66
h When the camera and PC are exchanging data,
the self-timer lamp blinks and the viewfinder lamp
blinks alternately green and orange.
h “≥” appears on the LCD monitor.
h Power save and Auto power off are disabled
during USB connection.
●
!
Before replacing the xD-Picture Card, always disconnect the
camera from the PC using the procedure on P.68.
●
!
Do not disconnect the USB cable when the camera is
communicating with the PC. See P.68 for information on the
disconnection procedure.
1Insert an xD-Picture Card into your camera.
Plug the AC power adapter connector into the
“DC IN 3V” socket on the camera and then plug
the adapter itself into the main power outlet.
2Slide the Power switch to the side to turn the
camera on.
3Set the “USB MODE” setting in the “SET-UP”
menu to “¶” (➡P.48).
4Slide the Power switch to the side to turn the
camera off.
1Turn your PC on.
2Use the USB cable (included) to connect the
camera to your computer.
3Turn the camera on.
USE AT DSC MODE
1
Set a camera
2
Connect a camera to a PC
●
!
Take care to ensure that the USB cable (included) is
connected the correct way around and that the plugs are
pushed fully into the connection sockets.
6.3 CONNECTING TO A COMPUTER
