Handleiding Fujifilm Finepix F455 (pagina 44 van 51) (Engels)

101533

Verklein

Vergroot

Pagina terug

1/51

Pagina verder

8786

Always use the AC Power Adapter AC-5VW with the

camera. The use of an AC Power adapter other than AC-

5VW can cause damage to your digital camera.

h Use the AC Power Adapter for indoor use only.

h Plug the connection cord plug securely into the DC input

terminal of the cradle.

h Turn off the FUJIFILM Digital camera before

disconnecting the cord from the cradle’s DC input

terminal. To disconnect, pull out the plug gently. Do not

pull on the cord.

h Do not use the AC power adapter with any device other

than your camera.

h During use, the AC power adapter will become hot to the

touch, but this is normal.

h Do not take apart the AC power adapter. Doing so could

be dangerous.

h Do not use the AC power adapter hot and humid place.

h Do not subject the AC power adapter to strong shocks.

h The AC power adapter may emit a humming. But this is

normal.

h If used near a radio, the AC power adapter may cause

static. If this happens, move the camera away from the

radio.

✽ Very occasionally, DC output will be prevented by the

operation of the internal protection circuit. In this event,

unplug the AC power adapter AC-5VW from the power

socket for a few moments and then plug it in again. This

will restore DC output.

■ Specifications (AC-5VW)

Power Supply AC 100V to 240V,50/60Hz

Rated Input Capacity 13W(U.S.A.and Canada)

0.08A to 0.2A(other countries)

Rated Output DC 5.0V 1.5A

Temperature During Use

0°C to +40°C (+32°F to +104°F)

Dimensions (MAX.) 40 mm × 21 mm × 79 mm

(1.6 in. × 0.8 in. × 3.1 in.)

(W × H × D)

Mass (Weight) Approx. 110 g (3.9 oz.)

(excluding power cord)

AC Power Adapter

WARNINGS

To reduce the risk of fire or electric shock, do not expose the AC power adapter to rain or moisture.

The AC power adapter should not be exposed to dripping or splashing and that no

objects filled with liquids, such as vases, should be placed on the AC power adapter.

IMPORTANT SAFETY INSTRUCTIONS

hRead these instructions.

hKeep these instructions.

hHeed all warnings.

hFollow all instructions.

hDo not use this apparatus near water.

hClean only with dry cloth.

hDo not block any ventilation openings,

Install in accordance with the

manufacturer’s instructions.

hDo not install near any heat sources

such as radiators, heat registers,

stoves, or other apparatus (including

amplifiers) that produce heat.

hProtect the power cord from being

walked on or pinched particularly at

plugs, convenience receptacles, and the

point where they exit from the apparatus.

hOnly use attachments/accessories

specified by the manufacturer.

Unplug this apparatus during lightning storms

or when unused for long periods of time.

hRefer all servicing to qualified service

personal.

Servicing is required when the apparatus

has been damaged in any way, such as

power-supply cord or plug is damaged,

liquid has been spilled or objects have

fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not

operate normally, or has been dropped.

Using Your Camera Correctly

e Read this information and the “Safety Notes” (➡P.96), to make sure you use your camera

correctly.

■ Places to Avoid

Do not store or use the camera in the following types of

locations:

h In the rain or in very humid, dirty or dusty places

h In direct sunlight or in places subject to extreme

temperature rises, such as in a closed car in summer

h Extremely cold places

h Places with strong vibration

h Places with smoke or steam

h Places subject to strong magnetic fields (such as near

motors, transformers or magnets)

h In contact with chemicals such as pesticides

h Next to rubber or vinyl products

■ Damaged by Water or sand

The FinePix F455 can be damaged on the inside and

outside by water and sand. When you are at the beach or

close to water, make sure that the camera is not damaged

by water or sand. Take care not to place the camera on a

wet surface.

■ Damaged by Condensation

If the camera is carried from a cold location into a warm

place, water droplets (condensation) may form on the

inside of the camera or on the lens. When this occurs, turn

the camera off and wait an hour before using the camera.

Condensation may also form on the xD-Picture card. In

this event, remove the xD-Picture card and wait a short

time.

■ When the Camera is Not Used or is

stored Periods of Time

If you do not intend to use the camera for a long period of

time, remove the battery and the xD-Picture card.

■ Cleaning Your Camera

Use a blower brush to brush away any dust on the lens,

LCD monitor, viewfinder and then gently wipe the camera

with a soft, dry cloth. If any soil remains, apply a small

amount of lens cleaning liquid to a piece of FUJIFILM lens

cleaning paper and wipe gently.

Do not scratch hard objects against the lens, LCD monitor

or viewfinder.

Clean the body of the camera with a soft, dry cloth. Do not

use volatile substances or cleaning products these items

can cause damage.

■ Using the Camera When Traveling

When traveling overseas, do not place your camera in the

check-in baggage. Baggage can be subjected violent

shocks, and the camera may be damaged inside or

outside.

Notes on the Power Supply

This camera uses the Rechargeable Lithium-ion Battery

NP-40. Note the points below when using the rechargeable

battery. Take particular care to read the Safety Notes to

make sure that you use the battery correctly.

✽ When shipped, the NP-40 is not fully charged. Always

charge the NP-40 before using it.

h When carrying the NP-40,

install it in a digital camera or

keep it in the soft case.

h When storing the NP-40,

place it inside the special soft

case provided.

■ Battery Features

h The NP-40 gradually loses its charge even when not

used. Use a NP-40 that has been charged recently (in

the last day or two) to take pictures.

h To maximize the life of the NP-40, turn the camera off as

quickly as possible when it is not being used.

h The number of available frames will be lower in cold

locations or at low temperatures. Take along a spare

fully charged NP-40.

You can also increase the amount of power produced by

putting the NP-40 in your pocket or another warm place

to heat it and then loading it into the camera just before

you take a picture.

If you are using a heating pad, take care not to place the

NP-40 directly against the pad. The camera may not

operate if you use a depleted NP-40 in cold conditions.

■ Charging the Battery

h You can charge the battery using the camera, cradle and

the AC power adapter (included).

i The NP-40 can be charged at ambient temperatures

between 0°C and +40°C (+32°F and +104°F). At an

ambient temperature of +23°C (+73°F), it takes

approximately 2 hours to charge a fully depleted

NP-40 battery.

i You should charge the NP-40 at an ambient

temperature between +10°C and +35°C (+50°F and

+95°F). If you charge the NP-40 at a temperature

outside this range, charging takes longer because the

performance of the NP-40 is impaired.

i You cannot charge the NP-40 at temperatures of 0°C

(+32°F) or below.

h You can also use the optional Battery Charger BC-65 to

charge the NP-40. When charging, use the NP-40

battery adapter supplied with the BC-65. Refer to the

Owner’s Manual for details.

i The NP-40 can be charged using the BC-65 Battery

Charger at ambient temperatures between 0°C and

+40°C (+32°F and +104°F). At an ambient temperature

of +23°C (+73°F), it takes approximately 90 minutes to

charge a fully depleted NP-40 battery.

i You should charge the NP-40 at an ambient

temperature between +10°C and +35°C (+50°F and

+95°F). If you charge the NP-40 at a temperature

outside this range, charging takes longer because the

performance of the NP-40 is impaired.

h The NP-40 does not need to be fully discharged or

exhausted flat before being charged.

h The NP-40 may feel warm after it has been charged or

immediately after being used. This is normal.

h Do not recharge a fully charged NP-40.

■ Battery Life

At normal temperatures, the NP-40 can be used at least

300 times.

If the time for which the NP-40 provides power shortens

markedly, this indicates that the NP-40 has reached the

end of its effective life and should be replaced.

The Rechargeable Lithium-ion Battery NP-40 is both compact

and capable of storing large quantities of power. However, if it

is stored for long periods while charged, the performance of

the battery can be impaired.

h If the battery will not be used for some time, run the

battery out before storing it.

h If you do not intend to use the camera for a long period

of time, remove the batteries from the camera or the

battery charger.

h Place the battery pack inside the soft case and store in a

cool place.

✽ The battery should be stored in a dry location with an

ambient temperature between +15°C and +25°C (+59°F

and +77°F).

✽ Do not leave the battery in hot or extremely cold places.

Notes on the Battery

(

NP-40

)

Soft case

Battery

(NP-40)

Notes on storage

■ Handling the Battery

To avoid injury or damage, observe the following:

h Do not carry or store battery with metal objects such as

necklaces or hairpins.

h Do not heat the battery or throw it into a fire.

h Do not attempt to take apart or change the battery.

h Do not recharge the battery with chargers other those

specified.

h Dispose of used battery promptly.

To avoid damaging the battery or shortening its

life, observe the following:

h Do not drop the battery or otherwise subject it to strong

impacts.

h Do not expose the battery to water.

To make sure that you obtain optimum battery

performance, observe the following:

h Always keep the battery terminals clean.

h Do not store battery in warm or humid places. Storing the

battery for long periods in a hot location can shorten the

battery life.

If you use the battery for a long period, the camera

body and the battery itself will become warm. This is

normal. Use the AC power adapter supplied with the

camera if you are taking pictures or viewing images for

a long period of time.

■ Specifications of the included NP-40

Nominal voltage DC 3.7V

Nominal capacity 710 mAh

Operating temperature 0°C to +40°C (+32°F to +104°F)

Dimensions 35.3 mm × 40 mm × 6 mm

(1.39 in. × 1.6 in. × 0.24 in.)

(W × H × D)

Mass (Weight) Approx. 20g (0.7 oz.)

Fujifilm Finepix F455 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info