478038
72
Verklein
Vergroot
Pagina terug
1/146
Pagina verder
DIGITAL CAMERA
FINEPIX HS30EXR
Owners Manual
Thank you for your purchase of this
product. This manual describes how
to use your FUJIFILM digital camera and
the supplied software. Be sure that you
have read and understood its contents
and the warnings in “For Your Safety
(P ii) before using the camera.
For information on related products, visit our website at
http://www.fujifilm.com/products/digital_cameras/index.html
Before You Begin
First Steps
Basic Photography and Playback
More on Photography
More on Playback
Movies
Connections
Menus
Technical Notes
Troubleshooting
Appendix
BL01656-201
EN
ii
Read Instructions: All the safety and
operating instructions should be
read before the appliance is oper-
ated.
Retain Instructions: The safety and
operating instructions should be
retained for future reference.
Heed Warnings: All warnings on the
appliance and in the operating in-
structions should be adhered to.
Follow Instructions: All operating
and use instructions should be fol-
lowed.
Installation
Installation
Power Sources: This video product
should be operated only from the
type of power source indicated on
the marking label. If you are not sure
of the type of power supply to your
home, consult your appliance dealer
or local power company. For video
products intended to operate from
battery power, or other sources, refer
to the operating instructions.
Grounding or Polarization: This video
product is equipped with a polar-
ized alternating-current line plug (a
plug having one blade wider than
the other). This plug will fit into the
power outlet only one way. This is a
safety feature. If you are unable to in-
sert the plug fully into the outlet, try
reversing the plug. If the plug should
still fail to fit, contact your electrician
to replace your obsolete outlet. Do
not defeat the safety purpose of the
polarized plug.
Alternate Warnings: This video
product is equipped with a 3-wire
grounding-type plug, a plug having
a third (grounding) pin. This plug will
only fit into a grounding-type power
outlet. This is a safety feature. If you
are unable to insert the plug into
the outlet, contact your electrician
to replace your obsolete outlet. Do
not defeat the safety purpose of the
grounding-type plug.
Overloading: Do not overload wall
outlets and extension cords as this
can result in a risk of fire or electric
shock.
Ventilation: Slots and openings in the
cabinet are provided for ventilation
and to ensure reliable operation of
the video product and to protect it
from overheating, and these open-
ings must not be blocked or cov-
ered.
The openings should never be
blocked by placing the video prod-
uct on a bed, sofa, rug, or other simi-
lar surface.
This video product should not be
placed in a built-in installation such
as a bookcase or rack unless proper
ventilation is provided or the manu-
facturer’s instructions have been
adhered to.
This video product should never be
placed near or over a radiator or heat
register.
Attachments: Do not use attach-
ments not recommended by the
video product manufacturer as they
may cause hazards.
Water and Moisture: Do not use this
video product near water – for ex-
ample, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool,
and the like.
Power-Cord Protection: Power-Supply
cords should be routed so that
they are not likely to be walked on
or pinched by items placed upon
or against them, paying particular
attention to cords at plugs, conve-
nience receptacles, and the point
where they exit from the appliance.
Accessories: Do not place this video
product on an unstable cart, stand,
tripod, bracket, or table. The video
product may fall, causing serious in-
jury to a child or adult, and serious
damage to the appliance. Use only
with a cart, stand, tripod, bracket, or
table recommended by the manu-
facturer, or sold with the video prod-
uct. Any mounting of the appliance
should follow the manufacturer’s in-
structions, and should use a mount-
ing accessory recommended by the
manufacturer.
An appliance
and cart com-
bination should
be moved with
care. Quick stops,
excessive force,
and uneven sur-
faces may cause the appliance and
cart combination to overturn.
Antennas
Antennas
Outdoor Antenna Grounding:
If an
outside antenna or cable system is
connected to the video product, be
sure the antenna or cable system is
grounded so as to provide some pro-
tection against voltage surges and
built-up static charges. Section 810
of the National Electrical Code, ANSI/
NFPA No. 70, provides information
with respect to proper grounding
of the mast and supporting struc-
ture, grounding of the lead-in wire
to an antenna-discharge unit, size of
grounding conductors, location of
antenna-discharge unit, connection
to grounding electrodes, and require-
ments for the grounding electrode.
IMPORTANT SAFETY INSTRUCTIONS
For Your Safety
iii
For Your Safety
Power Lines: An outside antenna sys-
tem should not be located in the
vicinity of overhead power lines or
other electric light or power circuits,
or where it can fall into such power
lines or circuits. When installing an
outside antenna system, extreme
care should be taken to keep from
touching such power lines or circuits
as contact with them might be fatal.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
Antenna
Lead in Wire
Ground Clamp
Power Service
Grounding Electrode
System (NEC ART 250.
PART H)
Electric
Service
Equipment
Ground
Clamps
Antenna
Discharge Unit
(NEC SECTION
810-20)
Grounding
Conductors
(NEC SECTION
810-21)
Use
Use
Cleaning: Unplug this video product
from the wall outlet before clean-
ing. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth
for cleaning.
Object and Liquid Entry: Never push
objects of any kind into this video
product through openings as they
may touch dangerous voltage
points or short out parts that could
result in a fire or electric shock. Never
spill liquid of any kind on the video
product.
Lightning: For added protection for
this video product receiver during
a lightning storm, or when it is left
unattended and unused for long pe-
riods of time, unplug it from the wall
outlet and disconnect the antenna
or cable system. This will prevent
damage to the video product due
to lightning and power-line surges.
Service
Service
Servicing: Do not attempt to service
this video product yourself as open-
ing or removing covers may expose
you to dangerous voltage or other
hazards. Refer all servicing to quali-
fied service personnel.
Damage Requiring Service: Unplug this
video product from the wall outlet
and refer servicing to qualified ser-
vice personnel under the following
conditions:
When the power-supply cord or
plug is damaged.
If liquid has been spilled, or objects
have fallen into the video product.
If the video product has been ex-
posed to rain or water.
If the video product has been
dropped or the cabinet has been
damaged.
If the video product does not op-
erate normally be following the
operating instructions. Adjust only
those controls that are covered by
the operating instructions as an im-
proper adjustment of other controls
may result in damage and will often
require extensive work by a qualified
technician to restore the video prod-
uct to its normal operation.
When the video product exhibits a
distinct change in performance - this
indicates a need for service.
Replacement Parts: When replace-
ment parts are required, be sure
the service technician has used
replacement parts specified by the
manufacturer or have the same
characteristics as the original part.
Unauthorized substitutions may
result in fire, electric shock or other
hazards.
Safety Check: Upon completion of any
service or repairs to this video prod-
uct, ask the service technician to
perform safety checks to determine
that the video product is in proper
operating condition.
iv
For Your Safety
Be sure to read this notes before using
Safety Notes
Make sure that you use your camera correctly. Read these Safety Notes and
your Owner’s Manual carefully before use.
After reading these Safety Notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the severity of
the injury or damage that can result if the information indicated by the icon
is ignored and the product is used incorrectly as a result.
WARNING
This icon indicates that death or serious injury can result if the infor-
mation is ignored.
CAUTION
This icon indicates that personal injury or material damage can result
if the information is ignored.
The icons shown below are used to indicate the nature of the information
which is to be observed.
Triangular icons tell you that this information requires attention (“im-
portant”).
Circular icons with a diagonal bar tell you that the action indicated is
prohibited (“Prohibited”).
Filled circles with an exclamation mark tell you an action that must be
performed (“Required”).
WARNING
WARNING
Unplug
from power
socket.
If a problem arises, turn the camera off, remove the battery, disconnect and
unplug the AC power adapter.
Continued use of the camera when it is emitting smoke, is emitting
any unusual odor, or is in any other abnormal state can cause a fire
or electric shock.
• Contact your FUJIFILM dealer.
WARNING
WARNING
Avoid
exposure to
water
Do not allow water or foreign objects to enter the camera.
If water or foreign objects get inside the camera, turn the camera
off, remove the battery and disconnect and unplug the AC power
adapter.
Continued use of the camera can cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Do not use in
the bathroom
or shower.
Do not use the camera in the bathroom or shower.
This can cause a fire or electric shock.
Do not disas-
semble
Never attempt to disassemble or modify (never open the case).
Failure to observe this precaution can cause fire or electric shock.
Do not touch
internal
parts
Should the case break open as the result of a fall or other accident, do not touch
the exposed parts.
Failure to observe this precaution could result in electric shock or in
injury from touching the damaged parts. Remove the battery im-
mediately, taking care to avoid injury or electric shock, and take the
product to the point of purchase for consultation.
Do not change, heat or unduly twist or pull the connection cord and do not
place heavy objects on the connection cord.
These actions could damage the cord and cause a fire or electric
shock.
• If the cord is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface.
This can cause the camera to fall or tip over and cause injury.
Never attempt to take pictures while in motion.
Do not use the camera while you are walking or driving a vehicle. This
can result in you falling down or being involved in a traffic accident.
Do not touch any metal parts of the camera during a thunderstorm.
This can cause an electric shock due to induced current from the
lightning discharge.
Do not use the battery except as specified.
Load the battery as aligned with the indicator.
v
For Your Safety
WARNING
WARNING
Do not heat, change or take apart the battery. Do not drop or subject the bat-
tery to impacts. Do not store the battery with metallic products. Do not use
chargers other than the specified model to charge the battery.
Any of these actions can cause the battery to burst or leak and cause
fire or injury as a result.
Use only the battery or AC power adapters specified for use with this camera.
Do not use voltages other than the power supply voltage shown.
The use of other power sources can cause a fire.
If the battery leaks and fluid gets in contact with your eyes, skin or clothing.
Flush the affected area with clean water and seek medical attention or call an
emergency number right away.
Do not use the charger to charge batteries other than those specified here.
The Ni-MH battery charger is designed for FUJIFILM HR-AA Ni-MH
batteries. Using the charger to charge conventional batteries or other
types of rechargeable batteries can cause the battery to leak fluid,
overheat or burst.
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
Do not use in the presence of flammable objects, explosive gases, or dust.
When carrying the battery, install it in a digital camera or keep it in the hard
case. When storing the battery, keep it in the hard case. When discarding,
cover the battery terminals with insulation tape.
Contact with other metallic objects or battery could cause the bat-
tery to ignite or burst.
Keep Memory Cards out of the reach of small children.
Because Memory Cards are small, they can be swallowed by children.
Be sure to store Memory Cards out of the reach of small children. If
a child swallows a Memory Card, seek medical attention or call an
emergency number.
CAUTION
CAUTION
Do not use this camera in locations affected by oil fumes, steam, humidity or dust.
This can cause a fire or electric shock.
Do not leave this camera in places subject to extremely high temperatures.
Do not leave the camera in locations such as a sealed vehicle or in
direct sunlight. This can cause a fire.
CAUTION
CAUTION
Keep out of the reach of small children.
This product could cause injury in the hands of a child.
Do not place heavy objects on the camera.
This can cause the heavy object to tip over or fall and cause injury.
Do not move the camera while the AC power adapter is still connected. Do not
pull on the connection cord to disconnect the AC power adapter.
This can damage the power cord or cables and cause a fire or electric
shock.
Do not use the AC power adapter when the plug is damaged or the plug socket
connection is loose.
This could cause a fire or electric shock.
Do not cover or wrap the camera or the AC power adapter in a cloth or blanket.
This can cause heat to build up and distort the casing or cause a fire.
When you are cleaning the camera or you do not plan to use the camera for
an extended period, remove the battery and disconnect and unplug the AC
power adapter.
Failure to do so can cause a fire or electric shock.
When charging ends, unplug the charger from the power socket.
Leaving the charger plugged into the power socket can cause a fire.
Using a flash too close to a person’s eyes may temporarily affect the eyesight.
Take particular care when photographing infants and young children.
When a memory card is removed, the card could come out of the slot too quick-
ly. Use your finger to hold it and gently release the card.
Request regular internal testing and cleaning for your camera.
Build-up of dust in your camera can cause a fire or electric shock.
Contact your FUJIFILM dealer to request internal cleaning every 2
years.
• Please note this is not a free of charge service.
Remove your fingers from the flash window before the flash fires.
Failure to observe this precaution could result in burns.
Keep the flash window clean and do not use the flash if the window is ob-
structed.
Failure to observe these precautions could cause smoke or discolor-
ation.
vi
For Your Safety
Power Supply and Battery
* Confirm your battery type before read-
ing the following descriptions.
The following explains proper use of
batteries and how to prolong their
life. Incorrect use of batteries can
cause shorter battery life, as well as
leakage, excessive heat, fire or explo-
sion.
1
Camera uses the Rechargeable
Lithium-ion Battery
* When shipped, the battery is not
fully charged. Always charge the
battery before using it.
* When carrying the battery, install it
in a digital camera or keep it in the
soft case.
Battery Features
The battery gradually loses its
charge even when not used. Use
a battery that has been charged
recently (in the last day or two) to
take pictures.
To maximize the life of the battery,
turn the camera off as quickly as
possible when it is not being used.
The number of available frames
will be lower in cold locations or
at low temperatures. Take along
a spare fully charged battery. You
can also increase the amount of
power produced by putting the
battery in your pocket or another
warm place to heat it and then
loading it into the camera just be-
fore you take a picture.
If you are using a heating pad, take
care not to place the battery di-
rectly against the pad. The camera
may not operate if you use a de-
pleted battery in cold conditions.
Charging the Battery
• You can charge the battery using
the battery charger (included).
- The battery can be charged
at ambient temperatures be-
tween 0°C and +40°C (+32°F
and +104°F). Refer to the Owner’s
Manual for the time of charging
battery.
- You should charge the battery
at an ambient temperature be-
tween +10°C and +35°C (+50°F
and +95°F). If you charge the
battery at a temperature outside
this range, charging takes longer
because the performance of the
battery is impaired.
- You cannot charge the battery
at temperatures of 0°C (+32°F) or
below.
The Rechargeable Lithium-ion Bat-
tery does not need to be fully dis-
charged or exhausted flat before
being charged.
The battery may feel warm after it
has been charged or immediately
after being used. This is perfectly
normal.
Do not recharge a fully charged
battery.
Battery Life
At normal temperatures, the bat-
tery can be used at least 300 times.
If the time for which the battery
provides power shortens markedly,
this indicates that the battery has
reached the end of its effective life
and should be replaced.
Notes on storage
If a battery is stored for long
periods while charged, the per-
formance of the battery can be
impaired. If the battery will not be
used for some time, run the battery
out before storing it.
If you do not intend to use the
camera for a long period of time,
remove the battery from the cam-
era.
Store the battery in a cool place.
- The battery should be stored in
a dry location with an ambient
temperature between +15°C and
+25°C (+59°F and +77°F).
- Do not leave the battery in hot or
extremely cold places.
Handling the Battery
Cautions for Your Safety:
Do not carry or store battery with
metal objects such as necklaces or
hairpins.
Do not heat the battery or throw it
into a fire.
Do not attempt to take apart or
change the battery.
• Do not recharge the battery with
chargers other those specified.
Dispose of used battery promptly.
Do not drop the battery or other-
wise subject it to strong impacts.
Do not expose the battery to wa-
ter.
Always keep the battery terminals
clean.
Do not store batteries in hot plac-
es. Also, if you use the battery for
a long period, the camera body
and the battery itself will become
warm. This is normal. Use the AC
power adapter if you are taking
pictures or viewing images for a
long period of time.
2
Camera uses AA-size alkaline or Ni-MH
(nickel-metal hydride) rechargeable
batteries
* For details on the batteries that
you can use, refer to the Owner’s
Manual of your camera.
Cautions for Using Battery
Do not heat the batteries or throw
them into a fire.
• Do not carry or store batteries with
metal objects such as necklaces or
hairpins.
Do not expose the batteries to
water, and keep batteries from get-
ting wet or stored in moist loca-
tions.
Do not attempt to take apart or
change the batteries, including
battery casings.
Do not subject the batteries to
strong impacts.
vii
For Your Safety
Do not use batteries that are leak-
ing, deformed, discolored.
Do not store batteries in warm or
humid places.
Keep the batteries out of reach of
babies and small children.
Make sure that the battery polarity
(C and D) is correct.
Do not use new with used batter-
ies. Do not use charged and dis-
charged batteries together.
Do not use different types or
brands of batteries at the same
time.
If you do not intend to use the
camera for a long period of time,
remove the batteries from the
camera. Note if the camera is left
with the batteries removed, the
time and date settings are cleared.
The batteries feel warm right after
being used. Before removing the
batteries, turn the camera off and
wait for the batteries to cool down.
Since batteries do not work well in
cold weather or locations, warm
the batteries by placing them in-
side your garments before use.
Batteries do not work well when
cold. They will work again when
the temperature returns to normal.
Soil (such as fingerprints) on the
battery terminals makes the bat-
teries charge less reducing the
number of images. Carefully wipe
the battery terminals with a soft
dry cloth before loading.
If any liquid at all leaks from
the batteries, wipe the battery
compartment thoroughly and
then load new batteries.
If any battery fluid comes into
contact with your hands or
clothing, flush the area thor-
oughly with water. Note that
battery fluid can cause loss
of eyesight if it gets into your
eyes. If this occurs, do not rub
your eyes. Flush the fluid out
with clean water and contact
your physician for treatment.
Using the AA-size Ni-MH batteries
correctly
Ni-MH batteries left unused in
storage for long periods can be-
come “deactivated”. Also, repeat-
edly charging Ni-MH batteries
that are only partially discharged
can cause them to suffer from the
“memory effect”. Ni-MH batteries
that are “deactivated” or affected
by “memory” suffer from the prob-
lem of only providing power for a
short time after being charged. To
prevent this problem, discharge
and recharge them several times
using the camera’s “Discharging
rechargeable batteries” function.
Deactivation and memory are spe-
cific to Ni-MH batteries and are not
in fact battery faults.
See Owner’s Manual for the proce-
dure for “Discharging rechargeable
batteries”.
CAUTION
CAUTION
Do not use the “Discharging re-
chargeable batteries” function when
alkaline batteries being used.
To charge Ni-MH batteries, use the
quick battery charger (sold sepa-
rately). Refer to the instructions
supplied with the charger to make
sure that the charger is used cor-
rectly.
Do not use the battery charger to
charge other batteries.
Note that the batteries feel warm
after being charged.
Due to the way the camera is con-
structed, a small amount of current
is used even when the camera is
turned off. Note in particular that
leaving Ni-MH batteries in the
camera for a long period will over-
discharge the batteries and may
render them unusable even after
recharging.
Ni-MH batteries will self-discharge
even when not used, and the time
for which they can be used may be
shortened as a result.
Ni-MH batteries will deteriorate
rapidly if over-discharged (e.g.
by discharging the batteries in a
flashlight). Use the “Discharging re-
chargeable batteries” function pro-
vided in the camera to discharge
the batteries.
Ni-MH batteries have a limited
service life. If a battery can only
be used for a short time even after
repeated discharge-charge cycles,
it may have reached the end of its
service life.
Disposing of Batteries
When disposing of batteries, do
so in accordance with your local
waste disposal regulations.
3
Notes on both models (
1
,
2
)
AC Power Adapter
Always use the AC Power Adapter
with the camera. The use of an AC
Power adapter other than FUJIFILM
AC Power Adapter can be damaged
to your digital camera.
For details on the AC power adapter,
refer to the Owner’s Manual of your
camera.
• Use the AC power adapter for in-
door use only.
Plug the connection cord plug se-
curely into the DC input terminal.
Turn off the FUJIFILM Digital cam-
era before disconnecting the cord
from the DC input terminal. To dis-
connect, pull out the plug gently.
Do not pull on the cord.
Do not use the AC power adapter
with any device other than your
camera.
During use, the AC power adapter
will become hot to the touch. This
is normal.
viii
For Your Safety
• Do not take apart the AC power
adapter. Doing so could be dan-
gerous.
Do not use the AC power adapter
in a hot and humid place.
Do not subject the AC power
adapter to strong shocks.
The AC power adapter may emit a
humming. This is normal.
If used near a radio, the AC power
adapter may cause static. If this
happens, move the camera away
from the radio.
Before Using the Camera
Do not aim the camera at extremely
bright light sources, such as the sun
in a cloudless sky. Failure to observe
this precaution could damage the
camera image sensor.
Test Shots Prior to Photography
For important photographs (such as
weddings and overseas trips), always
take a test shot and view the im-
age to make sure that the camera is
working normally.
FUJIFILM Corporation cannot ac-
cept liability for any incidental
losses (such as the costs of photog-
raphy or the loss of income from
photography) incurred as a result
of faults with this product.
Notes on Copyright
Images recorded using your digital
camera system cannot be used in
ways that infringe copyright laws
without the consent of the owner,
unless intended only for personal
use. Note that some restrictions ap-
ply to the photographing of stage
performances, entertainments and
exhibits, even when intended purely
for personal use. Users are also asked
to note that the transfer of Memory
Card containing images or data pro-
tected under copyright laws is only
permissible within the restrictions
imposed by those copyright laws.
Handling Your Digital Camera
To ensure that images are recorded
correctly, do not subject the camera
to impact or shock while an image is
being recorded.
Liquid Crystal
If the LCD monitor is damaged, take
particular care with the liquid crystal
in the monitor. If any of the follow-
ing situations arise, take the urgent
action indicated.
• If liquid crystal comes in contact
with your skin:
Wipe the area with a cloth and
then wash thoroughly with soap
and running water.
If liquid crystal gets into your eye:
Flush the affected eye with clean
water for at least 15 minutes and
then seek medical assistance.
If liquid crystal is swallowed:
Flush your mouth thoroughly with
water. Drink large quantities of wa-
ter and induce vomiting. Then seek
medical assistance.
Although the LCD panel is produced
with highly sophisticated technolo-
gies, there may be black spots or
permanently lit spots. This is not a
malfunction, and does not affect re-
corded images.
Trademark Information
xD-Picture Card and E are trade-
marks of FUJIFILM Corporation. The
typefaces included herein are solely
developed by DynaComware Tai-
wan Inc. Macintosh, QuickTime, and
Mac OS are trademarks of Apple Inc.
in the U.S.A. and other countries.
Windows 7, Windows Vista, and the
Windows logo are trademarks of
the Microsoft group of companies.
Adobe and Adobe Reader are either
trademarks or registered trademarks
of Adobe Systems Incorporated in
the U.S.A. and/or other countries.
The SDHC and SDXC logos are trade-
marks of SD-3C, LLC. The HDMI logo
is a trademark. YouTube is a trade-
mark of Google Inc. All other trade
names mentioned in this manual are
the trademarks or registered trade-
marks of their respective owners.
Notes on Electrical Interference
If the camera is to be used in hos-
pitals or aircrafts, please note that
this camera may cause interference
to other equipment in the hospital
or aircraft. For details, please check
with the applicable regulations.
Explanation of Color Television
System
NTSC: National Television System
Committee, color television
telecasting specifications
adopted mainly in the U.S.A.,
Canada and Japan.
PAL: Phase Alternation by Line, a
color television system ad-
opted mainly by European
countries and China.
Exif Print (Exif ver. 2.3)
Exif Print Format is a newly revised
digital camera file format that con-
tains a variety of shooting informa-
tion for optimal printing.
IMPORTANT NOTICE: Read Before
Using the Software
Direct or indirect export, in whole or
in part, of licensed software without
the permission of the applicable
governing bodies is prohibited.
ix
For Your Safety
NOTICES
NOTICES
To prevent fire or shock hazard, do not expose the unit
to rain or moisture.
Please read the “Safety Notes” and make sure you un-
derstand them before using the camera.
Perchlorate Material—special handling may apply. See
http://www.dtsc.ca.gov/hazardouswaste/perchlorate.
For Customers in the U. S. A.
For Customers in the U. S. A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement: This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful in-
terference, and (2) this device must accept any interfer-
ence received, including interference that may cause
undesired operation.
CAUTION: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV techni-
cian for help.
You are cautioned that any changes or modifications
not expressly approved in this manual could void the
user’s authority to operate the equipment.
Notes on the Grant: To comply with Part 15 of the FCC
Rules, this product must be used with a Fujifilm-spec-
ified ferrite-core A/V cable, USB cable, and DC supply
cord.
For Customers in Canada
For Customers in Canada
CAUTION: This Class B digital apparatus complies with
Canadian ICES-003.
Disposal of Electrical and Electronic Equipment in Private
Disposal of Electrical and Electronic Equipment in Private
Households
Households
In the European Union, Norway, Iceland and Liech-
tenstein: This symbol on the product, or in
the manual and in the warranty, and/or on
its packaging indicates that this product
shall not be treated as household waste.
Instead it should be taken to an applicable
collection point for the recycling of electri-
cal and electronic equipment.
By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences to
the environment and human health, which could oth-
erwise be caused by inappropriate waste handling of
this product.
This symbol on the batteries or accumula-
tors indicates that those batteries shall not
be treated as household waste.
If your equipment contains easy removable batteries or
accumulators please dispose these separately accord-
ing to your local requirements.
The recycling of materials will help to conserve natural
resources. For more detailed information about recy-
cling this product, please contact your local city office,
your household waste disposal service or the shop
where you purchased the product.
In Countries Outside the European Union, Norway, Iceland and
Liechtenstein: If you wish to discard this product, includ-
ing the batteries or accumulators, please contact your
local authorities and ask for the correct way of disposal.
x
About This Manual
Before using the camera, read this manual and the warnings on pages ii–ix. For information on specific
topics, consult the sources below.
Memory Cards
Pictures can be stored in the camera’s internal memory or on optional SD, SDHC, and SDXC memory cards (P 14),
referred to in this manual as “memory cards”.
Warning Messages and Displays
Warning Messages and Displays
.....................
.....................
P
P
116
116
Find out whats behind that flashing icon or error
message in the display.
Troubleshooting
Troubleshooting
............................................
............................................
P
P
110
110
Having a specific problem with the camera?
Find the answer here.
Table of Contents
Table of Contents
..............................................
..............................................
P
P
xi
xi
The “Table of Contents” gives an overview of the
entire manual. The principal camera operations
are listed here.
xi
For Your Safety ................................................................................. ii
IMPORTANT SAFETY INSTRUCTIONS ...................................... ii
Safety Notes ....................................................................................iv
About This Manual .......................................................................... x
Before You Begin
Before You Begin
Introduction ....................................................................................... 1
Symbols and Conventions .......................................................... 1
Supplied Accessories ....................................................................1
Parts of the Camera ....................................................................... 2
Camera Displays .......................................................................... 5
First Steps
First Steps
Attaching Accessories ................................................................... 8
The Strap......................................................................................... 8
The Lens Cap ................................................................................. 8
The Lens Hood ............................................................................. 8
Charging the Battery ..................................................................... 9
Inserting the Battery ....................................................................10
Inserting a Memory Card ........................................................... 12
Turning the Camera on and Off ..............................................15
Basic Setup .......................................................................................16
Basic Photography and Playback
Basic Photography and Playback
Taking Pictures in R (E AUTO) Mode ...................... 17
Viewing Pictures ............................................................................21
More on Photography
More on Photography
Shooting Mode ...............................................................................22
O (E AUTO/E Priority) ..................................23
B AUTO ..........................................................................................24
Adv. ADVANCED ...........................................................................24
SP1/SP2: SCENE POSITION .......................................................28
r MOTION PANORAMA 360 .................................................30
P: PROGRAM AE ............................................................................32
S: SHUTTER PRIORITY AE ...........................................................33
A: APERTURE PRIORITY AE ........................................................33
M: MANUAL ....................................................................................34
C: CUSTOM MODE ........................................................................35
Focus Lock.........................................................................................36
The AE/AF LOCK Button.....................................................................37
Locking Exposure ......................................................................37
Locking Focus .............................................................................37
F Macro and Super Macro Modes (Close-ups) ................ 38
N Using the Flash (Super-Intelligent Flash) .......................39
J Using the Self-Timer ............................................................... 41
I Continuous Shooting (Burst Mode) ................................ 42
d Exposure Compensation .....................................................46
Metering ............................................................................................47
Focus Mode ......................................................................................48
Autofocus Mode ............................................................................. 50
Sensitivity .........................................................................................51
White Balance..................................................................................52
The Fn Button .................................................................................. 53
b Intelligent Face Detection ..................................................54
Table of Contents
xii
Table of Contents
n Face Recognition ....................................................................55
Adding New Faces .......................................................................55
Viewing, Editing, and Deleting Existing Data ...................56
Adding Faces Automatically ....................................................56
More on Playback
More on Playback
Playback Options ...........................................................................58
Continuous Shooting .................................................................58
I Favorites: Rating Pictures ....................................................58
Playback Zoom ..............................................................................59
Multi-Frame Playback .................................................................60
A Deleting Pictures ....................................................................61
Viewing Photo Information ......................................................62
Image Search ...................................................................................63
X PhotoBook Assist ...................................................................64
Creating a PhotoBook ................................................................64
Viewing PhotoBooks ..................................................................65
Editing and Deleting PhotoBooks .........................................65
Viewing Panoramas ...................................................................... 66
Movies
Movies
Recording Movies .......................................................................... 67
Movie Frame Size .........................................................................68
a Viewing Movies ........................................................................69
Connections
Connections
Viewing Pictures on TV ...............................................................70
Printing Pictures via USB ............................................................72
Connecting the Camera ............................................................72
Printing Selected Pictures ........................................................72
Printing the DPOF Print Order .................................................73
Creating a DPOF Print Order ....................................................75
Viewing Pictures on a Computer ............................................78
Windows: Installing MyFinePix Studio .................................78
Macintosh: Installing FinePixViewer .....................................80
Connecting the Camera ............................................................82
xiii
Table of Contents
Menus
Menus
Using the Menus: Shooting Mode .........................................84
Using the Shooting Menu .........................................................84
Shooting Menu Options ............................................................84
A E MODE ..........................................................................84
A Adv. MODE ..............................................................................84
A
SCENE POSITION
.....................................................................8 4
N ISO ...............................................................................................84
O IMAGE SIZE ...............................................................................85
T IMAGE QUALITY .....................................................................85
U DYNAMIC RANGE ..................................................................86
P FILM SIMULATION .................................................................86
d WB SHIFT ..................................................................................87
f COLOR ........................................................................................87
e TONE ..........................................................................................87
q SHARPNESS ..............................................................................87
h NOISE REDUCTION................................................................87
y INTELLIGENT SHARPNESS ..................................................87
R INTELLIGENT DIGITAL ZOOM ............................................87
Z ADVANCED ANTI BLUR ........................................................88
b FACE DETECTION ...................................................................88
n FACE RECOGNITION ..............................................................88
W MOVIE MODE ..........................................................................88
a STILL SHOOTING IN MOVIE ................................................88
J AE BKT EV STEPS ....................................................................89
I FLASH .........................................................................................89
g EXTERNAL FLASH ..................................................................89
K CUSTOM SET ............................................................................90
2 ELECTRONIC LEVEL...............................................................90
Using the Menus: Playback Mode .......................................... 91
Using the Playback Menu..........................................................91
Playback Menu Options .............................................................91
X PHOTOBOOK ASSIST ............................................................91
x ERASE .........................................................................................91
j MARK FOR UPLOAD TO .......................................................92
I SLIDE SHOW ............................................................................93
B RED EYE REMOVAL ................................................................93
D PROTECT ...................................................................................94
G CROP ..........................................................................................94
O RESIZE ........................................................................................95
C IMAGE ROTATE ........................................................................95
E COPY ...........................................................................................96
F VOICE MEMO ...........................................................................96
n ERASE FACE RECOG. .............................................................97
K PRINT ORDER (DPOF) ...........................................................97
J DISP. ASPECT ...........................................................................97
The Setup Menu .............................................................................98
Using the Setup Menu................................................................98
Setup Menu Options ...................................................................99
F DATE/TIME ...............................................................................99
N TIME DIFFERENCE ..................................................................99
L a .................................................................................99
o SILENT MODE ..........................................................................99
R RESET ...................................................................................... 100
K FORMAT ................................................................................. 100
A IMAGE DISP. .......................................................................... 100
B FRAME NO. .............................................................................101
G OPERATION VOL. .................................................................101
xiv
Table of Contents
H SHUTTER VOLUME ..............................................................101
e SHUTTER SOUND.................................................................101
I PLAYBACK VOLUME ............................................................102
J LCD BRIGHTNESS .................................................................102
T MONITOR SUNLIGHT MODE............................................102
E EVF/LCD MODE.....................................................................102
M AUTO POWER OFF ...............................................................102
1 QUICK START MODE ...........................................................102
F Fn BUTTON .............................................................................102
L DUAL IS MODE ..................................................................... 103
B RED EYE REMOVAL ............................................................. 103
C AF ILLUMINATOR ................................................................ 103
k AE/AF-LOCK MODE ............................................................ 104
v AE/AF-LOCK BUTTON ....................................................... 104
j RAW ......................................................................................... 104
j FOCUS CHECK ...................................................................... 105
t SAVE ORG IMAGE ................................................................ 105
m AUTOROTATE PB ................................................................. 105
O BACKGROUND COLOR ...................................................... 105
c GUIDANCE DISPLAY ........................................................... 105
Q VIDEO SYSTEM ..................................................................... 106
S CUSTOM RESET ................................................................... 106
U DATE STAMP ......................................................................... 106
Technical Notes
Technical Notes
Optional Accessories ..................................................................107
Accessories from FUJIFILM .................................................... 108
Caring for the Camera .............................................................. 109
Troubleshooting
Troubleshooting
Problems and Solutions ...........................................................110
Warning Messages and Displays ..........................................116
Appendix
Appendix
Internal Memory/Memory Card Capacity ........................120
Specifications ................................................................................ 121
1
Before You Begin
Introduction
Symbols and Conventions
Symbols and Conventions
The following symbols are used in this manual:
c : This information should be read before use to ensure correct operation.
a : Points to note when using the camera.
b : Additional information that may be helpful when using the camera.
P: Other pages in this manual on which related information may be found.
Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the
monitor display may be simplified for explanatory purposes.
Supplied Accessories
Supplied Accessories
The following items are included with the camera:
NP-W126 rechargeable
battery
BC-W126 battery charger USB cable
A/V cable
• Shoulder strap
Owner’s Manual
(this manual)
• Basic Manual
Lens cap Lens hood CD-ROM
Before You Begin
2
Introduction
Parts of the Camera
Parts of the Camera
For more information, refer to the page listed to the right of each item.
8 Memory card slot cover .......................12
9 I (continuous shooting) button ...............42
10 Strap eyelet .................................................... 8
11 d (exposure compensation) button .........46
12 Memory card slot .....................................12
13 Flash ..................................................................39
14 N (flash pop-up) button ..............................39
15 Speaker ...................................................69, 96
1 Command dial ........................... 32, 33, 34
2 Mode dial ......................................................22
3 Hot shoe ........................................................89
4 AF-assist illuminator ............................103
Self-timer lamp ..........................................41
5 Lens ................................................................ 121
6 ON/OFF switch ..............................................15
7 Shutter button ...........................................19
16 Terminal cover ............................70, 72, 82
17 Microphone (L/R) .....................................67
18 Focus ring .....................................................48
19 Zoom ring .....................................................18
20 Connector for HDMI cable .................70
21 USB cable connector .....................72, 82
22 A/V cable connector..............................70
3
Before You Begin
Introduction
33 WB (white balance) button ..........................52
H (image search) button...........................63
34 Electronic viewfinder ..............................4
35 Eye sensor ....................................................... 4
36 EVF/LCD (display selection) button .............. 4
37 z (movie record) button .............................67
38 AE/AF LOCK (autofocus lock/autoexposure)
button ......................................................37, 49
39 Selector button (see below)
40 a (playback) button .......................... 15, 21
41 DISP (display)/BACK button ................. 7, 20
23 Monitor ............................................................. 5
24 Tripod mount
25 Battery-chamber latch ..........................10
26 Battery-chamber cover ........................10
27 Diopter adjustment control ................ 4
28 Indicator lamp ............................................20
29 ISO (sensitivity) button ................................51
k (playback zoom in) button .....................59
30 AE (autoexposure) button ............................47
n (playback zoom out) button ..................59
31 AF (autofocus) button ...................................50
g
(Intelligent Face Detection) button
...54,88
32 AF C-S-M (focus mode) button ...................48
info button ....................................................62
The Selector Button
MENU/OK button (P 16, 84, 91, 98)
Move cursor left (g)
F (macro) button (P 38)
Move cursor right (h)
N (flash) button (P 39)
Move cursor up (e)
Fn (Function) button (P 53)/
b (delete) button (P 21)
Move cursor down (f)
h (self-timer) button (P 41)
4
Introduction
The Electronic Viewfinder (EVF)
The electronic viewfinder provides the same information as the monitor, and can be
used when bright lighting conditions make the display in the monitor difficult to see.
Press EVF/LCD button to select from the auto switch, monitor, or electric view finder
mode. When the auto switch mode is set, the electric view finder turns on automati-
cally when you put your eye to the view finder, and the monitor turns on when you
take your eye away (note that the eye sensor may not respond if you are wearing
glasses or your head is an angle to the camera).
Eye sensor
The camera is equipped with diopter adjustment to accommodate individual dif-
ferences in vision. Slide the diopter adjustment control up and down until the view-
finder display is in sharp focus.
Bright Ambient Lighting
Reflections and glare caused by bright ambient lighting may make it hard to see the display in the monitor,
particularly when the camera is used outdoors. This can be addressed by holding the EVF/LCD button to trigger
outdoor mode. Outdoor mode can also be enabled using the T MONITOR SUNLIGHT MODE option in the
setup menu (P 102).
5
Before You Begin
Introduction
Camera Displays
Camera Displays
The following indicators may appear during shooting and playback. The indicators displayed vary with
camera settings.
Shooting
Shooting
N
10: 00
AM
10: 00
AM
12 /31 /2050
12/31/2050
9
250
250
F
4.5
F
4.5
P
800
* a: indicates that no memory card
is inserted and that pictures will
be stored in the cameras internal
memory (P 12).
18 Film simulation ..........................................86
19 White balance ............................................52
20 Battery level .................................................15
21 Exposure indicator ..................................46
22 Blur warning ......................................40, 116
23 Dual IS mode ........................................... 103
24 Focus warning ................................. 19, 116
25 Exposure compensation .....................46
26 Aperture .................................................33, 34
27 AE lock indicator .......................................37
28 Shutter speed .....................................33, 34
29 Date and time .............................................16
30 Focus frame .................................................36
31 Electronic level ..........................................90
32 Self-timer indicator .................................41
33 Macro (close-up) mode ........................38
34 Flash mode...................................................39
1 Shooting mode .........................................22
2 Manual focus indicator .........................48
3 Intelligent Face Detection
indicator .........................................................5 4
4 Intelligent sharpness ..............................87
5 Metering ........................................................47
6 Intelligent digital zoom ........................87
7 Continuous shooting mode .............42
8 Date stamp ................................................106
9 Silent mode indicator ....................20, 99
10 Temperature warning ........................ 120
11 Internal memory indicator *
12 Movie mode ................................................68
13 Monitor sunlight mode .....................102
14 Number of available frames ........... 120
15 Sensitivity ..............................................51, 84
16 Image size/quality ...................................85
17 Dynamic range ..........................................86
6
Introduction
Playback
Playback
100-0001
100-0001
400
400
12 /31 /2050
12/31/2050
YouTube
10: 00
AM
10: 00
AM
1 /250
1/250
F
4.5
F
4.5
N
9 Dynamic range ..........................................86
10 E mode ..............................................23
11 Portrait enhancer .....................................28
12 Mark for upload to ...................................92
13 Photobook assist ..................................... 64
14 Voice memo indicator ...........................96
15 DPOF print indicator ..............................73
16 Protected image .......................................94
17 Favorites .........................................................58
1 Playback mode indicator ............ 21, 58
2 Intelligent Face Detection
indicator ................................................. 54, 88
3 Red-eye removal indicator.................93
4 Pro focus mode,
pro low-light mode ................................25
5 Motion panorama z ..................30, 66
6 3D image .......................................................26
7 Gift image .....................................................58
8 Frame number ........................................ 101
7
Before You Begin
Introduction
Hiding and Viewing Indicators
Press DISP/BACK to cycle through shooting and playback indicators as follows:
Shooting: Indicators displayed/indicators hidden/best framing/HD framing/histogram
Playback: Indicators displayed/indicators hidden/I favorites (P 58)/photo info
Histograms
:
:
:
:OFF
ISO
400
1/250
F
4.5
2
3
-
1
12/31/2050 10:00
AM
100-0001
4:3
N
q
Dynamic range
w
Image size and quality
e
Sensitivity
r
Shutter speed/aperture
t
Film simulation
y
Flash mode
u
White balance
i
Exposure compensation
o
Frame number
!0
Picture (overexposed areas blink on and off )
!1
Histogram
Overexposed areas blink on and
off.
Histograms show the distribution of tones in the im-
age. Brightness is shown by the horizontal axis, the
number of pixels by the vertical axis.
Pixel brightness
Shadows Highlights
pixels
No. of
Optimal exposure: Pixels are
distributed in an even curve
throughout the tone range.
Overexposed: Pixels are clustered
at the right side of the graph.
Underexposed: Pixels are clustered
at the left side of the graph.
First Steps
8
Attaching Accessories
First Steps
The Strap
The Strap
Attach the strap to the two strap eyelets as shown
below.
c
To avoid dropping the camera, be sure the strap is cor-
rectly secured.
The Lens Cap
The Lens Cap
Attach the lens cap as shown.
To avoid losing the lens cap, pass the supplied string
through the eyelet (
q
) and secure the lens cap to the
strap (
w
).
The Lens Hood
The Lens Hood
Rotate the lens hood in the direction shown until
it clicks into place.
First Steps
9
Charging the Battery
The battery is not charged at shipment. Charge
the battery before use.
1
Place the battery in the charger.
Place the battery in the supplied battery
charger as shown.
Battery charger
Battery
Charge lamp
Arrow
The camera uses an NP-W126 rechargeable bat-
tery.
2
Plug the charger in.
Plug the charger into an indoor power out-
let. The charging indicator will light.
The Charging Indicator
The charging indicator shows battery charge
status as follows:
Charging
Charging
indicator
indicator
Battery status
Battery status
Action
Action
Off
Battery not
inserted.
Insert the battery.
Battery fully
charged.
Remove the battery.
On Battery charging.
Blinks Battery fault.
Unplug the charger and
remove the battery.
3
Charge the battery.
Remove the battery when charging is
complete. See the specifications (P 125) for
charging times (note that charging times
increase at low temperatures).
c
Unplug the charger when it is not in use.
10
Inserting the Battery
Insert the batteries in the camera as described
below.
1
Open the battery-chamber cover.
Slide the battery-cham-
ber latch in the direction
shown and open the bat-
tery-chamber cover.
a
Be sure the camera is off before opening the bat-
tery-chamber cover.
c
Do not open the battery-chamber cover when
the camera is on. Failure to observe this pre-
caution could result in damage to image files or
memory cards.
Do not use excessive force when handling the
battery-chamber cover.
2
Insert the battery.
Insert the battery as shown in the illustration
inside the battery chamber, using the bat-
tery to keep the latch pressed to one side.
Arrow
Battery latch
c
Insert the battery in the correct orientation. Do
NOT use force or attempt to insert the battery up-
side down or backwards. The battery will slide in
easily in the correct orientation.
First Steps
11
Inserting the Battery
3
Close the battery-chamber cover.
Press the cover down un-
til it clicks into place.
Removing the Battery
Before removing the battery,
turn the camera off and open
the battery-chamber cover. To
remove the battery, press the
battery latch to the side, and
slide the battery out of the cam-
era as shown.
Battery latch
c Batteries
Remove dirt from the battery terminals with a clean,
dry cloth. Failure to observe this precaution could
prevent the battery from charging.
Do not affix stickers or other objects to the battery.
Failure to observe this precaution could make it im-
possible to remove the battery from the camera.
Do not short the battery terminals. The battery could
overheat.
Read the cautions in “Power Supply and Battery”
(P vi).
Use only battery chargers designated for use with the
battery. Failure to observe this precaution could re-
sult in product malfunction.
• Do not remove the labels from the battery or attempt
to split or peel the outer casing.
• The battery gradually loses its charge when not in
use. Charge the battery one or two days before use.
12
Inserting a Memory Card
Although the camera can store pictures in inter-
nal memory, optional SD, SDHC and SDXC mem-
ory cards (sold separately) can be used to store
additional pictures.
1
Open the memory card slot cover.
a
Be sure the camera is off be-
fore opening the memory
card slot cover.
2
Insert the memory card.
Holding the memory card in the orientation
shown below, slide it in until it clicks into
place at the back of the slot.
Click
c
Be sure card is in the correct orientation; do not
insert at an angle or use force. If the memory
card is not correctly inserted or no memory
card is inserted, a will appear in the LCD moni-
tor and internal memory will be used for record-
ing and playback.
SD/SDHC/SDXC memory
cards can be locked, mak-
ing it impossible to format
the card or to record or
delete images. Before in-
serting an SD/SDHC/SDXC
memory card, slide the
write-protect switch to the
unlocked position.
Write-protect
Write-protect
switch
switch
First Steps
13
Inserting a Memory Card
3
Close the memory card slot cover.
Removing Memory Cards
After confirming that the cam-
era is off, press the card in and
then release it slowly. The card
can now be removed by hand.
c
The memory card may spring out if you remove
your finger immediately after pushing the card in.
Memory cards may be warm to the touch after be-
ing removed from the camera. This is normal and
does not indicate a malfunction.
14
Inserting a Memory Card
Compatible Memory Cards
Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC mem-
ory cards have been approved for use in the cam-
era. A complete list of approved memory cards
is available at http://www.fujifilm.com/support/
digital_cameras/compatibility/. Operation is not
guaranteed with other cards. The camera can not
be used with xD-Picture Cards or MultiMediaCard
(MMC) devices.
c Memory Cards
Do not turn the camera off or remove the memory
card while the memory card is being formatted or
data are being recorded to or deleted from the card.
Failure to observe this precaution could damage the
card.
Format SD/SDHC/SDXC memory cards before first
use, and be sure to reformat all memory cards af-
ter using them in a computer or other device. For
more information on formatting memory cards, see
K FORMAT” (P 100).
Memory cards are small and can be swallowed; keep
out of reach of children. If a child swallows a memory
card, seek medical assistance immediately.
miniSD or microSD adapters that are larger or smaller
than the standard dimensions of an SD/SDHC/SDXC
card may not eject normally; if the card does not
eject, take the camera to an authorized service repre-
sentative. Do not forcibly remove the card.
Do not affix labels to memory cards. Peeling labels
can cause camera malfunction.
• Movie recording may be interrupted with some types
of SD/SDHC/SDXC memory card. Use a G card
or better when shooting HD or high-speed movies.
The data in internal memory may be erased or cor-
rupted when the camera is repaired. Please note that
the repairer will be able to view pictures in internal
memory.
Formatting a memory card or internal memory in the
camera creates a folder in which pictures are stored.
Do not rename or delete this folder or use a comput-
er or other device to edit, delete, or rename image
files. Always use the camera to delete pictures from
memory cards and internal memory; before editing
or renaming files, copy them to a computer and edit
or rename the copies, not the originals.
First Steps
15
Turning the Camera on and Off
Rotate the ON/OFF switch to ON to turn the camera
on.
Select OFF to turn the camera off.
b Switching to Playback Mode
Press the a button to start playback. Press a button
again or press the shutter button halfway to return to
shooting mode.
b Auto Power Off
The camera will turn off automatically if no operations
are performed for the length of time selected in the
M AUTO POWER OFF menu (P 102). To reactivate the
camera after it has turned off automatically, turn the
ON/OFF switch to OFF and then back to ON.
Battery Level
Battery level is shown as follows:
Indicator
Indicator
Description
Description
D (white)
Battery partially discharged.
C (white)
Battery more than half discharged.
B (red)
Low battery. Charge as soon as pos-
sible.
A (blinks red)
Battery exhausted. Turn camera off
and charge battery.
16
Basic Setup
A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 99).
START MENU
SET NO
ENGLISH
PORTUGUÊS
ESPAÑOL
FRANCAIS
DEUTSCH
1
Highlight a language and press MENU/OK.
a
Press DISP/BACK to skip the current step. Any steps you skip will be displayed
the next time the camera is turned on.
SET NO
DATE / TIME NOT SET
2014
2013
2011
2010
YY. MM. DD
1. 1 12
:
00
AM
2012
2
The date and time will be displayed. Press the selector left or right to
highlight the year, month, day, hour, or minute and press up or down
to change. To change the order in which the year, month, and day
are displayed, highlight the date format and press the selector up or
down. Press MENU/OK when settings are complete.
b The Camera Clock
If the battery is removed for an extended period, the camera clock will be reset and the language-selection dialog
will be displayed when the camera is turned on.
17
Basic Photography and Playback
Taking Pictures in R (E AUTO) Mode
This section describes how to take pictures in R (E AUTO) mode.
1
Select a mode.
When you rotate the mode dial to O, the R display will appear in the LCD monitor.
The o Icon
In R mode, the camera continuously adjusts focus and searches for faces, increasing the drain on the
battery. o is displayed in the LCD monitor.
Scene Icon (P 23)
The camera automatically selects the appropriate scene.
a
• The camera analyses the scene and selects the preferred E mode when the shutter button is pressed
halfway (P 24).
To raise the flash when lighting is poor, press the flash pop-up button (P 39).
Basic Photography and Playback
18
Taking Pictures in R (E AUTO) Mode
2
Frame the picture.
Use the zoom ring to
frame the picture in the
display. The zoom indica-
tor appears.
Zoom ring
Zoom indicator
b Focus Lock
Use focus lock (P 36) to focus on subjects that are not
in the focus frame.
Holding the Camera
Hold the camera steady with
both hands and brace your
elbows against your sides.
Shaking or unsteady hands
can blur your shots.
To prevent pictures that are
out of focus or too dark (un-
derexposed), keep your fin-
gers and other objects away
from the lens and flash.
19
Basic Photography and Playback
Taking Pictures in R (E AUTO) Mode
3
Focus.
Press the shutter button halfway
to focus.
If the camera is able to focus, it will beep twice
and the indicator lamp will glow green.
If the camera is unable to focus, the focus frame
will turn red, s will be displayed, and the
indicator lamp will blink green. Change the
composition or use focus lock (P 36).
4
Shoot.
Smoothly press the shutter button
the rest of the way down to take
the picture.
b The Shutter Button
The shutter button has two positions. Pressing the
shutter button halfway (
q
) sets focus and exposure;
to shoot, press the shutter button the rest of the way
down (
w
).
qw
Press halfway
Press the rest of
the way down
Double
beep
Click
a
If the subject is poorly lit, the AF-assist illuminator may
light to assist focus (P 103). For information on using the
flash when lighting is poor, see page 39.
20
Taking Pictures in R (E AUTO) Mode
Silent Mode
In situations in which camera sounds or lights may be
unwelcome, hold the DISP/BACK button down until o
is displayed.
The camera speaker, flash, and AF-assist illuminator/
self-timer lamp turn off and flash and volume settings
can not be adjusted (note that the flash will still fire
when C is selected in scene mode). To restore nor-
mal operation, press the DISP/BACK button until the o
icon is no longer displayed.
The Indicator Lamp
Indicator lamp
The indicator lamp shows camera status as follows:
Indicator lamp
Indicator lamp
Camera status
Camera status
Glows green Focus locked.
Blinks green
Blur, focus, or exposure warning. Pic-
ture can be taken.
Blinks green
and orange
Recording pictures. Additional pic-
tures can be taken.
Glows
orange
Recording pictures. No additional pic-
tures can be taken at this time.
Blinks orange
Flash charging; flash will not fire when
picture is taken.
Blinks red
Lens or memory error (memory card
full or not formatted, format error, or
other memory error).
b Warnings
Detailed warnings appear in the display. See pages
116–119 for more information.
21
Basic Photography and Playback
Viewing Pictures
Pictures can be viewed in the monitor. When taking important photographs, take a test shot and
check the results.
1
Press the a button.
The most recent picture will be displayed in
the monitor.
100-0001
100-0001
1 / 1000
1/1000
F
4.
4.5
F4.5
2
2
-
1
-
1
3
3
2
View additional pictures.
Press the selector right to view
pictures in the order recorded, left
to view pictures in reverse order.
Press the shutter button to exit to shooting
mode.
Deleting Pictures
To delete pictures, press the b button. A menu of
deletion options will be displayed (P 61).
b The Playback Menu
Pictures can also be deleted from the playback menu
(P 91).
22
More on Photography
Shooting Mode
Choose a shooting mode according to the scene or type of subject. To
choose a shooting mode, rotate the mode dial to the desired setting. The
following modes are available:
P, S, A, M: Select for full control over camera settings, including
aperture (M and A) and/or shutter speed (M and S) (P 32).
C (CUSTOM): Recall stored settings for
modes P, S, A, M and all E modes
except R (P 35).
N (MOTION PANORAMA 360): Select for
taking a panorama (P 30).
O: Improve clarity, reduce noise, in-
crease dynamic range, or let the camera
automatically adjust settings to suit the
scene (P 23).
Adv. (ADVANCED): Sophisticated tech-
niques made easy (P 24).
B (AUTO): A simple “point-and-shoot”
mode recommended for first-time users
of digital cameras (P 24).
SP1, SP2 (SCENE POSITION): Choose a scene suited to the subject
or shooting conditions and let the camera do the rest (P 28).
More on Photography
23
More on Photography
Shooting Mode
O
O
(
(
E
E
AUTO/
AUTO/
E
E
Priority)
Priority)
Optimize settings for your current subject or improve clarity, reduce noise, or enhance
dynamic range. Rotate the mode dial to O and choose one of the following E
modes in the shooting menu.
R
R
(
(
E
E
AUTO)
AUTO)
The camera automatically selects the scene and E mode according to shooting conditions.
a
If S is selected for O IMAGE SIZE in R mode, the camera will automatically select the optimal image size.
The Scene Icon
The camera selects from the following scenes:
Scene
Scene
Main subject
Main subject
AUTO
AUTO
LAND-
LAND-
SCAPE
SCAPE
NIGHT
NIGHT
NIGHT
NIGHT
(TRIPOD)
(TRIPOD)
MACRO
MACRO
BEACH
BEACH
SUNSET
SUNSET
SNOW
SNOW
SKY
SKY
GREEN-
GREEN-
ERY
ERY
SKY &
SKY &
GREENERY
GREENERY
Non-portrait
Non-portrait
acd
*
h
*
euvwxyz
Portrait
Portrait
Normal
Normal
ddc dd
*
dh
*
du dv dw dx dy dz
Backlit
Backlit
ggc
———
gu gv gw gx gy gz
Moving object
Moving object
ccc cd ch ce cu cv cw cx cy cz
Portrait and
Portrait and
motion
motion
Normal
Normal
aac ad ah
au av aw ax ay az
Backlit
Backlit
bbc
———
bu bv bw bx by bz
* If n is displayed, the camera will take a series of shots (advanced anti-blur; P 24).
c
The mode selected may vary with shooting conditions. If the mode and subject do not match, select B mode
(P 24) or choose SP (P 28) and select a scene manually.
24
Shooting Mode
Advanced Anti Blur
When n is displayed, the camera will take a series of
exposures and combine them to form a single image,
reducing “noise” (mottling) and blur.
a
n is available when ON is selected in the shooting
menu (P 88) and the flash (P 39) is off or set to auto.
c
Some time may be required to combine the expo-
sures into a single image. A single combined image
may not be created if the subject or camera moves
during shooting. Keep the camera steady during
shooting and do not move the camera until shoot-
ing is complete.
Frame coverage is reduced.
The EXR Icon
When the shutter button is pressed halfway, the
camera chooses the preferred E mode:
S (RESOLUTION PRIORITY): Produces crisp, clear
shots.
T (HIGH ISO & LOW NOISE): Reduces noise in pic-
tures taken at high sensitivities.
U (D-RANGE PRIORITY): Increases the amount of
detail visible in highlights.
E
E
Priority
Priority
Select this mode to manually choose from the fol-
lowing E modes:
S (RESOLUTION PRIORITY): Choose for crisp, clear
shots.
T (HIGH ISO & LOW NOISE): Reduce noise in pic-
tures taken at high sensitivities.
U (D-RANGE PRIORITY): Increase the amount of
detail visible in highlights.
U DYNAMIC RANGE (P 86) can be set to M
(1600%) and D (800%).
B
B
AUTO
AUTO
Choose for crisp, clear snapshots. This
mode is recommended in most situa-
tions.
Adv.
Adv.
ADVANCED
ADVANCED
This mode combinespoint-and-shoot
simplicity with sophisticated photograph-
ic techniques. The
A
Adv. MODE op-
tion in the shooting menu can be used
to choose from the following advanced
modes:
25
More on Photography
Shooting Mode
i
i
PRO FOCUS
PRO FOCUS
The camera takes up to three
shots each time the shutter
button is pressed, softening
the background to emphasize
the main subject. The amount
of softening can be adjusted before shooting by
rotating the command dial. Use for portraits or
photos of flowers similar to those produced by
SLR cameras.
a
Softening can not be applied to background objects
that are too close to the main subject. If a message
stating that the camera can not create the effect is
displayed when the camera focuses, try backing away
from your subject and zooming in. The camera may
also be unable to soften the background if the subject
is moving; if prompted, check the results and try again.
j
j
PRO LOW-LIGHT
PRO LOW-LIGHT
Each time the shutter button
is pressed, the camera makes
four exposures and combines
them into a single photograph.
Use to reduce noise and blur
when photographing poorly lit subjects or static
subjects at high zoom ratios.
a
A single combined photograph may not be created
with some scenes or if the subject or camera moves
during shooting. Do not move the camera until shoot-
ing is complete.
Pro Focus/Pro Low-Light
To save unprocessed copies of pictures taken in these
modes, select ON for the t SAVE ORG IMAGE op-
tion in the setup menu (P 105).
c
Keep the camera steady during shooting.
Frame coverage is reduced.
26
Shooting Mode
n
n
MULTIPLE EXPOSURE
MULTIPLE EXPOSURE
Create a photograph that combines two expo-
sures.
1
Take the first shot.
2
Press MENU/OK. The first shot will be shown su-
perimposed on the view through the lens as a
guide to taking the second shot.
a
To return to Step 1 and retake the first shot, press
the selector left. To save the first shot and exit
without creating a multiple exposure, press DISP/
BACK.
3
Take the second shot.
4
Press MENU/OK to create the multiple exposure,
or press the selector left to return to Step 3 and
retake the second shot.
i
i
I
I
NDIVID. SHUTTER 3D
NDIVID. SHUTTER 3D
Take two shots from different angles to create a
3D image.
1
To choose the order in
which the pictures are tak-
en, press the selector right
to display the current order
and then press the selector
left or right to choose from the options below.
G: Take the left shot first.
H: Take the right shot first.
2
Press the shutter button to take the first shot.
a
To exit without recording a picture, press DISP/
BACK.
TURN
27
More on Photography
Shooting Mode
3
The first shot will be shown superimposed on
the view through the lens. Using it as a guide,
frame the second shot and press the shutter
release button.
a
The 3D effect
may not be vis-
ible with some
subjects or under
some shooting conditions. For best results, the
distance the camera is moved between shots
should be about 1/30th to 1/50th of the dis-
tance to the subject.
The camera will turn off automatically if no op-
erations performed for the time selected for
N AUTO POWER OFF ( P 102). The first shot will
not be saved if the second shot is not taken be-
fore the camera turns off.
Viewing and Printing 3D Images
The camera displays images in 2D. Press the selector
down to toggle between the first and second shots.
Devices equipped for 3D display, such as the FINEPIX
REAL 3D V3 digital photo frame or FINEPIX REAL 3D
W3 digital camera, will display the images in 3D.
3D prints can be ordered from http://www.fujifilm.
com/3d/print/
The supplied software displays 3D anaglyph images.
3D photos can also be viewed using other applica-
tions that support the MP format.
3D TVs that support the MP format can display im-
ages in 3D. See the manual for your TV for details.
c
Images are not output in 3D when printed directly
from the camera.
• 3D images are displayed in 2D in slide shows and
when output on a conventional TV.
3D images can not be edited or retouched.
Note: The MP (Multi-Picture) format is a CIPA standard for
files containing multiple still images. Files in MP format are
referred to as “MP files” and have the extension “*.MPO”. The
camera uses this format for 3D images.
28
Shooting Mode
SP1/SP2
SP1/SP2
: SCENE POSITION
: SCENE POSITION
The camera offers a choice ofscenes, each adapted to particular shooting conditions or
a specific type of subject. Use the A SCENE POSITION option in the shooting menu to
choose the scene assigned to the SP1/SP2 position on the mode dial.
Scene
Scene
Description
Description
C
C
NATURAL &
NATURAL &
N
N
The camera takes two shots: one without the flash and one with.
D NATURAL LIGHT
Capture natural lighting under low-light conditions.
L PORTRAIT
Choose for portraits.
Z PORTRAIT ENHANCER
Choose for a smooth skin effect when shooting portraits.
l DOG
Choose when photographing dogs.
m CAT
Choose when photographing cats.
M LANDSCAPE
Choose for daylight shots of buildings and landscapes.
N SPORT
Choose when photographing moving subjects.
O NIGHT
Choose this mode for poorly lit twilight or night scenes.
H NIGHT (TRIPOD)
Choose this mode for slow shutter speeds when shooting at night.
U FIREWORKS
Slow shutter speeds are used to capture the expanding burst of light from a firework.
Q SUNSET
Choose this mode to record the vivid colors in sunrises and sunsets.
R SNOW
Choose for crisp, clear shots that capture the brightness of scenes dominated by shining white snow.
V BEACH
Choose for crisp, clear shots that capture the brightness of sunlit beaches.
U PARTY
Capture indoor background lighting under low-light conditions.
V FLOWER
Choose for vivid close-ups of flowers.
W TEXT
Take clear pictures of text or drawings in print.
29
More on Photography
Shooting Mode
l DOG/m CAT
The camera focuses on the faces of dogs or cats that are facing the camera, and the self-timer menu offers a
n AUTO RELEASE option that releases the shutter automatically when a pet is detected (P 41). During play-
back, image search (P 63) can be used to search for pictures taken in either mode.
1
Although camera can detect many different breeds of dogs and cats, results may vary with the breed and shoot-
ing conditions. The camera may fail to detect pets with dark-colored faces or long hair covering their entire face.
If a dog or cat is not detected, the camera focuses on the subject at the center of the frame.
30
Shooting Mode
r
r
MOTION PANORAMA 360
MOTION PANORAMA 360
Follow an on-screen guide
to take photos that will
automatically be joined to
form a panorama.
1
Rotate the zoom ring until the zoom indicator
turns white (P 18).
2
To select the angle through which you will pan
the camera while shooting, press the selector
down. Press the selector left or right to high-
light an angle and press MENU/OK.
3
Press the selector right to view a choice of pan
directions. Press the selector left or right to
highlight a pan direction and press MENU/OK.
4
Press the shutter button all the way down to
start recording. There is no need to keep the
shutter button pressed during recording.
5
Pan the camera in the direction shown by
the arrow. Shooting ends
automatically when the
progress bar is full and the
panorama is complete.
a
Shooting ends if the shutter but-
ton is pressed all the way down during shooting. No
panorama will be recorded if the shutter button is
pressed before the camera has been panned through
120 °.
120
Progress bar
31
More on Photography
Shooting Mode
c
Panoramas are created from multiple frames. The
camera may in some cases record a greater or lesser
angle than selected or be unable to stitch the frames
together perfectly. The last part of the panorama
may not be recorded if shooting ends before the
panorama is complete.
Shooting may be interrupted if the camera is panned
too quickly or too slowly. Panning the camera in a
direction other than that shown cancels shooting.
The desired results may not be achieved with mov-
ing subjects, subjects close to the camera, unvarying
subjects such as the sky or a field of grass, subjects
that are in constant motion, such as waves and wa-
terfalls, or subjects that undergo marked changes in
brightness. Panoramas may be blurred if the subject
is poorly lit.
z
Choose z for seamless 360° panoramas that can be
played back in a loop (P 66).
a
The t SAVE ORG IMAGE option in the setup menu
can be used to record a v panorama in addition to
a seamless z panorama (P 105).
c
Depending on the subject and shooting conditions,
the camera may produce distorted results or a v
panorama. The top and bottom of the area visible in
the shooting display are cropped out and white strips
may appear at the top and bottom of the display.
For Best Results
For best results, move the camera in a small circle at
a steady speed, keeping the camera horizontal and
being careful only to pan in the direction shown by
the guides. If the desired results are not achieved, try
panning at a different speed.
32
Shooting Mode
P
P
: PROGRAM AE
: PROGRAM AE
In this mode, the camera sets exposure
automatically. If desired, you can choose
different combinations of shutter speed
and aperture that will produce the same
exposure (program shift).
c
If the subject is outside the metering range of the cam-
era, the shutter speed and aperture displays will show
“---”. Press the shutter button halfway to measure ex-
posure again.
Program Shift
Rotate the command dial to choose the desired com-
bination of shutter speed and aperture. The default
values can be restored by raising the flash or turning
the camera off. Program shift is only available if the
flash is off and an option other than AUTO is selected
for U DYNAMIC RANGE and N ISO.
250
F
4.5
Shutter speed
Aperture
33
More on Photography
Shooting Mode
S
S
: SHUTTER PRIORITY AE
: SHUTTER PRIORITY AE
Choose the shutter speed using the
command dial, while the camera ad-
justs aperture for optimal exposure.
1000
Shutter speed
c
• If the correct exposure can not be achieved at the
selected shutter speed, aperture will be displayed in
red. Adjust shutter speed until the correct exposure
is achieved. If the subject is outside the metering
range of the camera, the aperture display will show
“F---”. Press the shutter button halfway to measure
exposure again.
The shutter speed is restricted depending on the ISO
setting.
A
A
: APERTURE PRIORITY AE
: APERTURE PRIORITY AE
Choose the aperture using the com-
mand dial, while the camera adjusts
shutter speed for optimal exposure.
F3.5
Aperture
c
If the correct exposure can not be achieved at the se-
lected aperture, shutter speed will be displayed in red.
Adjust aperture until the correct exposure is achieved.
If the subject is outside the metering range of the cam-
era, the shutter speed display will show “---”. Press the
shutter button halfway to measure exposure again.
34
Shooting Mode
M
M
: MANUAL
: MANUAL
In this mode, you choose both shutter
speed and aperture. If desired, expo-
sure can be altered from the value sug-
gested by the camera.
Press the d button to choose between shutter
speed and aperture and rotate the command dial
to adjust the selected setting.
250
F
4.5
M
Shutter speed
Aperture
c
• Noise in the form of randomly-spaced bright pixels
may occur in long exposures.
The shutter speed is restricted depending on the ISO
setting.
The Exposure Indicator
The amount the picture will be under- or over-ex-
posed at current settings is shown by the exposure
indicator.
250
F
4.5
35
More on Photography
Shooting Mode
C
C
: CUSTOM MODE
: CUSTOM MODE
In P, S, A, M and all E modes ex-
cept R, the K CUSTOM SET option
in the shooting menu (P 90) can be
used to save current camera and menu
settings. These settings are recalled
whenever the mode dial is rotated to
C (custom mode).
Menu/setting
Menu/setting
Settings saved
Settings saved
Shooting
Shooting
menu
menu
N ISO, O IMAGE SIZE, T IMAGE QUAL-
ITY, U DYNAMIC RANGE, P FILM SIMULA-
TION, d WB SHIFT, f COLOR, e TONE,
q SHARPNESS, h NOISE REDUCTION,
y INTELLIGENT SHARPNESS, R INTELLI-
GENT DIGITAL ZOOM, b FACE DETECTION,
n FACE RECOGNITION, W MOVIE MODE,
a STILL SHOOTING IN MOVIE, J AE BKT
EV STEPS, I FLASH, g EXTERNAL FLASH,
2 ELECTRONIC LEVEL
Setup menu
Setup menu
C AF ILLUMINATOR, j RAW
Other
Other
ISO, metering, autofocus mode, focus mode,
white balance, burst mode, macro mode, flash
mode, exposure compensation, monitor dis-
play options (DISP/BACK button)
c
Once the camera is turned off, R INTELLIGENT DIGI-
TAL ZOOM is deactivated.
36
Focus Lock
To compose photographs with off-center subjects:
1
Position the subject in the focus frame.
2
Focus.
Press the shutter button
halfway to set focus and
exposure. Focus and ex-
posure will remain locked
while the shutter button
is pressed halfway (AF/AE
lock).
3
Recompose the picture.
Keeping the shutter but-
ton pressed halfway, re-
compose the picture.
4
Shoot.
Autofocus
Although the camera boasts a high-precision autofo-
cus system, it may be unable to focus on the subjects
listed below. If the camera is unable to focus using
autofocus, use focus lock to focus on another subject
at the same distance and then recompose the pho-
tograph.
Very shiny subjects such as mirrors or car bodies.
• Fast-moving subjects.
Subjects photographed through a window or other
reflective object.
Dark subjects and subjects that absorb rather than
reflect light, such as hair or fur.
Insubstantial subjects, such as smoke or flame.
Subjects that show little contrast with the back-
ground (for example, subjects in clothing that is the
same color as the background).
• Subjects positioned in front of or behind a high-
contrast object that is also in the focus frame (for
example, a subject photographed against a back-
drop of highly contrasting elements).
37
More on Photography
The AE/AF LOCK Button
The AE/AF LOCK button can be used to lock exposure or focus.
Locking Exposure
Locking Exposure
1
Meter exposure.
Position the subject in the focus frame and
press the AE/AF LOCK button to meter expo-
sure.
2
Focus.
Keeping the AE/AF LOCK
button pressed, press the
shutter button halfway
to focus. Focus and ex-
posure will remain locked while the shutter
button is pressed halfway, even if you later
release the AE/AF LOCK button.
Repeat steps 1 and 2 as desired to refocus
before taking the picture.
3
Recompose the picture.
Keeping the shutter button pressed halfway,
recompose the picture.
c
Adjusting zoom ends AE lock. AE lock is not avail-
able with Intelligent Face Detection.
4
Shoot.
Locking Focus
Locking Focus
If AF LOCK ONLY is selected for v AE/AF-LOCK
BUTTON in the setup menu (P 104), pressing the
AE/AF LOCK button locks focus. If AE/AF LOCK is
selected, both focus and exposure will be locked.
a
If AE&AF ON/OFF SWITCH is selected for k AE/AF-
LOCK MODE in the setup menu (P 104), exposure and/
or focus will lock when the AE/AF LOCK button is pressed
and remain locked until the button is pressed again.
+
38
F Macro and Super Macro Modes (Close-ups)
For close-ups, press the selector left (F) to choose from the macro options shown below.
OFF
OFF
Choose from F (macro mode),
G (super macro mode), or
OFF (macro mode off)
When macro mode is in effect, the camera focuses on subjects near the center of the frame. Use the
zoom ring to compose pictures. The following restrictions apply in super macro mode: the lens must
be zoomed all the way out (at other zoom positions, o is displayed) and the flash can not be used.
a
Use of a tripod is recommended to prevent blur caused by camera shake.
Flash compensation may be required when using the flash (P 89).
Using the flash at close range may cast a lens shadow. Zoom a little or have more distance from the subject.
39
More on Photography
N Using the Flash (Super-Intelligent Flash)
When the flash is used, the camera’s Super-Intelligent Flash system instantly analyzes the scene based
on such factors as the brightness of the subject, its position in the frame, and its distance from the
camera. Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed
while preserving the effects of ambient background lighting, even in dimly-lit indoor scenes. Use the
flash when lighting is poor, for example when shooting at night or indoors under low light.
1
Raise the flash.
Press the flash pop-up button to raise the flash.
2
Choose a flash mode.
Press the selector right (N). The flash mode changes each time the selector is pressed.
Mode
Mode
Description
Description
A/K
(AUTO FLASH)
The flash fires when required. Recommended in most situations.
N/L
(FORCED FLASH)
The flash fires whenever a picture is taken. Use for backlit subjects or for natural
coloration when shooting in bright light.
O/M
(SLOW SYNCHRO)
Capture both the main subject and the background under low light (note that
brightly lit scenes may be overexposed).
40
N Using the Flash (Super-Intelligent Flash)
c
The flash may fire several times with each shot. Do not move the camera until shooting is complete.
a
The peripheral part of an image may be dark when using the flash.
Remove lens hoods to prevent shadows in photos taken with the flash.
Red-Eye Removal
When Intelligent Face Detection is active (P 54), and ON is sele cte d for B RED EYE REMOVAL in the
setup menu (P 103), red-eye removal is available in K, L, and M.
Red-eye removal minimizes “red-eye” caused when light from the flash is reflected from the subject’s
retinas as shown in the illustration at right.
Turning the Flash Off
Lower the flash where flash photography is prohibited or to capture natural lighting un-
der dim light. At slow shutter speeds, k will be displayed to warn that pictures may be
blurred; use of a tripod is recommended.
Optional Flash Units
The camera can be used with optional EF-42 and EF-20 clip flash units (P 108).
41
More on Photography
J Using the Self-Timer
To use the self-timer, press the selector down (h) and choose from the following options:
OFF
OFF
Option
Option
Description
Description
T (OFF)
Self-timer off.
n (AUTO RELEASE)
The shutter is released automatically when the camera detects the face of a cat or dog
(P 29).
o (AUTO RELEASE)
The shutter is released automatically when the camera detects a human portrait subject
facing the camera. Use for portraits of babies.
S (10 SEC)
The shutter is released ten seconds after the shutter button is pressed. Use for self-portraits.
The self-timer lamp on the front of the camera lights when the timer starts and begins to
blink shortly before the photo is taken.
R (2 SEC)
The shutter is released two seconds after the shutter button is pressed. Use to reduce blur
caused by the camera moving when the shutter button is pressed. The self-timer lamp will
blink as the timer counts down.
Burst Mode
If I is selected for burst mode (P 42), the camera will record burst of five photographs when the timer expires,
improving your chances of getting the desired results in portraits taken with the self-timer.
42
I Continuous Shooting (Burst Mode)
Capture motion or automatically vary selected settings over a series of pictures.
Press the I button and choose
from the following options:
OFF
OFF
CONTINUOUS
OFF: OFF
I: TOP
P: BEST FRAME CAPTURE
O: AE BKT
X: FILM SIMULATION BKT
Y: DYNAMIC RANGE BKT
a
• Focus and exposure are determined by the first frame
in each series. The flash turns off automatically; the
previously-selected flash mode is restored when con-
tinuous shooting is turned off.
Frame rate varies with shutter speed, shooting condi-
tions, and the number of pictures in each burst.
The number of pictures that can be taken in a single
burst varies with the scene and camera settings. The
number of pictures that can be recorded depends on
the memory available.
43
More on Photography
I Continuous Shooting (Burst Mode)
I
I
TOP n
TOP n
The camera takes photographs while the shutter
button is pressed. To choose the frame rate:
1
Press the selector right
when the camera is in
shooting mode.
2
Press the selector up or down to choose a
frame rate and press MENU/OK to select and re-
turn to shooting mode.
P
P
BEST FRAME CAPTURE
BEST FRAME CAPTURE
The camera takes a series of pictures, starting
before and ending after the shutter button is
pressed. To choose the frame rate and number
of shots:
1
Press the selector right when the camera is in
shooting mode.
2
Highlight the current frame rate and press the
selector right, then press selector up or down
to choose a new value and press MENU/OK to
select.
c
Some frame rates may reduce the number of shots
available in Step 3.
CONTINUOUS SHOOTING SETUP
11
frames/s
8
frames/s
5
frames/s
3
frames/s
44
I Continuous Shooting (Burst Mode)
3
Highlight the number of
shots and press the selec-
tor right. Press the selector
up or down to choose the
number of shots in each
burst and left or right to
choose their distribution
(the number on the left is taken before and the
number on the right after the shutter button
is pressed). Press MENU/OK when settings are
complete.
4
Press DISP/BACK to return to shooting mode.
5
Take photographs. The camera begins record-
ing while the shutter button is pressed half-
way, and completes the burst when the shut-
ter button is pressed all the way down. The
illustration shows a burst of eight shots, three
before the shutter button is pressed and four
after.
Shutter button
pressed halfway
Shutter button
pressed all the
way down
“After
shots
“Before
shots
c
If the shutter button is pressed all the way down be-
fore the number of frames selected for the “before”
portion is recorded, the remaining frames will be
taken after the shutter button is pressed all the way
down.
• If the shutter button is pressed halfway for an extend-
ed period, the camera may record the burst before
the shutter button is pressed all the way down.
CONTINUOUS SHOOTING SETUP
SET CANCEL
FRAMES8
–1S SHUTTER 1S
16
Shots per burst
Distribution
45
More on Photography
I Continuous Shooting (Burst Mode)
O
O
AE BKT
AE BKT
Each time the shutter button is pressed, the
camera takes three shots: one using the metered
value for exposure, the second overexposed by
the amount selected for J AE BKT EV STEPS in
the shooting menu (P 89), and the third underex-
posed by the same amount (the camera may not
be able to use the selected bracketing increment
if the amount of over- or under- exposure exceeds
the limits of the exposure metering system).
X
X
FILM SIMULATION BKT
FILM SIMULATION BKT
Each time the shutter button is pressed, the cam-
era takes one shot and processes it to create three
copies with different P FILM SIMULATION set-
tings (P 86): c PROVIA/STANDARD for the first,
d Velvia/VIVID for the second, and e ASTIA/
SOFT for the third.
Y
Y
DYNAMIC RANGE BKT
DYNAMIC RANGE BKT
Each time the shutter button is pressed, the cam-
era takes three shots at different U DYNAMIC
RANGE settings (P 86): A 100% for the first,
B 200% for the second, and C 400% for
the third (N ISO can not exceed 3200; values less
than 400 are not available when O is selected for
O IMAGE SIZE).
46
d Exposure Compensation
Use exposure compensation when photographing very bright, very dark, or high-contrast subjects.
Press the d button to display
the exposure indicator and
rotate the command dial to
choose a value.
F
4.5
F
4.5
250
250
P
Exposure indicator
The effect is visible in the display. Press the d
button again to select.
Choose negative values
to reduce exposure
Choose positive values to
increase exposure
1
• A d icon and exposure indicator are displayed at
settings other than ±0. Exposure compensation is
not reset when the camera is turned off; to restore
normal exposure control, choose a value of ±0.
• Turn the flash off when using exposure compensa-
tion.
47
More on Photography
Metering
To choose how the camera meters exposure, press the AE button and then choose from the following
options.
MULTI
PHOTOMETRY
Option
Option
Description
Description
o
(MULTI)
Automatic scene recognition is used to adjust exposure for a wide range of shooting conditions.
p
(SPOT)
The camera meters lighting conditions at the center of the frame. Recommended when the back-
ground is much brighter or darker than the main subject.
q
(AVERAGE)
Exposure is set to the average for the entire frame. Provides consistent exposure across multiple
shots with the same lighting, and is particularly effective for landscapes and portraits of subjects
dressed in black or white.
48
Focus Mode
To choose how the camera focuses, during still photography and movie recording press the AF C-S-M
button and then choose from the following options.
CONTINUOUS AF
FOCUSING
Mode
Mode
Description
Description
K
(SINGLE AF)
Focus locks while the shutter button is pressed halfway. Choose for stationary subjects.
J
(CONTINUOUS AF)
The camera continually adjusts focus to reflect changes in the distance to the subject even
when the shutter button is not pressed halfway (note that this increases the drain on the
batteries). r (CENTER) is automatically selected for autofocus mode (P 50); if Intelligent Face
Detection is on, the camera will continually adjust focus for the selected face. Choose for
moving subjects.
j
(MANUAL FOCUS)
Focus manually using the focus ring. Rotate the ring left to reduce the focus distance, right
to increase. The manual focus indicator indicates how closely the focus distance matches the
distance to the subject in the focus brackets. Choose for manual control of focus or in situa-
tions in which the camera is unable to focus using autofocus (P 36). Intelligent Face Detection
turns off automatically.
Reduce focus
distance
Increase focus
distance
Manual focus
mode icon
Manual focus
indicator
P
49
More on Photography
Focus Mode
1
Use of a tripod is recommended. Focus may be affected if the camera moves.
• If ON is selected for j FOCUS CHECK in the setup menu (P 105), the whole image will be magnified to assist
focus when the focus ring is rotated.
The camera will not focus when the focus ring is rotated all the way to the right. To focus at infinity, focus on a
distant object.
To focus using autofocus, press the AE/AF LOCK button. This can be used to
quickly focus on a chosen subject in manual focus mode.
50
Autofocus Mode
To choose how the camera selects the focus area
when K is selected for focus mode (P 48), press
the AF button and rotate the command dial. Note
that regardless of the option selected, the cam-
era will focus on the subject in the center of the
monitor when macro mode is on (P 38).
CENTER
AF MODE
The following options are available:
r (CENTER): The camera fo-
cuses on the subject in the
center of the frame. This op-
tion can be used with focus
lock.
s (MULTI): When the shutter
button is pressed halfway,
the camera detects high-
contrast subjects near the
center of the frame and se-
lects the focus area automatically.
t (AREA):
The focus position
can be chosen manually by
pressing the selector up,
down, left, or right and press-
ing MENU/OK when the focus
brackets are in the desired position. Choose for
precise focus when the camera is mounted on a
tripod.
x (TRACKING): Position the
subject in the focus target
and press the selector left.
The camera will track the
subject and adjust focus as it
moves through the frame.
250
F
4.5
M
Focus frame
CANCELSET
SELECT AF AREA
Focus target
250
F
4.5
M
START TRACKING
51
More on Photography
Sensitivity
To adjust the camera’s sensitivity to light, press the ISO button and choose from the options below.
100 200 400 800 1600 3200
ISO
100
ISO
Higher values can reduce blur; note, however, that mottling may appear in pictures taken at high sensitivities.
100
ISO
12800
Bright
Scene
Dark
Less noticeable
Noise (mottling)
More noticeable
Option
Option
Description
Description
AUTO Sensitivity is adjusted automatically in response to shooting conditions.
AUTO (3200) / AUTO (1600) / AUTO (800) /
AUTO (400)
As above, except that sensitivity will not be raised above the value in paren-
theses.
12800 / 6400 / 3200 / 1600 / 800 / 400 /
200 / 100
Sensitivity is set to the specified value, which is shown in the display.
a
Sensitivity can also be adjusted in the shooting menu (P 84).
52
For natural colors, press the WB button and choose
a setting that matches the light source.
Option
Option
Description
Description
AUTO White balance adjusted automatically.
h
Measure a value for white balance.
i
For subjects in direct sunlight.
j
For subjects in the shade.
k
Use under “daylight” fluorescent lights.
l
Use under “warm white” fluorescent lights.
m
Use under “cool white” fluorescent lights.
n
Use under incandescent lighting.
h: Custom White Balance
Choose h to adjust white balance for unusual light-
ing conditions. White balance measurement options
will be displayed; frame a white object so that it fills
the LCD monitor and press the shutter button all the
way down to measure white balance.
If “COMPLETED!” is displayed, press MENU/OK to set
white balance to the measured value.
If “UNDER” is displayed, raise exposure compensa-
tion (P 46) and try again.
If “OVER” is displayed, lower exposure compensation
and try again.
a
For greater precision, adjust P FILM SIMULATION,
N ISO, and U DYNAMIC RANGE before measur-
ing white balance.
a
At settings other than h, auto white balance is used
with the flash.
Results vary with shooting conditions. Play pictures
back after shooting to check colors in the LCD moni-
tor.
White Balance
53
More on Photography
The Fn Button
The role played by the Fn button can be selected using the F Fn BUTTON
option in the setup menu (P 102).
The following options are available:
IMAGE SIZE ( P 85)/IMAGE QUALITY ( P 85)/RAW ( P 104)/DYNAMIC RANGE ( P 86)/
FILM SIMULATION (P 86)/FACE DETECTION (P 88)/FACE RECOGNITION (P 88)/
INTELLIGENT DIGITAL ZOOM (P 87)/MOVIE MODE (P 88)/ELECTRONIC LEVEL (P 90)
Fn button
a
The F Fn BUTTON menu can also be displayed by pressing and holding the Fn button.
54
To use Intelligent Face Detec-
tion, press MENU/OK to display
the shooting menu and se-
lect ON for b FACE DETEC-
TION. Faces can be detected
with the camera in vertical
or horizontal orientation; if a
face is detected, it will be indicated by a green bor-
der. If there is more than one face in the frame, the
camera will select the face closest to the center;
other faces are indicated by white borders.
c
In some modes, the camera may set exposure for the
frame as a whole rather than the portrait subject.
If the subject moves as the shutter button is pressed,
their face may not be in the area indicated by the
green border when the picture is taken.
Intelligent Face Detection
Intelligent Face Detection is
recommended when using the
self-timer for group- or self-por-
traits (P 41).
7
77
When a picture taken with Intelligent Face Detec-
tion is displayed, the camera can automatically select
faces for red- eye removal (P 93), p lay bac k zoo m (P 59),
slide shows (P 93), image search (P 63), image disp.
(P 100), printing (P 76), and cropping (P 94).
b Intelligent Face Detection
Intelligent Face Detection allows the camera to automatically detect human faces and set focus and
exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for group
portraits (in horizontal or vertical orientations) to prevent the camera from focusing on the background.
Green border
55
More on Photography
n Face Recognition
The camera can store information on the face
and personal details (name, relationship, and
birth date) of portrait subjects and assign these
subjects priority for Intelligent Face Detection or
display their names and other information during
playback.
Adding New Faces
Adding New Faces
Follow the steps below to add faces to the face
recognition database.
1
Select REGISTER.
Select REGISTER for n FACE RECOGNI-
TION in the shooting menu.
a
To disable face recognition, select OFF.
2
Take a photograph.
After checking that the
subject is facing the cam-
era, frame the subject us-
ing the guides and take
the photograph.
a
If an error is displayed, take the photograph again.
3
Enter face recognition data.
Press MENU/OK to display face recognition
data and enter the following information:
NAME: Enter a name of up to 14 characters
and press MENU/OK.
BIRTHDAY: Enter the subjects date of birth
and press MENU/OK.
CATEGORY: Choose the option that describes
your relationship to the subject and press
MENU/OK.
a
If you attempt to zoom in on the face of a person in-
dicated by a green border in the face recognition da-
tabase on their birthday, the camera will display their
name and the message “Happy Birthday!”.
c
Face recognition may not be available depending on
the shooting mode.
CANCEL
REGISTER FACE
CAPTURE THE FACE
ALONG WITH THE GUIDLINE
56
n Face Recognition
Viewing, Editing, and Deleting Existing Data
Viewing, Editing, and Deleting Existing Data
Follow the steps below to view, edit, or delete
face recognition data.
1
Select VIEW & EDIT for n FACE RECOG-
NITION.
2
Select a face.
3
View or edit face recognition data.
The name, category, or birth date can be ed-
ited as described in Step 3 of “Adding New
Faces (P 55). To retake the photo, select RE-
PLACING IMAGE and shoot a new portrait
as described above.
a
To delete face recognition data for the selected sub-
ject, select ERASE.
Adding Faces Automatically
Adding Faces Automatically
To automatically add frequently-photographed
subjects to the face recognition database, select
ON for AUTO REGISTRATION in the face recog-
nition menu. If the camera detects a face that has
been photographed many times without being
added to the database, it will display a message
prompting you to create a new face recognition
entry. Press MENU/OK and enter face recognition
data.
1
The camera may sometimes fail to recognize new faces
automatically. If necessary, faces can be added manu-
ally using the REGISTER option.
57
More on Photography
n Face Recognition
Face Recognition
The camera can store up to eight faces. If you attempt to add a ninth face, a confirmation dialog will be dis-
played; use VIEW & EDIT to make room for new faces by deleting existing data.
When Intelligent Face Detection (P 54) is on and the frame contains multiple subjects from the face recognition
database, the camera displays the name of the subject that will be used to set focus and exposure (the subject
shown by the green frame). If no name is entered, the camera will show “---”. Subjects identified using face rec-
ognition but not used to set focus and exposure are shown by orange frames, other subjects by white frames.
c
The camera may fail to identify subjects in the face recognition database if they are not facing the camera or
are only partly in the frame, or if details of the subjects’ faces or expressions differ markedly from those in the
database.
58
More on Playback
Playback Options
To view the most recent picture in the monitor,
press the a button.
100-0001
100-0001
1 / 1000
1/1000
F
4.
4.5
F4.5
2
2
-
1
-
1
3
3
Press the selector right to view pictures
in the order recorded, left to view pic-
tures in reverse order. Keep the selector
pressed to scroll rapidly to the desired
frame.
a
Pictures taken using other cameras are indicated by a
m (“gift image”) icon during playback.
Continuous Shooting
Continuous Shooting
In the case of pictures taken in continuous shoot-
ing mode, only the first frame of each series will
be displayed. Press the selector down to view the
other pictures in the series.
I
I
Favorites: Rating Pictures
Favorites: Rating Pictures
To rate the picture currently displayed in full-frame
playback, press DISP/BACK and press the selector
up and down to select from zero to five stars.
More on Playback
59
More on Playback
Playback Options
Playback Zoom
Playback Zoom
Press k to zoom in on pictures displayed in sin-
gle-frame playback; n to zoom out. When the
picture is zoomed in, the selector can be used to
view areas of the image not currently visible in the
display.
Navigation window
shows portion of image
currently displayed in
monitor
Zoom indicator
Press DISP/BACK or MENU/OK to exit zoom.
a
• Rotate the command dial to view other pictures with-
out changing the zoom ratio.
The maximum zoom ratio varies with image size.
Playback zoom is not available with cropped or re-
sized copies saved at a size of a or smaller.
Intelligent Face Detection
Pictures taken with Intelligent Face Detection (P 54)
are indicated by a g icon. Press the g button to
zoom in on the subject selected with Intelligent Face
Detection. You can then use the k and n buttons
to zoom in and out.
60
Playback Options
Multi-Frame Playback
Multi-Frame Playback
To change the number of images displayed, press
n in single-frame view.
Press n to view
more images.
100-0001
100-0001
Press k to view
fewer images.
Use the selector to highlight images and press
MENU/OK to view the highlighted image full frame.
In the nine- and hundred-frame displays, press
the selector up or down to view more pictures.
b Two-Frame Display
Two-frame display can be used
to compare pictures taken in
C mode.
61
More on Playback
A Deleting Pictures
To delete individual pictures, multiple selected pictures, or all pictures,
press MENU/OK, select A ERASE (P 91), and choose from the options be-
low. Note that deleted pictures can not be recovered. Copy important
pictures to a computer or other storage device before proceeding.
Option
Option
Description
Description
FRAME
Press the selector left or right to scroll through pictures and press MENU/OK to delete the current picture
(a confirmation dialog is not displayed).
SELECT FRAMES
Highlight pictures and press MENU/OK to select or deselect (pictures included in the photobook or print
order are shown by S). When the operation is complete, press DISP/BACK to display a confirmation dia-
log, then highlight OK and press MENU/OK to delete the selected pictures.
ALL FRAMES
A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pic-
tures (if a memory card is inserted, only the pictures on the memory card will be affected; the pictures
in internal memory are only deleted if no memory card is inserted). Pressing DISP/BACK cancels deletion;
note that any pictures deleted before the button was pressed can not be recovered.
a
Protected pictures can not be deleted. Remove protection from any pictures you wish to delete (P 94).
If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete the
pictures.
SET
PLAYBACK MENU
ERASE
FRAME
SELECTED FRAMES
ALL FRAMES
BACK
62
Viewing Photo Information
Photo information can be viewed by pressing the
info button.
100-0001
100-0001
12/31/2050
12/31/2050
1 / 1000 F4.5
10:00
AM
10:00
AM
2
-
1
3
3:2
3:2
F
F
200
D-RANGE
COLOR
TONE
METERING
:
200
: STD
: STD
: STD
: PROVIA
: AUTO
: PATTERN
SHARPNESS
WHITE BALANCE
FILM SIM.
PLAYBACK INFORMATION 1
EXPOSURE MODE
LENS
: AUTO
:
4
mm
: F
3.0
:
4
mm
: OFF
FOCAL LENGTH
FLASH MODE
AF INFORMATION 2
a
Use the command dial to view other images.
The active focus point is shown by a “+” icon.
Zooming in on the Focus Point
Press the f button to zoom in
on the focus point. Press DISP/
BACK or MENU/OK to return to full-
frame playback.
63
More on Playback
Image Search
Search for images by various criteria.
1
Press the H button during playback.
2
Highlight one of the following options and
press MENU/OK:
Option
Option
Description
Description
BY DATE
Find all pictures taken on a selected
date.
BY FACE
Find all pictures based on specified face
information.
BY I FAVORITES
Find all pictures with a specified rating
(P 58).
BY SCENE
Find all pictures that match a selected
scene.
BY TYPE OF DATA
Find all still pictures, all movies, all pic-
tures taken in burst mode, or all RAW
pictures.
BY UPLOAD MARK
Find all pictures selected for upload to a
specified destination (P 92).
3
Select a search condition. Only pictures that
match the search condition will be displayed.
To delete or protect selected pictures or to
view the selected pictures in a slide show,
press MENU/OK and choose from the following
options:
Option
Option
See page
See page
A ERASE 61
D PROTECT 94
I
SLIDE SHOW 93
64
Create books from your favorite photos.
Creating a PhotoBook
Creating a PhotoBook
X PhotoBook Assist
1
Select X PHOTOBOOK ASSIST in the play-
back menu.
2
Highlight NEW BOOK.
3
Press MENU/OK to display the new
book dialog.
4
Choose pictures for the new book.
SELECT FROM ALL: Choose from all the
pictures available.
SELECT BY IMAGE SEARCH:
Choose from pictures
matching selected search conditions (P 63).
a
Neither photographs a or smaller nor movies can
be selected for photobooks.
5
Scroll through the images and press the selec-
tor up to select or deselect the current image
for inclusion in the book. To display the current
image on the cover, press the selector down.
a
The first picture selected automatically becomes
the cover image. Press the selector down to select
a different picture for the cover.
6
Press MENU/OK to exit when the book
is complete.
7
Highlight COMPLETE PHOTOBOOK.
EXIT
SELECT IMAGES FOR PHOTOBOOK
SELECT ALL
COMPLETE PHOTOBOOK
a
Choose SELECT ALL to select all photos, or all pho-
tos matching the specified search conditions, for
the book.
65
More on Playback
k PhotoBook Assist
8
Press MENU/OK. The new book will be
added to the list in the photobook
assist menu.
c
Photobooks can contain up to 300 pictures.
Books that contain no photos are automatically
deleted.
PhotoBooks
Photobooks can be copied to a computer using the
supplied MyFinePix Studio software.
Viewing PhotoBooks
Viewing PhotoBooks
Highlight a book in the photobook assist menu
and press MENU/OK to display the book, then press
the selector left and right to scroll through the
pictures. Press DISP/BACK to return to the photo-
book assist menu.
Editing and Deleting PhotoBooks
Editing and Deleting PhotoBooks
1
Display the photobook and press
MENU/OK to view book edit options.
2
Choose from the following options:
EDIT: Edit the book as described in “Creating a
PhotoBook” on page 64.
ERASE: Delete the current photobook.
3
Follow the on-screen instructions.
66
If you press the selector down when a panorama is displayed full frame, the camera will play back the
picture from left to right or from bottom to top.
PLAY
STOP
PAUSE
The following operations can be performed during playback:
Operation
Operation
Button
Button
Description
Description
Start/pause
playback
Press the selector down to start playback. Press again to pause.
End playback
Press the selector up to end playback.
a
Once displayed in full-frame playback, panoramas can be zoomed in or out using the zoom buttons.
z panoramas play back in an endless loop (
P 31); the playback direction can be controlled by pressing the
selector left or right. The camera will not turn off automatically while playback is in progress (P 102).
Viewing Panoramas
67
Movies
Recording Movies
Press z to shoot a movie. During recording, the following indicators will be displayed and sound will
be recorded via the built-in microphone (be careful not to cover the microphone during recording).
1
1
REC
999m59s
999m59s
F
F
Number of photos that
can be taken during
recording
Time remaining
y REC icon
To end recording, press the z button again. Recording ends automatically when the movie reaches
maximum length or memory is full.
a
Zoom can be adjusted while recording is in progress.
If the subject is poorly lit, the AF-assist lamp may light to assist the focus operation.
To turn the AF-assist lamp off, select OFF for C AF ILLUMINATOR in the setup menu (P 103).
Exposure and white balance are adjusted automatically throughout recording. The color and brightness of the
image may vary from that displayed before recording begins.
Sounds made by the camera may be recorded.
Movies
68
Taking Photographs during Recording
Press the shutter button to take a photograph during
recording.
a
See page 88 for information on choosing how photo-
graphs are recorded.
The photo is saved separately from the movie and
does not appear as part of the movie.
c
Photos can not be taken while a high-speed movie
is being recorded.
The number of photos that can be taken is limited.
c
The indicator lamp lights while movies are being re-
corded. Do not open the battery chamber during
shooting or while the indicator lamp is lit. Failure
to observe this precaution could prevent the movie
from being played back.
• Vertical or horizontal streaks may appear in movies
containing very bright subjects. This is normal and
does not indicate a malfunction.
The temperature of the camera may rise if it is used to
record movies for an extended period or if the ambi-
ent temperature is high. This is normal and does not
indicate a malfunction.
Movie Frame Size
Movie Frame Size
Before recording, select a frame size using the
W MOVIE MODE option in the shooting menu
(P 88).
Option
Option
Description
Description
i 1920 (1920 × 1080)
Full HD (High Definition).
h 1280 (1280 × 720)
High Definition.
f (640 × 480)
Standard definition.
Y 640 × 480 (80fps)
High speed movie. Sound is not
recorded, and focus, exposure,
and white balance are not ad-
justed automatically. Black bands
appear at the top and bottom of
movies recorded at Y 320 × 112.
Y 320 × 240 (160fps)
Y 320 × 112 (320fps)
Recording Movies
69
Movies
a Viewing Movies
During playback (P 58), movies
are displayed in the monitor as
shown at right. The following
operations can be performed
while a movie is displayed:
100-006
100-006
PLAY
Operation
Operation
Description
Description
Start/
pause
playback
Press the selector down to start playback.
Press again to pause. While playback is
paused, you can press the selector left or
right to rewind or advance one frame at
a time.
End
playback
Press the selector up to end playback.
Adjust
speed
Press the selector left or right to adjust play-
back speed during playback.
Adjust
volume
Press MENU/OK to pause playback and dis-
play volume controls. Press the selector
up or down to adjust the volume and
press MENU/OK to exit. Volume can also be
adjusted from the setup menu.
Playback Speed
Press the selector left or right to
adjust playback speed. Speed is
shown by the number of arrows
(M or N).
STOP PAUSE
5m42s
5m42s
Arrow
b Viewing Movies on a Computer
Copy movies to the computer before viewing.
c
Do not cover the speaker during playback.
70
Connections
Viewing Pictures on TV
Connect the camera to a TV to show pictures to a group.
1
Turn the camera off.
2
Connect the camera using the supplied A/V cable or an HDMI cable available from third party sup-
pliers.
Insert into A/V
cable connector
Connect white plug
to audio-in jack
Connect yellow plug
to video-in jack
Insert into HDMI
connector
Insert into HDMI
connector
HDMI Mini connector
HDMI
An HDMI cable (available from third-party suppliers; P 107) can be used to connect the camera to High Defini-
tion (HD) devices (playback only). The USB cable or optional A/V cable cannot be used while an HDMI cable
is connected.
Connections
71
Connections
Viewing Pictures on TV
3
Tune the television to the video or HDMI input channel. See the documentation supplied with the
television for details.
4
Turn the camera on and press the a button. The camera monitor turns off and pictures and mov-
ies are played back on the TV. Note that the camera volume controls have no effect on sounds
played on the TV; use the television volume controls to adjust the volume.
a
Image quality drops during movie playback.
c
When connecting the cable, be sure the connectors are fully inserted.
72
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without first being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.
Connecting the Camera
Connecting the Camera
1
Connect the supplied USB cable as shown and
turn the printer on.
2
Turn the camera on. t USB will be displayed
in the monitor, followed by the PictBridge dis-
play shown below at right.
USB
00
OK
FRAME
TOTAL:
00000
SHEETS
PICTBRIDGE
SET
Printing Selected Pictures
Printing Selected Pictures
1
Press the selector left or right to display a pic-
ture you wish to print.
2
Press the selector up or down to choose the
number of copies (up to 99).
3
Repeat steps 12 to select additional pictures.
Press MENU/OK to display a confirmation dialog
when settings are complete.
PRINT THESE FRAMES
TOTAL:
9
SHEETS
YES CANCEL
4
Press MENU/OK to start printing.
73
Connections
Printing Pictures via USB
b Printing the Date of Recording
To print the date of recording on pictures, press DISP/
BACK in steps 12 to display the PictBridge menu (see
“Printing the DPOF Print Order,” below). Press the se-
lector up or down to highlight PRINT WITH DATE s
and press MENU/OK to return to the PictBridge display
(to print pictures without the date of recording, select
PRINT WITHOUT DATE).
a
If no pictures are selected when the MENU/OK button is
pressed, the camera will print one copy of the current
picture.
Printing the DPOF Print Order
Printing the DPOF Print Order
To print the print order created with K PRINT
ORDER (DPOF) in the playback menu (P 97):
1
In the PictBridge display, press DISP/BACK to
open the PictBridge menu.
PICTBRIDGE
PRINT DPOF
PRINT WITH DATE
PRINT WITHOUT DATE
2
Press the selector up or down to highlight
u PRINT DPOF.
3
Press MENU/OK to display a confirmation dialog.
PRINT DPOF OK?
TOTAL:
9
SHEETS
YES CANCEL
74
Printing Pictures via USB
4
Press MENU/OK to start printing.
During Printing
The message shown at right
is displayed during printing.
Press DISP/BACK to cancel be-
fore all pictures are printed
(depending on the printer,
printing may end before the
current picture has printed).
If printing is interrupted, turn the camera off and then
on again.
PRINTING
CANCEL
Disconnecting the Camera
Confirm that “PRINTING” is not displayed in the moni-
tor and turn the camera off. Disconnect the USB
cable.
a
• Pictures can be printed from internal memory or a
memory card that has been formatted in the camera.
If the printer does not support date printing, the
PRINT WITH DATE s option will not be available in
the PictBridge menu and the date will not be printed
on the pictures in the DPOF print order.
When pictures are printed via direct USB connection,
page size, print quality, and border selections are
made using the printer.
75
Connections
Printing Pictures via USB
The K PRINT ORDER (DPOF) option in the
playback menu can be used to create a digital
print order” for PictBridge-compatible printers
(P 107) or devices that support DPOF.
DPOF
DPOF (Digital Print Order Format) is a stan-
dard that allows pictures to be printed from
“print orders” stored in internal memory or
on a memory card. The information in the
order includes the pictures to be printed, date im-
print, and the number of copies of each picture.
WITH DATE
WITH DATE s
/ WITHOUT DATE
/ WITHOUT DATE
1
Select playback mode and press MENU/OK to
display the playback menu.
2
Highlight K PRINT ORDER (DPOF) and press
MENU/OK.
3
Highlight one of the following options and
press MENU/OK:
WITH DATE s: Print the date of recording on
pictures.
WITHOUT DATE: Do not print the date of record-
ing on pictures.
4
Press the selector left or right to display a pic-
ture you wish to include in or remove from the
print order.
Creating a DPOF Print Order
Creating a DPOF Print Order
76
Printing Pictures via USB
5
Press the selector up or down to choose the
number of copies (up to 99). To remove a pic-
ture from the order, press the selector down
until the number of copies is 0.
Total number of prints
Number of copies
SHEETS
DPOF:
00001
01
PRINT ORDER
(
DPOF
)
SET
FRAME
b Intelligent Face Detection
If the current picture was created with Intelligent
Face Detection, pressing g sets the number of
copies to the number of faces detected.
a
When pictures are printed via direct USB connec-
tion, page size, print quality, and border selections
are made using the printer.
6
Repeat steps 4–5 to complete the print order.
Press MENU/OK to save the print order when set-
tings are complete, or DISP/BACK to exit without
changing the print order.
7
The total number of prints is displayed in the
monitor. Press MENU/OK to exit.
The pictures in the current
print order are indicated by a
u icon during playback.
77
Connections
Printing Pictures via USB
a
Remove the memory card to create or modify a print
order for the pictures in internal memory.
Print orders can contain a maximum of 999 pictures.
If a memory card is inserted
containing a print order cre-
ated by another camera, the
message shown at right will
be displayed. Pressing MENU/
OK cancels the print order; a
new print order must be created as described above.
RESET ALL
RESET ALL
To cancel the current print
order, select RESET ALL
in the K PRINT ORDER
(DPOF) menu. The confir-
mation shown at right will
be displayed; press MENU/OK to remove all pictures
from the order.
RESET DPOF OK?
YES NO
RESET DPOF OK?
YES CANCEL
78
Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where they can be stored, viewed,
organized, and printed. Before proceeding, install the software as described below. Do NOT connect the
camera to the computer until installation is complete.
Windows: Installing MyFinePix Studio
Windows: Installing MyFinePix Studio
1
Confirm that the computer meets the following system requirements:
Windows 7 (SP 1)/Windows Vista (SP 2)
Windows 7 (SP 1)/Windows Vista (SP 2)
1
1
Windows XP (SP 3)
Windows XP (SP 3)
1
1
CPU
CPU
3 GHz Pentium 4 or better
(2.4 GHz Core 2 Duo or better)
2
2 GHz Pentium 4 or better
(2.4 GHz Core 2 Duo or better)
2
RAM
RAM 1 GB or more
512 MB or more
(1 GB or more)
2
Free disk space
Free disk space 2 GB or more
GPU
GPU
Supports DirectX 9 or later
(recommended)
Supports DirectX 7 or later
(required; performance not guaranteed with other GPUs)
Video
Video 1,024 × 768 pixels or more with 24-bit color or better
Other
Other
Built-in USB port recommended. Operation is not guaranteed with other USB ports.
.NET Framework 3.5 Service Pack 1 required when uploading images or using Map Viewer.
Internet connection (broadband recommended) required to install .NET Framework (if necessary), to use
auto update feature, and when performing such tasks as sharing pictures on-line or via e-mail.
1 Other versions of Windows are not supported. Only pre-installed operating systems are supported; operation is not
guaranteed on home-built computers or computers that have been upgraded from earlier versions of Windows.
2 Recommended when displaying HD movies.
79
Connections
Viewing Pictures on a Computer
2
Start the computer. Log in to an account with administrator privileges before proceeding.
3
Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control dialog will then be displayed;
click Yes (Windows 7) or Allow (Windows Vista).
The installer will start automatically; click Install MyFinePix Studio and follow the on-screen in-
structions to install MyFinePix Studio and RAW FILE CONVERTER.
If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer from the Start menu, then
double-click the FINEPIX CD icon to open the FINEPIX CD window and double-click setup or SETUP.EXE.
4
If prompted to install Windows Media Player or DirectX, follow the on-screen instructions to com-
plete installation.
5
Remove the installer CD from the CD-ROM drive when installation is complete. Store the installer
CD in a dry location out of direct sunlight in case you need to re-install the software.
Installation is now complete. Proceed to “Connecting the Camera” on page 82.
80
Viewing Pictures on a Computer
Macintosh: Installing FinePixViewer
Macintosh: Installing FinePixViewer
1
Confirm that the computer meets the following system requirements:
CPU
CPU PowerPC or Intel (Core 2 Duo or better) *
OS
OS
Pre-installed versions of Mac OS X version 10.3.9–10.6
(visit http://www.fujifilm.com/support/digital_cameras/compatibility/ for more information)
Mac OS X version 10.7 and later not supported.
RAM
RAM 256 MB or more (1 GB or more) *
Free disk space
Free disk space A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running
Video
Video 800 × 600 pixels or more with thousands of colors or better
Other
Other Built-in USB port recommended. Operation is not guaranteed with other USB ports.
* Recommended when displaying HD movies.
2
After starting the computer and quitting any applications that may be running, insert the installer
CD in a CD-ROM drive and double-click Installer for Mac OS X.
a
To install RAW FILE CONVERTER, double-click SILKYRFCEXInstaller. RAW FILE CONVERTER is used to view
RAW images on your computer.
3
An installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter an
administrator name and password when prompted and click OK, then follow the on-screen instruc-
tions to install FinePixViewer. Click Exit to quit the installer when installation is complete.
81
Connections
Viewing Pictures on a Computer
4
Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD
if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry
location out of direct sunlight in case you need to re-install the software.
5
Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture, and select Preferences
from the Image Capture application menu. The Image Capture preferences dialog will be displayed;
choose Other in the When a camera is connected, open menu, then select FPVBridge in the
Applications/FinePixViewer” folder and click Open. Quit Image Capture.
Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications” folder and start Image
Capture. The camera will be listed under DEVICES; select the camera and choose FPVBridge from
the Connecting this camera opens menu and click Choose. Quit Image Capture.
Installation is now complete. Proceed to “Connecting the Camera” on page 82.
82
Viewing Pictures on a Computer
1
If the pictures you wish to copy are stored on a
memory card, insert the card into the camera
(P 12).
a
Windows users may require the Windows CD when
starting the software for the first time.
c
Loss of power during transfer could result in loss of
data or damage to internal memory or the memory
card. Charge the battery before connecting the
camera.
2
Turn the camera off and connect the supplied
USB cable as shown, making sure the connec-
tors are fully inserted. Connect the camera di-
rectly to the computer; do not use a USB hub
or keyboard.
3
Turn the camera on and follow the on-screen
instructions to copy pictures to the computer.
To exit without copying pictures, click Cancel.
For more information on using the supplied soft-
ware, start the application and select the appro-
priate option from the Help menu.
Connecting the Camera
Connecting the Camera
83
Connections
Viewing Pictures on a Computer
c
If a memory card containing a large number of images
is inserted, there may be a delay before the software
starts and you may be unable to import or save im-
ages. Use a memory card reader to transfer pictures.
Make sure that the computer does not display a mes-
sage stating that copying is in progress and that the
indicator lamp is out before turning the camera off or
disconnecting the USB cable (if the number of imag-
es copied is very large, the indicator lamp may remain
lit after the message has cleared from the computer
display). Failure to observe this precaution could re-
sult in loss of data or damage to internal memory or
the memory card.
Disconnect the camera before inserting or removing
memory cards.
I n s om e c as es, it may not b e p os sible to access pi ctur es
saved to a network server using the supplied software
in the same way as on a standalone computer.
The user bears all applicable fees charged by the
phone company or Internet service provider when
using services that require an Internet connection.
Disconnecting the Camera
After confirming that the indicator lamp is out, follow
the on-screen instructions to turn the camera off and
disconnect the USB cable.
Uninstalling the Supplied Software
Only uninstall the supplied software when it is no lon-
ger required or before beginning reinstallation. After
quitting the software and disconnecting the camera,
drag the “FinePixViewer” folder from “Applications”
into the Trash and select Empty Trash in the Finder
menu (Macintosh), or open the control panel and use
“Programs and Features” (Windows 7/Windows Vista)
or “Add or Remove Programs” (Windows XP) to unin-
stall MyFinePix Studio. Under Windows, one or more
confirmation dialogs may be displayed; read the con-
tents carefully before clicking OK.
84
Menus
Using the Menus: Shooting Mode
Use the shooting menus to adjust shooting set-
tings. The options available vary with the shoot-
ing mode selected.
Using the Shooting Menu
Using the Shooting Menu
1
Press MENU/OK to display the shoot-
ing menu.
2
Press the selector up or down to
highlight the desired menu item.
3
Press the selector right to display op-
tions for the highlighted item.
4
Press the selector up or down to
highlight the desired option.
5
Press MENU/OK to select the high-
lighted option.
6
Press DISP/BACK to exit from the
menu.
Shooting Menu Options
Shooting Menu Options
Default values are shown in square brackets [ ].
A
A
E
E
MODE [
MODE [
R
R
]
]
Choose an option for E mode (P 23).
A
A
Adv.
Adv.
MODE [
MODE [
i
i
]
]
Choose an advanced shooting mode (P 24).
A
A
SCENE POSITION
SCENE POSITION
[
[
SP1:
SP1:
L
L
] [
] [
SP2:
SP2:
M
M
]
]
Choose a scene for SP1/SP2 mode (P 28).
N
N
ISO [AUTO (800)]
ISO [AUTO (800)]
Control the camera’s sensitivity to light (P 51).
Menus
85
Menus
Using the Menus: Shooting Mode
O
O
IMAGE SIZE [
IMAGE SIZE [
O
O
4 : 3
4 : 3
]
]
Choose the image size and
aspect ratio at which pictures
are recorded. Large pictures
can be printed at large sizes with no drop in qual-
ity, while small pictures require less memory, al-
lowing more pictures to be recorded.
Size Versus Aspect Ratio
Size
Size
Option
Option
Prints at sizes up to
Prints at sizes up to
O
34 × 25 cm (13.5 × 10 in.)
P
24 × 18 cm (9.5 × 7 in.)
Q
17 × 13 cm (7 × 5 in.)
Aspect ratio
Aspect ratio
4 : 3: Pictures have
the same propor-
tions as the cam-
era display.
4
3
3 : 2: Pictures have
the same propor-
tions as a frame of
35 mm film.
3
2
16 : 9: Suited for
display on High
Definition (HD) de-
vices.
16
9
T
T
IMAGE QUALITY [FINE]
IMAGE QUALITY [FINE]
Choose how much image files are compressed.
Option
Option
Description
Description
FINE
FINE
Low compression. Select for higher image
quality.
NORMAL
NORMAL
High compression. Select this option to
store more pictures.
Aspect ratio
O 4 : 3
Size
86
Using the Menus: Shooting Mode
U
U
DYNAMIC RANGE [AUTO]
DYNAMIC RANGE [AUTO]
Control contrast. Higher values are recommend-
ed for scenes that include both sunlight and deep
shade or for increased contrast with such subjects
as sunlight on water, brightly-lit autumn leaves,
portraits taken against a blue sky, and white ob-
jects or people wearing white; note, however, that
mottling may appear in pictures taken at higher
values. If AUTO is selected, the camera will auto-
matically select values between 100% and 400%
in response to shooting conditions.
Option
Option
Description
Description
AUTO
AUTO
A
A
100%
100%
Increase contrast when shooting
indoors or under overcast skies.
Reduce loss of detail in highlights
and shadows when photograph-
ing high-contrast scenes.
B
B
200%
200%
C
C
400%
400%
D
D
800%
800%
M
M
1600%
1600%
a
M 1600% and D 800% are available only when
D-RANGE PRIORITY is selected in E mode.
P
P
FILM SIMULATION [
FILM SIMULATION [
c
c
]
]
Simulate the effects of different types of film, in-
cluding sepia and black-and-white.
Option
Option
Description
Description
c
c
PROVIA/
PROVIA/
STANDARD
STANDARD
Standard color reproduction. Suited to a
wide range of subjects, from portraits to
landscapes.
d
d
Velvia/
Velvia/
VIVID
VIVID
A high-contrast palette of saturated col-
ors, suited to nature photographs.
e
e
ASTIA/
ASTIA/
SOFT
SOFT
A soft-toned palette of less saturated col-
ors.
b
b
B&W
B&W
Take pictures in black and white.
f
f
SEPIA
SEPIA
Take pictures in sepia.
87
Menus
Using the Menus: Shooting Mode
d
d
WB SHIFT
WB SHIFT
White balance can be fine-tuned. Adjust the se-
lected color axis (R–Cy=Red-Cyan or B-Ye=Blue–
Yellow) by +3 to –3 in increments of one.
f
f
COLOR [MID]
COLOR [MID]
Adjust color density (HIGH/MID/LOW).
e
e
TONE [STD]
TONE [STD]
Adjust contrast (HARD/STD/SOFT).
q
q
SHARPNESS [STD]
SHARPNESS [STD]
Choose whether to sharpen or soften outlines
(HARD/STD/SOFT).
h
h
NOISE REDUCTION [STD]
NOISE REDUCTION [STD]
Choose the amount of noise reduction (HIGH/
STD/LOW).
y
y
INTELLIGENT SHARPNESS [OFF]
INTELLIGENT SHARPNESS [OFF]
Select ON to process photos digitally for sharp,
super high-resolution results.
a
The time needed to record images increases.
The effects are not visible in the display during shoot-
ing.
Intelligent sharpness may turn off automatically in
some modes.
This option has no effect on photos taken in continu-
ous mode.
R
R
INTELLIGENT DIGITAL ZOOM [OFF]
INTELLIGENT DIGITAL ZOOM [OFF]
Intelligent digital zoom can be used to magnify
the image by 1.4× or 2× while processing it for
sharp, high-resolution results.
a
• Intelligent digital zoom may end when another mode
is selected.
• Intelligent digital zoom may sometimes produce low-
er quality images than optical zoom.
The time needed to record images increases.
The effects are not visible in the display during shoot-
ing.
Intelligent digital zoom is not available in continuous
mode or during movie recording.
89
Menus
Using the Menus: Shooting Mode
J
J
AE BKT EV STEPS
AE BKT EV STEPS
1
/
3
]
]
Choose the size of the exposure bracketing incre-
ment used when O (AE bracketing) is selected in
continuous shooting mode (P 45).
Choose from increments of ±
1
/
3 EV, ±
2
/
3 EV, and
±1 EV (note that the camera may not be able to
use the selected bracketing increment if the
amount of over- or under- exposure exceeds the
limits of the exposure metering system).
I
I
FLASH [±0]
FLASH [±0]
Adjust flash brightness. Choose from values be-
tween +
2
/
3 EV and –
2
/
3 EV. The default setting is ±0.
Note that the desired results may not be achieved
depending on shooting conditions and the dis-
tance to the subject.
g
g
EXTERNAL FLASH [OFF]
EXTERNAL FLASH [OFF]
Choose ON when using an optional flash unit (ex-
cept Fujifilm products) mounted on the camera
hot shoe.
c
• The flash may not fully light the subject at speeds
faster than
1
/
1000 s.
Use auto or custom white balance (P 52).
If the built-in flash is raised when ON is selected for
g EXTERNAL FLASH, the built-in flash will fire once
to provide a signal for the optional flash unit to fire.
• External flash units can be used in P, S, A, M or O
(S and T only) modes.
• Fujifilm external flash units do not require this setting.
a
The camera can be used with flash units that provide
aperture adjustment, external metering, and sensitiv-
ity control. Some flash units that are designed spe-
cifically for other cameras can not be used.
• For information on Fujifilm external flash units, see
Accessories from FUJIFILM (P 108).
90
Using the Menus: Shooting Mode
K
K
CUSTOM SET
CUSTOM SET
Save settings for P, S, A, M and all O modes
except R (P 35).
2
2
ELECTRONIC LEVEL [OFF]
ELECTRONIC LEVEL [OFF]
This option is useful to correct
for camera tilt. When ON is
selected, 2 lines are displayed
across the screen as shown. If
the lines stay perfectly over-
lapped, the camera is leveled.
91
Menus
Using the Menus: Playback Mode
Using the Playback Menu
Using the Playback Menu
1
Press the a button to enter play-
back mode.
2
Press MENU/OK to display the play-
back menu.
3
Press the selector up or down to
highlight the desired menu item.
4
Press the selector right to display op-
tions for the highlighted item.
5
Press the selector up or down to
highlight the desired option.
6
Press MENU/OK to select the high-
lighted option.
7
Press DISP/BACK to exit from the
menu.
Playback Menu Options
Playback Menu Options
X
X
PHOTOBOOK ASSIST
PHOTOBOOK ASSIST
Create books from your favorite photos (P 64).
x
x
ERASE
ERASE
Delete all or selected pictures (P 61).
92
Using the Menus: Playback Mode
j
j
MARK FOR UPLOAD TO
MARK FOR UPLOAD TO
Select pictures for upload to YouTube or Face-
book using MyFinePix Studio (Windows only).
Selecting Pictures for Upload
Selecting Pictures for Upload
1
Select YouTube to choose movies for upload
to YouTube, FACEBOOK to choose photos and
movies for upload to Facebook.
2
Press the selector left or right to display pic-
tures and press MENU/OK to select or deselect.
Press DISP/BACK to exit when all the desired pic-
tures are selected.
a
Only movies can be selected for upload to YouTube.
• During playback, selected pictures are indicated by
j YouTube or j FACEBOOK icons.
RESET ALL: Deselecting All Pictures
RESET ALL: Deselecting All Pictures
Choose RESET ALL to deselect all pictures. If the
number of pictures affected is very large, a mes-
sage will be displayed while the operation is in
progress. Press DISP/BACK to exit before the opera-
tion is complete.
Uploading Pictures (Windows Only)
Uploading Pictures (Windows Only)
Selected pictures can be uploaded using the
YouTube/Facebook Upload option in MyFinePix
Studio.
Select with camera
Upload from computer
For information on installing MyFinePix Studio
and connecting the camera to a computer, see
Viewing Pictures on a Computer” (P 78).
93
Menus
Using the Menus: Playback Mode
I
I
SLIDE SHOW [MULTIPLE]
SLIDE SHOW [MULTIPLE]
View pictures in an automated slide show. Choose
the type of show and press MENU/OK to start.
Press DISP/BACK at any time during the show to
view on-screen help. The show can be ended at
any time by pressing MENU/OK.
Option
Option
Description
Description
NORMAL
NORMAL
Press selector left or right to go back or
skip ahead one frame. Select FADE-IN
for fade transitions between frames.
FADE-IN
FADE-IN
NORMAL
NORMAL
g
g
As above, except that camera automati-
cally zooms in on faces selected with In-
telligent Face detection.
FADE-IN
FADE-IN
g
g
MULTIPLE
MULTIPLE Display several pictures at once.
a
The camera will not turn off automatically while a slide
show is in progress.
B
B
RED EYE REMOVAL
RED EYE REMOVAL
If the current picture is marked with a g icon to
indicate that it was taken with Intelligent Face De-
tection, this option can be used to remove red-
eye. The camera will analyze the image; if red-eye
is detected, the image will be processed to create
a copy with reduced red-eye.
1
Display the desired picture.
2
Select B RED EYE REMOVAL in the playback
menu.
3
Press MENU/OK.
a
Red-eye may not be removed if the camera is unable
to detect a face or the face is in profile. Results may
differ depending on the scene. Red-eye can not be
removed from pictures that have already been pro-
cessed using red-eye removal or pictures created
with other devices.
• The amount of time needed to process the image
varies with the number of faces detected.
Copies created with B RED EYE REMOVAL are indi-
cated by a e icon during playback.
94
Using the Menus: Playback Mode
D
D
PROTECT
PROTECT
Protect pictures from accidental deletion.
1
Select D PROTECT in the playback menu.
2
Highlight one of the following options and
press MENU/OK:
FRAME: Protect selected pictures. Press the
selector left or right to view pictures and
press MENU/OK to select or deselect. Press
DISP/BACK when the operation is complete.
SET ALL: Protect all pictures.
RESET ALL: Remove protection from all pic-
tures.
c
Protected pictures will be deleted when the memory
card or internal memory is formatted (P 100).
G
G
CROP
CROP
Create a cropped copy of the current picture.
1
Display the desired picture.
2
Select G CROP in the playback menu.
3
Use the k and n buttons to zoom the image
in and out and use the selector to scroll the
picture until the desired portion is displayed.
4
Press MENU/OK to display a confirmation dialog.
5
Press MENU/OK again to save the cropped copy
to a separate file.
a
Larger crops produce larger copies; all copies have an
aspect ratio of 4 : 3. If the size of the final copy will be
a, OK will be displayed in yellow.
b Intelligent Face Detection
If the picture was shot with Intelligent Face Detection
(P 54), g will be displayed in the monitor. Press the g
button to zoom in on the selected face.
96
Using the Menus: Playback Mode
E
E
COPY
COPY
Copy pictures from internal memory to a memory
card.
1
Select E COPY in the playback menu.
2
Highlight one of the following options and
press the selector right:
a INTERNAL MEMORY y b CARD: Copy pic-
tures from internal memory to a memory
card.
b CARD y a INTERNAL MEMORY: Copy pic-
tures from a memory card to internal mem-
ory.
3
Highlight one of the following options and
press MENU/OK:
FRAME: Copy selected pictures. Press the se-
lector left or right to view pictures and press
MENU/OK to copy the current picture.
ALL FRAMES: Copy all pictures.
a
Copying ends when the destination is full.
DPOF print information is not copied (P 75).
F
F
VOICE MEMO
VOICE MEMO
Add a voice memo to the current photograph.
Holding the camera at a distance of about 20 cm,
face the microphone and press MENU/OK to begin
recording. Press MENU/OK again to end recording
(recording ends automatically after 30 seconds).
a
Voice memos can not be added to movies or protect-
ed pictures. Remove protection from pictures before
recording voice memos.
If a voice memo already exists for the current picture,
the options will be displayed. Select RE-REC to re-
place the existing memo.
Playing Voice Memos
Pictures with voice memos are indicated by a q icon
during playback. To play the voice memo back, select
PLAY for F VOICE MEMO in the playback menu.
a
• The camera may not play voice memos recorded
with other devices.
Do not cover the speaker during playback.
97
Menus
Using the Menus: Playback Mode
n
n
ERASE FACE RECOG.
ERASE FACE RECOG.
Remove face recognition links from the current
image. When this option is selected, the camera
will zoom in on an area in the current picture that
it has matched with a face in the face recognition
database. If the match is not correct, press MENU/
OK to remove the link to the face recognition da-
tabase.
a
Face recognition links can not be removed from copies
with a size of a or smaller.
K
K
PRINT ORDER (DPOF)
PRINT ORDER (DPOF)
Select pictures for printing on DPOF- and Pict-
Bridge-compatible devices (P 73).
J
J
DISP. ASPECT [4 : 3]
DISP. ASPECT [4 : 3]
Choose how High Definition (HD) devices display
pictures with an aspect ratio of 4 : 3 (this option is
available only when an HDMI cable is connected).
Select 16 : 9 to display the image so that it fills the
screen with its top and bottom cropped out, 4 : 3
to display the entire image with black bands at
either side.
16 : 9
16 : 9
4 : 3
4 : 3
a
Photographs with an aspect ratio of 16 : 9 are displayed
full screen, those with an aspect ratio of 3 : 2 in a black
frame.
98
1
Display the setup menu.
1.1 Press MENU/OK to display the
menu for the current mode.
1.2 Press the selector left to high-
light a left tab.
1.3 Press the selector up or down
to select 4.
The setup menu appears.
EXIT
SET
SET-UP
SET
Tab
2
Adjust settings.
2.1 Press the selector right to acti-
vate the setup menu.
2.2 Press the selector up or down
to highlight a menu item.
2.3 Press the selector right to dis-
play options for the highlighted
item.
2.4 Press the selector up or down
to highlight an option.
2.5 Press MENU/OK to select the
highlighted option.
2.6 Press DISP/BACK to exit from the
menu.
The Setup Menu
Using the Setup Menu
Using the Setup Menu
99
Menus
The Setup Menu
Default values are shown in square brackets [ ].
F
F
DATE/TIME
DATE/TIME
Set the camera clock (P 16).
N
N
TIME DIFFERENCE [
TIME DIFFERENCE [
h
h
]
]
Switch the camera clock instantly from your
home time zone to the local time at your desti-
nation when traveling. To specify the difference
between local time and your home time zone:
1
Highlight g LOCAL and press the selector
right.
2
Use the selector to choose the time difference
between local time and your home time zone.
3
Press MENU/OK.
To switch between local time and your home
time zone, highlight g LOCAL or h HOME and
press MENU/OK.
Option
Option
Description
Description
h
h
HOME
HOME
Switch to the time currently selected
for F DATE/TIME (see above).
g
g
LOCAL
LOCAL
Switch to local time. If this option is
selected, g and the time and date
will be displayed in yellow for three
seconds each time the camera is
turned on.
L
L
a
Choose a language.
o
o
SILENT MODE [OFF]
SILENT MODE [OFF]
Select ON to disable the speaker, flash, and AF-
assist illuminator in situations in which camera
sounds or lights may be unwelcome (note that
the flash will still fire in C mode).
Setup Menu Options
Setup Menu Options
100
The Setup Menu
R
R
RESET
RESET
Reset all settings except F DATE/TIME, N TIME
DIFFERENCE, O BACKGROUND COLOR, and
Q VIDEO SYSTEM to default values.
1
Highlight R RESET and press the selector
right to display a confirmation dialog.
2
Highlight OK and press MENU/OK.
K
K
FORMAT
FORMAT
If a memory card is inserted in the camera, this
option will format the memory card. If no memo-
ry card is inserted, this option will format internal
memory.
c
All data—including protected pictures—will be de-
leted from the memory card or internal memory. Be
sure important files have been copied to a computer
or other storage device.
Do not open the battery-chamber cover during for-
matting.
A
A
IMAGE DISP. [1.5 SEC]
IMAGE DISP. [1.5 SEC]
Choose how long pictures are displayed in the
LCD monitor after shooting.
Option
Option
Description
Description
3 SEC
3 SEC
Pictures are displayed for three sec-
onds (3 SEC) or 1.5 seconds (1.5 SEC).
Colors may differ slightly from those
in the final image.
1.5 SEC
1.5 SEC
ZOOM
ZOOM
(CONTINUOUS)
(CONTINUOUS)
Pictures are displayed until the MENU/
OK button is pressed.
OFF
OFF
Pictures are not displayed after
shooting.
126
Specifications
Color Television Systems
NTSC (National Television System Committee) is a color television telecasting specification adopted mainly in the
U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly in European
countries and China.
Notices
• Specifications subject to change without notice; for the latest information, visit http://www.fujifilm.com/products/
digital_cameras/index.html. FUJIFILM shall not be held liable for damages resulting from errors in this manual.
• Although the monitor is manufactured using advanced high-precision technology, small bright points and
anomalous colors (particularly in the vicinity of text) may appear. This is normal for this type of monitor and
does not indicate a malfunction; images recorded with the camera are unaffected.
Digital cameras may malfunction when exposed to strong radio interference (e.g., electric fields, static electric-
ity, or line noise).
Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.
127
Memo
72

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Fuji-Finepix-HS30EXR

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fuji Finepix HS30EXR bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fuji Finepix HS30EXR in de taal/talen: Engels als bijlage per email.

De handleiding is 2,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Fuji Finepix HS30EXR

Fuji Finepix HS30EXR Gebruiksaanwijzing - Nederlands - 144 pagina's

Fuji Finepix HS30EXR Gebruiksaanwijzing - Deutsch - 140 pagina's

Fuji Finepix HS30EXR Gebruiksaanwijzing - Français - 144 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info