarily reduced
when new, after long periods of disuse, or if they are repeat-
edly recharged before being fully discharged. This is nor-
mal and does not indicate a malfunction. Capacity can be
increased by repeatedly discharging the batteries using the
discharge option in the camera setup menu and recharging
them using a battery charger.
Q CAUTION: Do not use the discharge option with alkaline
batteries.
The camera draws a small amount of current even when off .
Ni-MH batteries that have been left in the camera for an ex-
tended period may be drawn down to the point that they no
longer hold a charge. Battery performance may also drop if
the batteries are run down in a device such as a fl ashlight. Use
the discharge option in the camera setup menu to discharge
Ni-MH batteries. Batteries that no longer hold a charge
even after repeatedly being discharged and recharged have
reached the end of their service life and must be replaced.
Ni-MH batteries can be recharged in a battery charger (sold sep-
arately). Batteries may become warm to the touch after charg-
ing. Refer to the instructions provided with the charger for more
information. Use the charger with compatible batteries only.
Ni-MH batteries gradually lose their charge when not in use.
Disposal
Dispose of used batteries in accord with local regulations.
AC Power Adapters (Available Separately)
AC Power Adapters (Available Separately)
This section applies to all camera models. Use only
FUJIFILM AC power adapters designated for use with this
camera. Other adapters could damage the camera.
The AC power adapter is for indoor use only.
Be sure the DC plug is securely connected to the camera.
• Turn the camera off before disconnecting the adapter. Dis-
connect the adapter by the plug, not the cable.
Do not use with other devices.
Do not disassemble.
Do not expose to high heat and humidity.
Do not subject to strong physical shocks.
The adapter may hum or become hot to the touch during
use. This is normal.
• If the adapter causes radio interference, reorient or relocate
the receiving antenna.
vi
For Your Safety
Using the Camera
Do not aim the camera at extremely bright light sources,
such as the sun in a cloudless sky. Failure to observe this
precaution could damage the camera image sensor.
Take Test Shots
Take Test Shots
Before taking photographs on important occasions (such as
at weddings or before taking the camera on a trip), take a
test shot and view the results to ensure that the camera is
functioning normally. FUJIFILM Corporation can not accept
liability for damages or lost profi ts incurred as a result of
product malfunction.
Notes on Copyright
Notes on Copyright
Unless intended solely for personal use, images recorded us-
ing your digital camera system cannot be used in ways that
infringe copyright laws without the consent of the owner.
Note that some restrictions apply to the photographing of
stage performances, entertainments, and exhibits, even
when intended purely for personal use. Users are also asked
to note that the transfer of memory cards containing images
or data protected under copyright laws is only permissible
within the restrictions imposed by those copyright laws.
Handling
Handling
To ensure that images are recorded correctly, do not subject
the camera to impact or physical shocks while images are
being recorded.
Liquid Crystal
Liquid Crystal
In the event that the display is damaged, care should be
taken to avoid contact with liquid crystal. Take the urgent
action indicated should any of the following situations arise:
If liquid crystal comes in contact with your skin, clean the
area with a cloth and then wash thoroughly with soap and
running water.
If liquid crystal enters your eyes, fl ush the aff ected eye with
clean water for at least 15 minutes and then seek medical
assistance.
If liquid crystal is swallowed, rinse your mouth thoroughly
with water. Drink large quantities of water and induce
vomiting, then seek medical assistance.
Although the display is manufactured using extremely high-
precision technology, it may contain pixels that are always lit
or that do not light. This is not a malfunction, and images
recorded with the product are unaff ected.
Trademark Information
Trademark Information
xD-Picture Card and E are trademarks of FUJIFILM
Corporation. The typefaces included herein are solely de-
veloped by DynaComware Taiwan Inc. Macintosh, Quick-
Time, and Mac OS are trademarks of Apple Inc. in the U.S.A.
and other countries. Windows 7, Windows Vista, and the
Windows logo are trademarks of the Microsoft group of
companies. Adobe and Adobe Reader are either trademarks
or registered trademarks of Adobe Systems Incorporated in
the U.S.A. and/or other countries. The SDHC and SDXC logos
are trademarks of SD-3C, LLC. The HDMI logo is a trademark.
YouTube is a trademark of Google Inc. All other trade names
mentioned in this manual are the trademarks or registered
trademarks of their respective owners.
Electrical Interference
Electrical Interference
This camera may interfere with hospital or aviation equip-
ment. Consult with hospital or airline staff before using the
camera in a hospital or on an aircraft.
Color Television Systems
Color Television Systems
NTSC (National Television System Committee) is a color televi-
sion telecasting specifi cation adopted mainly in the U.S.A., Can-
ada, and Japan. PAL (Phase Alternation by Line) is a color televi-
sion system adopted mainly in European countries and China.
Electrical Interference
Electrical Interference
Exif Print is a newly revised digital camera fi le format in
which information stored with photographs is used for opti-
mal color reproduction during printing.
IMPORTANT NOTICE: Read Before Using the Software
Direct or indirect export, in whole or in part, of licensed soft-
ware without the permission of the applicable governing
bodies is prohibited.
vii
For Your Safety
NOTICES
To prevent  re or shock hazard, do not expose the unit
to rain or moisture.
Please read the “Safety Notes” and make sure you un-
derstand them before using the camera.
Perchlorate Material—special handling may apply. See
http://www.dtsc.ca.gov/hazardouswaste/perchlorate.
For Customers in the U. S. A.
For Customers in the U. S. A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement: This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
CAUTION: This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular in-
stallation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the fol-
lowing measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit diff erent
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
You are cautioned that any changes or modifi cations not
expressly approved in this manual could void the users
authority to operate the equipment.
Notes on the Grant: To comply with Part 15 of the FCC Rules,
this product must be used with a Fujifi lm-specifi ed ferrite-
core A/V cable, USB cable, and DC supply cord.
For Customers in Canada
For Customers in Canada
CAUTION: This Class B digital apparatus complies with Cana-
dian ICES-003.
Disposal of Electrical and Electronic Equipment in Private
Disposal of Electrical and Electronic Equipment in Private
Households
Households
In the European Union, Norway, Iceland and Liechten-
stein: This symbol on the product, or in the man-
ual and in the warranty, and/or on its packaging
indicates that this product shall not be treated as
household waste. Instead it should be taken to
an applicable collection point for the recycling
of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences to the en-
vironment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
This symbol on the batteries or accumulators in-
dicates that those batteries shall not be treated
as household waste.
If your equipment contains easy removable batteries or
accumulators please dispose these separately according to
your local requirements.
The recycling of materials will help to conserve natural re-
sources. For more detailed information about recycling this
product, please contact your local city offi ce, your household
waste disposal service or the shop where you purchased the
product.
In Countries Outside the European Union, Norway, Iceland and
Liechtenstein: If you wish to discard this product, including
the batteries or accumulators, please contact your local au-
thorities and ask for the correct way of disposal.
EC Declaration of Conformity
EC Declaration of Conformity
We
Name: FUJIFILM Electronic Imaging Europe GmbH
Address: Benzstrasse 2 47533 Kleve, Germany
declare that the product
Product Name: FUJIFILM DIGITAL CAMERA FinePix X100
Manufacturers
Name: FUJIFILM Corporation
Manufacturers
Address:
7-3, AKASAKA 9-CHOME, MINATO-KU,
TOKYO, 107-0052 JAPAN
conforms to the following Standards:
Safety: EN60065: 2002 + A1: 2006 + A11: 2008
EMC: EN55022: 2006 + A1: 2007 Class B
EN55024: 1998 + A1: 2001 + A2: 2003
EN61000-3-2: 2006
EN61000-3-3: 1995 + A1: 2001 + A2: 2005
following the provision of the EMC Directive (2004/108/EC)
and Low Voltage Directive (2006/95/EC).
February 1, 2011Kleve, Germany
Place Date Signature, Managing
Director
viii
About This Manual
About This Manual
Before using the camera, read this manual and the warnings in “For Your Safety (P ii). For information
on speci c topics, consult the sources below.
Task Index
Task Index
............................................................
............................................................
P
P
ix
ix
Table of Contents
Table of Contents
.................................................
.................................................
P
P
xii
xii
Know what you want to do but don’t know the
name for it? Find the answer in the Task Index.
The Table of Contents gives an overview of the
entire manual. The principal camera operations
are listed here.
Troubleshooting
Troubleshooting
................................................
................................................
P
P
105
105
Warning Messages and Displays
Warning Messages and Displays
.........................
.........................
P
P
109
109
Having a speci c problem with the camera?
Find the answer here.
Find out whats behind that  ashing icon or error
message in the display.
Glossary
Glossary
............................................................
............................................................
P
P
113
113
Restrictions on Camera Settings
Restrictions on Camera Settings
..........................
..........................
P
P
120
120
The meanings of some technical terms may be
found here.
See page 120 for restrictions on the options avail-
able in each shooting mode.
Memory Cards
Memory Cards
Pictures can be stored in the cameras internal memory or on optional SD, SDHC, and SDXC memory cards (P 15),
referred to in this manual as “memory cards.
ix
Task Index
Task Index
Find items by task.
Taking Photographs
The optical view nder ................................................. 6, 18
Power management .......................................................... 23
Shutter sounds ...................................................................... 22
The self-timer ......................................................................... 44
Choosing Image Quality and Size
Image size ................................................................................ 69
Image quality ......................................................................... 70
RAW images ............................................................................ 56
Color space .............................................................................. 86
Focusing
Focus mode ............................................................................ 48
Focus frame selection ....................................................... 50
Focus lock ................................................................................. 46
Manual focus .......................................................................... 48
Adjusting Exposure
ISO sensitivity ......................................................................... 51
Auto ISO .................................................................................... 84
Metering .................................................................................... 52
Shutter speed and aperture ......................................... 28
Program autoexposure .................................................... 24
Shutter priority autoexposure ..................................... 25
Aperture priority autoexposure .................................. 26
Manual exposure ................................................................. 27
Long time exposures ......................................................... 29
Exposure lock ......................................................................... 46
Exposure compensation ................................................. 30
Adjusting Colors to the Light Source
White balance ........................................................................ 35
Film simulation ...................................................................... 54
Dynamic range ..................................................................... 70
Color/tone/sharpness ................................................70, 71
x
Task Index
Choosing a Drive Mode
Burst photography.............................................................. 37
Bracketing ................................................................................ 38
Panoramas ............................................................................... 39
Movies ........................................................................................ 42
Using the Flash
The built-in  ash.............................................................. 2, 32
Flash photography ............................................................. 32
Flash mode .............................................................................. 32
Flash compensation .......................................................... 71
Optional  ash units ..................................................71, 100
Custom Settings
Assigning a role to the Fn button .............................. 53
Saving and recalling settings ....................................... 55
xi
Caring for the Camera
Caring for the Camera
For continued enjoyment of your camera, use a soft, dry cloth to clean the camera body after each
use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform the leather
on the camera body. Any liquid on the camera should be removed immediately with a soft, dry cloth.
Use a blower to remove dust from the lens and monitor, then gently wipe with a soft, dry cloth. Any
remaining stains can be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to
which a small amount of lens-cleaning  uid has been applied. Care should be taken to avoid scratch-
ing the lens or monitor.
xii
Table of Contents
Table of Contents
For Your Safety ..................................................................................... ii
IMPORTANT SAFETY INSTRUCTIONS .........................................ii
Safety Notes .......................................................................................iii
NOTICES ..............................................................................................vii
About This Manual .......................................................................... viii
Task Index .............................................................................................ix
Caring for the Camera .....................................................................xi
Before You Begin
Before You Begin
Symbols and Conventions ..............................................................1
Supplied Accessories ........................................................................1
Parts of the Camera ...........................................................................2
The Command Dial ..........................................................................4
The Command Control ...................................................................5
Camera Displays ................................................................................6
Shooting: Optical View nder ....................................................6
Shooting: Electronic View nder ............................................... 7
Shooting: LCD Monitor ................................................................7
Playback: Electronic View nder/LCD Monitor ....................8
First Steps
First Steps
Attaching the Strap ...........................................................................9
Charging the Battery ..................................................................... 11
Inserting the Battery and a Memory Card ........................... 12
Compatible Memory Cards ..................................................... 15
Turning the Camera on and O ................................................ 16
Basic Setup ......................................................................................... 17
Choosing a Display ......................................................................... 18
Using the Hybrid View nder ..................................................... 19
Focusing the View nder ............................................................. 19
The DISP/BACK Button ....................................................................... 20
Optical View nder: Shooting ................................................. 20
Electronic View nder: Shooting............................................ 20
LCD Monitor: Shooting ............................................................. 20
Electronic View nder/LCD Monitor: Playback ................. 21
Choosing a Shutter Sound .......................................................... 22
Power Management ....................................................................... 23
G OVF POWER SAVE MODE ...................................................... 23
H QUICK START MODE ............................................................... 23
Taking Photographs
Taking Photographs
Program AE (P) .................................................................................. 24
Shutter-Priority AE (S) ................................................................... 25
Aperture-Priority AE (A) ............................................................... 26
Manual Exposure (M) ..................................................................... 27
Shutter Speed and Aperture ...................................................... 28
Long Time-Exposures (T/B) ......................................................... 29
Time (T) .............................................................................................. 29
Bulb (B) ............................................................................................... 29
Exposure Compensation .............................................................. 30
Focusing and Taking Pictures .................................................... 31
xiii
Table of Contents
More on Photography
More on Photography
N Using the Flash (Super-Intelligent Flash) ......................... 32
F Macro Mode (Close-ups) ......................................................... 34
White Balance ................................................................................... 35
I Continuous Shooting (Burst Mode) .................................. 37
Bracketing ........................................................................................... 38
Panoramas .......................................................................................... 39
F Recording High-De nition (HD) Movies ......................... 42
Before Recording ........................................................................... 43
h Using the Self-Timer ................................................................. 44
Focus/Exposure Lock ..................................................................... 46
Focus Mode ........................................................................................ 48
Focus Frame Selection .................................................................. 50
Sensitivity ........................................................................................... 51
Metering .............................................................................................. 52
The Fn Button .................................................................................... 53
Film Simulation ................................................................................ 54
Saving Settings ................................................................................. 55
The RAW Button ............................................................................... 56
The ND Filter ...................................................................................... 57
Viewing Pictures
Viewing Pictures
Viewing Pictures Full Frame ....................................................... 58
Playback Zoom ............................................................................... 59
Multi-Frame Playback ................................................................... 60
Viewing Movies ................................................................................ 61
Image Search ..................................................................................... 62
m PhotoBook Assist ...................................................................... 63
Creating a PhotoBook .................................................................. 63
Viewing Photobooks .................................................................... 64
Editing and Deleting Photobooks ........................................... 64
Viewing Panoramas ........................................................................ 65
Viewing Pictures Taken in a Single Burst .............................. 66
x Deleting Pictures ....................................................................... 67
Creating JPEG Copies of RAW Pictures .................................. 68
xiv
Table of Contents
Menus
Menus
Using the Menus: Shooting Mode ........................................... 69
Shooting Menu Options.............................................................. 69
B SELF-TIMER .............................................................................. 69
N ISO .............................................................................................. 69
O IMAGE SIZE .............................................................................. 69
T IMAGE QUALITY .................................................................... 70
U DYNAMIC RANGE.................................................................. 70
P FILM SIMULATION ................................................................ 70
t ND FILTER ................................................................................. 70
d WB SHIFT .................................................................................. 70
f COLOR ....................................................................................... 70
H SHARPNESS ............................................................................. 71
r HIGHLIGHT TONE .................................................................. 71
s SHADOW TONE ..................................................................... 71
h NOISE REDUCTION ............................................................... 71
F AF MODE .................................................................................. 71
I FLASH ........................................................................................ 71
g EXTERNAL FLASH ................................................................. 71
u SELECT CUSTOM SETTING ................................................ 72
K EDIT/SAVE CUSTOM SETTING .......................................... 72
v DISP. CUSTOM SETTING ..................................................... 72
Using the Menus: Playback Mode............................................ 73
Playback Menu Options .............................................................. 73
m PHOTOBOOK ASSIT .............................................................. 73
t IMAGE SEARCH ...................................................................... 73
A ERASE ........................................................................................ 73
j MARK FOR UPLOAD TO ...................................................... 74
I SLIDE SHOW ........................................................................... 75
j RAW CONVERSION ............................................................... 75
B RED EYE REMOVAL ............................................................... 75
D PROTECT .................................................................................. 76
G CROP .......................................................................................... 76
e RESIZE ....................................................................................... 77
C IMAGE ROTATE ....................................................................... 77
E COPY .......................................................................................... 78
K PRINT ORDER (DPOF) .......................................................... 78
J
DISP ASPECT ........................................................................... 78
xv
Table of Contents
The Setup Menu ............................................................................... 79
U
sing the Setup Menu ................................................................. 79
Setup Menu Options .................................................................... 80
F DATE/TIME ............................................................................... 80
N TIME DIFFERENCE ................................................................. 80
L a ................................................................................ 80
o SILENT MODE ......................................................................... 80
R RESET ......................................................................................... 80
K FORMAT .................................................................................... 81
A IMAGE DISP. ............................................................................. 81
B FRAME NO. .............................................................................. 82
G OPERATION VOL. ...................................................................82
H SHUTTER VOLUME ............................................................... 82
e SHUTTER SOUND .................................................................. 82
I PLAYBACK VOLUME ............................................................. 82
J LCD BRIGHTNESS .................................................................. 83
M AUTO POWER OFF ................................................................ 83
G OVF POWER SAVE MODE ................................................... 83
H QUICK START MODE ............................................................ 83
F Fn BUTTON .............................................................................. 83
N ISO AUTO CONTROL ............................................................ 84
B RED EYE REMOVAL ............................................................... 84
C AF ILLUMINATOR .................................................................. 85
k AE/AF-LOCK MODE .............................................................. 85
v AE/AF-LOCK BUTTON.......................................................... 85
j FOCUS CHECK ........................................................................ 85
I FOCUS RING ............................................................................ 85
M FOCUS SCALE UNITS ........................................................... 85
z FRAMING GUIDLINE ............................................................ 86
J COLOR SPACE ......................................................................... 86
K LONG EXPOSURE NR ........................................................... 86
n SAVE ORG IMAGE .................................................................. 87
m AUTOROTATE PB ................................................................... 87
O BACKGROUND COLOR ........................................................ 87
c GUIDANCE DISPLAY ............................................................. 87
G
CORRECTED AF FRAME ...................................................... 87
xvi
Table of Contents
Connections
Connections
Viewing Pictures on TV ................................................................. 88
Printing Pictures via USB ............................................................. 89
Connecting the Camera .............................................................. 89
Printing Selected Pictures .......................................................... 89
Printing the DPOF Print Order .................................................. 90
Creating a DPOF Print Order...................................................... 91
WITH DATE
s/ WITHOUT DATE ........................................... 92
RESET ALL ....................................................................................... 93
Viewing Pictures on a Computer .............................................. 94
Windows: Installing MyFinePix Studio .................................. 94
Macintosh: Installing FinePixViewer ....................................... 96
Connecting the Camera .............................................................. 98
Technical Notes
Technical Notes
Optional Accessories....................................................................100
Accessories from FUJIFILM .......................................................100
Attaching Adapter Rings and Lens Hoods .........................101
Connecting the Camera to Other Devices ......................... 102
Caring for the Camera ................................................................. 103
Storage and Use ...........................................................................103
Cleaning ..........................................................................................104
Traveling .......................................................................................... 104
Troubleshooting
Troubleshooting
Problems and Solutions .............................................................105
Warning Messages and Displays ............................................ 109
Appendix
Appendix
Glossary .............................................................................................113
Internal Memory/Memory Card Capacity ..........................114
Speci cations ..................................................................................115
Restrictions on Camera Settings ............................................ 120
1
Before You Begin
Before You Begin
Before You Begin
Symbols and Conventions
Symbols and Conventions
The following symbols are used in this manual:
Q This information should be read before use to ensure correct operation.
R Additional information that may be helpful when using the camera.
P Other pages in this manual on which related information may be found.
Menus and other text in the displays are shown in bold. In the illustrations in this manual, displays may
be simpli ed for explanatory purposes.
Supplied Accessories
Supplied Accessories
The following items are included with the camera:
NP-95 rechargeable battery BC-65N battery charger Lens cap USB cable
Owners Manual (this
manual)
• Shoulder strap
• Protective covers (× 2)
CD-ROM Clip attaching tool Metal strap clips (× 2)
2
Parts of the Camera
Parts of the Camera
For more information, refer to the page listed to the right of each item.
1 Shutter button ..................................................31
2 Exposure compensation dial .............................30
3 Shutter speed dial .................................24, 25, 27
4 Hot shoe ...................................................71, 102
5 Flash .................................................................32
6 Microphone (L) .................................................42
7 View nder window ....................................18, 19
8 Strap eyelet ........................................................9
9 Focus mode selector .........................................48
10 Aperture ring ........................................24, 26, 27
11 Focus ring .........................................................48
12 Lens ................................................................104
13 Front ring ........................................................101
14 AF-assist illuminator .........................................85
Self-timer lamp ................................................45
15 View nder selector ...........................................19
16 Microphone (R) .................................................42
17 ON/OFF switch .................................................16
18 Fn (Function) button ........................................53
19 Battery latch ...............................................12, 14
20 Memory card slot ..............................................13
21 Battery chamber ...............................................12
22 Eye sensor .........................................................18
23 Command control ...............................................5
24 Connector cover ....................................88, 89, 98
25 Cable channel cover for DC coupler
26 Battery-chamber cover latch ............................12
27 Battery-chamber cover .....................................12
28 Tripod mount
29 Speaker .............................................................61
30 LCD monitor ....................................................7, 8
31 USB connector ............................................89, 98
32 HDMI mini connector ........................................88
3
Before You Begin
Parts of the Camera
36 AF (autofocus) button ......................................50
n (playback zoom out) button ..................59, 60
37 VIEW MODE button .........................................18
38 AFL/AEL (focus lock/exposure) button .......46, 48
39 Indicator lamp (see below)
40 MENU/OK button ...............................................4
41 Command dial ....................................................4
42 RAW button .....................................................56
43 DISP (display)/BACK button ............................20
33 Diopter adjustment control ...............................19
34 a (playback) button.......................................58
35 AE (autoexposure) button ................................52
k (playback zoom in) button ....................59, 60
The Indicator Lamp
The Indicator Lamp
The indicator lamp shows camera status as follows:
Indicator lamp
Indicator lamp
Camera status
Camera status
Glows green
Glows green Focus locked.
Blinks green
Blinks green Blur, focus, or exposure warning. Picture can be taken.
Blinks green and orange
Blinks green and orange Recording pictures. Additional pictures can be taken.
Glows orange
Glows orange Recording pictures. No additional pictures can be taken at this time.
Blinks orange
Blinks orange Flash charging;  ash will not  re when picture is taken.
Blinks red
Blinks red Lens or memory error.
Indicator lamp
R Warnings may also appear in the display (P 109)
4
Parts of the Camera
The Command Dial
The Command Dial
Rotate the command dial or press it up (
q
), right (
w
), down (
e
), or left (
r
) to highlight items and
press MENU/OK (
t
) to select.
The command dial also serves as the following buttons:
q
: b (delete) button (P 58)/DRIVE button (P 37)
w
:
N ( ash) button (P 32)
e
: WB (white balance) button (P 35)
r
: F (macro) button (P 34)
You can also rotate the command dial to choose a combination of shutter speed and aperture
(program shift; P 24) or to adjust shutter speed in increments of 
/
 EV (P 25, 27).
Control Lock
Control Lock
To lock the RAW button and prevent the command dial being used as a DRIVE,  ash, white balance, or macro
button, press MENU/OK until X is displayed. This prevents accidental operation of these controls during shooting.
The controls can be unlocked by pressing MENU/OK until X is no longer displayed.
5
Before You Begin
Parts of the Camera
The Command Control
The Command Control
Pressing the command control left or right performs the same function as pressing the command dial
left or right. It can also be used to choose a combination of shutter speed and aperture in place of the
command dial (program shift; P 24) or to adjust aperture in increments of 
/
 EV (P 26, 27).
You can also press the center of the command dial to zoom in on the focus area selected for manual
focus in the electronic view nder or LCD monitor, or to zoom in on the active focus point during play-
back or (if CONTINUOUS is selected for A IMAGE DISP. in the setup menu; P 81) image review (press
again to cancel zoom).
6
Parts of the Camera
Camera Displays
Camera Displays
The following types of indicator may be displayed during shooting and playback. Indicators vary with
camera settings.
Shooting: Optical View nder
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10m
F
P
100
F5.6
200
2000
F
100
1 Manual focus indicator .....................................48
2 Flash mode .......................................................32
3 Metering ...........................................................52
4 White balance ...................................................35
5 Film simulation .................................................54
6 Dynamic range .................................................70
7 ND (Neutral Density)  lter indicator .................57
8 Internal memory indicator
*
9 Number of available frames ............................114
10 Image quality and size ................................69, 70
11 Battery level .....................................................16
12 Focus frame ................................................46, 50
13 Virtual horizon ..................................................72
14 Temperature warning .....................................112
15 Bright frame
16 Distance indicator .......................................48, 85
17 Sensitivity .........................................................51
18 Aperture ...............................................24, 26, 27
19 Shutter speed .......................................24, 25, 27
20 Shooting mode ............................... 24, 25, 26, 27
21 Histogram .........................................................21
22 Exposure compensation/
exposure indicator ......................................27, 30
*
a: indicates that no memory card is inserted and that
pictures will be stored in the camera’s internal memory
(P 13).
7
Before You Begin
Parts of the Camera
Shooting: Electronic View nder
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10m
F
100
P
2000 F5.6 200
1 Manual focus indicator .....................................48
2 Metering ...........................................................52
3 Continuous mode .............................................37
4 Silent mode indicator .......................................22
5 Virtual horizon ..................................................72
6 Internal memory indicator
*
7 Focus warning ..........................................31, 109
8 Number of available frames ............................114
9 Temperature warning .....................................112
10 Image quality and size ................................69, 70
11 Dynamic range .................................................70
12 Film simulation .................................................54
13 White balance ...................................................35
14 Battery level .....................................................16
15 ND (Neutral Density)  lter indicator .................57
16 Distance indicator .......................................48, 85
17 Sensitivity .........................................................51
18 Blur warning ...................................................109
19 Aperture ...............................................24, 26, 27
20 Shutter speed .......................................24, 25, 27
21 Shooting mode .................................................24
22 Histogram .........................................................21
23 Exposure compensation/
exposure indicator ......................................27, 30
24 Self-timer indicator ..........................................44
25 Macro (close-up) mode .....................................34
26 Flash mode .......................................................32
27 Depth-of- eld preview .....................................26
28 Focus frame ................................................46, 50
*
a: indicates that no memory card is inserted and that
pictures will be stored in the camera’s internal memory
(P 13).
Shooting: LCD Monitor
F
2000
1F5.6
000100
P
200
1 Flash mode .......................................................32
2 Macro (close-up) mode .....................................34
3 Metering ...........................................................52
4 Continuous mode .............................................37
5 Silent mode indicator .......................................22
6 ND (Neutral Density)  lter indicator .................57
7 Internal memory indicator
*
8 Number of available frames ............................114
9 Temperature warning .....................................112
10 Image quality and size ................................69, 70
11 Dynamic range .................................................70
12 Film simulation .................................................54
13 White balance ...................................................35
14 Battery level .....................................................16
15 Sensitivity .........................................................51
16 Aperture ...............................................24, 26, 27
17 Focus frame/focus point .............................46, 50
18 Shutter speed .......................................24, 25, 27
19 Shooting mode .................................................24
20 Focus mode ......................................................48
21 Self-timer indicator ..........................................44
22 Exposure compensation/
exposure indicator ......................................27, 30
* a: indicates that no memory card is inserted and that
pictures will be stored in the camera’s internal memory
(P 13).
8
Parts of the Camera
Playback: Electronic View nder/LCD Monitor
100-0001
100-0001
12 / 31 / 2050
12 / 31 / 2050
1/1000 F4.5
200
10 :00
AM
10 :00
AM
2
-
1
3
3:2
3:2
F
F
YouTube
1 Rating ...............................................................58
2 Red-eye removal indicator ................................75
3 Silent mode indicator .......................................22
4 Gift image .........................................................58
5 Frame number ..................................................82
6 Playback mode indicator...................................58
7 Mark for upload to ............................................74
8 Photobook assist indicator ................................63
9 DPOF print indicator .........................................90
10 Protected image ...............................................76
9
First Steps
First Steps
First Steps
Attaching the Strap
Attaching the Strap
Attach the strap clips to the camera and then attach the strap.
1
Open a strap clip.
Use the clip attaching tool to open a strap clip
as shown.
Q Keep the tool in a safe place. You will need it to
open the strap clips when removing the strap.
2
Place the strap clip on an eyelet.
Hook the strap eyelet in the clip opening. Re-
move the tool, using the other hand to keep
the clip in place.
3
Pass the clip through the eyelet.
Rotate the clip fully through
the eyelet until it clicks
closed.
4
Attach a protective cover.
Place a protective cover over the eyelet as
shown, with the black side of the cover toward
the camera. Repeat Steps 1–4 for the second
eyelet.
10
Attaching the Strap
5
Insert the strap.
Insert the strap through a protective cover
and strap clip.
6
Fasten the strap.
Fasten the strap as shown. Repeat Steps 5–6
for the second eyelet.
Q To avoid dropping the camera, be sure the strap is
correctly secured.
11
First Steps
Charging the Battery
Charging the Battery
The battery is not charged at shipment. Charge
the battery before use.
1
Place the battery in the supplied battery
charger.
Insert the battery in the orientation indicated
by the
DFC labels.
Battery charger
DFC
label
Battery
DFC label
Charge
lamp
Arrow
The camera uses an NP-95 rechargeable battery.
R Attach the supplied adapter
before charging the battery
(the adapter is attached at
shipment).
Adapter
2
Plug the charger in.
Plug the charger into a power outlet. The
charging indicator will light.
The Charging Indicator
The Charging Indicator
The charging indicator shows battery charge sta-
tus as follows:
Charging
Charging
indicator
indicator
Battery status
Battery status
Action
Action
O
O
Battery not
Battery not
inserted.
inserted.
Insert the battery.
Insert the battery.
Battery fully
Battery fully
charged.
charged.
Remove the battery.
Remove the battery.
On
On
Battery charging.
Battery charging.
Blinks
Blinks
Battery fault.
Battery fault.
Unplug the charger
Unplug the charger
and remove the
and remove the
battery.
battery.
3
Charge the battery.
Remove the battery when charging is com-
plete. See the speci cations (P 118) for charg-
ing times (note that charging times increase
at low temperatures).
Q Unplug the charger when it is not in use.
12
Inserting the Battery and a Memory Card
Inserting the Battery and a Memory Card
Although the camera can store pictures in internal memory, optional SD, SDHC, and SDXC memory
cards (sold separately) can be used to store additional pictures. After charging the battery, insert the
battery and memory card as described below.
1
Open the battery-chamber cover.
R Be sure the camera is o before opening the
battery-chamber cover.
Q Do not open the battery-chamber cover when
the camera is on. Failure to observe this precau-
tion could damage image  les or memory cards.
Q Do not use excessive force when handling the
battery-chamber cover.
2
Insert the battery.
Insert the battery as shown inside the battery
chamber, using the battery to keep the bat-
tery latch pressed to one side.
Battery latch
Arrow
Q Insert the battery in the correct orientation. Do
not use force or attempt to insert the battery up-
side down or backwards. The battery will slide in
easily in the correct orientation.
13
First Steps
Inserting the Battery and a Memory Card
3
Insert the memory card.
Holding the memory
card in the orientation
shown at right, slide
it in until it clicks into
place at the back of
the slot.
Click
Q Be sure card is in the correct orientation; do not
insert at an angle or use force. If the memory
card is not correctly inserted or no memory card
is inserted, a will appear in the display and in-
ternal memory will be used for recording and
playback.
Q SD/SDHC/SDXC memo-
ry cards can be locked,
making it impossible to
format the card or to
record or delete images.
Before inserting a memory card, slide the write-
protect switch to the unlocked position.
4
Close the battery-chamber cover.
Write-protect switch
14
Inserting the Battery and a Memory Card
Removing the Battery and Memory Card
Removing the Battery and Memory Card
Before removing the battery or memory card, turn
the camera o and open the battery-chamber cover.
To remove the battery, press
the battery latch to the side,
and slide the battery out of
the camera as shown.
Battery latch
To remove the memory card,
press it in and release it slowly.
The card can then be removed
by hand. When a memory card
is removed, the card could
come out of the slot too quickly. Use your  nger to
hold it and gently release the card.
Q
Q
Batteries
Batteries
Remove dirt from the battery terminals with a clean,
dry cloth. Failure to observe this precaution could
prevent the battery from charging.
Do not a x stickers or other objects to the battery.
Failure to observe this precaution could make it im-
possible to remove the battery from the camera.
Do not short the battery terminals. The battery could
overheat.
Read the cautions in The Battery and Power Supply
(
P iv).
Use only battery chargers designated for use with the
battery. Failure to observe this precaution could re-
sult in product malfunction.
Do not remove the labels from the battery or attempt
to split or peel the outer casing.
The battery gradually loses its charge when not in
use. Charge the battery one or two days before use.
15
First Steps
Inserting the Battery and a Memory Card
Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC mem-
ory cards have been approved for use in the cam-
era. A complete list of approved memory cards
is available at http://www.fujifilm.com/support/
digital_cameras/compatibility/. Operation is not
guaranteed with other cards. The camera can not
be used with xD-Picture Cards or MultiMediaCard
(MMC) devices.
Q
Q
Memory Cards
Memory Cards
Do not turn the camera o or remove the memory
card while the memory card is being formatted or
data are being recorded to or deleted from the card.
Failure to observe this precaution could damage the
card.
• Format memory cards before  rst use, and be sure
to reformat all memory cards after using them in a
computer or other device. For more information on
formatting memory cards, see page 81.
Memory cards are small and can be swallowed; keep
out of reach of children. If a child swallows a memory
card, seek medical assistance immediately.
miniSD or microSD adapters that are larger or smaller
than the standard dimensions of an SD/SDHC/SDXC
card may not eject normally; if the card does not
eject, take the camera to an authorized service repre-
sentative. Do not forcibly remove the card.
• Do not a x labels to memory cards. Peeling labels
can cause camera malfunction.
Movie recording may be interrupted with some types
of SD/SDHC/SDXC memory card. Use a
G card
or better when shooting HD movies.
The data in internal memory may be erased or cor-
rupted when the camera is repaired. Please note that
the repairer will be able to view pictures in internal
memory.
Formatting a memory card or internal memory in the
camera creates a folder in which pictures are stored.
Do not rename or delete this folder or use a comput-
er or other device to edit, delete, or rename image
les. Always use the camera to delete pictures from
memory cards and internal memory; before editing
or renaming  les, copy them to a computer and edit
or rename the copies, not the originals. Renaming
the  les on the camera can cause problems during
playback.
16
Turning the Camera on and O
Turning the Camera on and O
Rotate the ON/OFF switch to ON to turn the camera on. Select OFF to turn
the camera o .
R Press the a button to start playback. Press the shutter button halfway to
return to shooting mode.
R The camera will turn o automatically if no operations are performed for the
length of time selected for M AUTO POWER OFF (P 83). To reactivate the camera after it has turned o auto-
matically, press the shutter button halfway or turn the ON/OFF switch to OFF and then back to ON.
R For information on other power saving and startup options, see page 23.
Q Fingerprints and other marks on the lens or view nder can a ect pictures or the view through the view nder.
Keep the lens and view nder clean.
Battery Level
Battery Level
After turning the camera on, check the battery level in the display.
Indicator
Indicator
Description
Description
D (white) Battery partially discharged.
C (white) Battery more than half discharged
B (red) Low battery. Charge as soon as possible.
A (blinks red) Battery exhausted. Turn camera o and recharge battery.
P
17
First Steps
Basic Setup
Basic Setup
A language-selection dialog is displayed the  rst time the camera is turned on. Set up the camera as
described below (you can reset the clock or change languages at any time using the F DATE/TIME
or L a options in the setup menu; for information on displaying the setup menu, see page 80).
1
Choose a language.
START MENU
NOSET
ENGLISH
DEUTSCH
FRANCAIS
Highlight a language and press MENU/OK.
R Press DISP/BACK to skip the current step. Any steps you skip will be displayed
the next time the camera is turned on.
2
Set the date and time.
NOSET
2013
2012
2010
2009
1. 1 12
:
00
AM
2011
YY. MM. DD
DATE / TIME NOT SET
Press the command dial left or right to highlight the year, month, day,
hour, or minute and press up or down to change. To change the order
in which the year, month, and day are displayed, highlight the date
format and press the command dial up or down. Press MENU/OK to exit
to shooting mode when settings are complete.
R If the battery is removed for an extended period, the camera clock will be reset and the language-selection
dialog will be displayed when the camera is turned on.
18
Choosing a Display
Choosing a Display
The camera is equipped with a hybrid optical/electronic view nder
(OVF/EVF) and an LCD monitor (LCD). Press VIEW MODE to choose a dis-
play.
LCD
OVF/EVF
OVF/EVF
LCD
Automatic display selection
using eye sensor
View nder only LCD monitor only
Automatic Display Selection
Automatic Display Selection
In this mode, the view nder turns on automatically when you put your eye to the view-
nder, and the LCD monitor turns on when you take your eye away (note that the eye sensor
may respond to objects other than your eye or to light shining directly on the sensor).
Eye sensor
19
First Steps
Choosing a Display
Using the Hybrid View nder
Using the Hybrid View nder
Use the view nder selector to
choose between optical and
electronic view nders.
P
F5.6
200
2000
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10m
P
2000 F5. 6 200
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10m
Optical view nder display Electronic view nder display
Focusing the View nder
Focusing the View nder
The camera is equipped with
diopter adjustment (–2 – +1 m
–1
(dpt)) to accommodate individ-
ual di erences in vision. Rotate
the diopter adjustment control
until the view nder display is in sharp focus.
Choosing a Display
Choosing a Display
Choose a display according to the task.
Display
Display
Description
Description
Optical
Optical
view nder
view nder
(OVF)
(OVF)
This display is immune from digital video e ects and allows the subject to be viewed directly with no display
lag. Subjects are always in focus, allowing you to check their expression at any time, while a  eld of view
slightly larger than that of the lens makes it easier to locate your subject without removing your eye from
the view nder. The view nder window is however at a slight distance from the lens, with the result that the
display in the view nder may di er slightly from the  nal photograph due to parallax.
Electronic
Electronic
view nder
view nder
(EVF)
(EVF)
This display shows the view through the lens and has exactly the same  eld of view, allowing you to frame
your subjects precisely and preview focus, depth of  eld, exposure, and white balance (although there may
be a slight display lag). It can also be used to view photographs after shooting.
LCD monitor
LCD monitor
This display is identical to the electronic view nder, except that its large size makes it easier to view shooting
indicators and the view through the lens. It may however be di cult to see in bright light.
20
The
The
DISP/BACK
DISP/BACK
Button
Button
The DISP/BACK button controls the display of indicators in the view nder and LCD monitor.
Optical View nder: Shooting
P
F5.6
200
2000
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10m
F
P
100
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10m
F5.6
200
2000
Standard display Custom display
Electronic View nder: Shooting
P
2000 F5. 6 200
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10m
F
P
100
2000 F5. 6 200
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10m
Standard display Custom display
LCD Monitor: Shooting
Detailed display Standard display
F
2000
1F5.6
000100
P
200
P
2000 F5. 6 200
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10m
F
P
100
2000 F5. 6 200
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10m
Custom display
Custom Display
Custom Display
Choose items for display using v DISP. CUSTOM SETTING in the shooting menu (P 72):
Framing grid Exposure compensation/exposure indicator Dynamic range
Virtual horizon Metering Number of exposures remaining/media
Autofocus distance Flash mode Image quality and size
Histogram White balance Battery level
Exposure (shutter speed, aperture, and sensitivity) Film simulation
R See pages 6 7 for the locations of these items in the displays.
21
First Steps
The DISP/BACK Buttion
Electronic View nder/LCD Monitor: Playback
Indicators displayed Indicators hidden Favorites Photo information
100-0001
100-0001
12 /31 /2050
12 /31 /2050
1 /1000 F4. 5
10 : 00
AM
10 : 00
AM
2
-
1
3
3:2
3:2
F
F
200
100-0001
100-0001
3
12 /31 /2050 10 :00
AM
:
:
:
: OFF
ISO
200
1/1000
F
4.5
2
3
-
1
12 /31 /2050 10 :00
AM
100-0001
3:2
F
Q The optical view nder can not be used for playback.
Histograms
Histograms
Histograms show the distribution of tones in the im-
age. Brightness is shown by the horizontal axis, the
number of pixels by the vertical axis.
Pixel brightness
No. of pixels
Shadows Highlights
Optimal exposure: Pixels are distrib-
uted in an even curve through-
out the tone range.
Overexposed: Pixels are clustered
on the right side of the graph.
Underexposed: Pixels are clustered
on the left side of the graph.
22
Choosing a Shutter Sound
Choosing a Shutter Sound
Use the e SHUTTER SOUND item in the setup menu to choose the sound made by the shutter.
1
Press MENU/OK to display the menus.
2
Press the command dial left to se-
lect the tab for the current menu.
Tab
SET
SHOOTING MENU
DYNAMIC RANGE
F
3
:
2
ISO
200
SELF-TIMER
OFF
FILM SIMULATION
P
IMAGE SIZE
IMAGE QUALITY
EXIT
3
Highlight the setup menu tab (X)
and press the command dial right to
place the cursor in the setup menu.
4
Highlight e SHUTTER SOUND
and press the command dial right.
SET
SET-UP
IMAGE DISP.
FRAME NO.
SHUTTER VOLUME
OPERATION VOL.
SHUTTER SOUND
PLAYBACK VOLUME
1.5
SEC
CONT.
SOUND
1
SOUND
2
SOUND
3
5
Highlight one of the following op-
tions and press MENU/OK.
i: A leaf shutter sound.
j: A focal plane shutter sound.
k: A mirror re ex sound.
6
Press DISP/BACK to return to shooting
mode.
Silent Mode
Silent Mode
In situations in which camera sounds or lights may be unwelcome, press the
DISP/BACK button for a second, or select ON for
o SILENT MODE in the setup
menu (P 80; note that silent mode is not available during movie playback). The
camera speaker,  ash, and AF-assist illuminator/self-timer lamp turn o and
ash and volume settings can not be adjusted.
23
First Steps
Power Management
Power Management
The setup menu contains the following power management options. For information on using the
setup menu, see the previous page.
G
G
OVF POWER SAVE MODE
OVF POWER SAVE MODE
Selecting ON for G OVF POWER SAVE MODE
approximately doubles the number of photo-
graphs that can be taken with a fully-charged
battery.
R Selecting ON increases the time required for auto-
focus to about 0.4 seconds, compared to about 0.2
seconds when OFF is selected (the time required to
focus varies with the subject).
R When power saving is in e ect, shooting informa-
tion is not displayed until the shutter button is
pressed halfway.
Q Power saving is available only when the optical
view nder is used.
H
H
QUICK START MODE
QUICK START MODE
To reduce camera startup time, select ON for
H QUICK START MODE.
R ON reduces startup time to about 0.7 seconds, com-
pared to about 2.2 seconds when OFF is selected.
Q The camera will need 2.2 seconds to start up if it is
left o for more than about 20 minutes.
Q The camera requires slightly longer to start up when
a short focus distance is selected for manual focus.
Q Selecting ON increases the drain on the battery, re-
ducing the number of pictures that can be taken on
a single charge.
24
Taking Photographs
Taking Photographs
Program AE (P)
Program AE (P)
To allow the camera to adjust both shutter speed and aperture
for optimal exposure, rotate the aperture ring and shutter speed
dial to A. P will appear in the display.
Q If the subject is outside the metering range of the camera, the shutter
speed and aperture displays will show “– –”.
P
F5.6
200
2000
P
2000 F5. 6 200
Optical view nder EVF/LCD
Program Shift
Program Shift
If desired, you can rotate the command dial or press the command con-
trol left or right to other combinations of shutter speed and aperture
without altering exposure (program shift). Program shift is not avail-
able when a  ash is used, AUTO is selected for U DYNAMIC RANGE
in the shooting menu (P 70), or ON is selected for N ISO AUTO CON-
TROL in the setup menu (P84).
P
2000 F5. 6 200
Shutter speed
Aperture
25
Taking Photographs
Shutter-Priority AE (S)
Shutter-Priority AE (S)
To adjust shutter speed manually while letting the camera select
aperture for optimal exposure, rotate the aperture ring to A and
use the shutter speed dial. S will appear in the display.
Q If the correct exposure can not be achieved at the selected shutter
speed, aperture will be displayed in red when the shutter button is
pressed halfway. Adjust shutter speed until the correct exposure is
achieved.
Q If the subject is outside the metering range of the camera, the aper-
ture display will show “–––”.
S
200
F5.62000
S
2000 F5. 6 200
Optical view nder EVF/LCD
R Shutter speed can also be adjusted in increments of 
/
EV by rotating
the command dial.
Command dial
26
Aperture-Priority AE (A)
Aperture-Priority AE (A)
To adjust aperture manually while letting the camera select shut-
ter speed for optimal exposure, rotate the shutter speed dial to A
and use the aperture ring. A will appear in the display.
Q If the correct exposure can not be achieved at the selected aper-
ture, the shutter speed will be displayed in red when the shutter but-
ton is pressed halfway. Adjust aperture until the correct exposure is
achieved.
Q If the subject is outside the metering range of the camera, the shutter
speed display will show “– –”.
Q The slowest shutter speed available when ON is selected for G OVF
POWER SAVE MODE is 
/
 s (P 23).
A
F5.6
200
2000
A
2000 F5. 6 200
Optical view nder EVF/LCD
R Aperture can also be adjusted in increments of 
/
EV by pressing the
command control left or right.
Command control
Depth of Field
Depth of Field
The aperture ring can be used to adjust aperture before recording begins. Choose
a low f-numbers to soften background details. The e ect can be heightened by
increasing the distance between your subject and the background.
Previewing Depth of Field
Previewing Depth of Field
When L PREVIEW DEPTH OF FIELD is selected for F Fn BUTTON (P 53) in the set-up
menu, pressing the Fn button stops aperture down to the selected setting, allowing depth
of  eld to be previewed in the electronic view nder or LCD monitor.
27
Taking Photographs
Manual Exposure (M)
Manual Exposure (M)
Exposure can be altered from the value suggested by the camera
by rotating both the shutter speed dial and aperture ring to set-
tings other than A. M will appear in the display.
R The command dial and command control can be used to adjust
shutter speed and aperture by ±
/
EV from the selected value in steps
of 
/
EV. Use the command dial to adjust shutter speed, the com-
mand control to adjust aperture.
Command dial Command control
M
F5.6
200
2000
M
2000 F5. 6 200
Optical view nder EVF/LCD
R The manual exposure display includes an exposure indicator that
shows the amount the picture would be under- or over-exposed at
current settings.
M
2000 F5. 6 200
28
Shutter Speed and Aperture
Shutter Speed and Aperture
Because the camera uses a lens-internal shutter, fast shutter speeds may not be available at large
apertures. If the selected combination of shutter speed and aperture is unavailable, shutter speed or
aperture will be displayed in red and the desired exposure may not be achieved.
Aperture
Aperture
Shutter speed
Shutter speed
/
/


s
s
/
/


s
s
/
/


s or slower
s or slower
F2
F2
Not available
Not available
Not available
Not available
Available
Available
F2.8
F2.8
F4
F4
Available
Available
F5.6
F5.6
F8 or above
F8 or above
Available
Available
29
Taking Photographs
Long Time-Exposures (T/B)
Long Time-Exposures (T/B)
Select a shutter speed of T (time) or B (bulb) for long time-exposures.
R Use of a tripod is recommended to prevent the camera from moving during the exposure.
R To reduce “noise (mottling) in long time-exposures, select ON for K LONG EXPOSURE NR in the set-up
menu. Note that this may increase the time needed to record images after shooting.
Time (T)
Time (T)
1
Rotate the shutter speed dial to T.
2
Rotate the command dial to choose
a shutter speed between / s and
30 s in steps of / EV.
S
1”
F5. 6 200
3
Press the shutter button all the way
down to take a picture at the select-
ed shutter speed.
Bulb (B)
Bulb (B)
1
Rotate the shutter speed dial to B.
2
Press the shutter button all the way
down. The shutter will remain open
for up to 60 minutes while the shut-
ter button is pressed.
R Rotating the aperture ring to A xes shutter speed
at 30 s.
Using a Remote Release
Using a Remote Release
A remote release (available from third-party suppli-
ers) can be used for long time-exposures.
30
Exposure Compensation
Exposure Compensation
Rotate the exposure compensation dial to adjust exposure when photographing very bright,
very dark, or high-contrast subjects. The e ect is visible in the LCD monitor and electronic
view nder; when using the optical view nder, use the exposure indicator to check exposure.
Exposure compensation indicator
P
F5.6
200
2000
P
2000 F5. 6 200
2000
1F5.6
000100
P
200
F
OVF EVF LCD
Choose positive values (+) to
increase exposure
Choose negative values (–) to
reduce exposure
Choosing an Exposure Compensation Value
Choosing an Exposure Compensation Value
Backlit subjects: Choose values
from +
/
EV to +1
/
EV (for an
explanation of the term “EV,
see the Glossary on page 113).
Highly re ective subjects or very
bright scenes (e.g., snow elds): +1 EV
Scenes that are mostly sky: +1 EV
Spotlit subjects (particularly if photographed against dark back-
grounds): –
/
 EV
Subjects with low re ectivity (pine trees or dark-colored foliage):
–
/
 EV
31
Taking Photographs
Focusing and Taking Pictures
Focusing and Taking Pictures
Press the shutter button halfway to focus and the rest of the way down to shoot.
1
Focus.
Frame the picture with your subject in the center focus area and press the shutter button
halfway to focus.
R If the subject is poorly lit, the AF-assist illuminator may light (P 85).
If the camera is able to focus, it will beep twice and focus area will glow green. Focus and exposure will
lock while the shutter button is pressed halfway.
If the camera is unable to focus, the focus frame will turn red, and s will be displayed.
2
Shoot.
Smoothly press the shutter button the rest of the way down to take the picture.
32
More on Photography
More on Photography
N
N
Using the Flash (Super-Intelligent Flash)
Using the Flash (Super-Intelligent Flash)
When the  ash is used, the cameras Super-Intelligent Flash system instantly analyzes the scene based
on such factors as the brightness of the subject, its position in the frame, and its distance from the
camera. Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed
while preserving the e ects of ambient background lighting, even in dimly-lit indoor scenes. Use the
ash when lighting is poor, for example when shooting at night or indoors under low light.
To choose a  ash mode, press the command dial right (
N) to display the following
options, then rotate the dial or press it left or right to highlight an option and press
MENU/OK to select.
Mode
Mode
Description
Description
AUTO
AUTO
(AUTO FLASH)
(AUTO FLASH)
/
/
K
K
(RED EYE REDUCTION)
(RED EYE REDUCTION)
*
*
The  ash  res when required. Recommended in most situations.
N
N
(FORCED FLASH)
(FORCED FLASH)
/
/
L
L
(FORCED FLASH)
(FORCED FLASH)
*
*
The  ash  res whenever a picture is taken. Use for backlit subjects or for natural
coloration when shooting in bright light.
P
P
(SUPPRESSED FLASH)
(SUPPRESSED FLASH)
The  ash does not  re even when the subject is poorly lit. Use of a tripod is recom-
mended.
O
O
(SLOW SYNCHRO)
(SLOW SYNCHRO)
/
/
M
M
(RED-EYE & SLOW)
(RED-EYE & SLOW)
*
*
Capture both the main subject and the background under low light (note that
brightly lit scenes may be overexposed).
According to
shooting conditions
AUTO FLASH
P
* Red-eye removal (K, L, or M) is available in these modes when ON is selected for B RED
EYE REMOVAL in the setup menu (P 84). Red-eye removal minimizes red-eye caused when
light from the  ash is re ected from the subjects retinas as shown in the illustration at right.
33
More on Photography
N Using the Flash (Super-Intelligent Flash)
R If p is displayed when the shutter button is pressed halfway, the  ash will  re when the photo is taken.
R The  ash may  re several times with each shot. Do not move the camera until shooting is complete.
R Remove lens hoods to prevent shadows in photos taken with the  ash.
Q Flash is not  red in silent mode.
Aperture, Sensitivity, and Flash Range
Aperture, Sensitivity, and Flash Range
Flash range varies with sensitivity and aperture.
Aperture at sensitivity of
Aperture at sensitivity of
Range
Range
200
200
400
400
800
800
1600
1600
3200
3200
6400
6400
m
m
ft.
ft.
2
2
0.5
0.5
18
18
1.6 59
1.6 – 59
2
2
2.8
2.8
0.5
0.5
13
13
1.6 42
1.6 – 42
2
2
2.8
2.8
4
4
0.5
0.5
9.0
9.0
1.6 29
1.6 – 29
2
2
2.8
2.8
4
4
5.6
5.6
0.5
0.5
6.4
6.4
1.6 20
1.6 – 20
2
2
2.8
2.8
4
4
5.6
5.6
8
8
0.5
0.5
4.5
4.5
1.6 14
1.6 – 14
2
2
2.8
2.8
4
4
5.6
5.6
8
8
11
11
0.5
0.5
3.2
3.2
1.6 10
1.6 – 10
2.8
2.8
4
4
5.6
5.6
8
8
11
11
16
16
0.5
0.5
2.3
2.3
1.6 7.5
1.6 – 7.5
4
4
5.6
5.6
8
8
11
11
16
16
0.5
0.5
1.6
1.6
1.6 5.2
1.6 – 5.2
5.6
5.6
8
8
11
11
16
16
0.5
0.5
1.1
1.1
1.6 3.6
1.6 – 3.6
8
8
11
11
16
16
0.5
0.5
0.8
0.8
1.6 2.6
1.6 – 2.6
Flash Sync Speed
Flash Sync Speed
The  ash will synchronize with the shutter at a shutter speed of 
/
 s.
Optional Flash Units
Optional Flash Units
The camera can be used with optional EF-20 and EF-42  ash units.
34
F
F
Macro Mode (Close-ups)
Macro Mode (Close-ups)
To focus at distances as close as 10 cm/4 in., press the command dial left (F) and
select F. If the optical view nder is on, the camera will automatically switch to the
electronic view nder (because of parallax, the camera will not focus at distances
of less than 80 cm/2.6 ft. when the optical view nder is used). To exit macro mode,
press the command dial left and select OFF.
OFF
OFF
P
R The LCD monitor and electronic view nder can be used to focus at short ranges when macro mode is not
selected, but the time needed to focus increases.
R The shadow cast by the lens may appear in photographs taken with the  ash at distances under 50 cm/19.6 in.
Turn the  ash o or increase the distance to the subject.
35
More on Photography
White Balance
White Balance
For natural colors, press the command dial down (WB) to display the following op-
tions, then rotate the dial or press it up or down to highlight an option that matches
the light source and press MENU/OK to select (for an explanation of “white balance,
see the Glossary on page 113).
WHITE BALANCE
Option
Option
Description
Description
AUTO
AUTO White balance adjusted automatically.
h
h
Measure a value for white balance (P 36).
k
k
Selecting this option displays a list of color
temperatures (
P 36); highlight a tempera-
ture and press MENU/OK.
i
i
For subjects in direct sunlight.
j
j
For subjects in the shade.
Option
Option
Description
Description
k
k
Use under daylight” uorescent lights.
l
l
Use under “warm white” uorescent lights.
m
m
Use under cool white uorescent lights.
n
n
Use under incandescent lighting.
g
g
Reduces the blue cast typically associated
with underwater lighting.
R White balance is adjusted for  ash lighting only in AUTO and g modes. Turn the  ash o using other white
balance options.
R Results vary with shooting conditions. Play pictures back after shooting to check colors.
36
White Balance
h
h
: Custom White Balance
: Custom White Balance
Choose h to adjust white balance for unusual lighting conditions. White balance measurement options will
be displayed; frame a white object so that it  lls the display and press the shutter button all the way down to
measure white balance.
If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value.
If “UNDER” is displayed, raise exposure compensation (P 30) and try again.
If “OVER” is displayed, lower exposure compensation and try again.
k
k
: Color Temperature
: Color Temperature
Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K). Light sources
with a color temperature close to that of direct sunlight appear white; light sources with a lower color tempera-
ture have a yellow or red cast, while those with a higher color temperature are tinged with blue. You can match
color temperature to the light source as shown in the following table, or choose options that di er sharply from
the color of the light source to make pictures “warmer or colder.
Choose for redder light sources
or “colder” pictures
Choose for bluer light sources
or “warmer” pictures
2,000 K
Candlelight
5,000 K
Direct sunlight
15,000 K
Blue sky
Sunset/sunrise Shade
37
More on Photography
1
Press the command dial up (DRIVE)
to display drive options, then rotate
the dial or press it up or down to
highlight I (TOP (RAW)). The options shown
below will be displayed.
TOP (RAW)
5
fps
3
fps
2
Press the command dial left or right to high-
light an option and press MENU/OK to select.
Option
Option
Description
Description
5 fps
5 fps
At shutter speeds faster than 
/
 s, the camera
takes pictures at 5 frames per second (fps).
3 fps
3 fps
At shutter speeds faster than 
/
 s, the camera will
take pictures at 3 fps.
3
Press the shutter button halfway to
focus.
4
Press the shutter button the rest
of the way down to start shooting.
Shooting ends when the shutter
button is released, after ten JPEG or
eight RAW pictures have been taken, or when
memory is full.
R Focus and exposure are determined by the  rst
frame in each series. The  ash turns o automati-
cally; the previously-selected  ash mode is restored
when burst shooting is turned o .
R Frame rate varies with shutter speed.
R Additional time may be required to record pictures
when shooting ends; to cancel recording and take
next pictures immediately, press DISP/BACK.
R If  le numbering reaches 999 before shooting is
complete, the remaining pictures will be recorded
to a new folder (P 82).
I
I
Continuous Shooting (Burst Mode)
Continuous Shooting (Burst Mode)
Capture motion in a series of pictures.
38
Bracketing
Bracketing
Automatically vary settings over a series of pictures.
1
Press the command dial up (DRIVE) to display drive options and rotate the dial or
press it up or down to highlight one of the following:
Option
Option
Description
Description
AE BKT
AE BKT
Press the command dial left or right to highlight a bracketing amount. Each time the
shutter button is pressed, the camera will take three shots at up to about 5 fps: one us-
ing the metered value for exposure, the second overexposed by the selected amount,
and the third underexposed by the same amount (regardless of the amount selected,
exposure will not exceed the limits of the exposure metering system).
ISO BKT
ISO BKT
Press the command dial left or right to highlight a bracketing amount. Each time the
shutter is released, the camera will take a picture at the current sensitivity (P 51) and
process it to create two additional copies, one with sensitivity raised and the other with
sensitivity lowered by the selected amount (regardless of the amount selected, sensitiv-
ity will not exceed ISO 6400 or fall below ISO 200).
FILM
FILM
SIMULATION
SIMULATION
BKT
BKT
Each time the shutter is released, the camera takes one shot and processes it to create
three copies with di erent  lm simulation settings (P 54): c PROVIA/STANDARD for
the  rst, d Velvia/VIVID for the second, and e ASTIA/SOFT for the third.
DYNAMIC
DYNAMIC
RANGE BKT
RANGE BKT
Each time the shutter button is pressed, the camera takes three shots with di erent
dynamic ranges (P 70): 100% for the  rst, 200% for the second, and 400% for the third.
The shots are taken at rates of up to about 5 fps. While dynamic range bracketing is in
e ect, sensitivity will be restricted to a minimum of ISO 800; the sensitivity previously in
e ect is restored when bracketing ends.
AE BKT
±
1
±
2
/
3
±
1
/
3
Press MENU/OK to select the highlighted option.
2
Take photographs.
39
More on Photography
Panoramas
Panoramas
Follow an on-screen guide to create a panorama.
1
Press the command dial up (DRIVE)
to display drive options. Rotate the
dial or press it up or down to high-
light r (MOTION PANORAMA) and press
MENU/OK.
MOTION PANORAMA
2
To select the angle through which
you will pan the camera while
shooting, press the command dial
left. Press the dial left or right to highlight an
angle and press MENU/OK.
120
120
SWITCH DEGREES OF ANGLE
MOTION PANORAMA
120
120 180
3
Press the command dial right to
view a choice of pan directions.
Press the dial it left or right to high-
light a pan direction and press MENU/OK.
SWITCH DIRECTION
FROM LEFT TO RIGHT
4
Press the shutter button all the way
down to start recording. There is
no need to keep the shutter button
pressed during recording.
40
Panoramas
5
Pan the camera in the direction shown by the
arrow. Shooting ends automatically when the
camera is panned to the end of the guides
and the panorama is complete.
120
120
ANGLE DIRECTION
R Shooting ends if the shutter button is pressed all
the way down during shooting. No panorama
will be recorded if the shutter button is pressed
before the camera has been panned through
120 °.
Q Panoramas are created from multiple frames; expo-
sure for the entire panorama is determined by the
rst frame. The camera may in some cases record an
greater or lesser angle than selected or be unable to
stitch the frames together perfectly. The last part of
the panorama may not be recorded if shooting ends
before the panorama is complete.
Q Shooting may be interrupted if the camera is panned
too quickly or too slowly. Panning the camera in a
direction other than that shown cancels shooting.
Q The desired results may not be achieved with mov-
ing subjects, subjects close to the camera, unvary-
ing subjects such as the sky or a  eld of grass, sub-
jects that are in constant motion, such as waves and
waterfalls, or subjects that undergo marked chang-
es in brightness. Panoramas may be blurred if the
subject is poorly lit.
41
More on Photography
Panoramas
The size of the completed panorama varies with
the angle and pan direction.
Angle
Angle
Pan direction
Pan direction
Size (W × H)
Size (W × H)
120°
120°
Horizontal
Horizontal
5,120 × 1,440/ 7.3 M
5,120 × 1,440/ 7.3 M
Vertical
Vertical
2,160 × 5,120/11.1 M
2,160 × 5,120/11.1 M
180°
180°
Horizontal
Horizontal
7,680 × 1,440/11.1 M
7,680 × 1,440/11.1 M
Vertical
Vertical
2,160 × 7,680/16.6 M
2,160 × 7,680/16.6 M
For Best Results
For Best Results
For best results, prop your elbows against your sides
and move the camera slowly in a small circle at a
steady speed, keeping the camera horizontal and
being careful only to pan in the direction shown by
the guides. Use a tripod for best results. If the desired
results are not achieved, try panning at a di erent
speed.
42
F
F
Recording High-De nition (HD) Movies
Recording High-De nition (HD) Movies
Record short high-de nition (1,280 × 720) movies at a frame rate of 24 fps. Sound is recorded in stereo
via the built-in microphone; during recording, do not cover the microphone or use the view nder se-
lector, which is located next to the microphone.
1
Press the command dial up (DRIVE)
to display drive options. Rotate the
dial or press it up or down to high-
light
F (MOVIE) and press MENU/OK.
MOVIE
Q If the optical view nder is on, the camera will au-
tomatically switch to the electronic view nder.
2
Press the shutter button all the way
down to start recording.
3
Press the shutter button all the way
down again to end recording. Re-
cording ends automatically after ten
minutes or when memory is full.
R Focus, exposure, and white balance are adjusted
automatically throughout recording. The color and
brightness of the image may vary from those dis-
played before recording begins.
R The indicator lamp lights while movies are being
recorded.
Q The microphone may pick up lens noise and other
sounds made by the camera during recording.
Q Vertical or horizontal streaks may appear in movies
containing very bright subjects. This is normal and
does not indicate a malfunction.
43
More on Photography
F Recording High-De nition (HD) Movies
Before Recording
Before Recording
Before recording, adjust aperture (P 26), white balance (P 35),  lm simulation (P 54), and exposure
compensation (P 30) and select a focus mode (P 48).
R To increase zoom by 3 × for a focal length equivalent to 105 mm (35 mm format), press the k button before
recording begins. Press n to cancel zoom.
Q Continuous AF is used when
AF-S is selected for focus mode.
Q Aperture control and manual focus are not available during recording.
44
h
h
Using the Self-Timer
Using the Self-Timer
Use the timer for self-portraits or to prevent blur caused by camera shake.
1
Press MENU/OK in shooting mode to display the shooting menu. Press
the command dial up or down to highlight B SELF-TIMER and
press MENU/OK.
SET
EXIT
P
F
3
:
2
200
OFF
SHOOTING MENU
DYNAMIC RANGE
ISO
SELF-TIMER
FILM SIMULATION
IMAGE SIZE
IMAGE QUALITY
2
Press the command dial up or down to highlight one of the following
options and press MENU/OK to select.
Option
Option
Description
Description
S
S
10 SEC
10 SEC
The shutter is released ten seconds after the shutter button is pressed. Use
for photographs in which you wish to appear yourself.
R
R
2 SEC
2 SEC
The shutter is released two seconds after the shutter button is pressed. Use
to reduce blur caused by the camera moving when the shutter button is
pressed.
OFF
OFF Self-timer o .
SET
SHOOTING MENU
P
F
3
:
2
200
OFF
SELF-TIMER
OFF
10
SEC
2
SEC
3
Press the shutter button halfway to focus.
Q Stand behind the camera when using the shutter button. Standing in
front of the lens can interfere with focus and exposure.
45
More on Photography
h Using the Self-Timer
4
Press the shutter button the rest of the way down to start the timer.
The display in the monitor shows the number of seconds remaining
until the shutter is released. To stop the timer before the picture is
taken, press DISP/BACK.
9
9
The self-timer lamp on the front of the camera will blink immediately
before the picture is taken. If the two-second timer is selected, the
self-timer lamp will blink as the timer counts down.
R The self-timer turns o automatically when the camera is turned o .
46
Focus/Exposure Lock
Focus/Exposure Lock
To compose photographs with o -center subjects:
1
Focus: Position the subject in the focus frame and press the shutter button half-
way to lock focus and exposure. Focus and exposure will remain locked while
the shutter button is pressed halfway (AF/AE lock).
P
2000 F5.6 200
R Depending on the option selected for v AE/AF-LOCK BUTTON in the setup menu (P 85), focus and/or
exposure can also be locked by pressing the AFL/AEL button; focus and/or exposure will remain locked even
if the shutter button is pressed. Choose AE LOCK ONLY to lock exposure but not focus, AF LOCK ONLY to
lock focus but not exposure, or AE/AF LOCK to lock both focus and exposure. In manual focus mode (P 48),
the camera will focus automatically with the AFL/AEL button.
2
Recompose: Keep the shutter button pressed halfway or keep the AFL/AEL button
pressed.
R If AE&AF ON/OFF SWITCH is selected for k AE/AF-LOCK MODE (P 85), focus and/or
exposure lock when the AFL/AEL button is pressed and remain locked until the button
is pressed again.
P
2000 F5.6 200
3
Shoot: Press the button all the way down.
P
2000 F5.6 200
47
More on Photography
Focus/Exposure Lock
Autofocus
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed
below.
Very shiny subjects such as mirrors or car bodies.
• Fast-moving subjects.
Subjects photographed through a window or other re ective object.
Dark subjects and subjects that absorb rather than re ect light, such as hair or fur.
Insubstantial subjects, such as smoke or  ame.
• Subjects that show little contrast with the background (for example, subjects in clothing that is the same color
as the background).
Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly contrasting elements).
48
Focus Mode
Focus Mode
Use the focus mode selector to choose how the camera focuses.
AF-S (Single AF): Focus locks while the shutter button is pressed halfway. Choose for
stationary subjects.
AF-C (Continuous AF): Focus is continually adjusted to re ect changes in the distance to
the subject even when the shutter button is not pressed halfway (note that this increases the drain
on the battery).
MF (Manual): Focus manually using the focus ring. Rotate the ring left to reduce the focus distance, right
to increase. The manual focus indicator indicates how closely the focus distance matches the dis-
tance to the subject in the focus brackets (the red bar indicates the focus distance, the white bar the
depth of  eld, or in other words the distance in front of and behind the focus point that appears to
be in focus); you can also check focus visually in the electronic view nder or LCD monitor. Choose for
manual control of focus or in situations in which the camera is unable to focus using autofocus (P 47).
Reduce focus
distance
Increase focus
distance
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10m
M
2000 F5. 6 200
Manual focus
mode icon
Manual focus
indicator
1.0 1.5 2.0 3.0 5
.
Focus distance
(red bar)
Depth of  eld
(white bar)
R Use the I FOCUS RING option in the setup menu (P 85) to reverse the direction of rotation of the focus ring.
R The camera will not focus if the focus ring is rotated past in nity.
R To focus using autofocus, press the AFL/AEL button. This can be used to quickly focus on a chosen subject in
manual focus mode.
R The camera can show focus distance in meters or feet. Use the M FOCUS SCALE UNITS option in the setup
menu (P 85) to choose the units used.
49
More on Photography
Focus Mode
Manual Focus
Manual Focus
If ON is selected for j FOCUS CHECK in the setup menu (P 85),
pressing the center of the command control magni es the view in
the electronic view nder or LCD monitor for precise focus. To scroll
to other areas of the frame, press the AF button and rotate the com-
mand dial.
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10m
M
2000 F5. 6 200
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10m
M
2000 F5. 6 200
50
Focus Frame Selection
Focus Frame Selection
When t AREA is selected for
F
F AF MODE in the shooting
menu and AF-S is selected for focus mode, the electronic view-
nder and LCD monitor o er a choice of 49 focus points and the
optical view nder a choice of 25, allowing photographs to be
composed with the main subject positioned almost anywhere in
the frame. To position the focus frame, press the AF button and
use the command dial (the focus frame can be returned to the
center by pressing MENU/OK).
Q When you switch to the optical view nder, the camera will select the
focus frame closest to that selected in the electronic view nder or
LCD monitor.
+
2000 F5. 6 200
Focus frame
Focus point
OVF EVF/LCD
When framing pictures in the electronic view nder or LCD moni-
tor, you can choose the size of the focus frame for AF-S by press-
ing the AF button and pressing the command control left or
right. Press the control left to reduce the frame by up to 50%,
right to enlarge it by up to 150%. The setting takes e ect when
you release the AF button.
+
2000 F5. 6 200
EVF/LCD
51
More on Photography
Sensitivity
Sensitivity
“Sensitivity refers to the cameras sensitivity to light. Choose from values between L (100) (ISO 100)
and H (12800) (ISO 12800). Higher values can be used to reduce blur when lighting is poor, while low-
er values allow slower shutter speeds or wider apertures in bright light; note, however, that mottling
may appear in pictures taken at high sensitivities, particularly at H (12800), while choosing L (100)
reduces dynamic range. Values of from ISO 200 to ISO 6400 are recommended in most situations.
1
Press MENU/OK in shooting mode to display the shooting menu. Press
the command dial up or down to highlight N ISO and press MENU/
OK.
R At default settings, ISO options can also be displayed by pressing the Fn
button.
SET
EXIT
P
F
3
:
2
200
OFF
SHOOTING MENU
DYNAMIC RANGE
ISO
SELF-TIMER
FILM SIMULATION
IMAGE SIZE
IMAGE QUALITY
2
Press the command dial up or down to highlight the desired option
and press MENU/OK to select.
P
2000 F5. 6 200
SET
SHOOTING MENU
P
F
3
:
2
ISO
200
OFF
320
400
500
250
200
L
(
100
)
R Sensitivity is not reset when the camera is turned o .
R Sensitivities of L (100) and H (12800) are respectively reset to ISO 200 and 6400 when RAW, FINE+RAW,
or NORMAL+RAW is selected for image quality (P 56, 70). For more information on the settings available with
L (100) and H (12800), see page 120.
R If ON is selected for N ISO AUTO CONTROL in the setup menu (P 84), the camera will automatically adjust
sensitivity if optimal exposure can not be achieved at current settings. The currently selected value is shown
until the shutter button is pressed halfway, when the camera shows the adjusted value.
52
Metering
Metering
To choose how the camera meters exposure, press the AE button
and rotate the command dial (you can also select the metering
method by pressing the AE button and pressing the command
control left or right). The following options are available:
Mode
Mode
Description
Description
o
o
(MULTI)
(MULTI)
The camera instantly determines exposure based on an analysis of
composition, color, and brightness distribution. Recommended in
most situations.
p
p
(SPOT)
(SPOT)
The camera meters lighting conditions in an area at the center of the
frame equivalent to 2% of the total. Recommended when the back-
ground is much brighter or darker than the main subject; due to paral-
lax, not recommended when pictures are framed in the optical view-
nder.
q
q
(AVERAGE)
(AVERAGE)
Exposure is set to the average for the entire frame. Provides consistent
exposure across multiple shots with the same lighting, and is particu-
larly e ective for landscapes and portraits of subjects dressed in black
or white.
+
PHOTOMETRY
MULTI
OVF EVF/LCD
The setting takes e ect when you release the AE button.
53
More on Photography
The Fn Button
The Fn Button
The role played by the Fn button can be selected using the F Fn
BUTTON option in the setup menu (P 83). The options available include
depth-of- eld preview (P 26), the self-timer (P 44), sensitivity (P 51),
image size (P 69), image quality (P 70), dynamic range (P 70), lm
simulation (P 54), ND  lter (P 57), AF mode (P 71), movie recording
(P 42), and custom settings (P 55).
R The F Fn BUTTON menu can also be displayed by pressing and holding the Fn button.
54
Film Simulation
Film Simulation
Simulate the e ects of di erent kinds of  lm, including black-and-white (with or without color  lters).
1
Press MENU/OK in shooting mode to display the shooting menu. Press
the command dial up or down to highlight P FILM SIMULATION
and press MENU/OK.
SET
EXIT
P
F
3
:
2
200
OFF
SHOOTING MENU
DYNAMIC RANGE
ISO
SELF-TIMER
FILM SIMULATION
IMAGE SIZE
IMAGE QUALITY
2
Press the command dial up or down to highlight one of the following options and press MENU/OK
to select.
Option
Option
Description
Description
c
c
(PROVIA/STANDARD)
(PROVIA/STANDARD)
Standard color reproduction. Suited to a wide range of subjects, from portraits to landscapes.
=
=
(Velvia/VIVD)
(Velvia/VIVD)
A high-contrast palette of saturated colors, suited to nature photos.
>
>
(ASTIA/SOFT)
(ASTIA/SOFT)
A soft-toned palette of less saturated colors.
;
;
(MONOCHROME)
(MONOCHROME)
Take pictures in standard black and white.
e
e
(MONOCHROME + Ye FILTER)
(MONOCHROME + Ye FILTER)
Take black-and-white pictures with slightly increased contrast. This setting also slightly tones
down the brightness of the sky.
d
d
(MONOCHROME + R FILTER)
(MONOCHROME + R FILTER)
Take black-and-white pictures with increased contrast. This setting also tones down the bright-
ness of the sky.
f
f
(MONOCHROME + G FILTER)
(MONOCHROME + G FILTER)
Soften skin tones in black-and-white portraits
f
f
(SEPIA)
(SEPIA)
Take pictures in sepia.
R Film simulation options can be combined with tone and sharpness settings (P 71).
55
More on Photography
Saving Settings
Saving Settings
Save up to three sets of custom camera settings for commonly-encountered situations. Saved settings
can be recalled using the u SELECT CUSTOM SETTING option in the shooting menu.
1
Press MENU/OK in shooting mode to display the shooting menu. Press
the command dial up or down to highlight K EDIT/SAVE CUSTOM
SETTING and press MENU/OK.
SET
SHOOTING MENU
EXIT
P
AF MODE
FLASH
EXTERNAL FLASH
±
0
NOISE REDUCTION
STD
OFF
EDIT/SAVE CUSTOM SETTING
SELECT CUSTOM SETTING
2
Highlight a custom settings bank and press MENU/OK to select. Adjust
the following as desired and press DISP/BACK when adjustments are
complete: N ISO, U DYNAMIC RANGE, P FILM SIMULATION,
D WHITE BALANCE, f COLOR, r HIGHLIGHT TONE, s SHADOW
TONE, H SHARPNESS, and h NOISE REDUCTION.
FILM SIMULATION
WHITE BALANCE
ISO
DYNAMIC RANGE
200
AUTO
MID
EXIT
CUSTOM
1
COLOR
SAVE CURRENT SETTINGS
R To replace the settings in the selected bank with the settings currently selected with the camera, select
K SAVE CURRENT SETTINGS and press MENU/OK.
3
A con rmation dialog will be displayed; highlight OK and press MENU/
OK.
OK
SAVE CUSTOM SETTING
CUSTOM
1
SET OK?
OK
CANCEL
56
The RAW Button
The RAW Button
Press the RAW button toggle RAW image quality on or o for a single
shot. If a JPEG option is currently selected for image quality, pressing
the RAW button temporarily selects the equivalent JPEG+RAW option.
If a JPEG+RAW option is currently selected, pressing the RAW button
temporarily selects the equivalent JPEG option, while if RAW is selected,
pressing the RAW button temporarily selects FINE. Taking a picture or pressing the RAW button again
restores the previous setting.
R RAW images record raw, unprocessed data from the camera image sensor. JPEG copies of RAW images can
be created using the j RAW CONVERSION option in the playback menu, or RAW images can be viewed on
a computer using the RAW File Converter application that is installed with the software on the supplied CD
(P 94, 96).
R Sensitivities of L (100) and H (12800) are not available when RAW image quality is on (P 51).
R Control lock (P 4) disables the RAW button. To enable the RAW button, press MENU/OK until the X icon clears
from the display.
57
More on Photography
The ND Filter
The ND Filter
The camera is equipped with a Neutral Density (ND)  lter that reduces exposure by the equivalent of
3 EV. This allows slower shutter speeds or wider apertures to be used with brightly lit subjects, making
it possible to blur motion or soften background details without risk of overexposure.
1
Press MENU/OK in shooting mode to display the shooting menu. Press
the command dial up or down to highlight t ND FILTER and press
MENU/OK.
SET
SHOOTING MENU
P
COLOR
HIGHLIGHT TONE
SHADOW TONE
STD
STD
MID
WB SHIFT
ND FILTER
OFF
EXIT
STD
SHARPNESS
2
Press the command dial up or down to highlight ON and press MENU/OK to select.
58
Viewing Pictures
Viewing Pictures
Viewing Pictures Full Frame
Viewing Pictures Full Frame
Pictures can be viewed in the electronic view nder or LCD monitor. When taking important pictures,
take a test shot and check the results.
To view pictures full frame, press
a.
100-0001
100-0001
1 /1000 F4. 5
2
-
1
3
200
Additional pictures can be viewed by
pressing the command dial left or right.
Press the dial right to view pictures in
the order recorded, left to view pictures in reverse
order. Keep the command dial pressed to scroll
rapidly to the desired frame.
R Pictures taken using other cameras are indicated by
a m (“gift image”) icon during playback.
Favorites: Rating Pictures
Favorites: Rating Pictures
To rate the current picture, press DISP/BACK and press
the command dial up and down to select from zero
to  ve stars.
Deleting Pictures
Deleting Pictures
To delete the current picture, press the
command dial up (
b). The following dia-
log will be displayed.
ERASE OK?
OK
CANCEL
SET
To delete the picture, highlight OK and
press MENU/OK. To exit without deleting
the picture, highlight CANCEL and press
MENU/OK.
R Pictures can also be deleted from the playback
menu (P 67).
Creating JPEG Copies of RAW Pictures
Creating JPEG Copies of RAW Pictures
Pressing the RAW button during playback displays
RAW conversion options (P 68).
59
Viewing Pictures
Viewing Pictures Full Frame
Photo Information
Photo Information
Photo information can be viewed
by pressing the command con-
trol right.
D-RANGE
COLOR
HIGH LIGHT TONE
SHADOW TONE
SHARPNESS
FILM SIM.
WHITE BALANCE
: AUTO
: STD
: STD
: STD
: STD
: PROVIA
: AUTO
Press the control left or right to view additional in-
formation.
R The active focus point is shown by a “+” icon.
Zooming in on the Focus Point
Zooming in on the Focus Point
Press the center of the com-
mand control to zoom in on the
focus point. Press the center of
the command control again to
return to full-frame playback.
Playback Zoom
Playback Zoom
Press k to zoom in on the current picture, n to
zoom out. When the picture is zoomed in, the
command dial can be used to view areas of the
image not currently visible in the display. Press
DISP/BACK or MENU/OK to exit zoom.
Zoom indicator
Navigation window
shows portion of image
currently displayed
R The maximum zoom ratio varies with image size
(P 69). Playback zoom is not available with cropped
or resized copies saved at a size of a.
60
Viewing Pictures Full Frame
Multi-Frame Playback
Multi-Frame Playback
To change the number of images displayed, press n when a picture is displayed full frame.
Press n to view
more images.
100-0001
100-0001
Press k to view
fewer images.
Use the command dial to highlight images and press MENU/OK to view the highlighted image full frame.
In the nine- and hundred-frame displays, press the command dial up or down to view more pictures.
61
Viewing Pictures
Viewing Movies
Viewing Movies
During playback, movies are displayed as shown at right. The following operations
can be performed while a movie is displayed:
Operation
Operation
Description
Description
Start/pause playback
Start/pause playback
Press the command dial down to start playback. Press again to pause. While playback
is paused, you can press the selector left or right to rewind or advance one frame
at a time.
End playback
End playback Press the command dial up to end playback.
Adjust speed
Adjust speed
Press the command dial left or right to adjust playback speed during playback. Speed
is shown by the number of arrows (M or N).
Adjust volume
Adjust volume
Press MENU/OK to pause playback and display volume controls. Press the command
dial up or down to adjust the volume; press MENU/OK again to resume playback.
Movie icon
100-006
100-006
PLAY
Progress is shown in the display during playback.
Q Do not cover the speaker during playback.
Q Sound is not played back in silent mode.
Progress bar
STOP PAUSE
15
s
15
s
62
Image Search
Image Search
Follow the steps below to search for pictures.
1
Press MENU/OK during playback to display the playback menu. Press the command dial up or down
to highlight b IMAGE SEARCH and press MENU/OK.
2
Highlight an option and press MENU/OK.
Option
Option
Description
Description
BY DATE Search by date.
BY FACE Search for pictures that include faces.
BY
I FAVORITES Search by rating.
BY TYPE OF DATA Find all still pictures, all movies, all pictures taken in burst mode, or all RAW pictures.
BY UPLOAD MARK Find all pictures selected for upload to a speci ed destination.
3
Select a search condition. Only pictures that match the search condition will
be displayed. To delete or protect selected pictures or to view the selected
pictures in a slide show, press MENU/OK and choose from the options at right.
4
To end the search, select EXIT SEARCH.
Option
Option
See page
See page
A
A
ERASE
ERASE
67
67
D
D
PROTECT
PROTECT
76
76
I
I
SLIDE SHOW
SLIDE SHOW
75
75
63
Viewing Pictures
m
m
PhotoBook Assist
PhotoBook Assist
Create books from your favorite photos.
Creating a PhotoBook
Creating a PhotoBook
1
Select NEW BOOK for m PHOTOBOOK AS-
SIST in the playback menu (P 73) and choose
from the following options:
SELECT FROM ALL: Choose from all available
pictures.
SELECT BY IMAGE SEARCH: Choose from pictures
matching selected search conditions (P
62).
R Neither photographs a or smaller nor movies
can be selected for photobooks.
2
Scroll through the images and press the com-
mand dial up to select or deselect. To display
the current image on the cover, press the
command dial down. Press MENU/OK to exit
when the book is complete.
R The  rst picture selected becomes the cover im-
age. Press the command dial down to select a
di erent image for the cover.
3
Select COMPLETE PHOTOBOOK (to select all
photos or all photos matching the speci ed
search conditions for the book, choose SE-
LECT ALL). The new book will be added to
the list in the photobook assist menu.
Q Books can contain up to 300 pictures.
Q Books that contain no photos are automatically de-
leted.
64
m PhotoBook Assist
Viewing Photobooks
Viewing Photobooks
Highlight a book in the photobook assist menu
and press MENU/OK to display the book, then press
the command dial left or right to scroll through
the pictures.
Editing and Deleting Photobooks
Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The
following options will be displayed; select the
desired option and follow the on-screen instruc-
tions.
EDIT: Edit the book as described in “Creating a
PhotoBook” (P 63).
ERASE: Delete the book.
Photobooks
Photobooks
Photobooks can be copied to a computer using the supplied MyFinePix Studio software.
65
Viewing Pictures
Viewing Panoramas
Viewing Panoramas
If you press the command dial down when a panorama is
displayed full frame, the camera will play back the picture
from left to right or from bottom to top. Press the command
dial down to pause and resume playback, or press the dial
up to return to full-frame playback. To rewind or advance
one frame at a time, press the command dial left or right while playback is paused.
PLAY
STOP PAUSE
66
Viewing Pictures Taken in a Single Burst
Viewing Pictures Taken in a Single Burst
When a picture taken in continuous shooting mode is dis-
played full frame, the  rst picture in the current burst can be
viewed by pressing the command dial down (burst mode
playback). Press the dial right to view pictures in the order
recorded, left to view pictures in reverse order. Keep the dial
pressed to scroll rapidly to the desired frame. To exit, press
DISP/BACK.
Position in burst/total number
of pictures in burst
PLAY CONTINUOUS SHOTS
PLAY NORMAL
1/10
First picture in burst
R Pressing the command dial right when the last picture in the burst is displayed displays the  rst picture in the
burst; similarly, pressing the dial left when the  rst picture is displayed displays the last picture.
R Deletion (P 58), rotation (P 77), protect (P 76), and copy (P 78) operations applied during burst mode
playback apply only to the current picture. In contrast, if these operations are performed when a picture taken
in continuous shooting mode is displayed in single-frame playback, all images in the same burst will be af-
fected.
Bursts That Cross Folders
Bursts That Cross Folders
If a single burst is spread across multiple folders, the pictures in each folder will be treated as separate bursts.
Viewing Photo Information
Viewing Photo Information
To view photo information for a picture taken in continuous shooting mode, display it in burst mode playback.
Photo information for pictures taken in continuous shooting mode can not be viewed during single-frame
playback.
67
Viewing Pictures
x
x
Deleting Pictures
Deleting Pictures
The A ERASE option in the playback menu can be used to delete individual pictures, multiple select-
ed pictures, or all pictures. Note that deleted pictures can not be recovered. Copy important pictures to
a computer or other storage device before proceeding.
Press MENU/OK during playback to display the playback menu, then press the com-
mand dial up or down to highlight
A ERASE and press right to display the follow-
ing options. Press the dial up or down to highlight an option and press MENU/OK to
select.
SET
PLAYBACK MENU
ERASE
IMAGE SEARCH
SLIDE SHOW
MARK FOR UPLOAD TO
RAW CONVERSION
PHOTOBOOK ASSIST
FRAME
SELECTED FRAMES
ALL FRAMES
BACK
Option
Option
Description
Description
FRAME
FRAME
Press the command dial left or right through pictures and press MENU/OK to delete the current picture (a con-
rmation dialog is not displayed)
SELECTED FRAMES
SELECTED FRAMES
Highlight pictures and press MENU/OK to select or deselect (pictures that in a photobook or print order are
shown by S). When the operation is complete, press DISP/BACK to display a con rmation dialog, then high-
light OK and press MENU/OK.
ALL FRAMES
ALL FRAMES
A con rmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures.
Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed can not be
recovered.
R When a memory card is inserted, pictures will be deleted from the memory card; otherwise, pictures will be
deleted from internal memory.
R Protected pictures can not be deleted. Remove protection from any pictures you wish to delete (P 76).
R If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete
the pictures.
68
Creating JPEG Copies of RAW Pictures
Creating JPEG Copies of RAW Pictures
RAW pictures store information on camera settings separately from the data captured by the camera
image sensor. Using the j RAW CONVERSION option in the playback menu, you can create JPEG
copies of RAW pictures using di erent options for the settings listed below. The original image data are
una ected, allowing a single RAW image to be processed in a multitude of di erent ways.
1
Press MENU/OK during playback to display the
playback menu, then press the command dial
up or down to highlight j RAW CONVER-
SION and press MENU/OK to display the set-
tings listed in the table at right.
2
Press the command dial up
or down to highlight a set-
ting and press the dial right
to select. Press the dial up
or down to highlight the
desired option and press MENU/OK to select
and return to the settings list. Repeat this step
to adjust additional settings.
3
Press the RAW button to
preview the JPEG copy.
Press MENU/OK to save the
copy or press DISP/BACK to
return to Step 2.
Setting
Setting
Description
Description
REFLECT
SHOOTING COND.
Create a JPEG copy using the settings in ef-
fect at the time the photo was taken.
PUSH/PULL
PROCESSING
Adjust exposure by –1 EV to +3 EV in incre-
ments of 
/
 EV (P 30).
DYNAMIC RANGE
Enhance details in highlights for natural con-
trast (
P 70).
FILM SIMULATION
Simulate the e ects of di erent types of  lm
(
P 54).
WHITE BALANCE Adjust white balance (
P 35).
WB SHIFT Fine-tune white balance (
P 70).
COLOR Adjust color density (
P 70).
SHARPNESS Sharpen or soften outlines (
P 71).
NOISE REDUCTION Process the copy to reduce mottling (
P 71).
HIGHLIGHT TONE Adjust highlights (
P 71).
SHADOW TONE Adjust shadows (
P 71).
COLOR SPACE
Choose the color space used for color repro-
duction (
P 86).
FILM SIMULATION
WHITE BALANCE
REFLECT SHOOTING COND.
WB SHIFT
PUSH/PULL PROCESSING
DYNAMIC RANGE
RAW CONVERSION
CREATE CANCEL
SET CANCEL
69
Menus
Menus
Menus
Using the Menus: Shooting Mode
Using the Menus: Shooting Mode
The shooting menu is used to adjust settings for a wide range of shooting condi-
tions. To display the shooting menu, press MENU/OK in shooting mode. Highlight
items and press the command dial right to view options, then highlight an option
and press MENU/OK. Press DISP/BACK to exit when settings are complete.
SET
EXIT
P
F
3
:
2
200
OFF
SHOOTING MENU
DYNAMIC RANGE
ISO
SELF-TIMER
FILM SIMULATION
IMAGE SIZE
IMAGE QUALITY
Shooting Menu Options
Shooting Menu Options
B
B
SELF-TIMER
SELF-TIMER
(
(
defaults to
defaults to
OFF)
OFF)
Take pictures with the self-timer (P 44).
N
N
ISO
ISO
(
(
defaults to
defaults to
200)
200)
Control the cameras sensitivity to light (P 51).
O
O
IMAGE SIZE
IMAGE SIZE
(
(
defaults to
defaults to
O
O
3 : 2)
3 : 2)
Choose the size and aspect ratio at which still pictures are recorded.
Aspect Ratio
Aspect Ratio
Pictures with an aspect ratio of 3 : 2 have the same proportions as a frame of 35 mm  lm, while
Pictures with an aspect ratio of 3 : 2 have the same proportions as a frame of 35 mm  lm, while
an aspect ratio of 16 : 9 is suited to display on
an aspect ratio of 16 : 9 is suited to display on
H
H
igh
igh
D
D
e nition (HD) devices.
e nition (HD) devices.
O IMAGE SIZE is not reset when the camera is turned o or another shooting mode is selected.
Option
Option
Prints at sizes up to
Prints at sizes up to
O
3
:
2
36 × 24 cm (14 × 9.5 in.)
O
16
:
9
36 × 20 cm (14 × 8 in.)
P
3
:
2
26 × 17 cm (10 × 7 in.)
P
16
:
9
26 × 15 cm (10 × 6 in.)
Q
3
:
2
18 × 12 cm (7.5 × 5 in.)
Q
16
:
9
17 × 9 cm (7 × 3.5 in.)
70
Using the Menus: Shooting Mode
T
T
IMAGE QUALITY
IMAGE QUALITY
(
(
defaults to
defaults to
FINE)
FINE)
Choose a  le format and compression ratio. Select FINE or NORMAL to record JPEG images, RAW to record RAW images, or
FINE+RAW or NORMAL+RAW to record both JPEG and RAW images. FINE and FINE+RAW use lower JPEG compression ratios
for higher-quality JPEG images, while NORMAL and NORMAL+RAW user higher JPEG compression ratios to increase the num-
ber of images that can be stored.
U
U
DYNAMIC RANGE
DYNAMIC RANGE
(
(
defaults to
defaults to
A
A
)
)
Control contrast. Choose lower values to increase contrast when shooting indoors or under overcast skies, higher values to
reduce loss of detail in highlights and shadows when photographing high-contrast scenes. Higher values are recommended
for scenes that include both sunlight and deep shade, for such high-contrast subjects as sunlight on water, brightly-lit autumn
leaves, and portraits taken against a blue sky, and for white objects or people wearing white; note, however, that mottling may
appear in pictures taken at higher values.
R If AUTO is selected, shutter speed and aperture will be displayed when the shutter button is pressed halfway.
R
R
B
B 200% is available at sensitivities of ISO 400 and above,
C
C 400% at sensitivities of ISO 800 and above.
P
P
FILM SIMULATION
FILM SIMULATION
(
(
defaults to
defaults to
<
<
)
)
Simulate the e ects of di erent types of  lm (P 54).
t
t
ND FILTER
ND FILTER
(
(
defaults to
defaults to
OFF)
OFF)
Turn the ND  lter on or o (P 57).
d
d
WB SHIFT
WB SHIFT
Press the command dial up or down to  ne-tune white balance on the selected color axis (Red–Cyan or
Blue–Ye llow) by +9 to –9 in increments of one. Press MENU/OK to select.
RB
Cy Ye
0 0
CANCELSET
WB SHIFT
Red
Cyan
Blue
Yellow
f
f
COLOR
COLOR
(
(
defaults to
defaults to
MID)
MID)
Adjust color density.
71
Menus
Using the Menus: Shooting Mode
H
H
SHARPNESS
SHARPNESS
(
(
defaults to
defaults to
STANDARD)
STANDARD)
Sharpen or soften outlines.
r
r
HIGHLIGHT TONE
HIGHLIGHT TONE
(
(
defaults to
defaults to
STANDARD)
STANDARD)
Adjust the appearance of highlights.
s
s
SHADOW TONE
SHADOW TONE
(
(
defaults to
defaults to
STANDARD)
STANDARD)
Adjust the appearance of shadows.
h
h
NOISE REDUCTION
NOISE REDUCTION
(
(
defaults to
defaults to
STANDARD)
STANDARD)
Reduce noise in pictures taken at high sensitivities.
F
F
AF MODE
AF MODE
(
(
defaults to
defaults to
t
t
AREA)
AREA)
Choose how the camera selects the focus area when in AF-S focus mode.
s MULTI: When the shutter button is pressed halfway, the camera detects high-contrast subjects and selects the focus area
automatically.
t AREA: Choose the focus area manually (P 50).
I
I
FLASH
FLASH
(
(
defaults to
defaults to
±0)
±0)
Adjust  ash brightness. Choose from values between +
/
EV and –
/
EV. Note that the desired results may not be achieved
depending on shooting conditions and the distance to the subject.
g
g
EXTERNAL FLASH
EXTERNAL FLASH
(
(
defaults to
defaults to
OFF)
OFF)
Choose ON when using an optional third-party  ash unit mounted on the camera hot shoe, or ON (COMMANDER) to control
optional remote  ash units using the cameras built-in  ash. No adjustment is required with optional FUJIFILM  ash units.
R See the documentation provided with the  ash unit for details. The camera can be used with  ash units that provide aperture
adjustment, external metering, and sensitivity control. Some  ash units that are designed speci cally for other cameras can
not be used.
72
Using the Menus: Shooting Mode
u
u
SELECT CUSTOM SETTING
SELECT CUSTOM SETTING
Recall settings saved with K EDIT/SAVE CUSTOM SETTING.
K
K
EDIT/SAVE CUSTOM SETTING
EDIT/SAVE CUSTOM SETTING
Save settings (P 55).
v
v
DISP. CUSTOM SETTING
DISP. CUSTOM SETTING
Choose the items displayed in the optical view nder or in the electronic view nder and LCD monitor (P 20). The following items
can be displayed: framing grid (you can also select the grid type as described on page 86), virtual horizon, autofocus distance (fo-
cus distance is always displayed in manual focus mode), histogram, exposure (shutter speed, aperture, and sensitivity), exposure
compensation/exposure indicator, metering,  ash mode, white balance,  lm simulation, dynamic range, number of exposures
remaining, image size and quality, and battery level. See pages 6 7 for the locations of these items in the displays.
1
Highlight OVF or EVF/LCD and press MENU/OK.
2
Press the command dial up or down to highlight items and press MENU/OK to select or deselect. Press DISP/BACK to exit when
settings are complete.
Virtual Horizon
Virtual Horizon
Selecting
Selecting
ELECTRONIC LEVEL
ELECTRONIC LEVEL
displays a virtual horizon. The camera is level when the two lines over-
displays a virtual horizon. The camera is level when the two lines over-
lap.
lap.
R The virtual horizon may not be displayed if the camera lens is pointed up or down.
P
73
Menus
Using the Menus: Playback Mode
Using the Menus: Playback Mode
To display the playback menu, press MENU/OK in playback mode. Highlight items
and press the command dial right to view options, then highlight an option and
press MENU/OK. Press DISP/BACK to exit when settings are complete.
SET
EXIT
ERASE
IMAGE SEARCH
SLIDE SHOW
MARK FOR UPLOAD TO
RAW CONVERSION
PHOTOBOOK ASSIST
PLAYBACK MENU
Playback Menu Options
Playback Menu Options
m
m
PHOTOBOOK ASSIT
PHOTOBOOK ASSIT
Create books from your favorite photos (P 63).
t
t
IMAGE SEARCH
IMAGE SEARCH
Search for pictures (P 62).
A
A
ERASE
ERASE
Delete all or selected pictures (P 67).
74
Using the Menus: Playback Mode
j
j
MARK FOR UPLOAD TO
MARK FOR UPLOAD TO
Select pictures for upload to YouTube or Facebook using MyFinePix Studio (Windows only).
1
Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos and movies for upload to Facebook.
2
Press the command dial left or right to display pictures and press MENU/OK to select or deselect. Press DISP/BACK to exit when
all the desired pictures are selected.
R Only movies can be selected for upload to YouTube.
R During playback, selected pictures are marked with j YouTube or j FACEBOOK indicators.
R Choose RESET ALL to deselect all pictures. If the number of pictures a ected is very large, a message will be displayed while
the operation is in progress. Press DISP/BACK to exit before the operation is complete.
Uploading Pictures (Windows Only)
Uploading Pictures (Windows Only)
Selected pictures can be uploaded using the
Selected pictures can be uploaded using the
YouTube/Facebook Upload
YouTube/Facebook Upload
op-
op-
tion in MyFinePix Studio. For information on installing MyFinePix Studio and
tion in MyFinePix Studio. For information on installing MyFinePix Studio and
connecting the camera to a computer, see “Viewing Pictures on a Computer
connecting the camera to a computer, see Viewing Pictures on a Computer”
(
(
P
P
94).
94).
Select with camera
Upload from computer
75
Menus
Using the Menus: Playback Mode
I
I
SLIDE SHOW
SLIDE SHOW
View pictures in an automated slide show. Choose the type of show and press MENU/OK to start. Press DISP/BACK at any time dur-
ing the show to view on-screen help. The show can be ended at any time by pressing MENU/OK.
Option
Option
Description
Description
NORMAL
NORMAL
Press the command dial left or right to go back or skip ahead one frame. Select FADE-IN for fade transitions be-
tween frames.
FADE-IN
FADE-IN
NORMAL
NORMAL
g
g
As above, except that camera automatically zooms in on faces.
FADE-IN
FADE-IN
g
g
MULTIPLE
MULTIPLE Display several pictures at once.
R The camera will not turn o automatically while a slide show is in progress.
j
j
RAW CONVERSION
RAW CONVERSION
Create JPEG copies of RAW pictures (P 68).
B
B
RED EYE REMOVAL
RED EYE REMOVAL
Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create
a copy with reduced red-eye.
1
Display the desired picture.
2
Select B RED EYE REMOVAL in the playback menu.
3
Press MENU/OK.
R Red eye may not be removed if the camera is unable to detect a face or the face is in pro le. Results may di er depending on
the scene. Red eye can not be removed from pictures that have already been processed using red-eye removal or pictures
created with other devices.
R The amount of time needed to process the image varies with the number of faces detected.
R Copies created with B RED EYE REMOVAL are indicated by a e icon during playback.
R Red eye removal can not be performed on RAW images.
76
Using the Menus: Playback Mode
D
D
PROTECT
PROTECT
Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK.
FRAME: Protect selected pictures. Press the command dial left or right to view pictures and press MENU/OK to select or deselect.
Press DISP/BACK when the operation is complete.
SET ALL: Protect all pictures.
RESET ALL: Remove protection from all pictures.
Q Protected pictures will be deleted when the memory card or internal memory is formatted (P 81).
G
G
CROP
CROP
Create a cropped copy of the current picture.
1
Display the desired picture.
2
Select G CROP in the playback menu.
3
Use the k and n buttons to zoom in and out and press the command dial up, down, left, or right to scroll the picture until
the desired portion is displayed.
4
Press MENU/OK to display a con rmation dialog.
5
Press MENU/OK again to save the cropped copy to a separate  le.
R Larger crops produce larger copies; all copies have an aspect ratio of 3 : 2. If the size of the  nal copy will be a, OK will be
displayed in yellow.
77
Menus
Using the Menus: Playback Mode
e
e
RESIZE
RESIZE
Create a cropped copy of the current picture.
1
Display the desired picture.
2
Select e RESIZE in the playback menu.
3
Highlight a size and press MENU/OK to display a con rmation dialog.
4
Press MENU/OK again to save the resized copy to a separate  le.
R The sizes available vary with the size of the original image.
C
C
IMAGE ROTATE
IMAGE ROTATE
Rotate pictures.
1
Display the desired picture.
2
Select C IMAGE ROTATE in the playback menu.
3
Press the command dial down to rotate the picture 90 ° clockwise, up to rotate it 90 ° counterclockwise.
4
Press MENU/OK. The picture automatically be displayed in the selected orientation whenever it is played back on the camera.
R Protected pictures can not be rotated. Remove protection before rotating pictures (P 76).
R The camera may not be able to rotate pictures created with other devices.
R Pictures taken with m AUTOROTATE PB are automatically displayed in the correct orientation during playback (P 87).
78
Using the Menus: Playback Mode
E
E
COPY
COPY
Copy pictures between internal memory and a memory card.
1
Highlight one of the following options and press the command dial right.
a INTERNAL MEMORY y b CARD: Copy pictures from internal memory to a memory card.
b CARD y a INTERNAL MEMORY: Copy pictures from a memory card to internal memory.
2
Highlight one of the following options and press MENU/OK.
FRAME: Copy selected pictures. Press the command dial left or right to view pictures and press MENU/OK to copy the current
picture.
ALL FRAMES: Copy all pictures.
R Copying ends when the destination is full.
R DPOF print information is not copied (P 91).
K
K
PRINT ORDER (DPOF)
PRINT ORDER (DPOF)
Select pictures for printing on DPOF- and PictBridge-compatible devices (P 90, 91).
J
J
DISP ASPECT
DISP ASPECT
Choose how High De nition (HD) devices display pictures with an aspect ratio of 3 : 2
(this option is available only when an HDMI cable is connected). Select 16 : 9 to display
the image so that it  lls the screen with its top and bottom cropped out, 3 : 2 to display
the entire image with black bands at either side.
3:2
16:9
16 : 9
16 : 9
3 : 2
3 : 2
79
Menus
The Setup Menu
The Setup Menu
Using the Setup Menu
Using the Setup Menu
1
Display the setup menu.
1.1 Press MENU/OK to display the menu for the current mode.
1.2 Press the command dial left to highlight the tab for the current menu.
1.3 Press the command dial down to highlight X.
SET
OFF
SET-UP
DATE/TIME
TIME DIFFERENCE
ENGLISH
SILENT MODE
RESET
FORMAT
EXIT
Tab
1.4 Press the command dial right to place the cursor in the setup menu.
2
Adjust settings.
Highlight items and press the command dial right to view options, then highlight an option and
press MENU/OK. Press DISP/BACK to exit when settings are complete.
80
The Setup Menu
Setup Menu Options
Setup Menu Options
F
F
DATE/TIME
DATE/TIME
Set the camera clock (P 17).
N
N
TIME DIFFERENCE
TIME DIFFERENCE
(
(
defaults to
defaults to
h
h
)
)
Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the
di erence between local time and your home time zone:
1
Highlight g LOCAL and press the command dial right.
2
Use the command dial to choose the time di erence between local time and your home time zone. Press MENU/OK when
settings are complete.
To set the camera clock to local time, highlight g LOCAL and press MENU/OK. To set the clock to the time in your home time
zone, select h HOME. If g LOCAL is selected, g will be displayed for three seconds when the camera is turned on.
L
L
a
a
Choose a language (P 17).
o
o
SILENT MODE
SILENT MODE
(
(
defaults to
defaults to
OFF)
OFF)
Select ON to disable the speaker,  ash, and illuminator in situations in which camera sounds or lights may be unwelcome.
R
R
RESET
RESET
Reset all settings except F DATE/TIME, N TIME DIFFERENCE, and O BACKGROUND COLOR to default values. Press the
command dial right to display a con rmation dialog, then highlight OK and press MENU/OK.
81
Menus
The Setup Menu
K
K
FORMAT
FORMAT
If a memory card is inserted in the camera, this option will format the memory card. If no memory card is inserted, this option
will format internal memory. Select OK to begin formatting.
Q All data—including protected pictures—will be deleted from the memory card or internal memory. Be sure important  les
have been copied to a computer or other storage device.
Q Do not open the battery-chamber cover during formatting.
A
A
IMAGE DISP.
IMAGE DISP.
(
(
defaults to
defaults to
1.5 SEC)
1.5 SEC)
Choose how long images are displayed after shooting. Colors may di er slightly from those in the  nal image and “noise mot-
tling may be visible at high sensitivities.
Option
Option
Description
Description
CONTINUOUS
CONTINUOUS
Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway. To zoom in on
the active focus point, press the center of the command control; press again to cancel zoom.
1.5 SEC
1.5 SEC
Pictures are displayed for three seconds (3 SEC) or 1.5 seconds (1.5 SEC) or until the shutter button is pressed
halfway.
3 SEC
3 SEC
OFF
OFF Pictures are not displayed after shooting.
R OFF has no e ect in continuous shooting mode.
82
The Setup Menu
B
B
FRAME NO.
FRAME NO.
(
(
defaults to
defaults to
CONTINUOUS)
CONTINUOUS)
New pictures are stored in image  les named using a four-digit  le number assigned by adding one to the
last  le number used. The  le number is displayed during playback as shown at right. B FRAME NO. con-
trols whether  le numbering is reset to 0001 when a new memory card is inserted or the current memory
card or internal memory is formatted.
Directory
number
File
number
Frame number
100-0001
Option
Option
Description
Description
CONTINUOUS
CONTINUOUS
Numbering continues from the last  le number used or the  rst available  le number, whichever is higher.
Choose this option to reduce the number of pictures with duplicate  le names.
RENEW
RENEW Numbering is reset to 0001 after formatting or when a new memory card is inserted.
R If the frame number reaches 999-9999, the shutter release will be disabled (P 111).
R Selecting R RESET (P 80) sets B FRAME NO. to CONTINUOUS but does not reset the  le number.
R Frame numbers for pictures taken with other cameras may di er.
G
G
OPERATION VOL.
OPERATION VOL.
(
(
defaults to
defaults to
c
c
)
)
Adjust the volume of the sounds produced when camera controls are operated. Choose f (mute) to disable control sounds.
H
H
SHUTTER VOLUME
SHUTTER VOLUME
(
(
defaults to
defaults to
c
c
)
)
Adjust the volume of the sounds produced when the shutter is released. Choose f (mute) to disable control sounds.
e
e
SHUTTER SOUND
SHUTTER SOUND
(
(
defaults to
defaults to
i
i
SOUND1)
SOUND1)
Choose the sound made by the shutter (P 22).
I
I
PLAYBACK VOLUME
PLAYBACK VOLUME
(
(
defaults to
defaults to
7)
7)
Control the volume for movie playback.
83
Menus
The Setup Menu
J
J
LCD BRIGHTNESS
LCD BRIGHTNESS
(
(
defaults to
defaults to
0)
0)
Control the brightness of the displays.
M
M
AUTO POWER OFF
AUTO POWER OFF
(
(
defaults to
defaults to
2 MIN)
2 MIN)
Choose the length of time before the camera turns o automatically when no operations are performed. Shorter times reduce
the drain on the battery; if OFF is selected, the camera must be turned o manually. Note that in some situations the camera
turns o automatically even when OFF is selected.
G
G
OVF POWER SAVE MODE
OVF POWER SAVE MODE
(
(
defaults to
defaults to
OFF)
OFF)
Select ON to reduce the drain on the battery, roughly doubling the number of pictures that can be taken on a single charge
(P 23).
H
H
QUICK START MODE
QUICK START MODE
(
(
defaults to
defaults to
OFF)
OFF)
Select ON to reduce the time needed to restart the camera after it has been turned o to about 0.7 seconds (P 23).
F
F
Fn BUTTON
Fn BUTTON
(
(
defaults to
defaults to
N
N
ISO)
ISO)
Choose the role played by the Fn button (P 53).
84
The Setup Menu
N
N
ISO AUTO CONTROL
ISO AUTO CONTROL
Choose whether the camera automatically adjusts sensitivity if optimal exposure can not be achieved at current settings. Select-
ing N ISO AUTO CONTROL displays the settings listed in the table below; press the command dial up or down to highlight a
setting and press the dial right to display options for the highlighted item, then highlight the desired option and press MENU/OK.
When ISO AUTO CONTROL is on, the upper limit for sensitivity is  xed at the value selected for MAX. SENSITIVITY. The camera
will not exceed this limit even if underexposure would result.
Option
Option
Description
Description
Default
Default
ISO AUTO CONTROL
ISO AUTO CONTROL
If ON is selected, the camera will automatically adjust sensitivity if optimal exposure can not be
achieved at current settings.
ON
ON
MAX. SENSITIVITY
MAX. SENSITIVITY
Choose the upper limit for auto sensitivity from ISO 400, 800, 1600, and 3200 (the lower limit is  xed
at ISO 200).
800
800
MIN. SHUTTER SPEED
MIN. SHUTTER SPEED
When the shutter speed dial is rotated to A and ISO AUTO CONTROL is ON, the camera will adjust
sensitivity only as required to prevent shutter speed from being slower than this value.
1/60 SEC
1/60 SEC
R In shutter-priority AE and manual exposure modes, the camera will automatically adjust sensitivity if optimal exposure can
not be achieved at the shutter speed selected by the user.
R Sensitivity is automatically adjusted for optimal  ash output when a  ash is used.
R Shutter speed, aperture, and the current sensitivity are displayed when the shutter button is pressed halfway.
B
B
RED EYE REMOVAL
RED EYE REMOVAL
(
(
defaults to
defaults to
OFF)
OFF)
Choose ON to remove red-eye e ects caused by the  ash.
R Red-eye reduction is performed only when a face is detected.
R Red-eye removal is not available with RAW images.
85
Menus
The Setup Menu
C
C
AF ILLUMINATOR
AF ILLUMINATOR
(
(
defaults to
defaults to
ON)
ON)
If ON is selected, the AF-assist illuminator will light to assist autofocus.
R The AF-assist illuminator turns o automatically in silent mode.
Q The camera may be unable to focus using the AF-assist illuminator in some cases. If the camera is unable to focus in macro
mode, try increasing the distance to the subject.
Q Avoid shining the AF-assist illuminator directly into your subjects eyes.
k
k
AE/AF-LOCK MODE
AE/AF-LOCK MODE
(
(
defaults to
defaults to
AE & AF ON WHEN PRESSING)
AE & AF ON WHEN PRESSING)
If AE & AF ON WHEN PRESSING is selected, exposure and/or focus will lock while the AFL/AEL button is pressed. If AE & AF ON/
OFF SWITCH is selected, exposure and/or focus will lock while the AFL/AEL button is pressed and remain locked until the button
is pressed again.
v
v
AE/AF-LOCK BUTTON
AE/AF-LOCK BUTTON
(
(
defaults to
defaults to
AE LOCK ONLY)
AE LOCK ONLY)
Choose the role played by the AFL/AEL button (P 46).
j
j
FOCUS CHECK
FOCUS CHECK
(
(
defaults to
defaults to
ON)
ON)
If ON is selected, the center of frame will be magni ed in the display to assist focus when the center of the command control is
pressed in manual focus mode (P 48, 49).
I
I
FOCUS RING
FOCUS RING
(
(
defaults to
defaults to
X
X
CW)
CW)
Choose the direction in which the focus ring is rotated to increase the focus distance.
M
M
FOCUS SCALE UNITS
FOCUS SCALE UNITS
(
(
defaults to
defaults to
METERS
METERS
)
)
Choose the units used for the focus distance indicator (P 6, 7).
86
The Setup Menu
z
z
FRAMING GUIDLINE
FRAMING GUIDLINE
(
(
defaults to
defaults to
F
F
GRID 9)
GRID 9)
Choose the type of framing grid available in shooting mode.
F
F
GRID 9
GRID 9
G
G
GRID 24
GRID 24
H
H
HD FRAMING
HD FRAMING
P P P
For rule of thirds” composition. A six-by-four grid. Frame HD pictures in the crop shown by
the lines at the top and bottom of the
display.
J
J
COLOR SPACE
COLOR SPACE
(
(
defaults to
defaults to
sRGB)
sRGB)
Choose the gamut of colors available for color reproduction.
Option
Option
Description
Description
sRGB
sRGB Recommended in most situations.
Adobe RGB
Adobe RGB For commercial printing.
K
K
LONG EXPOSURE NR
LONG EXPOSURE NR
(
(
defaults to
defaults to
ON)
ON)
Select ON to reduce mottling in long time-exposures (P 29).
87
Menus
The Setup Menu
n
n
SAVE ORG IMAGE
SAVE ORG IMAGE
(
(
defaults to
defaults to
OFF)
OFF)
Choose ON to save unprocessed copies of pictures taken using B RED EYE REMOVAL.
m
m
AUTOROTATE PB
AUTOROTATE PB
(
(
defaults to
defaults to
ON)
ON)
Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback.
O
O
BACKGROUND COLOR
BACKGROUND COLOR
Choose a color scheme.
c
c
GUIDANCE DISPLAY
GUIDANCE DISPLAY
(
(
defaults to
defaults to
ON)
ON)
Choose whether to display tool tips.
G
G
CORRECTED AF FRAME
CORRECTED AF FRAME
(
(
defaults to
defaults to
OFF)
OFF)
If ON is selected, a second focus frame for focus distances of about 80 cm (2.6 ft) will be added to the display in the optical view-
nder. The focus frame for the current focus distance is displayed in green when the shutter button is pressed halfway.
ON
ON
OFF
OFF
Focus frame
Focus frame
Focus frame for focus distance of in nity
P
F5.6
200
2000
P
F5.6
200
2000
Focus frame for focus distance of
about 80 cm (2.6 ft)
88
Connections
Connections
Viewing Pictures on TV
Viewing Pictures on TV
To show pictures to a group, connect the camera to a TV using an HDMI cable (available separately
from third-party suppliers; note that the TV can only be used for playback, not shooting).
1
Turn the camera o .
2
Connect the cable as shown below.
Insert into HDMI mini
connector
Insert into HDMI
connector
R Be sure the connectors are fully inserted.
3
Tune the television to the HDMI input channel. See the documentation supplied with the televi-
sion for details.
4
Turn the camera on and press a button. The camera monitor turns o and pictures and movies
are played back on the TV. Note that the camera volume controls have no e ect on sounds played
on the TV; use the television volume controls to adjust the volume.
R The USB cable can not be used while an HDMI cable is connected.
R Some televisions may brie y display a black screen when movie playback begins.
89
Connections
Printing Pictures via USB
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without  rst being copied to a computer. Note that depending on the
printer, not all the functions described below may be supported.
Connecting the Camera
Connecting the Camera
1
Connect the supplied USB cable as shown and
turn the printer on.
2
Turn the camera on and press a button.
t USB will be displayed in the monitor, fol-
lowed by the PictBridge display shown below
at right.
USB
00
OK SET
FRAME
SHEETS
PICTBRIDGE
TOTAL:
00000
Printing Selected Pictures
Printing Selected Pictures
1
Press the command dial left or right
to display a picture you wish to print.
R To print one copy of the current picture, pro-
ceed directly to Step 3.
2
Press the command dial up or down
to choose the number of copies (up
to 99). Repeat steps 1–2 to select
additional pictures.
3
Press MENU/OK to display a con rma-
tion dialog.
CANCELYES
PRINT THESE FRAMES
TOTAL:
9
SHEETS
4
Press MENU/OK to start printing.
90
Printing Pictures via USB
R Pictures can be printed from internal memory or a
memory card that has been formatted in the cam-
era.
R Page size, print quality, and border selections are
made using the printer.
Printing the Date of Recording
Printing the Date of Recording
To print the date of recording on pictures, press
DISP/BACK in the PictBridge display and select PRINT
WITH DATE
s (to print pictures without the date of
recording, select PRINT WITHOUT DATE). To ensure
that the date is correct, set the camera clock before
taking pictures. Some printers do not support date
printing. See the printer manual for details.
Printing the DPOF Print Order
Printing the DPOF Print Order
To print the print order created with K PRINT
ORDER (DPOF) in the playback menu (P 91):
1
In the PictBridge display, press DISP/
BACK to open the PictBridge menu.
2
Press the command dial up or down
to highlight u PRINT DPOF.
PICTBRIDGE
PRINT WITH DATE
s
PRINT DPOF
PRINT WITHOUT DATE
3
Press MENU/OK to display a con rma-
tion dialog.
TOTAL:
9
SHEETS
CANCELYES
PRINT DPOF OK?
4
Press MENU/OK to start printing.
91
Connections
Printing Pictures via USB
During Printing
During Printing
The message shown at right is
displayed during printing. Press
DISP/BACK to cancel before all
pictures are printed (depending
on the printer, printing may end
before the current picture has
printed).
If printing is interrupted, turn the camera o and
then on again.
Disconnecting the Camera
Disconnecting the Camera
Con rm that the above message is not displayed and
turn the camera o . Disconnect the USB cable.
Creating a DPOF Print Order
Creating a DPOF Print Order
The K PRINT ORDER (DPOF) option in the play-
back menu can be used to create a digital “print
order for PictBridge-compatible printers or de-
vices that support DPOF.
DPOF
DPOF
DPOF (Digital Print Order Format) is stan-
dard that allows pictures to be printed from
“print orders stored in internal memory or
on a memory card. The information in the
order includes the pictures to be printed and the
number of copies of each picture.
CANCEL
PRINTING
92
Printing Pictures via USB
WITH DATE s/ WITHOUT DATE
To modify the DPOF print order, select K PRINT
ORDER (DPOF) in the playback menu and press
the command dial up or down to highlight WITH
DATE s or WITHOUT DATE.
SET
PLAYBACK MENU
PRINT ORDER
(
DPOF
)
DISP ASPECT
WITH DATE
s
WITHOUT DATE
RESET ALL
WITH DATE s: Print date of recording
on pictures.
WITHOUT DATE: Print pictures without
date.
Press MENU/OK and follow the steps below.
1
Press the command dial left or right
to display a picture you wish to in-
clude in or remove from the print
order.
2
Press the command dial up or down
to choose the number of copies (up
to 99). To remove a picture from
the order, press the command dial
down until the number of copies is 0.
SHEETS
DPOF:
00001
01
PRINT ORDER
(
DPOF
)
SETFRAME
Total number of prints
Number of copies
3
Repeat steps 1–2 to complete the
print order. Press MENU/OK to save
the print order when settings are
complete, or DISP/BACK to exit without chang-
ing the print order.
4
The total number of prints is dis-
played in the monitor. Press MENU/
OK to exit.
The pictures in the current
print order are indicated by a
u icon during playback.
93
Connections
Printing Pictures via USB
RESET ALL
To cancel the current print
order, select RESET ALL for
K PRINT ORDER (DPOF). The
con rmation shown at right
will be displayed; press MENU/OK
to remove all pictures from the
order.
R Remove the memory card to create or modify a
print order for the pictures in internal memory.
R Print orders can contain a maximum of 999 pictures.
R If a memory card is inserted
containing a print order cre-
ated by another camera, the
message shown at right will
be displayed. Pressing MENU/OK
cancels the print order; a new
print order must be created as
described above.
RESET DPOF OK?
CANCELYES
NOYES
RESET DPOF OK?
94
Viewing Pictures on a Computer
Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where they can be stored, viewed,
organized, and printed. Before proceeding, install the software as described below. Do NOT connect the
camera to the computer until installation is complete.
Windows: Installing MyFinePix Studio
Windows: Installing MyFinePix Studio
1
Con rm that the computer meets the following system requirements:
Windows 7
Windows 7
1
1
Windows Vista
Windows Vista
1
1
Windows XP
Windows XP
1
1
CPU
CPU
3 GHz Pentium 4 or better
3 GHz Pentium 4 or better
(2.4
(2.4
GHz Core 2 Duo or better)
GHz Core 2 Duo or better)
2
2
2 GHz Pentium 4 or better
2 GHz Pentium 4 or better
(2.4
(2.4
GHz Core 2 Duo or better)
GHz Core 2 Duo or better)
2
2
RAM
RAM
1 GB or more
1 GB or more
512 MB or more
512 MB or more
(1
(1
GB or more)
GB or more)
2
2
Free disk space
Free disk space
15 GB or more
15 GB or more
2 GB or more
2 GB or more
Video
Video
1024 × 768 pixels or more with 24-bit color or better
A graphics processing unit (GPU) that supports DirectX 7 or later
Other
Other
Built-in USB port recommended. Operation is not guaranteed with other USB ports.
Internet connection (broadband recommended) required to install .NETFramework (if necessary), to use
auto update feature, and when performing such tasks as sharing pictures on-line or via e-mail.
1 Other versions of Windows are not supported. Only pre-installed operating systems are supported; operation is not
guaranteed on home-built computers or computers that have been upgraded from earlier versions of Windows.
2 Recommended when displaying HD movies.
2
Start the computer. Log in to an account with administrator privileges before proceeding.
95
Connections
Viewing Pictures on a Computer
3
Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
Windows 7/Windows Vista
Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control” dialog will then be displayed;
click Ye s (Windows 7) or Allow (Windows Vista).
The installer will start automatically; click Install MyFinePix Studio and follow the on-screen in-
structions to install MyFinePix Studio and RAW FILE CONVERTER.
If the Installer Does Not Start Automatically
If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer from the Start menu, then
double-click the FINEPIX CD icon to open the FINEPIX CD window and double-click setup or SETUP.EXE.
4
If prompted to install Windows Media Player, DirectX, or .NET Framework, follow the on-screen
instructions to complete installation.
5
Remove the installer CD from the CD-ROM drive when installation is complete. Store the installer
CD in a dry location out of direct sunlight in case you need to re-install the software.
Installation is now complete. Proceed to “Connecting the Camera (P 98).
96
Viewing Pictures on a Computer
Macintosh: Installing FinePixViewer
Macintosh: Installing FinePixViewer
1
Con rm that the computer meets the following system requirements:
CPU
CPU PowerPC or Intel (Core 2 Duo or better)
*
OS
OS
Pre-installed copies of Mac OS X version 10.3.9–10.6
(visit http://www.fujifilm.com/support/digital_cameras/compatibility/ for more information)
RAM
RAM 256 MB or more (1 GB or more)
*
Free disk space
Free disk space A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running
Video
Video 800 × 600 pixels or more with thousands of colors or better
Other
Other Built-in USB port recommended. Operation is not guaranteed with other USB ports.
* Recommended when displaying HD movies.
2
After starting the computer and quitting any applications that may be running, insert the installer
CD in a CD-ROM drive and double-click Installer for Mac OS X.
3
An installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter an
administrator name and password when prompted and click OK, then follow the on-screen in-
structions to install FinePixViewer. Click Exit to quit the installer when installation is complete.
R To install RAW FILE CONVERTER, double-click SILKYRFCEXInstaller. RAW FILE CONVERTER is used to view
RAW images on your computer.
4
Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD
if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry
location out of direct sunlight in case you need to re-install the software.
97
Connections
Viewing Pictures on a Computer
5
Mac OS X 10.5 or earlier: Open the Applications folder, start Image Capture, and select Preferences
from the Image Capture application menu. The Image Capture preferences dialog will be displayed;
choose Other in the When a camera is connected, open menu, then select FPVBridge in the
Applications/FinePixViewer folder and click Open. Quit Image Capture.
Mac OS X 10.6: Connect the camera and turn it on. Open the Applications folder and start Image
Capture. The camera will be listed under DEVICES; select the camera and choose FPVBridge from
the Connecting this camera opens menu and click Choose. Quit Image Capture.
Installation is now complete. Proceed to “Connecting the Camera (P 98).
98
Viewing Pictures on a Computer
Connecting the Camera
Connecting the Camera
1
If the pictures you wish to copy are stored on a memory card, insert the card into the camera (P 13).
If no card is inserted, pictures will be copied from internal memory.
R Windows users may require the Windows CD when starting the software for the  rst time.
Q Loss of power during transfer could result in loss of data or damage to internal memory or the memory
card. Insert a fresh or fully-charged battery before connecting the camera.
2
Turn the camera o and connect the supplied USB cable as
shown, making sure the connectors are fully inserted. Con-
nect the camera directly to the computer; do not use a USB
hub or keyboard.
3
Turn the camera on. MyFinePix Studio or FinePixViewer will start automatically; follow the on-screen
instructions to copy pictures to the computer. To exit without copying pictures, click Cancel.
Q If the software does not start automatically, it may not be correctly installed. Disconnect the camera and
reinstall the software.
For more information on using the supplied software, start the application and select the appropriate
option from the Help menu.
99
Connections
Viewing Pictures on a Computer
Q If a memory card containing a large number of images is inserted, there may be a delay before the software
starts and you may be unable to import or save images. Use a memory card reader to transfer pictures.
Q Make sure that the computer does not display a message stating that copying is in progress and that the
indicator lamp is out before turning the camera o or disconnecting the USB cable (if the number of im-
ages copied is very large, the indicator lamp may remain lit after the message has cleared from the computer
display). Failure to observe this precaution could result in loss of data or damage to internal memory or the
memory card.
Q Disconnect the camera before inserting or removing memory cards.
Q In some cases, it may not be possible to access pictures saved to a network server using the supplied software
in the same way as on a standalone computer.
Q The user bears all applicable fees charged by the phone company or Internet service provider when using
services that require an Internet connection.
Disconnecting the Camera
Disconnecting the Camera
After con rming that the indicator lamp is out, turn the camera o and disconnect the USB cable.
Uninstalling the Supplied Software
Uninstalling the Supplied Software
Only uninstall the supplied software when it is no longer required or before beginning reinstallation. After quit-
ting the software and disconnecting the camera, drag the “FinePixViewer folder from Applications” into the
Trash and select Empty Trash in the Finder menu (Macintosh), or open the control panel and use “Programs
and Features” (Windows 7/Windows Vista) or Add or Remove Programs” (Windows XP) to uninstall MyFinePix
Studio. Under Windows, one or more con rmation dialogs may be displayed; read the contents carefully before
clicking OK.
100
Technical Notes
Technical Notes
Optional Accessories
Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
Accessories from FUJIFILM
Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM. For the latest information on the accesso-
ries available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.com/
products/digital_cameras/index.html.
Rechargeable
Rechargeable
Li-ion batteries
Li-ion batteries
NP-95: Additional large-capacity NP-95 rechargeable batteries can be purchased as re-
quired.
Battery chargers
Battery chargers BC-65N: Replacement battery chargers can be purchased as required. The BC-65N charg-
es an NP-95 battery in about 210 minutes at +20 °C (+68 °F).
Flash units
Flash units Shoe Mount Flash EF-20: This clip-on  ash unit (powered by two AA batteries) has a Guide
Number of 20/66 (ISO 100, m/ft.) and supports TTL  ash control. The  ash head can be
rotated upwards 90° for bounce lighting.
Shoe Mount Flash EF-42: This clip-on  ash unit (powered by four AA batteries) has a Guide
Number of 42/138 (ISO 100, m/ft.) and supports TTL  ash control and auto power zoom
in the range 24–105 mm (35 mm format equivalent). The  ash head can be rotated 90°
up, 180° left, or 120° right for bounce lighting.
Leather cases
Leather cases LC-X100: This leather case, exclusively for use with the X100, combines practicality with the
luxury of leather and comes with a shoulder strap made of the same material. Pictures
can be taken with the camera still in its case.
101
Technical Notes
Optional Accessories
1
Remove the front ring.
R
R
If you have trouble re-
If you have trouble re-
moving the front ring,
moving the front ring,
grip the entire ring and
grip the entire ring and
rotate it as shown.
rotate it as shown.
2
Attach the adapter ring
as shown, with the pro-
jections facing out.
3
Align the male and fe-
male threads as shown
and place the lens hood
on the adapter ring. Ro-
tate the lens hood as
shown.
R Keep the front ring and lens cap in a safe place
when not in use.
R Attach the adapter ring before attaching  lters from
third-party suppliers.
Lens hoods
Lens hoods LH-X100: This aluminum lens hood, exclusively for use with the X100, comes with an AR-
X100 adapter ring made of the same material. The adapter ring is required when attach-
ing the hood.
Adapter rings
Adapter rings AR-X100: An aluminum adapter ring exclusively for use with the X100. It is used when
attaching the LH-X100 lens hood or φ49 mm  lters available from third-party suppliers.
Attaching Adapter Rings and Lens Hoods
Attaching Adapter Rings and Lens Hoods
102
Optional Accessories
Connecting the Camera to Other Devices
Connecting the Camera to Other Devices
* Available separately from FUJIFILM.
Available separately from third-party suppliers.
USB cable (supplied)
SD card slot or card reader
Computer
Computer Related
Computer Related
Printing
Printing
Printer
PictBridge-compatible printer
USB cable
(supplied)
FINEPIX
X100
Audio/Visual
Audio/Visual
Flash Photography
Flash Photography
EF-20 shoe mount
ash
*
EF-42 shoe mount
ash
*
SD/SDHC/SDXC
memory card
HDTV
HDMI cable
103
Technical Notes
Caring for the Camera
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Storage and Use
Storage and Use
If the camera will not be used for an extended pe-
riod, remove the battery and memory card. Do
not store or use the camera in locations that are:
exposed to rain, steam, or smoke
very humid or extremely dusty
exposed to direct sunlight or very high temper-
atures, such as in a closed vehicle on a sunny
day
• extremely cold
subject to strong vibration
exposed to strong magnetic  elds, such as near
a broadcasting antenna, power line, radar emit-
ter, motor, transformer, or magnet
in contact with volatile chemicals such as pes-
ticides
next to rubber or vinyl products
Water and Sand
Exposure to water and sand can also damage the
camera and its internal circuitry and mechanisms.
When using the camera at the beach or seaside,
avoid exposing the camera to water or sand. Do
not place the camera on a wet surface.
Condensation
Sudden increases in temperature, such as occur
when entering a heated building on a cold day,
can cause condensation inside the camera. If this
occurs, turn the camera o and wait an hour be-
fore turning it on again. If condensation forms on
the memory card, remove the card and wait for
the condensation to dissipate.
If the camera will not be used for an extended pe-
riod, remove the battery and memory card. Do
not store or use the camera in locations that are:
exposed to rain, steam, or smoke
very humid or extremely dusty
exposed to direct sunlight or very high temper-
atures, such as in a closed vehicle on a sunny
day
• extremely cold
subject to strong vibration
exposed to strong magnetic  elds, such as near
a broadcasting antenna, power line, radar emit-
ter, motor, transformer, or magnet
in contact with volatile chemicals such as pes-
ticides
next to rubber or vinyl products
Water and Sand
Exposure to water and sand can also damage the
camera and its internal circuitry and mechanisms.
When using the camera at the beach or seaside,
avoid exposing the camera to water or sand. Do
not place the camera on a wet surface.
Condensation
Sudden increases in temperature, such as occur
when entering a heated building on a cold day,
can cause condensation inside the camera. If this
occurs, turn the camera o and wait an hour be-
fore turning it on again. If condensation forms on
the memory card, remove the card and wait for
the condensation to dissipate.
104
Caring for the Camera
Cleaning
Cleaning
Use a blower to remove dust from the lens and
monitor, then gently wipe with a soft, dry cloth.
Any remaining stains can be removed by wip-
ing gently with a piece of FUJIFILM lens-cleaning
paper to which a small amount of lens-cleaning
uid has been applied. Care should be taken to
avoid scratching the lens or monitor. The camera
body can be cleaned with a soft, dry cloth. Do not
use alcohol, thinner, or other volatile chemicals,
which can discolor the leather on the camera
body.
Traveling
Traveling
Keep the camera in your carry-on baggage.
Checked baggage may su er violent shocks that
could damage the camera.
105
Troubleshooting
Troubleshooting
Troubleshooting
Problems and Solutions
Problems and Solutions
Power and Battery
Problem
Problem
Solution
Solution
The camera does not
The camera does not
turn on.
turn on.
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
11) or insert a fully-charged spare battery (
11) or insert a fully-charged spare battery (
P
P
12).
12).
The battery is inserted incorrectly
The battery is inserted incorrectly
: Reinsert in the correct orientation (
: Reinsert in the correct orientation (
P
P
12).
12).
The battery-chamber cover is not latched
The battery-chamber cover is not latched
: Latch the battery-chamber cover (
: Latch the battery-chamber cover (
P
P
13).
13).
The battery runs down
The battery runs down
quickly.
quickly.
The battery is cold
The battery is cold
: Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera
: Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera
immediately before taking a picture.
immediately before taking a picture.
There is dirt on the battery terminals
There is dirt on the battery terminals
: Clean the terminals with a soft, dry cloth.
: Clean the terminals with a soft, dry cloth.
AF-C
AF-C
is selected for focus mode
is selected for focus mode
: Select a diff erent focus mode (
: Select a diff erent focus mode (
P
P
48).
48).
The battery has been charged many times
The battery has been charged many times
: The battery has reached the end of its charging life. Purchase a new
: The battery has reached the end of its charging life. Purchase a new
battery.
battery.
The camera turns o
The camera turns o
suddenly.
suddenly.
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
11) or insert a fully-charged spare battery (
11) or insert a fully-charged spare battery (
P
P
12).
12).
Charging does not start.
Charging does not start.
Reinsert the battery in the correct orientation and make sure that the charger is plugged in (
Reinsert the battery in the correct orientation and make sure that the charger is plugged in (
P
P
11).
11).
Charging is slow.
Charging is slow.
Charge the battery at room temperature (
Charge the battery at room temperature (
P
P
118).
118).
The charging lamp lights,
The charging lamp lights,
but the battery does not
but the battery does not
charge.
charge.
There is dirt on the battery terminals
There is dirt on the battery terminals
: Clean the terminals with a soft, dry cloth.
: Clean the terminals with a soft, dry cloth.
The battery has been charged many times
The battery has been charged many times
: The battery has reached the end of its charging life. Purchase a new
: The battery has reached the end of its charging life. Purchase a new
battery. If the battery still fails to charge, contact your FUJIFILM dealer.
battery. If the battery still fails to charge, contact your FUJIFILM dealer.
Menus and Displays
Problem
Problem
Solution
Solution
Display is not in English.
Display is not in English.
Select
Select
ENGLISH
ENGLISH
for
for
L
L
a
a
(
(
P
P
80).
80).
106
Problems and Solutions
Shooting
Problem
Problem
Solution
Solution
No picture is taken when
No picture is taken when
the shutter button is
the shutter button is
pressed.
pressed.
Memory is full
Memory is full
: Insert a new memory card or delete pictures (
: Insert a new memory card or delete pictures (
P
P
13, 58, 67).
13, 58, 67).
Memory is not formatted
Memory is not formatted
: Format the memory card or internal memory (
: Format the memory card or internal memory (
P
P
81).
81).
There is dirt on the memory card contacts
There is dirt on the memory card contacts
: Clean the contacts with a soft, dry cloth.
: Clean the contacts with a soft, dry cloth.
The memory card is damaged
The memory card is damaged
: Insert a new memory card (
: Insert a new memory card (
P
P
13).
13).
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
11) or insert a fully-charged spare battery (
11) or insert a fully-charged spare battery (
P
P
12).
12).
The camera has turned o automatically
The camera has turned o automatically
: Turn the camera on (
: Turn the camera on (
P
P
16).
16).
The indicator lamp was orange when you attempted to record a panorama
The indicator lamp was orange when you attempted to record a panorama
: Wait until the indicator lamps turns off
: Wait until the indicator lamps turns off
(
(
P
P
3).
3).
Mottling (“noise”) appears
Mottling (“noise”) appears
in the monitor or
in the monitor or
electronic view nder
electronic view nder
when the shutter button is
when the shutter button is
pressed halfway.
pressed halfway.
Gain is increased to aid composition when the subject is poorly lit and aperture is stopped down, which may result
Gain is increased to aid composition when the subject is poorly lit and aperture is stopped down, which may result
in noticeable mottling when images are previewed in the displays. Images taken with the camera are unaff ected.
in noticeable mottling when images are previewed in the displays. Images taken with the camera are unaff ected.
The display goes dark after
The display goes dark after
shooting.
shooting.
The display may darken while the fl ash charges. Wait for the fl ash to charge.
The display may darken while the fl ash charges. Wait for the fl ash to charge.
The camera does not focus.
The camera does not focus.
The subject is close to the camera
The subject is close to the camera
: Select macro mode (
: Select macro mode (
P
P
34).
34).
The subject is far away from the camera
The subject is far away from the camera
: Cancel macro mode (
: Cancel macro mode (
P
P
34).
34).
The subject is not suited to autofocus
The subject is not suited to autofocus
: Use focus lock (
: Use focus lock (
P
P
46) or manual focus (
46) or manual focus (
P
P
48).
48).
The  ash does not  re.
The  ash does not  re.
The  ash can not be used at current settings
The  ash can not be used at current settings
: See the list of the settings that can be used with the fl ash (
: See the list of the settings that can be used with the fl ash (
P
P
120).
120).
The  ash is o (
The  ash is o (
P
P
)
)
: Choose a diff erent fl ash mode (
: Choose a diff erent fl ash mode (
P
P
32).
32).
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
11) or insert a fully-charged spare battery (
11) or insert a fully-charged spare battery (
P
P
12).
12).
The camera is in continuous mode
The camera is in continuous mode
: Select a diff erent drive mode (
: Select a diff erent drive mode (
P
P
37).
37).
The camera is in silent mode
The camera is in silent mode
: Turn silent mode off (
: Turn silent mode off (
P
P
22, 80).
22, 80).
Some  ash modes are not
Some  ash modes are not
available.
available.
The camera is in silent mode. Turn silent mode off (
The camera is in silent mode. Turn silent mode off (
P
P
22, 80).
22, 80).
107
Troubleshooting
Problems and Solutions
Problem
Problem
Solution
Solution
The  ash does not fully
The  ash does not fully
light the subject.
light the subject.
The subject is not in range of the  ash
The subject is not in range of the  ash
: Position the subject in range of the fl ash (
: Position the subject in range of the fl ash (
P
P
33).
33).
The  ash window is obstructed
The  ash window is obstructed
: Hold the camera correctly.
: Hold the camera correctly.
Shutter speed is faster than
Shutter speed is faster than
1
1
/
/
2,000
2,000
s
s
: Choose a slower shutter speed (
: Choose a slower shutter speed (
P
P
25, 27).
25, 27).
Pictures are blurred.
Pictures are blurred.
The lens is dirty
The lens is dirty
: Clean the lens (
: Clean the lens (
P
P
xi, 104).
xi, 104).
The lens is blocked
The lens is blocked
: Keep objects away from the lens.
: Keep objects away from the lens.
s
s
is displayed during shooting and the focus frame is displayed in red
is displayed during shooting and the focus frame is displayed in red
: Check focus before shooting (
: Check focus before shooting (
P
P
31).
31).
k
k
is displayed during shooting
is displayed during shooting
: Use the fl ash or mount the camera on a tripod (
: Use the fl ash or mount the camera on a tripod (
P
P
32).
32).
Pictures are mottled.
Pictures are mottled.
Shutter speed is slow and the ambient temperature is high
Shutter speed is slow and the ambient temperature is high
: This is normal and does not indicate a malfunction.
: This is normal and does not indicate a malfunction.
The camera has been used continuously at high temperatures or a temperature warning is displayed
The camera has been used continuously at high temperatures or a temperature warning is displayed
: Turn the cam-
: Turn the cam-
era off and wait for it to cool down.
era off and wait for it to cool down.
Playback
Problem
Problem
Solution
Solution
Pictures are grainy.
Pictures are grainy.
The pictures were taken with a diff erent make or model of camera.
The pictures were taken with a diff erent make or model of camera.
Playback zoom is unavail-
Playback zoom is unavail-
able.
able.
The pictures were created using
The pictures were created using
O
O
RESIZE
RESIZE
or with a diff erent make or model of camera.
or with a diff erent make or model of camera.
No sound in movie
No sound in movie
playback.
playback.
Playback volume is too low
Playback volume is too low
: Adjust playback volume (
: Adjust playback volume (
P
P
82).
82).
The microphone was obstructed
The microphone was obstructed
: Hold the camera correctly during recording (
: Hold the camera correctly during recording (
P
P
2, 42).
2, 42).
The speaker is obstructed
The speaker is obstructed
: Hold the camera correctly during playback (
: Hold the camera correctly during playback (
P
P
2, 61).
2, 61).
The camera is in silent mode
The camera is in silent mode
: Turn silent mode off (
: Turn silent mode off (
P
P
22, 80).
22, 80).
Selected pictures are not
Selected pictures are not
deleted.
deleted.
Some of the pictures selected for deletion are protected. Remove protection using the device with which it was
Some of the pictures selected for deletion are protected. Remove protection using the device with which it was
originally applied (
originally applied (
P
P
76).
76).
File numbering is unex-
File numbering is unex-
pectedly reset.
pectedly reset.
The battery-chamber cover was opened while the camera was on. Turn the camera off before opening the bat-
The battery-chamber cover was opened while the camera was on. Turn the camera off before opening the bat-
tery-chamber cover (
tery-chamber cover (
P
P
12, 16).
12, 16).
108
Problems and Solutions
Connections/Miscellaneous
Problem
Problem
Solution
Solution
No picture or sound.
No picture or sound.
The camera is not properly connected
The camera is not properly connected
: Connect the camera properly (
: Connect the camera properly (
P
P
88
). Note that once the camera is con-
). Note that once the camera is con-
nected, pictures will be displayed on the TV instead of in the camera monitor.
nected, pictures will be displayed on the TV instead of in the camera monitor.
Input on the television is set to “TV”
Input on the television is set to “TV”
: Set input to “HDMI”.
: Set input to “HDMI”.
The volume on the TV is too low
The volume on the TV is too low
: Use the controls on the television to adjust the volume.
: Use the controls on the television to adjust the volume.
The computer does not
The computer does not
recognize the camera.
recognize the camera.
Be sure the camera and computer are correctly connected (
Be sure the camera and computer are correctly connected (
P
P
98
).
).
Can not transfer RAW or
Can not transfer RAW or
JPEG  les to computer.
JPEG  les to computer.
Use the bundled software to transfer pictures (
Use the bundled software to transfer pictures (
P
P
94
).
).
Pictures can not be
Pictures can not be
printed.
printed.
The camera is not properly connected
The camera is not properly connected
: Connect the camera correctly (
: Connect the camera correctly (
P
P
89
).
).
The printer is o
The printer is o
: Turn the printer on.
: Turn the printer on.
Only one copy is printed/
Only one copy is printed/
the date is not printed.
the date is not printed.
The printer is not PictBridge compatible.
The printer is not PictBridge compatible.
The camera is unrespon-
The camera is unrespon-
sive.
sive.
Temporary camera malfunction
Temporary camera malfunction
: Remove and reinsert the battery (
: Remove and reinsert the battery (
P
P
12).
12).
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
11) or insert a fully-charged spare battery (
11) or insert a fully-charged spare battery (
P
P
12).
12).
The camera does not func-
The camera does not func-
tion as expected.
tion as expected.
Remove and reinsert the battery (
Remove and reinsert the battery (
P
P
12). If the problem persists, contact your FUJIFILM dealer.
12). If the problem persists, contact your FUJIFILM dealer.
No sound.
No sound.
Turn silent mode off (
Turn silent mode off (
P
P
22, 80).
22, 80).
109
Troubleshooting
Warning Messages and Displays
Warning Messages and Displays
The following warnings appear in the display.
Warning
Warning
Description
Description
B
B
(red)
(red)
Low battery. Charge the battery (
Low battery. Charge the battery (
P
P
11) or insert a fully-charged spare battery (
11) or insert a fully-charged spare battery (
P
P
12).
12).
A
A
(blinks red)
(blinks red)
Battery exhausted. Charge the battery (
Battery exhausted. Charge the battery (
P
P
11) or insert a fully-charged spare battery (
11) or insert a fully-charged spare battery (
P
P
12).
12).
k
k
Slow shutter speed. Pictures may be blurred; use the fl ash or a tripod.
Slow shutter speed. Pictures may be blurred; use the fl ash or a tripod.
s
s
(displayed in red with
(displayed in red with
red focus frame)
red focus frame)
The camera can not focus. Try one of the following solutions:
The camera can not focus. Try one of the following solutions:
Use focus lock to focus on another subject at the same distance, then recompose the picture (
Use focus lock to focus on another subject at the same distance, then recompose the picture (
P
P
46).
46).
Use macro mode to focus when taking close-ups (
Use macro mode to focus when taking close-ups (
P
P
34).
34).
Aperture or shutter speed
Aperture or shutter speed
displayed in red
displayed in red
The subject is too bright or too dark and the picture will be over- or under-exposed. If the subject is dark, use the
The subject is too bright or too dark and the picture will be over- or under-exposed. If the subject is dark, use the
ash (
ash (
P
P
32).
32).
FOCUS ERROR
FOCUS ERROR
Camera malfunction. Turn the camera off and then on again. If the message persists, contact a FUJIFILM dealer.
Camera malfunction. Turn the camera off and then on again. If the message persists, contact a FUJIFILM dealer.
TURN OFF THE CAMERA
TURN OFF THE CAMERA
AND TURN ON AGAIN
AND TURN ON AGAIN
LENS CONTROL ERROR
LENS CONTROL ERROR
BUSY
BUSY
The memory card is incorrectly formatted. Use the camera to format the card (
The memory card is incorrectly formatted. Use the camera to format the card (
P
P
81).
81).
CARD NOT INITIALIZED
CARD NOT INITIALIZED
The memory card or internal memory is not formatted or the memory card has been formatted in a computer or other
The memory card or internal memory is not formatted or the memory card has been formatted in a computer or other
device
device
: Format the memory card or internal memory using the
: Format the memory card or internal memory using the
K
K
FORMAT
FORMAT
option in the camera setup menu
option in the camera setup menu
(
(
P
P
81).
81).
The memory card contacts require cleaning
The memory card contacts require cleaning
: Clean the contacts with a soft, dry cloth. If the message is repeated,
: Clean the contacts with a soft, dry cloth. If the message is repeated,
format the card (
format the card (
P
P
81). If the message persists, replace the card.
81). If the message persists, replace the card.
Camera malfunction
Camera malfunction
: Contact a FUJIFILM dealer.
: Contact a FUJIFILM dealer.
110
Warning Messages and Display
Warning
Warning
Description
Description
PROTECTED CARD
PROTECTED CARD
The memory card is locked. Unlock the card (
The memory card is locked. Unlock the card (
P
P
13).
13).
CARD ERROR
CARD ERROR
The memory card is not formatted for use in the camera
The memory card is not formatted for use in the camera
: Format the card (
: Format the card (
P
P
81).
81).
The memory card contacts require cleaning or the memory card is damaged
The memory card contacts require cleaning or the memory card is damaged
: Clean the contacts with a soft, dry
: Clean the contacts with a soft, dry
cloth. If the message is repeated, format the card (
cloth. If the message is repeated, format the card (
P
P
81). If the message persists, replace the card.
81). If the message persists, replace the card.
Incompatible memory card
Incompatible memory card
: Use a compatible card (
: Use a compatible card (
P
P
15).
15).
Camera malfunction
Camera malfunction
: Contact a FUJIFILM dealer.
: Contact a FUJIFILM dealer.
a
a
MEMORY FULL
MEMORY FULL
The memory card or internal memory is full and pictures can not be recorded or copied. Delete pictures (
The memory card or internal memory is full and pictures can not be recorded or copied. Delete pictures (
P
P
58, 67)
58, 67)
or insert a memory card with more free space (
or insert a memory card with more free space (
P
P
13).
13).
b
b
MEMORY FULL
MEMORY FULL
INTERNAL MEMORY IS FULL
INTERNAL MEMORY IS FULL
INSERT A NEW CARD
INSERT A NEW CARD
NO CARD
NO CARD
No memory card inserted when
No memory card inserted when
E
E
COPY
COPY
is selected. Insert a memory card.
is selected. Insert a memory card.
WRITE ERROR
WRITE ERROR
Memory card error or connection error
Memory card error or connection error
: Reinsert the card or turn the camera off and then on again. If the message
: Reinsert the card or turn the camera off and then on again. If the message
persists, contact a FUJIFILM dealer.
persists, contact a FUJIFILM dealer.
Not enough memory remaining to record additional pictures
Not enough memory remaining to record additional pictures
: Delete pictures (
: Delete pictures (
P
P
58, 67) or insert a memory card
58, 67) or insert a memory card
with more free space (
with more free space (
P
P
13).
13).
The memory card or internal memory is not formatted
The memory card or internal memory is not formatted
: Format the memory card or internal memory (
: Format the memory card or internal memory (
P
P
81).
81).
READ ERROR
READ ERROR
The  le is corrupt or was not created with the camera
The  le is corrupt or was not created with the camera
: The fi le can not be viewed.
: The fi le can not be viewed.
The memory card contacts require cleaning
The memory card contacts require cleaning
: Clean the contacts with a soft, dry cloth. If the message is repeated,
: Clean the contacts with a soft, dry cloth. If the message is repeated,
format the card (
format the card (
P
P
81). If the message persists, replace the card.
81). If the message persists, replace the card.
Camera malfunction
Camera malfunction
: Contact a FUJIFILM dealer.
: Contact a FUJIFILM dealer.
111
Troubleshooting
Warning Messages and Display
Warning
Warning
Description
Description
FRAME NO. FULL
FRAME NO. FULL
The camera has run out of frame numbers (current frame number is 999-9999). Format the memory card and
The camera has run out of frame numbers (current frame number is 999-9999). Format the memory card and
select
select
RENEW
RENEW
for
for
B
B
FRAME NO.
FRAME NO.
Take a picture to reset frame numbering to 100-0001, then select
Take a picture to reset frame numbering to 100-0001, then select
CONTINU-
CONTINU-
OUS
OUS
for
for
B
B
FRAME NO.
FRAME NO.
(
(
P
P
82).
82).
TOO MANY FRAMES
TOO MANY FRAMES
A search has returned more than 30,000 results
A search has returned more than 30,000 results
: Choose a search that returns fewer results.
: Choose a search that returns fewer results.
More than 999 images are selected for deletion
More than 999 images are selected for deletion
: Choose fewer images.
: Choose fewer images.
PROTECTED FRAME
PROTECTED FRAME
An attempt was made to delete or rotate to a protected picture. Remove protection and try again (
An attempt was made to delete or rotate to a protected picture. Remove protection and try again (
P
P
76).
76).
PRESS AND HOLD
PRESS AND HOLD
THE DISP BUTTON TO
THE DISP BUTTON TO
DEACTIVATE SILENT MODE
DEACTIVATE SILENT MODE
An attempt was made to adjust the volume with the camera in silent mode. Exit silent mode before adjusting
An attempt was made to adjust the volume with the camera in silent mode. Exit silent mode before adjusting
the volume (
the volume (
P
P
22, 80).
22, 80).
CAN NOT CROP
CAN NOT CROP
The picture is damaged or was not created with the camera.
The picture is damaged or was not created with the camera.
m
m
CANNOT EXECUTE
CANNOT EXECUTE
Red-eye removal can not be applied to pictures created with other devices.
Red-eye removal can not be applied to pictures created with other devices.
F
F
CANNOT EXECUTE
CANNOT EXECUTE
Red-eye removal can not be applied to movies.
Red-eye removal can not be applied to movies.
CAN NOT ROTATE
CAN NOT ROTATE
The selected picture can not be rotated.
The selected picture can not be rotated.
F
F
CAN NOT ROTATE
CAN NOT ROTATE
Movies can not be rotated.
Movies can not be rotated.
b
b
NO IMAGE
NO IMAGE
The source selected for
The source selected for
E
E
COPY
COPY
contains no images. Select a diff erent source.
contains no images. Select a diff erent source.
a
a
NO IMAGE
NO IMAGE
112
Warning Messages and Display
Warning
Warning
Description
Description
DPOF FILE ERROR
DPOF FILE ERROR
The DPOF print order on the current memory card contains more than 999 images. Copy the pictures to internal
The DPOF print order on the current memory card contains more than 999 images. Copy the pictures to internal
memory and create a new print order.
memory and create a new print order.
CAN NOT SET DPOF
CAN NOT SET DPOF
The picture can not be printed using DPOF.
The picture can not be printed using DPOF.
F
F
CAN NOT SET DPOF
CAN NOT SET DPOF
Movies can not be printed using DPOF.
Movies can not be printed using DPOF.
COMMUNICATION ERROR
COMMUNICATION ERROR
A connection error occurred while pictures were being printed or copied to a computer or other device. Confi rm
A connection error occurred while pictures were being printed or copied to a computer or other device. Confi rm
that the device is turned on and that the USB cable is connected.
that the device is turned on and that the USB cable is connected.
PRINTER ERROR
PRINTER ERROR
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). To resume printing,
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). To resume printing,
turn the printer off and then turn it back on.
turn the printer off and then turn it back on.
PRINTER ERROR
PRINTER ERROR
RESUME?
RESUME?
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If printing does not
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If printing does not
resume automatically, press
resume automatically, press
MENU/OK
MENU/OK
to resume.
to resume.
CANNOT BE PRINTED
CANNOT BE PRINTED
An attempt was made to print a movie, a picture not created with the camera, or a picture in a format not sup-
An attempt was made to print a movie, a picture not created with the camera, or a picture in a format not sup-
ported by the printer. Movies, RAW images, and some pictures created with other devices can not be printed; if
ported by the printer. Movies, RAW images, and some pictures created with other devices can not be printed; if
the picture is a still picture created with the camera, check the printer manual to confi rm that the printer supports
the picture is a still picture created with the camera, check the printer manual to confi rm that the printer supports
the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures can not be printed.
the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures can not be printed.
p
p
Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.
Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.
113
Appendix
Appendix
Appendix
Glossary
Glossary
DPOF (Digital Print Order Format): A standard that allows pictures to be printed from print orders” stored
in internal memory or on a memory card. The information in the order includes the pictures to be print-
ed and the number of copies of each picture.
EV (Exposure Value): The exposure value is determined by the sensitivity of the image sensor and the amount
of light that enters the camera while the image sensor is exposed. Each time the amount of light doubles, EV
increases by one; each time the amount of light is halved, EV decreases by one. The amount of light entering the
camera can be controlled by adjusting aperture and shutter speed.
Exif Print: A standard for storing information with pictures for optimal color reproduction during printing.
HDMI (High-De nition Multimedia Interface): An interface standard for the transmission of images and sound that
adds audio input to the DVI interface used to connect computers to displays.
JPEG (Joint Photographic Experts Group): A compressed  le format for color images. The higher the compression
rate, the greater the loss of information and more noticeable drop in quality when the picture is displayed.
MOV: A movie  le format (extension .mov”) developed by Apple, Inc., and viewed using QuickTime Player. This
format is popular on the Internet.
White balance: The human brain automatically adapts to changes in the color of light, with the result that objects
that appear white under one light source still appear white when the color of the light source changes. Digital
cameras can mimic this adjustment by processing images according to the color of the light source. This process
is known as white balance.
114
Internal Memory/Memory Card Capacity
Internal Memory/Memory Card Capacity
The following table shows the recording time or number of pictures available at di erent image sizes.
All  gures are approximate;  le size varies with the scene recorded, producing wide variations in the
number of  les that can be stored. The number of exposures or length remaining may not diminish at
an even rate. A limited number of test pictures can be taken when no memory card is inserted.
Medium
Medium
O
O
Internal memory (approx. 20 MB)
Internal memory (approx. 20 MB)
4 GB
4 GB
8 GB
8 GB
T
T
FINE
FINE
NORMAL
NORMAL
FINE
FINE
NORMAL
NORMAL
FINE
FINE
NORMAL
NORMAL
Photographs
Photographs
O
O
3 : 2
3 : 2
4
4
7
7
820
820
1300
1300
1640
1640
2620
2620
O
O
16 : 9
16 : 9
5
5
8
8
960
960
1530
1530
1940
1940
3070
3070
P
P
3 : 2
3 : 2
7
7
14
14
1260
1260
2470
2470
2530
2530
4970
4970
P
P
16 : 9
16 : 9
8
8
16
16
1490
1490
2950
2950
2990
2990
5920
5920
Q
Q
3 : 2
3 : 2
14
14
28
28
2470
2470
4760
4760
4970
4970
9570
9570
Q
Q
16 : 9
16 : 9
21
21
32
32
3750
3750
5630
5630
7540
7540
11310
11310
Motion
Motion
panorama
panorama
180°
180°
(Vertical)
(Vertical)
2
2
5
5
480
480
960
960
970
970
1940
1940
180°
180°
(Horizontal)
(Horizontal)
3
3
8
8
720
720
1440
1440
1460
1460
2890
2890
120°
120°
(Vertical)
(Vertical)
3
3
8
8
720
720
1440
1440
1460
1460
2890
2890
120°
120°
(Horizontal)
(Horizontal)
6
6
12
12
1080
1080
2130
2130
2180
2180
4290
4290
RAW
RAW
1
1
210
210
420
420
Movies
Movies
h
h
1280
1280
*
*
18 sec.
18 sec.
50 min.
50 min.
100 min.
100 min.
* Use a
G card or better. Individual movies can not exceed 10 minutes in length.
115
Appendix
Speci cations
Speci cations
System
Model
Model
FinePix X100 digital camera
FinePix X100 digital camera
E ective pixels
E ective pixels
12.3 million
12.3 million
Image sensor
Image sensor
23.6 mm × 15.8 mm (APS-C format) CMOS (complementary metal-oxide semiconductor) image sensor with
23.6 mm × 15.8 mm (APS-C format) CMOS (complementary metal-oxide semiconductor) image sensor with
square pixels and primary color fi lter
square pixels and primary color fi lter
Storage media
Storage media
Internal memory
Internal memory
(approx. 20 MB)
(approx. 20 MB)
SD/SDHC/SDXC memory cards
SD/SDHC/SDXC memory cards
File system
File system
Compliant with
Compliant with
D
D
esign Rule for
esign Rule for
C
C
amera
amera
F
F
ile System
ile System
(DCF)
(DCF)
, Exif 2.3, and
, Exif 2.3, and
D
D
igital
igital
P
P
rint
rint
O
O
rder
rder
F
F
ormat
ormat
(DPOF)
(DPOF)
File format
File format
Still pictures
Still pictures
: Exif 2.3 JPEG
: Exif 2.3 JPEG
(compressed)
(compressed)
; RAW
; RAW
(original RAF format, special-purpose software required)
(original RAF format, special-purpose software required)
; RAW+JPG available
; RAW+JPG available
Movies
Movies
: H.264 standard with stereo sound
: H.264 standard with stereo sound
(MOV)
(MOV)
Image size
Image size
O
O
3 : 2
3 : 2
: 4,288 × 2,848
: 4,288 × 2,848
O
O
16 : 9
16 : 9
: 4,288 × 2,416
: 4,288 × 2,416
P
P
3 : 2
3 : 2
: 3,072 × 2,048
: 3,072 × 2,048
P
P
16 : 9
16 : 9
: 3,072 × 1,728
: 3,072 × 1,728
Q
Q
3 : 2
3 : 2
: 2,176 × 1,448
: 2,176 × 1,448
Q
Q
16 : 9
16 : 9
: 1,920 × 1,080
: 1,920 × 1,080
Motion panorama 180
Motion panorama 180
: 2,160 × 7,680
: 2,160 × 7,680
(Vertical)
(Vertical)
/ 7,680 × 1,440
/ 7,680 × 1,440
(Horizontal)
(Horizontal)
Motion panorama 120
Motion panorama 120
: 2,160 × 5,120
: 2,160 × 5,120
(Vertical)
(Vertical)
/ 5,120 × 1,440
/ 5,120 × 1,440
(Horizontal)
(Horizontal)
Lens
Lens
FUJINON fi xed focal length lens
FUJINON fi xed focal length lens
Focal length
Focal length
f=23 mm
f=23 mm
(35 mm format equivalent: 35 mm)
(35 mm format equivalent: 35 mm)
Maximum aperture
Maximum aperture
F2.0
F2.0
Aperture
Aperture
F2.0 F16 in steps of
F2.0 F16 in steps of
/
/
EV (9-blade diaphragm)
EV (9-blade diaphragm)
Focus range
Focus range
(distance from front of lens)
(distance from front of lens)
Approx. 80 cm
Approx. 80 cm
(2.6 ft.)
(2.6 ft.)
–∞
–∞
Macro (
Macro (
F
F
) mode
) mode
: 10 cm
: 10 cm
(3.9 in.)
(3.9 in.)
2.0 m
– 2.0 m
(6.6 ft.)
(6.6 ft.)
Sensitivity
Sensitivity
Standard output sensitivity equivalent to ISO 200 6400 in increments of
Standard output sensitivity equivalent to ISO 200 – 6400 in increments of
/
/
EV; extended output sensitivity equiva-
EV; extended output sensitivity equiva-
lent ISO 100 or 12800; auto sensitivity control available
lent ISO 100 or 12800; auto sensitivity control available
Metering
Metering
256-segment
256-segment
t
t
hrough-
hrough-
t
t
he-
he-
l
l
ens (TTL) metering; MULTI, SPOT, AVERAGE
ens (TTL) metering; MULTI, SPOT, AVERAGE
Exposure control
Exposure control
Programmed AE
Programmed AE
(with program shift)
(with program shift)
; shutter-priority AE; aperture-priority AE; manual exposure
; shutter-priority AE; aperture-priority AE; manual exposure
Exposure compensation
Exposure compensation
–2 EV +2 EV in increments of
–2 EV – +2 EV in increments of
/
/
EV
EV
116
Speci cations
System
Shutter speed
Shutter speed
(combined
(combined
mechanical and electronic
mechanical and electronic
shutter)
shutter)
P
P
mode
mode
:
:
/
/
sec. to
sec. to
/
/


sec.
sec.
*
*
Bulb
Bulb
: Max. 60 min.
: Max. 60 min.
All other modes
All other modes
: 30 sec. to
: 30 sec. to
/
/


sec.
sec.
*
*
*
*
/
/


sec at F2, and
sec at F2, and
/
/


sec at F8 or smaller aperture
sec at F8 or smaller aperture
Continuous
Continuous
Up to 10 JPEG, 8 RAW, or 8 RAW+JPEG images at 5 or 3 fps
Up to 10 JPEG, 8 RAW, or 8 RAW+JPEG images at 5 or 3 fps
Focus
Focus
Mode
Mode
: Single or continuous AF; manual focus with focus ring
: Single or continuous AF; manual focus with focus ring
Focus-area selection
Focus-area selection
: Multi, area with focus area size selection (fi ve steps)
: Multi, area with focus area size selection (fi ve steps)
Autofocus system
Autofocus system
: Contrast-detect TTL AF with AF-assist illuminator
: Contrast-detect TTL AF with AF-assist illuminator
White balance
White balance
Custom, color temperature selection, auto, direct sunlight, shade, daylight uorescent, warm white uorescent,
Custom, color temperature selection, auto, direct sunlight, shade, daylight fl uorescent, warm white fl uorescent,
cool white fl uorescent, incandescent, underwater
cool white fl uorescent, incandescent, underwater
Self-timer
Self-timer
Off , 2 sec., 10 sec.
Off , 2 sec., 10 sec.
Flash
Flash
Auto fl ash; eff ective range at ISO 1600 is approx. 50 cm 9 m / 1.6 ft. 29.5 ft.; accessory shoe with TTL contacts
Auto fl ash; eff ective range at ISO 1600 is approx. 50 cm 9 m / 1.6 ft. 29.5 ft.; accessory shoe with TTL contacts
Mode
Mode
Auto, fi ll fl ash, off , slow sync
Auto, fi ll fl ash, off , slow sync
(red-eye removal o )
(red-eye removal o )
; auto with red-eye removal, fi ll fl ash with red-eye removal, off , slow
; auto with red-eye removal, fi ll fl ash with red-eye removal, off , slow
sync with red-eye removal
sync with red-eye removal
(red-eye removal on)
(red-eye removal on)
Hybrid view nder
Hybrid view nder
Optical view nder
Optical view nder
: Reverse Galilean viewfi nder with electronic bright frame display and approx. 0.5 × magnifi ca-
: Reverse Galilean viewfi nder with electronic bright frame display and approx. 0.5 × magnifi ca-
tions; frame coverage approx. 90%
tions; frame coverage approx. 90%
Electronic view nder
Electronic view nder
: 0.47-in., 1,440k-dot color LCD viewfi nder; diopter adjustment –2 +1 m
: 0.47-in., 1,440k-dot color LCD viewfi nder; diopter adjustment –2 +1 m
–1
–1
(dpt); eye point
(dpt); eye point
approx. 15 mm; frame coverage approx. 100%
approx. 15 mm; frame coverage approx. 100%
LCD monitor
LCD monitor
2.8-in., 460k-dot color LCD monitor; frame coverage approx. 100%
2.8-in., 460k-dot color LCD monitor; frame coverage approx. 100%
Movies
Movies
h
h
(1,280 × 720); 24 fps; stereo sound; maximum length 10 minutes
(1,280 × 720); 24 fps; stereo sound; maximum length 10 minutes
Languages
Languages
Arabic, Bulgarian, Simplifi ed Chinese, Traditional Chinese, Czech, Danish, Dutch, English, Farsi, Finnish, French, Ger-
Arabic, Bulgarian, Simplifi ed Chinese, Traditional Chinese, Czech, Danish, Dutch, English, Farsi, Finnish, French, Ger-
man, Greek, Hebrew, Hungarian, Indonesian, Italian, Japanese, Kazakh, Korean, Latvian, Lithuanian, Norwegian,
man, Greek, Hebrew, Hungarian, Indonesian, Italian, Japanese, Kazakh, Korean, Latvian, Lithuanian, Norwegian,
Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Spanish, Swedish, Thai, Turkish, Ukrainian, Vietnamese
Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Spanish, Swedish, Thai, Turkish, Ukrainian, Vietnamese
117
Appendix
Speci cations
Input/output terminals
HDMI output
HDMI output
HDMI mini connector
HDMI mini connector
Digital input/output
Digital input/output
USB 2.0 High-Speed
USB 2.0 High-Speed
Power supply/other
Power supply
Power supply
NP-95 rechargeable battery
NP-95 rechargeable battery
Battery life
Battery life
(approximate
(approximate
number of frames that can
number of frames that can
be taken with a fully-charged
be taken with a fully-charged
battery)
battery)
Battery type
Battery type
Approximate number of frames
Approximate number of frames
NP-95
NP-95
(type supplied with camera)
(type supplied with camera)
300
300
CIPA standard, measured using battery supplied with camera and SD memory card.
CIPA standard, measured using battery supplied with camera and SD memory card.
Note
Note
: Number of shots that can be taken with battery varies with battery charge level and will decline at low
: Number of shots that can be taken with battery varies with battery charge level and will decline at low
temperatures.
temperatures.
Camera size
Camera size
(W × H × D)
(W × H × D)
126.5 mm × 74.4 mm × 53.9 (31.0
126.5 mm × 74.4 mm × 53.9 (31.0
*
*
) mm / 5.0 in. × 2.9 in. × 2.1 (1.2
) mm / 5.0 in. × 2.9 in. × 2.1 (1.2
*
*
) in.
) in.
* Excluding projecting parts, measured at the thinnest part
* Excluding projecting parts, measured at the thinnest part
Camera weight
Camera weight
Approx. 405 g / 14.3 oz., excluding battery, accessories, and memory card
Approx. 405 g / 14.3 oz., excluding battery, accessories, and memory card
Shooting weight
Shooting weight
Approx. 445 g / 15.7 oz., including battery and memory card
Approx. 445 g / 15.7 oz., including battery and memory card
Operating conditions
Operating conditions
Temperature
Temperature
: 0 °C to +40 °C / +32 °F to +104 °F
: 0 °C to +40 °C / +32 °F to +104 °F
Humidity
Humidity
: 10% 80%
: 10% – 80%
(no condensation)
(no condensation)
118
Speci cations
NP-95 rechargeable battery
Nominal voltage
Nominal voltage
DC 3.6 V
DC 3.6 V
Nominal capacity
Nominal capacity
1,800 mAh
1,800 mAh
Operating temperature
Operating temperature
0 °C to +40 °C/+32 °F to +104 °F
0 °C to +40 °C/+32 °F to +104 °F
Dimensions
Dimensions
(W × H × D)
(W × H × D)
35.2 mm × 49.5 mm × 10.8 mm / 1.3 in. × 1.9 in. × 0.4 in.
35.2 mm × 49.5 mm × 10.8 mm / 1.3 in. × 1.9 in. × 0.4 in.
Weight
Weight
Approx. 39 g / 1.3 oz.
Approx. 39 g / 1.3 oz.
BC-65N battery charger
Rated input
Rated input
100 V 240 V AC, 50/60 Hz
100 V – 240 V AC, 50/60 Hz
Input capacity
Input capacity
15 VA
15 VA
Rated output
Rated output
4.2 V DC, 650 mA
4.2 V DC, 650 mA
Supported batteries
Supported batteries
NP-95 rechargeable batteries
NP-95 rechargeable batteries
Charging time
Charging time
Approx. 210 minutes (+20 °C/+68 °F)
Approx. 210 minutes (+20 °C/+68 °F)
Operating temperature
Operating temperature
0 °C to +40 °C/+32 °F to +104 °F
0 °C to +40 °C/+32 °F to +104 °F
Dimensions
Dimensions
(W × H × D)
(W × H × D)
65 mm × 25.3 mm × 80 mm/2.5 in. × 0.9 in. × 3.1 in., excluding projections
65 mm × 25.3 mm × 80 mm/2.5 in. × 0.9 in. × 3.1 in., excluding projections
Weight
Weight
Approx. 59 g/2.0 oz., excluding battery
Approx. 59 g/2.0 oz., excluding battery
Weight and dimensions vary with the country or region of sale. Labels, menus, and other displays may di er from those on the
actual camera.
119
Appendix
Speci cations
Notices
Notices
• Speci cations subject to change without notice; for the latest information, visit http://www.fujifilm.com/products/
digital_cameras/index.html. FUJIFILM shall not be held liable for damages resulting from errors in this manual.
Although the electronic view nder and LCD monitor are manufactured using advanced high-precision technol-
ogy, small bright points and anomalous colors may appear, particularly in the vicinity of text. This is normal for
this type of LCD display and does not indicate a malfunction; images recorded with the camera are una ected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric  elds, static electricity,
or line noise).
Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.
120
Restrictions on Camera Settings
Restrictions on Camera Settings
The options available in each shooting mode are listed below.
Option
Option
P
P
S
S
A
A
M
M
r
r
F
F
F
F
(Macro Mode)
(Macro Mode)
OFF
OFF
1
1
1
1
F
F
N
N
(Flash)
(Flash)
B
B
OFF
OFF
AUTO
AUTO
N
N
O
O
P
P
B
B
ON
ON
K
K
L
L
M
M
P
P
WB
WB
(White Balance)
(White Balance)
I
I
(Continuous)
(Continuous)
5 fps
5 fps
3 fps
3 fps
Bracketing
Bracketing
O
O
W
W
X
X
Y
Y
Metering
Metering
o
o
2
2
2
2
p
p
q
q
Focus Mode
Focus Mode
AF-C
AF-C
AF-S
AF-S
3
3
MF
MF
Exposure Compensation
Exposure Compensation
Option
Option
P
P
S
S
A
A
M
M
r
r
F
F
B
B
SELF-TIMER
SELF-TIMER
N
N
ISO
ISO
H (12800)
H (12800)
6400
6400
5000
5000
4000
4000
3200
3200
2500
2500
2000
2000
1600
1600
800
800
640
640
500
500
400
400
200
200
L (100)
L (100)
O
O
IMAGE SIZE
IMAGE SIZE
O
O
P
P
Q
Q
4
4
T
T
IMAGE
IMAGE
QUALITY
QUALITY
FINE
FINE
NORMAL
NORMAL
FINE+RAW
FINE+RAW
NORMAL+RAW
NORMAL+RAW
RAW
RAW
121
Appendix
Restrictions on Camera Settings
Option
Option
P
P
S
S
A
A
M
M
r
r
F
F
U
U
DYNAMIC
DYNAMIC
RANGE
RANGE
AUTO
AUTO
A
A
B
B
C
C
P
P
FILM
FILM
SIMULATION
SIMULATION
c
c
d
d
e
e
b
b
e
e
d
d
f
f
f
f
t
t
ND FILTER
ND FILTER
d
d
WB SHIFT
WB SHIFT
f
f
COLOR
COLOR
H
H
SHARPNESS
SHARPNESS
r
r
HIGHLIGHT TONE
HIGHLIGHT TONE
s
s
SHADOW TONE
SHADOW TONE
h
h
NOISE REDUCTION
NOISE REDUCTION
F
F
AF MODE
AF MODE
s
s
5
5
t
t
5
5
I
I
FLASH
FLASH
g
g
EXTERNAL FLASH
EXTERNAL FLASH
u
u
SELECT CUSTOM SETTING
SELECT CUSTOM SETTING
K
K
EDIT/SAVE CUSTOM SETTING
EDIT/SAVE CUSTOM SETTING
Option
Option
P
P
S
S
A
A
M
M
r
r
F
F
v
v
DISP. CUSTOM
DISP. CUSTOM
SETTING
SETTING
FRAMING
FRAMING
GUIDLINE
GUIDLINE
ELECTRONIC
ELECTRONIC
LEVEL
LEVEL
AF DISTANCE
AF DISTANCE
INDICATOR
INDICATOR
HISTOGRAM
HISTOGRAM
APERTURE/
APERTURE/
S-SPEED/ISO
S-SPEED/ISO
EXP.
EXP.
COMPENSATION
COMPENSATION
PHOTOMETRY
PHOTOMETRY
FLASH
FLASH
WHITE BALANCE
WHITE BALANCE
FILM SIMULATION
FILM SIMULATION
DYNAMIC RANGE
DYNAMIC RANGE
FRAMES
FRAMES
REMAINING
REMAINING
BATTERY LEVEL
BATTERY LEVEL
IMAGE SIZE/
IMAGE SIZE/
QUALITY
QUALITY
H
H
QUICK START MODE
QUICK START MODE
122
Restrictions on Camera Settings
Option
Option
P
P
S
S
A
A
M
M
r
r
F
F
N
N
ISO AUTO
ISO AUTO
CONTROL
CONTROL
ISO AUTO
ISO AUTO
CONTROL
CONTROL
MAX. SENSITIVITY
MAX. SENSITIVITY
MIN. SHUTTER
MIN. SHUTTER
SPEED
SPEED
B
B
RED EYE REMOVAL
RED EYE REMOVAL
C
C
AF ILLUMINATOR
AF ILLUMINATOR
j
j
FOCUS CHECK
FOCUS CHECK
I
I
FOCUS RING
FOCUS RING
J
J
COLOR SPACE
COLOR SPACE
6
6
K
K
LONG EXPOSURE NR
LONG EXPOSURE NR
1 Fixed at OFF.
2 Fixed at o (multi).
3 Continuous AF is used when AF-S is selected for focus mode.
4 Fixed at Q.
5 Center focus area selected automatically.
6 Automatically optimized for selected shooting mode.
123
Memo
Memo
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fujifilm X100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fujifilm X100 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Fujifilm X100

Fujifilm X100 Aanvulling / aanpassing - Nederlands - 24 pagina's

Fujifilm X100 Gebruiksaanwijzing - Nederlands - 140 pagina's

Fujifilm X100 Aanvulling / aanpassing - Deutsch - 24 pagina's

Fujifilm X100 Gebruiksaanwijzing - Deutsch - 140 pagina's

Fujifilm X100 Aanvulling / aanpassing - English - 24 pagina's

Fujifilm X100 Gebruiksaanwijzing - Français - 140 pagina's

Fujifilm X100 Aanvulling / aanpassing - Français, Italiano, Espanõl, Polski - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info