Handleiding Fuji Finepix XP 30 series (pagina 122 van 134) (Engels)

FINEPIX XP30 Series

DIGITAL CAMERA

Owner’s Manual

Thank you for your purchase

of this product. This manual

describes how to use your

FUJIFILM digital camera and the

supplied software. Be sure that

you have read and understood

its contents and the warnings in

“For Your Safety” (P ii) before us-

ing the camera.

For information on related products, visit our website at

http://www.fujifilm.com/products/digital_cameras/index.html

EN

Before You Begin

First Steps

Basic Photography and Playback

More on Photography

More on Playback

Movies

Connections

Menus

Technical Notes

Troubleshooting

Appendix

BL01257-202

ii

For Your Safety

• Read Instructions: All the safety and operat-

ing instructions should be read before the

appliance is operated.

• Retain Instructions: The safety and operating

instructions should be retained for future

reference.

• Heed Warnings: All warnings on the ap-

pliance and in the operating instructions

should be adhered to.

• Follow Instructions: All operating and use

instructions should be followed.

Installation

Power Sources: This video product should be

operated only from the type of power source

indicated on the marking label. If you are

not sure of the type of power supply to your

home, consult your appliance dealer or local

power company. For video products intend-

ed to operate from battery power, or other

sources, refer to the operating instructions.

Grounding or Polarization: This video product

is equipped with a polarized alternating-

current line plug (a plug having one blade

wider than the other). This plug will ﬁ t into

the power outlet only one way. This is a safety

feature. If you are unable to insert the plug

fully into the outlet, try reversing the plug. If

the plug should still fail to ﬁ t, contact your

electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the po-

larized plug.

Alternate Warnings: This video product is

equipped with a three-wire grounding-type

plug, a plug having a third (grounding) pin.

This plug will only ﬁ t into a grounding-type

power outlet. This is a safety feature. If you

are unable to insert the plug into the outlet,

contact your electrician to replace your obso-

lete outlet. Do not defeat the safety purpose

of the grounding type plug.

Overloading: Do not overload wall outlets and

extension cords as this can result in a risk of

ﬁ re or electric shock.

Ventilation: Slots and openings in the cabinet

are provided for ventilation, to ensure reliable

operation of the video product and to pro-

tect it from overheating, and these openings

must not be blocked or covered. The open-

ings should never be blocked by placing the

video product on a bed, sofa, rug, or other

similar surface.

This video product should not be placed in a

built-in installation such as a bookcase or rack

unless proper ventilation is provided or the

manufacturer’s instructions have been ad-

hered to. This video product should never be

placed near or over a radiator or heat register.

Attachments: Do not use attachments not

recommended by the video product manu-

facturer as they may cause hazards.

Water and Moisture:

Do not use this video

product near water—for example, near a bath

tub, wash bowl, kitchen sink, or laundry tub,

in a wet basement, or near a swimming pool,

and the like (excluding waterproof products).

Power-Cord Protection: Power-supply cords

should be routed so that they are not likely

to be walked on or pinched by items placed

upon or against them, paying particular

attention to cords at plugs, convenience re-

ceptacles, and the point where they exit from

the appliance.

Accessories: Do not place this video product

on an unstable cart, stand, tripod, bracket, or

table. The video product may fall, causing

serious injury to a child or adult, and serious

damage to the appliance. Use only with a

cart, stand, tripod, bracket, or table recom-

mended by the manufacturer, or sold with

the video product. Any mounting of the ap-

pliance should follow the manufacturer’s in-

structions, and should use a mounting acces-

sory recommended by the manufacturer.

An appliance and cart

combination should

be moved with care.

Quick stops, exces-

sive force, and uneven

surfaces may cause

the appliance and cart

combination to overturn.

IMPORTANT SAFETY INSTRUCTIONS

iii

For Your Safety

Antennas

Outdoor Antenna Grounding: If an outside

antenna or cable system is connected to the

video product, be sure the antenna or cable

system is grounded so as to provide some

protection against voltage surges and built-

up static charges. Section 810 of the National

Electrical Code, ANSI/NFPA No. 70, provides

information with respect to proper ground-

ing of the mast and supporting structure,

grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors,

location of antenna discharge unit, connec-

tion to grounding electrodes, and require-

ments for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

Antenna Lead

in Wire

Ground Clamp

Grounding

Conductors

(NEC SECTION

810-21)

Power Service Grounding

Electrode System (NEC ART

250. PART H)

Antenna

Discharge Unit

(NEC SECTION

810-20)

Electric Service

Equipment

Ground Clamps

Power Lines: An outside antenna system

should not be located in the vicinity of over-

head power lines or other electric light or

power circuits, or where it can fall into such

power lines or circuits. When installing an

outside antenna system, extreme care should

be taken to keep from touching such power

lines or circuits as contact with them might

be fatal.

Use

Cleaning: Unplug this video product from the

wall outlet before cleaning. Do not use liq-

uid cleaners or aerosol cleaners. Use a damp

cloth for cleaning.

Object and Liquid Entry: Never push objects

of any kind into this video product through

openings as they may touch dangerous volt-

age points or short out parts that could result

in a ﬁ re or electric shock. Never spill liquid

of any kind on the video product (excluding

waterproof products).

Lightning:

For added protection for this video

product receiver during a lightning storm, or

when it is left unattended and unused for long

periods of time, unplug it from the wall outlet

and disconnect the antenna or cable system.

This will prevent damage to the video product

due to lightning and power-line surges.

Service

Servicing: Do not attempt to service this video

product yourself as opening or removing cov-

ers may expose you to dangerous voltage or

other hazards. Refer all servicing to qualiﬁ ed

service personnel.

Damage Requiring Service: Unplug this video

product from the wall outlet and refer servic-

ing to qualiﬁ ed service personnel under the

following conditions:

• When the power-supply cord or plug is

damaged.

• If liquid has been spilled, or objects have

fallen into the video product.

• If the video product has been exposed to

rain or water (excluding waterproof prod-

ucts).

• If the video product has been dropped or

the cabinet has been damaged.

If the video product does not operate nor-

mally follow the operating instructions. Ad-

just only those controls that are covered by

the operating instructions as an improper

adjustment of other controls may result in

damage and will often require extensive work

by a qualiﬁ ed technician to restore the video

product to its normal operation.

When the video product exhibits a distinct

change in performance—this indicates a

need for service.

Replacement Parts: When replacement parts

are required, be sure the service technician

has used replacement parts speciﬁ ed by the

manufacturer or have the same characteris-

tics as the original part. Unauthorized sub-

stitutions may result in ﬁ re, electric shock or

other hazards.

Safety Check: Upon completion of any service

or repairs to this video product, ask the ser-

vice technician to perform safety checks to

determine that the video product is in proper

operating condition.

iv

For Your Safety

Be sure to read these notes before use

Safety Notes

• Make sure that you use your camera correctly. Read these safety

notes and your Owner’s Manual carefully before use.

• After reading these safety notes, store them in a safe place.

About the Icons

The icons shown below are used in this document to indicate the

severity of the injury or damage that can result if the information

indicated by the icon is ignored and the product is used incorrectly

as a result.

WARNING

This icon indicates that death or serious injury can result if the

information is ignored.

CAUTION

This icon indicates that personal injury or material damage can

result if the information is ignored.

The icons shown below are used to indicate the nature of the instruc-

tions which are to be observed.

Triangular icons tell you that this information requires atten-

tion (“Important”).

Circular icons with a diagonal bar tell you that the action indi-

cated is prohibited (“Prohibited”).

Filled circles with an exclamation mark indicate an action that

must be performed (“Required”).

WARNING

Unplug from

power socket

If a problem arises, turn the camera o , remove the battery, and

disconnect and unplug the AC power adapter. Continued use of

the camera when it is emitting smoke, is emitting any unusual

odor, or is in any other abnormal state can cause a ﬁ re or elec-

tric shock. Contact your FUJIFILM dealer.

Do not allow water or foreign objects to enter the camera. If water

or foreign objects get inside the camera, turn the camera oﬀ ,

remove the battery, and disconnect and unplug the AC power

adapter. Continued use of the camera can cause a ﬁ re or elec-

tric shock. Contact your FUJIFILM dealer.

WARNING

Do not use in

the bathroom or

shower

Do not use the camera in the bathroom or shower (excluding water-

proof products). This can cause a ﬁ re or electric shock.

Do not

disassemble

Never attempt to change or take apart the camera (never open

the case). Failure to observe this precaution can cause ﬁ re or

electric shock.

Do not touch

internal parts

Should the case break open as the result of a fall or other accident,

do not touch the exposed parts. Failure to observe this precau-

tion could result in electric shock or in injury from touching the

damaged parts. Remove the battery immediately, taking care

to avoid injury or electric shock, and take the product to the

point of purchase for consultation.

Do not change, heat or unduly twist or pull the connection cord and

do not place heavy objects on the connection cord. These actions

could damage the cord and cause a ﬁ re or electric shock. If the

cord is damaged, contact your FUJIFILM dealer.

Do not place the camera on an unstable surface. This can cause the

camera to fall or tip over and cause injury.

Never attempt to take pictures while in motion. Do not use the

camera while you are walking or driving a vehicle. This can re-

sult in you falling down or being involved in a traﬃ c accident.

Do not touch any metal parts of the camera during a thunderstorm.

This can cause an electric shock due to induced current from

the lightning discharge.

Do not use the battery except as speci ed. Load the battery as

shown by the indicator.

Do not heat, change or take apart the battery. Do not drop or subject

the battery to impacts. Do not store the battery with metallic prod-

ucts. Any of these actions can cause the battery to burst or leak

and cause ﬁ re or injury as a result.

Use only the battery or AC power adapters speci ed for use with this

camera. Do not use voltages other than the power supply voltage

shown. The use of other power sources can cause a ﬁ re.

If the battery leaks and  uid gets in contact with your eyes, skin or

clothing,  ush the a ected area with clean water and seek medical

attention or call an emergency number right away.

v

For Your Safety

WARNING

Do not use the charger to charge batteries other than those speci-

 ed here. The supplied battery charger is for use only with the

type of battery supplied with the camera. Using the charger to

charge conventional batteries or other types of rechargeable

batteries can cause the battery to leak ﬂ uid, overheat or burst.

When carrying the battery, install it in a digital camera or keep it

in the hard case. When storing the battery, keep it in the hard case.

When discarding, cover the battery terminals with insulation tape.

Contact with other metallic objects or batteries could cause

the battery to ignite or burst.

Keep memory cards out of the reach of small children. Because

memory cards are small, they can be swallowed by children.

Be sure to store memory cards out of the reach of small chil-

dren. If a child swallows a memory card, seek medical atten-

tion or call an emergency number.

CAUTION

Do not use this camera in locations a ected by oil fumes or steams.

This can cause a ﬁ re or electric shock.

Do not use this camera in locations a ected by humidity or dust

(excluding waterproof products). This can cause a ﬁ re or elec-

tric shock.

Do not leave this camera in places subject to extremely high temper-

atures. Do not leave the camera in locations such as a sealed

vehicle or in direct sunlight. This can cause a ﬁ re.

Keep out of the reach of small children. This product could cause

injury in the hands of a child.

Do not place heavy objects on the camera. This can cause the

heavy object to tip over or fall and cause injury.

Do not move the camera while the AC power adapter is still connect-

ed. Do not pull on the connection cord to disconnect the AC power

adapter. This can damage the power cord or cables and cause

a ﬁ re or electric shock.

Do not use the AC power adapter when the plug is damaged or the

plug socket connection is loose. This could cause a ﬁ re or electric

shock.

CAUTION

Do not cover or wrap the camera or the AC power adapter in a cloth

or blanket. This can cause heat to build up and distort the cas-

ing or cause a ﬁ re.

When you are cleaning the camera or you do not plan to use the

camera for an extended period, remove the battery and disconnect

and unplug the AC power adapter. Failure to do so can cause a

ﬁ re or electric shock.

Unplug from

power socket

When charging ends, unplug the charger from the power socket.

Leaving the charger plugged into the power socket can cause

a ﬁ re.

Using a  ash too close to a person’s eyes may temporarily a ect the

eyesight. Take particular care when photographing infants and

young children.

When a memory card is removed, the card could come out of the slot

too quickly. Use your  nger to hold it and gently release the card.

Injury could result to those struck by the ejected card.

Request regular internal testing and cleaning for your camera.

Build-up of dust in your camera can cause a ﬁ re or electric

shock. Contact your FUJIFILM dealer to request internal clean-

ing every two years. Please note that this service is not free

of charge.

vi

For Your Safety

The Battery and Power Supply

Note: Check the type of battery used in

your camera and read the appropriate

sections.

The following describes the proper use of

batteries and how to prolong their life. Incor-

rect use can shorten battery life or cause leak-

age, overheating, ﬁ re, or explosion.

Li-ion Batteries

Read this section if your camera uses a

rechargeable Li-ion battery.

The battery is not charged at shipment.

Charge the battery before use. Keep the bat-

tery in its case when not in use.

■ Notes on the Battery

The battery gradually loses its charge when

not in use. Charge the battery one or two

days before use.

Battery life can be extended by turning the

camera oﬀ when not in use.

Battery capacity decreases at low tempera-

tures; a depleted battery may not function at

when cold. Keep a fully charged spare bat-

tery in a warm place and exchange as nec-

essary, or keep the battery in your pocket or

other warm place and insert it in the camera

only when shooting. Do not place the bat-

tery in direct contact with hand warmers or

other heating devices.

■ Charging the Battery

Charge the battery in the supplied battery

charger. Charging times will increase at am-

bient temperatures below +10 °C (+50 °F) or

above +35 °C (+95 °F). Do not attempt to

charge the battery at temperatures above

40 °C (+104 °F); at temperatures below 0 °C

(+32 °F), the battery will not charge.

Do not attempt to recharge a fully charged

battery. The battery does not however need

to be fully discharged before charging.

The battery may be warm to the touch imme-

diately after charging or use. This is normal.

■ Battery Life

At normal temperatures, the battery can be

recharged about 300 times. A noticeable de-

crease in the length of time the battery will

hold a charge indicates that it has reached

the end of its service life and should be re-

placed.

■ Storage

Performance may be impaired if the battery is

left unused for extended periods when fully

charged. Run the battery ﬂ at before storing it.

If the camera will not be used for an extended

period, remove the battery and store it in a

dry place with an ambient temperature of

from +15 °C to +25 °C (+59 °F to +77 °F). Do

not store in locations exposed to extremes of

temperature.

■ Cautions: Handling the Battery

• Do not transport or store with metal objects

such as necklaces or hairpins.

• Do not expose to ﬂ ame or heat.

• Do not disassemble or modify.

• Use with designated chargers only.

• Do not drop or subject to strong physical

shocks.

• Do not expose to water.

• Keep the terminals clean.

• The battery and camera body may become

warm to the touch after extended use. This

is normal.

AA Alkaline/Rechargeable NiMH Batteries

Read this section if your camera uses AA

alkaline or rechargeable AA NiMH bat-

teries. Information on compatible battery

types may be found elsewhere in the camera

manual.

■ Cautions: Handling the Batteries

• Do not expose to water, ﬂ ame, or heat, or

store in warm or humid conditions.

• Do not transport or store with metal objects

such as necklaces or hairpins.

• Do not disassemble or modify the batteries

or battery casing.

• Do not subject to strong physical shocks.

• Do not use batteries that are leaking, de-

formed, or discolored.

• Keep out of reach of infants and small chil-

dren.

• Insert in the correct orientation.

vii

For Your Safety

• Do not mix old and new batteries, batteries

with diﬀ erent charge levels, or batteries of

diﬀ erent types.

• If the camera will not be used for an extend-

ed period, remove the batteries. Note that

the camera clock will be reset.

• The batteries may be warm to the touch

immediately after use. Turn the camera

oﬀ and allow the batteries to cool before

handling.

• Battery capacity tends to decrease at low

temperatures. Keep spare batteries in a

pocket or other warm place and exchange

as necessary. Cold batteries may recover

some of their charge when warmed.

• Fingerprints and other stains on the battery

terminals can impair battery performance.

Thoroughly clean the terminals with a

soft, dry cloth before inserting them in the

camera.

If the batteries leak, clean the battery

compartment thoroughly before in-

serting new batteries.

If ﬂ uid from the battery comes into

contact with skin or clothing, ﬂ ush

the aﬀ ected area with water. If  uid

enters your eyes, immediately  ush the

a ected area with water and seek

medical attention. Do not rub your eyes.

Failure to observe this precaution could

result in permanent visual impairment.

■ NiMH Batteries

The capacity of Ni-MH batteries may be

temporarily reduced when new, after long

periods of disuse, or if they are repeatedly

recharged before being fully discharged. This

is normal and does not indicate a malfunc-

tion. Capacity can be increased by repeatedly

discharging the batteries using the discharge

option in the camera setup menu and re-

charging them using a battery charger.

Q CAUTION: Do not use the discharge option

with alkaline batteries.

The camera draws a small amount of current

even when oﬀ . Ni-MH batteries that have

been left in the camera for an extended pe-

riod may be drawn down to the point that

they no longer hold a charge. Battery perfor-

mance may also drop if the batteries are run

down in a device such as a ﬂ ashlight. Use the

discharge option in the camera setup menu

to discharge Ni-MH batteries. Batteries that

no longer hold a charge even after repeat-

edly being discharged and recharged have

reached the end of their service life and must

be replaced.

Ni-MH batteries can be recharged in a bat-

tery charger (sold separately). Batteries may

become warm to the touch after charging.

Refer to the instructions provided with the

charger for more information. Use the char-

ger with compatible batteries only.

Ni-MH batteries gradually lose their charge

when not in use.

■ Disposal

Dispose of used batteries in accord with local

regulations.

AC Power Adapters (Available Separately)

This section applies to all camera models.

Use only FUJIFILM AC power adapters desig-

nated for use with this camera. Other adapt-

ers could damage the camera.

• The AC power adapter is for indoor use only.

• Be sure the DC plug is securely connected

to the camera.

• Turn the camera oﬀ before disconnecting

the adapter. Disconnect the adapter by the

plug, not the cable.

• Do not use with other devices.

• Do not disassemble.

• Do not expose to high heat and humidity.

• Do not subject to strong physical shocks.

• The adapter may hum or become hot to the

touch during use. This is normal.

• If the adapter causes radio interference,

reorient or relocate the receiving antenna.

viii

For Your Safety

Using the Camera

Do not aim the camera at extremely bright

light sources, such as the sun in a cloudless

sky. Failure to observe this precaution could

damage the camera image sensor.

Take Test Shots

Before taking photographs on important

occasions (such as at weddings or before

taking the camera on a trip), take a test shot

and view the result in the LCD monitor to en-

sure that the camera is functioning normally.

FUJIFILM Corporation can not accept liability

for damages or lost proﬁ ts incurred as a result

of product malfunction.

Notes on Copyright

Unless intended solely for personal use, imag-

es recorded using your digital camera system

cannot be used in ways that infringe copy-

right laws without the consent of the owner.

Note that some restrictions apply to the

photographing of stage performances, enter-

tainments, and exhibits, even when intended

purely for personal use. Users are also asked

to note that the transfer of memory cards

containing images or data protected under

copyright laws is only permissible within the

restrictions imposed by those copyright laws.

Handling

To ensure that images are recorded correctly,

do not subject the camera to impact or physi-

cal shocks while images are being recorded.

Liquid Crystal

In the event that the LCD monitor is dam-

aged, care should be taken to avoid contact

with liquid crystal. Take the urgent action

indicated should any of the following situa-

tions arise:

• If liquid crystal comes in contact with your skin,

clean the area with a cloth and then wash

thoroughly with soap and running water.

• If liquid crystal enters your eyes, ﬂ ush the af-

fected eye with clean water for at least 15

minutes and then seek medical assistance.

• If liquid crystal is swallowed, rinse your

mouth thoroughly with water. Drink large

quantities of water and induce vomiting,

then seek medical assistance.

Although the display is manufactured using

extremely high-precision technology, it may

contain pixels that are always lit or that do not

light. This is not a malfunction, and images re-

corded with the product are unaﬀ ected.

Trademark Information

xD-Picture Card and E are trademarks

of FUJIFILM Corporation. The typefaces in-

cluded herein are solely developed by Dyna-

Comware Taiwan Inc. Macintosh, QuickTime,

and Mac OS are trademarks of Apple Inc. in

the U.S.A. and other countries. Windows7,

Windows Vista, and the Windows logo are

trademarks of the Microsoft group of com-

panies. Adobe and Adobe Reader are either

trademarks or registered trademarks of Ado-

be Systems Incorporated in the U.S.A. and/

or other countries. The SDHC and SDXC logos

are trademarks of SD-3C, LLC. The HDMI logo

is a trademark. YouTube is a trademark of

Google Inc. All other trade names mentioned

in this manual are the trademarks or regis-

tered trademarks of their respective owners.

Electrical Interference

This camera may interfere with hospital or

aviation equipment. Consult with hospital

or airline staﬀ before using the camera in a

hospital or on an aircraft.

Color Television Systems

NTSC (National Television System Committee)

is a color television telecasting speciﬁ cation

adopted mainly in the U.S.A., Canada, and

Japan. PAL (Phases Alternation by Line) is

a color television system adopted mainly in

European countries and China.

Exif Print (Exif Version 2.3)

Exif Print is a newly revised digital camera ﬁ le

format in which information stored with pho-

tographs is used for optimal color reproduc-

tion during printing.

IMPORTANT NOTICE:

Read Before Using the Software

Direct or indirect export, in whole or in part,

of licensed software without the permission

of the applicable governing bodies is pro-

hibited.

ix

For Your Safety

IMPORTANT: Read this section before using the toponyms includ-

ed in this product.

Toponym Data License Agreement

Personal Use Only. You agree to use this Data together with this digital

camera for the solely personal, non-commercial purposes for which

you were licensed, and not for service bureau, time-sharing or other

similar purposes. Accordingly, but subject to the restrictions set forth

in the following paragraphs, you may copy this Data only as necessary

for your personal use to (i) view it, and (ii) save it, provided that you do

not remove any copyright notices that appear and do not modify the

Data in any way. You agree not to otherwise reproduce, copy, modify,

decompile, disassemble or reverse engineer any portion of this Data,

and may not transfer or distribute it in any form, for any purpose, ex-

cept to the extent permitted by mandatory laws. Multi-disc sets may

only be transferred or sold as a complete set as provided by FUJIFILM

Corporation and not as a subset thereof.

Restrictions. Except where you have been speciﬁ cally licensed to do

so by FUJIFILM Corporation, and without limiting the preceding para-

graph, you may not (a) use this Data with any products, systems, or

applications installed or otherwise connected to or in communication

with vehicles, capable of vehicle navigation, positioning, dispatch, real

time route guidance, ﬂ eet management or similar applications; or (b)

with or in communication with any positioning devices or any mo-

bile or wireless-connected electronic or computer devices, including

without limitation cellular phones, palmtop and handheld computers,

pagers, and personal digital assistants or PDAs.

Warning. The Data may contain inaccurate or incomplete information

due to the passage of time, changing circumstances, sources used

and the nature of collecting comprehensive geographic data, any of

which may lead to incorrect results.

No Warranty. This Data is provided to you “as is,” and you agree to use

it at your own risk. FUJIFILM Corporation and its licensors (and their

licensors and suppliers) make no guarantees, representations or war-

ranties of any kind, express or implied, arising by law or otherwise,

including but not limited to, content, quality, accuracy, completeness,

eﬀ ectiveness, reliability, ﬁ tness for a particular purpose, usefulness,

use or results to be obtained from this Data, or that the Data or server

will be uninterrupted or error-free.

Disclaimer of Warranty: FUJIFILM Corporation AND ITS LICENSORS

(INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY

WARRANTIES, EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE,

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-

INFRINGEMENT. Some States, Territories and Countries do not allow

certain warranty exclusions, so to that extent the above exclusion may

not apply to you.

Disclaimer of Liability: FUJIFILM Corporation AND ITS LICENSORS (IN-

CLUDING THEIR LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO

YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE

OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION

ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT,

WHICH MAY RESULT FROM THE USE OR POSSESSION OF THE INFOR-

MATION; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR

SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL

OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR

INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE INFORMA-

TION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER

IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY,

EVEN IF FUJIFILM Corporation OR ITS LICENSORS HAVE BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES. Some States, Territories and

Countries do not allow certain liability exclusions or damages limita-

tions, so to that extent the above may not apply to you.

Export Control. You agree not to export from anywhere any part of the

Data provided to you or any direct product thereof except in compli-

ance with, and with all licenses and approvals required under, appli-

cable export laws, rules and regulations.

Entire Agreement. These terms and conditions constitute the entire

agreement between FUJIFILM Corporation (and its licensors, includ-

ing their licensors and suppliers) and you pertaining to the subject

matter hereof, and supersedes in their entirety any and all written or

oral agreements previously existing between us with respect to such

subject matter.

x

For Your Safety

Governing Law. The above terms and conditions shall be governed by

the laws of the State of Illinois, Netherlands, without giving eﬀ ect to

(i)its conﬂ ict of laws provisions, or (ii)the United Nations Convention

for Contracts for the International Sale of Goods, which is explicitly ex-

cluded. You agree to submit to the jurisdiction of the State of Illinois,

The Netherlands for any and all disputes, claims and actions arising

from or in connection with the Data provided to you hereunder.

Geodetics. The geodetic system used by this device to record latitude

and longitude is WGS 84.

Copyright. The map data included in this device are protected under

copyright law and except for personal use may not be employed

without the permission of the copyright holder.

Navigation. This device can not be used for purposes of navigation.

Licensed Software Copyright Holders

This service uses POI (Points Of Inter-

est) of ZENRIN CO., LTD. “POWERED BY

ZENRIN” is a trademark of ZENRIN CO.,

reserved.

Ontario, © Canada Post Corporation, GeoBase®, © Department of

Natural Resources Canada, ZIP+4®, © United States Postal Service®

2010. the USPS®.

Australia Copyright. Based on data provided under

license from PSMA Australia Limited

(www.psma.com.au).

Austria “© Bundesamt für Eich- und Vermes-

sungswesen”

Croatia, Cyprus,

Estonia, Latvia,

Lithuania, Moldova,

Poland, Slovenia and/

or Ukraine

“© EuroGeographics”

France The following notice must appear on all

copies of the Data, and may also appear

on packaging: “source: © IGN France – BD

TOPO®”

Germany “Die Grundlagendaten wurden mit

Genehmigung der zuständigen Behörden

entnommen” or “Die Grundlagendaten

wurden mit Genehmigung der zustaendi-

gen Behoerden entnommen.”

Great Britain “Based upon Crown Copyright material.”

Greece “Copyright Geomatics Ltd.”

Italy “La Banca Dati Italiana è stata prodotta

usando quale riferimento anche cartograﬁ a

numerica ed al tratto prodotta e fornita

dalla Regione Toscana.”

Authority”

Portugal “Source: IgeoE – Portugal”

Spain “Información geográﬁ ca propiedad del

CNIG”

Sweden “Based upon electronic data Ó National

Land Survey Sweden.”

Switzerland “Topograﬁ sche Grundlage: Ó Bundesamt für

Landestopographie.”

xi

About This Manual

Before using the camera, read this manual and the warnings in “For Your Safe-

ty” (P ii). For information on speci c topics, consult the sources below.

Table of Contents

............................

P

xv

Troubleshooting

............................

P

93

The “Table of Contents” gives an

overview of the entire manual. The

principal camera operations are list-

ed here.

Having a speci c problem with the

camera? Find the answer here.

Warning Messages and Displays

.....

P

99

Find out what’s behind that  ashing

icon or error message in the display.

Memory Cards

Pictures can be stored in the camera’s internal memory or on optional SD, SDHC, and

SDXC memory cards (P 14), referred to in this manual as “memory cards.”

xii

Frequently-Used Buttons

■

Deleting Pictures

y To delete a picture, display it full frame

and press the selector up (b).

■

Taking Pictures During Playback

y To return instantly to shooting mode,

press the shutter button halfway.

View

Shoot

■

Silent Mode

y Press and hold the DISP/

BACK button to disable

camera lights and

sounds.

■

Turning the Camera on in

Playback Mode

y When the camera is

o , playback can be

started by pressing the

a button for about a

second.

xiii

Product Features and Precautions for Use

■

Water, Dust, and Shock Resistance

Q

The camera complies with JIS Class 8 water resistance and JIS Class 6 (IP68) dust resistance

standards, and has passed FUJIFILM drop tests (drop height: 1.5m/4.9ft.; impact surface: ply-

wood, thickness 5cm/2.0in.) compliant with MIL-STD 810F Method 516.5: Shock. These results

were obtained through in-house testing and are not a blanket guarantee of water resistance

or invulnerability to damage or destruction. The accessories supplied with the camera are not

water resistant.

■

Before Use

Q

The front surface of the camera lens is protected by a sheet of glass. Foreign matter on the

glass will appear in photographs; keep the glass clean at all times.

Q

Be sure that the battery-chamber and connector covers are fully latched. The presence of wa-

ter, mud, or sand in the camera could cause malfunction.

Q

Do not open or close the battery-chamber or connector cover with wet hands or near water,

for example while on or by a body of water.

Q

Be sure the camera is completely dry before inserting or removing batteries or memory cards

or connecting the USB or A/V cable.

Q

The camera does not  oat. Be sure to attach the strap and keep it around your wrist when

using the camera.

■

During Use

Q

Restrict underwater use to depths of 5 m (16ft.) or less and periods shorter than 120 minutes.

Q

Do not open or close the battery-chamber cover while under water.

Q

Do not use in hot springs or heated pools.

Q

Do not dive into water with the camera or otherwise subject it to excessive force.

Q

If the camera is left on the sand, its temperature may exceed operating limits and sand may

get into the speaker or microphone.

Q

Sunscreen, suntan lotion, or other oily substances may discolor the camera body and should

be removed with a damp cloth.

Q

The camera may lose water resistance if subjected to excessive force or vibration. Consult your

retailer or a FUJIFILM-authorized repair technician.

xiv

Product Features and Precautions for Use

■

After Use

Q

Remove any foreign matter from the water-resistant seal and adjacent surfaces. Foreign mat-

ter could damage the seal, lowering water resistance.

Q

After using the camera underwater or in locations where foreign matter might adhere to the

camera body, rinse the camera under the tap or leave it in a basin of fresh water for two to

three minutes.

Q

Liquid soaps, detergents, alcohol, and other cleansers may a ect water resistance and should

never be used.

Q

After use, remove water droplets and foreign matter with a dry cloth,  rmly latch the battery-

chamber cover, and soak the camera in fresh water for about ten minutes. Dry the camera

thoroughly after removing it from the water.

■

Storage and Maintenance

Q

Do not store at temperatures below 0°C (32°F) or above 40°C (104°F).

Q

To ensure continued water resistance, it is recommended that you have the water-resistant

seal replaced about once a year (a fee is charged for this service). Contact your retailer or a

FUJIFILM-authorized repair technician for more information.

■

Cold Climates

Q

Battery performance drops at low temperatures, reducing the number of pictures that can be

taken. Insulate the camera to keep it warm or place it in your clothing.

Q

Use an NP-45A battery.

Q

Display response may slow at low temperatures. This is not a malfunction.

xv

Table of Contents

For Your Safety ..................................................................ii

IMPORTANT SAFETY INSTRUCTIONS ..................................ii

Safety Notes ....................................................................iv

About This Manual ...........................................................xi

Frequently-Used Buttons ...............................................xii

Product Features and Precautions for Use....................xiii

Before You Begin

Symbols and Conventions .................................................1

Supplied Accessories .........................................................1

Parts of the Camera ..........................................................2

Camera Displays ...............................................................4

Shooting ........................................................................4

Playback .........................................................................5

First Steps

Charging the Battery ........................................................7

Inserting the Battery and a Memory Card .......................9

Compatible Memory Cards .............................................14

Turning the Camera on and O ......................................16

Shooting Mode ..............................................................16

Playback Mode ...............................................................16

Basic Setup ......................................................................18

Basic Photography and Playback

Taking Pictures in Q (Scene Recognition) Mode ......19

Viewing Pictures .............................................................23

More on Photography

Shooting Mode ................................................................24

Choosing a Shooting Mode ............................................24

Shooting Mode Options .................................................25

r MOTION PANORAMA ..............................................27

Recording GPS Data with Pictures .................................29

b Intelligent Face Detection .......................................32

Focus Lock ........................................................................33

d Exposure Compensation ..........................................35

F Macro Mode (Close-ups) ...........................................36

N Using the Flash (Intelligent Flash) ............................37

h Using the Self-Timer .................................................39

xvi

Table of Contents

More on Playback

Playback Options .............................................................40

I Favorites: Rating Pictures .........................................40

Playback Zoom ...............................................................41

Multi-Frame Playback ....................................................42

A Deleting Pictures ......................................................43

b Image Search ............................................................44

k PhotoBook Assist......................................................45

Creating a PhotoBook.....................................................45

Viewing Photobooks ......................................................46

Editing and Deleting Photobooks ...................................46

Viewing Panoramas ........................................................47

Movies

Recording Movies ............................................................48

Viewing Movies ...............................................................50

Connections

Viewing Pictures on TV ...................................................51

Printing Pictures via USB ................................................52

Printing the DPOF Print Order.........................................54

Viewing Pictures on a Computer ....................................56

Windows: Installing MyFinePix Studio ...........................56

Macintosh: Installing FinePixViewer...............................58

Connecting the Camera ..................................................60

Menus

Using the Menus: Shooting Mode ..................................63

Using the Shooting Menu...............................................63

Shooting Menu Options .................................................63

A SHOOTING MODE ....................................................63

N ISO ........................................................................64

O IMAGE SIZE ............................................................65

T IMAGE QUALITY .....................................................66

P FINEPIX COLOR .......................................................66

D WHITE BALANCE ....................................................67

R CONTINUOUS .........................................................68

b FACE DETECTION .....................................................68

F AF MODE ...............................................................69

V MOVIE QUALITY .....................................................69

q LED ILLUMINATOR...................................................69

xvii

Table of Contents

Using the Menus: Playback Mode ..................................70

Using the Pla

yback Menu ...............................................70

Playback Menu Options ..................................................70

k PHOTOBOOK ASSIST ................................................70

R PHOTO NAVIGATION ................................................71

b IMAGE SEARCH ......................................................71

A ERASE ...................................................................71

N EDIT ......................................................................72

j MARK FOR UPLOAD TO ............................................73

I SLIDE SHOW ..........................................................74

B RED EYE REMOVAL .................................................75

D PROTECT ................................................................75

G CROP .....................................................................76

O RESIZE ...................................................................76

C IMAGE ROTATE .......................................................77

E COPY .....................................................................77

S TRANSITION ...........................................................78

L MOVIE TRIMMING ...................................................78

MOVIE JOIN ..................................................................79

K PRINT ORDER (DPOF) ..............................................79

The Setup Menu ..............................................................80

Using the Setup Menu ....................................................80

Setup Menu Options ......................................................81

F DATE/TIME .............................................................81

N TIME DIFFERENCE ...................................................81

L a ......................................................81

o SILENT MODE .........................................................81

R RESET ....................................................................82

K FORMAT ................................................................82

R LOCATION SEARCH ..................................................82

R TRACKING DATA ......................................................83

R LOCATION INFO.......................................................83

R km/mile ................................................................83

A IMAGE DISP. ...........................................................84

B FRAME NO. ............................................................84

G OPERATION VOL. .....................................................85

H SHUTTER VOLUME ..................................................85

e SOUND ..................................................................85

I PLAYBA

CK VOLUME ................................................85

J LCD BRIGHTNESS ....................................................85

E LCD MODE .............................................................86

M AUTO POWER OFF ...................................................86

L DUAL IS MODE .......................................................86

B RED EYE REMOVAL .................................................86

D DIGITAL ZOOM .......................................................87

n SAVE ORG IMAGE ....................................................87

c GUIDANCE DISPLAY ................................................87

Q VIDEO SYSTEM .......................................................88

xviii

Table of Contents

Technical Notes

Optional Accessories .......................................................89

Accessories from FUJIFILM..............................................90

Caring for the Camera .....................................................91

Storage and Use .............................................................91

Condensation ................................................................91

Cleaning .........................................................................92

Traveling ........................................................................92

Troubleshooting

Problems and Solutions ..................................................93

Warning Messages and Displays ....................................99

Appendix

Tips and Tricks................................................................103

Internal Memory/Memory Card Capacity ....................106

Speci cations ................................................................107

1

Before You Begin

Symbols and Conventions

The following symbols are used in this manual:

Q : This information should be read before use to ensure correct operation.

R : Additional information that may be helpful when using the camera.

P : Other pages in this manual on which related information may be found.

Menus and other text in the LCD monitor are shown in bold. In the illustra-

tions in this manual, displays may be simpli ed for explanatory purposes.

Supplied Accessories

The following items are included with the camera:

NP-45A rechargeable

battery

BC-45B battery charger USB cable CD-ROM (contains

this manual)

• Strap

• User Guide

Attaching the Strap

Attach the strap as shown.

2 Before You Begin

Parts of the Camera

For more information, refer to the page listed to the right of each item.

Selector button

Move cursor down

h (self-timer) button (P 39)

MENU/OK button

Move cursor right

N ( ash) button (P 37)

Move cursor up

d (exposure compensation) button (P 35)

b (delete) button (P xii)

Move cursor left

F (macro) button (P 36)

3Before You Begin

Parts of the Camera

1 Zoom control ...........................................................20, 41

2 Shutter button .............................................................. 21

3 ON/OFF button ............................................................. 16

4 Flash ............................................................................. 37

5 Self-timer lamp ............................................................ 39

LED illuminator ............................................................. 69

6 Built-in GPS antenna .................................................... 29

7 Lens/protective glass

8 Speaker ......................................................................... 50

9 Microphone .................................................................. 48

10 LCD monitor .................................................................... 4

11 t (movie recording) button ........................................ 48

12 Indicator lamp (see below)

13 Strap eyelet .................................................................... 1

14 Battery-chamber cover latch .....................................9, 12

15 Connector cover latch ........................................51, 52, 60

16 DISP (display)/BACK button .....................................6, 18

o (silent mode) button

*

..............................................xii

17 a (playback) button................................................... 23

18 Tripod mount

19 USB multi-connector ...............................................52, 60

20 Memory card slot .......................................................... 11

21 Battery latch ............................................................10, 13

22 Battery chamber ............................................................. 9

* Press and hold the DISP/BACK button until o is displayed.

The Indicator Lamp

The indicator lamp shows camera status as follows:

Indicator lamp

Camera status

Glows green

Glows green Focus locked.

Blinks green

Blinks green Blur, focus, or exposure warning. Picture can be taken.

Blinks green and orange

Blinks green and orange Recording pictures. Additional pictures can be taken.

Glows orange

Glows orange Recording pictures. No additional pictures can be taken at this time.

Blinks orange

Blinks orange Flash charging;  ash will not  re when picture is taken.

Blinks red

Blinks red Lens or memory error.

4 Before You Begin

Parts of the Camera

Camera Displays

The following types of indicator may be displayed during shooting and play-

back. Indicators vary with camera settings.

■ Shooting

N

10:00

AM

10:00

AM

9

250

F

4.5

F

4.5

P

800

2

3

-

1

-

1

12 / 31 / 2050

12/31/2050

7 Movie quality ................................................................ 48

8 Number of available frames ........................................ 106

9 Sensitivity ..................................................................... 64

10 Image size and quality .............................................65, 66

11 FINEPIX color ................................................................ 66

12 White balance ............................................................... 67

13 Battery level ................................................................... 5

14 Dual IS mode ................................................................ 86

15 GPS signal strength....................................................... 29

16 Exposure compensation ................................................ 35

17 Date and time ............................................................... 18

18 Blur warning ............................................................38, 99

19 Focus warning .........................................................21, 99

20 Self-timer indicator ...................................................... 39

21 Macro (close-up) mode ................................................. 36

22 Flash mode ................................................................... 37

1 Shooting mode ............................................................. 24

2 Intelligent Face Detection indicator .............................. 32

3 Continuous shooting mode ........................................... 68

4 Silent mode indicator ................................................3, 81

5 Focus frame .................................................................. 33

6 Internal memory indicator

*

* a: indicates that no memory card is inserted and that pictures will be stored in the camera’s internal memory (P 11).

5Before You Begin

Parts of the Camera

■ Playback

100-0001

400

10:00

AM

10:00

AM

2

-

1

-

1

1 / 250

F

4.5

F

4.5

3

4:3

N

YouTube

12 / 31 / 2050

1 Playback mode indicator..........................................23, 40

2 Intelligent Face Detection indicator .........................32, 75

3 Red-eye removal indicator ............................................ 75

4 Portrait enhancer .......................................................... 25

5 Silent mode indicator ................................................3, 81

6 Gift image ..................................................................... 40

7 Frame number .............................................................. 84

8 GPS data ....................................................................... 30

9 Mark for upload to ........................................................ 73

10 Photobook assist........................................................... 45

11 Favorites ....................................................................... 40

12 DPOF print indicator ..................................................... 54

13 Protected image ........................................................... 75

Battery Level

Battery level is shown as follows:

Indicator

Description

D (white)

Battery partially discharged.

C (white)

Battery more than half discharged.

B (red)

Low battery. Charge as soon as possible.

A (blinks red)

Battery exhausted. Turn camera o and charge battery.

6 Before You Begin

Parts of the Camera

Hiding and Viewing Indicators

Press DISP/BACK to cycle through shooting and playback indicators as follows:

• Shooting: Indicators displayed/indicators hidden/best framing

• Playback: Indicators displayed/indicators hidden/I favorites

7

First Steps

Charging the Battery

The battery is not charged at shipment. Charge the battery before use.

1

Place the battery in the supplied battery charger.

Insert the battery in the orientation

indicated by the CBD labels.

The camera uses an NP-45A recharge-

able battery.

Battery charger

CBD

label

CBD label

Arrow

Battery

2

Plug the charger in.

Plug the charger into a power outlet. The charging indicator will light.

The Charging Indicator

The charging indicator shows battery charge status as follows:

Charging indicator

Battery status

Action

O

Battery not inserted.

Insert the battery.

On (green)

Battery fully charged.

Remove the battery.

On (yellow)

Battery charging.

—

Blinks (yellow)

Battery fault.

Unplug the charger and remove the battery.

8 First Steps

Charging the Battery

3

Charge the battery.

Remove the battery when charging is complete. See the speci cations

(P 111) for charging times (note that charging times increase at low tem-

peratures).

Q Unplug the charger when it is not in use.

9 First Steps

Inserting the Battery and a Memory Card

Although the camera can store pictures in internal memory, optional SD,

SDHC, and SDXC memory cards (sold separately) can be used to store addi-

tional pictures. After charging the battery, insert the battery and memory

card as described below.

1

Open the battery-chamber cover.

Press the latch as shown.

R Be sure the camera is o before opening the

battery-chamber cover.

Q Do not open the battery-chamber cover when

the camera is on. Failure to observe this pre-

caution could result in damage to image  les or memory cards.

Q Do not use excessive force when handling the battery-chamber cover.

Q Remove water droplets and other foreign matter with a dry cloth before open-

ing the battery-chamber cover.

10 First Steps

Inserting the Battery and a Memory Card

2

Insert the battery.

Insert the battery with the terminal  rst and

in the orientation shown by the label inside

the battery chamber, keeping the battery

latch pressed to one side. Con rm that the

battery is securely latched.

Q Insert the battery in the correct orientation.

Do NOT use force or attempt to insert the bat-

tery upside down or backwards. The battery

will slide in easily in the correct orientation.

Label

Battery latch

11 First Steps

Inserting the Battery and a Memory Card

3

Insert the memory card.

Holding the memory card in the orientation

shown at right, slide it in until it clicks into

place at the back of the slot.

Q Be sure card is in the correct orientation; do

not insert at an angle or use force. If the mem-

ory card is not correctly inserted or no mem-

ory card is inserted, a will appear in the LCD

monitor and internal memory will be used for

recording and playback.

Click

Q SD/SDHC/SDXC memory cards can be locked,

making it impossible to format the card or to

record or delete images. Before inserting an

SD/SDHC/SDXC memory card, slide the write-

protect switch to the unlocked position.

Write-protect switch

12 First Steps

Inserting the Battery and a Memory Card

4

Close the battery-chamber cover.

Before closing the cover, check to con rm

that there is no dust, sand, or other foreign

matter on the water-resistant seal or adja-

cent surfaces.

Con rming That the Cover Is Latched

• Con rm that the battery-chamber or connector cover does not protrude from the

camera body.

• The covers are latched when the latches are in the positions shown below at left.

Latch indicator

Con rm that there

are no gaps.

Unlatched

Latched

13 First Steps

Inserting the Battery and a Memory Card

Removing the Battery and Memory Card

Before removing the battery or memory card, turn the camera o and press the latch

to open the battery-chamber cover.

To remove the battery, press the battery latch to the side, and

slide the battery out of the camera as shown.

Battery latch

To remove the memory card, press it in and release it slowly.

The card can then be removed by hand. When a memory card

is removed, the card could come out of the slot too quickly.

Use your  nger to hold it and gently release the card.

14 First Steps

Inserting the Battery and a Memory Card

■ Compatible Memory Cards

FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been ap-

proved for use in the camera. A complete list of approved memory cards

is available at http://www.fujifilm.com/support/digital_cameras/compatibility/.

Operation is not guaranteed with other cards. The camera can not be used

with xD-Picture Cards or MultiMediaCard (MMC) devices.

Q

Memory Cards

• Do not turn the camera o or remove the memory card while the memory card is being formatted

or data are being recorded to or deleted from the card. Failure to observe this precaution

could damage the card.

• Format SD/SDHC/SDXC memory cards before  rst use, and be sure to reformat all

memory cards after using them in a computer or other device. For more information

on formatting memory cards, see “K FORMAT” ( P 82).

• Memory cards are small and can be swallowed; keep out of reach of children. If a

child swallows a memory card, seek medical assistance immediately.

• miniSD or microSD adapters that are larger or smaller than the standard dimensions

of an SD/SDHC/SDXC card may not eject normally; if the card does not eject, take

the camera to an authorized service representative. Do not forcibly remove the card.

• Do not a x labels to memory cards. Peeling labels can cause camera malfunction.

• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory

card. Use a G card or better when shooting HD movies.

15 First Steps

Inserting the Battery and a Memory Card

• The data in internal memory may be erased or corrupted when the camera is re-

paired. Please note that the repairer will be able to view pictures in internal memory.

• Formatting a memory card or internal memory in the camera creates a folder in

which pictures are stored. Do not rename or delete this folder or use a computer or

other device to edit, delete, or rename image  les. Always use the camera to delete

pictures from memory cards and internal memory; before editing or renaming  les,

copy them to a computer and edit or rename the copies, not the originals.

Q

Batteries

• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this

precaution could prevent the battery from charging.

• Do not a x stickers or other objects to the battery. Failure to observe this precaution

could make it impossible to remove the battery from the camera.

• Do not short the battery terminals. The battery could overheat.

• Read the cautions in “The Battery and Power Supply” (P vi).

• Use only battery chargers designated for use with the battery. Failure to observe this

precaution could result in product malfunction.

• Do not remove the labels from the battery or attempt to split or peel the outer casing.

• The battery gradually loses its charge when not in use. Charge the battery one or

two days before use.

16 First Steps

Turning the Camera on and O

Shooting Mode

Press the ON/OFF button to turn the

camera on.

Press ON/OFF again to turn the camera

o .

R

Switching to Playback Mode

Press the a button to start playback.

Press the shutter button halfway to return

to shooting mode.

Playback Mode

To turn the camera on and begin

playback, press the a button for

about a second.

Press the a button again or press

the ON/OFF button to turn the camera

o .

R

Switching to Shooting Mode

To exit to shooting mode, press the shut-

ter button halfway. Press the a button

to return to playback.

17 First Steps

Turning the Camera on and O

Q Fingerprints and other marks on the protective glass covering the lens can a ect

pictures. Keep the glass clean.

Q The ON/OFF button does not completely end the supply of power to the camera.

R

Auto Power O

The camera will turn o automatically if no operations are performed for the length of

time selected for M AUTO POWER OFF (P 86). To turn the camera on, use the ON/OFF

button or press the a button for about a second.

18 First Steps

Basic Setup

A language-selection dialog is displayed the  rst time the camera is turned

on. Set up the camera as described below (you can reset the clock or change

languages at any time using the F DATE/TIME or L a options in

the setup menu; for information on displaying the setup menu, see page 81).

1

Highlight a language and press MENU/OK.

R Press DISP/BACK to skip the current step. Any steps you skip

will be displayed the next time the camera is turned on.

START MENU

ENGLISH

NOSET

DEUTSCH

FRANCAIS

ESPAÑOL

PORTUGUÊS

2

The date and time will be displayed. Press the selector

left or right to highlight the year, month, day, hour, or

minute and press up or down to change. To change the

order in which the year, month, and day are displayed,

highlight the date format and press the selector up or

down. Press MENU/OK when settings are complete.

R

The Camera Clock

If the battery is removed for an extended period, the camera clock will be reset and the

language-selection dialog will be displayed when the camera is turned on.

NOSET

DATE/TIME NOT SET

2013

2012

2010

2009

1. 1 12

:

00

AM

2011

YY. MM. DD

19

Basic Photography and Playback

Taking Pictures in

Q

(Scene Recognition) Mode

This section describes how to take pictures in

Q

Q (

scene recognition

scene recognition) mode.

The camera automatically analyzes the composition and adjusts settings ap-

propriately.

1

Turn the camera on.

Press the ON/OFF button to turn the camera on.

Q shooting indicators will be displayed.

The

g

Icon

This icon indicates that the camera continuously searches for faces to select the

appropriate scene, increasing the drain on the battery.

The Scene Icon

The camera selects the scene according to shooting conditions and the type of

subject: b PORTRAIT (portraits), c LANDSCAPE (landscapes), d NIGHT (poorly-lit land-

scapes), e MACRO (close ups), f NIGHT PORTRAIT (poorly-lit portraits), g BACKLIT PORTRAIT

(backlit portraits), a AUTO (all other scenes)

20 Basic Photography and Playback

Taking Pictures in Q (Scene Recognition) Mode

2

Frame the picture.

Use the zoom control to frame the picture in the display.

Zoom out Zoom in

Zoom indicator

Holding the Camera

Hold the camera steady with both hands and brace your

elbows against your sides. Shaking or unsteady hands can

blur your shots.

To prevent pictures that are out of focus or too dark (under-

exposed), keep your  ngers and other objects away from

the  ash and from the protective glass covering the lens.

21Basic Photography and Playback

Taking Pictures in Q (Scene Recognition) Mode

3

Focus.

Press the shutter button halfway to focus.

R The lens may make a noise when the camera focuses; this

is normal.

If the camera is able to focus, it will beep twice and the in-

dicator lamp will glow green.

If the camera is unable to focus, the focus frame will turn red, s will be dis-

played, and the indicator lamp will blink green. Change the composition

or use focus lock (P 33).

Double

beep

22 Basic Photography and Playback

Taking Pictures in Q (Scene Recognition) Mode

4

Shoot.

Smoothly press the shutter button the rest of the way

down to take the picture.

R If the subject is poorly lit, the  ash may  re when the pic-

ture is taken. For information on using the  ash when

lighting is poor, see “N Using the Flash (Intelligent Flash)”

(P 37).

The Shutter Button

The shutter button has two positions. Pressing the shutter button halfway sets

focus and exposure; to shoot, press the shutter button the rest of the way down.

Click

23Basic Photography and Playback

Viewing Pictures

Pictures can be viewed in the LCD monitor. When taking important photo-

graphs, take a test shot and check the results.

1

Press the a button.

The most recent picture will be displayed.

2

View additional pictures.

Press the selector right to view pictures in the

order recorded, left to view pictures in reverse

order.

Press the shutter button halfway to exit to shoot-

ing mode.

24

More on Photography

Shooting Mode

Choose a shooting mode according to the scene or type of subject.

Choosing a Shooting Mode

1

Press MENU/OK to display the shooting menu.

2

Highlight A SHOOTING MODE and press the

selector right to display shooting mode options.

SET

SHOOTING MENU

EXIT

SHOOTING MODE

3

Highlight the desired mode and press MENU/OK.

CANCELSET

Q

SCENE RECOGNITION

Selects optimum

camera settings

for certain modes.

4

Press DISP/BACK to exit to shooting mode.

25More on Photography

Shooting Mode

Shooting Mode Options

Mode

Description

Q

SCENE RECOGNITION

The camera automatically analyzes the composition and selects a scene

according to shooting conditions and the type of subject.

B

AUTO

Choose for crisp, clear snapshots. This mode is recommended in most

situations.

P PROGRAM AE

P PROGRAM AE The camera sets exposure automatically.

C

NATURAL &

N

The camera takes two shots: one without the  ash and one with.

D

NATURAL LIGHT

Capture natural lighting under low-light conditions.

L

PORTRAIT

Choose for portraits.

Z

PORTRAIT ENHANCER

Choose for a smooth skin e ect when shooting portraits.

M

LANDSCAPE

Choose for daylight shots of buildings and landscapes.

r

MOTION PANORAMA

Take up to three pictures and join them together to form a panorama.

N

SPORT

Choose when photographing moving subjects.

O

NIGHT

Choose this mode for poorly lit twilight or night scenes.

H

NIGHT (TRIPOD)

Choose this mode for slow shutter speeds when shooting at night.

Q

SUNSET

Choose this mode to record the vivid colors in sunrises and sunsets.

R

SNOW

Choose for crisp, clear shots that capture the brightness of scenes domi-

nated by shining white snow.

S

BEACH

Choose for crisp, clear shots that capture the brightness of sunlit beaches.

26 More on Photography

Shooting Mode

Mode

Description

F

UNDERWATER

Choose for underwater photography.

t

UNDER WATER

(WIDE)

Choose for wide-angle underwater shots that include more of the back-

ground behind the main subject.

s

UNDER WATER

(MACRO)

Choose for underwater close-ups of small objects.

U

PARTY

Capture indoor background lighting under low-light conditions.

V

FLOWER

Choose for vivid close-ups of  owers.

W

TEXT

Take clear pictures of text or drawings in print.

27More on Photography

Shooting Mode

■ r MOTION PANORAMA

In this mode, you can take up to three pictures and join them together to

form a panorama. Use of a tripod is recommended to assist in composing

overlapping shots.

1

Press the selector up to select a frame. Press the selector left or right to

highlight a pan direction and press MENU/OK.

2

Take a photograph. Exposure and white balance for the panorama are set

with the  rst shot.

3

Frame the next shot to overlap with the previous picture by superimpos-

ing y on + so that they form a solid circle (z). The camera will release the

shutter automatically.

Pan direction

2

3

1

END CANCEL

2

3

1

END CANCEL

Display after 1st shot Shutter released

28 More on Photography

Shooting Mode

4

Take the last shot as described in Step 3.

R To end shooting and create a panorama after the  rst or second shot, press the

multi selector up after completing Step 2 or Step 3 and proceed to Step 5.

5

Press MENU/OK to save the picture.

Q Panoramas are created from multiple frames. The camera may in some cases be

unable to stitch the frames together perfectly.

Q The desired results may not be achieved with moving subjects, subjects close to

the camera, unvarying subjects such as the sky or a  eld of grass, subjects that are

in constant motion, such as waves and waterfalls, or subjects that undergo marked

changes in brightness. Panoramas may be blurred if the subject is poorly lit.

For Best Results

For best results, be careful not to tilt the camera backward or forward or to either

side and try not to move the camera while y and + are aligned to form a solid circle.

Printing Panoramas

Depending on the page size and the size of the panorama, panoramas may print

with their edges cropped out or with wide margins at the top and bottom or at

both sides.

29More on Photography

Recording GPS Data with Pictures

To record GPS data with new pictures, press MENU/OK and select one of the fol-

lowing options for R LOCATION SEARCH in the setup menu (P 82).

• T PERMANENTLY ON: The camera continues to update GPS data even when

turned o . The camera will be quicker to display GPS data when turned on,

but the drain on the battery will increase.

• U WHEN SWITCHED ON: The camera updates GPS data only when on. The cam-

era may need some time to acquire GPS data when turned on. This option is

selected automatically at battery levels of

B and below.

R GPS works best outdoors under clear skies.

During shooting, GPS data are displayed in the monitor as

shown at right. Signal strength is indicated by the number

of bars; O is displayed when the camera is searching for a

signal and P if no signal is detected. The current location

is shown by a place name or (if no place name is available)

by the longitude and latitude.

R The display of GPS information can be turned o by selecting OFF for R LOCA-

TION INFO (P 83).

Location Signal

strength

P

-

MINATO, TOKYO, JAPAN

30 More on Photography

Recording GPS Data with Pictures

Q Using GPS increases the drain on the battery, causing battery performance to drop

at low temperatures.

Q The receiver may have an error of a few hundred meters (yards).

Q The camera may be unable to receive GPS data in some locations. If possible,

choose an outdoor location with few obstructions when turning the camera on.

Q The position recorded when a photo is taken may di er from the actual location if

some time has passed since the camera was last able to update GPS data.

Q Select OFF for R LOCATION SEARCH (P 82) and R TRACKING DATA (P 83) in

the setup menu when in a hospital and before takeo and landing if traveling by air.

Q Place names are current as of the date on which the map database was created

(P 109) and will not be updated to re ect any changes after that date.

Q Comprehensive place name data are unavailable in some countries and regions. If

no name is available, the latitude and longitude will be displayed for a few seconds.

Viewing GPS Data

During playback, pictures for which GPS data exist are indicated

by a

J icon. GPS data are shown for a few seconds each time

the picture is displayed.

GPS icon

100-0001

-

MINATO, TOKYO, JAPAN

31More on Photography

Recording GPS Data with Pictures

GPS

The camera may be unable to receive GPS data if the antenna (P 2) is obstructed or

when underground, underwater, under a bridge or overpass, inside a vehicle, build-

ing, tunnel, or metal briefcase, between tall buildings, or in the vicinity of cell phones

or other devices that broadcast in the 1.5 GHz band.

Obey all local regulations regarding the use of GPS devices. Note that the use of

GPS devices is restricted in some countries, including the People’s Republic of China.

Before going abroad, consult with the embassy or a travel agent. The camera may

display

P (no signal) in locations in which restrictions apply.

32 More on Photography

b

Intelligent Face Detection

Intelligent Face Detection sets focus and exposure for human faces anywhere

in the frame, preventing the camera from focusing on the background in

group portraits. Choose for shots that emphasize portrait subjects.

To use Intelligent Face Detection, press MENU/OK

to display the shooting menu and select ON for

b FACE DETECTION ( P 68). Faces can be detected

with the camera in vertical or horizontal orientation;

if a face is detected, it will be indicated by a green

border. If there is more than one face in the frame,

the camera will select the face closest to the center;

other faces are indicated by white borders.

Q In some modes, the camera may set exposure for the frame as a whole rather than

the portrait subject.

Q If the subject moves as the shutter button is pressed, their face may not be in the

area indicated by the green border when the picture is taken.

33More on Photography

Focus Lock

To compose photographs with o -center subjects:

1

Focus:

Position the subject in the focus frame (U)

and press the shutter button halfway to lock focus

and exposure. Focus and exposure will remain locked

while the shutter button is pressed halfway (AF/AE

lock).

2

Recompose: Keep the button pressed halfway.

3

Shoot: Press the button all the way down.

34 More on Photography

Focus Lock

Autofocus

Although the camera boasts a high-precision autofocus system, it may be unable to

focus on the subjects listed below. If the camera is unable to focus, focus on another

subject at the same distance and use focus lock to recompose the photograph.

• Very shiny subjects such as mirrors or car bodies.

• Fast-moving subjects.

• Subjects photographed through a window or other re-

 ective object.

• Dark subjects and subjects that absorb rather than re ect

light, such as hair or fur.

• Insubstantial subjects, such as smoke or  ame.

• Subjects that show little contrast with the background

(for example, subjects in clothing that is the same color

as the background).

• Subjects positioned in front of or behind a high-contrast

object that is also in the focus frame (for example, a

subject photographed against a backdrop of highly con-

trasting elements).

35More on Photography

d

Exposure Compensation

To adjust exposure compensation when photo-

graphing very bright, very dark, or high-contrast

subjects, press the selector up (d). Press the selec-

tor up or down to choose an exposure compensa-

tion value and then press MENU/OK.

Choose positive (+) values

to increase exposure

Choose negative (–) values

to reduce exposure

R A d icon and exposure indicator are displayed at settings other than ±0. Exposure

compensation is not reset when the camera is turned o ; to restore normal expo-

sure control, choose a value of ±0.

R Turn the  ash o when using exposure compensation.

R Exposure compensation is available only when P (PROGRAM AE) is selected for

shooting mode.

36 More on Photography

F

Macro Mode (Close-ups)

For close-ups, press the selector left (F) and select

F. When macro mode is in e ect, the camera fo-

cuses on subjects near the center of the frame. Use

the zoom control to compose pictures (P 20).

To exit macro mode, press the selector left (F) and

select H.

R Use of a tripod is recommended to prevent blur caused

by camera shake.

OFF

37More on Photography

N

Using the Flash (Intelligent Flash)

When the  ash is used, the camera’s Intelligent Flash system instantly analyzes

the scene based on such factors as the brightness of the subject, its position

in the frame, and its distance from the camera. Flash output and sensitivity

are adjusted to ensure that the main subject is correctly exposed while pre-

serving the e ects of ambient background lighting, even in dimly-lit indoor

scenes. Use the  ash when lighting is poor, for example when shooting at

night or indoors under low light.

Press the selector right (N) and choose from the fol-

lowing  ash modes:

P

AUTO FLASH

According to

shooting conditions

Option

Description

AUTO

/

K

(

AUTO FLASH

)

The  ash  res when required. Recommended in most situations.

N

/

L

(

FORCED FLASH

)

The  ash  res whenever a picture is taken. Use for backlit subjects or for natural

coloration when shooting in bright light.

P

(

SUPPRESSED FLASH

)

The  ash does not  re even when the subject is poorly lit. Use of a tripod is

recommended.

O

/

M

(

SLOW SYNCHRO

)

Capture both the main subject and the background under low light (note that

brightly lit scenes may be overexposed).

38 More on Photography

N Using the Flash (Intelligent Flash)

R If the  ash will  re, p will be displayed when the shutter button is pressed halfway.

At slow shutter speeds, k will appear in the display to warn that pictures may be

blurred; use of a tripod is recommended.

R The  ash may  re several times with each shot. Do not move the camera until

shooting is complete.

R The  ash may cause vignetting.

Red-Eye Removal

When Intelligent Face Detection (P 32) and red-eye removal (P 75) are

on, red-eye removal is available in auto (K; RED EYE REDUCTION),  ash

on (L; FORCED FLASH), and slow sync (M; RED EYE & SLOW) modes.

Red-eye removal minimizes “red-eye” caused when light from the  ash is

re ected from the subject’s retinas as shown in the illustration at right.

39More on Photography

h

Using the Self-Timer

To use the self-timer, press the selector down (h)

and choose from the following options:

OFF

Option

Description

T (OFF) Self-timer o .

a ( COUPLE TIMER)

The camera starts the timer when it detects two portrait subjects close together.

Press the selector up to choose how close the subjects must be together before

the timer starts (the more hearts, the closer the subjects must be together).

R

To stop the timer before the picture is taken, press

DISP/BACK

.

g ( GROUP TIMER)

The camera will start the timer when it detects the selected number of portrait

subjects. Press the selector up to choose the number of subjects.

R

To stop the timer before the picture is taken, press

DISP/BACK

.

S (10 SEC)

The shutter is released ten seconds after the shutter button is pressed. Use for

self-portraits. The self-timer lamp on the front of the camera blinks while the

timer counts down.

R (2 SEC)

The shutter is released two seconds after the shutter button is pressed. Use to

reduce blur caused by the camera moving when the shutter-release button is

pressed. The self-timer lamp will blink as the timer counts down.

40

More on Playback

Playback Options

To view the most recent picture in the LCD monitor, press the a button.

100-0001

Press the selector right to view pictures in the order recorded, left to view

pictures in reverse order. Keep the selector pressed to scroll rapidly to the

desired frame.

R Pictures taken using other cameras are indicated by a m (“gift image”) icon during

playback.

I

Favorites: Rating Pictures

To rate the picture currently displayed in full-frame playback, press DISP/BACK

and press the selector up and down to select from zero to  ve stars.

41More on Playback

Playback Options

Playback Zoom

Select T to zoom in on pictures displayed in single-frame playback; select W to

zoom out. When the picture is zoomed in, the selector can be used to view

areas of the image not currently visible in the display.

Navigation window shows

portion of image currently

displayed in LCD monitor

Zoom indicator

Press DISP/BACK to exit zoom.

R The maximum zoom ratio varies with image size. Playback zoom is not available

with cropped or resized copies saved at a size of a or smaller.

42 More on Playback

Playback Options

Multi-Frame Playback

Selecting W when a picture is shown full-frame in the LCD monitor displays

the current image with previous and following images in the background.

Select W to increase the number of images displayed to two, nine, or one

hundred, T to view fewer images.

100-0001

When two or more images are displayed, use the selector to highlight images

and press MENU/OK to view the highlighted image full frame. In the nine- and

hundred-frame displays, use the selector to view more pictures.

43More on Playback

A

Deleting Pictures

To delete individual pictures, multiple selected

pictures, or all pictures, press MENU/OK, select

A ERASE ( P 71), and choose from the options be-

low. Note that deleted pictures can not be recov-

ered. Copy important pictures to a computer or other storage device before

proceeding.

Option

Description

FRAME

Press the selector left or right to scroll through pictures and press MENU/OK

to delete the current picture (a con rmation dialog is not displayed).

SELECTED FRAMES

Highlight pictures and press MENU/OK to select or deselect (pictures that

are protected or in a print order are shown by u). When the operation is

complete, press DISP/BACK to display a con rmation dialog, then highlight

OK and press MENU/OK to delete the selected pictures.

ALL FRAMES

A con rmation dialog will be displayed; highlight OK and press MENU/OK to

delete all unprotected pictures (if a memory card is inserted, only the pic-

tures on the memory card will be a ected; the pictures in internal memory

are only deleted if no memory card is inserted). Pressing DISP/BACK cancels

deletion; note that any pictures deleted before the button was pressed can

not be recovered.

R Protected pictures can not be deleted. Remove protection from any pictures you

wish to delete (P 75).

R If a message appears stating that the selected images are part of a DPOF print order,

press MENU/OK to delete the pictures.

SET

PLAYBACK MENU

ERASE

FRAME

SELECTED FRAMES

ALL FRAMES

BACK

44 More on Playback

b

Image Search

Search for pictures.

1

Select b IMAGE SEARCH in the playback menu (P 71), highlight one of

the following search criteria, and press MENU/OK:

• BY DATE: Search by date.

• BY GPS LOCATION NAME: Search by location name (location names that do

not begin with a letter from A to Z are listed in the search conditions

under “#”).

• BY FACE: Search for faces from the face recognition database.

• BY

I FAVORITES: Search by rating.

• BY SCENE: Search by scene.

• BY TYPE OF DATA: Find all still pictures, all movies, or edited pictures.

• BY UPLOAD MARK: Find all pictures selected for upload to a speci ed desti-

nation.

2

Select a search condition. Only pictures that match the search condition

will be displayed. To delete or protect selected pictures or to view the

search results in a slide show, press MENU/OK and choose A ERASE (P 43),

D PROTECT (P 75), or I SLIDE SHOW (P 74).

45More on Playback

k

PhotoBook Assist

Create books from your favorite photos.

Creating a PhotoBook

1

Select NEW BOOK for k PHOTOBOOK ASSIST in the playback menu

(P 70) and choose from the following options:

• SELECT FROM ALL: Choose from all available pictures.

• SELECT BY IMAGE SEARCH: Choose from pictures matching selected search

conditions (P

44).

R Neither photographs a or smaller nor movies can be selected for photobooks.

2

Scroll through the images and press the selector up to select or deselect.

To display the current image on the cover, press the selector down. Press

MENU/OK to exit when the book is complete.

R The  rst picture selected becomes the cover image. Press the selector down to

select a di erent image for the cover.

3

Select COMPLETE PHOTOBOOK (to select all photos or all photos match-

ing the speci ed search conditions for the book, choose SELECT ALL).

The new book will be added to the list in the photobook assist menu.

Q Books can contain up to 300 pictures.

Q Books that contain no photos are automatically deleted.

46 More on Playback

k PhotoBook Assist

Viewing Photobooks

Highlight a book in the photobook assist menu and press MENU/OK to display

the book, then press the selector left or right to scroll through the pictures.

Editing and Deleting Photobooks

Display the photobook and press MENU/OK. The following options will be dis-

played; select the desired option and follow the on-screen instructions.

• EDIT: Edit the book as described in “Creating a PhotoBook” (P 45).

• ERASE: Delete the book.

Photobooks

Photobooks can be copied to a computer using the supplied MyFinePix Studio soft-

ware.

47More on Playback

Viewing Panoramas

If you press the selector down when a panorama is displayed full frame, the

camera will play back the picture from left to right. To pause playback, press

the selector down; press the selector down again to resume. To exit to full-

frame playback, press the selector up while panorama playback is in progress.

PLAY

STOP PAUSE

48

Movies

Recording Movies

Press t to shoot a movie. During recording,

y REC and the time remaining will be displayed

in the LCD monitor and sound will be recorded via

the built-in microphone (be careful not to cover the

microphone during recording).

12

s

12

sREC

Time available is displayed

in monitor

To end recording, press the t button again. Recording ends automatically

when the movie reaches maximum length or memory is full.

R Zoom can be adjusted while recording is in progress.

R Before recording, select a frame size using the V MOVIE QUALITY option in the

shooting menu. Select h 1280 (1280 × 720) for an aspect ratio of 16 : 9 (High De ni-

tion) or f (640 × 480) to record longer standard de nition movies.

R Focus, exposure and white balance are adjusted automatically throughout record-

ing. The color and brightness of the image may vary from that displayed before

recording begins.

R Sounds made by the camera may be recorded.

49Movies

Recording Movies

Q The indicator lamp lights while movies are being recorded. Do not open the bat-

tery chamber during shooting or while the indicator lamp is lit. Failure to observe

this precaution could prevent the movie from being played back.

Q Vertical or horizontal streaks may appear in movies containing very bright subjects.

This is normal and does not indicate a malfunction.

Q The temperature of the camera may rise if it is used to record movies for an ex-

tended period or if the ambient temperature is high. This is normal and does not

indicate a malfunction.

50 Movies

Viewing Movies

During playback, movies are displayed in the LCD monitor

as shown at right. The following operations can be per-

formed while a movie is displayed:

Option

Description

Start/pause

playback

Press the selector down to start playback. Press again to

pause.

End playback/

delete

Press the selector up to end playback. If playback is not in

progress, pressing the selector up will delete the movie.

Advance/

rewind

Press the selector right to advance, left to rewind. If playback

is paused, the movie will advance or rewind one frame

each time the selector is pressed.

Adjust volume

Press MENU/OK to pause playback and display volume con-

trols. Press the selector up or down to adjust the volume

and press MENU/OK to exit. Volume can also be adjusted

from the setup menu.

PLAY

100-006

Q Do not cover the speaker during playback.

51

Connections

Viewing Pictures on TV

Connect the camera to a TV to show pictures to a group.

1

Turn the camera o and connect an optional A/V cable as shown below.

Insert into

USB multi-connector

Connect yellow plug to

video-in jack

Connect white plug to

audio-in jackConnector cover Battery-chamber cover

Q When connecting cables, be sure the connectors are fully inserted.

Q Be sure the battery-chamber cover is open before attempting to open or close

the connector cover.

R Image quality may drop during movie playback.

R Optional accessories (P 89, 90) are required to view HD movies on a high-de ni-

tion TV. The HDP-L1 HD player uses SDHC and SD memory cards.

2

Tune the television to the video input channel. See the documentation

supplied with the television for details.

3

Press the a button for about a second to turn the camera on. The camera

monitor turns o and pictures and movies are played back on the TV. Note

that the camera volume controls have no e ect on sounds played on the

TV; use the television volume controls to adjust the volume.

52 Connections

Printing Pictures via USB

If the printer supports PictBridge, the camera can be connected

directly to the printer as shown below and pictures can be printed

without  rst being copied to a computer. Note that depending on

the printer, not all the functions described below may be supported.

1

Connect the supplied USB cable as shown and turn the printer on.

Q Be sure the battery-chamber cover is open before attempting to open or close

the connector cover.

Connector cover Battery-chamber cover

2

Press the a button for about a second to turn the camera on.

3

Press the selector left or right to display a picture you wish to print.

4

Press the selector up or down to choose the number of copies (up to 99).

5

Repeat steps 3–4 to select additional pictures. Press MENU/OK to display a

con rmation dialog when settings are complete.

53Connections

Printing Pictures via USB

6

Press MENU/OK to start printing. Printing can be interrupted by pressing

DISP/BACK, but note that some printers may not respond immediately. If

the printer stops before printing is complete, turn the camera o and then

on again.

7

After con rming that PRINTING has cleared from the camera display, turn

the camera o and disconnect the USB csable.

R Pictures can be printed from internal memory or a memory card that has been

formatted in the camera.

R If no pictures are selected, the camera will print one copy of the current picture.

R Page size, print quality, and border selections are made using the printer.

Printing the Date of Recording

To print the date of recording on pictures, press DISP/BACK in the PictBridge display

and select PRINT WITH DATE s in the PictBridge menu (to print pictures without

the date of recording, select PRINT WITHOUT DATE).

54 Connections

Printing Pictures via USB

Printing the DPOF Print Order

The K PRINT ORDER (DPOF) option in the playback menu can be used to

create a digital “print order” for PictBridge-compatible printers (P 89) or de-

vices that support DPOF.

DPOF

DPOF (Digital Print Order Format) is a standard that allows pictures to be

printed from “print orders” stored in internal memory or on a memory card.

The information in the order includes the pictures to be printed and the

number of copies of each picture.

1

Select playback mode and press MENU/OK to display the playback menu.

2

Highlight K PRINT ORDER (DPOF) and press MENU/OK.

3

Highlight one of the following options and press MENU/OK:

• WITH DATE s: Print the date of recording on pictures.

• WITHOUT DATE: Do not print the date of recording on pictures.

R Some printers do not support date printing. See the printer manual for details.

4

Press the selector left or right to display a picture you wish to add to or

remove from the print order.

55Connections

Printing Pictures via USB

5

Press the selector up or down to choose the number of copies (up to 99).

To remove a picture from the print order, press the selector down until the

number of copies is zero.

6

Repeat Steps 4–5 to complete the print order and press MENU/OK when

settings are complete.

7

A con rmation dialog will be displayed. Press MENU/OK to save the print

order.

R Remove the memory card to create or modify a print order for the pictures in

internal memory.

R Print orders can contain a maximum of 999 pictures.

R If a memory card is inserted containing a print order created by another camera,

a message will be displayed. Create a new print order as described above.

56 Connections

Viewing Pictures on a Computer

The supplied software can be used to copy pictures to a computer, where

they can be stored, viewed, organized, and printed. Before proceeding, install

the software as described below. Do NOT connect the camera to the computer

until installation is complete.

Windows: Installing MyFinePix Studio

1

Con rm that the computer meets the following system requirements:

Windows 7

*

Windows Vista

*

Windows XP

*

CPU

3 GHz Pentium 4 or better

2 GHz Pentium 4 or

better

RAM

1 GB or more

512 MB or more

Free disk space

15 GB or more

2 GB or more

Video

• 1024 × 768 pixels or more with 24-bit color or better

• A graphics processing unit (GPU) that supports DirectX 7 or later

Other

• Built-in USB port recommended. Operation is not guaranteed with other

USB ports.

• Internet connection (broadband recommended) required to install

.NET Framework (if necessary), to use auto update feature, and when per-

forming such tasks as sharing pictures on-line or via e-mail.

* Other versions of Windows are not supported. Only pre-installed operating systems are

supported; operation is not guaranteed on home-built computers or computers that have

been upgraded from earlier versions of Windows.

2

Start the computer. Log in to an account with administrator privileges

before proceeding.

57Connections

Viewing Pictures on a Computer

3

Exit any applications that may be running and insert the installer CD in a

CD-ROM drive.

Windows 7/Windows Vista

If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control”

dialog will then be displayed; click Yes (Windows 7) or Allow (Windows Vista).

The installer will start automatically; click Install MyFinePix Studio and

follow the on-screen instructions to install MyFinePix Studio.

If the Installer Does Not Start Automatically

If the installer does not start automatically, select Computer or My Computer

from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX

CD window and double-click setup or SETUP.EXE.

4

If prompted to install Windows Media Player, DirectX, or .NET Framework,

follow the on-screen instructions to complete installation.

5

Remove the installer CD from the CD-ROM drive when installation is com-

plete. Store the installer CD in a dry location out of direct sunlight in case

you need to re-install the software.

Installation is now complete. Proceed to “Connecting the Camera” (P 60).

58 Connections

Viewing Pictures on a Computer

Macintosh: Installing FinePixViewer

1

Con rm that the computer meets the following system requirements:

CPU

CPU PowerPC or Intel

OS

Pre-installed copies of Mac OS X version 10.3.9–10.6 (visit http://www.fujifilm.

com/support/digital_cameras/compatibility/ for more information)

RAM

RAM 256 MB or more

Free disk space

A minimum of 200 MB required for installation with 400 MB available when

FinePixViewer is running

Video

Video 800 × 600 pixels or more with thousands of colors or better

Other

Built-in USB port recommended. Operation is not guaranteed with other USB

ports.

2

After starting the computer and quitting any applications that may be run-

ning, insert the installer CD in a CD-ROM drive and double-click Installer

for Mac OS X.

3

An installer dialog will be displayed; click Installing FinePixViewer to start

installation. Enter an administrator name and password when prompted

and click OK, then follow the on-screen instructions to install FinePixViewer.

Click Exit to quit the installer when installation is complete.

59Connections

Viewing Pictures on a Computer

4

Remove the installer CD from the CD-ROM drive. Note that you may be

unable to remove the CD if Safari is running; if necessary, quit Safari before

removing the CD. Store the installer CD in a dry location out of direct sun-

light in case you need to re-install the software.

5

Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture,

and select Preferences… from the Image Capture application menu. The

Image Capture preferences dialog will be displayed; choose Other… in

the When a camera is connected, open menu, then select FPVBridge in

the “Applications/FinePixViewer” folder and click Open. Quit Image Cap-

ture.

Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications”

folder and start Image Capture. The camera will be listed under DEVICES;

select the camera and choose FPVBridge from the Connecting this cam-

era opens menu and click Choose. Quit Image Capture.

Installation is now complete. Proceed to “Connecting the Camera” (P 60).

60 Connections

Viewing Pictures on a Computer

Connecting the Camera

1

If the pictures you wish to copy are stored on a memory card, insert the

card into the camera.

R Windows users may require the Windows CD when starting the software for

the  rst time.

Q Loss of power during transfer could result in loss of data or damage to internal

memory or the memory card. Charge the battery before connecting the camera.

2

Turn the camera o and connect the

supplied USB cable as shown, making

sure the connectors are fully inserted.

Connect the camera directly to the com-

puter; do not use a USB hub or keyboard.

Q Be sure the battery-chamber cover is open

before attempting to open or close the

connector cover.

3

Press the a button for about a second to turn the camera on. MyFinePix

Studio or FinePixViewer will start automatically; follow the on-screen in-

structions to copy pictures to the computer. To exit without copying pic-

tures, click Cancel.

R If the software does not start automatically, it may not be correctly installed.

Disconnect the camera and reinstall the software.

Connector cover

Battery-chamber

cover

61Connections

Viewing Pictures on a Computer

For more information on using the supplied software, start the application

and select the appropriate option from the Help menu.

Q If a memory card containing a large number of images is inserted, there may be a

delay before the software starts and you may be unable to import or save images.

Use a memory card reader to transfer pictures.

Q Make sure that the computer does not display a message stating that copying is in

progress and that the indicator lamp is out before turning the camera o or discon-

necting the USB cable (if the number of images copied is very large, the indicator

lamp may remain lit after the message has cleared from the computer display).

Failure to observe this precaution could result in loss of data or damage to internal

memory or the memory card.

Q Disconnect the camera before inserting or removing memory cards.

Q In some cases, it may not be possible to access pictures saved to a network server

using the supplied software in the same way as on a standalone computer.

Q The user bears all applicable fees charged by the phone company or Internet ser-

vice provider when using services that require an Internet connection.

62 Connections

Viewing Pictures on a Computer

Disconnecting the Camera

After con rming that the indicator lamp is out, follow the on-screen instructions to

turn the camera o and disconnect the USB cable.

Uninstalling the Supplied Software

Only uninstall the supplied software when it is no longer required or before begin-

ning reinstallation. After quitting the software and disconnecting the camera, drag

the “FinePixViewer” folder from “Applications” into the Trash and select Empty Trash

in the Finder menu (Macintosh), or open the control panel and use “Programs and

Features” (Windows7/Windows Vista) or “Add or Remove Programs” (WindowsXP) to

uninstall MyFinePix Studio. Under Windows, one or more con rmation dialogs may

be displayed; read the contents carefully before clicking OK.

63

Menus

Using the Menus: Shooting Mode

Using the Shooting Menu

To display the shooting menu, press MENU/OK in

shooting mode. Highlight items and press the se-

lector right to view options, then highlight an op-

tion and press MENU/OK. Press DISP/BACK to exit when

settings are complete. The options available vary with the shooting mode

selected.

Shooting Menu Options

A

SHOOTING MODE

(

defaults to

Q

)

Choose a shooting mode according to the type of subject (P 24).

64 Menus

Using the Menus: Shooting Mode

N

ISO

(

defaults to

AUTO)

Control the camera’s sensitivity to light. Higher values can reduce blur; note, however, that mot-

tling may appear in pictures taken at high sensitivities.

100

ISO

3200

Bright

Scene

Dark

Less noticeable

Noise (mottling)

More noticeable

Option

Description

AUTO

AUTO Sensitivity is adjusted automatically in response to shooting conditions.

3200 / 1600 / 800 / 400 /

200 / 100

Sensitivity is set to the speci ed value, which is shown in the display.

65Menus

Using the Menus: Shooting Mode

O

IMAGE SIZE

(

defaults to

O

4:3)

Choose the image size and aspect ratio at which pictures are record-

ed. Large pictures can be printed at large sizes with no drop in quality,

while small pictures require less memory, allowing more pictures to be

recorded.

O

4 : 3

Size Aspect ratio

Size Versus Aspect Ratio

Size

Option

Prints at sizes up to

O

34 × 25 cm (13.5 × 10 in.)

P

24 × 18 cm (9.5 × 7 in.)

Q

17

×

13

cm (7

×

5

in.)

Aspect ratio

4 : 3: Pictures have the same proportions as

the camera display.

16 : 9: Suited for display on High De nition

(HD) devices.

3

4

9

16

66 Menus

Using the Menus: Shooting Mode

T

IMAGE QUALITY

(

defaults to

N)

Choose how much image  les are compressed.

Option

Description

FINE

FINE Low compression. Select for higher image quality.

NORMAL

NORMAL High compression. Select this option to store more pictures.

P

FINEPIX COLOR

(

defaults to

c

)

Enhance contrast and color saturation or take pictures in black and white.

Option

Description

c

STANDARD

Standard contrast and saturation. Recommended in most situations.

a

CHROME

Vivid contrast and color. Choose for vivid shots of  owers or enhanced greens

and blues in landscapes.

b

B&W

Take pictures in black and white.

f

SEPIA

Take pictures in sepia.

R

Settings other than

c

STANDARD

are shown by an icon in the LCD monitor.

R

Depending on the subject, the e ects of

a

CHROME

may not be visible in the LCD monitor.

67Menus

Using the Menus: Shooting Mode

D

WHITE BALANCE

(

defaults to

AUTO)

For natural colors, choose a setting that matches the light source.

Option

Description

AUTO

AUTO White balance adjusted automatically.

i

For subjects in direct sunlight.

j

For subjects in the shade.

k

Use under “daylight”  uorescent lights.

l

Use under “warm white”  uorescent lights.

m

Use under “cool white”  uorescent lights.

n

Use under incandescent lighting.

R

Results vary with shooting conditions. Play pictures back after shooting to check colors in

the LCD monitor.

68 Menus

Using the Menus: Shooting Mode

R

CONTINUOUS

(

defaults to

OFF)

Capture motion in a series of pictures.

Option

Description

I

ON

The camera takes up to 3 pictures while the shutter button is pressed.

OFF

OFF One photograph is taken each time the shutter button is pressed.

R

Focus and exposure are determined by the  rst frame in each series.

R

The  ash turns o automatically. The previously selected  ash mode is restored when

OFF

is

selected for

R

CONTINUOUS

.

R

Frame rate varies with shutter speed.

R

The number of pictures that can be recorded depends on the memory available.

b

FACE DETECTION

Choose whether the camera automatically detects and sets focus and exposure for human por-

trait subjects (P 32).

69Menus

Using the Menus: Shooting Mode

F

AF MODE

This option controls how the camera selects the focus area. Regardless of the option selected,

the camera will focus on the subject in the center of the LCD monitor when macro mode is on.

Option

Description

r CENTER

The camera focuses on the subject in the center of the frame.

x TRACKING

Position the subject in the center focus area and press the selector left. Focus will

track the subject as it moves through the frame.

R

Note that in

x

mode, the camera focuses continuously, increasing the drain on the battery,

and that the sound of the camera focusing may be audible.

V

MOVIE QUALITY

(

defaults to

f

)

Choose a frame size for movies (P 48).

q

LED ILLUMINATOR

(

defaults to

OFF)

Choose whether the LED (P 2) lights to illuminate nearby subjects when lighting is poor.

Option

Description

ON

ON The LED lights during shooting.

OFF

OFF LED o .

R

The LED will not light when

ON

is selected for

o

SILENT MODE

in the setup menu (

P

81

).

R

Selecting

ON

increases the drain on the battery. Select

OFF

when the LED is not in use.

70 Menus

Using the Menus: Playback Mode

Using the Playback Menu

To display the playback menu, press MENU/OK in play-

back mode. Highlight items and press the selector

right to view options, then highlight an option and

press MENU/OK. Press DISP/BACK to exit when settings

are complete.

Playback Menu Options

k

PHOTOBOOK ASSIST

Create books from your favorite photos (P 45).

71Menus

Using the Menus: Playback Mode

R

PHOTO NAVIGATION

To show the direction and distance from your present position to the location where a picture

was taken:

1

Select an option other than OFF for R LOCATION SEARCH in the setup menu (P 82) and

con rm that the camera is receiving GPS data (

P 29).

2

Display a picture with a J icon.

3

Select R PHOTO NAVIGATION in the playback menu. The approxi-

mate direction and distance to the location where the picture was

taken are displayed as shown, using the units selected for R km/

mile in the setup menu (P 83). Distances over 1000 units are indicated

by “>”, those under 100 units by “<”.

NE

<100

m

NE

<100

m

100-0001

-

MINATO, TOKYO, JAPAN

R

Photo navigation ends when the next picture is displayed.

b

IMAGE SEARCH

Search for pictures (P 44).

A

ERASE

Delete all or selected pictures (P 43).

72 Menus

Using the Menus: Playback Mode

N

EDIT

Create a retouched copy of the current picture.

1

Display the desired picture.

2

Select

N

EDIT in the playback menu and choose from the following options:

Option

Description

CROP

CROP Crop the copy.

ASPECT RATIO

ASPECT RATIO Choose the aspect ratio.

BRIGHTNESS

BRIGHTNESS Adjust brightness.

CONTRAST

CONTRAST Adjust contrast.

COLOR

COLOR Choose positive values for “warmer” colors, negative values for “cooler” colors.

SEPIA

SEPIA Convert the copy to sepia or black and white.

FACE MOSAIC

If the original was taken with Intelligent Face Detection, a mosaic e ect can

be applied to up to four faces. If Intelligent Face Detection was o or no

faces were detected, the mosaic e ect will be applied to the center of the

image.

3

Press MENU/OK to create a retouched copy (in some cases, additional options will be displayed;

adjust settings as desired and press MENU/OK to save the copy).

R

Retouched copies can not be further retouched, cropped, or rotated.

R

Retouched copies are 640 × 480 pixels in size.

73Menus

Using the Menus: Playback Mode

j

MARK FOR UPLOAD TO

Select pictures for upload to YouTube or Facebook using MyFinePix Studio (Windows only).

■ Selecting Pictures for Upload

1

Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos and

movies for upload to Facebook.

2

Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press

DISP/BACK to exit when all the desired pictures are selected.

R

Only movies can be selected for upload to YouTube.

R

During playback, selected pictures are indicated by

j

YouTube

or

j

FACEBOOK

icons.

■ RESET ALL: Deselecting All Pictures

Choose RESET ALL to deselect all pictures. If the number of pictures a ected is very large, a

message will be displayed while the operation is in progress. Press DISP/BACK to exit before the

operation is complete.

■ Uploading Pictures (Windows Only)

Selected pictures can be uploaded using the YouTube/Facebook Upload option in MyFinePix

Studio.

Select with camera

Upload from computer

For information on installing MyFinePix Studio and connecting the camera to a computer, see

“Viewing Pictures on a Computer” (P 56).

74 Menus

Using the Menus: Playback Mode

I

SLIDE SHOW

View pictures in an automated slide show. Choose the type of show and press MENU/OK to start.

Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at

any time by pressing MENU/OK.

Option

Description

NORMAL

Press selector left or right to go back or skip ahead one frame. Select FADE-IN

for fade transitions between frames.

FADE-IN

NORMAL

g

As above, except that camera automatically zooms in on faces selected with

Intelligent Face detection.

FADE-IN

g

MULTIPLE

MULTIPLE Display several pictures at once.

SCRAP BOOK VIEW

SCRAP BOOK VIEW Display multiple pictures in random positions and sizes.

SELECT BGM

SELECT BGM Choose background music.

R

The camera will not turn o automatically while a slide show is in progress.

75Menus

Using the Menus: Playback Mode

B

RED EYE REMOVAL

If the current picture is marked with a g icon to indicate that it was taken with Intelligent Face

Detection, this option can be used to remove red-eye. The camera will analyze the image; if red-

eye is detected, the image will be processed to create a copy with reduced red-eye.

1

Display the desired picture.

2

Select B RED EYE REMOVAL in the playback menu.

3

Press MENU/OK.

R

Red eye may not be removed if the camera is unable to detect a face or the face is in pro le.

Results may di er depending on the scene. Red eye can not be removed from pictures that

have already been processed using red-eye removal or pictures created with other devices.

R

The amount of time needed to process the image varies with the number of faces detected.

R

Copies created with

B

RED EYE REMOVAL

are indicated by a

e

icon during playback.

D

PROTECT

Protect pictures from accidental deletion.

1

Select D PROTECT in the playback menu.

2

Highlight one of the following options and press MENU/OK:

• FRAME: Protect selected pictures. Press the selector left or right to view pictures and press

MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.

• SET ALL: Protect all pictures.

• RESET ALL: Remove protection from all pictures.

Q

Protected pictures will be deleted when the memory card or internal memory is formatted

(

(P

54).

76 Menus

Using the Menus: Playback Mode

G

CROP

Create a cropped copy of the current picture.

1

Display the desired picture.

2

Select G CROP in the playback menu.

3

Use the zoom control to zoom in and out and use the selector to scroll the picture until the

desired portion is displayed.

4

Press MENU/OK to display a con rmation dialog.

5

Press MENU/OK again to save the cropped copy to a separate  le.

R

Larger crops produce larger copies; all copies have an aspect ratio of 4 : 3. If the size of the  nal

copy will be

a

,

YES

will be displayed in yellow.

O

RESIZE

Create a small copy of the current picture.

1

Display the desired picture.

2

Select O RESIZE in the playback menu.

3

Highlight a size and press MENU/OK to display a con rmation dialog.

4

Press MENU/OK to save the resized copy to a separate  le.

R

The sizes available vary with the size of the original image.

77Menus

Using the Menus: Playback Mode

C

IMAGE ROTATE

Rotate pictures taken in tall orientation so that they are displayed in tall orientation in the LCD

monitor.

1

Display the desired picture.

2

Select C IMAGE ROTATE in the playback menu.

3

Press the selector down to rotate the picture 90 ° clockwise, up to rotate it 90 ° counterclock-

wise.

4

Press MENU/OK. The picture automatically be displayed in the selected orientation whenever

it is played back on the camera.

R

Protected pictures can not be rotated. Remove protection before rotating pictures (

Protected pictures can not be rotated. Remove protection before rotating pictures (P 75

).

R

The camera may not be able to rotate pictures created with other devices.

E

COPY

Copy pictures from internal memory to a memory card.

1

Select E COPY in the playback menu.

2

Highlight one of the following options and press the selector right:

• a INTERNAL MEMORY y b CARD: Copy pictures from internal memory to a memory card.

• b CARD y a INTERNAL MEMORY: Copy pictures from a memory card to internal memory.

3

Highlight one of the following options and press MENU/OK:

• FRAME: Copy selected pictures. Press the selector left or right to view pictures and press

MENU/OK to copy the current picture.

• ALL FRAMES: Copy all pictures.

R

Copying ends when the destination is full.

R

DPOF print information is not copied (

DPOF print information is not copied (P 54

).

78 Menus

Using the Menus: Playback Mode

S

TRANSITION

(

defaults to

OFF)

Choose the transition between images during playback.

Option

Description

WIPE

WIPE Choose for a wipe transition between images.

SLIDE-IN

SLIDE-IN Images slide into the display.

FADE-IN

FADE-IN The next image fades in as the previous image fades out.

OFF

OFF No transition between frames.

L

MOVIE TRIMMING

Remove opening or ending footage to create an edited copy of the current movie.

1

Display the desired movie.

2

Select L MOVIE TRIMMING in the playback menu. To remove footage from the start of the

copy, proceed to Step 3; otherwise, proceed to Step 4.

3

Press the selector down to begin playback and press it down again when the new opening

frame is reached.

4

Press MENU/OK. To remove footage from the end of the copy, proceed to Step 5; otherwise,

proceed to Step 6 (to exit without creating an edited copy, press DISP/BACK).

5

Press the selector down to begin playback and press it down again when the new closing

frame is reached.

6

Press MENU/OK to save the copy.

79Menus

Using the Menus: Playback Mode

MOVIE JOIN

Add existing footage to the end of the current movie to create an edited copy.

1

Display the desired movie.

2

Select MOVIE JOIN in the playback menu.

3

Press the selector left or right to highlight a movie.

4

Press MENU/OK to add the highlighted footage to the end of the current movie and save the

resulting copy, or press DISP/BACK to exit without creating a copy.

R

Both movies must have been recorded at the same frame size and frame rate and have a

combined  le size of no more than 2GB.

K

PRINT ORDER (DPOF)

Select pictures for printing on DPOF- and PictBridge-compatible devices (P 52).

80 Menus

The Setup Menu

Using the Setup Menu

1

Display the setup menu.

1.1 Press MENU/OK to display the menu for the cur-

rent mode.

1.2 Press the selector left to highlight the tab for

the current menu.

EXIT

SET

SET-UP

SET

tab

1.3 Press the selector down to highlight X.

1.4 Press the selector right to place the cursor in the setup menu.

2

Adjust settings.

Highlight items and press the selector right to view options, then highlight

an option and press MENU/OK. Press DISP/BACK to exit when settings are

complete.

81Menus

The Setup Menu

Setup Menu Options

F

DATE/TIME

Set the camera clock (P 18).

N

TIME DIFFERENCE

(

defaults to

h

)

Switch the camera clock instantly from your home time zone to the local time at your destina-

tion when traveling. To specify the di erence between local time and your home time zone:

1

Highlight g LOCAL and press the selector right.

2

Use the selector to choose the time di erence between local time and your home time zone

in increments of 15 minutes.

3

Press MENU/OK.

To switch between local time and your home time zone, highlight g LOCAL or h HOME and

press MENU/OK.

Option

Description

h

HOME

HOME Switch to the time currently selected for F DATE/TIME (see above).

g

LOCAL

Switch to local time. If this option is selected, g and the time and date will be

displayed in yellow for three seconds each time the camera is turned on.

L

a

(

defaults to

ENGLISH)

Choose a language (P 109).

o

SILENT MODE

(

defaults to

OFF)

Select ON to disable the speaker,  ash, and LED illuminator in situations in which camera sounds

or lights may be unwelcome (note that the  ash will still  re in C mode).

82 Menus

The Setup Menu

R

RESET

Reset all settings except F DATE/TIME, N TIME DIFFERENCE, and Q VIDEO SYSTEM to de-

fault values.

1

Highlight R RESET and press the selector right to display a con rmation dialog.

2

Highlight OK and press MENU/OK.

K

FORMAT

If a memory card is inserted in the camera, this option will format the memory card. If no mem-

ory card is inserted, this option will format internal memory. Select OK to begin formatting.

Q

All data—including protected pictures—will be deleted from the memory card or internal

memory. Be sure important  les have been copied to a computer or other storage device.

Q

Do not open the battery cover during formatting.

R

LOCATION SEARCH

(

defaults to

OFF)

Turn the GPS receiver on or o (

P 29).

Option

Description

T

PERMANENTLY ON

The camera updates GPS data even when o .

U

WHEN SWITCHED ON

The camera updates GPS data while on.

OFF

OFF GPS receiver o .

83Menus

The Setup Menu

R

TRACKING DATA

(

defaults to

OFF)

Select ON to record GPS data to a log  le on the memory card (P 29; be sure the clock is set to

the correct time and date as described on page 18). A new log  le is created when ON is selected

and once every 24 hours thereafter. Note that the camera will continue to update GPS data even

when o , increasing the drain on the battery. Choose OFF to disable GPS tracking.

Q

GPS logs can be viewed in MyFinePix Studio.

Q

See “GPS” (

P

31) for information on using GPS.

Q

The indicator lamp glows orange during recording GPS data even when the camera is turned

o while

ON

is selected. Select

OFF

before removing the battery or memory card. Failure to

observe this precaution could damage the card.

Q

Signal strength will be displayed in yellow and GPS data will not be logged if the battery is

low (

B

or less), no memory card is inserted, or the memory card has less than 32 MB free.

To resume the log, select

ON

after inserting a charged battery or a memory card with more

than 32 MB free.

Q

GPS tracking may be interrupted during movie recording and playback.

R

LOCATION INFO

(

defaults to

ON)

Select ON to display GPS data.

R

km/mile

Choose the units used for GPS information from km (m) (kilometers and meters), mi (ft) (miles

and feet), or mi (yd) (miles and yards).

84 Menus

The Setup Menu

A

IMAGE DISP.

(

defaults to

1.5 SEC)

Choose how long pictures are displayed in the LCD monitor after shooting.

Option

Description

3 SEC

Pictures are displayed for three seconds (3 SEC) or 1.5 seconds (1.5 SEC).

Colors may di er slightly from those in the  nal image.

1.5 SEC

ZOOM (CONTINUOUS)

ZOOM (CONTINUOUS) Pictures are displayed until the MENU/OK button is pressed.

OFF

OFF Pictures are not displayed after shooting.

R

OFF

has no e ect in continuous shooting mode.

B

FRAME NO.

(

defaults to

CONT.)

New pictures are stored in image  les named using a four-digit  le

number assigned by adding one to the last  le number used. The  le

number is displayed during playback as shown at right. B FRAME NO.

controls whether  le numbering is reset to 0001 when a new memory

card is inserted or the current memory card or internal memory is for-

matted.

Directory

number

File

number

Frame number

100-0001

Option

Description

CONTINUOUS

Numbering continues from the last  le number used or the  rst available  le num-

ber, whichever is higher. Choose this option to reduce the number of pictures

with duplicate  le names.

RENEW

Numbering is reset to 0001 after formatting or when a new memory card is in-

serted.

R

If the frame number reaches 999-9999, the shutter release will be disabled (

If the frame number reaches 999-9999, the shutter release will be disabled (P

101).

R

Selecting

R

RESET

(

(P

82) sets

B

FRAME NO.

to

CONTINUOUS

but does not reset the  le

number.

R

Frame numbers for pictures taken with other cameras may di er.

85Menus

The Setup Menu

G

OPERATION VOL.

(

defaults to

c

)

Adjust the volume of the sounds produced when camera controls are operated. Choose f

(mute) to disable control sounds.

H

SHUTTER VOLUME

(

defaults to

c

)

Adjust the volume of the sounds produced when the shutter is released. Choose f (mute)

to disable the shutter sound.

e

SOUND

(

defaults to

i

)

Choose the sounds used for the shutter, at startup, and for camera controls.

I

PLAYBACK VOLUME

(

defaults to

7)

Adjust the volume for movie playback.

J

LCD BRIGHTNESS

(

defaults to

AUTO)

Control the brightness of the display.

Option

Description

AUTO

Display brightness is automatically adjusted during shooting in response to ambi-

ent lighting conditions. Brightness is not adjusted during playback.

MANUAL

Press the selector up or down to adjust brightness and then press MENU/OK.

Choose from values between –5 and +5.

86 Menus

The Setup Menu

E

LCD MODE

(

defaults to

U

ON)

Choose whether the display automatically dims to save power in shooting mode. This option

does not take e ect during playback.

Option

Description

U

POWER SAVE ON

The display dims to save power if no operations are performed for a few

seconds. Normal brightness can be restored by pressing the shutter but-

ton halfway.

Q

POWER SAVE OFF

Automatic dimming o .

M

AUTO POWER OFF

(

defaults to

2 MIN)

Choose the length of time before the camera turns o automatically when no operations are

performed. Shorter times increase battery life; if OFF is selected, the camera must be turned

o manually. Note that in some situations the camera turns o automatically even when OFF

is selected.

L

DUAL IS MODE

(

defaults to

l

)

Choose whether image stabilization is performed at all times when the camera is in shooting

mode (l CONTINUOUS), or only when the shutter button is pressed halfway (m SHOOT-

ING ONLY). Choose OFF to turn image stabilization o when using a tripod.

B

RED EYE REMOVAL

(

defaults to

ON)

Choose ON to remove red-eye e ects caused by the  ash when shooting with Intelligent Face

Detection.

R

Red-eye reduction is performed only when a face is detected.

87Menus

The Setup Menu

D

DIGITAL ZOOM

(

defaults to

OFF)

If ON is selected, selecting T at the maximum optical zoom position will trigger digital zoom,

further magnifying the image.

The Zoom Indicator

DIGITAL ZOOM

on

WT

Optical zoom Digital zoom

DIGITAL ZOOM

o

WT

Optical zoom

Q

Digital zoom produces lower quality images than optical zoom.

n

SAVE ORG IMAGE

(

defaults to

OFF)

Select ON to save unprocessed copies of pictures taken with red-eye removal.

c

GUIDANCE DISPLAY

(

defaults to

ON)

Choose whether to display tool tips.

88 Menus

The Setup Menu

Q

VIDEO SYSTEM

(

defaults to

NTSC)

Choose a video mode for connection to a TV. SECAM is not supported.

Option

Description

NTSC

Select this mode for connection to video devices in North America, the Carib-

bean, parts of Latin America, and some East Asian countries.

PAL

Select this mode for connection to video devices in the United Kingdom and

much of Europe, Australia, New Zealand, and parts of Asia and Africa.

89

Technical Notes

Optional Accessories

The camera supports a wide range of accessories from FUJIFILM and other

manufacturers.

† SDXC cards not supported.

USB cable (supplied)

SD card slot or card reader

A/V cable (optional)

Computer

*

TV

*

HDTV

*

■

Computer Related

■

Printing

Printer

*

PictBridge-compatible

printer

*

USB cable

■

Audio/Visual

HDMI cable

(supplied)

(sold separately)

HDP-L1

HD player

†

SD/SDHC/SDXC

memory card

FINEPIX XP30 Series

DIGITAL CAMERA

* Available separately.

90 Technical Notes

Optional Accessories

Accessories from FUJIFILM

The following optional accessories are available from FUJIFILM. For the lat-

est information on the accessories available in your region, check with your

local FUJIFILM representative or visit http://www.fujifilm.com/products/digital_

cameras/index.html.

Rechargeable

Li-ion batteries

NP-45A: Additional large-capacity NP-45A rechargeable

batteries can be purchased as required.

Battery

chargers

BC-45W: Replacement battery chargers can be purchased

as required. The BC-45W charges an NP-45A battery in

about 120 minutes at +20 °C (+68 °F).

A/V cable

AV-C1

AV-C1: Use for viewing pictures on TV.

HD players

HDP-L1 (requires HDMI cable, available from third-party suppliers): Con-

nect to a High De nition (HD) TV to view photographs

and movies from SD/SDHC memory cards.

91Technical Notes

Caring for the Camera

To ensure continued enjoyment of the product, observe the following pre-

cautions.

Storage and Use

If the camera will not be used for an

extended period, remove the battery

and memory card. Do not store or

use the camera in locations that are:

• exposed to rain, steam, or smoke

• very humid or extremely dusty

• exposed to direct sunlight or very

high temperatures, such as in a

closed vehicle on a sunny day

• extremely cold

• subject to strong vibration

• exposed to strong magnetic  elds,

such as near a broadcasting anten-

na, power line, radar emitter, motor,

transformer, or magnet

• in contact with volatile chemicals

such as pesticides

• next to rubber or vinyl products

■ Condensation

Sudden increases in temperature,

such as occur when entering a heated

building on a cold day, can cause con-

densation inside the camera. If this

occurs, turn the camera o and wait

an hour before turning it on again. If

condensation forms on the memory

card, remove the card and wait for the

condensation to dissipate.

92 Technical Notes

Caring for the Camera

Cleaning

Use a blower to remove dust from the protective glass covering the lens and

LCD monitor, then gently wipe with a soft, dry cloth. Any remaining stains can

be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to

which a small amount of lens-cleaning  uid has been applied. Care should

be taken to avoid scratching the protective glass or LCD monitor. The camera

body can be cleaned with a soft, dry cloth. Do not use alcohol, thinner, or

other volatile chemicals.

Traveling

Keep the camera in your carry-on baggage. Checked baggage may su er

violent shocks that could damage the camera.

93

Troubleshooting

Problems and Solutions

Water in the Camera

Problem

Solution

Water in the camera

The battery-chamber cover was not fully closed before the camera was immersed, or was opened

under water: Take the camera to a FUJIFILM-authorized service technician for repairs. Do not turn

the camera on.

Power and Battery

Problem

Solution

The camera does not

turn on.

•

The battery is exhausted

: Charge the battery or insert a fully-charged spare battery (

P

7).

•

The battery is inserted incorrectly

: Reinsert in the correct orientation (

P

10).

•

The battery-chamber cover is not latched

: Latch the battery-chamber cover (

P

10).

The battery runs down

quickly.

•

The battery is cold

: Warm the battery by placing it in a pocket or other warm place and reinsert

it in the camera immediately before taking a picture.

•

There is dirt on the battery terminals

: Clean the terminals with a soft, dry cloth.

•

Q

is selected for shooting mode

: Select

B

mode to reduce the drain on the battery

(

P

24).

•

x

TRACKING

is selected for

F

AF MODE

: Select a di erent AF mode (

P

69).

•

The battery has been charged many times

: The battery has reached the end of its charging

life. Purchase a new battery.

•

T

PERMANENTLY ON

is selected for

R

LOCATION SEARCH

: Select

U

WHEN

SWITCHED ON

or

OFF

(

P

82).

•

R

TRACKING DATA

is on

: Turn

R

TRACKING DATA

o (

P

83).

94 Troubleshooting

Problems and Solutions

Problem

Solution

The camera turns o

suddenly.

Charge the battery or insert a fully-charged spare battery (

P

7).

Charging does not start.

Reinsert the battery in the correct orientation and make sure that the charger is plugged in (

P

7).

Charging is slow.

Charge the battery at room temperature (

P

vi).

The charging lamp lights,

but the battery does not

charge.

•

There is dirt on the battery terminals

: Clean the terminals with a soft, dry cloth.

•

The battery has been charged many times

: The battery has reached the end of its charg-

ing life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.

Menus and Displays

Problem

Solution

Menus and displays are

not in English.

Select

ENGLISH

for

L

a

(

P

18, 81).

Shooting

Problem

Solution

No picture is taken when

the shutter button is

pressed.

•

Memory is full

: Insert a new memory card or delete pictures (

P

11, 43).

•

Memory is not formatted

: Format the memory card or internal memory (

P

82).

•

There is dirt on the memory card contacts

: Clean the contacts with a soft, dry cloth.

•

The memory card is damaged

: Insert a new memory card (

P

11).

•

The battery is exhausted

: Charge the battery or insert a fully-charged spare battery (

P

7).

•

The camera has turned o automatically

: Turn the camera on (

P

16).

•

The indicator lamp was orange when you attempted to record a panorama

: Wait until

the indicator lamps turns o (

P

3).

95Troubleshooting

Problems and Solutions

Problem

Solution

The LCD monitor goes

dark after shooting.

The LCD monitor may darken while the  ash charges. Wait for the  ash to charge (

P

37).

The camera does not

focus.

•

The subject is close to the camera

: Select macro mode (

P

36).

•

The subject is far away from the camera

: Cancel macro mode (

P

36).

•

The subject is not suited to autofocus

: Use focus lock (

P

33).

Macro mode is not

available

Choose a di erent shooting mode (

P

24).

GPS

The camera is slow to acquire GPS data: Some time may be needed to acquire GPS data immedi-

ately after the camera or

R

LOCATION SEARCH

is turned on or if the camera has been

unable to acquire GPS data for an extended period.

Intelligent Face Detection

is not available.

Choose a di erent shooting mode (

P

24).

No face is detected.

•

The subject’s face is obscured by sunglasses, a hat, long hair, or other objects

: Remove

the obstructions.

•

The subject’s face occupies only a small area of the frame

: Change the composition so that

the subject’s face occupies a larger area of the frame (

P

33).

•

The subject’s head is tilted or horizontal

: Ask the subject to hold their head straight.

•

The camera is tilted

: Keep the camera level (

P

20).

•

The subject’s face is poorly lit

: Shoot in bright light.

Wrong subject is

selected.

The selected subject is closer to the center of the frame than the main subject. Recompose the

picture or turn face detection o and frame the picture using focus lock (

P

33).

96 Troubleshooting

Problems and Solutions

Problem

Solution

The  ash does not  re.

•

The  ash is not available in the current shooting mode

: Choose a di erent shooting mode

(

P

24).

•

The battery is exhausted

: Charge the battery or insert a fully-charged spare battery (

P

7).

•

The camera is in continuous mode

: Select

OFF

for

R

CONTINUOUS

(

P

68).

•

The camera is in silent mode

: Turn silent mode o (

P

81).

•

The  ash is o (

P

)

: Choose a di erent  ash mode (

P

37).

Some  ash modes are

not available.

•

The desired  ash mode is not available in the current shooting mode

: Choose a di erent

shooting mode (

P

24).

•

The camera is in silent mode

: Turn silent mode o (

P

81).

The  ash does not fully

light the subject.

•

The subject is not in range of the  ash

: Position the subject in range of the  ash (

P

109).

•

The  ash window is obstructed

: Hold the camera correctly (

P

20).

Pictures are blurred.

•

The protective glass covering the lens is dirty

: Clean the glass (

P

92).

•

The protective glass covering the lens is blocked

: Keep objects away from the lens (

P

20).

•

s

is displayed during shooting and the focus frame is displayed in red

: Check focus

before shooting (

P

99).

•

k

is displayed during shooting

: Use the  ash or a tripod (

P

38).

Pictures are mottled.

This is normal when slow shutter speeds are selected at high temperatures and does not indicate

a malfunction.

Vertical lines appear in

pictures.

The camera has been used continuously at high temperatures. Turn the camera o and wait for

it to cool down.

97Troubleshooting

Problems and Solutions

Problem

Solution

“Smear” in the form of

vertical purple or white

lines appears in the

display.

Vertical purple or white lines may appear after the camera has been used continuously at high

temperatures or when a very bright object is in the frame; this phenomenon is common to all CCD

image sensors and does not indicate a malfunction. These lines are recorded in movies but do not

appear in photographs. Avoid framing bright objects when  lming movies.

Sounds made by the

camera are recorded with

movies.

Do not adjust zoom during shooting.

Playback

Problem

Solution

Pictures are grainy.

The pictures were taken with a di erent make or model of camera.

Playback zoom is unavail-

able.

The current picture is a resized copy with a size of

a

.

No sound in movie

playback.

•

Playback volume is too low

: Adjust playback volume (

P

85).

•

The microphone was obstructed

: Hold the camera correctly during recording (

P

20, 48).

•

The speaker is obstructed

: Hold the camera correctly during playback (

P

50).

Selected pictures are not

deleted.

Some of the pictures selected for deletion are protected. Remove protection using the device with

which it was originally applied (

P

75).

File numbering is

unexpectedly reset.

The battery-chamber cover was opened while the camera was on. Turn the camera o before

opening the battery-chamber cover (

P

16).

98 Troubleshooting

Problems and Solutions

Connections/Miscellaneous

Problem

Solution

No picture or sound.

•

The camera is not properly connected

: Connect the camera properly (

P

51).

•

An A/V cable was connected during movie playback

: Connect the camera once movie play-

back has ended.

•

Input on the television is set to “TV”

: Set input to “VIDEO”.

•

The camera is not set to the correct video standard

: Match the camera

Q

VIDEO SYS-

TEM

setting to the TV (

P

88).

•

The volume on the TV is too low

: Adjust the volume.

No color

Match the camera

Q

VIDEO SYSTEM

setting to the TV (

P

88).

The computer does not

recognize the camera.

Be sure the camera and computer are correctly connected (

P

60).

Pictures can not be

printed.

•

The camera is not properly connected

: Connect the camera correctly (

P

52).

•

The printer is o

: Turn the printer on.

Only one copy is printed/

the date is not printed.

The printer is not PictBridge compatible.

The camera is unre-

sponsive.

•

Temporary camera malfunction

: Remove and reinsert the battery (

P

9).

•

The battery is exhausted

: Charge the battery (

P

7) or insert a fully-charged spare battery

(

P

9).

The camera does not

function as expected.

Remove and reinsert the battery (

P

9). If the problem persists, contact your FUJIFILM dealer.

No sound.

Turn silent mode o (

P

81).

99Troubleshooting

Warning Messages and Displays

The following warnings are displayed in the LCD monitor:

Warning

Description

B

(

red

)

Low battery. Charge the battery (

P

7) or insert a fully-charged spare battery (

P

9).

A

(

blinks red

)

Battery exhausted. Charge the battery (

P

7) or insert a fully-charged spare battery (

P

9).

k

Slow shutter speed. Pictures may be blurred; use the  ash or a tripod.

s

(

displayed in red with red

focus frame

)

The camera can not focus. Try one of the following solutions:

•

Use focus lock to focus on another subject at the same distance, then recompose the picture

(

P

33).

•

Use macro mode to focus when taking close-ups (

P

36).

r

The subject is too bright or too dark and the picture will be over- or under-exposed. If the subject

is dark, use the  ash (

P

37).

Aperture or shutter speed

displayed in red

FOCUS ERROR

Camera malfunction. Turn the camera o and then on again, taking care not to touch the lens. If

the message persists, contact a FUJIFILM dealer.

TURN OFF THE CAMERA

AND TURN ON AGAIN

CARD NOT INITIALIZED

•

The memory card or internal memory is not formatted or the memory card was for-

matted in a computer or other device

: Format the memory card or internal memory using

the

K

FORMAT

option in the camera setup menu (

P

82).

•

The memory card contacts require cleaning

: Clean the contacts with a soft, dry cloth. If

the message is repeated, format the card (

P

82). If the message persists, replace the card.

•

Camera malfunction

: Contact a FUJIFILM dealer.

PROTECTED CARD

The memory card is locked. Unlock the card (

P

11).

BUSY

The memory card is incorrectly formatted. Use the camera to format the card (

P

82).

100 Troubleshooting

Warning Messages and Displays

Warning

Description

CARD ERROR

The memory card is not formatted for use in the camera. Format the card (

P

82).

The memory card contacts require cleaning or the memory card is damaged. Clean the contacts

with a soft, dry cloth. If the message is repeated, format the card (

P

82). If the message persists,

replace the card.

Incompatible memory card. Use a compatible card (

P

14).

Camera malfunction. Contact a FUJIFILM dealer.

a

MEMORY FULL

The memory card or internal memory is full and pictures can not be recorded or copied. Delete

pictures or insert a memory card with more free space.

b

MEMORY FULL

INTERNAL MEMORY IS

FULL

INSERT A NEW CARD

WRITE ERROR

•

Memory card error or connection error

: Reinsert the card or turn the camera o and then

on again. If the message persists, contact a FUJIFILM dealer.

•

Not enough memory remaining to record additional pictures

: Delete pictures or insert

a memory card with more free space.

•

The memory card or internal memory is not formatted

: Format the memory card or

internal memory (

P

82).

READ ERROR

•

The  le is corrupt or was not created with the camera

: The  le can not be viewed.

•

The memory card contacts require cleaning

: Clean the contacts with a soft, dry cloth. If

the message is repeated, format the card (

P

82). If the message persists, replace the card.

•

Camera malfunction

: Contact a FUJIFILM dealer.

101Troubleshooting

Warning Messages and Displays

Warning

Description

FRAME NO. FULL

The camera has run out of frame numbers (current frame number is 999-9999). Format the

memory card and select

RENEW

for

B

FRAME NO.

in the setup menu. Take a picture

to reset frame numbering to 100-0001, then select

CONTINUOUS

for

B

FRAME NO

(

P

84)

.

PRESS AND HOLD

THE DISP BUTTON TO

DEACTIVATE SILENT MODE

An attempt was made to choose a  ash mode or adjust the volume with the camera in silent

mode. Exit silent mode before choosing a  ash mode or adjusting the volume (

P

81).

TOO MANY FRAMES

A search has returned more than 5,000 results, or more than 999 frames were selected for dele-

tion. Perform a di erent search or select fewer pictures.

PROTECTED FRAME

An attempt was made to delete to a protected picture. Remove protection and try again (

P

75).

a

CAN NOT CROP

a

pictures can not be cropped.

CAN NOT CROP

The picture is damaged or was not created with the camera.

P

CANNOT EXECUTE

An attempt was made to create a resized copy at a size equal to or larger than the original.

Choose a smaller size.

Q

CANNOT EXECUTE

a

CANNOT EXECUTE

CAN NOT ROTATE

An attempt was made to rotate a picture that can not be rotated.

F

CAN NOT ROTATE

Movies can not be rotated.

CANNOT EXECUTE

Retouch and red-eye removal are not available with movies, pictures taken with other cameras,

or pictures that can not be played back.

F

CANNOT EXECUTE

102 Troubleshooting

Warning Messages and Displays

Warning

Description

NO CARD

No memory card inserted when

E

COPY

is selected in the playback menu. Insert a memory

card.

b

NO IMAGE

The source selected for

E

COPY

contains no images. Select a di erent source.

a

NO IMAGE

DPOF FILE ERROR

The DPOF print order on the current memory card contains more than 999 images. Copy the

pictures to internal memory and create a new print order.

CAN NOT SET DPOF

The picture can not be printed using DPOF.

F

CAN NOT SET DPOF

Movies can not be printed using DPOF.

COMMUNICATION ERROR

A connection error occurred while pictures were being printed or copied to a computer or other

device. Con rm that the device is turned on and that the USB cable is connected.

PRINTER ERROR

Printer out of paper or ink, or other printer error. Check printer (see printer manual for details).

To resume printing, turn the printer o and then turn it back on.

PRINTER ERROR

RESUME?

Printer out of paper or ink, or other printer error.

Check printer (see printer manual for details). If

printing does not resume automatically, press

MENU/OK

to resume.

CANNOT BE PRINTED

An attempt was made to print a movie, a picture not created with the camera, or a picture in a

format not supported by the printer. Movies and some pictures created with other devices can

not be printed; if the picture is a still picture created with the camera, check the printer manual

to con rm that the printer supports the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures

can not be printed.

103

Appendix

Tips and Tricks

The following tips and tricks will help you get the most from your camera.

Battery Performance

Choose the following settings for improved battery performance:

• b FACE DETECTION (P 68): OFF

• F AF MODE (P 69): r CENTER

• q LED ILLUMINATOR (P 69): OFF

• R LOCATION SEARCH (P 83): OFF

• R TRACKING DATA (P 83): OFF

• E LCD MODE (P 86): U POWER SAVE ON

• L DUAL IS MODE (P 86): OFF

The Self-timer

• To prevent blur caused by the camera moving when the shutter button is pressed,

use the two-second timer.

• To take a group portrait that includes the photographer, use the group timer. The timer

will not start until the person who has pressed the shutter button appears in the

frame.

104 Appendix

Tips and Tricks

Intelligent Face Detection

When ON is selected for b FACE DETECTION (P 68), you can:

ShootingShooting

• Zoom in on faces when ZOOM (CONTINUOUS) is selected for A IM-

AGE DISP. (P 84).

• Remove red-eye by selecting ON for B RED EYE REMOVAL (P 86).

PlaybackPlayback

• Zoom in on faces during slide shows (P 74) or by pressing the selector

down during playback.

• Search for faces using b IMAGE SEARCH (P 44).

• Crop the background from portraits using G CROP (P 76).

PrintingPrinting

• Print one copy for each person in the photo.

105Appendix

Tips and Tricks

Pro Tips

• To photograph the same scene both with and without the

 ash, select C NATURAL & N for A SHOOTING MODE

(P 24). Use multi-frame playback (P 42) to compare the two

shots.

• To photograph subjects that are in motion, select x TRACK-

ING for F AF MODE (P 69).

• To photograph poorly-lit subjects close to the camera, select

ON for q LED ILLUMINATOR (

P 69

).

• To  ne-tune brightness of a photograph, select P PROGRAM

AE (P 24) for A SHOOTING MODE, choose an appropriate

white balance option (P 67), and adjust exposure compensa-

tion (P 35).

106 Appendix

Internal Memory/Memory Card Capacity

The following table shows the recording time or number of pictures available

at di erent image sizes. All  gures are approximate;  le size varies with the

scene recorded, producing wide variations in the number of  les that can be

stored. The number of exposures or length remaining may not diminish at an

even rate. A limited number of test pictures can be taken when no memory

card is inserted.

Medium

O

Internal memory

(approx. 10 MB)

2 GB

4 GB

8 GB

T

FINE

NORMAL

FINE

NORMAL

FINE

NORMAL

FINE

NORMAL

Photographs

O

4:3

1

2

320

550

640

1100

1290

2210

O

16:9

2

3

410

780

830

1570

1680

3160

P

4:3

3

5

630

1100

1260

2200

2540

4420

P

16:9

3

7

820

1540

1640

3090

3290

6200

Q

4:3

6

11

1420

2350

2860

4710

5740

9450

Q

16:9

9

13

2070

2830

4150

5680

8330

11400

Movies

*

h

1280

†

1 sec.

11 min.

24 min.

48 min.

f

6 sec.

28 min.

58 min.

116 min.

* Individual movie  les can not exceed 2 GB in size.

† Use a G card or better when shooting HD movies.

107Appendix

Speci cations

System

Model

Digital Camera FinePix XP30 Series

E ective pixels

14.2 million

CCD



/



-in. square pixel CCD with primary color  lter

Storage media

• Internal memory

(approx. 10 MB)

• SD/SDHC/SDXC memory cards

File system

Compliant with

D

esign Rule for

C

amera

F

ile System

(DCF)

, Exif 2.3, and

D

igital

P

rint

O

rder

F

ormat

(DPOF)

File format

•

Still pictures

: Exif 2.3 JPEG

(compressed)

•

Movies

: AVI-format Motion JPEG

Image size

(pixels)

•

O

4 : 3

: 4,320 × 3,240

•

O

16 : 9

: 4,320 × 2,432

•

P

4 : 3

: 3,072 × 2,304

•

P

16 : 9

: 3,072 × 1,728

•

Q

4 : 3

: 2,048 × 1,536

•

Q

16 : 9

: 1,920 × 1,080

Lens

Fujinon 5 × optical zoom lens, F3.9

(wide angle)

– F4.9

(telephoto)

Focal length

f=5.0 mm–25.0 mm

(35-mm format equivalent: 28 mm–140 mm)

Digital zoom

•

4 : 3

: Approx. 6.8 ×

(up to 34 × when combined with optical zoom)

•

16 : 9

: Approx. 5.1 ×

(up to 25 × when combined with optical zoom)

Aperture

F3.9/F6.2

(wide angle),

F4.9/F8.0

(telephoto)

Focus range

(distance from front of lens)

Approx. 60 cm (2.0 ft.)–in nity

(wide angle)

; 1.0 m (3.3 ft.)–in nity

(telephoto)

•

Macro

: approx. 9 cm–80 cm/3.5 in.–2.6 ft.

(wide angle)

; 40 cm–80 cm/1.3 ft.–2.6 ft.

(telephoto)

108 Appendix

Speci cations

System

Sensitivity

Standard output sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 3200; AUTO

Metering

256-segment

t

hrough-

t

he-

l

ens

(TTL)

Exposure control

Programmed AE

Exposure compensation

–2 EV – +2 EV in increments of



/



EV

Image stabilization

Optical stabilization

Shutter speed

(combined mechanical and

electronic shutter)

•

AUTO mode

:



/



s–



/



s

•

Other modes

: 4 s–



/



s

Continuous

Up to 0.8 fps, max. 3 frames

Focus

•

Mode

: Single AF

•

Focus-area selection

: CENTER, TRACKING

•

Autofocus system

: Contrast-detect TTL AF

White balance

Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight  uores-

cent, warm white  uorescent, cool white  uorescent, and incandescent

109Appendix

Speci cations

System

Self-timer

O , 2 sec., 10 sec.,

a

(

COUPLE TIMER

),

g

(

GROUP TIMER

)

Flash

Auto  ash; e ective range when sensitivity is set to

AUTO

is approx. 70 cm–3.1 m/2.3 ft.–

10.2 ft.

(wide angle)

, 70 cm–2.7 m/2.3 ft.–8.9 ft.

(telephoto)

; e ective range in macro mode is

approx. 30 cm–80 cm/1.0 ft.–2.6 ft.

Flash mode

Auto,  ll  ash, o , slow sync

(red-eye removal o )

; auto with red-eye removal,  ll  ash with red-

eye removal, o , slow sync with red-eye removal

(red-eye removal on)

LCD monitor

2.7-in., 230 k-dot color LCD monitor; frame coverage approx. 96 %

Movies

Frame size

h

1280

(1,280 × 720) or

f

(640 × 480); 30 fps; monaural sound

Languages

Arabic, Bulgarian, Simpli ed Chinese, Traditional Chinese, Czech, Danish, Dutch, English, Farsi,

Finnish, French, German, Greek, Hebrew, Hungarian, Indonesian, Italian, Japanese, Kazakh,

Korean, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, Serbian,

Slovak, Spanish, Swedish, Thai, Turkish, Ukrainian, Vietnamese

Date map database was

created

October 2010

Input/output terminals

A/V OUT

(audio/video output)

NTSC or PAL output with monaural sound

Digital input/output

USB 2.0 High-Speed; shares A/V OUT connector, MTP/PTP

110 Appendix

Speci cations

Power supply/other

Power supply

NP-45A rechargeable battery

Battery life

(approximate

number of frames that can

be taken with a fully-charged

battery)

Battery type

Approximate number of frames

NP-45A (type supplied with camera)

200

CIPA standard, measured in

B

(auto)

mode using battery supplied with camera and SD mem-

ory card.

Note

: Number of shots that can be taken with battery varies with battery charge level and will

decline at low temperatures.

Camera dimensions

(W × H × D)

99.2 mm × 67.7 mm × 23.1 mm/3.9 in. × 2.7 in. ×

0.9

in., excluding projections

Camera weight

Approx. 148 g/5.2 oz., excluding battery, accessories, and memory card

Shooting weight

Approx. 165 g/5.8 oz., including battery and memory card

Operating conditions

•

Temperature

: –10 °C – +40 °C/+14 °F – +104 °F

•

Humidity

: 10% – 80%

(no condensation)

111Appendix

Speci cations

NP-45A rechargeable battery

Nominal voltage

DC 3.7 V

Nominal capacity

720 mAh

Operating temperature

0 °C – +40 °C/+32 °F – +104 °F

Dimensions

(W × H × D)

31.0 mm × 39.6 mm × 6.0 mm/1.2 in. × 1.6 in. × 0.2 in.

Weight

Approx. 15.5 g/0.5 oz.

BC-45B battery charger

Rated input

100 V–240 V AC, 50/60 Hz

Input capacity

6.0 V (100 V/240 VA)

Rated output

4.2 V DC, 550 mA

Supported batteries

NP-45A rechargeable batteries

Charging time

Approx. 120 minutes

(+20 °C/+68 °F)

Operating temperature

0 °C – +40 °C/+32 °F – +104 °F

Dimensions

(W × H × D)

46 mm × 91 mm × 23 mm/1.8 in. × 3.6 in. × 0.9 in., excluding projections

Weight

Approx. 65 g/2.3 oz., excluding battery

Weight and dimensions vary with the country or region of sale.

112 Appendix

Speci cations

■

Notices

• Speci cations subject to change without notice. FUJIFILM shall not be held liable for

damages resulting from errors in this manual.

• Although the LCD monitor is manufactured using advanced high-precision technol-

ogy, small bright points and anomalous colors may appear, particularly in the vicinity

of text. This is normal for this type of LCD monitor and does not indicate a malfunc-

tion; images recorded with the camera are una ected.

• Digital cameras may malfunction when exposed to strong radio interference (e.g.,

electric  elds, static electricity, or line noise).

• Due to the type of lens used, some distortion may occur at the periphery of images.

This is normal.

113

Memo

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN

http://www.fujifilm.com/products/digital_cameras/index.html

Restrictions on Camera Settings

The options available in each shooting mode are listed below.

Shooting Mode

Option

Q

B

P

C

D

L

Z

M

r

N

O

H

Q

R

S

F

t

s

U

V

W

F

N

B

OFF

AUTO

✔

1

N

✔

1

✔

O

✔

B

ON

K

✔

1

L

✔

1

✔

M

✔

P

✔

1

✔

1

✔

1

✔

1

✔

h

S

/

R

✔

a

/

g

✔

F

✔

1

✔

1

✔

1

H

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

d

✔

N

AUTO

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

3200

✔

1600

✔

800

✔

400

✔

200

✔

100

✔

O

✔

P

✔

Q

✔

T

✔

1

✔

Restrictions on Camera Settings

Shooting Mode

Option

Q

B

P

C

D

L

Z

M

r

N

O

H

Q

R

S

F

t

s

U

V

W

F

P

c

✔

a

✔

b

✔

f

✔

D

✔

R

ON

✔

OFF

✔

b

ON

✔

OFF

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

F

r

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

✔

1

x

✔

V

h

1280

✔

f

✔

q

✔

L

l

✔

m

✔

OFF

✔

D

✔

2

✔

M

✔

B

✔

R

✔

E

✔

1 Automatically optimized for selected shooting mode.

2 OFF only.

Fuji Finepix XP 30 series Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Fuji Finepix XP 30 series

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info

Fuji Finepix XP 30 series Handleiding

Hulp nodig? Stel uw vraag in het forum

Forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Fuji Finepix XP 30 series

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info