540533
99
Verklein
Vergroot
Pagina terug
1/144
Pagina verder
DIGITAL CAMERA
X100S
Owner’s Manual
Thank you for your purchase of this product. This
manual describes how to use your FUJIFILM X100S
digital camera and install the supplied software. Be
sure that you have read and understood its contents
before using the camera.
For information on related products, visit our website at
http://www.fujifilm.com/products/digital_cameras/index.html
For more information on the X100S, visit
http://fujifilm-x.com/x100s/
Before You Begin
First Steps
Basic Photography
and Playback
Basic Movie Recording
and Playback
The Q (Quick Menu) Button
More on Photography
and Playback
Menus
Connections
Technical Notes
Troubleshooting
EN
BL02401-101
Appendix
ii
For Your Safety
For Your Safety
Read Instructions: All the safety and operating instructions
should be read before the appliance is operated.
Retain Instructions: The safety and operating instructions
should be retained for future reference.
Heed Warnings: All warnings on the appliance and in the
operating instructions should be adhered to.
Follow Instructions: All operating and use instructions
should be followed.
Installation
Installation
Power Sources: This video product should be operated only
from the type of power source indicated on the marking la-
bel. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power com-
pany. For video products intended to operate from battery
power, or other sources, refer to the operating instructions.
Grounding or Polarization: This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fi t into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try revers-
ing the plug. If the plug should still fail to fi t, contact your
electrician to replace your obsolete outlet. Do not defeat
the safety purpose of the polarized plug.
Alternate Warnings: This video product is equipped with
a three-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only fi t into a grounding-
type power outlet. This is a safety feature. If you are unable
to insert the plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the safety pur-
pose of the grounding type plug.
Overloading: Do not overload wall outlets and extension
cords as this can result in a risk of fi re or electric shock.
Ventilation: Slots and openings in the cabinet are provided
for ventilation, to ensure reliable operation of the video
product and to protect it from overheating, and these open-
ings must not be blocked or covered. The openings should
never be blocked by placing the video product on a bed,
sofa, rug, or other similar surface.
This video product should not be placed in a built-in instal-
lation such as a bookcase or rack unless proper ventilation
is provided or the manufacturer’s instructions have been
adhered to. This video product should never be placed near
or over a radiator or heat register.
Attachments: Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video product near wa-
ter—for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool,
and the like.
Power-Cord Protection: Power-supply cords should be routed
so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular at-
tention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
Accessories: Do not place this video product on an unstable
cart, stand, tripod, bracket, or table. The video product may
fall, causing serious injury to a child or adult, and serious
damage to the appliance. Use only with a cart, stand, tri-
pod, bracket, or table recommended by the manufacturer, or
sold with the video product. Any mounting of the appliance
should follow the manufacturer’s instructions, and should use
a mounting accessory recommended by the manufacturer.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
Antennas
Antennas
Outdoor Antenna Grounding: If an outside antenna or cable
system is connected to the video product, be sure the anten-
na or cable system is grounded so as to provide some protec-
tion against voltage surges and built-up static charges. Sec-
tion 810 of the National Electrical Code, ANSI/NFPA No. 70,
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
Antenna Lead
in Wire
Ground Clamp
Grounding Conductors
(NEC SECTION 810-21)
Power Service Grounding Electrode
System (NEC ART 250. PART H)
Antenna
Discharge Unit
(NEC SECTION
810-20)
Electric Service
Equipment
Ground Clamps
Power Lines: An outside antenna system should not be lo-
cated in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Use
Use
Cleaning: Unplug this video product from the wall outlet be-
fore cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Object and Liquid Entry: Never push objects of any kind into this
video product through openings as they may touch dangerous
voltage points or short out parts that could result in a fi re or elec-
tric shock. Never spill liquid of any kind on the video product.
Lightning: For added protection for this video product re-
ceiver during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the video product due to lightning and
power-line surges.
IMPORTANT SAFETY INSTRUCTIONS
iii
For Your Safety
Service
Service
Servicing: Do not attempt to service this video product
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualifi ed service personnel.
Damage Requiring Service: Unplug this video product from
the wall outlet and refer servicing to qualifi ed service per-
sonnel under the following conditions:
When the power-supply cord or plug is damaged
• If liquid has been spilled, or objects have fallen into the
video product.
If the video product has been exposed to rain or water.
If the video product has been dropped or the cabinet has
been damaged.
If the video product does not operate normally follow the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper adjust-
ment of other controls may result in damage and will often
require extensive work by a qualifi ed technician to restore
the video product to its normal operation.
When the video product exhibits a distinct change in perfor-
mance this indicates a need for service.
Replacement Parts: When replacement parts are required,
be sure the service technician has used replacement parts
specifi ed by the manufacturer or have the same character-
istics as the original part. Unauthorized substitutions may
result in fi re, electric shock or other hazards.
Safety Check: Upon completion of any service or repairs to
this video product, ask the service technician to perform
safety checks to determine that the video product is in
proper operating condition.
Be sure to read these notes before use
Safety Notes
• Make sure that you use your camera correctly. Read these
safety notes and your Owners Manual carefully before use.
• After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indi-
cate the severity of the injury or damage that can result if the
information indicated by the icon is ignored and the product
is used incorrectly as a result.
WARNING
This icon indicates that death or seri-
ous injury can result if the information
is ignored.
CAUTION
This icon indicates that personal injury
or material damage can result if the in-
formation is ignored.
The icons shown below are used to indicate the nature of the
instructions which are to be observed.
Triangular icons tell you that this information re-
quires attention (“Important”).
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an
action that must be performed (“Required”).
WARNING
WARNING
Unplug
from power
socket
If a problem arises, turn the camera o , remove the
battery, and disconnect and unplug the AC power
adapter. Continued use of the camera when it
is emitting smoke, is emitting any unusual odor,
or is in any other abnormal state can cause a fi re
or electric shock. Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter the
camera. If water or foreign objects get inside the
camera, turn the camera off , remove the battery,
and disconnect and unplug the AC power adapt-
er. Continued use of the camera can cause a fi re
or electric shock. Contact your FUJIFILM dealer.
WARNING
WARNING
Do not use in
the bathroom
or shower
Do not use the camera in the bathroom or shower.
This can cause a fi re or electric shock.
Do not disas-
semble
Never attempt to change or take apart the camera
(never open the case). Failure to observe this pre-
caution can cause fi re or electric shock.
Do not touch
internal parts
Should the case break open as the result of a fall or
other accident, do not touch the exposed parts. Fail-
ure to observe this precaution could result in elec-
tric shock or in injury from touching the damaged
parts. Remove the battery immediately, taking
care to avoid injury or electric shock, and take the
product to the point of purchase for consultation.
Do not change, heat or unduly twist or pull the con-
nection cord and do not place heavy objects on the
connection cord. These actions could damage the
cord and cause a fi re or electric shock. If the cord
is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface. This
can cause the camera to fall or tip over and cause
injury.
Never attempt to take pictures while in motion. Do
not use the camera while walking or driving. This
can result in you falling down or being involved in
a traffi c accident.
Do not touch any metal parts of the camera during
a thunderstorm. This can cause an electric shock
due to induced current from the lightning dis-
charge.
Do not use the battery except as speci ed. Load the
battery as shown by the indicator.
Do not heat, change or take apart the battery. Do not
drop or subject the battery to impacts. Do not store
the battery with metallic products. Any of these ac-
tions can cause the battery to burst or leak and
cause fi re or injury as a result.
iv
For Your Safety
WARNING
WARNING
Use only batteries or AC power adapters speci ed for
use with this camera. Do not use voltages other than
the power supply voltage shown. The use of other
power sources can cause a fi re.
If the battery leaks and  uid gets in contact with your
eyes, skin or clothing,  ush the a ected area with
clean water and seek medical attention or call an
emergency number right away.
Do not use the charger to charge batteries other than
those speci ed here. The supplied charger is for
use only with batteries of the type supplied with
the camera. Using the charger to charge conven-
tional batteries or other types of rechargeable
batteries can cause the battery to leak, overheat
or burst.
Do not use in the presence of  ammable objects, ex-
plosive gases, or dust.
When carrying the battery, install it in a digital cam-
era or keep it in the hard case. When storing the bat-
tery, keep it in the hard case. When discarding, cover
the battery terminals with insulation tape. Contact
with other metallic objects or batteries could
cause the battery to ignite or burst.
Keep memory cards out of the reach of small children.
Because memory cards are small, they can be
swallowed by children. Be sure to store memory
cards out of the reach of small children. If a child
swallows a memory card, seek medical attention
or call an emergency number.
CAUTION
CAUTION
Do not use this camera in locations a ected by oil
fumes, steam, humidity or dust. This can cause a
re or electric shock.
Do not leave this camera in places subject to extremely
high temperatures. Do not leave the camera in
locations such as a sealed vehicle or in direct sun-
light. This can cause a fi re.
CAUTION
CAUTION
Keep out of the reach of small children. This product
could cause injury in the hands of a child.
Do not place heavy objects on the camera. This can
cause the heavy object to tip over or fall and
cause injury.
Do not move the camera while the AC power adapter
is still connected. Do not pull on the connection cord
to disconnect the AC power adapter. This can dam-
age the power cord or cables and cause a fi re or
electric shock.
Do not cover or wrap the camera or the AC power
adapter in a cloth or blanket. This can cause heat
to build up and distort the casing or cause a fi re.
When you are cleaning the camera or you do not plan
to use the camera for an extended period, remove
the battery and disconnect and unplug the AC power
adapter. Failure to do so can cause a fi re or elec-
tric shock.
When charging ends, unplug the charger from the
power socket. Leaving the charger plugged into
the power socket can cause a fi re.
Using a  ash too close to a person’s eyes may tempo-
rarily a ect the eyesight. Take particular care when
photographing infants and young children.
When a memory card is removed, the card could come
out of the slot too quickly. Use your  nger to hold it
and gently release the card. Injury could result to
those struck by the ejected card.
Request regular internal testing and cleaning for
your camera. Build-up of dust in your camera
can cause a fi re or electric shock. Contact your
FUJIFILM dealer to request internal cleaning every
two years. Please note that this service is not free
of charge.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
The Battery and Power Supply
Note: Check the type of battery used in your camera and
read the appropriate sections.
The following describes the proper use of batteries and how
to prolong their life. Incorrect use can shorten battery life or
cause leakage, overheating, fi re, or explosion.
Li-ion Batteries
Li-ion Batteries
Read this section if your camera uses a rechargeable
Li-ion battery.
The battery is not charged at shipment. Charge the battery
before use. Keep the battery in its case when not in use.
Notes on the Battery
The battery gradually loses its charge when not in use.
Charge the battery one or two days before use.
Battery life can be extended by turning the camera off when
not in use.
Battery capacity decreases at low temperatures; a depleted
battery may not function at when cold. Keep a fully charged
spare battery in a warm place and exchange as necessary,
or keep the battery in your pocket or other warm place and
insert it in the camera only when shooting. Do not place
the battery in direct contact with hand warmers or other
heating devices.
Charging the Battery
Charge the battery in the supplied battery charger. Charg-
ing times will increase at ambient temperatures below
+10 °C (+50 °F) or above +35 °C (+95 °F). Do not attempt
to charge the battery at temperatures above 40 °C (+104 °F);
at temperatures below 0 °C (+32 °F), the battery will not
charge.
Do not attempt to recharge a fully charged battery. The bat-
tery does not however need to be fully discharged before
charging.
The battery may be warm to the touch immediately after
charging or use. This is normal.
v
For Your Safety
Battery Life
At normal temperatures, the battery can be recharged about
300 times. A noticeable decrease in the length of time the
battery will hold a charge indicates that it has reached the
end of its service life and should be replaced.
Storage
Performance may be impaired if the battery is left unused
for extended periods when fully charged. Run the battery
at before storing it.
If the camera will not be used for an extended period, re-
move the battery and store it in a dry place with an ambient
temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do
not store in locations exposed to extremes of temperature.
Cautions: Handling the Battery
Do not transport or store with metal objects such as neck-
laces or hairpins.
Do not expose to fl ame or heat.
Do not disassemble or modify.
Use with designated chargers only.
Dispose of used batteries promptly.
Do not drop or subject to strong physical shocks.
Do not expose to water.
Keep the terminals clean.
The battery and camera body may become warm to the
touch after extended use. This is normal.
AA Alkaline/Rechargeable Ni-MH Batteries
AA Alkaline/Rechargeable Ni-MH Batteries
Read this section if your camera uses AA alkaline or re-
chargeable AA Ni-MH batteries. Information on compat-
ible battery types may be found elsewhere in the camera
manual.
Cautions: Handling the Batteries
Do not expose to water, fl ame, or heat, or store in warm or
humid conditions.
Do not transport or store with metal objects such as neck-
laces or hairpins.
Do not disassemble or modify the batteries or battery
casing.
Do not subject to strong physical shocks.
Do not use batteries that are leaking, deformed, or discol-
ored.
Keep out of reach of infants and small children.
Insert in the correct orientation.
Do not mix old and new batteries, batteries with diff erent
charge levels, or batteries of diff erent types.
If the camera will not be used for an extended period, re-
move the batteries. Note that the camera clock will be reset.
• The batteries may be warm to the touch immediately after
use. Turn the camera off and allow the batteries to cool
before handling.
• Battery capacity tends to decrease at low temperatures.
Keep spare batteries in a pocket or other warm place and
exchange as necessary. Cold batteries may recover some
of their charge when warmed.
Fingerprints and other stains on the battery terminals
can impair battery performance. Thoroughly clean the
terminals with a soft, dry cloth before inserting them in
the camera.
If the batteries leak, clean the battery compartment
thoroughly before inserting new batteries.
If fl uid from the battery comes into contact with skin
or clothing, fl ush the aff ected area with water. If
uid enters your eyes, immediately  ush the a ected
area with water and seek medical attention. Do not rub
your eyes. Failure to observe this precaution could result
in permanent visual impairment.
Ni-MH Batteries
The capacity of Ni-MH batteries may be temporarily reduced
when new, after long periods of disuse, or if they are repeat-
edly recharged before being fully discharged. This is normal
and does not indicate a malfunction. Capacity can be in-
creased by repeatedly discharging the batteries using the
discharge option in the camera setup menu and recharging
them using a battery charger.
Q CAUTION: Do not use the discharge option with alkaline
batteries.
The camera draws a small amount of current even when off .
Ni-MH batteries that have been left in the camera for an ex-
tended period may be drawn down to the point that they no
longer hold a charge. Battery performance may also drop if
the batteries are run down in a device such as a fl ashlight. Use
the discharge option in the camera setup menu to discharge
Ni-MH batteries. Batteries that no longer hold a charge
even after repeatedly being discharged and recharged have
reached the end of their service life and must be replaced.
Ni-MH batteries can be recharged in a battery charger (sold
separately). Batteries may become warm to the touch after
charging. Refer to the instructions provided with the charger
for more information. Use the charger with compatible bat-
teries only.
Ni-MH batteries gradually lose their charge when not in use.
Disposal
Dispose of used batteries in accord with local regulations.
AC Power Adapters (Available Separately)
AC Power Adapters (Available Separately)
This section applies to all camera models. Use only
FUJIFILM AC power adapters designated for use with this
camera. Other adapters could damage the camera.
The AC power adapter is for indoor use only.
Be sure the DC plug is securely connected to the camera.
Turn the camera off before disconnecting the adapter.
Disconnect the adapter by the plug, not the cable.
Do not use with other devices.
Do not disassemble.
Do not expose to high heat and humidity.
Do not subject to strong physical shocks.
The adapter may hum or become hot to the touch during
use. This is normal.
• If the adapter causes radio interference, reorient or relocate
the receiving antenna.
vi
For Your Safety
Using the Camera
Do not aim the camera at extremely bright light sources,
such as the sun in a cloudless sky. Failure to observe this
precaution could damage the camera image sensor.
• Strong sunlight focused through the viewfi nder may dam-
age the panel of electronic viewfi nder (EVF). Do not aim
the electronic viewfi nder at the sun.
Take Test Shots
Take Test Shots
Before taking photographs on important occasions (such as
at weddings or before taking the camera on a trip), take a
test shot and view the results to ensure that the camera is
functioning normally. FUJIFILM Corporation can not accept
liability for damages or lost profi ts incurred as a result of
product malfunction.
Notes on Copyright
Notes on Copyright
Unless intended solely for personal use, images recorded us-
ing your digital camera system cannot be used in ways that
infringe copyright laws without the consent of the owner.
Note that some restrictions apply to the photographing of
stage performances, entertainments, and exhibits, even
when intended purely for personal use. Users are also asked
to note that the transfer of memory cards containing images
or data protected under copyright laws is only permissible
within the restrictions imposed by those copyright laws.
Handling
Handling
To ensure that images are recorded correctly, do not subject
the camera to impact or physical shocks while images are
being recorded.
Liquid Crystal
Liquid Crystal
In the event that the display is damaged, care should be
taken to avoid contact with liquid crystal. Take the urgent
action indicated should any of the following situations arise:
If liquid crystal comes in contact with your skin, clean the
area with a cloth and then wash thoroughly with soap and
running water.
If liquid crystal enters your eyes, fl ush the aff ected eye with
clean water for at least 15 minutes and then seek medical
assistance.
If liquid crystal is swallowed, rinse your mouth thoroughly
with water. Drink large quantities of water and induce
vomiting, then seek medical assistance.
Although the display is manufactured using extremely high-
precision technology, it may contain pixels that are always lit
or that do not light. This is not a malfunction, and images
recorded with the product are unaff ected.
Trademark Information
Trademark Information
xD-Picture Card and E are trademarks of FUJIFILM
Corporation. The typefaces included herein are solely devel-
oped by DynaComware Taiwan Inc. Macintosh, QuickTime,
and Mac OS are trademarks of Apple Inc. in the U.S.A. and
other countries. Windows 8, Windows 7, Windows Vista, and
the Windows logo are trademarks of the Microsoft group of
companies. Adobe and Adobe Reader are either trademarks
or registered trademarks of Adobe Systems Incorporated in
the U.S.A. and/or other countries. The SDHC and SDXC logos
are trademarks of SD-3C, LLC. The HDMI logo is a trademark.
YouTube is a trademark of Google Inc. All other trade names
mentioned in this manual are the trademarks or registered
trademarks of their respective owners.
Electrical Interference
Electrical Interference
This camera may interfere with hospital or aviation equip-
ment. Consult with hospital or airline staff before using the
camera in a hospital or on an aircraft.
Exif Print (Exif Version 2.3)
Exif Print (Exif Version 2.3)
Exif Print is a newly revised digital camera fi le format in
which information stored with photographs is used for opti-
mal color reproduction during printing.
IMPORTANT NOTICE: Read Before Using the Software
Direct or indirect export, in whole or in part, of licensed soft-
ware without the permission of the applicable governing
bodies is prohibited.
vii
For Your Safety
NOTICES
To prevent  re or shock hazard, do not expose the unit to rain or moisture.
Please read the “Safety Notes” and make sure you understand them before using the
camera.
Perchlorate Material—special handling may apply. See http://www.dtsc.ca.gov/
hazardouswaste/perchlorate.
For Customers in the U. S. A.
For Customers in the U. S. A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful interference, and (2)this
device must accept any interference received, including interference that may cause unde-
sired operation.
CAUTION: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit diff erent from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifi cations not expressly approved in this man-
ual could void the user’s authority to operate the equipment.
Notes on the Grant: To comply with Part 15 of the FCC Rules, this product must be used with
a Fujifi lm-specifi ed ferrite-core A/V cable, USB cable, and DC supply cord.
For Customers in Canada
For Customers in Canada
CAUTION: This Class B digital apparatus complies with Canadian ICES-003.
Disposal of Electrical and Electronic Equipment in Private Households
Disposal of Electrical and Electronic Equipment in Private Households
In the European Union, Norway, Iceland and Liechtenstein: This symbol on the
product, or in the manual and in the warranty, and/or on its packaging indicates
that this product shall not be treated as household waste. Instead it should be
taken to an applicable collection point for the recycling of electrical and elec-
tronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences to the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product.
This symbol on the batteries or accumulators indicates that those batteries shall
not be treated as household waste.
If your equipment contains easy removable batteries or accumulators please dispose these
separately according to your local requirements.
The recycling of materials will help to conserve natural resources. For more detailed informa-
tion about recycling this product, please contact your local city offi ce, your household waste
disposal service or the shop where you purchased the product.
In Countries Outside the European Union, Norway, Iceland and Liechtenstein: If you wish to dis-
card this product, including the batteries or accumulators, please contact your local authori-
ties and ask for the correct way of disposal.
viii
About This Manual
About This Manual
Before using the camera, read this manual and the warnings in “For Your Safety (P ii). For information
on speci c topics, consult the sources below.
Table of Contents
Table of Contents
...................................................
...................................................
P
P
x
x
Troubleshooting
Troubleshooting
................................................
................................................
P
P
111
111
The Table of Contents gives an overview of the
entire manual. The principal camera operations
are listed here.
Having a speci c problem with the camera?
Find the answer here.
Warning Messages and Displays
Warning Messages and Displays
.........................
.........................
P
P
115
115
Glossary
Glossary
............................................................
............................................................
P
P
118
118
Find out whats behind that  ashing icon or error
message in the display.
The meanings of some technical terms may be
found here.
Restrictions on Camera Settings
Restrictions on Camera Settings
..........................
..........................
P
P
125
125
See page 125 for restrictions on the options
available in each shooting mode.
Memory Cards
Memory Cards
Pictures are stored on optional SD, SDHC, and SDXC memory cards (P 15), referred to in this manual as “memory
cards.
ix
Caring for the Camera
Caring for the Camera
For continued enjoyment of your camera, use a soft, dry cloth to clean the camera body after each
use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform the leather
on the camera body. Any liquid on the camera should be removed immediately with a soft, dry cloth.
Use a blower to remove dust from the lens and monitor, then gently wipe with a soft, dry cloth. Any
remaining stains can be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to
which a small amount of lens-cleaning  uid has been applied. Care should be taken to avoid scratch-
ing the lens or monitor.
x
Table of Contents
Table of Contents
For Your Safety ..................................................................................... ii
IMPORTANT SAFETY INSTRUCTIONS .........................................ii
Safety Notes .......................................................................................iii
NOTICES ..............................................................................................vii
About This Manual .......................................................................... viii
Caring for the Camera .....................................................................ix
Before You Begin
Before You Begin
Symbols and Conventions ..............................................................1
Supplied Accessories ........................................................................1
Parts of the Camera ...........................................................................2
The Command Dial ..........................................................................4
The Command Control ...................................................................5
Camera Displays ................................................................................6
Shooting: Optical View nder ....................................................6
Shooting: Electronic View nder ............................................... 7
Playback: Electronic View nder ...............................................7
Shooting: LCD Monitor ................................................................8
Playback: LCD Monitor ................................................................. 8
First Steps
First Steps
Attaching the Strap ...........................................................................9
Charging the Battery ..................................................................... 11
Inserting the Battery and a Memory Card ........................... 12
Compatible Memory Cards ..................................................... 15
Turning the Camera on and O ................................................ 16
Basic Setup ......................................................................................... 17
Choosing a Display ......................................................................... 18
Focusing the View nder ............................................................. 19
Adjusting Display Brightness .................................................... 19
Bright Ambient Lighting ............................................................. 19
Using the Hybrid View nder ..................................................... 20
The DISP/BACK Button ....................................................................... 21
Optical View nder: Shooting ................................................. 21
Electronic View nder: Shooting............................................ 21
LCD Monitor: Shooting ............................................................. 21
View nder/LCD Monitor: Playback ...................................... 22
Basic Photography and Playback
Basic Photography and Playback
Taking Photographs ....................................................................... 23
Viewing Pictures .............................................................................. 25
Viewing Pictures Full Frame ....................................................... 25
Viewing Photo Information ....................................................... 26
Playback Zoom ............................................................................... 26
Multi-Frame Playback ................................................................... 27
Deleting Pictures ............................................................................. 28
Using the Flash ................................................................................. 29
Macro Mode (Close-ups) .............................................................. 31
Basic Movie Recording and Playback
Basic Movie Recording and Playback
Recording High-De nition (HD) Movies ............................... 32
Viewing Movies ................................................................................ 33
xi
Table of Contents
The Q (Quick Menu) Button
The Q (Quick Menu) Button
Using the Q (Quick Menu) Button ............................................ 34
More on Photography and Playback
More on Photography and Playback
Choosing an Exposure Mode ..................................................... 36
Program AE (P) ................................................................................ 36
Shutter-Priority AE (S) .................................................................. 37
Aperture-Priority AE (A) ............................................................... 38
Manual Exposure (M) .................................................................... 39
Shutter Speed and Aperture ..................................................... 40
Long Time-Exposures (T/B) ......................................................... 41
Time (T) .............................................................................................. 41
Bulb (B) ............................................................................................... 41
White Balance ................................................................................... 42
Sensitivity ........................................................................................... 44
AUTO ................................................................................................ 45
Focus Mode ........................................................................................ 46
MF Assist ......................................................................................... 47
Focus Frame Selection ................................................................. 48
Focus/Exposure Lock ..................................................................... 49
Exposure Compensation .............................................................. 51
Metering .............................................................................................. 52
Using the Self-Timer ....................................................................... 53
Film Simulation ................................................................................ 55
Bracketing ........................................................................................... 56
Multiple Exposures ......................................................................... 57
Continuous Shooting (Burst Mode) ........................................ 58
Viewing Pictures Taken in a Single Burst .............................. 59
Panoramas .......................................................................................... 60
Viewing Panoramas ...................................................................... 62
Recording Pictures in RAW Format ......................................... 63
Creating JPEG Copies of RAW Pictures .................................. 64
The ND Filter ...................................................................................... 65
Image Search ..................................................................................... 66
PhotoBook Assist ............................................................................. 67
Creating a PhotoBook .................................................................. 67
Viewing Photobooks .................................................................... 68
Editing and Deleting Photobooks ........................................... 68
The Fn Button .................................................................................... 69
Saving Settings ................................................................................. 70
Advanced Movie Recording ....................................................... 71
Depth of Field .................................................................................. 71
Before Recording ........................................................................... 71
Using an External Microphone ................................................. 71
xii
Table of Contents
Menus
Menus
Using the Menus: Shooting Mode ........................................... 72
Shooting Menu Options (Photographs) ............................... 72
B SELF-TIMER ............................................................................. 72
N ISO .............................................................................................. 72
O IMAGE SIZE ............................................................................. 72
T IMAGE QUALITY .................................................................... 73
U DYNAMIC RANGE ................................................................. 73
P FILM SIMULATION ................................................................ 73
X FILM SIMULATION BKT ....................................................... 73
t ND FILTER ................................................................................ 73
f COLOR ...................................................................................... 74
q SHARPNESS ............................................................................ 74
r HIGHLIGHT TONE ................................................................. 74
s SHADOW TONE ..................................................................... 74
h NOISE REDUCTION .............................................................. 74
K LONG EXPOSURE NR ........................................................... 74
u SELECT CUSTOM SETTING ................................................ 74
K EDIT/SAVE CUSTOM SETTING ......................................... 74
F Fn BUTTON ............................................................................. 74
v DISP. CUSTOM SETTING ..................................................... 75
c FRAMING GUIDLINE ............................................................ 76
Y WIDE CONVERSION LENS .................................................. 76
c MF ASSIST ............................................................................... 76
d ADVANCED FILTER ............................................................... 77
F AF MODE ................................................................................. 77
C AF ILLUMINATOR .................................................................. 78
k AE/AF-LOCK MODE ............................................................. 78
v AE/AF-LOCK BUTTON ......................................................... 78
G CORRECTED AF FRAME ...................................................... 78
I FLASH ....................................................................................... 79
B RED EYE REMOVAL............................................................... 79
n SAVE ORG IMAGE ................................................................. 79
Shooting Menu Options (Movie Mode) ................................ 80
W MOVIE MODE ......................................................................... 80
P FILM SIMULATION ................................................................ 80
t MIC LE
VEL ADJUSTMENT .................................................. 80
v DISP. CUSTOM SETTING ..................................................... 80
Y WIDE CONVERSION LENS .................................................. 80
Using the Menus: Playback Mode............................................ 81
Playback Menu Options .............................................................. 81
j RAW CONVERSION ............................................................... 81
A ERASE ........................................................................................ 81
G CROP ......................................................................................... 81
e RESIZE ....................................................................................... 82
D PROTECT .................................................................................. 82
C IMAGE ROTATE ...................................................................... 83
E COPY ......................................................................................... 83
B RED EYE REMOVAL............................................................... 84
I SLIDE SHOW ........................................................................... 84
m PHOTOBOOK ASSIST ........................................................... 85
j MARK FOR UPLOAD TO ...................................................... 85
b IMAGE SEARCH ..................................................................... 85
K PRINT ORDER (DPOF) .......................................................... 86
J DISP ASPECT .......................................................................... 86
I PLAYBACK VOLUME ............................................................. 86
xiii
Table of Contents
The Setup Menu ...............................................................................
87
Using the Setup Menu ................................................................. 87
Setup Menu Options .................................................................... 88
F DATE/TIME .............................................................................. 88
N TIME DIFFERENCE ................................................................. 88
L a ................................................................................ 88
R RESET ........................................................................................ 88
o SILENT MODE......................................................................... 88
B FRAME NO. .............................................................................. 89
I FOCUS RING ........................................................................... 89
j FOCUS CHECK ....................................................................... 89
M FOCUS SCALE UNITS ........................................................... 89
b SOUND SET-UP ...................................................................... 90
A SCREEN SET-UP ..................................................................... 90
Z POWER MANAGEMENT ...................................................... 91
G OVF POWER SAVE MODE .................................................. 91
c SHUTTER COUNT .................................................................. 91
J COLOR SPACE ........................................................................ 91
b Eye-Fi TRANSFER .................................................................. 92
K FORMAT ................................................................................... 92
Connections
Connections
Viewing Pictures on a Computer .............................................. 93
Windows: Installing MyFinePix Studio .................................. 93
Macintosh: Installing RAW FILE CONVERTER....................... 95
Importing Pictures or Movies to Mac (Macintosh) ........... 96
Connecting the Camera .............................................................. 97
Printing Pictures via USB ............................................................. 99
Connecting the Camera .............................................................. 99
Printing Selected Pictures .......................................................... 99
Printing the DPOF Print Order ................................................100
Creating a DPOF Print Order....................................................101
WITH DATE s/ WITHOUT DATE .......................................... 102
RESET ALL .....................................................................................103
Viewing Pictures on TV ...............................................................104
xiv
Table of Contents
Technical Notes
Technical Notes
Optional Accessories....................................................................105
Accessories from FUJIFILM .......................................................105
Attaching Adapter Rings ...........................................................107
Attaching Lens Hoods ................................................................107
Attaching Protector Filters .......................................................107
The WCL-X100 Wide Conversion Lens .................................108
Connecting the Camera to Other Devices ......................... 109
Caring for the Camera ................................................................. 110
Storage and Use ...........................................................................110
Traveling .......................................................................................... 110
Troubleshooting
Troubleshooting
Problems and Solutions .............................................................111
Warning Messages and Displays ............................................ 115
Appendix
Appendix
Glossary .............................................................................................118
Memory Card Capacity ...............................................................119
Speci cations ..................................................................................120
Restrictions on Camera Settings ............................................ 125
1
Before You Begin
Before You Begin
Before You Begin
Symbols and Conventions
Symbols and Conventions
The following symbols are used in this manual:
Q This information should be read before use to ensure correct operation.
R Additional information that may be helpful when using the camera.
P Other pages in this manual on which related information may be found.
Menus and other text in the displays are shown in bold. In the illustrations in this manual, displays may
be simpli ed for explanatory purposes.
Supplied Accessories
Supplied Accessories
The following items are included with the camera:
NP-95 rechargeable battery BC-65N battery charger Lens cap USB cable
Owners Manual (this
manual)
• Shoulder strap
• Protective covers (× 2)
CD-ROM Clip attaching tool Metal strap clips (× 2)
2
Parts of the Camera
Parts of the Camera
For more information, refer to the page listed to the right of each item.
1 Shutter button .............................................. 111
2 Exposure compensation dial ........................... 51
3 Shutter speed dial ..........................36, 37, 38, 39
4 Hot shoe ...................................................30, 109
5 Flash ............................................................... 29
6 Microphone (L)................................................ 32
7 View nder window ......................................... 18
8 Strap eyelet ....................................................... 9
9 Focus mode selector ...................................23, 46
10 Aperture ring .............................................38, 39
11 Focus ring ........................................................46
12 Lens ..................................................................ix
13 Front ring ...................................................... 107
14 AF-assist illuminator ....................................... 78
Self-timer lamp ............................................... 53
15 View nder selector ......................................... 20
16 Microphone (R) ............................................... 32
17 ON/OFF switch ............................................... 16
18 Fn (Function) button ...................................... 69
19 Battery latch ................................................... 12
20 Memory card slot ............................................ 13
21 Battery chamber ............................................. 12
22 Eye sensor ....................................................... 18
23 Command control.............................................. 5
24 Connector cover .......................... 71, 97, 99, 104
25 Cable channel cover for DC coupler
26 Battery-chamber cover latch ........................... 12
27 Battery-chamber cover ................................... 12
28 Tripod mount
29 Speaker ........................................................... 33
30 LCD monitor .................................................... 18
31 USB multi-connector ................................. 97, 99
32 HDMI mini connector .................................... 104
3
Before You Begin
Parts of the Camera
33 Diopter adjustment control ............................. 19
34
a (playback) button ..................................... 25
35 AE (autoexposure) button ............................... 52
k (playback zoom in) button ...................26, 27
36 DRIVE button ..........................32, 56, 57, 58, 60
n (playback zoom out) button .................26, 27
37 VIEW MODE button ........................................ 18
38 AFL/AEL (focus lock/exposure) button
.............................................................46, 49, 78
39 Indicator lamp (see below)
40 MENU/OK button ............................................. 4
Control lock ....................................................... 4
41 Command dial ................................................... 4
42 Q (quick menu) button ...............................19, 34
43 DISP (display)/BACK button ........................... 21
o (silent mode) button .................................. 5
The Indicator Lamp
The Indicator Lamp
The indicator lamp shows camera status as follows:
Indicator lamp
Indicator lamp
Camera status
Camera status
Glows green
Glows green Focus locked.
Blinks green
Blinks green Blur, focus, or exposure warning. Picture can be taken.
Blinks green and orange
Blinks green and orange Recording pictures. Additional pictures can be taken.
Glows orange
Glows orange Recording pictures. No additional pictures can be taken at this time.
Blinks orange
Blinks orange Flash charging;  ash will not  re when picture is taken.
Blinks red
Blinks red Lens or memory error.
Indicator lamp
R Warnings may also appear in the display (P 5).
4
Parts of the Camera
The Command Dial
The Command Dial
Rotate the command dial or press it up (
q
), right (
w
), down (
e
), or left (
r
) to highlight items and
press MENU/OK (
t
) to select.
The command dial also serves as the following buttons:
q
: b (delete) button (P 28)/AF (autofocus) button (P 48)
w
:
N ( ash) button (P 29)
e
: WB (white balance) button (P 42)
r
: F (macro) button (P 31)
You can also rotate the command dial to choose a combination of shutter speed and aperture
(program shift; P 36) or to adjust shutter speed in increments of 
/
 EV (P 37, 39).
Control Lock
Control Lock
To lock the Q button and prevent the command dial being used as an AF,  ash, white balance, or macro button,
press MENU/OK until X is displayed. This prevents accidental operation of these controls during shooting. The
controls can be unlocked by pressing MENU/OK until X is no longer displayed.
5
Before You Begin
Parts of the Camera
The Command Control
The Command Control
Pressing the command control left or right per-
forms the same function as rotating the com-
mand dial. It can also be used to choose a com-
bination of shutter speed and aperture (program
shift; P 36) or to adjust aperture in increments of
/
 EV (P 38, 39).
You can also press the center of the command
control to zoom in on the focus area selected in
the electronic view nder or LCD monitor, or to
zoom in on the active focus point during playback
or (if CONTINUOUS is selected for A SCREEN
SET-UP> IMAGE DISP. in the setup menu; P 90)
image review (press again to cancel zoom).
Silent Mode
Silent Mode
In situations in which camera sounds or lights may
be unwelcome, press the DISP/BACK button until the
o icon is displayed (about a second), or select ON
for o SILENT MODE in the setup menu (P 88). The
camera speaker,  ash, and AF-assist illuminator/self-
timer lamp turn o and  ash and volume settings
can not be adjusted (note that silent mode can not
be enabled or disabled while movie playback is in
progress). Press the DISP/BACK button again to re-
sume normal operation.
6
Parts of the Camera
Camera Displays
Camera Displays
The following types of indicator may be displayed during shooting and playback. In the description
that follows, all available indicators are shown for illustrative purposes; the indicators actually displayed
vary with camera settings.
Shooting: Optical View nder
2000 F5.6
100
P
200
100
1 Manual focus indicator .................................... 46
2 Flash mode ..................................................... 29
3 Metering ......................................................... 52
4 White balance ................................................. 42
5 Film simulation ............................................... 55
6 Dynamic range ................................................ 73
7 ND (Neutral Density)  lter indicator ................ 65
8 Internal memory indicator
*
9 Number of available frames .......................... 119
10 Image quality and size ...............................72, 73
11 Battery level .................................................... 16
12 Focus frame ..............................................49, 111
13 Virtual horizon ................................................ 75
14 Temperature warning.................................... 117
15 Bright frame
16 Distance indicator ........................................... 46
17 Sensitivity ....................................................... 44
18 Aperture.........................................36, 38, 39, 71
19 Shutter speed .......................................36, 37, 39
20 Shooting mode ............................................... 36
21 Histogram ....................................................... 22
22 Exposure compensation/
exposure indicator......................................39, 51
*
a: indicates that no memory card is inserted and that
pictures will be stored in the camera’s internal memory
(P 13).
7
Before You Begin
Parts of the Camera
Shooting: Electronic View nder
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10
F
100
P
2000
F5.6
200
1 Flash mode ..................................................... 29
2 Macro (close-up) mode ................................... 31
3 Self-timer indicator ......................................... 53
4 Continuous mode ............................................ 58
5 White balance ................................................. 42
6 Film simulation ............................................... 55
7 Dynamic range ................................................ 73
8 Focus frame ................................................24, 49
9 Internal memory indicator
*
10 Number of available frames .......................... 119
11 Image quality and size ...............................72, 73
12 Temperature warning.................................... 117
13 Blur warning ......................................3, 113, 115
14 ND (Neutral Density)  lter indicator ................ 65
15 Wide converter lens ...................................... 108
16 Eye-Fi upload .................................................. 92
17 Silent mode indicator ...................................5, 88
18 Distance indicator ........................................... 46
19 Battery level .................................................... 16
20 Sensitivity ....................................................... 44
21 Monitor sunlight mode ................................... 19
22 Focus warning ....................................3, 113, 115
23 Aperture.........................................36, 38, 39, 71
24 Shutter speed .......................................36, 37, 39
25 Metering ......................................................... 52
26 Shooting mode ............................................... 36
27 Manual focus indicator .................................... 46
28 Exposure compensation/
exposure indicator......................................39, 51
29 Histogram ....................................................... 22
30 Virtual horizon ................................................ 75
31 Depth-of- eld preview ................................... 38
*
a: indicates that no memory card is inserted and that
pictures will be stored in the camera’s internal memory
(P 13).
Playback: Electronic View nder
1 / 1000 F4.5
-
1
2
/
3
200
12 / 31/2050 10 :00
AM
3:2
F
100-0001
YouTube
1 Rating ............................................................. 25
2 Red-eye removal indicator .............................. 84
3 Advanced  lter ................................................ 77
4 Silent mode indicator ...................................5, 88
5 Gift image ....................................................... 25
6 Frame number ................................................ 89
7 Eye-Fi upload complete ................................... 92
8 Eye-Fi upload .................................................. 92
9 Playback mode indicator ................................. 25
10 Mark for upload to .......................................... 85
11 Photobook assist indicator .............................. 67
12 DPOF print indicator ...................................... 101
13 Protected image ..............................................82
8
Parts of the Camera
Shooting: LCD Monitor
2000
1F5.6
000100
P
200
F
1 Flash mode ..................................................... 46
2 Macro (close-up) mode ................................... 31
3 Metering ......................................................... 52
4 Continuous mode ............................................ 58
5 Silent mode indicator ...................................5, 88
6 ND (Neutral Density)  lter indicator ................ 65
7 Internal memory indicator
*
8 Wide converter lens ...................................... 108
9 Number of available frames .......................... 119
10 Monitor sunlight mode ................................... 19
11 Image quality and size ...............................72, 73
12 Dynamic range ................................................ 73
13 Film simulation ............................................... 55
14 White balance ................................................. 42
15 Battery level .................................................... 16
16 Temperature warning.................................... 117
17 Sensitivity ....................................................... 44
18 Aperture.........................................36, 38, 39, 71
19 Focus frame/focus point .................................. 48
20 Shutter speed .......................................36, 37, 39
21 Shooting mode ............................................... 36
22 Focus mode ..................................................... 46
23 Self-timer indicator ......................................... 53
24 Exposure compensation/
exposure indicator......................................39, 51
*
a: indicates that no memory card is inserted and that
pictures will be stored in the camera’s internal memory
(P 13).
Playback: LCD Monitor
1 / 1000 F4.5
-
1
2
/
3
200
12 / 31/2050 10 :00
AM
3:2
F
100-0001
YouTube
1 Rating ............................................................. 25
2 Red-eye removal indicator .............................. 84
3 Advanced  lter ................................................ 77
4 Silent mode indicator ...................................5, 88
5 Gift image ....................................................... 25
6 Frame number ................................................ 89
7 Eye-Fi upload complete ................................... 92
8 Eye-Fi upload .................................................. 92
9 Playback mode indicator ................................. 25
10 Mark for upload to .......................................... 85
11 Photobook assist indicator .............................. 67
12 DPOF print indicator ...................................... 101
13 Protected image ..............................................82
9
First Steps
First Steps
First Steps
Attaching the Strap
Attaching the Strap
Attach the strap clips to the camera and then attach the strap.
1
Open a strap clip.
Use the clip attaching tool to open a strap clip,
making sure that the tool and clip are in the
orientations shown.
Q Keep the tool in a safe place. You will need it to
open the strap clips when removing the strap.
2
Place the strap clip on an eyelet.
Hook the strap eyelet in the clip opening. Re-
move the tool, using the other hand to keep
the clip in place.
3
Pass the clip through the eyelet.
Rotate the clip fully through
the eyelet until it clicks
closed.
4
Attach a protective cover.
Place a protective cover over the eyelet as
shown, with the black side of the cover toward
the camera. Repeat Steps 1–4 for the second
eyelet.
10
Attaching the Strap
5
Insert the strap.
Insert the strap through a protective cover
and strap clip.
6
Fasten the strap.
Fasten the strap as shown. Repeat Steps 5–6
for the second eyelet.
Q To avoid dropping the camera, be sure the strap is
correctly secured.
11
First Steps
Charging the Battery
Charging the Battery
The battery is not charged at shipment. Charge the battery before use.
1
Place the battery in the charger.
Insert the battery in the orientation indicated
by the
DFC labels.
Battery charger
DFC
label
Battery
DFC label
Charge
lamp
Arrow
The camera uses an NP-95 rechargeable battery.
R Attach the supplied adapter
before charging the battery
(the adapter is attached at
shipment).
Adapter
2
Plug the charger in.
Plug the charger into a power outlet. The
charging indicator will light.
The Charging Indicator
The Charging Indicator
The charging indicator shows battery charge sta-
tus as follows:
Charging
Charging
indicator
indicator
Battery status
Battery status
Action
Action
O
O
Battery not
Battery not
inserted.
inserted.
Insert the battery.
Insert the battery.
Battery fully
Battery fully
charged.
charged.
Remove the battery.
Remove the battery.
On
On
Battery charging.
Battery charging.
Blinks
Blinks
Battery fault.
Battery fault.
Unplug the charger
Unplug the charger
and remove the
and remove the
battery.
battery.
3
Charge the battery.
Remove the battery when charging is com-
plete. See the speci cations (P 123) for
charging times (note that charging times in-
crease at low temperatures).
Q Unplug the charger when it is not in use.
12
Inserting the Battery and a Memory Card
Inserting the Battery and a Memory Card
Although the camera can store pictures in internal memory, optional SD, SDHC, and SDXC memory
cards (sold separately) can be used to store additional pictures. After charging the battery, insert the
battery and memory card as described below.
1
Open the battery-chamber cover.
Slide the battery-chamber latch as shown and
open the battery-chamber cover.
Q Do not open the battery-chamber cover when
the camera is on. Failure to observe this precau-
tion could damage image  les or memory cards.
Q Do not use excessive force when handling the
battery-chamber cover.
2
Insert the battery.
Align the orange stripe on the battery with the
orange battery latch and slide the battery into
the camera, keeping the battery latch pressed
to one side. Con rm that the battery is se-
curely latched.
Battery latch
Orange stripe
Q Insert the battery in the correct orientation. Do
not use force or attempt to insert the battery up-
side down or backwards. The battery will slide in
easily in the correct orientation.
13
First Steps
Inserting the Battery and a Memory Card
3
Insert the memory card.
Holding the memory
card in the orientation
shown at right, slide
it in until it clicks into
place at the back of
the slot.
Click
Q Be sure card is in the correct orientation; do not
insert at an angle or use force. If the memory
card is not correctly inserted or no memory card
is inserted, a will appear in the display and in-
ternal memory will be used for recording and
playback.
Q SD/SDHC/SDXC memo-
ry cards can be locked,
making it impossible to
format the card or to
record or delete images.
Before inserting a memory card, slide the write-
protect switch to the unlocked position.
4
Close the battery-chamber cover.
Slide the battery-chamber latch as shown and
close the battery-chamber cover.
Write-protect switch
14
Inserting the Battery and a Memory Card
Removing the Battery and Memory Card
Removing the Battery and Memory Card
Before removing the battery or memory card, turn
the camera o and open the battery-chamber cover.
To remove the battery, press
the battery latch to the side,
and slide the battery out of
the camera as shown.
Battery latch
To remove the memory card,
press it in and release it slowly.
The card can then be removed
by hand. When a memory card
is removed, the card could be
ejected too quickly. Use your  nger to hold it and gen-
tly release the card.
Q
Q
Batteries
Batteries
Remove dirt from the battery terminals with a clean,
dry cloth. Failure to observe this precaution could
prevent the battery from charging.
Do not a x stickers or other objects to the battery.
Failure to observe this precaution could make it im-
possible to remove the battery from the camera.
Do not short the battery terminals. The battery could
overheat.
Read the cautions in The Battery and Power Supply
(
P iv).
Use only battery chargers designated for use with the
battery. Failure to observe this precaution could re-
sult in product malfunction.
Do not remove the labels from the battery or attempt
to split or peel the outer casing.
The battery gradually loses its charge when not in
use. Charge the battery one or two days before use.
15
First Steps
Inserting the Battery and a Memory Card
Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the cam-
era. A complete list of approved memory cards is available at http://www.fujifilm.com/support/digital_
cameras/compatibility/. Operation is not guaranteed with other cards. The camera can not be used
with xD-Picture Cards or MultiMediaCard (MMC) devices.
Q
Q
Memory Cards
Memory Cards
Do not turn the camera o or remove the memory card while the memory card is being formatted or data are
being recorded to or deleted from the card. Failure to observe this precaution could damage the card.
Format memory cards before  rst use, and be sure to reformat all memory cards after using them in a computer
or other device. For more information on formatting memory cards, see page 92.
Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card,
seek medical assistance immediately.
miniSD or microSD adapters that are larger or smaller than the standard dimensions of an SD/SDHC/SDXC card
may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do
not forcibly remove the card.
Do not a x labels to memory cards. Peeling labels can cause camera malfunction.
Movie recording may be interrupted with some types of SD/SDHC/SDXC memory card. Use a H card or
better when shooting HD movies.
The data in internal memory may be erased or corrupted when the camera is repaired. Please note that the
repairer will be able to view pictures in internal memory.
Formatting a memory card in the camera creates a folder in which pictures are stored. Do not rename or delete
this folder or use a computer or other device to edit, delete, or rename image  les. Always use the camera to
delete pictures; before editing or renaming  les, copy them to a computer and edit or rename the copies, not
the originals. Renaming the  les on the camera can cause problems during playback.
16
Turning the Camera on and O
Turning the Camera on and O
Rotate the ON/OFF switch to ON to turn the camera on. Select OFF to turn
the camera o .
R Press the a button to start playback. Press the shutter button halfway to
return to shooting mode.
R The camera will turn o automatically if no operations are performed for the
length of time selected for Z POWER MANAGEMENT > AUTO POWER OFF (P 91). To reactivate the camera
after it has turned o automatically, press the shutter button halfway or turn the ON/OFF switch to OFF and then
back to ON.
R For information on other power saving and startup options, see page 91.
Q Fingerprints and other marks on the lens or view nder can a ect pictures or the view through the view nder.
Keep the lens and view nder clean.
Battery Level
Battery Level
After turning the camera on, check the battery level in the display.
Indicator
Indicator
Description
Description
D (white)
Battery partially discharged.
C (white)
Battery more than half discharged
B (red)
Low battery. Charge as soon as possible.
A (blinks red)
Battery exhausted. Turn camera o and recharge battery.
P
17
First Steps
Basic Setup
Basic Setup
A language-selection dialog is displayed the  rst time the camera is turned on. Set up the camera
as described below (you can reset the clock or change languages at any time using the F DATE/
TIME or L a options in the setup menu; for information on displaying the setup menu, see
page 88).
1
Choose a language.
START MENU
NOSET
ENGLISH
FRANCAIS
DEUTSCH
Highlight a language and press MENU/OK.
R Press DISP/BACK to skip the current step. Any steps you skip will be dis-
played the next time the camera is turned on.
2
Set the date and time.
NOSET
YY. MM. DD
DATE / TIME NOT SET
1. 1
2013
12
:
00
AM
2012
2011
2015
2014
Press the command dial left or right to highlight the year, month, day,
hour, or minute and press up or down to change. To change the order
in which the year, month, and day are displayed, highlight the date
format and press the command dial up or down. Press MENU/OK to exit
to shooting mode when settings are complete.
R If the battery is removed for an extended period, the camera clock will be reset and the language-selection
dialog will be displayed when the camera is turned on.
18
Choosing a Display
Choosing a Display
The camera is equipped with a hybrid optical/electronic view nder
(OVF/EVF) and an LCD monitor (LCD). Press VIEW MODE to choose a dis-
play.
LCD
OVF/EVF
OVF/EVF
LCD
Automatic display selection
using eye sensor
View nder only LCD monitor only
Automatic Display Selection
Automatic Display Selection
The view nder turns on automatically when you put your eye to the view nder, and the
LCD monitor turns on when you take your eye away (note that the eye sensor may respond
to objects other than your eye or to light shining directly on the sensor).
Eye sensor
19
First Steps
Choosing a Display
Focusing the View nder
Focusing the View nder
The camera is equipped with diopter adjustment
in the range –2 to +1 m
–1
to accommodate indi-
vidual di erences in vision. Rotate the diopter
adjustment control until the view nder display is
in sharp focus.
Diopter adjustment control
Adjusting Display Brightness
Adjusting Display Brightness
The brightness of the view nder and LCD monitor
can be adjusted using the A SCREEN SET-UP>
EVF/LCD BRIGHTNESS option in the setup menu
(P
90
).
Bright Ambient Lighting
Bright Ambient Lighting
Re ections and glare caused by bright ambient
lighting may make it hard to see the display in
the monitor, particularly when the camera is used
outdoors. This can be addressed by holding the Q
button to trigger outdoor mode. Outdoor mode
can also be enabled using the A SCREEN SET-
UP> MONITOR SUNLIGHT MODE option in the
setup menu (P 90).
20
Choosing a Display
Using the Hybrid View nder
Using the Hybrid View nder
Use the view nder selector to
choose between optical and
electronic view nders.
2000 F5.6
P
200
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10
P
2000
F5. 6
200
Optical view nder display Electronic view nder display
Choosing a Display
Choosing a Display
Choose a display according to the task.
Display
Display
Description
Description
Optical
Optical
view nder
view nder
(OVF)
(OVF)
This display is immune from digital video
e ects and allows the subject to be viewed
directly with no display lag. Subjects are
always in focus, allowing you to check their
expression at any time, while a  eld of view
slightly larger than that of the lens makes
it easier to locate your subject without re-
moving your eye from the view nder. The
view nder window is however at a slight
distance from the lens, with the result that
the display in the view nder may di er
slightly from the  nal photograph due to
parallax.
Electronic
Electronic
view nder
view nder
(EVF)
(EVF)
This display shows the view through the
lens and has exactly the same  eld of view,
allowing you to frame your subjects pre-
cisely and preview focus, depth of  eld, ex-
posure, and white balance (although there
may be a slight display lag). It can also be
used to view photographs after shooting.
LCD monitor
LCD monitor
This display is identical to the electronic
view nder, except that its large size makes
it easier to view shooting indicators and the
view through the lens. It may however be
di cult to see in bright light.
21
First Steps
The
The
DISP/BACK
DISP/BACK
Button
Button
The DISP/BACK button controls the display of indicators in the view nder and LCD monitor.
Optical View nder: Shooting
2000 F5.6
P
200
100
2000 F5.6
P
200
Standard display Custom display
Electronic View nder: Shooting
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10
P
2000
F5. 6
200
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10
F
100
P
2000
F5. 6
200
Standard display Custom display
LCD Monitor: Shooting
Detailed display Standard display
2000
1F5.6
000100
P
200
F
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10
P
2000
F5. 6
200
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10
F
100
P
2000
F5. 6
200
Custom display
Custom Display
Custom Display
Choose items for display using v DISP. CUSTOM SETTING in the shooting menu (P 75):
Framing grid Exposure (shutter speed, aperture, and sensitivity) Film simulation
Virtual horizon Exposure compensation Dynamic range
Focus distance (autofocus) Metering Number of exposures remaining/media
Focus distance (manual focus) Flash mode Image quality and size
Histogram White balance Battery level
R See pages 6 8 for the locations of these items in the displays.
22
The DISP/BACK Buttion
View nder/LCD Monitor: Playback
Indicators displayed Indicators hidden Favorites Photo information
1 /1000 F4 . 5
-
1
2
/
3
200
12 /31 /2050 10: 00
AM
3:2
F
100-0001
100-0001
100-0001
3
12 /31 /2050 10: 00
AM
:
:
:
: OFF
ISO
200
1/1000
F
4.5
2
3
-
1
12 /31 /2050 10: 00
AM
100-0001
3:2
F
Q The optical view nder can not be used for playback.
Histograms
Histograms
Histograms show the distribution of tones in the im-
age. Brightness is shown by the horizontal axis, the
number of pixels by the vertical axis.
Shadows Highlights
No. of pixels
Pixel brightness
Optimal exposure: Pixels are distrib-
uted in an even curve through-
out the tone range.
Overexposed: Pixels are clustered
on the right side of the graph.
Underexposed: Pixels are clustered
on the left side of the graph.
23
Basic Photography and Playback
Basic Photography and Playback
Basic Photography and Playback
Taking Photographs
Taking Photographs
This section describes how to take pictures using program AE (mode P). For information on S, A, and
M modes, see page 36.
1
Select program AE.
Set shutter speed and aperture to A (shutter
speed is set by rotating the shutter speed dial).
P will appear in the display.
2000 F5.6
P
200
P
2000
F5. 6
200
Optical view nder EVF/LCD
The Q Button
The Q Button
The Q button can be used to view and adjust
camera settings (P 34).
2
Select single AF.
Rotate the focus mode selector to AF-S (P 46).
3
Ready the camera.
Hold the camera steady
with both hands and brace
your elbows against your
sides. Shaking or unsteady
hands can blur your shots.
To prevent pictures that
are out of focus or too dark
(underexposed), keep your
ngers and other objects
away from the lens,  ash,
and AF-assist illuminator.
24
Taking Photographs
4
Focus.
Frame the picture with your subject in the center of the display and press the shutter
button halfway to focus.
R If the subject is poorly lit, the AF-assist illuminator may light (P 78).
If the camera is able to focus, it will beep twice and focus area will glow green. Focus and exposure will
lock while the shutter button is pressed halfway.
If the camera is unable to focus, the focus frame will turn red, and s will be displayed. If the subject
is close to the camera, select macro mode and try again (P31).
5
Shoot.
Smoothly press the shutter button the rest of the way down to take the picture.
25
Basic Photography and Playback
Viewing Pictures
Viewing Pictures
Viewing Pictures Full Frame
Viewing Pictures Full Frame
Pictures can be viewed in the view nder or LCD monitor. When taking important pictures, take a test
shot and check the results.
To view pictures full frame, press a.
1 /1000 F4 . 5
-
1
2
/
3
200
100-0001
100-0001
Additional pictures can be viewed by rotating the command dial or pressing it left or right.
Press or rotate right to view pictures in the order recorded, left to view pictures in reverse
order. Keep the dial pressed to scroll rapidly to the desired frame.
R Pictures taken using other cameras are indicated by a m (“gift image”) icon during playback.
Favorites: Rating Pictures
Favorites: Rating Pictures
To rate the current picture, press DISP/BACK and press the command dial up and down to select from zero to  ve
stars.
26
Viewing Pictures
Viewing Photo Information
Viewing Photo Information
Photo information can be viewed by press-
ing the command control right.
1 / 1000 F4 . 5
-
1
2
/
3
200
12 / 31/ 2050 10:00
AM
3:2
F
100-0001
D-RANGE
:
100
COLOR
: STD
HIGH LIGHT TONE
: STD
SHADOW TONE
SHARPNESS
: STD
: STD
FILM SIM.
: PROVIA
WHITE BALANCE
: AUTO
Basic data Details, page 1
COLOR SPACE
: sRGB
METERING
: PATTERN
EXPOSURE MODE
: PROGRAM
LENS
:
18
mm
F
2.0
FOCAL LENGTH
:
18
mm
FLASH MODE
: OFF
Active focus point (“+”) Details, page 2
R Rotate the command dial to view other images.
Zooming in on the Focus Point
Zooming in on the Focus Point
Press the center of the command
control to zoom in on the focus
point. Press the center of the com-
mand control again to return to
full-frame playback.
Playback Zoom
Playback Zoom
Press k to zoom in on the current picture, n to
zoom out. When the picture is zoomed in, the
command dial can be used to view areas of the
image not currently visible in the display. Press
DISP/BACK or MENU/OK to exit zoom.
Zoom indicator
Navigation window shows
portion of image currently
displayed
R The maximum zoom ratio varies with image size
(P 72). Playback zoom is not available with cropped
or resized copies saved at a size of a.
27
Basic Photography and Playback
Viewing Pictures
Multi-Frame Playback
Multi-Frame Playback
To change the number of images displayed, press n when a picture is displayed full frame.
Press n to view
more images.
100-0001
100-0001
Press k to view
fewer images.
Use the command dial to highlight images and press MENU/OK to view the highlighted image full frame.
In the nine- and hundred-frame displays, press the command dial up or down to view more pictures.
28
Deleting Pictures
Deleting Pictures
To delete individual pictures, multiple selected pictures, or all pictures,
press the command dial up (b), and choose from the options below. Note
that deleted pictures can not be recovered. Copy important pictures to a
computer or other storage device before proceeding.
BACKSET
ERASE
ALL FRAMES
SELECTED FRAMES
FRAME
Option
Option
Description
Description
FRAME
FRAME
Press the command dial left or right to scroll through pictures and press MENU/OK to delete the current pic-
ture (a con rmation dialog is not displayed).
SELECTED FRAMES
SELECTED FRAMES
Highlight pictures and press MENU/OK to select or deselect (pictures in photobooks or print orders are shown
by S). When the operation is complete, press DISP/BACK to display a con rmation dialog, then highlight OK
and press MENU/OK to delete the selected pictures.
ALL FRAMES
ALL FRAMES
A con rmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures
(if a memory card is inserted, only the pictures on the memory card will be a ected; the pictures in internal
memory are only deleted if no memory card is inserted). Pressing DISP/BACK cancels deletion; note that any
pictures deleted before the button was pressed can not be recovered.
R Protected pictures can not be deleted. Remove protection from any pictures you wish to delete (P 82).
R Pictures can also be deleted by A ERASE from playback menu.
R If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete
the pictures.
29
Basic Photography and Playback
Using the Flash
Using the Flash
Use the built-in  ash for additional lighting when shooting at night or indoors under low light.
To choose a  ash mode, press the command dial right (N) to display the following
options, then rotate the dial or press it left or right to highlight an option and press
MENU/OK to select.
Mode
Mode
Description
Description
AUTO
AUTO
(AUTO FLASH)
(AUTO FLASH)
/
/
K
K
(RED EYE REDUCTION)
(RED EYE REDUCTION)
*
*
The  ash  res when required. Recommended in most situations.
N
N
(FORCED FLASH)
(FORCED FLASH)
/
/
L
L
(FORCED FLASH)
(FORCED FLASH)
*
*
The  ash  res whenever a picture is taken. Use for backlit subjects or for natural
coloration when shooting in bright light.
P
P
(SUPPRESSED FLASH)
(SUPPRESSED FLASH)
The  ash does not  re even when the subject is poorly lit. Use of a tripod is rec-
ommended.
O
O
(SLOW SYNCHRO)
(SLOW SYNCHRO)
/
/
M
M
(RED EYE & SLOW)
(RED EYE & SLOW)
*
*
Capture both the main subject and the background under low light (note that
brightly lit scenes may be overexposed).
D
D
(COMMANDER)
(COMMANDER)
The built-in  ash can be used to control optional remote  ash units.
C
C
(EXTERNAL FLASH)
(EXTERNAL FLASH)
Select when using optional third-party  ash units.
P
AUTO FLASH
According to
shooting conditions
* Red-eye removal (K, L, or M) is available in these modes when ON is selected for B RED
EYE REMOVAL in the shooting menu (P 79). Red-eye removal minimizes red-eye caused
when light from the  ash is re ected from the subject’s retinas as shown in the illustration
at right.
30
Using the Flash
R If p is displayed when the shutter button is pressed halfway, the  ash will  re when the photo is taken.
R Except in commander mode, the  ash may  re several times with each shot. Do not move the camera until
shooting is complete.
R Remove lens hoods to prevent shadows in photos taken with the  ash.
Q Flash is not  red in silent mode.
Flash Sync Speed
Flash Sync Speed
The  ash will synchronize with the shutter at shutter speeds of 
/
 s or slower.
Optional Flash Units
Optional Flash Units
The camera can also be used with optional FUJIFILM shoe-mounted  ash units. Do not use third-party  ash
units that apply over high voltages to the camera hot shoe.
Aperture, Sensitivity, and Flash Range
Aperture, Sensitivity, and Flash Range
Flash range varies with sensitivity and aperture.
Aperture at sensitivity of
Aperture at sensitivity of
Range
Range
200
200
400
400
800
800
1600
1600
3200
3200
6400
6400
m
m
ft.
ft.
2
2
0.5
0.5
18
18
1.6 59
1.6 – 59
2
2
2.8
2.8
0.5
0.5
13
13
1.6 42
1.6 – 42
2
2
2.8
2.8
4
4
0.5
0.5
9.0
9.0
1.6 29
1.6 – 29
2
2
2.8
2.8
4
4
5.6
5.6
0.5
0.5
6.4
6.4
1.6 20
1.6 – 20
2
2
2.8
2.8
4
4
5.6
5.6
8
8
0.5
0.5
4.5
4.5
1.6 14
1.6 – 14
2
2
2.8
2.8
4
4
5.6
5.6
8
8
11
11
0.5
0.5
3.2
3.2
1.6 10
1.6 – 10
2.8
2.8
4
4
5.6
5.6
8
8
11
11
16
16
0.5
0.5
2.3
2.3
1.6 7.5
1.6 – 7.5
4
4
5.6
5.6
8
8
11
11
16
16
0.5
0.5
1.6
1.6
1.6 5.2
1.6 – 5.2
5.6
5.6
8
8
11
11
16
16
0.5
0.5
1.1
1.1
1.6 3.6
1.6 – 3.6
8
8
11
11
16
16
0.5
0.5
0.8
0.8
1.6 2.6
1.6 – 2.6
31
Basic Photography and Playback
Macro Mode (Close-ups)
Macro Mode (Close-ups)
To focus at distances as close as 10 cm/4 in., press the command dial left (F) and
select F. If the optical view nder is on, the camera will automatically switch to the
electronic view nder (because of parallax, the camera will not focus at distances of
less than 80 cm/2.6 ft. when the optical view nder is used). To exit macro mode,
press the command dial left and select OFF.
P
OFF
R The LCD monitor and electronic view nder can be used to focus at short ranges when macro mode is not
selected, but the time needed to focus increases.
R The shadow cast by the lens may appear in photographs taken with the  ash at distances under 50 cm/19.6 in.
Turn the  ash o or increase the distance to the subject.
32
Basic Movie Recording and Playback
Basic Movie Recording and Playback
Recording High-De nition (HD) Movies
Recording High-De nition (HD) Movies
The camera can be used to record short high-de nition movies. Sound is recorded in stereo via the
built-in microphone; during recording, do not cover the microphone or use the view nder selector,
which is located next to the microphone.
1
Set aperture to A.
2
Press the DRIVE button to display drive options.
Press the command dial up or down to high-
light F (MOVIE) and press MENU/OK.
MOVIE
3
Press the shutter button all
the way down to start re-
cording.
4
Press the shutter button all
the way down again to end
recording. Recording ends
automatically or when
memory is full.
R Exposure and white balance are adjusted automati-
cally throughout recording. The color and bright-
ness of the image may vary from those displayed
before recording begins.
R The indicator lamp lights while movies are being
recorded.
Q The microphone may pick up lens noise and other
sounds made by the camera during recording.
Q Vertical or horizontal streaks may appear in movies
containing very bright subjects. This is normal and
does not indicate a malfunction.
Q If the optical view nder is on, the camera will auto-
matically switch to the electronic view nder.
The Q Button
The Q Button
The Q button can be used to view and adjust camera
settings (P 34).
33
Basic Movie Recording and Playback
Viewing Movies
Viewing Movies
During playback, movies are displayed as shown at right. The following operations
can be performed while a movie is displayed:
Operation
Operation
Description
Description
Start/pause playback
Start/pause playback
Press the command dial down to start playback. Press again to pause. While playback
is paused, you can press the command dial left or right to rewind or advance one
frame at a time.
End playback
End playback Press the command dial up to end playback.
Adjust speed
Adjust speed Press the command dial left or right to adjust playback speed during playback.
Adjust volume
Adjust volume
Press MENU/OK to pause playback and display volume controls. Press the com-
mand dial up or down to adjust the volume; press MENU/OK again to resume play-
back. Volume can also be adjusted using the I PLAYBACK VOLUME option in
the playback menu (P 86).
Movie icon
100-0006
100-0006
PLAY
Progress is shown in the display during playback.
Q Do not cover the speaker during playback.
Q Sound is not played back in silent mode.
Progress bar
PAUSESTOP
15
s
Playback Speed
Playback Speed
Press the command dial left or right to adjust playback speed during playback. Speed is shown
by the number of arrows (M or N).
Arrow
PAUSESTOP
15
s
34
The Q (Quick Menu) Button
The Q (Quick Menu) Button
Using the Q (Quick Menu) Button
Using the Q (Quick Menu) Button
Press Q for quick access to the following items. For more information on the options available, see the
pages listed below.
ISO
SET
3200
BASIC
3:2
FINE
1
u SELECT CUSTOM SETTING ...................... 70
2
N ISO ........................................................... 44
3
U DYNAMIC RANGE ................................... 73
4
D WHITE BALANCE .................................... 42
5
h NOISE REDUCTION ................................. 74
6
O IMAGE SIZE ............................................. 72
7
T IMAGE QUALITY ..................................... 73
8
P FILM SIMULATION ................................. 55
9
r HIGHLIGHT TONE ................................... 74
10
s SHADOW TONE ....................................... 74
11
f COLOR ..................................................... 74
12
q SHARPNESS ............................................ 74
13
B SELF-TIMER ............................................ 53
14
F AF MODE ................................................. 77
15
p FLASH MODE .......................................... 29
16
J EVF/LCD BRIGHTNESS............................ 90
1
Press Q to display the quick menu during shooting.
2
Use the command dial to highlight items and rotate the command control to
change.
3
Press Q to exit when settings are complete.
R For quick access to custom settings banks, press and hold the Q button while the quick menu is displayed.
35
The Q (Quick Menu) Button
The Q (Quick Menu) Button
Movie Mode
Movie Mode
In movie mode, the quick menu contains the following items:
W MOVIE MODE .......................................... 80
P FILM SIMULATION.................................. 55
D WHITE BALANCE .................................... 42
J EVF/LCD BRIGHTNESS............................ 90
FILM SIMULATION
SET
36
More on Photography and Playback
More on Photography and Playback
Choosing an Exposure Mode
Choosing an Exposure Mode
The camera o ers a choice of program AE (P), shutter-priority AE (S), aperture-priority AE (A), and
manual exposure (M) modes.
Program AE (P)
Program AE (P)
To allow the camera to adjust both shutter speed and aperture
for optimal exposure, rotate the aperture ring and shutter speed
dial to A. P will appear in the display.
Q If the subject is outside the metering range of the camera, the shutter
speed and aperture displays will show “– –”.
2000 F5.6
P
200
P
2000
F5. 6
200
Optical view nder EVF/LCD
Program Shift
Program Shift
If desired, you can rotate the command dial or press the command control left or
right to choose other combinations of shutter speed and aperture without alter-
ing exposure (program shift). Program shift is not available when a  ash is used,
AUTO is selected for U DYNAMIC RANGE in the shooting menu (P 73), or an auto
option is selected for N ISO in the shooting menu (P 44).
P
2000
F5. 6
200
Shutter speed
Aperture
37
More on Photography and Playback
Choosing an Exposure Mode
Shutter-Priority AE (S)
Shutter-Priority AE (S)
To adjust shutter speed manually while letting the camera select
aperture for optimal exposure, rotate the aperture ring to A and
use the shutter speed dial. S will appear in the display.
Q If the correct exposure can not be achieved at the selected shutter
speed, aperture will be displayed in red when the shutter button is
pressed halfway. Adjust shutter speed until the correct exposure is
achieved.
Q If the subject is outside the metering range of the camera, the aper-
ture display will show “– –”.
2000 F5.6
S
200
S
2000
F5. 6
200
Optical view nder EVF/LCD
R Shutter speed can also be adjusted in increments of 
/
EV by rotating
the command dial.
38
Choosing an Exposure Mode
Aperture-Priority AE (A)
Aperture-Priority AE (A)
To adjust aperture manually while letting the camera select shut-
ter speed for optimal exposure, rotate the shutter speed dial to A
and adjust aperture. A will appear in the display.
Q If the correct exposure can not be achieved at the selected aper-
ture, the shutter speed will be displayed in red when the shutter but-
ton is pressed halfway. Adjust aperture until the correct exposure is
achieved.
Q If the subject is outside the metering range of the camera, the shutter
speed display will show “– –”.
Q The slowest shutter speed available when ON is selected for G OVF
POWER SAVE MODE is 
/
 s (P 91).
2000 F5.6 200
A
A
2000
F5. 6
200
Optical view nder EVF/LCD
R Aperture can also be adjusted in increments of 
/
EV by pressing the
command control left or right.
Previewing Depth of Field
Previewing Depth of Field
When L PREVIEW DEPTH OF FIELD is selected for F Fn BUTTON (P 69) in the
shooting menu, pressing the Fn button stops aperture down to the selected setting,
allowing depth of  eld to be previewed in the view nder or LCD monitor.
39
More on Photography and Playback
Choosing an Exposure Mode
Manual Exposure (M)
Manual Exposure (M)
Exposure can be altered from the value suggested by the camera
by rotating both the shutter speed dial and aperture ring to set-
tings other than A. M will appear in the display.
R The command dial and command control can be used to adjust
shutter speed and aperture by ±
/
EV from the selected value in steps
of 
/
EV. Use the command dial to adjust shutter speed, the com-
mand control to adjust aperture.
Command dial Command control
2000 F5.6
M
200
M
2000
F5. 6
200
Optical view nder EVF/LCD
R The manual exposure display includes an exposure indicator that
shows the amount the picture would be under- or over-exposed at
current settings.
M
2000
F5. 6
200
40
Choosing an Exposure Mode
Shutter Speed and Aperture
Shutter Speed and Aperture
Because the camera uses a lens-internal shutter, fast shutter speeds may not be available at large
apertures. If the selected combination of shutter speed and aperture is unavailable, shutter speed or
aperture will be displayed in red and the desired exposure may not be achieved.
Aperture
Aperture
Shutter speed
Shutter speed
/
/


s
s
/
/


s
s
/
/


s or slower
s or slower
F2
F2
Not available
Not available
Not available
Not available
Available
Available
F2.8
F2.8
F4
F4
Available
Available
F5.6
F5.6
F8 or above
F8 or above
Available
Available
41
More on Photography and Playback
Long Time-Exposures (T/B)
Long Time-Exposures (T/B)
Select a shutter speed of T (time) or B (bulb) for long time-exposures.
R Use of a tripod is recommended to prevent the camera from moving during the exposure.
R To reduce “noise (mottling) in long time-exposures, select ON for K LONG EXPOSURE NR in the shooting
menu (P 74). Note that this may increase the time needed to record images after shooting.
Time (T)
Time (T)
1
Rotate the shutter speed dial to T.
2
Rotate the command dial to choose
a shutter speed between 
/
 s and
30 s in steps of 
/
 EV.
2”
F5. 6
S
200
3
Press the shutter button all the way
down to take a picture at the select-
ed shutter speed. A count-down
timer will be displayed while the ex-
posure is in progress.
Bulb (B)
Bulb (B)
1
Rotate the shutter speed dial to B.
2
Press the shutter button all the way
down. The shutter will remain open
for up to 60 minutes while the shut-
ter button is pressed; the display
shows the time elapsed since the
exposure started.
R Selecting an aperture of A xes shutter speed at 30 s.
Third-Party Remote Releases
Third-Party Remote Releases
Third-party remote releases (available from third-
party suppliers) can be connected as shown below.
42
White Balance
White Balance
Press the command dial down (WB) to display the following options, then rotate the
dial or press it left or right to highlight an option that matches the light source and
press MENU/OK. The dialog shown at bottom right will be displayed; use the com-
mand dial to  ne-tune white balance or press DISP/BACK to exit without  ne-tuning
(for an explanation of “white balance, see the Glossary on page 118).
SHIFTSET
WHITE BALANCE
AUTO
SET
WB SHIFT
Option
Option
Description
Description
AUTO
AUTO White balance adjusted automatically.
h
h Measure a value for white balance (P 43).
k
k
Selecting this option displays a list of color
temperatures (P 43); highlight a tempera-
ture and press MENU/OK to select the high-
lighted option and display the  ne-tuning
dialog.
i
i
For subjects in direct sunlight.
Option
Option
Description
Description
j
j
For subjects in the shade.
k
k
Use under daylight” uorescent lights.
l
l
Use under “warm white” uorescent lights.
m
m
Use under cool white uorescent lights.
n
n
Use under incandescent lighting.
g
g
Reduces the blue cast typically associated
with underwater lighting.
R White balance is adjusted for  ash lighting only in AUTO and g modes. Turn the  ash o using other white
balance options.
R Results vary with shooting conditions. Play pictures back after shooting to check colors.
R White balance can also be adjusted using the Q button.
43
More on Photography and Playback
White Balance
h
h
: Custom White Balance
: Custom White Balance
Choose h to adjust white balance for unusual lighting conditions. White balance measurement options will
be displayed; frame a white object so that it  lls the display and press the shutter button all the way down to
measure white balance (to select the most recent custom value and exit without measuring white balance,
press DISP/BACK, or press MENU/OK to select the most recent value and display the  ne-tuning dialog).
If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value.
If “UNDER” is displayed, raise exposure compensation (
P 51) and try again.
If “OVER” is displayed, lower exposure compensation (P 51) and try again.
k
k
: Color Temperature
: Color Temperature
Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K). Light sources
with a color temperature close to that of direct sunlight appear white; light sources with a lower color tempera-
ture have a yellow or red cast, while those with a higher color temperature are tinged with blue. You can match
color temperature to the light source as shown in the following table, or choose options that di er sharply from
the color of the light source to make pictures “warmer or colder.
Choose for redder light sources
or “colder” pictures
Choose for bluer light sources
or “warmer pictures
2,000 K
Candlelight
5,000 K
Direct sunlight
15,000 K
Blue sky
Sunset/sunrise Shade
44
Sensitivity
Sensitivity
“Sensitivity refers to the cameras sensitivity to light. Choose from values between 200 and 6400, or
select L (100), H (12800), or H (25600) for special situations. Higher values can be used to reduce
blur when lighting is poor, while lower values allow slower shutter speeds or wider apertures in bright
light; note, however, that mottling may appear in pictures taken at high sensitivities, particularly at
H (25600), while choosing L (100) reduces dynamic range. Values of from ISO 200 to ISO 6400 are
recommended in most situations. If an AUTO option is selected, the camera will adjust sensitivity
automatically in response to shooting conditions; the value in parentheses is the maximum sensitivity
that will be selected when the subject is poorly lit.
1
Press MENU/OK in shooting mode to display the shooting menu. Press
the command dial up or down to highlight N ISO and press MENU/
OK.
R At default settings, ISO options can also be displayed by pressing the Fn
button.
P
ISO
IMAGE SIZE
IMAGE QUALITY
DYNAMIC RANGE
FILM SIMULATION
FILM SIMULATION BKT
3
:
2
F
200
SELF-TIMER OFF
SHOOTING MENU
EXIT
2
Press the command dial up or down to highlight the desired option
and press MENU/OK to select.
P
2000
F5. 6
200
P
3
:
2
F
3
:
2
F
200
OFFOFF
SHOOTING MENU
ISO
O
500
400
320
250
200
L
(
100
)
AUTO
(
400
)
R Sensitivity is not reset when the camera is turned o .
R L (100) is reset to ISO 200 and H (12800) and H (25600) are reset to ISO 6400 when RAW, FINE+RAW, or
NORMAL+RAW is selected for image quality (P 73). For more information on the settings available with
L (100), H (12800), and H (25600), see page 125.
45
More on Photography and Playback
Sensitivity
AUTO
The following options are available when AUTO is selected:
Option
Option
Default
Default
DEFAULT SENSITIVITY
DEFAULT SENSITIVITY
200
200
MAX. SENSITIVITY
MAX. SENSITIVITY
800
800
MIN. SHUTTER SPEED
MIN. SHUTTER SPEED
/
/


The camera automatically chooses a sensitivity between the default and maximum values. Sensitiv-
ity is only raised above the default value if the shutter speed required for optimal exposure would be
slower than the value selected for MIN. SHUTTER SPEED.
R If the value selected for DEFAULT SENSITIVITY is higher than that selected for MAX. SENSITIVITY, DEFAULT
SENSITIVITY will be set to the value selected for MAX. SENSITIVITY.
R The camera may select shutter speeds slower than MIN. SHUTTER SPEED if pictures would still be underex-
posed at the value selected for MAX. SENSITIVITY.
46
Focus Mode
Focus Mode
Use the focus mode selector to choose how the camera focuses.
AF-S (single AF): Focus locks while the shutter button is pressed halfway.
Choose for stationary subjects.
AF-C (continuous AF): Focus is continually adjusted to re ect changes in the
distance to the subject even when the shutter button is not pressed
halfway (note that this increases the drain on the battery).
MF (manual): Focus manually using the lens focus ring. Rotate the ring left to reduce the focus distance,
right to increase. The manual focus indicator indicates how closely the focus distance matches the
distance to the subject in the focus brackets (the red bar indicates the focus distance, the white bar
the depth of  eld, or in other words the distance in front of and behind the focus point that appears
to be in focus); you can also check focus visually in the view nder or LCD monitor. Choose for man-
ual control of focus or in situations in which the camera is unable to focus using autofocus (P 50).
Reduce focus
distance
Increase focus
distance
2000
F5. 6
200
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10
M
Manual focus
mode icon
Manual focus
indicator
Focus distance
(red bar)
1.0 1.5 2.0 3.0
Depth of  eld
(white bar)
R Use the I FOCUS RING option in the setup menu (P 89) to reverse the direction of rotation of the focus ring.
R The camera will not focus if the focus ring is rotated past in nity.
R To focus using autofocus, press the AFL/AEL button. This can be used to quickly focus on a chosen subject in
manual focus mode.
R The camera can show focus distance in meters or feet. Use the M FOCUS SCALE UNITS option in the setup
menu (
P 89) to choose the units used.
47
More on Photography and Playback
Focus Mode
MF Assist
The c MF ASSIST option in the setup menu can be used to check focus when pictures are framed in
the LCD monitor or electronic view nder.
R The c MF ASSIST menu can be displayed by pressing and holding the center of the command control.
The following options are available:
FOCUS PEAK HIGHLIGHT: Highlights high-contrast outlines. Rotate the focus ring until
the subject is highlighted.
DIGITAL SPLIT IMAGE: Displays a split, black-and-white image in the center of the
frame. Frame the subject in the split-image area and rotate the focus ring until
the three parts of the split image are correctly aligned.
Manual Focus: Checking Focus
Manual Focus: Checking Focus
If ON is selected for j FOCUS CHECK in the setup menu (P 89),
rotating the focus ring automatically magni es the view in the elec-
tronic view nder or LCD monitor for precise focus. To scroll to other
areas of the frame, press the AF button and rotate the command dial.
2000
F5. 6
200
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10
M
2000
F5. 6
200
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10
M
R The magni cation varies depending on whether STANDARD or FOCUS PEAK HIGHLIGHT/DIGITAL SPLIT
IMAGE is selected for c MF ASSIST.
48
Focus Mode
Focus Frame Selection
Focus Frame Selection
When t AREA is selected for
F
F AF MODE in the shooting
menu and AF-S is selected for focus mode, the electronic view-
nder and LCD monitor o er a choice of 49 focus points and the
optical view nder a choice of 25, allowing photographs to be
composed with the main subject positioned almost anywhere in
the frame. To position the focus frame, press the AF button and
then use the command dial (the focus frame can be returned to
the center by pressing DISP/BACK). Press MENU/OK when the focus
frame is in the desired position.
Q When you switch to the optical view nder, the camera will select the
focus frame closest to that selected in the electronic view nder or
LCD monitor.
Focus frame
Focus point
OVF EVF/LCD
When framing pictures in the electronic view nder or LCD moni-
tor, you can choose the size of the focus frame for AF-S by press-
ing the AF button and then pressing the command control left
or right. Press the control left to reduce the frame by up to 50%,
right to enlarge it by up to 150%. Press MENU/OK when the frame
is the desired size.
EVF/LCD
49
More on Photography and Playback
Focus/Exposure Lock
Focus/Exposure Lock
To compose photographs with o -center subjects:
1
Focus: Position the subject in the focus frame and press the shutter button half-
way to lock focus and exposure. Focus and exposure will remain locked while
the shutter button is pressed halfway (AF/AE lock).
P
200
2000
F5.6
R Depending on the option selected for v AE/AF-LOCK BUTTON in the shooting menu (P 78), focus and/
or exposure can also be locked by pressing the AFL/AEL button; focus and/or exposure will remain locked
even when the shutter button is pressed halfway. Choose AE LOCK ONLY to lock exposure but not focus,
AF LOCK ONLY to lock focus but not exposure, or AE/AF LOCK to lock both focus and exposure. Regard-
less of the option selected, the AFL/AEL button can not be used to lock exposure in manual focus mode
(P 46).
2
Recompose: Keep the shutter button pressed halfway or keep the AFL/AEL button
pressed.
R If AE&AF ON/OFF SWITCH is selected for k AE/AF-LOCK MODE (P 78), focus
and/or exposure lock when the AFL/AEL button is pressed and remain locked until the
button is pressed again.
P
200
F5.6
2000
3
Shoot: Press the button all the way down.
P
200
F5.6
2000
50
Focus/Exposure Lock
Autofocus
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed
below.
Very shiny subjects such as mirrors or car bodies.
• Fast-moving subjects.
Subjects photographed through a window or other re ective object.
Dark subjects and subjects that absorb rather than re ect light, such as hair or fur.
Insubstantial subjects, such as smoke or  ame.
• Subjects that show little contrast with the background (for example, subjects in clothing that is the same color
as the background).
Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly contrasting elements).
51
More on Photography and Playback
Exposure Compensation
Exposure Compensation
Rotate the exposure compensation dial to adjust exposure when photographing very bright,
very dark, or high-contrast subjects. The e ect is visible in the LCD monitor and electronic
view nder; when using the optical view nder, use the exposure indicator to check exposure.
Exposure compensation indicator
2000 F5.6
P
200
P
2000
F5.6
200
2000
1F5.6
000100
P
200
F
OVF EVF LCD
Choose positive values (+) to
increase exposure
Choose negative values (–) to
reduce exposure
Exposure Value (EV)
Exposure Value (EV)
The exposure value is determined by the sensitiv-
ity of the image sensor and the amount of light to
which the sensor is exposed. Doubling the amount
increases EV by one, while halving it reduces EV by
one. The amount of light entering the camera can be
controlled by adjusting aperture and shutter speed.
Choosing an Exposure Compensation Value
Choosing an Exposure Compensation Value
Backlit subjects: Choose values
from +
/
EV to +1
/
 EV.
Highly re ective subjects or very
bright scenes (e.g., snow elds): +1 EV
Scenes that are mostly sky: +1 EV
Spotlit subjects (particularly if photographed against dark back-
grounds): –
/
 EV
Subjects with low re ectivity (pine trees or dark-colored foliage):
–
/
 EV
52
Metering
Metering
To choose how the camera meters exposure, press the AE button
to display metering options. Use the command dial to highlight
an option and press AE to select.
Mode
Mode
Description
Description
o
o
(MULTI)
(MULTI)
The camera instantly determines exposure based on an analysis of
composition, color, and brightness distribution. Recommended in
most situations.
p
p
(SPOT)
(SPOT)
The camera meters lighting conditions in an area at the center of the
frame equivalent to 2% of the total. Recommended with backlit sub-
jects and in other cases in which the background is much brighter or
darker than the main subject.
q
q
(AVERAGE)
(AVERAGE)
Exposure is set to the average for the entire frame. Provides consistent
exposure across multiple shots with the same lighting, and is particu-
larly e ective for landscapes and portraits of subjects dressed in black
or white.
PHOTOMETRY
MULTI
SPOT
AVERAGE
OVF EVF/LCD
53
More on Photography and Playback
Using the Self-Timer
Using the Self-Timer
Use the timer for self-portraits or to prevent blur caused by camera shake.
1
Press MENU/OK in shooting mode to display the shooting menu. Press
the command dial up or down to highlight B SELF-TIMER and
press MENU/OK.
3
:
2
F
200
P
ISO
SHOOTING MENU
IMAGE SIZE
IMAGE QUALITY
DYNAMIC RANGE
FILM SIMULATION
FILM SIMULATION BKT
OFF
SELF-TIMER
EXIT
2
Press the command dial up or down to highlight one of the following
options and press MENU/OK to select.
Option
Option
Description
Description
R
R
2 SEC
2 SEC
The shutter is released two seconds after the shutter button is pressed. Use
to reduce blur caused by the camera moving when the shutter button is
pressed.
S
S
10 SEC
10 SEC
The shutter is released ten seconds after the shutter button is pressed. Use
for photographs in which you wish to appear yourself.
OFF
OFF Self-timer o .
200
3
:
2
F
3
:
2
F
200
P
OFFSELF-TIMER
SHOOTING MENU
O
2
SEC
10
SEC
OFF
3
Press the shutter button halfway to focus.
Q Stand behind the camera when using the shutter button. Standing in
front of the lens can interfere with focus and exposure.
54
Using the Self-Timer
4
Press the shutter button the rest of the way down to start the timer.
The display in the monitor shows the number of seconds remaining
until the shutter is released. To stop the timer before the picture is
taken, press DISP/BACK.
9
9
The self-timer lamp on the front of the camera will blink immediately
before the picture is taken. If the two-second timer is selected, the
self-timer lamp will blink as the timer counts down.
R The self-timer turns o automatically when the camera is turned o .
55
More on Photography and Playback
Film Simulation
Film Simulation
Simulate the e ects of di erent kinds of  lm, including black-and-white (with or without color  lters).
1
Press MENU/OK in shooting mode to display the shooting menu. Press
the command dial up or down to highlight P FILM SIMULATION
and press MENU/OK.
P
ISO
SHOOTING MENU
IMAGE SIZE
IMAGE QUALITY
DYNAMIC RANGE
FILM SIMULATION
FILM SIMULATION BKT
EXIT
3
:
2
F
200
SELF-TIMER OFF
2
Press the command dial up or down to highlight one of the following options and press MENU/OK
to select.
Option
Option
Description
Description
c
c
(PROVIA/STANDARD)
(PROVIA/STANDARD)
Standard color reproduction. Suited to a wide range of subjects, from portraits to landscapes.
>
>
(Velvia/VIVID)
(Velvia/VIVID)
A high-contrast palette of saturated colors, suited to nature photos.
e
e
(ASTIA/SOFT)
(ASTIA/SOFT)
Enhances the range of hues available for skin tones in portraits while preserving the bright blues
of daylight skies. Recommended for outdoor portrait photography.
g
g
(PRO Neg. Hi)
(PRO Neg. Hi)
O ers slightly more contrast than h (PRO Neg. Std). Recommended for outdoor portrait pho-
tography.
h
h
(PRO Neg. Std)
(PRO Neg. Std)
A soft-toned palette. The range of hues available for skin tones is enhanced, making this a good
choice for studio portrait photography.
;
;
(MONOCHROME)
(MONOCHROME)
Take pictures in standard black and white.
e
e
(MONOCHROME + Ye FILTER)
(MONOCHROME + Ye FILTER)
Take black-and-white pictures with slightly increased contrast. This setting also slightly tones
down the brightness of the sky.
d
d
(MONOCHROME + R FILTER)
(MONOCHROME + R FILTER)
Take black-and-white pictures with increased contrast. This setting also tones down the bright-
ness of the sky.
f
f
(MONOCHROME + G FILTER)
(MONOCHROME + G FILTER)
Soften skin tones in black-and-white portraits.
f
f
(SEPIA)
(SEPIA)
Take pictures in sepia.
R Film simulation options can be combined with tone and sharpness settings (P 74).
56
Bracketing
Bracketing
Automatically vary settings over a series of pictures.
1
Press the DRIVE button to display drive options and rotate the dial or press it up or down to highlight
one of the following:
AE BKT
±
1
±
2
/
3
±
1
/
3
Option
Option
Description
Description
AE BKT
AE BKT
Press the command dial left or right to highlight a bracketing amount. Each time the shutter button is
pressed, the camera will take three shots: one using the metered value for exposure, the second over-
exposed by the selected amount, and the third underexposed by the same amount (regardless of the
amount selected, exposure will not exceed the limits of the exposure metering system).
ISO BKT
ISO BKT
Press the command dial left or right to highlight a bracketing amount. Each time the shutter is released,
the camera will take a picture at the current sensitivity (P 44) and process it to create two additional copies,
one with sensitivity raised and the other with sensitivity lowered by the selected amount (regardless of the
amount selected, sensitivity will not exceed ISO 6400 or fall below ISO 200).
FILM SIMULATION
FILM SIMULATION
BKT
BKT
Each time the shutter is released, the camera takes one shot and processes it to create copies with the  lm
simulation settings selected for X FILM SIMULATION BKT in the shooting menu (P 73).
DYNAMIC RANGE
DYNAMIC RANGE
BKT
BKT
Each time the shutter button is pressed, the camera takes three shots with di erent dynamic ranges (P 73):
100% for the  rst, 200% for the second, and 400% for the third. While dynamic range bracketing is in e ect,
sensitivity will be restricted to a minimum of ISO 800; the sensitivity previously in e ect is restored when
bracketing ends.
Press MENU/OK to select the highlighted option.
2
Take photographs.
57
More on Photography and Playback
Multiple Exposures
Multiple Exposures
Create a photograph that combines two exposures.
+
1
Press the DRIVE button to display drive options.
STILL IMAGE
2
Press the command dial up or down
to highlight n MULTIPLE EXPO-
SURE and press MENU/OK.
3
Take the  rst shot.
4
Press MENU/OK. You will be prompt-
ed to take the second shot.
R To return to Step 2 and retake the  rst shot, press
the command dial left. To save the  rst shot and
exit without creating a multiple exposure, press
DISP/BACK.
5
Take the second shot.
6
Press MENU/OK to create the multiple
exposure, or press the command
dial left to return to Step 4 and re-
take the second shot.
58
1
Press the DRIVE button to display drive op-
tions. Press the command dial up or down to
highlight I (CONTINUOUS), and the options
shown below will be displayed.
2
Press the command dial right or left
to choose from frame rates of ap-
proximately 6.0 fps (frames per sec-
ond) and 3.0 fps. Press MENU/OK to proceed
when settings are complete.
3
Press the shutter button halfway to
focus.
4
Press the shutter button the rest
of the way down to start shoot-
ing. Shooting ends when the shut-
ter button is released, the selected
number of pictures has been taken,
or the memory card is full.
R Focus and exposure are determined by the  rst
frame in each series. The  ash turns o automati-
cally; the previously-selected  ash mode is restored
when burst shooting is turned o .
R Frame rate varies with shutter speed and may slow
as more shots are taken.
R Additional time may be required to record pictures
when shooting ends.
R If  le numbering reaches 999 before shooting is
complete, the remaining pictures will be recorded
to a new folder (P 89).
R In some drive modes, shooting may not begin if the
space available on the memory card is insu cient.
Continuous Shooting (Burst Mode)
Continuous Shooting (Burst Mode)
Capture motion in a series of pictures.
59
More on Photography and Playback
Continuous Shooting (Burst Mode)
Viewing Pictures Taken in a Single Burst
Viewing Pictures Taken in a Single Burst
When a picture taken in continuous shooting mode is dis-
played full-frame, the  rst picture in the current burst can
be viewed by pressing the command dial down (burst
mode playback). Press the command dial right to view pic-
tures in the order recorded, left to view pictures in reverse
order. Keep the command dial pressed to scroll rapidly to
the desired frame. To exit, press DISP/BACK.
Position in burst/total number
of pictures in burst
PLAY CONTINUOUS SHOTS PLAY NORMAL
1/10
First picture in burst
R Pressing the command dial right when the last picture in the burst is displayed displays the  rst picture in the
burst; similarly, pressing the command dial left when the  rst picture is displayed displays the last picture.
R Deletion (
P 81), rotation (P 83), and protect (P 82) operations applied during burst mode playback apply
only to the current picture. In contrast, if these operations are performed when a picture taken in continuous
shooting mode is displayed in full-frame playback, all images in the same burst will be a ected.
Bursts That Cross Folders
Bursts That Cross Folders
If a single burst is spread across multiple folders, the pictures in each folder will be treated as separate bursts.
60
1
Press the DRIVE button to display drive op-
tions. Press the command dial up or down to
highlight r (MOTION PANORAMA) and press
MENU/OK.
MOTION PANORAMA
2
To select the size of the angle
through which you will pan the
camera while shooting, press the
command dial left. Highlight a size and press
MENU/OK.
3
Press the command dial right to
view a choice of pan directions.
Highlight a pan direction and press
MENU/OK.
4
Press the shutter button all the way down to
start recording. There is no need to keep the
shutter button pressed during recording.
5
Pan the camera in the direction shown by the
arrow. Shooting ends automatically when the
camera is panned to the end of the guides
and the panorama is complete.
DIRECTIONANGLE
R Shooting ends if the shutter button is pressed all
the way down during shooting. No panorama
may be recorded if the shutter button is pressed
before the panorama is complete.
The size of the completed panorama varies with
the angle and pan direction.
Angle
Angle
Pan direction
Pan direction
Size (W × H)
Size (W × H)
120°
120°
Horizontal
Horizontal
6,440 × 1,440
6,440 × 1,440
Vertical
Vertical
2,160 × 6,440
2,160 × 6,440
180°
180°
Horizontal
Horizontal
9,600 × 1,440
9,600 × 1,440
Vertical
Vertical
2,160 × 9,600
2,160 × 9,600
Panoramas
Panoramas
Follow an on-screen guide to create a panorama.
61
More on Photography and Playback
Panoramas
Q Panoramas are created from multiple frames; expo-
sure for the entire panorama is determined by the
rst frame. The camera may in some cases record an
greater or lesser angle than selected or be unable to
stitch the frames together perfectly. The last part of
the panorama may not be recorded if shooting ends
before the panorama is complete.
Q Shooting may be interrupted if the camera is panned
too quickly or too slowly. Panning the camera in a
direction other than that shown cancels shooting.
Q The desired results may not be achieved with mov-
ing subjects, subjects close to the camera, unvary-
ing subjects such as the sky or a  eld of grass, sub-
jects that are in constant motion, such as waves and
waterfalls, or subjects that undergo marked chang-
es in brightness. Panoramas may be blurred if the
subject is poorly lit.
For Best Results
For Best Results
For best results, prop your elbows against your sides
and move the camera slowly in a small circle at a
steady speed, keeping the camera horizontal and
being careful only to pan in the direction shown by
the guides. Use a tripod for best results. If the desired
results are not achieved, try panning at a di erent
speed.
62
Panoramas
Viewing Panoramas
Viewing Panoramas
In full-frame playback, panoramas can be played back us-
ing the command dial. Press the command dial down to
start playback and press again to pause. While playback is
paused, you can scroll the panorama manually be pressing
the command dial left or right. To exit to full-frame play-
back, press the command dial up.
PLAY
PAUSESTOP
63
More on Photography and Playback
Recording Pictures in RAW Format
Recording Pictures in RAW Format
To toggle RAW image quality on or o for a single shot, assign RAW
to the Fn button (P 69). If a JPEG option is currently selected for im-
age quality, pressing the Fn button temporarily selects the equivalent
JPEG+RAW option. If a JPEG+RAW option is currently selected, pressing
the Fn button temporarily selects the equivalent JPEG option, while if
RAW is selected, pressing the Fn button temporarily selects FINE. Taking a picture or pressing the Fn
button again restores the previous setting.
R RAW images record raw, unprocessed data from the camera image sensor. JPEG copies of RAW images can
be created using the j RAW CONVERSION option in the playback menu, or RAW images can be viewed on
a computer using the RAW FILE CONVERTER application that is installed with the software on the supplied CD
(P 94, 95).
R Sensitivities of L (100), H (12800), and H (25600) are not available when RAW image quality is on (P 44).
64
Recording Pictures in RAW Format
Creating JPEG Copies of RAW Pictures
Creating JPEG Copies of RAW Pictures
RAW pictures store information on camera settings separately from the data captured by the camera
image sensor. Using the j RAW CONVERSION option in the playback menu, you can create JPEG
copies of RAW pictures using di erent options for the settings listed below. The original image data
are una ected, allowing a single RAW image to be processed in a multitude of di erent ways.
1
Press MENU/OK during playback to display the
playback menu, then press the command dial
up or down to highlight j RAW CONVER-
SION and press MENU/OK to display the set-
tings listed in the table at right.
R These options can also be displayed by pressing
Q during playback.
2
Press the command dial
up or down to highlight a
setting and press the com-
mand dial right to select.
Press the command dial up
or down to highlight the desired option and
press MENU/OK to select and return to the set-
tings list. Repeat this step to adjust additional
settings.
3
Press the Q button to preview the JPEG copy
and press MENU/OK to save.
Setting
Setting
Description
Description
REFLECT SHOOTING
COND.
Create a JPEG copy using the settings in ef-
fect at the time the photo was taken.
PUSH/PULL
PROCESSING
Adjust exposure by –1 EV to +3 EV in incre-
ments of 
/
 EV (P 51).
DYNAMIC RANGE
Enhance details in highlights for natural
contrast (P 73).
FILM SIMULATION
Simulate the e ects of di erent types of  lm
(P 55).
WHITE BALANCE
Adjust white balance (P 42).
WB SHIFT
Fine-tune white balance (P 42).
COLOR
Adjust color density (P 74).
SHARPNESS
Sharpen or soften outlines (P 74).
HIGHLIGHT TONE
Adjust highlights (P 74).
SHADOW TONE
Adjust shadows (P 74).
NOISE REDUCTION
Process the copy to reduce mottling (P 74).
COLOR SPACE
Choose the color space used for color repro-
duction (P 91).
CREATE
REFLECT SHOOTING COND.
PUSH/PULL PROCESSING
DYNAMIC RANGE
FILM SIMULATION
WHITE BALANCE
WB SHIFT
RAW CONVERSION
CANCEL
65
More on Photography and Playback
The ND Filter
The ND Filter
The camera is equipped with a Neutral Density (ND)  lter that reduces exposure by the equivalent of
3 EV. This allows slower shutter speeds or wider apertures to be used with brightly lit subjects, making
it possible to blur motion or soften background details without risk of overexposure.
1
Press MENU/OK in shooting mode to display the shooting menu. Press
the command dial up or down to highlight t ND FILTER and press
MENU/OK.
P
COLOR
SHOOTING MENU
SHARPNESS
HIGHLIGHT TONE
SHADOW TONE
NOISE REDUCTION
LONG EXPOSURE NR
0
0
0
0
0
ND FILTER OFF
ON
EXIT
2
Press the command dial up or down to highlight ON and press MENU/OK to select.
66
Image Search
Image Search
Follow the steps below to search for pictures.
1
Press MENU/OK during playback to display the playback menu. Press the command dial up or down to
highlight b IMAGE SEARCH and press MENU/OK.
2 Highlight an option and press MENU/OK.
Option
Option
Description
Description
BY DATE Search by date.
BY FACE Search for pictures that include faces.
BY I FAVORITES Search by rating (P 25).
BY TYPE OF DATA Find all still pictures, all movies, all pictures taken in burst mode, or all RAW pictures.
BY UPLOAD MARK Find all pictures selected for upload to a speci ed destination.
3
Select a search condition. Only pictures that match the search condition will
be displayed. To delete or protect selected pictures or to view the selected
pictures in a slide show, press MENU/OK and choose from the options at right.
4 To end the search, select EXIT SEARCH.
Option
Option
See page
See page
A
A
ERASE
ERASE
81
81
D
D
PROTECT
PROTECT
82
82
I
I
SLIDE SHOW
SLIDE SHOW
84
84
67
More on Photography and Playback
PhotoBook Assist
PhotoBook Assist
Create books from your favorite photos.
Creating a PhotoBook
Creating a PhotoBook
1
Select NEW BOOK for m PHOTOBOOK AS-
SIST in the playback menu (P 85) and choose
from the following options:
SELECT FROM ALL: Choose from all available
pictures.
SELECT BY IMAGE SEARCH: Choose from pictures
matching selected search conditions (P
66).
R Neither photographs a or smaller nor movies
can be selected for photobooks.
2
Scroll through the images and press the com-
mand dial up to select or deselect. To display
the current image on the cover, press the
command dial down. Press MENU/OK to exit
when the book is complete.
R The  rst picture selected becomes the cover im-
age. Press the command dial down to select a
di erent image for the cover.
3
Highlight COMPLETE PHOTOBOOK and
press MENU/OK (to select all photos or all pho-
tos matching the speci ed search conditions
for the book, choose SELECT ALL). The new
book will be added to the list in the photo-
book assist menu.
Q Books can contain up to 300 pictures.
Q Books that contain no photos are automatically de-
leted.
68
PhotoBook Assist
Viewing Photobooks
Viewing Photobooks
Highlight a book in the photobook assist menu
and press MENU/OK to display the book, then press
the command dial left or right to scroll through
the pictures.
Editing and Deleting Photobooks
Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The
following options will be displayed; select the
desired option and follow the on-screen instruc-
tions.
EDIT: Edit the book as described in “Creating a
PhotoBook” (P 67).
ERASE: Delete the book.
Photobooks
Photobooks
Photobooks can be copied to a computer using the supplied MyFinePix Studio software (P 93).
69
More on Photography and Playback
The Fn Button
The Fn Button
The role played by the Fn button can be selected using the F Fn
BUTTON option in the shooting menu (P 74). The options available
include multiple exposure (P 57), depth-of- eld preview (P 38),
sensitivity (P 44), the self-timer (P 53), image size (P 72), image
quality (P 73), dynamic range (P 73),  lm simulation (P 55),
ND  lter (P 65), AF mode (P 77), custom settings (P 70), movie recording (P 32), advanced  lter
(P 77), RAW/JPEG toggle (P 63), and wide conversion lens (P 108).
R The F Fn BUTTON menu can also be displayed by pressing and holding the Fn button.
70
Saving Settings
Saving Settings
Save up to 3 sets of custom camera settings for commonly-encountered situations. Saved settings can
be recalled using the u SELECT CUSTOM SETTING option in the shooting menu.
1
Press MENU/OK in shooting mode to display the shooting menu. Press
the command dial up or down to highlight K EDIT/SAVE CUSTOM
SETTING and press MENU/OK.
P
SELECT CUSTOM SETTING
SHOOTING MENU
EDIT/SAVE CUSTOM SETTING
Fn BUTTON
DISP. CUSTOM SETTING
FRAMING GUIDLINE
EXIT
WIDE CONVERSION LENS OFF
MF ASSIST
STD
2
Highlight a custom settings bank and press MENU/OK to select. Ad-
just the following as desired and press DISP/BACK when adjustments
are complete: N ISO, U DYNAMIC RANGE, P FILM SIMULATION,
D WHITE BALANCE, f COLOR, q SHARPNESS, r HIGHLIGHT
TONE, s SHADOW TONE, h NOISE REDUCTION, and R RESET.
EXIT
SAVE CURRENT SETTINGS
ISO
DYNAMIC RANGE
FILM SIMULATION
WHITE BALANCE
COLOR
CUSTOM
1
200
AUTO
0
R To replace the settings in the selected bank with the settings currently selected with the camera, select
K SAVE CURRENT SETTINGS and press MENU/OK.
R To reset settings for the current bank, highlight RESET and press MENU/OK.
3
A con rmation dialog will be displayed; highlight OK and press MENU/OK.
OK
CUSTOM
1
SET OK?
CANCEL
OK
SAVE CUSTOM SETTING
71
More on Photography and Playback
Advanced Movie Recording
Advanced Movie Recording
Depth of Field
Depth of Field
Aperture can be set manually for movie recording by selecting an aperture
other than A for aperture-priority AE. Adjust aperture before recording be-
gins. Choose low f-numbers to soften background details. The e ect can be
heightened by increasing the distance between your subject and the back-
ground.
Q Movies recorded when the aperture is displayed in red will not be correctly exposed.
Before Recording
Before Recording
Before recording, adjust movie settings (P 80), aperture (P 38), and exposure compensation (P 51)
and select a focus mode (P 46). These settings can not be adjusted during recording.
Using an External Microphone
Using an External Microphone
The camera can be used with optional MIC-ST1 stereo microphones using the cable
supplied with the MIC-ST1. See the microphone manual for details.
R Recording level can be adjusted using t MIC LEVEL ADJUSTMENT (P 80).
72
Menus
Menus
Using the Menus: Shooting Mode
Using the Menus: Shooting Mode
The shooting menu is used to adjust settings for a wide range of shooting condi-
tions. To display the shooting menu, press MENU/OK in shooting mode. Highlight
items and press the command dial right to view options, then highlight an option
and press MENU/OK. Press DISP/BACK to exit when settings are complete.
P
ISO
IMAGE SIZE
IMAGE QUALITY
DYNAMIC RANGE
FILM SIMULATION
FILM SIMULATION BKT
3
:
2
F
200
SELF-TIMER OFF
SHOOTING MENU
EXIT
Shooting Menu Options (Photographs)
Shooting Menu Options (Photographs)
B
B
SELF-TIMER
SELF-TIMER
(
(
default:
default:
OFF)
OFF)
Take pictures with the self-timer (P 53).
N
N
ISO
ISO
(
(
default:
default:
200)
200)
Control the cameras sensitivity to light (P 44).
O
O
IMAGE SIZE
IMAGE SIZE
(
(
default:
default:
O
O
3 : 2)
3 : 2)
Choose the size and aspect ratio at which still pictures are recorded.
Aspect Ratio
Aspect Ratio
Pictures with an aspect ratio of 3 : 2 have the same proportions as
Pictures with an aspect ratio of 3 : 2 have the same proportions as
a frame of 35 mm lm, while an aspect ratio of 16 : 9 is suited to
a frame of 35 mm  lm, while an aspect ratio of 16 : 9 is suited to
display on
display on
H
H
igh
igh
D
D
e nition (HD) devices. Pictures with an aspect
e nition (HD) devices. Pictures with an aspect
ratio of 1 : 1 are square.
ratio of 1 : 1 are square.
O IMAGE SIZE is not reset when the camera is turned o or an-
other shooting mode is selected.
Option
Option
Prints at sizes up to
Prints at sizes up to
Option
Option
Prints at sizes up to
Prints at sizes up to
O
O
3 : 2
3 : 2
41 × 28 cm (16 × 11 in.)
Q
Q
3 : 2
3 : 2
21 × 14 cm (8 × 5 in.)
O
O
16 : 9
16 : 9
41 × 23 cm (16 × 9 in.)
Q
Q
16 : 9
16 : 9
21 × 12 cm (8 × 4 in.)
O
O
1 : 1
1 : 1
28 × 28 cm (11 × 11 in.)
Q
Q
1 : 1
1 : 1
14 × 14 cm (5 × 5 in.)
P
P
3 : 2
3 : 2
29 × 20 cm (11 × 7 in.)
P
P
16 : 9
16 : 9
29 × 16 cm (11 × 6 in.)
P
P
1 : 1
1 : 1
20 × 20 cm (7 × 7 in.)
73
Menus
Using the Menus: Shooting Mode
T
T
IMAGE QUALITY
IMAGE QUALITY
(
(
default:
default:
FINE)
FINE)
Choose a  le format and compression ratio. Select FINE or NORMAL to record JPEG images, RAW to record RAW images, or
FINE+RAW or NORMAL+RAW to record both JPEG and RAW images. FINE and FINE+RAW use lower JPEG compression ratios
for higher-quality JPEG images, while NORMAL and NORMAL+RAW use higher JPEG compression ratios to increase the num-
ber of images that can be stored.
U
U
DYNAMIC RANGE
DYNAMIC RANGE
(
(
default:
default:
V
V
)
)
Control contrast. Choose lower values to increase contrast when shooting indoors or under overcast skies, higher values to
reduce loss of detail in highlights and shadows when photographing high-contrast scenes. Higher values are recommended
for scenes that include both sunlight and deep shade, for such high-contrast subjects as sunlight on water, brightly-lit autumn
leaves, and portraits taken against a blue sky, and for white objects or people wearing white; note, however, that mottling may
appear in pictures taken at higher values.
R If AUTO is selected, shutter speed and aperture will be displayed when the shutter button is pressed halfway.
R
R
W
W 200% is available at sensitivities of ISO 400 and above,
X
X 400% at sensitivities of ISO 800 and above.
P
P
FILM SIMULATION
FILM SIMULATION
(
(
default:
default:
c
c
PROVIA/STANDARD)
PROVIA/STANDARD)
Simulate the e ects of di erent types of  lm (P 55).
X
X
FILM SIMULATION BKT
FILM SIMULATION BKT
Choose  lm types for  lm simulation bracketing (P 56).
t
t
ND FILTER
ND FILTER
(
(
default:
default:
OFF)
OFF)
Turn the ND  lter on or o (P 65).
74
Using the Menus: Shooting Mode
f
f
COLOR
COLOR
(
(
default:
default:
MID)
MID)
Adjust color density.
q
q
SHARPNESS
SHARPNESS
(
(
default:
default:
STANDARD)
STANDARD)
Sharpen or soften outlines.
r
r
HIGHLIGHT TONE
HIGHLIGHT TONE
(
(
default:
default:
STANDARD)
STANDARD)
Adjust the appearance of highlights.
s
s
SHADOW TONE
SHADOW TONE
(
(
default:
default:
STANDARD)
STANDARD)
Adjust the appearance of shadows.
h
h
NOISE REDUCTION
NOISE REDUCTION
(
(
default:
default:
STANDARD)
STANDARD)
Reduce noise in pictures taken at high sensitivities.
K
K
LONG EXPOSURE NR
LONG EXPOSURE NR
(
(
default:
default:
ON)
ON)
Select ON to reduce mottling in long time-exposures (P 41).
u
u
SELECT CUSTOM SETTING
SELECT CUSTOM SETTING
Recall settings saved with K EDIT/SAVE CUSTOM SETTING.
K
K
EDIT/SAVE CUSTOM SETTING
EDIT/SAVE CUSTOM SETTING
Save settings (P 70).
F
F
Fn BUTTON
Fn BUTTON
(
(
default:
default:
N
N
ISO)
ISO)
Choose the role played by the Fn button (P 69).
75
Menus
Using the Menus: Shooting Mode
v
v
DISP. CUSTOM SETTING
DISP. CUSTOM SETTING
Choose the items displayed in the view nder and LCD monitor (P 21). The following items can be displayed: framing grid (you
can also select the grid type as described on page 76), virtual horizon, focus distance (auto or manual), histogram, exposure (shut-
ter speed, aperture, and sensitivity), exposure compensation/exposure indicator, metering,  ash mode, white balance,  lm simu-
lation, dynamic range, number of exposures remaining, image size and quality, and battery level. See pages 6 8 for the locations
of these items in the displays. Press the command dial up or down to highlight items and press MENU/OK to select or deselect.
Press DISP/BACK to exit when settings are complete.
Virtual Horizon
Virtual Horizon
Selecting
Selecting
ELECTRONIC LEVEL
ELECTRONIC LEVEL
displays a virtual horizon. The camera is level when the two lines overlap.
displays a virtual horizon. The camera is level when the two lines overlap.
R The virtual horizon may not be displayed if the camera lens is pointed up or down.
P
76
Using the Menus: Shooting Mode
c
c
FRAMING GUIDLINE
FRAMING GUIDLINE
(
(
default:
default:
F
F
GRID 9)
GRID 9)
Choose the type of framing grid available in shooting mode.
F
F
GRID 9
GRID 9
G
G
GRID 24
GRID 24
H
H
HD FRAMING
HD FRAMING
P P P
For “rule of thirds” composition. A six-by-four grid. Frame HD pictures in the crop shown by the
lines at the top and bottom of the display.
Y
Y
WIDE CONVERSION LENS
WIDE CONVERSION LENS
(
(
default:
default:
OFF)
OFF)
Select ON when using the an optional wide conversion lens (P 108).
c
c
MF ASSIST
MF ASSIST
(
(
default:
default:
STANDARD)
STANDARD)
Choose how focus is displayed in manual focus mode (P 47).
Option
Option
Description
Description
STANDARD
STANDARD Focus is displayed normally (focus peaking and digital split image are not available).
DIGITAL SPLIT IMAGE
DIGITAL SPLIT IMAGE A black-and-white split-image display.
FOCUS PEAK HIGHLIGHT
FOCUS PEAK HIGHLIGHT The camera heightens high-contrast outlines. Choose from LOW and HIGH.
77
Menus
Using the Menus: Shooting Mode
d
d
ADVANCED FILTER
ADVANCED FILTER
(
(
default:
default:
OFF)
OFF)
Take photos with  lter e ects. Choose from the following  lters.
Filter
Filter
Description
Description
G
G
TOY CAMERA
TOY CAMERA
Choose for a retro toy camera e ect.
H
H
MINIATURE
MINIATURE
The tops and bottoms of pictures are blurred for a diorama e ect.
I
I
POP COLOR
POP COLOR
Create high-contrast images with saturated colors.
J
J
HIGH-KEY
HIGH-KEY
Create bright, low-contrast images.
Z
Z
LOW-KEY
LOW-KEY
Create uniformly dark tones with few areas of emphasized highlights.
K
K
DYNAMIC TONE
DYNAMIC TONE
Dynamic tone expression is used for a fantasy e ect.
X
X
SOFT FOCUS
SOFT FOCUS
Create a look that is evenly soft throughout the whole image.
u
u
PARTIAL COLOR (RED)
PARTIAL COLOR (RED)
Areas of the image that are the selected color are recorded in that color. All others areas of the im-
age are recorded in black-and-white.
v
v
PARTIAL COLOR (ORANGE)
PARTIAL COLOR (ORANGE)
w
w
PARTIAL COLOR (YELLOW)
PARTIAL COLOR (YELLOW)
x
x
PARTIAL COLOR (GREEN)
PARTIAL COLOR (GREEN)
y
y
PARTIAL COLOR (BLUE)
PARTIAL COLOR (BLUE)
z
z
PARTIAL COLOR (PURPLE)
PARTIAL COLOR (PURPLE)
R Depending on the subject and camera settings, images may in some cases be grainy or vary in brightness and hue.
F
F
AF MODE
AF MODE
(
(
default:
default:
t
t
AREA)
AREA)
Choose how the camera selects the focus area when in focus mode AF-S.
s MULTI: When the shutter button is pressed halfway, the camera detects high-contrast subjects and selects the focus area
automatically.
t AREA: Choose the focus area manually (P 48).
78
Using the Menus: Shooting Mode
C
C
AF ILLUMINATOR
AF ILLUMINATOR
(
(
default:
default:
ON)
ON)
If ON is selected, the AF-assist illuminator will light to assist autofocus.
R The AF-assist illuminator turns o automatically in silent mode.
Q The camera may be unable to focus using the AF-assist illuminator in some cases. If the camera is unable to focus in macro
mode, try increasing the distance to the subject.
Q Avoid shining the AF-assist illuminator directly into your subjects eyes.
k
k
AE/AF-LOCK MODE
AE/AF-LOCK MODE
(
(
default:
default:
AE & AF ON WHEN PRESSING)
AE & AF ON WHEN PRESSING)
If AE & AF ON WHEN PRESSING is selected, exposure and/or focus will lock while the AFL/AEL button is pressed. If AE & AF ON/
OFF SWITCH is selected, exposure and/or focus will lock while the AFL/AEL button is pressed and remain locked until the button
is pressed again.
v
v
AE/AF-LOCK BUTTON
AE/AF-LOCK BUTTON
(
(
default:
default:
AE LOCK ONLY)
AE LOCK ONLY)
Choose the role played by the AFL/AEL button (P 49).
G
G
CORRECTED AF FRAME
CORRECTED AF FRAME
(
(
default:
default:
OFF)
OFF)
If ON is selected, a second focus frame for focus distances of about 50 cm (1.6 ft.) will be added to the display in the optical
view nder. The focus frame for the current focus distance is displayed in green when the shutter button is pressed halfway.
ON
ON
OFF
OFF
Focus frame
Focus frame
Focus frame for focus distance of in nity
2000 F5.6
P
200
2000 F5.6
P
200
Focus frame for focus distance of
about 50 cm (1.6 ft.)
79
Menus
Using the Menus: Shooting Mode
I
I
FLASH
FLASH
(
(
default:
default:
±0)
±0)
Adjust  ash brightness. Choose from values between +
/
EV and –
/
EV. Note that the desired results may not be achieved
depending on shooting conditions and the distance to the subject.
B
B
RED EYE REMOVAL
RED EYE REMOVAL
(
(
default:
default:
OFF)
OFF)
Choose ON to remove red-eye e ects caused by the  ash.
R Red-eye reduction is performed only when a face is detected.
R Red-eye removal is not available with RAW images.
n
n
SAVE ORG IMAGE
SAVE ORG IMAGE
(
(
default:
default:
OFF)
OFF)
Choose ON to save unprocessed copies of pictures taken using B RED EYE REMOVAL.
80
Using the Menus: Shooting Mode
Shooting Menu Options (Movie Mode)
Shooting Menu Options (Movie Mode)
The following options are available in movie mode (P 32).
W
W
MOVIE MODE
MOVIE MODE
(
(
default:
default:
i
i
1920×1080 (30fps))
1920×1080 (30fps))
Select a frame rate for movie recording. Choose from rates of 30 and 60 fps; frame size is  xed at 1920 × 1080 (Full HD).
P
P
FILM SIMULATION
FILM SIMULATION
(
(
default:
default:
c
c
PROVIA/STANDARD)
PROVIA/STANDARD)
Simulate the e ects of di erent types of  lm (P 55).
t
t
MIC LEVEL ADJUSTMENT
MIC LEVEL ADJUSTMENT
(
(
default:
default:
3)
3)
Adjust the microphone recording level.
v
v
DISP. CUSTOM SETTING
DISP. CUSTOM SETTING
Choose the items displayed in the view nder and LCD monitor (P 75).
Y
Y
WIDE CONVERSION LENS
WIDE CONVERSION LENS
(
(
default:
default:
OFF)
OFF)
Select ON when using an optional wide conversion lens (P 108).
81
Menus
Using the Menus: Playback Mode
Using the Menus: Playback Mode
To display the playback menu, press MENU/OK in playback mode. Highlight items
and press the command dial right to view options, then highlight an option and
press MENU/OK. Press DISP/BACK to exit when settings are complete.
PLAYBACK MENU
EXIT
RAW CONVERSION
ERASE
CROP
RESIZE
PROTECT
IMAGE ROTATE
COPY
Playback Menu Options
Playback Menu Options
j
j
RAW CONVERSION
RAW CONVERSION
Create JPEG copies of RAW pictures (P 64).
A
A
ERASE
ERASE
Delete all or selected pictures (P 28).
G
G
CROP
CROP
Create a cropped copy of the current picture.
1
Display the desired picture.
2
Select G CROP in the playback menu.
3
Use the k and n buttons to zoom in and out and press the command dial up, down, left, or right to scroll the picture until
the desired portion is displayed.
4
Press MENU/OK to display a con rmation dialog.
5
Press MENU/OK again to save the cropped copy to a separate  le.
R Larger crops produce larger copies; all copies have an aspect ratio of 3 : 2. If the size of the  nal copy will be a, OK will be
displayed in yellow.
82
Using the Menus: Playback Mode
e
e
RESIZE
RESIZE
Create a cropped copy of the current picture.
1
Display the desired picture.
2
Select e RESIZE in the playback menu.
3
Highlight a size and press MENU/OK to display a con rmation dialog.
4
Press MENU/OK again to save the resized copy to a separate  le.
R The sizes available vary with the size of the original image.
D
D
PROTECT
PROTECT
Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK.
FRAME: Protect selected pictures. Press the command dial left or right to view pictures and press MENU/OK to select or deselect.
Press DISP/BACK when the operation is complete.
SET ALL: Protect all pictures.
RESET ALL: Remove protection from all pictures.
Q Protected pictures will be deleted when the memory card is formatted (P 92).
83
Menus
Using the Menus: Playback Mode
C
C
IMAGE ROTATE
IMAGE ROTATE
Rotate pictures.
1
Display the desired picture.
2
Select C IMAGE ROTATE in the playback menu.
3
Press the command dial down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise.
4
Press MENU/OK. The picture automatically be displayed in the selected orientation whenever it is played back on the camera.
R Protected pictures can not be rotated. Remove protection before rotating pictures.
R The camera may not be able to rotate pictures created with other devices. Pictures rotated on the camera will not be rotated
when viewed on a computer or on other cameras.
R Pictures taken with A SCREEN SET-UP> AUTOROTATE PB are automatically displayed in the correct orientation during
playback (P 90).
E
E
COPY
COPY
Copy pictures from internal memory to a memory card.
1
Select E COPY in the playback menu.
2
Highlight one of the following options and press the command dial right:
a INTERNAL MEMORY y b CARD: Copy pictures from internal memory to a memory card.
b CARD y a INTERNAL MEMORY: Copy pictures from a memory card to internal memory.
3
Highlight one of the following options and press MENU/OK:
FRAME: Copy selected pictures. Press the command dial left or right to view pictures and press MENU/OK to copy the current
picture.
ALL FRAMES: Copy all pictures.
R Copying ends when the destination is full.
R DPOF print information is not copied (P 101).
84
Using the Menus: Playback Mode
B
B
RED EYE REMOVAL
RED EYE REMOVAL
Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create
a copy with reduced red-eye.
1
Display the desired picture.
2
Select B RED EYE REMOVAL in the playback menu.
3
Press MENU/OK.
R Red eye may not be removed if the camera is unable to detect a face or the face is in pro le. Results may di er depending on
the scene. Red eye can not be removed from pictures that have already been processed using red-eye removal or pictures
created with other devices.
R The amount of time needed to process the image varies with the number of faces detected.
R Copies created with B RED EYE REMOVAL are indicated by a e icon during playback.
R Red eye removal can not be performed on RAW images.
I
I
SLIDE SHOW
SLIDE SHOW
View pictures in an automated slide show. Choose the type of show and press MENU/OK to start. Press DISP/BACK at any time dur-
ing the show to view on-screen help. The show can be ended at any time by pressing MENU/OK.
Option
Option
Description
Description
NORMAL
NORMAL
Press the command dial left or right to go back or skip ahead one frame. Select FADE-IN for fade transitions
between frames.
FADE-IN
FADE-IN
NORMAL
NORMAL
g
g
As above, except that camera automatically zooms in on faces.
FADE-IN
FADE-IN
g
g
MULTIPLE
MULTIPLE Display several pictures at once.
R The camera will not turn o automatically while a slide show is in progress.
85
Menus
Using the Menus: Playback Mode
m
m
PHOTOBOOK ASSIST
PHOTOBOOK ASSIST
Create books from your favorite photos (P 67).
j
j
MARK FOR UPLOAD TO
MARK FOR UPLOAD TO
Select pictures for upload to YouTube, Facebook or MyFinePix.com using MyFinePix Studio (Windows only).
1
Highlight an option and press MENU/OK. Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose
photos and movies for upload to Facebook, or MyFinePix.com to choose photos for upload to MyFinePix.com.
2
Press the command dial left or right to display pictures and press MENU/OK to select or deselect. Press DISP/BACK to exit when
all the desired pictures are selected.
R Only movies can be selected for upload to YouTube.
R Only photos can be selected for upload to MyFinePix.com.
R During playback, selected pictures are indicated by j YouTube, j FACEBOOK or j MyFinepix.com icons.
R Choose RESET ALL to deselect all pictures. If the number of pictures a ected is very large, some time may be required to
complete the operation. Press DISP/BACK to exit before the operation is complete.
Uploading Pictures (Windows Only)
Uploading Pictures (Windows Only)
Selected pictures can be uploaded using the
Selected pictures can be uploaded using the
YouTube/Facebook/MyFinePix.
YouTube/Facebook/MyFinePix.
com Upload
com Upload
option in MyFinePix Studio. For information on installing My-
option in MyFinePix Studio. For information on installing My-
FinePix Studio and connecting the camera to a computer, see “Viewing Pictures
FinePix Studio and connecting the camera to a computer, see Viewing Pictures
on a Computer” (
on a Computer” (
P
P
93
).
).
Select with camera
Upload from computer
b
b
IMAGE SEARCH
IMAGE SEARCH
Search for pictures (P 66).
86
Using the Menus: Playback Mode
K
K
PRINT ORDER (DPOF)
PRINT ORDER (DPOF)
Select pictures for printing on DPOF- and PictBridge-compatible devices (P 101).
J
J
DISP ASPECT
DISP ASPECT
Choose how High De nition (HD) devices display pictures with an aspect ratio of 3 : 2
(this option is available only when an HDMI cable is connected). Select 16 : 9 to display
the image so that it  lls the screen with its top and bottom cropped out, 3 : 2 to display
the entire image with black bands at either side.
3:2
16:9
16 : 9
16 : 9
3 : 2
3 : 2
I
I
PLAYBACK VOLUME
PLAYBACK VOLUME
(
(
default:
default:
7)
7)
Control the volume for movie playback.
87
Menus
The Setup Menu
The Setup Menu
Using the Setup Menu
Using the Setup Menu
1
Display the setup menu.
1.1 Press MENU/OK to display the menu for the current mode.
1.2 Press the command dial left to highlight the tab for the current menu.
1.3 Press the command dial down to highlight Z.
EXIT
SET-UP
DATE/TIME
TIME DIFFERENCE
RESET
SILENT MODE
FRAME NO.
FOCUS RING
CONT.
OFF
ENGLISH
Tab
1.4 Press the command dial right to place the cursor in the setup menu.
2
Adjust settings.
Highlight items and press the command dial right to view options, then highlight an option and
press MENU/OK. Press DISP/BACK to exit when settings are complete.
88
The Setup Menu
Setup Menu Options
Setup Menu Options
F
F
DATE/TIME
DATE/TIME
Set the camera clock (P 17).
N
N
TIME DIFFERENCE
TIME DIFFERENCE
(
(
default:
default:
h
h
)
)
Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the
di erence between local time and your home time zone:
1
Highlight g LOCAL and press MENU/OK.
2
Use the command dial to choose the time di erence between local time and your home time zone. Press MENU/OK when
settings are complete.
To set the camera clock to local time, highlight g LOCAL and press MENU/OK. To set the clock to the time in your home time
zone, select h HOME. If g LOCAL is selected, g will be displayed for three seconds when the camera is turned on.
L
L
a
a
Choose a language (P 17).
R
R
RESET
RESET
Reset shooting or setup menu options to default values. F DATE/TIME, N TIME DIFFERENCE,
A
A SCREEN SETUP > BACK-
GROUND COLOR, and c SHUTTER COUNT are not a ected.
1
Highlight the desired option and press the command dial right.
2
A con rmation dialog will be displayed; highlight OK and press MENU/OK.
o
o
SILENT MODE
SILENT MODE
(
(
default:
default:
OFF)
OFF)
Select ON to disable the speaker,  ash, and illuminator in situations in which camera sounds or lights may be unwelcome (note
that silent mode can not be enabled or disabled during movie playback). Silent mode can also be turned on or o using the
DISP/BACK button as described on page 5.
89
Menus
The Setup Menu
B
B
FRAME NO.
FRAME NO.
(
(
default:
default:
CONTINUOUS)
CONTINUOUS)
New pictures are stored in image  les named using a four-digit  le number assigned by adding one to the
last  le number used. The  le number is displayed during playback as shown at right. B FRAME NO. con-
trols whether  le numbering is reset to 0001 when a new memory card is inserted or the current memory
card is formatted.
Frame number
100-0001
Directory
number
File
number
Option
Option
Description
Description
CONTINUOUS
CONTINUOUS
Numbering continues from the last  le number used or the  rst available  le number, whichever is higher.
Choose this option to reduce the number of pictures with duplicate  le names.
RENEW
RENEW Numbering is reset to 0001 after formatting or when a new memory card is inserted.
R If the frame number reaches 999-9999, the shutter release will be disabled (P 116).
R Selecting R RESET (P 88) sets B FRAME NO. to CONTINUOUS but does not reset the  le number.
R Frame numbers for pictures taken with other cameras may di er.
I
I
FOCUS RING
FOCUS RING
(
(
default:
default:
X
X
CW)
CW)
Choose the direction in which the focus ring is rotated to increase the focus distance.
j
j
FOCUS CHECK
FOCUS CHECK
(
(
default:
default:
OFF)
OFF)
If ON is selected, view through the lens will automatically be magni ed in the display to assist focus when the focus ring is
rotated in manual focus mode (P 47).
M
M
FOCUS SCALE UNITS
FOCUS SCALE UNITS
(
(
default:
default:
METERS)
METERS)
Choose the units used for the focus distance indicator (P 46).
90
The Setup Menu
b
b
SOUND SET-UP
SOUND SET-UP
Adjust sound settings.
Option
Option
Description
Description
OPERATION VOL.
OPERATION VOL.
Adjust the volume of the sounds produced when camera controls are operated. Choose e OFF (mute)
to disable control sounds.
SHUTTER VOLUME
SHUTTER VOLUME
Adjust the volume of the sounds produced when the shutter is released. Choose e OFF (mute) to dis-
able the shutter sound.
SHUTTER SOUND
SHUTTER SOUND Choose the sound made by the shutter.
A
A
SCREEN SET-UP
SCREEN SET-UP
Adjust display settings.
Option
Option
Description
Description
IMAGE DISP.
IMAGE DISP.
Choose how long images are displayed after shooting. Colors may di er slightly from those in the  nal
image and “noise mottling may be visible at high sensitivities.
CONTINUOUS: Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed
halfway. To zoom in on the active focus point, press the center of the command control; press again
to cancel zoom.
1.5 SEC, 0.5 SEC: Pictures are displayed for 1.5 seconds (1.5 SEC) or 0.5 seconds (0.5 SEC) or until the
shutter button is pressed halfway.
OFF: Pictures are not displayed after shooting.
EVF/LCD BRIGHTNESS
EVF/LCD BRIGHTNESS Control the brightness of the display.
MONITOR SUNLIGHT MODE
MONITOR SUNLIGHT MODE
Select ON to make the display in the monitor easier to read in bright light (P 119).
AUTOROTATE PB
AUTOROTATE PB Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback.
BACKGROUND COLOR
BACKGROUND COLOR Choose a color scheme.
91
Menus
The Setup Menu
Z
Z
POWER MANAGEMENT
POWER MANAGEMENT
Adjust power management settings.
Option
Option
Description
Description
AUTO POWER OFF
AUTO POWER OFF
Choose the length of time before the camera turns o automatically when no operations are performed.
Shorter times reduce the drain on the battery; if OFF is selected, the camera must be turned o manually.
Note that in some situations the camera turns o automatically even when OFF is selected.
HIGH PERFORMANCE
HIGH PERFORMANCE
Select ON for faster focus and to reduce the time needed to restart the camera after it has been turned o
(P 16).
G
G
OVF POWER SAVE MODE
OVF POWER SAVE MODE
(
(
default:
default:
OFF)
OFF)
Select ON to reduce power consumption and increase the number of pictures that can be taken on a single charge when pic-
tures are framed in the optical view nder.
R When ON is selected, the histogram in the optical view nder is shown only by a frame.
c
c
SHUTTER COUNT
SHUTTER COUNT
View the approximate number of times the shutter has been released.
R The count is also incremented each time the camera is turned o , playback mode is selected, or the optical view nder is
activated.
J
J
COLOR SPACE
COLOR SPACE
(
(
default:
default:
sRGB)
sRGB)
Choose the gamut of colors available for color reproduction.
Option
Option
Description
Description
sRGB
sRGB Recommended in most situations.
Adobe RGB
Adobe RGB For commercial printing.
92
The Setup Menu
b
b
Eye-Fi TRANSFER
Eye-Fi TRANSFER
(
(
default:
default:
ON)
ON)
The camera can be used with third-party Eye-Fi cards; for more information see the manual provided with the card or contact
the manufacturer.
Option
Option
Description
Description
ON
ON Pictures taken with the camera are uploaded to a pre-selected destination.
OFF
OFF Pictures are not uploaded automatically.
Q Observe local regulations regarding the use of wireless devices when using Eye-Fi cards. Select OFF in aircraft, hospitals,
and other locations where the use of wireless devices is prohibited; note that even when the camera is turned o , wireless
transmission will continue until upload is complete.
The Eye-Fi Icon
The Eye-Fi Icon
Icon
Icon
Status
Status
U
U
Standby/no connection
U
U
(blinks)
(blinks)
Connecting
W
W
V
V
U
U
(animated)
(animated)
Upload in progress
U
U
(red)
(red)
Error
K
K
FORMAT
FORMAT
Select OK to format the memory card.
Q All data—including protected pictures—will be deleted from the memory card. Be sure important  les have been copied to
a computer or other storage device.
Q Do not open the battery-chamber cover during formatting.
93
Connections
Connections
Connections
Viewing Pictures on a Computer
Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where they can be stored, viewed,
organized, and printed. Before proceeding, install the software as described below. Do NOT connect
the camera to the computer until installation is complete.
Windows: Installing MyFinePix Studio
Windows: Installing MyFinePix Studio
1
Con rm that the computer meets the following system requirements:
Windows 8 / Windows 7 (Service Pack 1) /
Windows 8 / Windows 7 (Service Pack 1) /
Windows Vista (Service Pack 2)
Windows Vista (Service Pack 2)
1
1
Windows XP (Service Pack 3)
Windows XP (Service Pack 3)
1
1
CPU
CPU
3 GHz Pentium 4 or better
3 GHz Pentium 4 or better
(2.4
(2.4
GHz Core 2 Duo or better
GHz Core 2 Duo or better
2
2
)
)
2 GHz Pentium 4 or better
2 GHz Pentium 4 or better
(2.4
(2.4
GHz Core 2 Duo or better
GHz Core 2 Duo or better
2
2
)
)
RAM
RAM
1 GB or more
1 GB or more
512 MB or more (1
512 MB or more (1
GB or more
GB or more
2
2
)
)
Free disk space
Free disk space
2 GB or more
2 GB or more
GPU
GPU
Supports DirectX 9 or later (recommended)
Supports DirectX 9 or later (recommended)
Supports DirectX 7 or later (required; performance
Supports DirectX 7 or later (required; performance
not guaranteed with other GPUs)
not guaranteed with other GPUs)
Video
Video 1024 × 768 pixels or more with 24-bit color or better
Other
Other
Built-in USB port recommended. Operation is not guaranteed with other USB ports.
.NET Framework 3.5 Service Pack 1 required when uploading images or using Map Viewer.
Internet connection (broadband recommended) required to install .NET Framework (if necessary), to use
auto update feature, and when performing such tasks as sharing pictures on-line or via e-mail.
1 Other versions of Windows are not supported. Only pre-installed operating systems are supported; operation is not guar-
anteed on home-built computers or computers that have been upgraded from earlier versions of Windows.
2 Recommended when displaying HD movies.
2
Start the computer. Log in to an account with administrator privileges before proceeding.
94
Viewing Pictures on a Computer
3
Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
Windows 8/Windows 7/Windows Vista
Windows 8/Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control” dialog will then be displayed;
click Ye s (Windows 8/Windows 7) or Allow (Windows Vista).
The installer will start automatically; click Install MyFinePix Studio and follow the on-screen in-
structions to install MyFinePix Studio and RAW FILE CONVERTER.
If the Installer Does Not Start Automatically (Windows 7/Windows Vista)
If the Installer Does Not Start Automatically (Windows 7/Windows Vista)
If the installer does not start automatically, select Computer or My Computer from the Start menu, then
double-click the FINEPIX CD icon to open the FINEPIX CD window and double-click setup or SETUP.EXE.
If the Installer Does Not Start Automatically (Windows 8)
If the Installer Does Not Start Automatically (Windows 8)
1
Select Desktop on the Start screen.
2
Select File Explorer on the taskbar.
3
Select Computer in the navigation pane.
4
Double-click the drive icon inserting the FINEPIX CD and follow the on-screen instructions to install.
4
If prompted to install Windows Media Player or DirectX, follow the on-screen instructions to com-
plete installation.
5
Remove the installer CD from the CD-ROM drive when installation is complete. Store the installer
CD in a dry location out of direct sunlight in case you need to re-install the software.
Installation is now complete. Proceed to “Connecting the Camera (P 97).
95
Connections
Viewing Pictures on a Computer
Macintosh: Installing RAW FILE CONVERTER
Macintosh: Installing RAW FILE CONVERTER
RAW FILE CONVERTER is used to view RAW images on your computer.
1
Con rm that the computer meets the following system requirements:
CPU
CPU Intel (Core 2 Duo or better)
OS
OS
Pre-installed copies of Mac OS X version 10.6–10.8 (visit http://www.fujifilm.com/support/digital_cameras/
compatibility/ for more information).
RAM
RAM 1 GB or more
Free disk space
Free disk space A minimum of 200 MB required for installation with 400 MB available when RAW FILE CONVERTER is running
Video
Video 1024 × 768 pixels or more with 24-bit color or better
2
After starting the computer and quitting any applications that may be running, insert the installer
CD in a CD-ROM drive and double-click SILKYRFCEXInstaller.
3
Enter an administrator name and password when prompted and click OK, then follow the on-
screen instructions to install. Click Exit to quit the installer when installation is complete.
4
Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD
if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry
location out of direct sunlight in case you need to re-install the software.
Installation is now complete. Proceed to “Connecting the Camera (P 97).
96
Viewing Pictures on a Computer
Importing Pictures or Movies to Mac (Macintosh)
Importing Pictures or Movies to Mac (Macintosh)
Use a standard application in Mac OS such as Image Capture to import pictures or movies to Mac.
97
Connections
Viewing Pictures on a Computer
Connecting the Camera
Connecting the Camera
1
If the pictures you wish to copy are stored on a memory card, insert the card into the camera (P 12).
R Windows users may require the Windows CD when starting the software for the  rst time.
Q Loss of power during transfer could result in loss of data or damage to internal memory or the memory
card. Charge the battery before connecting the camera.
2
Turn the camera o and connect the supplied USB cable as
shown, making sure the connectors are fully inserted. Con-
nect the camera directly to the computer; do not use a USB
hub or keyboard.
3
Turn the camera on and follow the on-screen instructions to copy pictures to the computer. To exit
without copying pictures, click Cancel.
For more information on using the supplied software, start the application and select the appropriate
option from the Help menu.
98
Viewing Pictures on a Computer
Q If a memory card containing a large number of images is inserted, there may be a delay before the software
starts and you may be unable to import or save images. Use a memory card reader to transfer pictures.
Q Make sure that the computer does not display a message stating that copying is in progress and that the
indicator lamp is out before turning the camera o or disconnecting the USB cable (if the number of im-
ages copied is very large, the indicator lamp may remain lit after the message has cleared from the computer
display). Failure to observe this precaution could result in loss of data or damage to internal memory or the
memory card.
Q Disconnect the camera before inserting or removing memory cards.
Q In some cases, it may not be possible to access pictures saved to a network server using the supplied software
in the same way as on a standalone computer.
Q The user bears all applicable fees charged by the phone company or Internet service provider when using
services that require an Internet connection.
Disconnecting the Camera
Disconnecting the Camera
After con rming that the indicator lamp is out, turn the camera o and disconnect the USB cable.
Uninstalling the Supplied Software
Uninstalling the Supplied Software
Only uninstall the supplied software when it is no longer required or before beginning reinstallation. After
quitting the software and disconnecting the camera, drag “RAW FILE CONVERTER EX powered by SILKYPIX”
from Applications” into the Trash and select Empty Trash in the Finder menu (Macintosh), or open the control
panel and use “Programs and Features” (Windows 8/Windows 7/Windows Vista) or Add or Remove Programs”
(Windows XP) to uninstall MyFinePix Studio. Under Windows, one or more con rmation dialogs may be dis-
played; read the contents carefully before clicking OK.
99
Connections
Printing Pictures via USB
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without  rst being copied to a computer. Note that depending on the
printer, not all the functions described below may be supported.
Connecting the Camera
Connecting the Camera
1
Connect the supplied USB cable as shown and
turn the printer on.
2
Turn the camera on. t USB will be displayed
in the monitor, followed by the PictBridge dis-
play shown below at right.
USB
00
PICTBRIDGE
TOTAL:
00000
SHEETS
SETOK
FRAME
R Pictures can be printed from internal memory or a
memory card that has been formatted in the camera.
R Page size, print quality, and border selections are
made using the printer.
Printing Selected Pictures
Printing Selected Pictures
1
Press the command dial left or right
to display a picture you wish to print.
R To print one copy of the current picture, pro-
ceed directly to Step 3.
2
Press the command dial up or down
to choose the number of copies (up
to 99). Repeat steps 1–2 to select
additional pictures.
3
Press MENU/OK to display a con rma-
tion dialog.
PRINT THESE FRAMES
TOTAL:
9
SHEETS
CANCELYES
4
Press MENU/OK to start printing.
100
Printing Pictures via USB
Printing the Date of Recording
Printing the Date of Recording
To print the date of recording on pictures, press
DISP/BACK in the PictBridge display and select PRINT
WITH DATE s (to print pictures without the date of
recording, select PRINT WITHOUT DATE). To ensure
that the date is correct, set the camera clock before
taking pictures. Some printers do not support date
printing. See the printer manual for details.
Printing the DPOF Print Order
Printing the DPOF Print Order
To print the print order created with K PRINT
ORDER (DPOF) in the playback menu (P 86):
1
In the PictBridge display, press DISP/
BACK to open the PictBridge menu.
2
Press the command dial up or down
to highlight u PRINT DPOF.
PICTBRIDGE
PRINT WITH DATE
s
PRINT WITHOUT DATE
PRINT DPOF
3
Press MENU/OK to display a con rma-
tion dialog.
CANCELYES
PRINT DPOF OK?
TOTAL:
9
SHEETS
4
Press MENU/OK to start printing.
101
Connections
Printing Pictures via USB
During Printing
During Printing
The message shown at right is
displayed during printing. Press
DISP/BACK to cancel before all
pictures are printed (depending
on the printer, printing may end
before the current picture has
printed).
If printing is interrupted, turn the camera o and
then on again.
Disconnecting the Camera
Disconnecting the Camera
Con rm that the above message is not displayed and
turn the camera o . Disconnect the USB cable.
Creating a DPOF Print Order
Creating a DPOF Print Order
The K PRINT ORDER (DPOF) option in the play-
back menu can be used to create a digital “print
order for PictBridge-compatible printers or de-
vices that support DPOF.
DPOF
DPOF
DPOF (Digital Print Order Format) is stan-
dard that allows pictures to be printed from
“print orders stored on the memory card.
The information in the order includes the
pictures to be printed and the number of copies of
each picture.
CANCEL
PRINTING
102
Printing Pictures via USB
WITH DATE s/ WITHOUT DATE
To modify the DPOF print order, select K PRINT
ORDER (DPOF) in the playback menu and press
the command dial up or down to highlight WITH
DATE s or WITHOUT DATE.
PLAYBACK MENU
RED EYE REMOVAL
SLIDE SHOW
PHOTOBOOK ASSIST
MARK FOR UPLOAD TO
IMAGE SEARCH
PRINT ORDER
(
DPOF
)
DISP ASPECT
Y
WITH DATE
s
WITHOUT DATE
RESET ALL
WITH DATE s: Print date of recording
on pictures.
WITHOUT DATE: Print pictures without
date.
Press MENU/OK and follow the steps below.
1
Press the command dial left or right
to display a picture you wish to in-
clude in or remove from the print
order.
2
Press the command dial up or down
to choose the number of copies (up
to 99). To remove a picture from
the order, press the command dial
down until the number of copies is
0.
01
PRINT ORDER
(
DPOF
)
SHEETS
SETFRAME
DPOF:
00001
Total number of prints
Number of copies
3
Repeat steps 1–2 to complete the
print order. Press MENU/OK to save
the print order when settings are
complete, or DISP/BACK to exit with-
out changing the print order.
103
Connections
Printing Pictures via USB
4
The total number of prints is dis-
played in the monitor. Press MENU/
OK to exit.
The pictures in the current
print order are indicated by a
u icon during playback.
RESET ALL
To cancel the current print
order, select RESET ALL for
K PRINT ORDER (DPOF). The
con rmation shown at right
will be displayed; press MENU/OK
to remove all pictures from the
order.
R Print orders can contain a maximum of 999 pictures.
R If a memory card is inserted
containing a print order cre-
ated by another camera, the
message shown at right will
be displayed. Pressing MENU/OK
cancels the print order; a new
print order must be created as
described above.
CANCELYES
RESET DPOF OK?
NOYES
RESET DPOF OK?
104
Viewing Pictures on TV
Viewing Pictures on TV
To show pictures to a group, connect the camera to a TV using an HDMI cable (available separately
from third-party suppliers; note that the TV can only be used for playback, not shooting).
1
Turn the camera o .
2
Connect the cable as shown below.
Insert into
HDMI mini connector
Insert into
HDMI connector
R Be sure the connectors are fully inserted.
3
Tune the television to the HDMI input channel. See the documentation supplied with the televi-
sion for details.
4
Turn the camera on and press a button. The camera monitor turns o and pictures and movies
are played back on the TV. Note that the camera volume controls have no e ect on sounds played
on the TV; use the television volume controls to adjust the volume.
R The USB cable can not be used while an HDMI cable is connected.
R Some televisions may brie y display a black screen when movie playback begins.
105
Technical Notes
Technical Notes
Technical Notes
Optional Accessories
Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
Accessories from FUJIFILM
Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM. For the latest information on the accesso-
ries available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.com/
products/digital_cameras/index.html.
Rechargeable Li-ion batteries
Rechargeable Li-ion batteries
NP-95: Additional large-capacity NP-95 rechargeable batteries can be purchased as required.
Battery chargers
Battery chargers
BC-65N: Replacement battery chargers can be purchased as required. At +20 °C/+68 °F, the BC-65N charges
an NP-95 in about 210 minutes.
Shoe-mounted  ash units
Shoe-mounted  ash units
EF-20: This clip-on  ash unit (powered by two AA batteries) has a Guide Number of 20/65 (ISO 100, m/ft.)
and supports TTL  ash control. The  ash head can be rotated upwards 90° for bounce lighting.
EF-42: This clip-on  ash unit (powered by four AA batteries) has a Guide Number of 42/137 (ISO 100, m/ft.)
and supports TTL  ash control and auto power zoom in the range 24–105 mm (35 mm format equivalent).
The  ash head can be rotated 90° up, 180° left, or 120° right for bounce lighting.
EF-X20: This clip-on  ash unit has a Guide Number of 20/65 (ISO 100, m/ft.).
106
Optional Accessories
Leather cases
Leather cases
LC-X100S: This leather case, exclusively for use with the X100S/X100, combines practicality with the luxury of leather and comes
with a shoulder strap made of the same material. Pictures can be taken and batteries and memory cards inserted or removed
with the camera still in its case.
Adapter rings
Adapter rings
AR-X100: An aluminum adapter ring exclusively for use with the X100S/X100. It is used when attaching the
LH-X100 lens hood or φ49 mm  lters available from third-party suppliers.
Lens hoods
Lens hoods
LH-X100: This aluminum lens hood, exclusively for use with the X100S/X100, comes with an AR-X100 adapt-
er ring made of the same material. The adapter ring is required when attaching the hood.
Protector  lters
Protector  lters
PRF-49S: A protective  lter exclusively for use with the X100S/X100. Requires AR-X100 adapter ring.
Wide conversion lenses
Wide conversion lenses
WCL-X100: A conversion lens that increases picture angle.
Stereo microphones
Stereo microphones
MIC-ST1: An external microphone for movie recording.
107
Technical Notes
Optional Accessories
Attaching Adapter Rings
Attaching Adapter Rings
1
Remove the front ring.
R
R
If you have trouble re-
If you have trouble re-
moving the front ring,
moving the front ring,
grip the entire ring and
grip the entire ring and
rotate it as shown.
rotate it as shown.
2
Attach the adapter ring
as shown, with the pro-
jections facing out.
Q Keep the front ring and lens cap in a safe place
when not in use.
Q Attach the adapter ring before attaching LH-X100
lens hood, PRF-49S protector  lter, or third-party
lters.
Attaching Lens Hoods
Attaching Lens Hoods
Attach the adapter ring
Attach the adapter ring
before attaching the lens
before attaching the lens
hood.
hood.
R
R
Align the indentations and
Align the indentations and
rotate as shown.
rotate as shown.
Attaching Protector Filters
Attaching Protector Filters
Attach the adapter ring be-
Attach the adapter ring be-
fore attaching the  lter.
fore attaching the  lter.
108
Optional Accessories
The WCL-X100 Wide Conversion Lens
The WCL-X100 Wide Conversion Lens
A Y WIDE CONVERSION LENS option has been
added to the shooting menu for use with the op-
tional WCL-X100 wide conversion lens. Select ON
when using the WCL-X100.
R A Y icon is displayed when
ON is selected.
P
2000
F5. 6
200
R Because the optical view nd-
er does not cover the full  eld
of view of the conversion lens,
the bright frame is replaced
by brackets showing approxi-
mately 80% of the  eld of
view. For accurate framing, compose pictures using
the electronic view nder or LCD monitor.
R The WCL-X100 may cast shadows in pictures taken
with the built-in  ash. Use an optional external  ash
approved for the X100.
R Y WIDE CONVERSION LENS can be assigned to
the Fn button.
R Be sure to select OFF for Y WIDE CONVERSION
LENS when the WCL-X100 is not in use.
Attaching the WCL-X100
1
Remove the front ring.
R If you have trouble re-
moving the front ring,
grip the entire ring and
rotate it as shown.
2
Attach the wide conver-
sion lens.
Q Keep the front ring and lens cap in a safe place
when not in use.
2000 F5.6
P
200
109
Technical Notes
Optional Accessories
Connecting the Camera to Other Devices
Connecting the Camera to Other Devices
X100S
Computer Related
Computer Related
Computer
Printing
Printing
Printer
PictBridge-compatible printer
* Available separately from FUJIFILM.
Available separately from third-party suppliers.
USB cable (supplied)
USB cable
(supplied)
SD/SDHC/SDXC
memory card
HDTV
MIC-ST1 stereo microphone
*
External Microphones
External Microphones
Flash Photography
Flash Photography
EF-20 shoe mount
ash
*
EF-42 shoe mount
ash
*
EF-X20 shoe
mount  ash
*
Remote Shutter Release
Remote Shutter Release
Remote release
Audio/Visual
Audio/Visual
HDMI cable
110
Caring for the Camera
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Storage and Use
Storage and Use
If the camera will not be used for an extended pe-
riod, remove the battery and memory card. Do
not store or use the camera in locations that are:
exposed to rain, steam, or smoke
very humid or extremely dusty
exposed to direct sunlight or very high temper-
atures, such as in a closed vehicle on a sunny
day
• extremely cold
subject to strong vibration
exposed to strong magnetic  elds, such as near
a broadcasting antenna, power line, radar emit-
ter, motor, transformer, or magnet
in contact with volatile chemicals such as pes-
ticides
next to rubber or vinyl products
Water and Sand
Exposure to water and sand can also damage the
camera and its internal circuitry and mechanisms.
When using the camera at the beach or seaside,
avoid exposing the camera to water or sand. Do
not place the camera on a wet surface.
Condensation
Sudden increases in temperature, such as occur
when entering a heated building on a cold day,
can cause condensation inside the camera. If this
occurs, turn the camera o and wait an hour be-
fore turning it on again. If condensation forms on
the memory card, remove the card and wait for
the condensation to dissipate.
Traveling
Traveling
Keep the camera in your carry-on baggage.
Checked baggage may su er violent shocks that
could damage the camera.
111
Troubleshooting
Troubleshooting
Troubleshooting
Problems and Solutions
Problems and Solutions
Power and Battery
Power and Battery
Problem
Problem
Solution
Solution
The camera does not
The camera does not
turn on.
turn on.
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
11) or insert a fully-charged spare battery (
11) or insert a fully-charged spare battery (
P
P
12).
12).
The battery is inserted incorrectly
The battery is inserted incorrectly
: Reinsert in the correct orientation (
: Reinsert in the correct orientation (
P
P
12).
12).
The battery-chamber cover is not latched
The battery-chamber cover is not latched
: Latch the battery-chamber cover (
: Latch the battery-chamber cover (
P
P
13).
13).
The monitor does not
The monitor does not
turn on.
turn on.
The monitor may not turn on if the camera is turned off and then on again very quickly. Press the shutter button
The monitor may not turn on if the camera is turned off and then on again very quickly. Press the shutter button
halfway to activate the monitor.
halfway to activate the monitor.
The battery runs down
The battery runs down
quickly.
quickly.
The battery is cold
The battery is cold
: Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera
: Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera
immediately before taking a picture.
immediately before taking a picture.
There is dirt on the battery terminals
There is dirt on the battery terminals
: Clean the terminals with a soft, dry cloth.
: Clean the terminals with a soft, dry cloth.
C is selected for focus mode
C is selected for focus mode
: Select a diff erent focus mode (
: Select a diff erent focus mode (
P
P
46).
46).
The battery has been charged many times
The battery has been charged many times
: The battery has reached the end of its charging life. Purchase a new
: The battery has reached the end of its charging life. Purchase a new
battery.
battery.
The camera turns o
The camera turns o
suddenly.
suddenly.
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
11) or insert a fully-charged spare battery (
11) or insert a fully-charged spare battery (
P
P
12).
12).
Charging does not start.
Charging does not start.
Reinsert the battery in the correct orientation and make sure that the charger is plugged in (
Reinsert the battery in the correct orientation and make sure that the charger is plugged in (
P
P
11).
11).
Charging is slow.
Charging is slow.
Charge the battery at room temperature (
Charge the battery at room temperature (
P
P
iv).
iv).
The charging lamp blinks,
The charging lamp blinks,
but the battery does not
but the battery does not
charge.
charge.
There is dirt on the battery terminals
There is dirt on the battery terminals
: Clean the terminals with a soft, dry cloth.
: Clean the terminals with a soft, dry cloth.
The battery has been charged many times
The battery has been charged many times
: The battery has reached the end of its charging life. Purchase a new
: The battery has reached the end of its charging life. Purchase a new
battery. If the battery still fails to charge, contact your FUJIFILM dealer.
battery. If the battery still fails to charge, contact your FUJIFILM dealer.
Menus and Displays
Menus and Displays
Problem
Problem
Solution
Solution
Display is not in English.
Display is not in English.
Select
Select
ENGLISH
ENGLISH
for
for
L
L
a
a
(
(
P
P
88).
88).
112
Problems and Solutions
Shooting
Shooting
Problem
Problem
Solution
Solution
No picture is taken when
No picture is taken when
the shutter button is
the shutter button is
pressed.
pressed.
Memory is full: Insert a new memory card or delete pictures
(
(
P
P
12, 28).
12, 28).
Memory is not formatted: Format the memory card or internal memory
(
(
P
P
92).
92).
There is dirt on the memory card contacts
There is dirt on the memory card contacts
: Clean the contacts with a soft, dry cloth.
: Clean the contacts with a soft, dry cloth.
The memory card is damaged
The memory card is damaged
: Insert a new memory card (
: Insert a new memory card (
P
P
12).
12).
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
11) or insert a fully-charged spare battery (
11) or insert a fully-charged spare battery (
P
P
12).
12).
The camera has turned o automatically
The camera has turned o automatically
: Turn the camera on (
: Turn the camera on (
P
P
16).
16).
The indicator lamp was orange when you attempted to record a panorama
The indicator lamp was orange when you attempted to record a panorama
: Wait until the indicator lamps turns off
: Wait until the indicator lamps turns off
(
(
P
P
3).
3).
Mottling (“noise”) appears
Mottling (“noise”) appears
in the monitor or
in the monitor or
electronic view nder
electronic view nder
when the shutter button is
when the shutter button is
pressed halfway.
pressed halfway.
Gain is increased to aid composition when the subject is poorly lit and aperture is stopped down, which may result
Gain is increased to aid composition when the subject is poorly lit and aperture is stopped down, which may result
in noticeable mottling when images are previewed in the displays. Images taken with the camera are unaff ected.
in noticeable mottling when images are previewed in the displays. Images taken with the camera are unaff ected.
The display goes dark after
The display goes dark after
shooting.
shooting.
The display may darken while the fl ash charges. Wait for the fl ash to charge.
The display may darken while the fl ash charges. Wait for the fl ash to charge.
The camera does not focus.
The camera does not focus.
The subject is close to the camera
The subject is close to the camera
: Select macro mode (
: Select macro mode (
P
P
31).
31).
The subject is far away from the camera
The subject is far away from the camera
: Cancel macro mode (
: Cancel macro mode (
P
P
31).
31).
The subject is not suited to autofocus
The subject is not suited to autofocus
: Use focus lock (
: Use focus lock (
P
P
49) or manual focus (
49) or manual focus (
P
P
46).
46).
The  ash does not  re.
The  ash does not  re.
The  ash can not be used at current settings
The  ash can not be used at current settings
: See the list of the settings that can be used with the fl ash (
: See the list of the settings that can be used with the fl ash (
P
P
127).
127).
The  ash is o (
The  ash is o (
P
P
)
)
: Choose a diff erent fl ash mode (
: Choose a diff erent fl ash mode (
P
P
29).
29).
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
11) or insert a fully-charged spare battery (
11) or insert a fully-charged spare battery (
P
P
12).
12).
The camera is in bracketing or continuous mode
The camera is in bracketing or continuous mode
: Select single frame mode (
: Select single frame mode (
P
P
56, 58).
56, 58).
The camera is in silent mode
The camera is in silent mode
: Turn silent mode off (
: Turn silent mode off (
P
P
5).
5).
113
Troubleshooting
Problems and Solutions
Problem
Problem
Solution
Solution
Some  ash modes are not
Some  ash modes are not
available.
available.
The camera is in silent mode. Turn silent mode off (
The camera is in silent mode. Turn silent mode off (
P
P
5).
5).
The  ash does not fully
The  ash does not fully
light the subject.
light the subject.
The subject is not in range of the  ash
The subject is not in range of the  ash
: Position the subject in range of the fl ash (
: Position the subject in range of the fl ash (
P
P
121).
121).
The  ash window is obstructed
The  ash window is obstructed
: Hold the camera correctly (
: Hold the camera correctly (
P
P
23).
23).
Shutter speed is faster than
Shutter speed is faster than
/
/


s
s
: Choose a slower shutter speed (
: Choose a slower shutter speed (
P
P
30, 37, 39).
30, 37, 39).
Pictures are blurred.
Pictures are blurred.
The lens is dirty
The lens is dirty
: Clean the lens (
: Clean the lens (
P
P
ix).
ix).
The lens is blocked
The lens is blocked
: Keep objects away from the lens.
: Keep objects away from the lens.
s
s
is displayed during shooting and the focus frame is displayed in red
is displayed during shooting and the focus frame is displayed in red
: Check focus before shooting (
: Check focus before shooting (
P
P
24).
24).
k
k
is displayed during shooting
is displayed during shooting
: Use the fl ash or mount the camera on a tripod (
: Use the fl ash or mount the camera on a tripod (
P
P
29).
29).
Pictures are mottled.
Pictures are mottled.
Shutter speed is slow and the ambient temperature is high
Shutter speed is slow and the ambient temperature is high
: This is normal and does not indicate a malfunction.
: This is normal and does not indicate a malfunction.
The camera has been used continuously at high temperatures or a temperature warning is displayed
The camera has been used continuously at high temperatures or a temperature warning is displayed
: Turn the cam-
: Turn the cam-
era off and wait for it to cool down.
era off and wait for it to cool down.
Playback
Playback
Problem
Problem
Solution
Solution
Pictures are grainy.
Pictures are grainy.
The pictures were taken with a diff erent make or model of camera.
The pictures were taken with a diff erent make or model of camera.
Playback zoom is unavail-
Playback zoom is unavail-
able.
able.
The pictures were created using
The pictures were created using
O
O
RESIZE
RESIZE
or with a diff erent make or model of camera.
or with a diff erent make or model of camera.
No sound in movie
No sound in movie
playback.
playback.
Playback volume is too low
Playback volume is too low
: Adjust playback volume (
: Adjust playback volume (
P
P
86).
86).
The microphone was obstructed
The microphone was obstructed
: Hold the camera correctly during recording (
: Hold the camera correctly during recording (
P
P
2, 32).
2, 32).
The speaker is obstructed
The speaker is obstructed
: Hold the camera correctly during playback (
: Hold the camera correctly during playback (
P
P
2, 33).
2, 33).
The camera is in silent mode
The camera is in silent mode
: Turn silent mode off (
: Turn silent mode off (
P
P
5).
5).
Selected pictures are not
Selected pictures are not
deleted.
deleted.
Some of the pictures selected for deletion are protected. Remove protection using the device with which it was
Some of the pictures selected for deletion are protected. Remove protection using the device with which it was
originally applied (
originally applied (
P
P
82).
82).
File numbering is unex-
File numbering is unex-
pectedly reset.
pectedly reset.
The battery-chamber cover was opened while the camera was on. Turn the camera off before opening the bat-
The battery-chamber cover was opened while the camera was on. Turn the camera off before opening the bat-
tery-chamber cover (
tery-chamber cover (
P
P
12, 16).
12, 16).
114
Problems and Solutions
Connections/Miscellaneous
Connections/Miscellaneous
Problem
Problem
Solution
Solution
No picture or sound.
No picture or sound.
The camera is not properly connected
The camera is not properly connected
: Connect the camera properly (
: Connect the camera properly (
P
P
104
). Note that once the camera is con-
). Note that once the camera is con-
nected, pictures will be displayed on the TV instead of in the camera monitor.
nected, pictures will be displayed on the TV instead of in the camera monitor.
Input on the television is set to “TV”
Input on the television is set to “TV”
: Set input to “HDMI”.
: Set input to “HDMI”.
The volume on the TV is too low
The volume on the TV is too low
: Use the controls on the television to adjust the volume.
: Use the controls on the television to adjust the volume.
The computer does not
The computer does not
recognize the camera.
recognize the camera.
Be sure the camera and computer are correctly connected (
Be sure the camera and computer are correctly connected (
P
P
97
).
).
Can not transfer RAW or
Can not transfer RAW or
JPEG  les to computer.
JPEG  les to computer.
Use the bundled software to transfer pictures (
Use the bundled software to transfer pictures (
P
P
93
).
).
Pictures can not be
Pictures can not be
printed.
printed.
The camera is not properly connected
The camera is not properly connected
: Connect the camera correctly (
: Connect the camera correctly (
P
P
99
).
).
The printer is o
The printer is o
: Turn the printer on.
: Turn the printer on.
Only one copy is printed/
Only one copy is printed/
the date is not printed.
the date is not printed.
The printer is not PictBridge compatible.
The printer is not PictBridge compatible.
The camera is unrespon-
The camera is unrespon-
sive.
sive.
Temporary camera malfunction
Temporary camera malfunction
: Remove and reinsert the battery (
: Remove and reinsert the battery (
P
P
12, 14).
12, 14).
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
11) or insert a fully-charged spare battery (
11) or insert a fully-charged spare battery (
P
P
12).
12).
The camera does not func-
The camera does not func-
tion as expected.
tion as expected.
Remove and reinsert the battery (
Remove and reinsert the battery (
P
P
12, 14). If the problem persists, contact your FUJIFILM dealer.
12, 14). If the problem persists, contact your FUJIFILM dealer.
No sound.
No sound.
Turn silent mode off (
Turn silent mode off (
P
P
5).
5).
115
Troubleshooting
Warning Messages and Displays
Warning Messages and Displays
The following warnings appear in the display.
Warning
Warning
Description
Description
B
B
(red)
(red)
Low battery. Charge the battery (
Low battery. Charge the battery (
P
P
11) or insert a fully-charged spare battery (
11) or insert a fully-charged spare battery (
P
P
12).
12).
A
A
(blinks red)
(blinks red)
Battery exhausted. Charge the battery (
Battery exhausted. Charge the battery (
P
P
11) or insert a fully-charged spare battery (
11) or insert a fully-charged spare battery (
P
P
12).
12).
k
k
Slow shutter speed. Pictures may be blurred; use the fl ash or a tripod.
Slow shutter speed. Pictures may be blurred; use the fl ash or a tripod.
s
s
(displayed in red with
(displayed in red with
red focus frame)
red focus frame)
The camera can not focus. Try one of the following solutions:
The camera can not focus. Try one of the following solutions:
Use focus lock to focus on another subject at the same distance, then recompose the picture (
Use focus lock to focus on another subject at the same distance, then recompose the picture (
P
P
49).
49).
Use macro mode to focus when taking close-ups (
Use macro mode to focus when taking close-ups (
P
P
31).
31).
Aperture or shutter speed
Aperture or shutter speed
displayed in red
displayed in red
The subject is too bright or too dark and the picture will be over- or under-exposed. Use the ash for additional
The subject is too bright or too dark and the picture will be over- or under-exposed. Use the fl ash for additional
lighting when taking photographs of poorly-lit subjects (
lighting when taking photographs of poorly-lit subjects (
P
P
29).
29).
FOCUS ERROR
FOCUS ERROR
Camera malfunction. Turn the camera off and then on again. If the message persists, contact a FUJIFILM dealer.
Camera malfunction. Turn the camera off and then on again. If the message persists, contact a FUJIFILM dealer.
TURN OFF THE CAMERA
TURN OFF THE CAMERA
AND TURN ON AGAIN
AND TURN ON AGAIN
LENS CONTROL ERROR
LENS CONTROL ERROR
BUSY
BUSY
The memory card is incorrectly formatted. Use the camera to format the card (
The memory card is incorrectly formatted. Use the camera to format the card (
P
P
92).
92).
CARD NOT INITIALIZED
CARD NOT INITIALIZED
The memory card or internal memory is not formatted or the memory card has been formatted in a computer or other
The memory card or internal memory is not formatted or the memory card has been formatted in a computer or other
device
device
: Format the memory card or internal memory using the
: Format the memory card or internal memory using the
K
K
FORMAT
FORMAT
option in the camera setup menu
option in the camera setup menu
(
(
P
P
92).
92).
The memory card contacts require cleaning
The memory card contacts require cleaning
: Clean the contacts with a soft, dry cloth. If the message is repeated,
: Clean the contacts with a soft, dry cloth. If the message is repeated,
format the card (
format the card (
P
P
92). If the message persists, replace the card.
92). If the message persists, replace the card.
Camera malfunction
Camera malfunction
: Contact a FUJIFILM dealer.
: Contact a FUJIFILM dealer.
PROTECTED CARD
PROTECTED CARD
The memory card is locked. Unlock the card (
The memory card is locked. Unlock the card (
P
P
13).
13).
116
Warning Messages and Display
Warning
Warning
Description
Description
CARD ERROR
CARD ERROR
The memory card is not formatted for use in the camera
The memory card is not formatted for use in the camera
: Format the card (
: Format the card (
P
P
92).
92).
The memory card contacts require cleaning or the memory card is damaged
The memory card contacts require cleaning or the memory card is damaged
: Clean the contacts with a soft, dry
: Clean the contacts with a soft, dry
cloth. If the message is repeated, format the card (
cloth. If the message is repeated, format the card (
P
P
92). If the message persists, replace the card.
92). If the message persists, replace the card.
Incompatible memory card
Incompatible memory card
: Use a compatible card (
: Use a compatible card (
P
P
15).
15).
Camera malfunction
Camera malfunction
: Contact a FUJIFILM dealer.
: Contact a FUJIFILM dealer.
b
b
MEMORY FULL
MEMORY FULL
The memory card or internal memory is full and pictures can not be recorded or copied. Delete pictures (
The memory card or internal memory is full and pictures can not be recorded or copied. Delete pictures (
P
P
28) or
28) or
insert a memory card with more free space (
insert a memory card with more free space (
P
P
12).
12).
a
a
MEMORY FULL
MEMORY FULL
INTERNAL MEMORY IS FULL
INTERNAL MEMORY IS FULL
INSERT A NEW CARD
INSERT A NEW CARD
NO CARD
NO CARD
No memory card inserted when
No memory card inserted when
E
E
COPY
COPY
is selected. Insert a memory card.
is selected. Insert a memory card.
WRITE ERROR
WRITE ERROR
Memory card error or connection error
Memory card error or connection error
: Reinsert the card or turn the camera off and then on again. If the message
: Reinsert the card or turn the camera off and then on again. If the message
persists, contact a FUJIFILM dealer.
persists, contact a FUJIFILM dealer.
Not enough memory remaining to record additional pictures
Not enough memory remaining to record additional pictures
: Delete pictures (
: Delete pictures (
P
P
28) or insert a memory card with
28) or insert a memory card with
more free space (
more free space (
P
P
12).
12).
The memory card or internal memory is not formatted
The memory card or internal memory is not formatted
: Format the memory card or internal memory (
: Format the memory card or internal memory (
P
P
92).
92).
READ ERROR
READ ERROR
The  le is corrupt or was not created with the camera
The  le is corrupt or was not created with the camera
: The fi le can not be viewed.
: The fi le can not be viewed.
The memory card contacts require cleaning
The memory card contacts require cleaning
: Clean the contacts with a soft, dry cloth. If the message is repeated,
: Clean the contacts with a soft, dry cloth. If the message is repeated,
format the card (
format the card (
P
P
92). If the message persists, replace the card.
92). If the message persists, replace the card.
Camera malfunction
Camera malfunction
: Contact a FUJIFILM dealer.
: Contact a FUJIFILM dealer.
FRAME NO. FULL
FRAME NO. FULL
The camera has run out of frame numbers (current frame number is 999-9999). Format the memory card and
The camera has run out of frame numbers (current frame number is 999-9999). Format the memory card and
select
select
RENEW
RENEW
for
for
B
B
FRAME NO.
FRAME NO.
Take a picture to reset frame numbering to 100-0001, then select
Take a picture to reset frame numbering to 100-0001, then select
CONTINU-
CONTINU-
OUS
OUS
for
for
B
B
FRAME NO.
FRAME NO.
(
(
P
P
89).
89).
PRESS AND HOLD
PRESS AND HOLD
THE DISP BUTTON TO
THE DISP BUTTON TO
DEACTIVATE SILENT MODE
DEACTIVATE SILENT MODE
An attempt was made to choose a ash mode or adjust the volume with the camera in silent mode. Exit silent
An attempt was made to choose a fl ash mode or adjust the volume with the camera in silent mode. Exit silent
mode before choosing a fl ash mode or adjusting the volume (
mode before choosing a fl ash mode or adjusting the volume (
P
P
5).
5).
117
Troubleshooting
Warning Messages and Display
Warning
Warning
Description
Description
TOO MANY FRAMES
TOO MANY FRAMES
A search has returned more than 30,000 results
A search has returned more than 30,000 results
: Choose a search that returns fewer results.
: Choose a search that returns fewer results.
More than 999 images are selected for deletion
More than 999 images are selected for deletion
: Choose fewer images.
: Choose fewer images.
PROTECTED FRAME
PROTECTED FRAME
An attempt was made to delete or rotate to a protected picture. Remove protection and try again (
An attempt was made to delete or rotate to a protected picture. Remove protection and try again (
P
P
82).
82).
CAN NOT CROP
CAN NOT CROP
The picture is damaged or was not created with the camera.
The picture is damaged or was not created with the camera.
m
m
CANNOT EXECUTE
CANNOT EXECUTE
Red-eye removal can not be applied to pictures created with other devices.
Red-eye removal can not be applied to pictures created with other devices.
F
F
CANNOT EXECUTE
CANNOT EXECUTE
Red-eye removal can not be applied to movies.
Red-eye removal can not be applied to movies.
CAN NOT ROTATE
CAN NOT ROTATE
The selected picture can not be rotated.
The selected picture can not be rotated.
F
F
CAN NOT ROTATE
CAN NOT ROTATE
Movies can not be rotated.
Movies can not be rotated.
b
b
NO IMAGE
NO IMAGE
The source selected for
The source selected for
E
E
COPY
COPY
contains no images. Select a diff erent source.
contains no images. Select a diff erent source.
a
a
NO IMAGE
NO IMAGE
DPOF FILE ERROR
DPOF FILE ERROR
The DPOF print order on the current memory card contains more than 999 images. Copy the pictures to a com-
The DPOF print order on the current memory card contains more than 999 images. Copy the pictures to a com-
puter and create a new print order.
puter and create a new print order.
CAN NOT SET DPOF
CAN NOT SET DPOF
The picture can not be printed using DPOF.
The picture can not be printed using DPOF.
F
F
CAN NOT SET DPOF
CAN NOT SET DPOF
Movies can not be printed using DPOF.
Movies can not be printed using DPOF.
COMMUNICATION ERROR
COMMUNICATION ERROR
A connection error occurred while pictures were being printed or copied to a computer or other device. Confi rm
A connection error occurred while pictures were being printed or copied to a computer or other device. Confi rm
that the device is turned on and that the USB cable is connected.
that the device is turned on and that the USB cable is connected.
PRINTER ERROR
PRINTER ERROR
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). To resume printing,
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). To resume printing,
turn the printer off and then turn it back on.
turn the printer off and then turn it back on.
PRINTER ERROR
PRINTER ERROR
RESUME?
RESUME?
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If printing does not
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If printing does not
resume automatically, press
resume automatically, press
MENU/OK
MENU/OK
to resume.
to resume.
CANNOT BE PRINTED
CANNOT BE PRINTED
An attempt was made to print a movie, a picture not created with the camera, or a picture in a format not sup-
An attempt was made to print a movie, a picture not created with the camera, or a picture in a format not sup-
ported by the printer. Movies, RAW images, and some pictures created with other devices can not be printed; if
ported by the printer. Movies, RAW images, and some pictures created with other devices can not be printed; if
the picture is a still picture created with the camera, check the printer manual to confi rm that the printer supports
the picture is a still picture created with the camera, check the printer manual to confi rm that the printer supports
the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures can not be printed.
the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures can not be printed.
p
p
Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.
Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.
118
Appendix
Appendix
Glossary
Glossary
Exif Print: A standard for storing information with pictures for optimal color reproduction during printing.
HDMI (High-De nition Multimedia Interface): An interface standard for the transmission of images and sound that
adds audio input to the DVI interface used to connect computers to displays.
JPEG (Joint Photographic Experts Group): A compressed  le format for color images. The higher the compression
rate, the greater the loss of information and more noticeable drop in quality when the picture is displayed.
MOV: A movie  le format (extension .mov”) developed by Apple, Inc., and viewed using QuickTime Player. This
format is popular on the Internet.
White balance: The human brain automatically adapts to changes in the color of light, with the result that objects
that appear white under one light source still appear white when the color of the light source changes. Digital
cameras can mimic this adjustment by processing images according to the color of the light source. This process
is known as white balance.
119
Appendix
Memory Card Capacity
Memory Card Capacity
The following table shows the recording time or number of pictures available at di erent image sizes.
All  gures are approximate;  le size varies with the scene recorded, producing wide variations in the
number of  les that can be stored. The number of exposures or length remaining may not diminish at
an even rate. A limited number of test pictures can be taken when no memory card is inserted.
Capacity
Capacity
O
O
4 GB
4 GB
8 GB
8 GB
T
T
FINE
FINE
T
T
NORMAL
NORMAL
T
T
FINE
FINE
T
T
NORMAL
NORMAL
Photographs
Photographs
O
O
3 : 2
3 : 2
600
600
960
960
1210
1210
1910
1910
O
O
16 : 9
16 : 9
710
710
1130
1130
1420
1420
2260
2260
O
O
1 : 1
1 : 1
900
900
1410
1410
1800
1800
2810
2810
P
P
3 : 2
3 : 2
960
960
1880
1880
1910
1910
3740
3740
P
P
16 : 9
16 : 9
1130
1130
2230
2230
2260
2260
4430
4430
P
P
1 : 1
1 : 1
1430
1430
2740
2740
2850
2850
5440
5440
Q
Q
3 : 2
3 : 2
1790
1790
3440
3440
3570
3570
6840
6840
Q
Q
16 : 9
16 : 9
2110
2110
4020
4020
4200
4200
7990
7990
Q
Q
1 : 1
1 : 1
2670
2670
5020
5020
5320
5320
9980
9980
RAW
RAW
120
120
230
230
Movies
Movies
*
*
i
i
1920×1080 (60 fps)/
1920×1080 (60 fps)/
i
i
1920×1080 (30 fps)
1920×1080 (30 fps)
13 min.
13 min.
26 min.
26 min.
* Use a H card or better. Individual movies can not exceed 10 minutes in length.
120
Speci cations
Speci cations
System
Model
Model
FUJIFILM X100S
FUJIFILM X100S
digital camera
digital camera
E ective pixels
E ective pixels
16.3 million
16.3 million
Image sensor
Image sensor
23.6 × 15.6 mm (APS-C), X-Trans CMOS II sensor with square pixels and primary color fi lter
23.6 × 15.6 mm (APS-C), X-Trans CMOS II sensor with square pixels and primary color fi lter
Storage media
Storage media
Internal memory
Internal memory
(approx. 24 MB)
(approx. 24 MB)
SD/SDHC/SDXC memory cards
SD/SDHC/SDXC memory cards
File system
File system
Compliant with
Compliant with
D
D
esign Rule for
esign Rule for
C
C
amera
amera
F
F
ile System
ile System
(DCF)
(DCF)
, Exif 2.3, and
, Exif 2.3, and
D
D
igital
igital
P
P
rint
rint
O
O
rder
rder
F
F
ormat
ormat
(DPOF)
(DPOF)
File format
File format
Still pictures
Still pictures
: Exif 2.3 JPEG
: Exif 2.3 JPEG
(compressed)
(compressed)
; RAW
; RAW
(original RAF format, special-purpose software required)
(original RAF format, special-purpose software required)
; RAW+JPG available
; RAW+JPG available
Movies
Movies
: H.264 standard with linear PCM stereo sound
: H.264 standard with linear PCM stereo sound
(MOV)
(MOV)
Image size
Image size
O
O
3 : 2
3 : 2
: 4,896 × 3,264
: 4,896 × 3,264
P
P
3 : 2
3 : 2
: 3,456 × 2,304
: 3,456 × 2,304
Q
Q
3 : 2
3 : 2
: 2,496 × 1,664
: 2,496 × 1,664
O
O
16 : 9
16 : 9
: 4,896 × 2,760
: 4,896 × 2,760
P
P
16 : 9
16 : 9
: 3,456 × 1,944
: 3,456 × 1,944
Q
Q
16 : 9
16 : 9
: 2,496 × 1,408
: 2,496 × 1,408
O
O
1 : 1
1 : 1
: 3,264 × 3,264
: 3,264 × 3,264
P
P
1 : 1
1 : 1
: 2,304 × 2,304
: 2,304 × 2,304
Q
Q
1 : 1
1 : 1
: 1,664 × 1,664
: 1,664 × 1,664
180 panorama
180 panorama
: 2,160 × 9,600
: 2,160 × 9,600
(vertical)
(vertical)
/ 9,600 × 1,440
/ 9,600 × 1,440
(horizontal)
(horizontal)
120 panorama
120 panorama
: 2,160 × 6,440
: 2,160 × 6,440
(vertical)
(vertical)
/ 6,400 × 1,440
/ 6,400 × 1,440
(horizontal)
(horizontal)
Lens
Lens
FUJINON fi xed focal length lens
FUJINON fi xed focal length lens
Focal length
Focal length
f=23 mm
f=23 mm
(35 mm format equivalent: 35 mm)
(35 mm format equivalent: 35 mm)
Maximum aperture
Maximum aperture
F2.0
F2.0
Aperture
Aperture
F2.0 F16 in steps of
F2.0 F16 in steps of
/
/
EV (9-blade diaphragm)
EV (9-blade diaphragm)
Focus range
Focus range
(distance from front of lens)
(distance from front of lens)
Approx. 50 cm
Approx. 50 cm
(2.6 ft.)
(2.6 ft.)
–∞
–∞
Macro (
Macro (
F
F
) mode
) mode
: Approx. 10 cm
: Approx. 10 cm
(3.9 in.)
(3.9 in.)
2.0 m
– 2.0 m
(6.6 ft.)
(6.6 ft.)
Sensitivity
Sensitivity
Standard output sensitivity equivalent to ISO 200 6400 in increments of
Standard output sensitivity equivalent to ISO 200 6400 in increments of
/
/
EV; AUTO (400), AUTO (800),
EV; AUTO (400), AUTO (800),
AUTO(1600), AUTO (3200), AUTO (6400); extended output sensitivity equivalent to ISO 100, 12800, or 25600
AUTO(1600), AUTO (3200), AUTO (6400); extended output sensitivity equivalent to ISO 100, 12800, or 25600
Metering
Metering
256-segment
256-segment
t
t
hrough-
hrough-
t
t
he-
he-
l
l
ens (TTL) metering; MULTI, SPOT, AVERAGE
ens (TTL) metering; MULTI, SPOT, AVERAGE
Exposure control
Exposure control
Programmed AE
Programmed AE
(with program shift)
(with program shift)
; shutter-priority AE; aperture-priority AE; manual exposure
; shutter-priority AE; aperture-priority AE; manual exposure
Exposure compensation
Exposure compensation
–2 EV +2 EV in increments of
–2 EV – +2 EV in increments of
/
/
EV
EV
121
Appendix
Speci cations
System
Shutter speed
Shutter speed
(mechanical shutter)
(mechanical shutter)
P
P
mode
mode
:
:
/
/
sec. to
sec. to
/
/


sec.
sec.
Bulb
Bulb
: Max. 60 min.
: Max. 60 min.
Time
Time
: 30 sec. to
: 30 sec. to
/
/
sec.
sec.
All other modes
All other modes
: 60 min. to
: 60 min. to
/
/


sec.
sec.
Continuous
Continuous
Choose from frame rates of 3.0 or 6.0 fps (JPEG); max. number of frames is respectively about 44 and 31
Choose from frame rates of 3.0 or 6.0 fps (JPEG); max. number of frames is respectively about 44 and 31
Focus
Focus
Mode
Mode
: Single or continuous AF; manual focus with focus ring
: Single or continuous AF; manual focus with focus ring
Focus-area selection
Focus-area selection
: Multi, area with focus area size selection and choice of 49 (7 × 7) frames (electronic view-
: Multi, area with focus area size selection and choice of 49 (7 × 7) frames (electronic view-
nder and LCD monitor) or 25 (5 × 5) frames (optical viewfi nder)
nder and LCD monitor) or 25 (5 × 5) frames (optical viewfi nder)
Autofocus system
Autofocus system
:
:
Intelligent hybrid AF (TTL contrast-detect/phase-detection AF) with AF-assist illuminator
Intelligent hybrid AF (TTL contrast-detect/phase-detection AF) with AF-assist illuminator
White balance
White balance
Custom, color temperature selection, auto, direct sunlight, shade, daylight uorescent, warm white uorescent,
Custom, color temperature selection, auto, direct sunlight, shade, daylight fl uorescent, warm white fl uorescent,
cool white fl uorescent, incandescent, underwater
cool white fl uorescent, incandescent, underwater
Self-timer
Self-timer
Off , 2 sec., 10 sec.
Off , 2 sec., 10 sec.
Flash
Flash
Type
Type
: Auto fl ash
: Auto fl ash
Guide number
Guide number
: Approx. 4.6/15 (ISO 100, m/ft.)
: Approx. 4.6/15 (ISO 100, m/ft.)
Mode
Mode
Auto, fi ll fl ash, off , slow sync, commander
Auto, fi ll fl ash, off , slow sync, commander
,
,
external fl ash
external fl ash
(red-eye removal o )
(red-eye removal o )
; auto with red-eye removal, fi ll fl ash with
; auto with red-eye removal, fi ll fl ash with
red-eye remova
red-eye remova
l, off , s
l, off , s
low sync with red-eye removal, commander
low sync with red-eye removal, commander
,
,
external fl ash
external fl ash
(red-eye removal on)
(red-eye removal on)
Hot shoe
Hot shoe
Accessory shoe with TTL contacts
Accessory shoe with TTL contacts
Hybrid view nder
Hybrid view nder
Optical view nder
Optical view nder
: Reverse Galilean viewfi nder with electronic bright frame display and approx. 0.5 × magnifi ca-
: Reverse Galilean viewfi nder with electronic bright frame display and approx. 0.5 × magnifi ca-
tions; frame coverage approx. 90%
tions; frame coverage approx. 90%
Electronic view nder
Electronic view nder
: 0.48-in., 2,360k-dot color LCD viewfi nder; diopter adjustment –2 +1 m
: 0.48-in., 2,360k-dot color LCD viewfi nder; diopter adjustment –2 +1 m
–1
–1
(dpt); eye point
(dpt); eye point
approx. 15 mm; frame coverage approx. 100%
approx. 15 mm; frame coverage approx. 100%
LCD monitor
LCD monitor
2.8-in/7.1 cm., 460k-dot color LCD monitor; frame coverage approx. 100%
2.8-in/7.1 cm., 460k-dot color LCD monitor; frame coverage approx. 100%
Movies
Movies
i
i
1920 × 1080
1920 × 1080
: 1080p; 60 fps/30 fps; stereo sound; maximum length 10 minutes
: 1080p; 60 fps/30 fps; stereo sound; maximum length 10 minutes
122
Speci cations
Input/output terminals
HDMI output
HDMI output
HDMI mini connector
HDMI mini connector
Digital input/output
Digital input/output
USB 2.0 High-Speed
USB 2.0 High-Speed
Power supply/other
Power supply
Power supply
NP-95 rechargeable battery
NP-95 rechargeable battery
Battery life
Battery life
(approximate
(approximate
number of frames that can
number of frames that can
be taken with a fully-charged
be taken with a fully-charged
battery)
battery)
Battery type
Battery type
Approximate number of frames
Approximate number of frames
NP-95
NP-95
(type supplied with camera)
(type supplied with camera)
330
330
CIPA standard, measured using battery supplied with camera and SD memory card.
CIPA standard, measured using battery supplied with camera and SD memory card.
Note
Note
: Number of shots that can be taken with battery varies with battery charge level and will decline at low
: Number of shots that can be taken with battery varies with battery charge level and will decline at low
temperatures.
temperatures.
Camera size
Camera size
(W × H × D)
(W × H × D)
126.5 mm × 74.4 mm × 53.9 (31.0
126.5 mm × 74.4 mm × 53.9 (31.0
*
*
) mm / 5.0 in. × 2.9 in. × 2.1 (1.2
) mm / 5.0 in. × 2.9 in. × 2.1 (1.2
*
*
) in.
) in.
* Excluding projecting parts, measured at the thinnest part
* Excluding projecting parts, measured at the thinnest part
Camera weight
Camera weight
Approx. 405 g / 14.3 oz., excluding battery, accessories, and memory card
Approx. 405 g / 14.3 oz., excluding battery, accessories, and memory card
Shooting weight
Shooting weight
Approx. 445 g / 15.7 oz., including battery and memory card
Approx. 445 g / 15.7 oz., including battery and memory card
Operating conditions
Operating conditions
Temperature
Temperature
: 0 °C to +40 °C / +32 °F to +104 °F
: 0 °C to +40 °C / +32 °F to +104 °F
Humidity
Humidity
: 10% 80%
: 10% – 80%
(no condensation)
(no condensation)
123
Appendix
Speci cations
NP-95 rechargeable battery
Nominal voltage
Nominal voltage
DC 3.6 V
DC 3.6 V
Nominal capacity
Nominal capacity
1,800 mAh
1,800 mAh
Operating temperature
Operating temperature
0 °C to +40 °C/+32 °F to +104 °F
0 °C to +40 °C/+32 °F to +104 °F
Dimensions
Dimensions
(W × H × D)
(W × H × D)
35.2 mm × 49.5 mm × 10.8 mm / 1.3 in. × 1.9 in. × 0.4 in.
35.2 mm × 49.5 mm × 10.8 mm / 1.3 in. × 1.9 in. × 0.4 in.
Weight
Weight
Approx. 39 g / 1.3 oz.
Approx. 39 g / 1.3 oz.
BC-65N battery charger
Rated input
Rated input
100 V 240 V AC, 50/60 Hz
100 V – 240 V AC, 50/60 Hz
Input capacity
Input capacity
15 VA
15 VA
Rated output
Rated output
4.2 V DC, 650 mA
4.2 V DC, 650 mA
Supported batteries
Supported batteries
NP-95 rechargeable batteries
NP-95 rechargeable batteries
Charging time
Charging time
Approx. 210 minutes (+20 °C/+68 °F)
Approx. 210 minutes (+20 °C/+68 °F)
Operating temperature
Operating temperature
0 °C to +40 °C/+32 °F to +104 °F
0 °C to +40 °C/+32 °F to +104 °F
Dimensions
Dimensions
(W × H × D)
(W × H × D)
65 mm × 25.3 mm × 80 mm/2.5 in. × 0.9 in. × 3.1 in., excluding projections
65 mm × 25.3 mm × 80 mm/2.5 in. × 0.9 in. × 3.1 in., excluding projections
Weight
Weight
Approx. 59 g/2.0 oz., excluding battery
Approx. 59 g/2.0 oz., excluding battery
Weight and dimensions vary with the country or region of sale. Labels, menus, and other displays may di er from those on the
actual camera.
124
Speci cations
Notices
Notices
• Speci cations subject to change without notice; for the latest information, visit http://www.fujifilm.com/products/
digital_cameras/index.html. FUJIFILM shall not be held liable for damages resulting from errors in this manual.
Although the view nder and LCD monitor are manufactured using advanced high-precision technology, small
bright points and anomalous colors may appear, particularly in the vicinity of text. This is normal for this type of
LCD display and does not indicate a malfunction; images recorded with the camera are una ected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric  elds, static electricity,
or line noise).
Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.
125
Appendix
Restrictions on Camera Settings
Restrictions on Camera Settings
The options available in each shooting mode are listed below.
Option
Option
P
P
S
S
A
A
M
M
n
n
r
r
F
F
F
F
(macro mode)
(macro mode)
OFF
OFF
1
1
1
1
F
F
DRIVE
DRIVE
I
I
(con-
(con-
tinuous)
tinuous)
6.0 fps
6.0 fps
3.0 fps
3.0 fps
Bracket-
Bracket-
ing
ing
O
O
W
W
X
X
Y
Y
Metering
Metering
o
o
2
2
2
2
p
p
q
q
Focus mode
Focus mode
AF-C
AF-C
AF-S
AF-S
MF
MF
Exposure compensation
Exposure compensation
5
5
WB WHITE BALANCE
WB WHITE BALANCE
B
B
SELF-TIMER
SELF-TIMER
Option
Option
P
P
S
S
A
A
M
M
n
n
r
r
F
F
N
N
ISO
ISO
H (25600)
H (25600)
H (12800)
H (12800)
6400
6400
5000
5000
4000
4000
3200
3200
2500
2500
2000
2000
1600
1600
1250
1250
1000
1000
800
800
640
640
500
500
400
400
320
320
250
250
200
200
L (100)
L (100)
AUTO (6400)
AUTO (6400)
AUTO (3200)
AUTO (3200)
AUTO (1600)
AUTO (1600)
AUTO (800)
AUTO (800)
AUTO (400)
AUTO (400)
126
Restrictions on Camera Settings
Option
Option
P
P
S
S
A
A
M
M
n
n
r
r
F
F
O
O
IMAGE SIZE
IMAGE SIZE
O
O
P
P
Q
Q
3
3
T
T
IMAGE
IMAGE
QUALITY
QUALITY
FINE
FINE
NORMAL
NORMAL
FINE+RAW
FINE+RAW
NORMAL+RAW
NORMAL+RAW
RAW
RAW
U
U
DYNAMIC
DYNAMIC
RANGE
RANGE
AUTO
AUTO
V
V
W
W
X
X
P
P
FILM
FILM
SIMULATION
SIMULATION
c
c
d
d
e
e
g
g
h
h
b
b
e
e
d
d
f
f
f
f
Option
Option
P
P
S
S
A
A
M
M
n
n
r
r
F
F
t
t
ND FILTER
ND FILTER
f
f
COLOR
COLOR
q
q
SHARPNESS
SHARPNESS
r
r
HIGHLIGHT TONE
HIGHLIGHT TONE
s
s
SHADOW TONE
SHADOW TONE
h
h
NOISE REDUCTION
NOISE REDUCTION
K
K
LONG EXPOSURE NR
LONG EXPOSURE NR
u
u
SELECT CUSTOM SETTING
SELECT CUSTOM SETTING
K
K
EDIT/SAVE CUSTOM SETTING
EDIT/SAVE CUSTOM SETTING
F
F
Fn BUTTON
Fn BUTTON
127
Appendix
Restrictions on Camera Settings
Option
Option
P
P
S
S
A
A
M
M
n
n
r
r
F
F
v
v
DISP. CUSTOM
DISP. CUSTOM
SETTING
SETTING
FRAMING
FRAMING
GUIDLINE
GUIDLINE
ELECTRONIC
ELECTRONIC
LEVEL
LEVEL
AF DISTANCE
AF DISTANCE
INDICATOR
INDICATOR
MF DISTANCE
MF DISTANCE
INDICATOR
INDICATOR
HISTOGRAM
HISTOGRAM
APERTURE/
APERTURE/
S-SPEED/ISO
S-SPEED/ISO
EXP.
EXP.
COMPENSATION
COMPENSATION
PHOTOMETRY
PHOTOMETRY
FLASH
FLASH
WHITE BALANCE
WHITE BALANCE
FILM SIMULATION
FILM SIMULATION
DYNAMIC RANGE
DYNAMIC RANGE
FRAMES
FRAMES
REMAINING
REMAINING
IMAGE SIZE/
IMAGE SIZE/
QUALITY
QUALITY
BATTERY LEVEL
BATTERY LEVEL
Option
Option
P
P
S
S
A
A
M
M
n
n
r
r
F
F
c
c
FRAMING GUIDLINE
FRAMING GUIDLINE
Y
Y
WIDE CONVERSION LENS
WIDE CONVERSION LENS
c
c
MF ASSIST
MF ASSIST
d
d
ADVANCED FILTER
ADVANCED FILTER
F
F
AF MODE
AF MODE
s
s
4
4
t
t
4
4
C
C
AF ILLUMINATOR
AF ILLUMINATOR
k
k
AE/AF-LOCK MODE
AE/AF-LOCK MODE
v
v
AE/AF-LOCK BUTTON
AE/AF-LOCK BUTTON
G
G
CORRECTED AF FRAME
CORRECTED AF FRAME
p
p
FLASH MODE
FLASH MODE
B
B
OFF
OFF
AUTO
AUTO
5
5
N
N
O
O
5
5
D
D
C
C
P
P
B
B
ON
ON
K
K
L
L
M
M
D
D
C
C
P
P
128
Restrictions on Camera Settings
Option
Option
P
P
S
S
A
A
M
M
n
n
r
r
F
F
I
I
FLASH
FLASH
B
B
RED EYE REMOVAL
RED EYE REMOVAL
n
n
SAVE ORG IMAGE
SAVE ORG IMAGE
I
I
FOCUS RING
FOCUS RING
j
j
FOCUS CHECK
FOCUS CHECK
Z
Z
POWER MANAGEMENT
POWER MANAGEMENT
J
J
COLOR SPACE
COLOR SPACE
1
1
Fixed at
Fixed at
OFF
OFF
.
.
2
2
Fixed at
Fixed at
o
o
(multi).
(multi).
3
3
Fixed at
Fixed at
Q
Q
.
.
4
4
Center focus area selected automatically.
Center focus area selected automatically.
5
5
Options available vary with shooting mode.
Options available vary with shooting mode.
129
Memo
Memo
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
99

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fujifilm Finepix X100S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fujifilm Finepix X100S in de taal/talen: Engels als bijlage per email.

De handleiding is 3,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Fujifilm Finepix X100S

Fujifilm Finepix X100S Gebruiksaanwijzing - Nederlands - 144 pagina's

Fujifilm Finepix X100S Gebruiksaanwijzing - Deutsch - 144 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info