470830
125
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
OWNER’S MANUAL
This manual will show you how to use
your FUJIFILM DIGITAL CAMERA
FinePix A400 / FinePix A500 correctly.
Please follow the instructions carefully.
BL00529-200(2)
Getting Ready
Using the Camera
Advanced Features
Photography
Settings
Camera Connection
Software
Installation
•Playback
•Movie
Appendices
Troubleshooting
2
Warning
For customers in the U.S.A.
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
CAUTION
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or modifications not
expressly approved in this manual could void the user’s
authority to operate the equipment.
Notes on the Grant:
To comply with Part 15 of the FCC rules, this product must
be used with a Fujifilm-specified ferrite-core A/V cable,
USB cable, and DC supply cord.
For customers in Canada
CAUTION
This Class B digital apparatus complies with Canadian
ICES-003.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
Please read the Safety Notes (p.128) and make
sure you understand them before using the camera.
3
Important
NOTICE
BEFORE OPENING THE CD-ROM PROVIDED BY FUJI PHOTO FILM
CO., LTD., PLEASE READ THIS END USER LICENSE AGREEMENT
CAREFULLY. ONLY IF YOU AGREE WITH THIS AGREEMENT,
SHOULD YOU USE THE SOFTWARE RECORDED ON THE CD-ROM.
BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE
BOUND BY THIS AGREEMENT.
End User License Agreement
This End User License Agreement (“Agreement”) is an agreement between
Fuji Photo Film Co., Ltd. (“FUJIFILM”) and you, which sets forth the terms
and conditions of the license granted for you to use the software provided
by FUJIFILM.
The CD-ROM contains third party software. In case a separate agreement
is provided by a third party supplier for its software, the provisions of such
separate agreement shall apply to the use of such third party software,
prevailing over those of this Agreement.
1. Definitions.
(a) “Media” means the CD-ROM titled “Software for FinePix BZ”- which
is provided to you together with this Agreement.
(b) “Software” means the software which is recorded on Media.
(c) “Documentation” means the operation manuals of Software and
other related written materials which are provided to you together
with Media.
(d) “Product” means Media (including Software) and Documentation
collectively.
2. Use of Software.
FUJIFILM grants to you a nontransferable, nonexclusive license:
(a) to install one copy of Software onto one computer in binary machine
executable form;
(b) to use Software on the computer onto which Software is installed; and
(c) to make one backup copy of Software.
3. Restrictions.
3.1 You shall not distribute, rent, lease or otherwise transfer all or any
part of Software, Media or Documentation to any third party without
FUJIFILM’s prior written consent. You also shall not sublicense,
assign or otherwise transfer all or any part of the rights granted to
you by FUJIFILM under this Agreement without FUJIFILM’s prior
written consent.
3.2 Except as expressly granted by FUJIFILM hereunder, you shall not
copy or reproduce all or any part of Software or Documentation.
3.3 You shall not modify, adapt or translate Software or Documentation.
You also shall not alter or remove copyright and other proprietary
notices that appear on or in Software or Documentation.
3.4 You shall not, or shall not have any third party, reverse-engineer,
decompile, or disassemble Software.
4. Ownership.
All copyrights and other proprietary rights to Software and Documentation are
owned and retained by FUJIFILM or the third party suppliers as indicated on
or in Software or Documentation. Nothing contained herein shall be
construed, expressly or implicitly, as transferring or granting any right, license,
or title to you other than those explicitly granted under this Agreement.
5. Limited Warranty.
FUJIFILM warrants to you that Media is free from any defect in material
and workmanship under normal use for ninety (90) days from the date
of your receipt of Media. Should Media not meet the foregoing warranty,
FUJIFILM shall replace such defective Media with other Media bearing
no defect. FUJIFILM’s entire liability and your sole and exclusive
remedy with regard to any defect in Media shall be expressly limited to
such FUJIFILM’s replacement of Media as provided herein
6. DISCLAIMER OF WARRANTY.
EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES
PRODUCT “AS IS” AND WITHOUT WARRANTIES OF ANY KIND,
EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY,
EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS,
INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY
COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER
PROPRIETARY RIGHTS OF ANY THIRD PARTY, MERCHANTABILITY,
OR FITNESS FOR ANY PARTICULAR PURPOSE.
7. LIMITATION OF LIABILITY.
IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY
GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL,
INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FOR
LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE
USE OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
8. No export.
You acknowledge that neither Software nor any part thereof, will be
transferred, or exported to any country or used in any manner in violation
of any export control laws and regulations to which Software is subject.
9. Termination.
In case you breach any of the terms and conditions hereof, FUJIFILM
may immediately terminate this Agreement without any notice.
10. Term.
This Agreement is effective until the date when you cease to use
Software, unless earlier terminated in accordance with Section 9 hereof.
11. Obligation upon termination.
Upon termination or expiration of this Agreement, you shall, at your own
responsibility and expense, delete or destroy immediately all Software
(including its copies), Media and Documentation.
12. Governing Law.
This Agreement shall be governed by and construed in accordance with
laws of Japan.
Be sure to read this page before using the software.
4
EC Declaration of Conformity
We
Name: Fuji Photo Film (Europe) G.m.b.H.
Address: Heesenstrasse 31
40549 Dusseldorf, Germany
declare that the product
Product Name: FUJIFILM DIGITAL CAMERA FinePix A400 / FinePix A500
Manufacturer’s Name: Fuji Photo Film Co., Ltd.
Manufacturer’s Address: 26-30, Nishiazabu 2-chome, Minato-ku,
Tokyo 106-8620, Japan
conforms to the following Standards:
Safety:EN60065
EMC: EN55022: 1998 Classe B
EN55024: 1998
EN61000-3-2: 1995 + A1: 1998 + A2: 1998
following the provision of the EMC Directive (89/336/EEC, 92/31/EEC and
93/68/EEC) and Low Voltage Directive (73/23/EEC).
Dusseldorf, Germany
Place
January 1, 2006
Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet
weggooien maar inleveren als KCA
Signature/Managing DirectorDate
5
Disposal of Electric and Electronic Equipment in Private Households
Disposal of used Electrical & Electronic Equipment (Applicable in the European Union and other European countries with
separate collection systems)
This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this
product shall not be treated as household waste.
Instead it should be taken to an applicable collection point for the recycling of electrical and electronic
equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to
the environment and human health, which could otherwise be caused by inappropriate waste handling of this
product.
If your equipment contains easy removable batteries or accumulators please dispose these separately according to your local
requirements.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you have purchased the product.
In Countries outside the EU:
If you wish to discard this product, please contact your local authorities and ask for the correct way of disposal.
6
Contents
Warning................................................................. 2
Important............................................................... 3
EC Declaration of Conformity................................ 4
Disposal of Electric and Electronic Equipment
in Private Households...................................... 5
Contents................................................................ 6
Preface.................................................................. 8
About this Manual ............................................... 10
Accessories Included .......................................... 11
Camera Parts and Features................................ 12
Example of LCD Monitor Text Display ................ 13
Getting Ready
Attaching the Strap ............................................. 14
Loading the Batteries .......................................... 15
Checking the battery charge....................... 17
Loading the xD-Picture Card ......................... 18
Turning On and Off ............................................. 21
Setting the Date and Time .................................. 22
Correcting the Date and Time............................. 24
Selecting the Language ...................................... 25
Using the Camera
Taking Pictures (a AUTO Mode) ..................... 26
Taking pictures with the focus and
exposure locked....................................... 30
Adjusting the shot composition ................... 32
Viewing the Images............................................. 33
o Erasing the Images ........................................ 36
Advanced Features — Photography
Using the Photography Functions —
Procedure of Setting ..................................... 38
Setting the Shooting Mode................................. 40
e Macro (Close-up)........................................... 42
d Setting the Flash............................................. 43
Photography Menu Operation ............................ 45
Setting the menus ...................................... 45
List of photography menu options.............. 46
Selecting quality setting
(y QUALITY).......................................... 47
Taking pictures using self-timer
(* SELF-TIMER).................................... 49
Specifying sensitivity setting (S ISO)........ 51
Adjusting exposure compensation
(S EXP. COMPENSATION) ................. 52
Adjusting color balance
(T WB).................................................. 53
Advanced Features — Playback
u How to Specify Print Options (DPOF)........... 54
u DPOF Set Frame .......................................... 55
i Protecting Images ........................................ 58
g Automatic Playback...................................... 60
V Exchanging Data .......................................... 61
Y Trimming....................................................... 63
7
Advanced Features — Movie
r Recording Movies.......................................... 65
Changing movie size.................................. 67
w Playing Back Movies ..................................... 68
Settings
Adjusting LCD Monitor Brightness ...................... 69
U SET-UP......................................................... 70
Using the SET-UP menu............................. 70
SET-UP menu option.................................. 71
Camera Connection
Connecting to a TV ............................................. 78
Connecting Camera Directly to Printer —
PictBridge Function ....................................... 79
Software Installation
Installation on a Windows PC ............................. 84
Installation on a Mac OS X ................................. 87
Connecting to a PC............................................. 90
Using FinePixViewer................................... 93
Appendices
System Expansion Option.................................. 95
Accessories Guide ............................................. 96
Using Your Camera Correctly ............................ 98
Power Supply and Batteries............................... 99
Discharging rechargeable batteries ......... 101
Notes on the xD-Picture Card™ and
the Internal Memory.................................... 103
Warning Displays ............................................. 105
Troubleshooting
Troubleshooting................................................ 109
Specifications ................................................. 114
Explanation of Terms ..................................... 120
FUJIFILM Digital Camera Worldwide
Network..................................................... 121
Safety Notes................................................... 128
8
Preface
Z Test Shots Prior to Photography
For important photographs (such as weddings and
overseas trips), always take a test shot and view the
image to make sure that the camera is working normally.
Fuji Photo Film Co., Ltd. cannot accept liability for any
incidental losses (such as the costs of photography or
the loss of income from photography) incurred as a
result of faults with this product.
Z Notes on Copyright
Images recorded using your digital camera system cannot
be used in ways that infringe copyright laws without the
consent of the owner, unless intended only for personal
use. Note that some restrictions apply to the
photographing of stage performances, entertainments
and exhibits, even when intended purely for personal use.
Users are also asked to note that the transfer of
xD-Picture Card containing images or data protected
under copyright laws is only permissible within the
restrictions imposed by those copyright laws.
Z Handling Your Digital Camera
This camera contains precision electronic components.
To ensure that images are recorded correctly, do not
subject the camera to impact or shock while an image is
being recorded.
Z Liquid Crystal
If the LCD monitor is damaged, take particular care with
the liquid crystal in the monitor. If any of the following
situations arise, take the urgent action indicated.
If liquid crystal comes in contact with your skin
Wipe the area with a cloth and then wash thoroughly
with soap and running water.
If liquid crystal gets into your eye
Flush the affected eye with clean water for at least 15
minutes and then seek medical assistance.
If liquid crystal is swallowed
Flush your mouth thoroughly with water. Drink large
quantities of water and induce vomiting. Then seek
medical assistance.
Z Damaged by Water or Sand
FinePix A400 / FinePix A500 can be damaged on the
inside and outside by water and sand. When you are at
the beach or close to water, make sure that the camera is
not damaged by water or sand. Take care not to place the
camera on a wet surface.
Z Damaged by Condensation
If the camera is carried from a cold location into a warm
place, water droplets (condensation) may form on the
inside of the camera or on the lens. When this occurs, turn
the camera off and wait an hour before using the camera.
Condensation may also form on the xD-Picture card. In
this event, remove the xD-Picture card and wait a short
time.
9
Z Trademark Information
and xD-Picture Card™ are trademarks of Fuji
Photo Film Co., Ltd.
IBM PC/AT is a registered trademark of International
Business Machines Corp. of the U.S.A.
Macintosh, Power Macintosh, iMac, PowerBook, iBook
and Mac OS are trademarks of Apple Computer, Inc.,
registered in the U.S. and other countries.
Microsoft, Windows, and the Windows logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Windows is an abbreviated term referring to the
Microsoft
®
Windows
®
Operating System.
*
The “Designed for Microsoft
®
Windows
®
XP” logo refers
to the camera and the driver only.
Other company or product names are trademarks or
registered trademarks of the respective companies.
Z Notes on Electrical Interference
If the camera is to be used in hospitals or aircrafts, please
note that this camera may cause interference to other
equipment in the hospital or aircraft. For details, please
check with the applicable regulations.
Z Explanation of Color Television System
Z Exif Print (Exif ver. 2.2)
Exif Print Format is a newly revised digital camera file
format that contains a variety of shooting information for
optimal printing.
NTSC: National Television System Committee, color
television telecasting specifications adopted
mainly in the U.S.A., Canada and Japan.
PAL: Phase Alternation by Line, a color television
system adopted mainly by European countries
and China.
10
About this Manual
Z Icons next to the title display indicate the modes that are available.
Z 4-direction (nopq) button
Up, down, left, and right are indicated by black triangles in the Owner’s Manual. Up or down is shown as n or o, and left or
right is shown as p or q.
a
.
H
8
,
s
(
AUTO
)(
PORTRAIT
)
(
NIGHT
)
(
LANDSCAPE
)
(
MANUAL
)(
SPORTS
)
Setting the Flash
Available Photography modes:
, H, , , ( p.40)
This mode is suitable for shooting portraits in low-light
conditions.
Flash photography is useful for taking pictures at night or indoor dark locations. Choose from 6 flash modes
according to the type of shot.
MENU
/OK
DISP/
BACK
The flash setting
changes each time you
press d (q).
b Red-eye reduction
Using this mode to minimize
red-eye (eyes appear in red in
the finished photo).
The flash fires as required by
the shooting conditions.
Red-eye effect
When using the flash to take a picture of people in low-light
conditions, their eyes sometimes appear red in the picture.
This is caused by the light of the flash reflecting off the
inside of the eye.
d
This mark denotes issues that may affect the
camera’s operation.
This mark denotes points to notice in the
camera’s operation.
This mark denotes additional topics that
complement the basic operating procedures.
When pressing q:
When pressing MENU/OK:
11
Accessories Included
AA-size Alkaline Batteries (LR6) (2)
•Strap (1)
Video cable (1)
2.5 mm dia. plug-to-pin plug cable
USB cable (mini-B) (1)
CD-ROM (1)
Software for FinePix BZ
Owner’s Manual (this manual) (1)
12
Camera Parts and Features
*
Refer to the pages in parentheses for information
on using the camera parts or features.
MENU
/OK
DISP /
BACK
Shutter button
Self-timer lamp (p.50)
Lens (lens cover)
w Playback button
Viewfinder
Viewfinder lamp (p.29)
LCD monitor
Tripod mount
xD-Picture Card slot (p.18)
Battery compartment (p.16)
POWER button
Flash (p.43)
Viewfinder window
VIDEO OUT (Video output)
socket (p.78)
; USB socket (mini-B)
DC IN 3V (power input)
socket (p.78)
p / e Macro button (p.42)
q / d Flash button (p.43)
n / [ Tele zoom switch
(p.27, 34)
o / ] Wide zoom switch
(p.27, 34)
Strap mount
MENU/OK button
DISP (display) / BACK button
(p.32, 33)
Battery cover (p.15)
13
Example of LCD Monitor Text Display
*
FinePix A500
Z Photography mode
Z Playback mode
FinePix A400 / FinePix A500 has internal memory that can store images without xD-Picture Card. Y appears on the LCD monitor
when the internal memory is active.
1/ 1/2006
ISO
N
200
12
-
1
1
3
AF
* Self-timer (p.49)
e Macro (close-up) (p.42)
C Flash (p.43)
s Photography mode (p.40)
Date (p.22)
6 White balance (p.53)
[N Quality mode (p.47)
Number of available frames (p.20)
ISO 200 Sensitivity (p.51)
C Battery level warning (p.17)
{ AF warning (p.27)
| Camera shake warning (p.28)
Y Internal memory (p.19)
S Exposure compensation (p.52)
AF frame (p.27)
Zoom bar (p.27)
100-0009
12:00
AM
1/ 1/2006
w Playback mode (p.33)
u DPOF (p.55)
F Protection (p.58)
Zoom bar (p.34)
Date (p.22)
Frame number (p.73)
Time (p.22)
C Battery level warning (p.17)
Y Internal memory (p.19)
14
Attaching the Strap
Attaching the strap
Attach the strap as shown in 1 and 2.
When attaching the strap, move the fastener to adjust the
length and slightly away from the end of the strap, as
shown in figure 1.
Using the strap
1 Loop the strap over your wrist.
2 To avoid dropping the camera, secure the
strap around your wrist by sliding the
fastener to adjust the length.
1
2
14
15
Getting Ready
Loading the Batteries
Compatible batteries
AA-size alkaline batteries (2) or AA-size Ni-MH
rechargeable batteries (2) (sold separately)
1 Open the battery cover.
Batteries are required to operate the digital camera. At first, load the batteries in the camera.
Never use the following types of
batteries, as they could cause
serious problems such as battery
fluid leakage or overheating:
1. Batteries with split or peeling
outer casings
2. Combinations of different
types of batteries or new and used batteries together
Do not use manganese or Ni-Cd batteries.
Use the same brand and grade AA-size alkaline
batteries as those supplied with the camera.
Outer casing
Check that the camera is turned off before opening the
battery cover.
Do not open the battery cover while the camera is on.
This could damage the xD-Picture Card or ruin the
image files on the xD-Picture Card.
Do not apply force to the battery cover.
Continued
16
Loading the Batteries
2 Load the batteries correctly as indicated by
the polarity icons.
3 Close the battery cover.
Match the polarity icons (+ and ,) of the batteries to
those on the inside of the battery cover.
17
Getting Ready
Checking the battery charge
Turn the camera on and check the battery charge.
AThere is ample battery charge. (Not displayed)
BThere is insufficient charge left in the batteries. The
batteries will soon run out. Have a new set of batteries
ready. (Lit red)
CThe batteries are depleted. The display will shortly go
blank and the camera will stop working. Replace or
recharge the batteries. (Blinking red)
Notes on batteries
Soil, such as fingermarks on the poles of the batteries,
can shorten time for which the batteries can be used.
The time for which AA-size alkaline batteries (referred to
hereafter simply as alkaline batteries) can be used
varies depending on the brand. Some brands of alkaline
batteries may stop providing power more quickly than
those supplied with the camera. Note also that due to
their nature, the time for which alkaline batteries can be
used decreases in cold conditions (0°C to +10°C/+32°F
to +50°F). For this reason, it is better to use AA-size Ni-
MH batteries.
Due to the nature of the battery, the battery level
warning may appear early when the camera is used in
cold locations. Try warming the batteries in your pocket
or a similar location before use.
Depending on the battery type and the level of charge in
the batteries, the camera may run out of power without
first displaying a battery level warning. This is
particularly likely to happen when batteries that have run
out of charge once are re-used.
Depending on the camera mode, the transition from
C to V may occur more quickly.
Use Fujifilm Battery charger (sold separately) to charge
AA-size Ni-MH batteries.
See p.99-100 for information on the batteries.
When first purchased or if left unused for a long period,
the amount of time which AA-size Ni-MH batteries can
be used may be short. See p.100 for more information.
Battery power consumption varies greatly depending on
use. When you change to Playback mode from
Photography mode, C may not occur, however, V
may suddenly blink red and the camera may stop
operation.
18
Loading the xD-Picture Card
1 Open the battery cover.
2 Insert an xD-Picture Card.
3 Close the battery cover.
Although you can store pictures in the camera’s internal memory, you can store many more images on the xD-
Picture Card (sold separately). There is a slot for the xD-Picture Card inside the battery compartment.
MENU
/OK
DISP/
BACK
Gold marking
Gold contact area
Align the gold marking with
the gold contact area.
How to replace the xD-Picture Card
Push the xD-Picture Card into the slot and then slowly
remove your finger. The lock is released and the xD-
Picture Card is pushed out.
19
Getting Ready
When an xD-Picture Card (sold separately)
is inserted
[Record images]: Record images to an xD-Picture
Card.
[Playback images]: Playback images in an xD-Picture
Card.
When an xD-Picture Card (sold separately) is
not inserted
[Record images]: Record images to internal memory.
[Playback images]: Playback images in internal memory.
Images held in the camera’s internal memory may be
corrupted or erased due to problems such as camera
faults. Save your important data to another media (i.e.,
MO disk, CD-R, CD-RW, hard disk, etc.).
It is possible to transfer saved images on the internal
memory to an xD-Picture Card (p.61).
Notes on xD-Picture Card
When storing xD-Picture Cards, make sure that they
are kept out of the reach of children. An xD-Picture
Card could be swallowed and cause suffocation. If a
child swallows an xD-Picture Card, seek medical
attention or call emergency number right away.
If the xD-Picture Card is oriented incorrectly, it will not
go all the way into the slot. Do not apply force when
inserting an xD-Picture Card.
Note that the xD-Picture Card may spring out if you
release your finger quickly from the card immediately
after the lock is released.
Operation of this camera is only guaranteed when it is
used with FUJIFILM xD-Picture Card.
See p.103 for information on the xD-Picture Card.
The bigger the number of recorded pixels, the better the
image quality becomes. As the number of recorded
pixels becomes smaller, you will be able to record more
frames to an xD-Picture Card. See p.47 for information
on changing the image quality setting.
The size of an image file varies depending on the
subject. For this reason, the number recorded may not
represent the actual number of frames.
About internal memory
About images in the internal memory
ISO
200
N
12
FinePix A400 / FinePix A500 has
internal memory that can store
images without xD-Picture Card.
Y appears on the LCD monitor
when internal memory is active.
20
Loading the xD-Picture Card
The table below shows the standard number of available frames for internal memory or a new xD-Picture Card formatted on
the camera.
Z FinePix A400
Z FinePix A500
Standard number of available frames per xD-Picture Card / internal memory
Quality setting
4F 4N
*
% 21`
Number of recorded pixels 2304 × 1728 2304 × 1536 1600 × 1200 1280 × 960 640 × 480
Internal memory (approx. 12 MB) 5 11 13 19 25 93
16 MB 715172533122
32 MB 15 31 35 50 68 247
64 MB 32 64 72 101 137 497
128 MB 64 128 144 204 275 997
256 MB 129 257 290 409 550 1997
512 MB 259 515 580 818 1101 3993
1 GB 519 1031 1162 1639 2205 7995
*
The factory default settings
Quality setting
[F [N
*
% 32`
Number of recorded pixels 2592 × 1944 2592 × 1728 2048 × 1536 1600 × 1200 640 × 480
Internal memory (approx. 12 MB) 4 9 10 15 19 93
16 MB 612131925122
32 MB 12 25 28 40 50 247
64 MB 25 50 56 81 101 497
128 MB 51 102 113 162 204 997
256 MB 102 204 228 325 409 1997
512 MB 205 409 456 651 818 3993
1 GB 412 819 913 1305 1639 7995
*
The factory default settings
21
Getting Ready
Turning On and Off
Turning the camera on in
Photography mode
Turning the camera on in
Playback mode
Changes between Photography mode and
Playback mode
Press w during shooting to change to Playback mode.
Press the shutter button down halfway to return to
Photography mode.
The lens moves and the lens cover opens when turning
the camera on in Photography mode. Take care not to
obstruct the lens.
Take care not to get fingerprints on the camera lens as
this will result in impaired image quality in your shots.
POWER
Press POWER down fully
to turn the camera on.
Press POWER again to
turn the camera off.
To change to Photography mode, press the shutter button
down halfway.
MENU
/OK
DISP/
BACK
Press w for about 1
second to turn the
camera on in Playback
mode.
Press POWER to turn
the camera off.
22
Setting the Date and Time
1 “DATE/TIME NOT SET” message appears
when turning the camera on.
2 Set the date and time.
When using the camera for the first time after purchasing, the date and time are cleared. Set the date and time.
Press MENU/OK to set the date and
time.
SET NO
DATE/TIME
NOT SET
APress p or q to select Year,
Month, Day, Hour, or Minute.
BPress n or o to correct the
setting.
DATE/TIME
SET CANCEL
YYYY
.
MM
.
DD
2006
. 1 . 1
12 : 00
AM
23
Getting Ready
3 Change the date format.
Date format
YYYY.MM.DD: 2006.1.24
MM/DD/YYYY: 1/24/2006
DD.MM.YYYY: 24.1.2006
SET CANCEL
DATE/TIME
MM/DD/YYYY
1 / 24 / 2006
10 : 00
AM
APress p or q to select the date
format.
BPress n or o to set the format.
CAlways press MENU/OK after the
settings are completed.
Holding down n or o changes the numbers
continuously.
When the time displayed passes “12”, the AM/PM
setting changes.
“DATE/ TIME NOT SET” message also appears when
the batteries have been removed and the camera has
been left for a long period.
Once the AC power adapter has been connected or the
batteries have been installed for 2 hours or more, the
camera settings will be retained for roughly 6 hours even
if both sources of power are removed.
24
Correcting the Date and Time
1 Display the SET-UP menu. 2 Display the DATE/TIME screen.
APress MENU/OK to display the
menu on the LCD monitor.
BPress p or q to select U
OPTION.
CPress n or o to select SET-UP.
DPress MENU/OK to display the
SET-UP menu.
OPTION
LCD
SET-UP
APress p or q to select option 3.
BPress o to select DATE/TIME.
CPress q.
See “2 Set the date and time.”
(p.22).
2 314
SET CANCEL
TIME DIFFERENCE
/LANG.
USB MODE
:SET
:ENGLISH
:SET
SET-UP
DATE/TIME SET
25
Getting Ready
Selecting the Language
1 Display the SET-UP menu. 2 Select the language.
APress MENU/OK to display the
menu on the LCD monitor.
BPress p or q to select U
OPTION and then press n or o
to select SET-UP.
CPress MENU/OK to display the
SET-UP menu.
OPTION
LCD
SET-UP
APress p or q to move to option
3.
BPress n or o to select
.
CPress q to select ENGLISH,
FRANCAIS, DEUTSCH,
ESPAÑOL, ITALIANO, , or
. Press q to cycle through
the language settings.
2 314
SET CANCEL
TIME DIFFERENCE
USB MODE
:SET
:SET
SET-UP
DATE/TIME :SET
/LANG.
ENGLISH
26
Taking Pictures (a AUTO Mode)
1 Turn the camera on.
Press POWER down fully to turn the camera on.
This section describes the basic operations.
POWER
Holding the camera correctly
Brace your elbows
against your sides and
hold the camera with
both hands.
Do not cover the
lens or flash with
your fingers.
Moving the camera while shooting gives a blurred
picture (camera shake). Hold the camera steadily
with both hands.
If the lens or flash is obscured by your fingers or the
strap, subjects may be out of focus or the brightness
(exposure) of your shot may be incorrect.
26
27
Using the Camera
Continued
2 Check the composition on the LCD monitor.
To adjust zoom scale using the Zoom switch:
3 Focus on the main subject in the AF frame
and press the shutter button down halfway.
Select e Macro mode to take close-up shots (p.42).
Use digital zoom when you want to shoot the subject
closer (p.74).
N
12
N
12
] switch
(Zoom out)
[ switch
(Zoom in)
Focal range
Approx. 60 cm (2.0 ft.)
to infinity
Optical zoom focal
length (35 mm
camera equivalent)
Approx. 38 mm to
114 mm
Max. zoom scale
Zoom bar
Focus on the subject
Double beep is heard
Viewfinder lamp lit green
Not focus on the subject
No sound
{ indicated
Viewfinder lamp blinking green
Pressing halfway
The shutter button has a halfway point at which focus and
exposure are automatically optimized before taking the
picture by pressing fully down.
N
12
AF frame AF frame
becomes smaller
and camera
focuses on the
subject.
Halfway
pressed
28
Taking Pictures (a AUTO Mode)
4 Press the shutter button fully.
When taking a picture using the flash, the image may
disappear and go dark briefly due to flash charging. The
viewfinder lamp blinks orange during charging.
The subject may be difficult to see clearly on the LCD
monitor (in bright sunlight or dimly lit scenes, etc.). If so,
use the viewfinder to take the picture.
When the subject is not in the AF frame, use AF/AE lock
to take the picture (p.30).
When pressing the shutter button down fully in one
motion, the camera takes the picture without the AF
frame changing.
Beep
Halfway pressed Fully pressed
Flash
Change the flash mode when you want to take
pictures without flash. See p.43 for information on
flash.
Notes on taking pictures
The image shown on the LCD monitor before the picture
is taken may differ in brightness, color, etc. from the
image actually recorded. Play back the recorded image
to check it (p.33).
When selecting a slow shutter speed that will cause
camera shake, | appears on the LCD monitor. Use
flash or a tripod.
See p.105-108 for information on Warning displays. See
“Troubleshooting” (p.109-113) for more information.
When pressing the shutter
button down halfway, b
appears on the LCD monitor
before the flash fires.
29
Using the Camera
Z Using viewfinder
When using the viewfinder to take pictures, press DISP/
BACK to turn the LCD monitor off. Turning the LCD
monitor off conserves battery power.
Frame the shot so that the subject fills the center of the
viewfinder. When taking a picture at a distance of 1 m to
2 m (3.3 ft. to 6.6 ft.) using the viewfinder, only the shaded
area in the figure is photographed.
Z Viewfinder lamp display
The viewfinder lamp lights or blinks when turning on the
camera or pressing the shutter button. The viewfinder
lamp shows camera status.
Holding the camera correctly
The viewfinder cannot be used to take shots in Macro
mode.
For more precise shot framing, use the LCD monitor to
take the picture.
Viewfinder
Using the viewfinder allows
for a steady arm position,
preventing picture blur.
Display Status
Lit green Locking the focus or LCD monitor OFF
Blinking green AF/AE in progress, camera shake
warning, or AF warning (ready to
shoot)
Blinking green and
orange alternately
Recording to xD-Picture Card or
internal memory (ready to shoot)
Lit orange Recording to xD-Picture Card or
internal memory (not ready)
Blinking orange Charging flash (flash will not fire)
Blinking red Warnings for xD-Picture Card and
internal memory
Card not formatted, incorrect format,
memory full, xD-Picture Card or
internal memory error
Lens operation error
Detailed warning messages appear on the LCD monitor
(p.105-108).
Viewfinder lamp
Continued
30
Taking Pictures (a AUTO Mode)
Taking pictures with the focus
and exposure locked
In the above composition, the subjects (two people in this
case) are not in the AF frame. Pressing the shutter button
halfway at this point will result in the subjects being out of
focus.
AF/AE lock is useful:
Use AF/AE lock to guarantee best result when shooting a
subject that is not suited to autofocusing (p.31).
1 Move the camera slightly so that one of the
subjects is in the AF frame.
2 Press the shutter button down halfway to
focus on the subject.
N
12
Using AF/AE lock
N
12
Double
beep
Halfway
pressed
31
Using the Camera
3 Continue to hold the shutter button down
halfway. Move the camera back to the
original image and press the shutter button
fully.
AF/AE lock can be applied repeatedly before the shutter
is released.
Use AF/AE lock in all Photography modes to guarantee
excellent results.
On the FinePix A400 / FinePix A500, pressing the
shutter button down half way locks the focus and
exposure settings (AF and AE lock).
Beep
Fully pressed
Subjects not suitable for autofocus
FinePix A400 / FinePix A500 uses a high-precision
autofocusing mechanism. However, it may have difficulty
focusing on the following:
Subjects photographed through glass
Subjects that do not reflect well, such as hair or fur
Subjects with no substance, such as smoke or flames
Dark subjects
Subjects with little or no contrast between the subject
and the background (such as subjects dressed in the
same color as the background)
Shots where another high-contrast object (not the
subject) is close to the AF frame and is either closer or
further away than your subject (such as a shot of
someone against a background with strongly
contrasting elements)
For such subjects use AF/AE lock (p.30).
Very shiny subjects such
as a mirror or car body
Fast moving subjects
32
Taking Pictures (a AUTO Mode)
Adjusting the shot composition
Position the main subject at the intersection of two lines in
this frame or align one of the horizontal lines with the
horizon. Use this frame as a guide to the subject’s size
and the balance of the shot while composing a shot.
Selecting LCD monitor display
MENU
/OK
DISP/
BACK
N
12
N
12
Pressing DISP/BACK
changes the LCD
monitor display.
Text displayed
No text displayed
LCD monitor OFF
Framing guideline
displayed
LCD monitor cannot be turned off when e Macro mode is
set.
Best framing
N
12
33
Using the Camera
Viewing the Images
Setting the camera to Playback
mode
When the camera is off, press w for about 1 second to
turn the camera on in Playback mode.
Playback your images to check them. For important photographs, always take a test shot and view the image
to make sure that the camera is working normally.
When pressing w, the last image shot appears on the
LCD monitor.
MENU
/OK
DISP/
BACK
Press w during
shooting to
change to
Playback mode.
Selecting LCD monitor display
100-0001
10:00
AM
1/24/2006
MENU
/OK
DISP/
BACK
Text displayed No text displayed
Multi-frame
playback
Press DISP/BACK
during Playback
mode to change the
display.
Continued
34
Viewing the Images
Single-frame playback
1 Zoom in / Zoom out.
To zoom in an image during single-frame playback:
Press DISP/BACK to cancel playback zoom.
2 Display another part of the image.
To select the required image:
Press p: last image
Press q: next image
Selecting images
10:00
AM
100-0001
1/24/2006
To select images on the thumbnail
lists screen, hold down p or q
for 1 second during playback.
When releasing p or q, camera
returns to single-frame playback.
Playback zoom
CANCEL
PANNING
CANCEL
PANNING
] switch
(Zoom out)
[ switch
(Zoom in)
Press [(n) or ](o) to zoom
in or out on an image.
Zoom bar
CANCEL
Navigation screen
(Current displayed image)
35
Using the Camera
Press DISP/BACK to return to the zoom setting.
Z Zoom scales (FinePix A400)
Z Zoom scales (FinePix A500)
Multi-frame playback
Multi-frame playback screen (9 frames) appears on the
LCD monitor. Select required frame from the 9 frames.
APress p or q to move to
another part of the image.
BPress n, o, p, or q to display
another part of the image.
Quality mode Max. zoom scale
4 (2304 × 1728 pixels)
Approx. 3.6×
% (2304 × 1536 pixels)
Approx. 3.6×
2 (1600 × 1200 pixels)
Approx. 2.5×
1 (1280 × 960 pixels)
Approx. 2×
Quality mode Max. zoom scale
[ (2592 × 1944 pixels)
Approx. 4.1×
% (2592 × 1728 pixels)
Approx. 4.1×
3 (2048 × 1536 pixels)
Approx. 3.2×
2 (1600 × 1200 pixels)
Approx. 2.5×
APress n, o, p, or q to move
the cursor (colored frame) to the
selecting frame.
Press n or o repeatedly to
jump to the next page.
BPress MENU/OK again to
enlarge the image.
Still images viewable on FinePix A400 /
FinePix A500
This camera will display still images recorded on FinePix
A400 / FinePix A500 or still images (excluding some
uncompressed images) recorded on any FUJIFILM digital
camera that supports xD-Picture Cards. Clear playback
or playback zooming may not be possible for still images
shot on cameras other than FinePix A400 / FinePix A500.
36
o Erasing the Images
Setting the camera to
w Playback mode (p.33)
Selecting FRAME or ALL
FRAMES
Use this mode to erase unnecessary images to have ample free space on the xD-Picture Card. Your camera
calls images “frames”.
APress MENU/OK to display the
Playback menu on the LCD
monitor.
BPress p or q to select o
ERASE.
CPress n or o to select FRAME
or ALL FRAMES.
DPress MENU/OK to confirm your
selection.
BACK
ALL FRAMES
FRAME
ERASE
Erasing one frame at a time (FRAME)
APress p or q to select the
erasing frame (file).
BPress MENU/OK to erase the
currently displayed frame (file).
To erase another frame (file), repeat above steps.
When erasing frames (files) is completed, press DISP/
BACK.
Pressing MENU/OK repeatedly erases consecutive
frames (files). Take care not to erase a frame (file) by
mistake.
ERASE OK?
FRAME
100-0001
YES CANCEL
37
Using the Camera
Erasing all frames (ALL FRAMES)
Press MENU/OK to erase all the
frames (files).
TAKE A WHILE
ALL FRAMES
100-0001
YES CANCEL
ERASE ALL OK?
IT MAY
CANCEL
ALL FRAMES
Press DISP/BACK to cancel
erasing of all the frames (files).
Some unprotected frames
(files) will be left unerased.
When using an xD-Picture Card, the images in the xD-
Picture Card are erased. When not using an xD-
Picture Card, the images in the internal memory are
erased.
Selecting : BACK returns to single-frame playback
without erasing any frames (files).
Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (p.58).
If “DPOF SPECIFIED. ERASE OK?” or “DPOF
SPECIFIED. ERASE ALL OK?” appears, press MENU/
OK again to erase the frames (files).
Erased frames (files) cannot be recovered. Back up
important frames (files) onto your PC or another media.
Setting the camera to w Playback mode (p.33)
38
Using the Photography Functions — Procedure of Setting
1 Select the Photography mode.
Set the Photography mode from the menu.
The available functions are limited depending on the
Photography mode selected. The camera settings are
tailored to the scene being shot.
2 Specify the photography settings.
Pressing buttons or selecting menu allows you to
specify photography functions. You can obtain the
best result for shooting.
Z Specifying functions using buttons
Specify the camera settings for taking pictures to get the best result. A general guide is given below.
q AUTO
This is the easiest mode for taking
pictures (p.40).
H PORTRAIT
, LANDSCAPE
. SPORT
8 NIGHT
Select the best Shooting mode for the
scene being shot (p.40-41).
q MANUAL
This mode provides detailed settings that
are impossible to set in q AUTO mode
(p.41).
SHOOTING MODE
PORTRAIT
AUTO
MANUAL
MOVIE
e
Used for close-up shots (p.42).
d
Used for shots in dark locations or for
backlit subjects, etc. (p.43).
MENU
/OK
DISP/
BACK
e (p) Macro button
d (q) Flash button
38
39
Advanced Features — Photography
Z Specifying functions using Photography menu
(MENU/OK button)
y QUALITY
Use to specify required image size
(p.47).
* SELF-TIMER
Used in situations such as group
shots where the photographer is
included in the shot (p.49).
S ISO
Use to specify required sensitivity
setting (p.51).
S
EXP.
COMPENSATION
Use this setting to obtain the correct
exposure (only s) (p.52).
TWB
Use this setting to adjust the color
balance to suit the color of the
ambient light around the subject (only
s) (p.53).
SELF-TIMER
OFF
MENU
/OK
DISP/
BACK
40
Setting the Shooting Mode
This is the easiest mode for providing crisp and clear
shots.
Use this mode for ordinary photography.
Camera specifies “EXP. COMPENSATION” and “WB”
settings automatically.
Use this mode for photography to get beautiful skin tones
and soft overall tone.
You can select the most suitable setting according to the subject by selecting one of the Shooting modes.
APress MENU/OK to display the
menu on the LCD monitor.
BPress p or q to select q
SHOOTING MODE.
CPress n or o to select Shooting
mode.
DPress MENU/OK to confirm the
setting.
SHOOTING MODE
PORTRAIT
AUTO
MANUAL
MOVIE
q AUTO (a)
Available flash modes
AUTO, b, d, C
H PORTRAIT
Available flash modes
AUTO, b, d, C, c,
n
41
Advanced Features — Photography
Use this mode for shooting scenery in daylight and
provides crisp, clear shots of scenery such as buildings
and mountains.
Use this mode to take pictures of a moving subject.
It gives priority to faster shutter speeds.
Use this mode for shooting evening and night scenes.
A picture is taken with a slow shutter of up to 2 seconds.
Set the S Exposure compensation (p.52) and T
White balance (p.53) to manual to easily control
yourself.
, LANDSCAPE
Flash cannot be used in
the Landscape mode.
. SPORT
Available flash modes
AUTO, d, C
8 NIGHT
Available flash modes
C, c, n
Use a tripod to prevent
camera shake. Because
a picture is taken with a
slow shutter.
q MANUAL (s)
Available flash modes
AUTO, b, d, C, c, n
42
e Macro (Close-up)
Available Photography modes:
a and s (p.40)
Use this mode to take close-up shots.
N
12
e appears on the LCD monitor
indicating that you can take
close-up shots.
MENU
/OK
DISP/
BACK
Press e (p) to
select Macro mode.
Press e (p) again
to cancel Macro
mode.
When using the viewfinder to take a picture in Macro
mode, the field visible through the viewfinder does not
match the field actually photographed. Because the
viewfinder and lens are in different positions. Use the
LCD monitor to take picture in Macro mode.
When taking pictures in Macro mode, the corners of the
image may become dark.
Focal range
Approx. 10 cm to 80 cm (3.9 in. to 2.6 ft.)
Effective flash range
Approx. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)
Use a tripod to prevent camera shake in Macro mode.
Any of the following cancels Macro mode:
- Changing the Photography mode setting
- Turning the camera off
43
Advanced Features — Photography
d Setting the Flash
Available Photography modes:
a, H, ., 8, s (p.40)
Use this mode for ordinary photography.
This mode is suitable for shooting portraits in low-light
conditions.
Flash photography is useful for taking pictures at night or indoor dark locations. Choose from 6 flash modes
according to the type of shot.
When pressing the shutter button down halfway, b
appears on the LCD monitor before the flash fires.
AUTO Auto flash (not displayed)
The flash fires as required by the
shooting conditions.
MENU
/OK
DISP/
BACK
The flash setting
changes each time you
press d (q).
b Red-eye reduction
Using this mode to minimize
red-eye (eyes appear in red in
the finished photo).
The flash fires as required by
the shooting conditions.
Red-eye effect
When using the flash to take a picture of people in low-light
conditions, their eyes sometimes appear red in the picture.
This is caused by the light of the flash reflecting off the
inside of the eye.
d Forced flash
Use this mode in backlit scenes, or
to get the correct colors when
taking a picture under bright
lighting.
In this mode, the flash fires in bright
as well as dark conditions.
44
d Setting the Flash
C Suppressed flash
This mode is suitable for situations
where the flash cannot be used.
Use a tripod to prevent camera
shake when shooting in
Suppressed flash mode in the dark
condition.
Any time, flash does not fire.
c Slow synchro,
n Red-eye reduction + Slow synchro
This mode allows you to take
pictures of people at night that
clearly show both your subjects
and the night time backdrop. To
prevent camera shake, always use
a tripod.
Using n synchronizes Red-eye
reduction mode.
Using 8 selects slow shutter
speeds of up to 2 seconds.
In bright scenes, over exposure may occur.
ZList of available flash modes in each
Photography mode
The following table shows the flash modes available for
each Photography mode.
ZEffective flash range (S : AUTO)
Wide-angle: approx. 60 cm to 3.1 m (2.0 ft. to 10.2 ft.)
Telephoto: approx. 60 cm to 2 m (2.0 ft. to 6.6 ft.)
If you take pictures outside of the effective flash range, the
image may appear dark even if the flash is used.
Notes on using flash
If pressing the shutter button while the flash is charging
(viewfinder lamp blinking orange), the picture will be
taken without the flash (when using AUTO or b).
The flash charging time may increase when the batteries
are low on charge.
When taking a picture using the flash, the image may
disappear and go dark briefly due to flash charging. The
viewfinder lamp blinks orange during charging.
The flash fires several times (pre-flashes and the main
flash). Do not move the camera until the picture is taken.
AUTO b d C c n
a
H
,
.
8
s
Available Photography modes: a, H, ., 8, s (p.40)
45
Advanced Features — Photography
Photography Menu Operation
Setting the menus
Use the Photography menu to adjust image quality. You can take pictures in a wide range of conditions.
APress MENU/OK to display the
menu on the LCD monitor.
BPress p or q to select the
menu.
CPress n or o to change the
setting.
DPress MENU/OK to confirm the
setting.
SELF-TIMER
OFF
46
Photography Menu Operation
List of photography menu options
Page
Menu Functions Settings
Factory
default
1
qSHOOTING
MODE (p.40)
Use this setting to provide the best photography menu
setting for the scene being shot.
r MOVIE / q MANUAL /
q AUTO/ H PORTRAIT /
, LANDSCAPE / . SPORT /
8 NIGHT
qAUTO
y QUALITY (p.47)
This setting can be used with any of the modes.
Specifies the image size.
The larger image size, the better image quality is obtained.
The smaller image size, the larger number of images are
recorded.
FinePix A400
4F / 4N / / 2 / 1 /
`
4N
FinePix A500
÷F / ÷N / / 3 / 2 /
`
÷N
* SELF-TIMER
(p.49)
This setting can be used with any of the modes.
Used in situations such as group shots where the
photographer is included in the shot.
OFF / * (10 seconds) /
( (2 seconds)
OFF
U OPTION (p.70) Use this setting to change the camera settings. SET-UP / j LCD
2
S ISO (p.51)
This setting can be used with any of the modes.
Specifies required sensitivity setting of the ambient light
around the subject.
The larger value of the sensitivity, the higher sensitivity is
obtained. The higher sensitivity settings will allow you to
take pictures in darker locations.
AUTO / 100 / 200 / 400 AUTO
SEXP.
COMPENSATION
(p.52)
This setting can be used when the Photography mode sets
to q MANUAL (s).
Use this setting to obtain the correct exposure.
–2 EV to +2 EV
(1/3 EV increments)
0
TWB (p.53)
This setting can be used when the Photography mode sets
to q MANUAL (s).
Use this setting to adjust the color balance to suit the color
of the ambient light around the subject.
AUTO / 6 / 7 / 9 / 0 /
- / 8
AUTO
Setting the menus (p.45)
47
Advanced Features — Photography
Selecting quality setting
(y QUALITY)
Available Photography modes:
a, H, ,, ., 8, s (p.40)
Use this menu to specify the image size.
Select the quality setting for the scene being shot.
Z Quality settings in Photography mode
(FinePix A400)
QUALITY
6
12
13
19
FRAMES
*
FinePix A500
Quality mode Sample uses
4 F (2304 × 1728)
4 N (2304 × 1728)
Printing at up to 6R (15.2 × 20.3 cm/
6 × 8 in.) / A5 size
For better quality, select 4 F
(2304 × 1536)
2 (1600 × 1200) Printing at up to 4R (10.2 × 15.2 cm/
4 × 6 in.) / A6 size
1 (1280 × 960) Printing at up to 3R (8.9 × 12.7 cm/
3.5 × 5 in.) size
` (640 × 480) To use for e-mail or web site
Setting the menus (p.45)
48
Photography Menu Operation
Z Quality settings in Photography mode
(FinePix A500)
Quality mode Sample uses
÷ F (2592 × 1944)
÷ N (2592 × 1944)
Printing at up to 8R (20.3 × 25.4 cm/
8 × 10 in.) / A4 size
For better quality, select ÷ F
(2592 × 1728)
3 (2048 × 1536) Printing at up to 6R (15.2 × 20.3 cm/
6 × 8 in.) / A5 size
2 (1600 × 1200) Printing at up to 4R (10.2 × 15.2 cm/
4 × 6 in.) / A6 size
` (640 × 480) To use for e-mail or web site
The quality setting is retained even when the camera is
turned off or the mode setting is changed.
When changing the quality setting, the number of
available frames also changes (p.20). The numbers to
the right of setting show the number of available frames.
Area shot and quality setting
Normal shooting provides an aspect ratio of 4:3 and
shooting provides an aspect ratio of 3:2 (same aspect ratio
as 35 mm film and post card).
N
12
Area shot excluding
12
Area shot with
Setting the menus (p.45)
49
Advanced Features — Photography
Taking pictures using self-timer
(* SELF-TIMER)
Available Photography modes:
a, H, ,, ., 8, s (p.40)
Use this menu in situations where the photographer is
included in the shot.
When selecting the self-timer setting, the self-timer icon
appears on the LCD monitor.
*: The picture is taken after 10 seconds.
(: The picture is taken after 2 seconds.
1 Press the shutter button down halfway to
focus on the subject and press the shutter
button fully.
Pressing the shutter button down halfway that focuses
on the subject.
Without releasing the shutter button, press the button
all the way down (fully pressed) to start the self-timer.
SELF-TIMER
OFF
Beep
Double
beep
Halfway pressed Fully pressed
Continued
Setting the menus (p.45)
50
Photography Menu Operation
2 Taking pictures in selected time
8
A countdown appears on
the LCD monitor indicating
the time remaining until the
picture is taken.
A picture is taken after the self-timer lamp changes
from lit to blinking (only blinks with the 2-second self-
timer).
Using the 2-second self-timer
This is useful when you worry about camera shake even if
attaching the camera on a tripod.
To stop the self-timer, once it has started running, press
DISP/BACK.
Any of the following cancels the self-timer setting:
- Completing the shooting
- Changing the Photography mode setting
- Setting the camera to Playback mode
- Turning the camera off
Take care not to stand in front of the lens when pressing
the shutter button as this can prevent the correct focus
or brightness (exposure) from being achieved.
Setting the menus (p.45)
51
Advanced Features — Photography
Specifying sensitivity setting
(S ISO)
Available Photography modes:
a, H, ,, ., 8, s (p.40)
Use this menu to specify required sensitivity setting of the
ambient light around the subject.
The larger value of the sensitivity, the higher sensitivity is
obtained. The higher sensitivity settings will allow you to
take pictures in darker locations.
400
200
100
ISO
AUTO
ZSettings
AUTO/100/200/400
Selecting AUTO as the sensitivity setting, the camera
selects the best sensitivity setting for the subject’s
brightness.
The selected sensitivity setting
appears on the LCD monitor
when the sensitivity setting is
set to another setting excluding
AUTO.
Sensitivity is retained even when the camera is turned off
or the mode setting is changed.
Although higher sensitivity settings will allow you to take
pictures in darker locations, they will also increase the
amount of speckling in your images. Choose the sensitivity
setting that best suits the conditions.
ISO
400
N
12
Setting the menus (p.45)
52
Photography Menu Operation
Adjusting exposure
compensation
(S EXP. COMPENSATION)
Available Photography mode: s (p.40)
Use this menu for shots to get the correct brightness
(exposure), such as shots with extremely high contrast
between the subject and the background.
Compensation range: –2 EV to +2 EV
(13 steps in 1/3 EV increments)
Explanation of Terms “EV” (p.120)
2
3
1
3
1
3
EXP. COMPENSATION
+ /
+ /
-
/
0
positive (+) compensation
negative (–) compensation
Guide to compensation
Backlit portraits:
+2/3 EV to +1 2/3 EV
Very bright scenes (such as
snowfields) and highly
reflective subjects: +1 EV
Shots made up predominantly of sky: +1 EV
Spotlit subjects, particularly against dark backgrounds:
–2/3 EV
Scenes with low reflectivity, such as shots of pine trees
or dark foliage: –2/3 EV
Any of the following disables exposure
compensation:
Using the flash in AUTO or b mode
Shooting dark scenes in d mode
Setting the menus (p.45)
53
Advanced Features — Photography
Adjusting color balance
(T WB)
Available Photography mode: s (p.40)
Adjust the color balance based on white to suit the color
of the ambient light around the subject.
AUTO: Automatic adjustment
6 : Shooting outdoors in good weather
7: Shooting in shade
9 : Shooting under Daylight fluorescent lamps
0 : Shooting under Warm White fluorescent lamps
- : Shooting under Cool White fluorescent lamps
8 : Shooting in incandescent light
WB
AUTO
In AUTO mode, the correct white balance may not be
achieved for subjects such as close-ups of people’s
faces and pictures taken under a special light source.
Select the correct white balance for the light source.
When the flash fires, the white balance setting for the
flash is used. Consequently, to achieve a particular
effect, the flash mode should be set to C Suppressed
flash (p.44).
The color tones may vary depending on the shooting
conditions (light source, etc.).
Explanation of Terms “White balance” (p.120)
Setting the menus (p.45)
54
u How to Specify Print Options (DPOF)
DPOF stands for Digital Print Order Format and refers to a format that is used for recording printing
specifications for images shot using a digital camera on media such as an xD-Picture Card. The
recorded specifications include information on which frames are to be printed.
This section gives a detailed description of how to order your prints with FinePix A400 / FinePix A500.
*
Some printers do not support date and time imprinting or specification of the number of prints.
*
The warnings shown below may appear while specifying the prints.
“DPOF SPECIFIED. ERASE OK ?”
“DPOF SPECIFIED. ERASE ALL OK ?” (p.37)
When erasing the image, the DPOF setting for that image is deleted at the same time.
“RESET DPOF OK ?” (p.56)
When inserting an xD-Picture Card that contains images specified for printing by another camera, those print specifications are all
reset and replaced by the new print specifications.
[DPOF FILE ERROR] (p.107)
Up to 999 images can be specified on the same xD-Picture Card.
54
55
Advanced Features — Playback
u DPOF Set Frame
Using w Playback mode (p.33)
Selecting WITH DATE, E appears on the LCD monitor
and the date will be imprinted on your prints.
You can specify the image, number of prints, with or without date of printing with a DPOF-compatible printer.
APress MENU/OK to display the
Playback menu on the LCD
monitor.
BPress p or q to select u
DPOF.
CPress n or o to select WITH
DATE, WITHOUT DATE, or
RESET ALL.
DPress MENU/OK.
RESET ALL
WITHOUT DATE
WITH DATE
DPOF
WITH DATE / WITHOUT DATE
APress p or q to display the
frame (file) for specifying DPOF
setting.
BPress n or o to set a value.
Up to 99 sheets are printed.
For frames (files) that you do not
want printed, set the number of
prints to 0 (zero).
To specify more DPOF settings, repeat steps A and B.
CAlways press MENU/OK after the
settings are completed.
Pressing DISP/BACK cancels
those settings.
DPOF
:
SHEETS
100-0001
00009
01
FRAME
SET
Total number of prints
Setting for that frame
56
u DPOF Set Frame
Canceling DPOF setting
A Press MENU/OK to display the Playback menu on the
LCD monitor.
B Select u DPOF in the menu.
C Press n or o to select WITH DATE or WITHOUT
DATE.
D Press p or q to select the frame (file) with the DPOF
setting you want to cancel.
E Set the number of prints to 0 (zero).
To cancel the DPOF setting for another frame (file), repeat
steps D and E.
Always press MENU/OK to complete the settings.
DPOF ALL RESET (p.57)
When DPOF settings were specified on another camera.
When the data includes a frame (file) with DPOF
settings that were specified on another camera, “RESET
DPOF OK?” appears.
Pressing MENU/OK erases all of the DPOF settings
already specified for each frame (file). Specify the DPOF
setting for each frame (file) again.
Prints of up to 999 frames (files) can be ordered on the
same xD-Picture Card.
DPOF settings cannot be specified for movies.
Pressing DISP/BACK while choosing settings will cancel
all current settings. If there were previous DPOF
settings, only the modifications are canceled.
When selecting the WITH DATE setting, the date is
imprinted on your shots using the Print Service or a
DPOF-compatible printer (depending on the printer
specifications, the date may not be printed in some
cases).
Images photographed with a camera other than FinePix
A400 / FinePix A500 may not be specified DPOF
settings.
RESET DPOF OK?
100-0001
YES NO
Using w Playback mode (p.33)
57
Advanced Features — Playback
To cancel all DPOF settings:
Select RESET ALL in the Playback menu (p.55).
DPOF ALL RESET
Press MENU/OK.
u appears on the LCD monitor during playback when the
image has specified DPOF settings.
RESET DPOF OK?
100-0001
YES CANCEL
100-0001
10:00
AM
1/24/2006
Using w Playback mode (p.33)
58
i Protecting Images
Using w Playback mode (p.33)
To protect or unprotect only the selected frame (file):
Use this mode to prevent frames (files) from being accidentally erased. Your camera calls images “frames”.
APress MENU/OK to display the
Playback menu on the LCD
monitor.
BPress p or q to select i
PROTECT.
CPress n or o to select FRAME,
SET ALL, or RESET ALL.
DPress MENU/OK.
PROTECT
RESET ALL
SET ALL
FRAME
FRAME SET / RESET
APress p or q to select the
protecting/unprotecting frame
(file).
BPress MENU/OK to protect/
unprotect the currently displayed
frame (file).
Unprotected: protecting frame
(file)
Protected: reset frame (file)
To protect another frame (file), repeat steps A and B.
When protecting frames (files) is completed, press DISP/
BACK.
PROTECT OK?
100-0001
FRAME
YES CANCEL
Unprotected
100-0001
FRAME
UNPROTECT OK?
YES CANCEL
Protected (F appears)
59
Advanced Features — Playback
SET ALL
Press MENU/OK to protect all the
frames (files).
RESET ALL
Press MENU/OK to unprotect all the
frames (files).
SET ALL
100-0001
YES CANCEL
TAKE A WHILE
SET ALL OK?
IT MAY
RESET ALL
100-0001
YES CANCEL
TAKE A WHILE
RESET ALL OK?
IT MAY
To stop the procedure midway
If the images are very large, protecting or unprotecting all
the frames (files) may take some time.
If you want to take a picture or record a movie during the
procedure, press DISP/BACK.
The Format function erases all the frames (files), including
protected frames (files) (p.75).
100-0001
CANCEL
SET ALL
Using w Playback mode (p.33)
60
g Automatic Playback
Using w Playback mode (p.33)
Use this mode to play back photographed images continuously. You can select playback interval and type of
image transition.
APress MENU/OK to display the
Playback menu on the LCD
monitor.
BPress p or q to select g
PLAYBACK.
CPress n or o to select the
playback interval and the type of
image transition.
DPress MENU/OK. The image
frames are played back
automatically.
PLAYBACK
To interrupt g PLAYBACK, press n or MENU/OK.
•Press p or q to advance or go back through the
images.
The Auto power off function (p.75) does not operate
during playback.
Movie starts automatically. When the movie ends, the
playback function moves it on.
Press DISP/BACK once during playback to display the
frame number and on-screen help.
61
Advanced Features — Playback
V Exchanging Data
Using w Playback mode (p.33)
Selecting COPY
It is possible to transfer saved images between the internal memory and an xD-Picture Card. Your camera
calls images “frames”.
APress MENU/OK to display the
Playback menu on the LCD
monitor.
BPress p or q to select V
COPY.
CPress MENU/OK.
COPY
SET
DPress n or o to select
W INTERNAL MEMORY
CARD or X CARD
INTERNAL MEMORY.
EPress MENU/OK to confirm the
setting.
COPY
INTERNAL MEMORY
CARD
NEXT CANCEL
62
V Exchanging Data
Exchanging one frame at a time
(FRAME)
APress n or o to select FRAME.
BPress MENU/OK.
CPress p or q to select the
copying flame (file).
DPress MENU/OK to copy the
currently displayed frame (file).
To copy another frame (file), repeat steps C and D.
When copying frames (files) is completed, press DISP/
BACK.
COPY
INTERNAL MEMORY
CARD
YES CANCEL
ALL FRAMES
FRAME
YES CANCEL
100-0001
COPY OK?
Exchanging all frames (ALL FRAMES)
APress n or o to select ALL
FRAMES.
BPress MENU/OK.
CPress MENU/OK to copy all the
flames (files).
When [\ MEMORY FULL] or [Y MEMORY FULL]
appears on the LCD monitor, exchanging the data stops
on the way.
When copying the image that has specified DPOF
setting, the DPOF setting is not copied.
COPY
INTERNAL MEMORY
CARD
YES CANCEL
FRAME
ALL FRAMES
YES CANCEL
100-0001
A WHILE
COPY ALL OK?
IT MAY TAKE
Using w Playback mode (p.33)
63
Advanced Features — Playback
Y Trimming
Using w Playback mode (p.33)
1 Select the menu. 2 Specify trimming part of image.
Press DISP/BACK to return to single-frame playback.
Use this mode to trim the required part of the photographed image.
APress p or q to select the
trimming frame (file).
BPress MENU/OK to display the
Playback menu on the LCD
monitor.
CPress p or q to select Y
TRIMMING.
DPress MENU/OK.
TRIMMING
SET
BPress p or q to move to
another part of the image.
CPress n, o, p, or q to display
another part of the image.
Press DISP/BACK to return to the zoom setting.
DPress MENU/OK.
PANNING
YES CANCEL
TRIMMING
PANNING
YES CANCEL
TRIMMING
]
switch
[
switch
APress [(n) or ](o) to
zoom in or out on an image.
Zoom bar
YES CANCEL
TRIMMING
Navigation screen
(Current displayed image)
Continued
64
Y Trimming
3 Record the image.
Check the saved image size and
press MENU/OK.
The trimmed image is added as a
separate file in the final frame.
TRIMMING
REC CANCEL
0. 3
M
REC OK?
A saved image size varies depending on the zoom scale
of step 2. For 0.3 M, k YES option appears in yellow.
Image sizes (FinePix A400)
Image sizes (FinePix A500)
When quality setting is selected, the image is
trimmed to normal size (4:3 aspect ratio).
You may not be able to trim images that were shot with a
camera other than FinePix A400 / FinePix A500.
2
Printing at up to 4R (10.2 × 15.2 cm/4 × 6 in.) /
A6 size
1
Printing at up to 3R (8.9 × 12.7 cm/3.5 × 5 in.)
size
`
To use for e-mail or web site
3
Printing at up to 6R (15.2 × 20.3 cm/6 × 8 in.) /
A5 size
2
Printing at up to 4R (10.2 × 15.2 cm/4 × 6 in.) /
A6 size
`
To use for e-mail or web site
Using w Playback mode (p.33)
65
Advanced Features — Movie
r Recording Movies
1 Set the camera to r Movie mode.
Z Zooming the image
You must zoom beforehand as you cannot zoom during
recording.
Use this mode to record movies.
APress MENU/OK to display the
menu on the LCD monitor.
BPress p or q to select q
SHOOTING MODE.
CPress n or o to select r
MOVIE.
DPress MENU/OK to confirm the
setting.
SHOOTING MODE
MANUAL
MOVIE
AUTO
PORTRAIT
12s
STANDBY
The available recording time
appears on the LCD
monitor.
Optical zoom focal length
Approx. 38 mm to 114 mm (35 mm camera equivalent)
Max. zoom scale: 3×
Focal range
Approx. 60 cm (2.0 ft.) to infinity
12s
STANDBY
Zoom bar
Press [(n) or ](o) to zoom
in or out on an image.
65
Advanced Features — Movie
Continued
66
r Recording Movies
2 Record movies.
Press the shutter button down fully to start recording.
During recording, lREC and a counter that shows the
remaining time appear on the LCD monitor.
There is no need to hold down the shutter button during
recording.
12s
REC
Fully pressed
Recording ends when pressing
the shutter button down
halfway during recording or the
remaining time runs out.
Halfway pressed
Recording movies
Specifications: Motion JPEG (p.120), Without sound
Quality selection method: $ (320 × 240 pixels)
# (160 × 120 pixels)
Frame rate (p.120): 10 frames per second (fixed)
The brightness and color of the LCD monitor shown
during movie recording may differ from those shown
before recording begins.
Pressing the shutter button down fully fixes the focus,
however the exposure and white balance are adjusted to
the scene being shot.
If recording is stopped immediately after it begins, 1
second of the movie is recorded onto the xD-Picture
Card or internal memory.
Because a movie is recorded onto the xD-Picture Card
or internal memory as it is saved, it cannot be recorded
correctly if the camera suddenly loses power (if the
batteries run out or the AC power adapter is
disconnected).
A movie file taken by FinePix A400 / Fine Pix A500 may
not be playable on other cameras.
67
Advanced Features — Movie
Changing movie size
Z Quality settings in Movie mode
$ (320 × 240 pixels): For better quality
# (160 × 120 pixels): To record longer movies
Z Recording times per xD-Picture Card / internal
memory
The following table is the available recording times using the internal
memory or a new
xD-Picture Card
formatted on the camera.
The maximum time you can take a movie at a time is 60
seconds (when setting
$
)/240 seconds (when setting
#
).
APress MENU/OK to display the
menu on the LCD monitor.
BPress p or q to select the y
QUALITY setting.
CPress n or o to change the
setting.
DPress MENU/OK to confirm the
setting.
320 240
160 120
QUALITY
Quality
$ (10 frames
per second)
# (10 frames
per second)
Internal memory (approx. 12MB)
71 sec. 220 sec.
16 MB 94 sec. 288 sec.
32 MB 189 sec. 9.7 min.
64 MB 6.3 min. 19.4 min.
128 MB 12.7 min. 39.0 min.
256 MB 25.5 min. 78.1 min.
512 MB 51.0 min. 156.3 min.
1 GB 102.1 min. 313.0 min.
The quality setting is retained even when the camera is
turned off or the mode setting is changed.
The available recording time for a movie may decrease
depending on the free space on the xD-Picture Card.
If you shoot using the xD-Picture Cards with model
numbers containing “M” such as DPC- M1GB, movie
recording time may be reduced if you repeatedly record
and erase (frame erase) image files.
In such a case, erase all frames or format the picture card
before use. Back up important frames (files) onto your PC
or another media.
68
w Playing Back Movies
Using w Playback mode (p.33)
Z Playing back movies
APress p or q to select the
movie file. r appears on the
LCD monitor.
BPress o to begin playing back
movie.
Control Description
Playback
Playback begins.
Playback stops when the end of
the movie is reached.
Pause /
Resume
Pauses the movie during
playback.
Press o again to resume
playback.
PLAY
30
s
PAU SESTOP
The playback time appears on
the LCD monitor along with a
progress bar.
Progress bar
Stop
Stops playback.
Press p or q while playback is
stopped to go back to the previous
file or advance to the next file
respectively.
Fast
forward /
Rewind
Press p or q during playback to
skip forwards or backwards
through the movie.
Skip
playback
Press p or q when the movie is
paused, the movie advances or
goes back one frame.
Hold down p or q to move
through the frames quickly.
If the subject of the shot is very bright, white vertical
streaks or black horizontal streaks may appear in the
image during playback. This is normal.
You may not be able to play back some movie files
recorded on other cameras.
To play back movie files on a PC, save the movie file on
the xD-Picture Card or internal memory to the PC’s
hard disk and then play back the saved file.
Control Description
69
Settings
Adjusting LCD Monitor Brightness
APress MENU/OK to display the
menu on the LCD monitor.
BPress p or q to select U
OPTION.
CPress n or o to select jLCD.
DPress MENU/OK to confirm the
setting.
OPTION
LCD
SET-UP
EPress p or q to adjust the LCD
monitor brightness.
FPress MENU/OK to confirm the
setting.
SET CANCEL
BRIGHTNESS
69
Settings
70
U SET-UP
Using the SET-UP menu
1 Display the SET-UP menu.
2 Change the setting.
APress MENU/OK to display the
menu on the LCD monitor.
BPress p or q to select U
OPTION.
CPress n or o to select SET-UP.
DPress MENU/OK to display the
SET-UP menu.
OPTION
LCD
SET-UP
APress p or q to move to
options 1 to 4.
BPress n or o to select a menu
option.
CPress p or q to change the
setting.
When selecting FORMAT,
DATE/TIME, TIME
DIFFERENCE, USB MODE,
DISCHARGE, or q RESET,
press q to specify each setting.
DPress MENU/OK to confirm the
setting.
SET-UP
IMAGE DISP.
LCD
FRAME NO.
BEEP
231 4
:ON
:ON
:CONT.
:LOW
SET CANCEL
71
Settings
SET-UP menu option
Setting Display Factory default Explanation Page
1
IMAGE DISP. ON/OFF ON
Specifies whether an image checking screen
(photography result) appears after taking a picture.
The image is displayed for a few moments and then
recorded. The color tones in images recorded may
differ from actual color. Play back the recorded
images to check them.
§ BEEP LOW/HIGH/OFF LOW
Sets the volume of the tone emitted when the
camera controls are used.
FRAME NO. CONT./RENEW CONT.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
73
q LCD ON/OFF ON
Specifies whether the LCD monitor is ON or OFF
when the camera is turned on in Photography
mode.
2
DIGITAL ZOOM ON/OFF OFF Specifies whether degital zoom is used together. 74
AUTO POWER OFF 2 MIN/5 MIN/OFF 2 MIN
Sets the time of turning camera off when camera is
not used.
75
LCD POWER SAVE ON/OFF ON Darkens the LCD monitor when camera is not used. 75
FORMAT OK
Initializes an xD-Picture Card or internal memory.
Select this menu to erase all the frames (files).
75
How to use the SET-UP menu (p.70)
Continued
72
U SET-UP
3
DATE/TIME SET Corrects the date or time. 24
TIME DIFFERENCE SET Specifies the time difference settings. 76
ENGLISH
Specifies the language used for LCD monitor
display. 25
USB MODE SET
@ DSC
Provides a simple way to read images from an xD-
Picture Card or internal memory and store images
onto an xD-Picture Card.
90
< PICTBRIDGE
When a printer that supports PictBridge is available,
images can be printed by connecting the camera
directly to the PictBridge-compatible printer without
a PC.
79
4
VIDEO SYSTEM NTSC/PAL
Specifies whether video output is set to NTSC or
PAL.
DISCHARGE OK Discharges Ni-MH batteries. 101
q RESET OK
Resets all the camera settings (other than the
DATE/TIME, TIME DIFFERENCE, ,
and VIDEO SYSTEM) to the factory default values
set at shipment. A confirmation message appears
when you press q. To reset the camera settings,
press MENU/OK.
Setting Display Factory default Explanation Page
How to use the SET-UP menu (p.70)
73
Settings
Use this function to specify whether frame numbers are
assigned consecutively from previous numbers or begin
again.
FRAME NO.
*
Formatted xD-Picture Card or internal memory used
for both A and B.
CONT. : Pictures are stored beginning from the highest
file number stored on the last xD-Picture Card
or internal memory used.
RENEW: Pictures are stored on each xD-Picture Card
beginning with a file number 0001.
AA
BB
CONT. RENEW
Setting this function to CONT. makes file management
easier as it makes sure that file names are not
duplicated when images are downloaded to a PC.
When the camera settings are q RESET (p.72), the
frame number setting (CONT. or RENEW) is changed to
CONT. and the frame number itself does not return to
0001.
In CONT. setting, images are stored beginning from the
highest file number on the current xD-Picture Card
when the xD-Picture Card already contains image files
with file numbers higher than the highest file number on
the last xD-Picture Card.
File number runs from 0001 to 9999. Once 9999 is
exceeded, the directory number changes from 100 to
101. The maximum number is 999-9999.
The displayed frame number may differ for images
photographed on other cameras.
100-0009
10:00
AM
1/24/2006
File number
Frame number
Directory number
The last 4 digits of the 7-digit number in the top right
corner of the LCD monitor are the file numbers, while
the first 3 digits show the directory number.
How to use the SET-UP menu (p.70)
74
U SET-UP
Use this function to shoot enlarged images than
maximum optical zoom scale.
Zoom bar display
DIGITAL ZOOM
N
12
Zoom bar
Digital zoom OFF Digital zoom ON
Optical zoom: 3×
Optical zoom: 3×
*
FinePix A500
Digital zoom:
approx. 5.2×
*
Optical zoom focal length
*
Approx. 38 mm to 114 mm
Digital zoom focal length
*
FinePix A400
Approx. 114 mm to 410 mm,
max. zoom scale: approx. 3.6×
FinePix A500
Approx. 114 mm to 593 mm,
max. zoom scale: approx. 5.2×
*
35 mm camera equivalents
When zooming changes between optical and digital, the
position of the “ ” indicator stops. Press the same Zoom
switch again to start the “ ” indicator moving again.
Using the digital zoom allows you to enlarge your subject
and shoot it. However, it will lower your image quality. Set
the digital zoom when requiring it.
How to use the SET-UP menu (p.70)
75
Settings
When this function is active and the camera remains
unused for 2 or 5 minutes, it turns camera off.
Use this function when you want to get the maximum
possible running time from your batteries.
The LCD monitor darkens when camera is not used for 10
seconds.
When this function is active, you can save power and get
the maximum possible running time from your batteries.
Initialize (format) the xD-Picture Card or internal memory
for use with the camera.
AUTO POWER OFF
The Auto power off function is disabled during automatic
playback (p.60), discharging rechargeable batteries
(p.101), and when a USB connection (p.80, 90) is
being used.
To restore power to the camera
Refer to “Turning On and Off” (p.21)
LCD POWER SAVE
Pressing any button wakes the camera up.
The LCD power save function is disabled during Playback
mode and Movie mode.
FORMAT
APress p or q to select OK.
BPressing MENU/OK initializes
the xD-Picture Card or internal
memory.
Initializing internal memory takes about 15 seconds.
The Format function erases all the frames (files), including
protected frames (files).
Back up important frames (files) onto your PC or another
media.
FORMAT OK?
ERASE ALL DATA
CANCELOK
SET
FORMAT
Place of initialize
Y FORMAT:
Internal memory
\ FORMAT:
xD-Picture Card
How to use the SET-UP menu (p.70)
76
U SET-UP
Use this function when traveling to destinations in
different time zones. This function sets a time difference
relative to the date and time currently set. When this
setting is enabled, the specified time difference is applied
when pictures are taken.
1 Use Time difference function.
2 Select TIME DIFFERENCE.
TIME DIFFERENCE
Press p or q to change between
N HOME and I LOCAL.
To set the time difference, select
I LOCAL.
N HOME: Your home time zone
I LOCAL: Your destination time
zone
TIME DIFFERENCE
TIME DIFFERENCE
SET
LOCATION
HOME
10:00
AM
1/24/2006
SET CANCEL
APress n or o to select TIME
DIFFERENCE.
BPress q.
TIME DIFFERENCE
LOCATION
LOCAL
10:00
AM
1/24/2006
SET CANCEL
TIME DIFFERENCE
SET
How to use the SET-UP menu (p.70)
77
Settings
3 Set time difference.
APress p or q to select +/–,
hour, and minute.
BPress n or o to change the
setting.
CAlways press MENU/OK after the
settings are completed.
Available time setting
–23:45 to +23:45 (in 15-minute increments)
10:00
AM
1/24/2006
SET CANCEL
TIME DIFFERENCE
+
00 : 00
Upon returning from a trip, always change the time
difference setting back to N HOME.
N
12
1/24/2006
In the time difference setting,
when you change to the
Photography mode, I and
the date is displayed for 3
seconds, the date display
turns yellow.
How to use the SET-UP menu (p.70)
78
Connecting to a TV
When connecting to a TV, images can be displayed on wider screen. Using Automatic playback function
(p.60) together, you can have fun with folks.
Plug the Video cable (included)
into the VIDEO OUT (Video
output) socket of the camera.
Plug the other end of the cable into the
Video input socket on the TV.
Plug the Video cable (included) and the AC power
adapter correctly and push them in each terminal.
See p.101 for the information of the AC power adapter.
When connecting the Video cable to TV, the LCD
monitor is turned off.
The image quality for movie playback is lower than for
still images.
Refer to the instructions provided with your TV for more
information on video input for your TV.
Use the AC-3VX (sold separately) when FinePix A400 /
FinePix A500 is connected to a TV for long periods.
AC-3VX
(sold separately)
To video (yellow) input socket
78
79
Camera Connection
Connecting Camera Directly to Printer — PictBridge Function
Before connecting to a printer
When a printer that supports PictBridge is available, images can be printed by connecting the
camera directly to the PictBridge-compatible printer without a PC.
APress w for about 1 second to
turn the camera on in Playback
mode.
BPress MENU/OK to display the
menu on the LCD monitor.
CPress p or q to select U
OPTION.
DPressn or o to select SET-UP.
EPress MENU/OK to display the
SET-UP menu.
OPTION
LCD
SET-UP
FPress p or q to move to option
3.
GPress n or o to select USB
MODE.
HPress q.
IPress n or o to select
<PICTBRIDGE.
JPress MENU/OK to confirm the
setting.
KPress POWER to turn the
camera off.
USB MODE
THIS MODE IS FOR
PRINTING WITH
PICTBRIDGE PRINTER.
DSC
SET CANCEL
PICTBRIDGE
80
Connecting Camera Directly to Printer — PictBridge Function
Connecting to a printer
AConnect the camera to your printer using the USB
cable (mini-B).
BConnect the camera to a printer before turning the
printer on. Press w for about 1 second to turn the
camera on.
CThe following screen appears on the LCD monitor after
a moment.
Use the AC-3VX (sold separately) when FinePix A400 /
FinePix A500 is connected to a printer for long periods.
; USB
socket (mini-B)
AC-3VX
(sold separately)
If the screen of step C does not appear, check whether
the USB MODE setting is ® PICTBRIDGE.
Depending on the printer, some functions are disabled.
CHECKING USB
USB
“CHECKING USB”
appears on the LCD
monitor.
TOTAL:
SHEETS
100-0001
00000
00
FRAME
OK SET
“Specifying images for
printing without DPOF”
p.81
“Printing with DPOF setting”
p.82
81
Camera Connection
Specifying images for printing
without DPOF (PRINT WITH
DATE / PRINT WITHOUT DATE)
APress p or q to display the
frame (file) for specifying PRINT
setting.
B
Press
n
or
o
to set a value.
Up to 99 sheets are printed.
To specify more PRINT settings, repeat steps A and B.
CPress MENU/OK to display the
confirm setting.
SHEETS
100-0001
02
FRAME
OK SET
TOTAL:
00002
DPress MENU/OK again to
download the data to the printer
and start printing the specified
number of prints.
Even if MENU/OK is pressed with total number of images set
at 0 (zero), the image that is displayed is printed once.
Printing with date
TOTAL
/
PRINT OK?
11
SHEETS
YES CANCEL
APress DISP/BACK to display
the setting display.
BPress n or o to select
PRINT WITH DATE.
CPress MENU/OK.
PICTBRIDGE
SET BACK
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
PRINT WITH DATE is not available when the camera
is connected to a printer that does not support date
printing.
Continued
82
Connecting Camera Directly to Printer — PictBridge Function
Printing with DPOF setting
(u PRINT DPOF)
APress DISP/BACK to display the
menu on the LCD monitor.
BPress n or o to select u
PRINT DPOF.
CPress MENU/OK to display the
confirm setting.
PICTBRIDGE
SET BACK
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
DPress MENU/OK again to
download the data to the printer
and start printing the specified
frames (files) continuously.
To select uPRINT DPOF, the DPOF settings must be
specified on FinePix A400 / FinePix A500 beforehand
(p.55).
Even when WITH DATE is specified in the DPOF settings
(p.55), the date is not inserted on printers that do not
support date printing.
PRINT DPOF
PRINT DROF OK?
YES CANCEL
TOTAL
/
19
SHEETS
83
Camera Connection
Press DISP/BACK to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through.
When printing stops midway, briefly turn the camera off
and then on again.
Disconnecting the printer
ACheck that “PRINTING” is not displayed on the
camera’s screen.
BTurn the camera off. Unplug the USB cable (mini-
B).
CANCEL
PRINT DPOF
PRINTING
DPOF setting can be specified for images on internal
memory.
In PictBridge function, images photographed on other
than a camera may not be printed.
Do not connect to a PC when the USB MODE setting is
set to ® PICTBRIDGE. See p.113 if you connect to
a PC by mistake.
The camera cannot be used to specify printer settings
such as the paper size and print quality.
Use internal memory or an xD-Picture Card that was
formatted on FinePix A400 / FinePix A500.
Movies cannot be printed.
Images photographed with a camera other than FinePix
A400 / FinePix A500 may not be printed.
84
Installation on a Windows PC
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
*
1
Models with one of the above operating systems pre-installed.
*
2
When you install the software, login using a system administrator account (e.g. “Administrator”).
*
3
Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
Pre-installation checklist
Operating System
*
1
Windows 98 (including the Second Edition)
Windows Millennium Edition (Windows Me)
Windows 2000 Professional
*
2
Windows XP Home Edition
*
2
Windows XP Professional
*
2
CPU 200 MHz Pentium minimum
RAM 64 MB minimum (128 MB minimum for Windows XP)
Hard disk space
Amount required for installation: 450 MB minimum
Amount required for operation: 600 MB minimum
Display 800 × 600 pixels or better, 16-bit color or better
Internet connection
*
3
To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
Connection speed: 56 k bps or better recommended
84
85
Software Installation
Z Recommended system
Operating System Windows XP
CPU 2 GHz Pentium 4 or better recommended
RAM 512 MB or better recommended
Hard disk space 2 GB or better
Display 1024 × 768 pixels or better, Highest (32 bit)
Internet connection Broadband (ADSL, FTTH, CATV, etc.)
Connect the camera directly to the PC using the USB cable (mini-B). The software may not operate correctly when you use an
extension cable or connect the camera via a USB hub.
When your PC has more than one USB port, the camera can be connected to either port.
Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
Additional USB interface board is not guaranteed.
Windows 95 and Windows NT cannot be used.
Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.
When you reinstall or remove FinePixViewer, the Internet menu and your user ID and password for the FinePix Internet Service
are deleted from your PC. Click the [Register now] button, enter your registered user ID and password and download the menu
again.
86
Installation on a Windows PC
Do not connect the camera to your PC
until the software installation is
completed.
1 Install FinePixViewer as instructed in the
Quick start guide.
2 Install DirectX as directed by the on-screen
instructions and then restart your PC. If the
latest version of DirectX is already installed
on your PC, this installation is not
performed.
3 After restarting the PC, a message appears
stating “Installation of the FinePixViewer
has been completed”.
Launching the installer manually
A Double-click the “My Computer” icon.
*
Windows XP users should click “My Computer” in the
“Start” menu.
B Right-click “FINEPIX” (CD-ROM drive) in the “My
Computer” window and select “Open”.
C Double-click “SETUP” or “SETUP.exe” in the CD-ROM
window.
*
The way file names are displayed differs as described
below depending on your PC settings.
-File extensions (3-letter suffixes indicating the file type)
may be shown or hidden. (e.g. Setup.exe or Setup)
-Text may be shown normally or all in uppercase (e.g.
Setup or SETUP).
If the latest version is already installed, this window does
not appear.
Do not remove the CD-ROM during this procedure.
87
Software Installation
Installation on a Mac OS X
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
*
1
Models with a USB port as a standard feature
*
2
This software does not support QuickTime 7.
*
3
Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
Pre-installation checklist
Compatible Mac
Power Macintosh G3
*
1
, PowerBook G3
*
1
,
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, PowerBook G4, or Power Macintosh G5
Operating System Mac OS X (compatible with version 10.2.8 to 10.3.9)
*
2
RAM
192 MB minimum
256 MB or better recommended
Hard disk space
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
Display 800 × 600 pixels or better, at least 32,000 colors
Internet connection
*
3
To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
Connection speed: 56 k bps or better recommended
Connect the camera directly to the Macintosh using the USB cable (mini-B). The software may not operate correctly if you use an
extension cable or connect the camera via a USB hub.
Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
Additional USB interface board is not guaranteed.
Continued
88
Installation on a Mac OS X
1 Turn your Macintosh on and start up Mac
OS X. Do not launch any other applications.
2 When the bundled CD-ROM is loaded into
the CD-ROM drive, the “FinePix” icon
appears. Double-click the “FinePix” icon to
open the “FinePix” volume window.
\
3 Double-click on “Installer for MacOSX”.
4 The Installer setup dialog appears. Click the
[Installing FinePixViewer] button.
5 The “Authenticate” dialog appears.
Enter the name and password for the
administrator account and then click the
[OK] button.*
*
The administrator account is the user account used for
Mac OS X installation and you can confirm the user
account in the Accounts dialog in the System
Preferences.
6 The “License” dialog appears. Read the
agreement carefully and then, if you agree
to the terms of the Agreement, click the
[Accept] button.
7 The “Read me” dialog appears. Click the
[Continue] button.
8
The “FinePixInstallOSX” window appears.
Click the [Install] button to install
FinePixViewer.
For more information on what is installed, click the [Read
Me First] button and [Using FinePixViewer] button.
89
Software Installation
9 The “FinePixViewer installation completed”
message dialog appears. Then click exit
button and close it.
10
Launch “Image Capture” from the
“Applications” folder.
11
Change the Image Capture settings.
Select “Preferences...” from the “Image
Capture” menu.
12
Select “Other...” from “When a camera is
connected, open”.
13
Select “FPVBridge” from “FinePixViewer”
folder in the “Applications” folder and click
the [Open] button.
14
Select “Quit Image Capture” menu in the
“Image Capture” menu.
When Safari is used as the Web browser, a message may
be displayed and the CD-ROM may not be removed. If this
happens, click the Safari icon in the Dock to make Safari
the active application and then select “Quit Safari” in the
“Safari” menu to shut down Safari.
90
Connecting to a PC
By connecting the camera to a PC, your system can be expanded to fill a wide range of uses. Using
“FinePixViewer” performs images saving, browsing and file management etc.
If the power cuts out during data transmission, the data will
not be transmitted correctly. Always use the AC power
adapter when connecting the camera to a PC.
AInsert the xD-Picture Card with images into the
camera (p.18).
Do not format the xD-Picture Card in the camera on the
PC.
Use the xD-Picture Card with images taken by a
FUJIFILM Digital camera.
BPress w for about 1 second to
turn the camera on in Playback
mode.
CPress MENU/OK to display the
SET-UP menu.
Refer to “Using the SET-UP
menu” (p.70).
CD-ROM
(Software for FinePix BZ)
Refer to Software
Installation (p.84, 87)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
the PC before installing all
the software.
DSelect @ DSC in L USB
MODE in the SET-UP menu
(p.72).
EPress POWER to turn the
camera off.
FTurn your PC on.
GConnect the camera to your PC using the USB cable
(mini-B).
HPress w for about 1 second to
turn the camera on in Playback
mode.
USB MODE
THIS MODE IS FOR
SENDING IMAGE DATA
TO PC.
SET CANCEL
PICTBRIDGE
DSC
; USB
socket
(mini-B)
AC-3VX
(sold separately)
91
Software Installation
ISet a PC
Windows 98 / 98 SE / Me / 2000 Professional /
Macintosh
FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears. Follow the instructions provided on screen to
save the images. To proceed without saving the
images, click the [Cancel] button.
A removable disk icon appears and you can use your
PC to transfer files to and from the camera.
When displaying “CHECKING USB”
If “CHECKING USB” appears and then
[COMMUNICATION ERROR] is displayed on the LCD
monitor, @ DSC is not selected in USB MODE.
Disconnect the USB cable (mini-B) to the camera and
restart the procedure from step C.
Always use the FUJIFILM AC Power Adapter AC-3VX
(sold separately). If the camera suddenly loses power
during data exchange, the xD-Picture Card or internal
memory could be damaged.
Do not disconnect the USB cable (mini-B) when the
camera is communicating with a PC. If disconnecting the
USB cable (mini-B) during communication, the files on
the xD-Picture Card or internal memory may cause
damage.
In Mac OS X, you must set the automatic setup when the
first time you connect the camera to your PC.
Make sure that USB cable (mini-B) is connected
correctly and pushed in.
Perform pre-arranged steps to disconnect and turn off
the camera (p.92).
When the camera and PC are exchanging data, the self-
timer lamp blinks and the viewfinder lamp blinks orange.
Auto power off is disabled during USB connection.
Before replacing the xD-Picture Card, always
disconnect the camera from the PC. See p.92 for
information on the disconnection procedure.
The camera and PC may be exchanging data even
when “Copying” disappears on your PC screen. Before
disconnecting the USB cable (mini-B), always check that
the viewfinder lamp lights green.
The Windows CD-ROM may also be required during
installation. In this event, change CD-ROMs as directed by
the on-screen instructions.
*
Screen for Windows 98 SE
Windows Macintosh
92
Connecting to a PC
Windows XP
AThe “Found New Hardware” help message appears in
the bottom-right corner of your screen. This message
will close when the settings are completed. No action
is required.
BSpecify the settings in the “AutoPlay” dialog box.
When FinePixViewer is included in the list of
actions to perform
Select “Viewing images using FinePixViewer” and then
select the “Always do the selected action” checkbox.
This checkbox may not be shown in some cases.
Click the [OK] button to launch FinePixViewer.
When FinePixViewer is not included in the list of
actions to perform
Select “Take no action” and then select the “Always do
the selected action” checkbox. This checkbox may not
be shown in some cases.
Click the [OK] button and launch FinePixViewer
manually.
CA new removable disk icon appears in the “My
Computer” window.
FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears. Follow the instructions provided on screen to
save the images. To proceed without saving the
images, click the [Cancel] button.
1 Windows
Once the image has been saved, the window below
appears (Save Image Wizard Windows). To
disconnect the camera, click the [Remove] button.
If the above operations do not occur, you do not have the
required software programs or drivers installed on your
PC. Complete the required PC setup procedures. Then
reconnect the camera to your PC.
This step is not required for subsequent connections.
Regarding the icons
The next time you connect the camera, the removable disk
drive icon’s name changes to the “FinePix” icon and name.
Proceed to “USING FinePixViewer” (p.93).
Disconnecting the camera
93
Software Installation
When the “It is now safe to disconnect the camera”
message appears, click the [OK] button and
disconnect the camera.
Macintosh
Once the image has been saved, the window below
appears. To disconnect the camera, click the [OK]
button.
Using FinePixViewer
For all information on FinePixViewer functions, refer to
“How to Use FinePixViewer” in the Help menu for details.
What is explained in “How to Use FinePixViewer”...
“How to Use FinePixViewer” covers a range of topics,
including batch processing and ordering prints.
Z Example: Looking up slide shows (Windows)
AClick “How to Use FinePixViewer” in the FinePixViewer
Help menu.
BClick “Basic Operation” and then click “Slide Show” in
the menu that appears.
CThe “Slide Show” information appears. Press the “<<<”
key to view the previous page or the “>>>” key to view
the next page.
2
; USB socket
(mini-B)
AC-3VX
(sold separately)
APress POWER to turn the
camera off.
BUnplug the USB cable (mini-B) from the camera.
Mastering FinePixViewer
94
Connecting to a PC
Only perform this operation when you no longer require
the installed software or when the software was not
installed correctly.
Windows
ACheck that the camera is not connected to the PC.
BQuit all currently running applications.
COpen the “My Computer” window. Then open the
“Control Panel” and double-click on “Add/Remove
Programs”.
DThe “Add/Remove Programs Properties” window
appears. Select the software to be uninstalled
(FinePixViewer or the driver) and then click the [Add/
Remove] button.
EWhen the message appears, click the [OK] button.
Check your selection carefully since the process
cannot be canceled once you click the [OK] button.
FAutomatic uninstallation begins.
When uninstallation ends, click the [OK] button.
Macintosh
Quit FinePixViewer. Then drag the installed
FinePixViewer folder to the Trash and select “Empty
Trash” in the “Finder” menu.
Uninstalling the software
43
43
To remove FinePixViewer
To remove the driver
software
95
Appendices
System Expansion Option
By using FinePix A400 / FinePix A500 together with other optional FUJIFILM products, your system can be
expanded to fill a wide range of uses.
C
O
M
P
A
C
T
F
L
A
S
H
D
P
C
-C
F
T
M
f
o
r
xD
-P
ic
tu
re
Ca
rd
C
A
R
D
A
D
A
P
T
E
R
Z Video output
TV monitor
(commercially available)
Video output
Z
Print creation
USB
PictBridge-compatible printer
Printer
(commercially available)
xD-Picture
Card
Z
Image input / output to the PC
Personal Computer
(commercially available)
Image Memory Card
Reader DPC-R1
PC Card Adapter DPC-AD
CompactFlash™
Card Adapter DPC-CF
(USB)
(PC card slot)
(CF card slot)
USB
95
Appendices
96
Accessories Guide
Visit the FUJIFILM web site for the latest information on camera accessories.
http://home.fujifilm.com/products/digital/index.html
• xD-Picture Card
Use the following xD-Picture Cards:
16MB/32MB/64MB/128MB/256MB/512MB/1GB
There are two types of xD-Picture Card: standard type and Type M (containing “M” in the model
number, such as DPC-M1GB).
FinePix A400/FinePix A500 are compatible with Type M, however they may not be compatible
depending on the device used (Image Memory Card Reader, etc.).
Fujifilm Rechargeable Battery 2HR-3UF
The 2HR-3UF includes 2 pieces of high-capacity AA-size Ni-MH (nickel-metal hydride) batteries.
Fujifilm Battery Charger with Battery BK-NH2
(With Euro type or UK type plug)
The BK-NH2 includes the quick battery charger BCH-NH2 and 2 Ni-MH batteries. The BCH-NH2 can
charge 2 Ni-MH batteries in approx. 75 minutes. Up to 4 Ni-MH batteries can be charged simultaneously.
AC Power Adapter AC-3VX
Use the AC-3VX when taking pictures or play back images for long periods or when FinePix A400 /
FinePix A500 is connected to a PC.
*
The shape of the AC power adapter, the plug, and socket outlet depend on the country.
Soft Case SC-FXA03
This is a special case made of nylon that protects the camera against soil, dust, and minor impacts when it is being carried.
Soft Case SC-FXA04
This is a special case made of polyurethane that protects the camera against soil, dust, and minor impacts when it is being carried.
97
Appendices
Image Memory Card Reader DPC-R1
The DPC-R1 provides a quick and easy way to transfer images back and forth between your PC and an
image memory card (xD-Picture Card and SmartMedia). The DPC-R1 uses the USB interface for high-
speed file transfer.
-Compatible with Windows 98/98 SE, Windows Me, Windows 2000 Professional, Windows XP or iMac,
Mac OS 8.6 to 9.2.2, Mac OS X (10.1.2 to 10.2.2) and models that support USB as standard.
-Compatible with xD-Picture Card of 16 MB to 512 MB, and SmartMedia of 3.3 V, 4 MB to 128 MB.
*
Accessory availability may vary by country. Please check with your local Fujifilm representative to
confirm product availability.
PC Card Adapter DPC-AD
The PC Card Adapter allows the xD-Picture Card and SmartMedia to be used as a PC Card Standard
ATA-compliant (PCMCIA 2.1) PC card (Type u).
-Compatible with xD-Picture Card of 16 MB to 512 MB, and SmartMedia of 3.3 V, 2 MB to 128 MB.
*
Accessory availability may vary by country. Please check with your local Fujifilm representative to
confirm product availability.
CompactFlash™ Card Adapter DPC-CF
Loading an
xD-Picture Card
into this adapter allows you to use the card as a CompactFlash card (Type
s
).
-Windows 95/98/98 SE/Me/2000 Professional/XP
-Mac OS 8.6 to 9.2/X (10.1.2 to 10.1.5)
*
Accessory availability may vary by country. Please check with your local Fujifilm representative to
confirm product availability.
C
O
M
P
A
C
T
FL
A
S
H
D
P
C
-C
F
T
M
f
o
r
x
D
-P
ic
tu
re
C
a
rd
C
A
R
D
A
D
A
P
T
E
R
98
Using Your Camera Correctly
Z Places to Avoid
Do not store or use the camera in the following types of
locations:
In the rain or in very humid, dirty, or dusty places
In direct sunlight or in places subject to extreme
temperature rises, such as in a closed car in summer
Extremely cold places
Places with strong vibration
Places with smoke or steam
Places subject to strong magnetic fields (such as near
motors, transformers, or magnets)
In contact with chemicals such as pesticides
Next to rubber or vinyl products
Z Damaged by Water or Sand
FinePix A400 / FinePix A500 can be damaged on the
inside and outside by water and sand. When you are at
the beach or close to water, make sure that the camera is
not damaged by water or sand. Take care not to place the
camera on a wet surface.
Z Damaged by Condensation
If the camera is carried from a cold location into a warm
place, water droplets (condensation) may form on the
inside of the camera or on the lens. When this occurs, turn
the camera off and wait an hour before using the camera.
Condensation may also form on the xD-Picture card. In
this event, remove the xD-Picture card and wait a short
time.
Z When the Camera is Not Used or is stored Periods
of Time
If you do not intend to use the camera for a long period of
time, remove the batteries and the xD-Picture card.
Z Cleaning Your Camera
Use a blower brush to remove any dust on the lens,
LCD monitor, or viewfinder, and then gently wipe the
camera with a soft, dry cloth. If any soil remains, apply
a small amount of lens cleaning liquid to a piece of
FUJIFILM lens cleaning paper and wipe gently.
Do not scratch hard objects against the lens, LCD
monitor, or viewfinder.
Clean the body of the camera with a soft, dry cloth. Do
not use volatile substances or cleaning products these
items can cause damage.
Z Using the Camera When Traveling
When traveling overseas, do not place your camera in the
check-in baggage. Baggage can be subjected to violent
shocks, and the camera may be damaged inside or
outside.
Read this information and the “Safety Notes” (p.128), to make sure you use your camera correctly.
99
Appendices
Power Supply and Batteries
Applicable Batteries
In the camera, use AA-size alkaline or Ni-MH (nickel-
metal hydride) rechargeable batteries.
Do not use AA-size manganese or nickel-cadmium (Ni-
Cd) batteries in your FinePix A400 / FinePix A500
because the heat created by the batteries could
damage the camera or cause it not to work.
The life of alkaline batteries varies between brands. The
life of batteries you purchase may be shorter than those
provided with the camera.
Notes on the Batteries
Incorrect use of the batteries could cause them to leak,
become hot, ignite, or burst. Always observe the
precautions given below.
Do not heat the batteries or throw them into a fire.
Do not carry or store batteries with metal objects such
as necklaces or hairpins.
Do not expose the batteries to water, and keep batteries
from getting wet or stored in moist locations.
Do not attempt to take apart or change the batteries,
including battery casings.
Do not subject the batteries to strong impacts.
Do not use batteries that are leaking, deformed,
discolored.
Do not store batteries in warm or humid places.
Keep the batteries out of reach of babies and small
children.
Make sure that the battery polarity (+ and ,) is
correct.
Do not use new with used batteries. Do not use charged
and discharged batteries together.
Do not use different types or brands of batteries at the
same time.
If you do not intend to use the camera for a long period
of time, remove the batteries from the camera. Note if
the camera is left with the batteries removed, the time
and date settings are cleared.
The batteries feel warm right after being used. Before
removing the batteries, turn the camera off and wait for
the batteries to cool down.
Since batteries do not work well in cold weather or
locations, warm the batteries by placing them inside
your garments before use. Batteries do not work well
when cold. They will work again when the temperature
returns to normal.
Soil (such as fingerprints) on the battery terminals
makes the batteries charge less reducing the number of
images. Carefully wipe the battery terminals with a soft
dry cloth before loading.
If any liquid at all leaks from the batteries, wipe the
battery compartment thoroughly and then load new
batteries.
If any battery fluid comes into contact with your hands
or clothing, flush the area thoroughly with water. Note
that battery fluid can cause loss of eyesight if it gets
into your eyes. If this occurs, do not rub your eyes.
Flush the fluid out with clean water and contact your
physician for treatment.
Continued
100
Power Supply and Batteries
Using the AA-size Ni-MH batteries correctly
As a power source in digital cameras, AA-size Ni-MH
batteries (referred to hereafter as Ni-MH batteries) are
superior to alkaline batteries in several ways, such as
allowing more shots to be taken with the camera.
However, care must be taken with the way Ni-MH
batteries are used if their original performance is to be
maintained.
Ni-MH batteries left unused in storage for long periods
can become “deactivated”. Also, repeatedly charging
Ni-MH batteries that are only partially discharged can
cause them to suffer from the “memory effect”.
Ni-MH batteries that are “deactivated” or affected by
“memory” suffer from the problem of only providing
power for a short time after being charged. To prevent
this problem, discharge and recharge them several
times using the camera’s “Discharging rechargeable
batteries” function. By repeating this cycle several
times, the temporary reduction in performance caused
by “memory” or “deactivation” can be remedied and the
batteries can be restored to their original performance
levels.
Deactivation and memory are specific to Ni-MH
batteries and are not in fact battery faults. See p.101-
102 for the procedure for “Discharging rechargeable
batteries”.
Do not use the “Discharging rechargeable batteries”
function when alkaline batteries being used.
To charge Ni-MH batteries, use the quick battery
charger (sold separately). Refer to the instructions
supplied with the charger to make sure that the charger
is used correctly.
Do not use the battery charger to charge other batteries.
Note that the batteries feel warm after being charged.
Due to the way the camera is constructed, a small
amount of current is used even when the camera is
turned off. Note in particular that leaving Ni-MH
batteries in the camera for a long period will
overdischarge the batteries and may render them
unusable even after recharging.
Ni-MH batteries will self-discharge even when not used,
and the time for which they can be used may be
shortened as a result.
Ni-MH batteries will deteriorate rapidly if
overdischarged (e.g. by discharging the batteries in a
flashlight). Use the “Discharging rechargeable
batteries” function provided in the camera to discharge
the batteries.
Ni-MH batteries have a limited service life. If a battery
can only be used for a short time even after repeated
discharge-charge cycles, it may have reached the end
of its service life.
Z Disposing of Batteries
When disposing of batteries, do so in accordance with
your local waste disposal regulations.
101
Appendices
Discharging rechargeable
batteries
The Discharging rechargeable batteries function can only
be used with Ni-MH batteries.
The Discharging rechargeable batteries function should
not be used with alkaline batteries as it will completely
drain the battery charge.
Use the Discharging rechargeable batteries function in
the following situations:
When the batteries only last for a short time after being
charged normally
When the batteries have not been used for a long period
When you purchase new Ni-MH batteries
Do not use the Discharging rechargeable batteries
function while using the AC power adapter. In these
situations, the Ni-MH batteries will not be discharged due
to the external power supply.
AC Power Adapter
Always use the AC Power Adapter AC-3VX with the
camera.
The use of an AC power adapter other than AC-3VX can
be damaged to your digital camera.
Use the AC power adapter for indoor use only.
Plug the connection cord plug securely into the DC input
terminal of the FUJIFILM Digital camera.
Turn off the FUJIFILM Digital camera before
disconnecting the cord from the FUJIFILM Digital
camera’s DC input terminal. To disconnect, pull out the
plug gently. Do not pull on the cord.
Do not use the AC power adapter with any device other
than your camera.
During use, the AC power adapter will become hot to
the touch. This is normal.
Do not take apart the AC power adapter. Doing so could
be dangerous.
Do not use the AC power adapter in a hot and humid
place.
Do not subject the AC power adapter to strong shocks.
The AC power adapter may emit a humming. This is
normal.
If used near a radio, the AC power adapter may cause
static. If this happens, move the camera away from the
radio.
Continued
102
Power Supply and Batteries
To discharge rechargeable batteries:
APress w for about 1 second to
turn the camera on.
BPress MENU/OK to display the
menu on the LCD monitor.
CPress p or q to select U
OPTION.
DPress n or o to select SET-UP.
EPress MENU/OK to display the
SET-UP menu.
FPress p or q to move to option
4.
GPress n or o to select
DISCHARGE.
SET-UP
VIDEO SYSTEM
RESET
231
4
:NTSC
:OK
SET CANCEL
DISCHARGE OK
HPress q.
IPress MENU/OK.
JPress p or q to select OK.
KThe screen changes and
discharging begins.
When the battery level indicator
blinks red and discharging ends,
the camera turns off.
To cancel discharging, press DISP/BACK.
IT MAY TAKE A
DISCHARGE OK?
DISCHARGING
WHILE FOR
CANCELOK
SET
DISCHARGE
103
Appendices
Notes on the
xD-Picture Card
™ and the Internal Memory
Z Image Memory Card
This Image Memory Card is a new image recording
media (xD-Picture Card) developed for digital
cameras. The Image Memory Card consists of a
semiconductor memory (NAND-type flash memory) to
record digital image data.
The recording process is electrically performed and
enables erasure of existing image data as well as re-
recording of new image data.
When using a new Memory Card, or a Memory Card
that has been formatted by a PC, be sure to format the
card with your digital camera before using it.
Z Internal Memory
Images held in the camera’s internal memory may be
corrupted or erased due to problems such as camera
faults. Save your important data to another media (i.e.,
MO disk, CD-R, CD-RW, hard disk, etc.).
Data stored in the camera’s internal memory cannot be
guaranteed in the event that the camera is submitted for
repairs.
When the camera is repaired, any data stored in the
camera’s internal memory is subject to checking by the
repairer.
Z Protecting Your Data
Images and movies may be lost or destroyed in the
following situations. Please note that FUJIFILM
assumes no responsibility for data that is lost or
destroyed.
1.Removal of the memory card or turning the power off
while the memory card or internal memory is being
accessed (i.e., during record, erase, initialization, and
playback operations).
2.Improper handling and use of the memory card or
internal memory by the user or third party.
Z Handling xD-Picture Card
When storing xD-Picture Cards, make sure that they
are kept out of the reach of children. An xD-Picture
Card could be swallowed cause suffocation. If a child
swallows an xD-Picture Card, seek medical attention
or call emergency number right away.
When inserting the xD-Picture Card into the camera,
hold the xD-Picture Card straight as you push it in.
Do not expose an xD-Picture Card to shock. Do not
apply pressure, and avoid bending.
Do not use or store xD-Picture Card in hot and humid
places.
Clean the xD-Picture Card with a soft dry piece of cloth
when dirty.
When carrying or storing an xD-Picture Card, keep it in
the special protective case.
•The xD-Picture Card will work well for long time, but will
sooner or later lose its ability to store and play back
images or movies. If this happens replace it with a new
xD-Picture Card.
Never remove the xD-Picture Card or turn the camera
off during data recording or erasing (xD-Picture Card
formatting) as this could be damaged to the xD-Picture
Card.
The use of xD-Picture Cards is recommended with
FinePix A400 / FinePix A500.
The recording quality cannot be guaranteed when xD-
Picture Cards other than those manufactured by
FUJIFILM are used.
Save your important data to another media (i.e., MO disk,
CD-R, CD-RW, hard disk, etc.).
Continued
104
Notes on the xD-Picture Card™ and the Internal Memory
•The xD-Picture Card may feel warm when it is removed
from the camera after taking pictures. This is normal.
Do not put labels on the xD-Picture Card. Peeling
labels can cause the camera not to work properly.
Z Using xD-Picture Card or Internal Memory with a
PC
When taking pictures using an xD-Picture Card or
internal memory that has been used on a PC, reformat
the xD-Picture Card or internal memory using your
camera for best quality.
When formatting an xD-Picture Card or internal
memory, a directory (folder) is created. Image data is
then recorded in this directory
Do not change or delete the directory (folder) or file
names on the xD-Picture Card or internal memory
because this will make it impossible to use the xD-
Picture Card or internal memory in your camera.
Always use the camera to erase image data on an xD-
Picture Card or internal memory.
To edit image data, copy the image data to the PC and
edit the copy.
Z Specifications
There are two types of xD-Picture Card: standard type
and Type M (containing “M” in the model number, such as
DPC-M1GB).
FinePix A400/FinePix A500 are compatible with Type M,
however they may not be compatible depending on the
device used (Image Memory Card Reader, etc.).
Type Image memory card for digital
cameras (xD-Picture Card)
Memory type NAND-type flash memory
Conditions for use Temperature:
0°C to +40°C
(+32°F to +104°F)
Humidity:
80% max. (no condensation)
Dimensions 25 mm × 20 mm × 2.2 mm
(0.98 in. × 0.79 in. × 0.09 in.)
(W × H × D)
105
Appendices
Warning Displays
The table below lists the warnings that are displayed on the LCD monitor.
Warning Displayed Explanation Remedy
C (Lit red)
V (Blinking red)
The batteries are low or completely out of charge. Load new or fully charged batteries.
|
There is a strong likelihood of camera shake
because the shutter speed is slow.
Use flash photography. A tripod may be
recommended, depending on the scene and mode.
{
The AF (autofocus) cannot work effectively. If the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
Use AF lock to take the picture (p.30).
}
The camera cannot shoot the picture at the correct
brightness due to too bright or dark shooting
condition.
The picture can be taken, but the correct brightness
(exposure) will not be obtained.
FOCUS ERROR
ZOOM ERROR
Camera malfunction or fault. Turn the camera on again, taking care not to touch
the lens.
Turn the camera off and on again. If the message
still appears, contact your FUJIFILM dealer.
NO CARD
xD-Picture Card is not inserted when transferring
images.
Insert an xD-Picture Card.
CARD NOT INITIALIZED
The xD-Picture Card or internal memory is not
formatted.
The xD-Picture Card contact area is soiled.
Format the xD-Picture Card or internal memory
on the camera (p.75).
Wipe the contact area on the xD-Picture Card
with a soft, dry cloth. It may be necessary to format
the xD-Picture Card (p.75). If the message still
appears, replace the xD-Picture Card.
Camera fault. Contact your FUJIFILM dealer.
CARD ERROR
The xD-Picture Card contact area is soiled.
The xD-Picture Card format is incorrect.
Wipe the contact area on the xD-Picture Card
with a soft, dry cloth. It may be necessary to format
the xD-Picture Card (p.75). If the message still
appears, replace the xD-Picture Card.
Camera fault.
The xD-Picture Card is damaged.
Contact your FUJIFILM dealer.
Continued
106
Warning Displays
CARD FULL
\ MEMORY FULL
Y MEMORY FULL
The internal memory or xD-Picture Card is full. Erase some images in internal memory or xD-
Picture Card (p.36), or use an xD-Picture Card
that has ample free space.
WRITE ERROR
The data could not be recorded due to an xD-
Picture Card error or a connection error between
the xD-Picture Card and camera.
The image cannot be recorded as it is too large to
fit in the available space on the xD-Picture Card.
Re-insert the xD-Picture Card or turn the camera
off and then on again. If the message still appears,
contact your FUJIFILM dealer.
Use a new xD-Picture Card.
BUSY
The timing for recording was incorrect because the
xD-Picture Card was formatted on a PC.
Use an xD-Picture Card that was formatted on the
camera.
FRAME NO. FULL
The frame number has reached 999-9999. A Insert a formatted xD-Picture Card into the
camera.
B Set RENEW as the FRAME NO. setting in the
U SET-UP menu (p.73).
C Start taking pictures (The frame number starts
from “100-0001”).
D Set CONT. as the FRAME NO. setting in the U
SET-UP menu.
READ ERROR
The played back file was not recorded correctly.
The xD-Picture Card contact area is soiled.
This file cannot be played back.
Wipe the contact area on the xD-Picture Card
with a soft, dry cloth. It may be necessary to format
the xD-Picture Card. If the message still appears,
replace the xD-Picture Card.
Camera fault.
An attempt was made to play back the image or the
movie that was not recorded on this camera.
Contact your FUJIFILM dealer.
The movie and image cannot be played back.
PROTECTED FRAME
A protected file was encountered. Protected files cannot be erased. Remove the
protection (p.58).
Warning Displayed Explanation Remedy
107
Appendices
\ NO IMAGE
Y NO IMAGE
An attempt was made to transfer images from the
xD-Picture card or internal memory that memory
was empty.
It is impossible to copy.
` CAN NOT TRIM An attempt was made to trim a 0.3M image. The image cannot be trimmed.
CAN NOT TRIM
An attempt was made to trim an image shot using
a camera other than FinePix A400 / FinePix A500.
The image is damaged.
The image cannot be trimmed.
DPOF FILE ERROR
Prints were specified for 1000 or more frames in the
DPOF frame settings.
The maximum number of frames for which prints can
be specified on the same xD-Picture Card is 999.
Copy the images for which you want to order prints
onto another xD-Picture Card and then specify the
DPOF settings.
CAN NOT SET DPOF
r CAN NOT SET DPOF
An attempt was made to specify DPOF settings for
an image that is not supported by DPOF.
DPOF printing cannot be used with this image
format.
COMMUNICATION
ERROR
The camera is not connected to a PC or printer. Check that the USB cable (mini-B) is connected
correctly.
Check that your printer is turned on.
PRINTER ERROR
Displayed for PictBridge. Check that the printer is not out of paper or out of
ink.
Turn the printer off briefly and then turn it back on.
Refer to the user manual supplied with your
printer.
PRINTER ERROR
RESUME?
Displayed for PictBridge. Check that the printer is not out of paper or out of ink.
Printing automatically restarts when the error is
cleared. If the message still appears after checking,
press MENU/OK to restart printing.
Warning Displayed Explanation Remedy
Continued
108
Warning Displays
CANNOT BE PRINTED
Displayed for PictBridge. Refer to the user manual for the printer being used
and check whether the printer supports the JFIF-
JPEG or Exif-JPEG image format. If not, the printer
cannot print the images.
Movie images cannot be printed.
Was the image data photographed using FinePix
A400 / FinePix A500?
You may not be able to print some images
photographed on other cameras.
Warning Displayed Explanation Remedy
109
Troubleshooting
Troubleshooting
Z Getting ready
Z Setting menu etc.
Matters Problems Possible causes Solutions Page
Batteries and
power supply
Nothing happens
when pressing
POWER.
The batteries have run out. Load new or fully charged batteries. 15,
17, 99
The batteries are loaded backward. Load the batteries in the correct direction. 16
The battery cover is not closed securely. Close the battery cover securely. 16
The camera and AC power adapter are not
connected correctly.
Connect the camera and AC power
adapter correctly.
78,
101
Batteries run out
quickly.
Camera is used in extremely cold
conditions.
Put the batteries in your pocket or another
warm place to heat it and then load it into
the camera just before you take a picture.
15,
17, 99
The terminals are soiled. Wipe the battery terminals with a clean,
dry cloth.
17, 99
Same batteries have been used for a long
period.
The batteries can no longer be recharged.
Load new or fully charged batteries.
15,
17, 99
The rechargeable batteries (if used) have
become deactivated, or the battery
capacity has diminished due to the
memory effect.
Use the rechargeable battery discharging
function to restore the rechargeable
batteries to full capacity.
101
Power cuts out
during operation.
The batteries have run out. Load new or fully charged batteries. 15,
17, 99
The AC power adapter plug has come out
of the power outlet.
Plug the adapter back in. 78,
101
Matters Problems Possible causes Solutions Page
LCD monitor
display
Screens are not
displayed in
English.
A language other than English is selected
in the setting in the SET-UP
menu.
Select ENGLISH.
25
109
Troubleshooting
Continued
110
Troubleshooting
Z Shooting
Matters Problems Possible causes Solutions Page
Basic operations
No photograph is
taken when
pressing the
shutter button.
The xD-Picture Card or internal memory
is full.
Insert a new xD-Picture Card or erase
some unnecessary frames.
18, 36
The xD-Picture Card or internal memory
is not formatted.
Format the xD-Picture Card or internal
memory on the camera.
70, 75
The xD-Picture Card contact area is
soiled.
Wipe the xD-Picture Card contact area
with a soft, dry cloth.
18,
103
The xD-Picture Card is damaged. Insert a new xD-Picture Card.18
The batteries have run out. Load new or fully charged batteries. 15,
17, 99
The Auto power off function has turned the
camera off.
Turn the camera on.
21
The LCD monitor
darkens after
taking a picture.
You took pictures with flash. The LCD monitor may darken for charging
flash. Wait a short time. 44
Focusing
Camera has
difficulty in
focusing on the
subject.
You took a close-up shot without selecting
Macro mode.
Select Macro mode.
42
You photographed scenery with Macro
mode selected.
Cancel Macro mode.
42
You are shooting a subject that is not
suited to autofocusing (p.31).
Use AF/AE lock to take the picture.
30
111
Troubleshooting
Z Shooting
Matters Problems Possible causes Solutions Page
Flash
Cannot use the
flash.
The shutter button was pressed while the
flash was charging.
Wait until the charging is completed before
pressing the shutter button.
44
The Shooting mode is set to ,. Change the Shooting mode. 40
The batteries have run out. Load new or fully charged batteries. 15,
17, 99
The flash settings
are restricted and
cannot be
selected.
The Shooting mode is set to a, ,, .,
or 8.
The flash settings are restricted because
the camera settings are tailored to the
scene being shot. Change the Shooting
mode for a wider range of flash settings.
40
The playback
image is dark
even though the
flash was used.
The subject is too far away. Move to within the effective flash range
before taking the picture.
42, 44
Your finger was covering the flash. Hold the camera correctly.
26, 29
Photographed images
The image is
blurred.
The lens is dirty. Clean the lens. 98
{ appeared when taking pictures. Check the focus on the subject and take
pictures.
27,
30,
105
| appeared when taking pictures. It may cause camera shake. Hold the
camera steadily.
28,
105
There is speckling
on the image.
The picture was taken with a slow shutter
speed (long exposure) in a high-
temperature environment.
This is a characteristic of CCDs and does
not indicate a camera fault.
Recording images
Photographed
images or movies
are not recorded.
AC power adapter was connected or
disconnected during turning the camera
on.
Connect or disconnect the AC power
adapter only when the camera is off.
Failing to turn the camera off first can
result in damage to the xD-Picture Card
or malfunctions during PC connection.
90,
101
Continued
112
Troubleshooting
Z Playing back
Z Connecting
Matters Problems Possible causes Solutions Page
Erasing
Erasing FRAME
does not erase the
frame.
Some frames may be protected. Unprotect frames using the camera on
which the protection was first applied.
58
Erasing ALL
FRAMES does
not erase all the
frames.
Frame No.
CONT. in the
frame number
setting does not
function.
You opened the battery cover without
turning the camera off when replacing the
batteries or xD-Picture Card.
Always turn the camera off when replacing
the batteries or xD-Picture Card. Opening
the battery cover without turning the
camera off may cause the frame number
memory to not function.
21
Matters Problems Possible causes Solutions Page
Connecting to TV
There is no image
on the TV.
The camera is not connected to the TV
correctly.
Connect the camera and TV correctly.
78
“TV” is selected as the TV input. Set the TV input to “VIDEO”. 78
The video output setting is incorrect. Change the setting to NTSC or PAL. 70, 72
The TV image is
black and white.
The video output setting is incorrect. Change the setting to NTSC or PAL.
70, 72
113
Troubleshooting
Z Others
Connecting to PC
PC does not
recognize the
camera.
The USB cable (mini-B) is not correctly
connected to the PC or camera.
Set up the camera, and connect the USB
cable (mini-B) correctly.
90
< PICTBRIDGE is selected in
L USB MODE in the SET-UP menu.
Perform the below steps to cancel the
setting before selecting @ DSC.
Windows
A
The “New Hardware Found” wizard or
“Scanner and Camera” wizard appears.
If the wizard does not appear, proceed
to step C.
B Click the [Cancel] button.
C Disconnect the camera from the PC.
•Macintosh
A
The window for locating the driver appears.
If the window does not appear, proceed
to step C.
B Click the [Cancel] button.
C
Disconnect the camera from the Macintosh.
90
Connecting to
printer
Cannot print with
PictBridge.
@ DSC is selected in L USB MODE
in the SET-UP menu.
Select < PICTBRIDGE.
79
Matters Problems Possible causes Solutions Page
Camera operation
etc.
Nothing happens
when pressing the
buttons on the
camera.
Camera malfunction may be caused
temporarily.
Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power
adapter and try again.
15,
16,
78,
101
The batteries have run out. Load new or fully charged batteries. 15,
17, 99
The camera no
longer works
correctly.
Camera malfunction may be caused
temporarily.
Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power adapter
and try again. If you think the camera is
faulty, contact your FUJIFILM dealer.
15,
16,
78,
101
Matters Problems Possible causes Solutions Page
114
Specifications
System
Model Digital camera FinePix A400 / FinePix A500
Effective pixels 4.1 million pixels (FinePix A400) / 5.1 million pixels (FinePix A500)
CCD 1/2.5-inch Super CCD HR
Storage media Internal memory (approx. 12 MB) / xD-Picture Card (16/32/64/128/256/512 MB/1 GB)
File format Still image: DCF-compliant
Compressed: Exif ver.2.2 JPEG, DPOF-compatible
*
Design rule for Camera File System compliant DPOF compatible
Movie: AVI format, Motion JPEG
Number of recorded pixels
(FinePix A400)
Still image: 2304 × 1728 pixels/2304 × 1536 pixels/1600 × 1200 pixels/1280 × 960 pixels/640 × 480 pixels
(4//2/1/`)
Number of recorded pixels
(FinePix A500)
Still image: 2592 × 1944 pixels/2592 × 1728 pixels/2048 × 1536 pixels/1600 × 1200 pixels/640 × 480
pixels (÷//3/2/`)
File size See the table on p.117, 118
Lens Fujinon 3× optical zoom lens
F3.3-F5.5
Focal length f=6.4 mm-19.2 mm
(Equivalent to approx. 38 mm-114 mm on a 35 mm camera)
Digital zoom (FinePix A400) Approx. 3.6× (3× optical zoom lens is used together: Max. zoom scale: approx. 10.8×)
Digital zoom (FinePix A500) Approx. 5.2× (3× optical zoom lens is used together: Max. zoom scale: approx. 15.6×)
Aperture (Wide-angle) F3.3/F8.5
Focal range Normal: approx. 60 cm (2.0 ft.) to infinity
Macro: approx. 10 cm (3.9 in.) to 80 cm (2.6 ft.)
Sensitivity AUTO/Equivalent to ISO 100/200/400
Photometry TTL 64-zones metering Multi
Exposure control Program AE
Scene position H (PORTRAIT), , (LANDSCAPE), . (SPORT), 8 (NIGHT)
115
Exposure compensation –2 EV to +2 EV in 1/3 EV-step increments (s)
Shutter speed 2 sec. to 1/1500 sec. (depend on Exposure mode)
Focus Mode: Auto focus
AF system: TTL contrast-type
AF frame selection: AF (CENTER)
White balance Automatic scene recognition/Preset (Fine, Shade, Fluorescent (Daylight), Fluorescent (Warm White),
Fluorescent (Cool White), Incandescent)
Self-timer Approx. 2 sec./10 sec.
Flash type Auto flash
Effective range: (S: AUTO): Wide-angle: approx. 60 cm-3.1 m (2.0 ft.-10.2 ft.)
Telephoto: approx. 60 cm-2 m (2.0 ft.-6.6 ft.)
Macro: approx. 30 cm-80 cm (1.0 ft.-2.6 ft.)
Flash mode
Auto, Red-eye Reduction, Forced Flash, Suppressed Flash, Slow Synchro, Red-eye Reduction + Slow Synchro
Viewfinder
Real image optical approx. 75% coverage
LCD monitor 1.8 inches, Aspect ratio: 4:3; 77,000 pixels low-temperature polysilicon TFT, Approx. 94% coverage
Movie 320 × 240 pixels/160 × 120 pixels ($/#)
(10 frames per second)
A series of continuous image can be recorded up to 60 seconds (when setting $) / 240 seconds (when
setting #). Zoom cannot be used during movie recording.
Photography functions Best framing, Frame No. memory
Playback functions Trimming, Automatic playback, Multi-frame playback
Other functions PictBridge, Exif print, Language (English, Francais, Deutsch, Español, Italiano, , ), Time
difference, Discharging rechargeable batteries
System
Continued
116
Specifications
Input/Output Terminal
VIDEO OUT (Visual output) NTSC/PAL-type
Digital input/output USB
DC input socket AC Power Adapter AC-3VX (sold separately)
Power Supply and Others
Power supply Use one of the following:
2×AA-size alkaline batteries
2×AA-size Ni-MH (Nickel-Metal Hydride) batteries (sold separately)
AC power adapter AC-3VX (sold separately)
Guide to the number of
available frames for battery
operation
According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring
digital still camera battery consumption (extract):
When using alkaline batteries, use the batteries supplied with the camera. You can use Ni-MH batteries
also. The storage media should be xD-Picture Card.
Pictures should be taken at a temperature of +23°C (+73°F), with the LCD monitor turned on, the optical
zoom moved from full wide-angle to full telephoto (or vice-versa) and back again to its original position
every 30 seconds, the flash used at full power every second shot and the camera turned off and then on
again once every 10 shots.
Note: Because the number of available shots varies depending on the capacity of alkaline batteries or
the level of charge in Ni-MH batteries, the figures shown here for the number of available shots
using batteries are not guaranteed.
The number of available shots will also decline at low temperatures.
Camera dimensions (W/H/D) 93.0 mm × 60.0 mm × 27.5 mm/3.7 in. × 2.4 in. × 1.1 in. (not including accessories and attachments)
Camera mass (weight) Approx. 126 g/4.4 oz. (not including accessories, batteries and xD-Picture Card)
Weight for photography Approx. 174 g/6.1 oz. (including batteries and xD-Picture Card)
Operating Conditions
Temperature: 0°C to +40°C (+32°F to +104°F)
80% humidity or less (no condensation)
Battery Type Number of frames
Alkaline batteries Approx. 100 frames
Ni-MH batteries 2500 mAh Approx. 400 frames
117
Z Standard number of available frames/recording time per xD-Picture Card and internal memory (FinePix A400)
The number of available frames, recording time or file size varies slightly depending on the subjects photographed. Note also
that the divergence between standard number of frames and the actual number of frames is greater for xD-Picture Cards with
higher capacities.
Quality setting 4 F 4 N „21`
$
(10 fps)
#
(10 fps)
Number of recorded
pixels
2304 × 1728 2304 × 1536 1600 × 1200 1280 × 960 640 × 480 320 × 240 160 × 120
Image data size 2.0 MB 980 KB 880 KB 630 KB 460 KB 130 KB
Internal memory
(approx. 12 MB)
5 11 13 19 25 93 71 sec. 220 sec.
16 MB 7 15 17 25 33 122 94 sec. 288 sec.
32 MB 15 31 35 50 68 247 189 sec. 9.7 min.
64 MB 32 64 72 101 137 497 6.3 min. 19.4 min.
128 MB 64 128 144 204 275 997 12.7 min. 39.0 min.
256 MB 129 257 290 409 550 1997 25.5 min. 78.1 min.
512 MB 259 515 580 818 1101 3993 51.0 min. 156.3 min.
1 GB 519 1031 1162 1639 2205 7995 102.1 min. 313.0 min.
If you shoot using the xD-Picture Cards with model numbers containing “M” such as DPC- M1GB, movie recording time may be
reduced if you repeatedly record and erase (frame erase) image files. In such a case, erase all frames or format the picture card
before use. Back up important frames (files) onto your PC or another media.
Continued
118
Specifications
Z Standard number of available frames/recording time per xD-Picture Card and internal memory (FinePix A500)
The number of available frames, recording time or file size varies slightly depending on the subjects photographed. Note also
that the divergence between standard number of frames and the actual number of frames is greater for xD-Picture Cards with
higher capacities.
*
These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this Owner’s Manual.
*
The LCD monitor on your digital camera is manufactured using advanced high-precision technology. Even so, small bright
points and anomalous colors (particularly around text) may appear on the monitor. These are normal display characteristics
and do not indicate a fault with the monitor. This phenomenon will not appear on the recorded image.
*
The operation error may be caused in a digital camera by the strong radio interference (i. e. electric fields, static electricity,
line noise, etc.).
*
Due to the nature of the lens, the edges of images may appear distorted. This is normal.
Quality setting ÷ F ÷ N „32`
$
(10 fps)
#
(10 fps)
Number of recorded
pixels
2592 × 1944 2592 × 1728 2048 × 1536 1600 × 1200 640 × 480 320 × 240 160 × 120
Image data size 2.5 MB 1.2 MB 1.1 MB 780 KB 630 KB 130 KB
Internal memory
(approx. 12 MB)
4 9 10 15 19 93 71 sec. 220 sec.
16 MB 6 12 13 19 25 122 94 sec. 288 sec.
32 MB 12 25 28 40 50 247 189 sec. 9.7 min.
64 MB 25 50 56 81 101 497 6.3 min. 19.4 min.
128 MB 51 102 113 162 204 997 12.7 min. 39.0 min.
256 MB 102 204 228 325 409 1997 25.5 min. 78.1 min.
512 MB 205 409 456 651 818 3993 51.0 min. 156.3 min.
1 GB 412 819 913 1305 1639 7995 102.1 min. 313.0 min.
119
If you shoot using the xD-Picture Cards with model numbers containing “M” such as DPC- M1GB, movie recording time may be
reduced if you repeatedly record and erase (frame erase) image files. In such a case, erase all frames or format the picture card
before use. Back up important frames (files) onto your PC or another media.
*
These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this Owner’s Manual.
*
The LCD monitor on your digital camera is manufactured using advanced high-precision technology. Even so, small bright
points and anomalous colors (particularly around text) may appear on the monitor. These are normal display characteristics
and do not indicate a fault with the monitor. This phenomenon will not appear on the recorded image.
*
The operation error may be caused in a digital camera by the strong radio interference (i. e. electric fields, static electricity,
line noise, etc.).
*
Due to the nature of the lens, the edges of images may appear distorted. This is normal.
120
Explanation of Terms
Deactivated batteries
Leaving an Ni-MH battery unused in storage for a long period may cause a rise in the level of substances that inhibit current
flow inside the battery and result in a dormant battery. A battery in this state is referred to as deactivated.
Because current flow is inhibited in a deactivated Ni-MH battery, the battery’s original level of performance cannot be achieved.
EV
A number denotes Exposure Value. The EV is determined by the brightness of the subject and sensitivity (speed) of the film
or CCD. The number is larger for bright subjects and smaller for dark subjects. As the brightness of the subject changes, a
digital camera maintains the amount of light hitting the CCD at a constant level by adjusting the aperture and shutter speed.
When the amount of light striking the CCD doubles, the EV increases by 1. Likewise, when the light is halved, the EV decreases
by 1.
Frame rate (fps)
The frame rate refers to the number of images (frames) that are photographed or played back per second. For example, when
10 frames are continuously photographed in a 1-second interval, the frame rate is expressed as 10 fps.
For reference, TV images are displayed at 30 fps (NTSC).
JPEG
Joint Photographic Experts Group
A file format used for compressing and saving color images. The higher the compression rate, the greater the loss of quality in
the decompressed (restored) image.
Memory effect
If an Ni-MH battery is repeatedly charged without first being fully discharged, its performance may drop below its original level.
This is referred to as the “memory effect”.
Motion JPEG
A type of AVI (Audio Video Interleave) file format that handles images and sound as a single file. Images in the file are recorded
in JPEG format. Motion JPEG can be played back by QuickTime 3.0 or later.
Smear
A phenomenon specific to CCDs whereby white streaks appear on the image when there is a very strong light source, such as
the sun or reflected sunlight, in the photography screen.
White Balance
Whatever the kind of the light, the human eye adapts to it so that a white object still looks white. On the other hand, devices
such as digital cameras see a white subject as white by first adjusting the color balance to suit the color of the ambient light
around the subject. This adjustment is called matching the white balance.
Exif Print Format is a newly revised digital camera file format that contains a variety of shooting information for optimal printing.
121
FUJIFILM Digital Camera Worldwide Network
If you have technical questions or if you need repair service, ask the following local distributor.
Please present the warranty card and your purchase receipt when you ask for repairs. Refer to the warranty card for conditions of the warranty.
There is a case that repair and Technical support cannot be accepted for some models which your local distributor does not deal with.
These lists are subject to change without notice.
NORTH AMERICA
Canada
Fuji Photo Film Canada Inc.
Technical support
600 Suffolk Court Mississauga Ontario, L5R 4G4
TEL 1-866-818-FUJI (3854) http://www.fujihelp.ca
Repair service 600 Suffolk Court Mississauga Ontario, L5R 4G4
TEL 1-800-263-5018 FAX 1-905-755-2993 http://www.fujihelp.ca
U.S.A.
Fuji Photo Film USA
Technical support
1100 King George Post Rd., Edison, NJ 08837
TEL 800-800-3854 FAX 732-857-3487 digitalinfo@fujifilm.com
Repair service 1100 King George Post Rd., Edison, NJ 08837
TEL 732-857-3000 FAX 732-857-3471 njcamerarepair@fujifilm.com
Hawaii
Fuji Photo Film Hawaii, Inc.
Technical support &
Repair service
94-468 Akoki Street, Waipahu, HI. 96797
TEL 1-808-677-3854, ext. 209 FAX 1-808-677-1443
kurt_kmett@fujifilmhawaii.com
CENTRAL & SOUTH AMERICA
Argentina
Imagen e informacion S.A.
Technical support &
Repair service
Fondo de la Legua 936 San Isidro Pcia. de Buenos Aires
TEL +54-11-4836-1000 FAX +54-11-4836-1144
servtec@imageneinformacion.com.ar
Bolivia
Reifschneider Bolivia Ltda.
Technical support &
Repair service
Calle H N.° 5 - Equipetrol Norte - Santa Cruz
TEL +591 33 44 1129 FAX +591 33 45 2919 gciagral@bibosi.scz.entelnet.bo
Brazil
Fuji Photo Film do Brasil Ltda.
Technical support &
Repair service
Av. Vereador José Diniz, 3400 - Campo Belo, Sào Paulo/SP
TEL 0800-12-8600 FAX +55 11 5091-4150 camarasdigitais@fujifilm.com.br
Chile
Reifschneider SA
Technical support &
Repair service
Av. El Conquistador del Monte 5024, Huechuraba, Santiago, Chile
TEL 02-4431500 FAX 02-4431596 ceciliacalvo@reifschneider.cl
Colombia
Animex de Colombia Ltda.
Technical support &
Repair service
Calle 44 N.° 13-43 Piso 2 Apartado 18001 - Bogotá
TEL +57 1 338-0299 FAX +57 1 288-2208 animex@etb.net.co
Ecuador
Espacri Cia Ltda
Technical support &
Repair service
Bolivar 5-69 y Hermano Miguel
TEL 593-72-835526 FAX 593-72-833157
Continued
122
FUJIFILM Digital Camera Worldwide Network
Ecuador
Importaciones Espacri Cia. Ltda.
Technical support &
Repair service
Simón Bolivar 5-69 y Hno. Miguel - Cuenca
TEL +593 783 5526 FAX +593 783 3157 portiz@fujifilm.com.ec
Mexico
Fujifilm de Mexico, S.A. de C.V.
Technical support
Av. Ejercito Nacional 351, Col. Granada 11520 Mexico, D.F.
TEL (52-55) 5263-5566 / 68 FAX (52-55) 5254-1508 jlgiraud1@fujifilm.com.mx
Repair service Av. Presidente Juarez 2007, Col. Tepetlacalco, 54090 Tlalnepantla, Edo. de
Mexico
TEL (52-55) 5263-5500 FAX (52-55) 5254-1508 jlgiraud1@fujifilm.com.mx
Paraguay
Errece S.R.L.
Technical support &
Repair service
Edificio Unitas 15 de Agosto 1035, Asunción
TEL +595 21 444256 FAX +595 21 444651 jmarbulo@fujifilm.com.py
Peru
Procesos de Color S.A.
Technical support &
Repair service
Pablo Bermudez 111 Apartado 3794 - Esq. Arequipa - Lima 11
TEL +51 14 33 5563 FAX +51 14 33 7177 jalvarado@fujifilm.com.pe
Uruguay
Fotocamara S.R.L.
Technical support &
Repair service
Cuareim 1439, montevideo, Uruguay
TEL +598-2-9002004 FAX +598-2-9008430 fotocam@adinet.com.uy
Uruguay
Kiel S.A.
Technical support &
Repair service
Maldonado 1787 Montevideo- Uruguay
TEL (05982) 419 4542 FAX (05982) 412 0046 kiel@fujifilm.com.uy
Venezuela
C. Hellmund & Cia Sa
Technical support &
Repair service
Av. Ppal Diego Cisneros Caracas Venezuela Edf Oficentro
TEL 0212-2022300 FAX 0212-2399796 hellmund@hellmund.com
EUROPE
Austria
Fuji Film Oesterreich
Technical support &
Repair service
Traviatagasse/Pfarrgasse, 1230 Vienna, Austria
TEL 0043 1 6162606/51 or 52 FAX 0043 1 6162606/58
kamera.service@fujifilm.at
Belgium
Belgian Fuji Agency
Technical support &
Repair service
20, Avenue Lavoisier, Wavre, 1300, Belgium
TEL 3210242090 FAX 3210238562 info@fuji.be
Croatia
I&I d.o.o.
Technical support
Hondlova 2, Zagreb, Croatia
TEL 38512319060 FAX 2310240 dsaravanja@fujifilm.hr
Repair service Hondlova 2, Zagreb, Croatia
TEL 38512316228 FAX 2310240 info@fujifilm.hr
123
Cyprus
PMS IMAGING LTD
Technical support &
Repair service
11, Dighenis Akritas Avenue, P.O.BOX 22315, 1586 Nicosia
TEL 35722746746 FAX 35722438209 mariosashiotis@fujifilm.com.cy
Cyprus
Doros Neophytou
CAMERA REPAIRS
Technical support &
Repair service
28B, Agiou Demetriou, Acropoli, Nicosia
TEL 35722314719 FAX 35722515562 dorosn@logosnet.cy.net
Czech Republic
Fujifilm Cz., s.r.o.
Technical support
U nakladoveho nadrazi 2/1949, 130 00 Praha 3
TEL 00420 234 703 411 FAX 00420 234 703 489 fricman@fujifilm.cz
Czech Republic
AWH servis
Repair service
Milesovska 1, 130 00 Praha 3, Czech republic
TEL 00420 222 721 525 FAX 00420 222 720 122 awh@awh.cz
Denmark
Fujifilm Denmark A/S
Technical support &
Repair service
Stubbeled 2, 2950 Vedbæk Denmark
TEL 0045 45662244 FAX 0045 45662214 fujifilm@fujifilm.dk
Finland
Fuji Finland Oy
Technical support &
Repair service
Martinkyläntie 41, 01720 Vantaa, Finland
TEL +358 9 825951 FAX +358 9 870 3818 fuji@fuji.fi
France
FUJIFILM France
Technical support &
Repair service
2, Avenue Franklin, 78186 Saint-Quentin en Yvelines, France
FAX 33 1 01 30 58 58 65 direction.technique@fujifilm.fr
Germany
Fuji Photo Film (Europe) GmbH
Technical support &
Repair service
Heesenstr. 70, 40549 Düsseldorf
International call TEL +49 211 50890 FAX +49 211 5089668 service@fujifilm.de
National call* TEL 0180 5898980 FAX 0180 5898982
*12 Cent/Min aus dem deutschen Festnetz
Greece
FUJIFILM HELLAS S.A.
Technical support &
Repair service
1, Ihous & Ag. Anargiron str., 175 64 P.Phaliro, Athens, Greece
TEL 0030 210 9404100 FAX 0030 210 9404397 fujifilm@fujifilm.gr
Hungary
Fujifilm Hungary Ltd.
Technical support
Vaci ut 19. Budapest, 1134, Hungary
TEL 3612389410 FAX 3612389401 fujifilm@fujifilm.hu
Iceland
Icephoto (Ljosmyndavorur)
Technical support &
Repair service
Skipholt 31, 105 Reykjavik, Iceland
TEL 354 568 0450 FAX 354 568 0455 framkollun@fujifilm.is
Italy
FujiFilm Italia S.p.A.
Technical support
Via Dell’Unione Europea, 4 - 20097 San Donato Milanese (MI), Italy
TEL 039-02895821 FAX 039-0289582912 info@fujifilm.it
Repair service Fujifilm On Line - Call center
TEL 039-026695272 info@fujifilm.it
Continued
124
FUJIFILM Digital Camera Worldwide Network
Lithuania
Fujifilm Lithuania
Technical support &
Repair service
Gerosios Vilties str. 38, LT-03143 Vilnius, Lithuania
TEL 370-5-2130121 FAX 3705-5-2134066 info@fujifilm.lt
Malta
Ciancio (1913) Co.Ltd.
Technical support &
Repair service
Fuji Tech Centre, Ciancio House, Cannon Road, Qormi, QRM05
TEL 0356-21-480500 FAX 0356-21-488328 info@fujifilm.com.mt
Netherlands
Fujifilm Nederland BV
Technical support
Hoogstraat 39, 3011 PE, Rotterdam, The Netherlands
TEL 010-2812345 FAX 010-2812334 fuji@fujifilm.nl
Repair service Hoevenseweg 43, 4877 LA, Etten-Leur, The Netherlands
TEL 010-2812345 FAX 076-7502641 reparatie@fujifilm.nl
Norway
Fujifilm Norge AS
Technical support
Lilleakerveien 10, 0283 Oslo, Norway
TEL 0047-22736000 FAX 0047-22736020 http://www.fujifilm.no/
mailto:post@fujifilm.no
Repair service Liaveien 1, 5132 Nyborg, Norway
TEL 0047-55393880 FAX 0047-55195201 http://www.camera.no/
mailto:service@camera.no
Poland
Fujifilm Polska Distribution Sp. z
o.o.
Technical support
Poland Al..Jerozolimskie 178; 02-486 Warszawa
TEL +48-22-517-66-00 FAX +48-22-517-66-02 fujifilm@fujifilm.pl
Repair service Poland, Muszkieterow 15, 02-273 Warszawa
TEL +48-22-886-94-40 FAX +48-22-886-94-42 serwis@fujifilm.pl
Portugal
Fujifilm Portugal, Lda
Technical support
Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal
TEL (351) 226194200 FAX (351) 226194213 finepix@fujifilm.pt
Repair service Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal
TEL (351) 226194200 FAX (351) 225194662 cameras@fujifilm.pt
Romania
CTS-Cardinal Top Systems Ltd
Technical support &
Repair service
112, Calea Dorobanti street, 4 flat, 1sector, Bucharest, Romania
TEL 4021-230-09-82 FAX 4021-230-09-82 cts_tirla@hotmail.com
Russia
ZAO “Fujifilm RU”
Technical support
Bld. 1, 10, Rozanova str., Moscow, 123007, Russia
TEL +7-095-956-9858 FAX +7-095-230-6217 info@fujifilm.ru
Repair service 18, Shelepikhinskaya Naberezhnaya str., Moscow, 123290, Russia
TEL +7-095-797-3434 FAX +7-095-797-3434
Slovakia
Fujifilm Slovakia
Technical support
Pribylinska 2, 831 04 Bratislava, Slovakia
TEL 00421 2 44 888 077 FAX 00421 2 44 889 300 fujifilm@fujifilm.sk
Repair service FIS Tatracentrum, Hodzovo nam. 4 - Tatracentrum, 811 06 Bratislava, Slovakia
TEL 00421 2 54 647 347 fis.tatracentrum@stonline.sk
125
Spain
Fujifilm España S.A.
Technical support
Aragón 180, 08011 Barcelona (España)
TEL 902012535 FAX 934515900 / 933230330 info@fujifilm.es
Repair service Aragón 180, 08011 Barcelona (España)
TEL 934511515 FAX 934515900 / 933230330 tallersat@fujifilm.es
Sweden
Fujifilm Sverige AB
Technical support
Sveavägen 167 104 35 Stockholm
TEL 46 8 506 141 70 FAX 46 8 506 142 09 kamera@fujifilm.se
Repair service Sveavägen 167 104 35 Stockholm
TEL 46 8 506 513 54 FAX 46 8 506513 54 kameraverkstaden@fujifilm.se
Switzerland /
Lichtenstein
Fujifilm (Switzerland) AG
Technical support &
Repair service
Niederhaslistrasse 12, 8157 Dietlikon, Switzerland
TEL +41 44 855 5154 FAX +41 44 855 5329 RepairCenter@fujifilm.ch
Turkey
Fujifilm Turkiye Sinfo A.S.
Technical support
Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
TEL +90 212 696 5090 FAX +90 212 696 5009 csarp@fujifilm.com.tr
Repair service Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
TEL +90 212 696 5090 FAX +90 212 696 5010 servis@fujifilm.com.tr
U.K.
Fuji Photo Film (UK) Ltd.
Technical support
St Martins Way St Martins Business Centre Bedford MK42 0LF
TEL +44 (0)123 424 5383 FAX +44 (0)123 424 5285 fujitec@fuji.co.uk
Repair service St Martins Way St Martins Business Centre Bedford MK42 0LF
TEL +44 (0)123 421 8388 FAX +44 (0)123 424 5285 fujitec@fuji.co.uk
Ukraine
Image Ukraine CJSC
Technical support &
Repair service
12, Kontraktova ploshcha, Kyiv 04070, Ukraine
TEL +380-44-4909075 FAX +380-44-4909076 d@fujifilm.ua
MIDDLE EAST
Iran
Tehran Fuka Co.
Technical support &
Repair service
229,“Fuji” Bldg., Mirdamad Blvd., Tehran 19189, Iran
TEL (+98-21)2254810-19 FAX (+98-21)2221002 fuka@neda.net
Israel
Shimone Group Ltd.
Technical support
Efal 33 keyriat Arie Petah Tikva 49130, Israel
TEL (+ ) 972 3 9250666 digital@fujifilm.co.il
Repair service Efal 33 keyriat Arie Petah Tikva 49130, Israel
TEL (+ ) 972 3 9250666 FAX 972 3 9250699 khaim@shimone.com
Jordan
Grand Stores
Technical support &
Repair service
Al- Abdali, Amman / Jordan
TEL 009626-4646387 FAX 009626-4647542 gstores@go.com.jo
Qatar
Techno Blue
Technical support
Blue Salon Bldg, 3rd Floor, Suhaim bin Hamad st, Al- Saad, Doha
TEL 00974 44 66 175 FAX 00974 44 79 053 prabu@techno-blue.com
Continued
126
FUJIFILM Digital Camera Worldwide Network
Saudi Arabia
Emam Distribution Co. Ltd.
Technical support
P.O. Box 1716, Jeddah 21441, Saudi Arabia
TEL 96626978756 FAX 96626917036 service@fujifilm.com.sa
Syria
Film Trading Company
Technical support
Al-Shahbandar P.O. Box:31180 Damascus SYRIA
TEL + 963 11 2218049 FAX + 963 11 44673456 f.t.c@Net.SY
Repair service Al-cheikh Taha P.O. Box: 6171 Aleppo SYRIA
TEL + 963 21 4641903 FAX + 963 21 4641907 filmtradin@Net.SY
U.A.E.
Grand Stores
Technical support &
Repair service
P. O. Box 2144, Saleh Bin Lahej Building, Al Garhoud, Deira, Dubai
TEL + 971-4-2823700 FAX + 971-4-2828382 photography@grandstores.ae
Yemen
Al-Haidary Trading
Technical support
P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503980 FAX 00967-1-503983
Repair service P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503977 FAX 00967-1-503983
AFRICA
Egypt
Foto Express Egypt
Technical support &
Repair service
426 Pyramids St., Giza, Egypt
TEL (202) 7762062 FAX (202) 7760169 fotoegypt@access.com.eg
Kenya
Fuji Kenya Ltd
Repair service
P.O.Box 41669-00100, Fuji Plaza, Chiromo Road, Nairobi, Kenya.
TEL (254-20)4446265-8 FAX (254-20)4448515 / 7 info@fujifilm.co.ke
OCEANIA
Australia
FUJIFILM Australia Pty Ltd
Technical support
114 Old Pittwater Road, Brookvale, NSW, 2100, Australia
TEL 1800 226 355 FAX +61 (2) 9938 1975 digital@fujifilm.com.au
Repair service 114 Joynton Avenue, Zetland, NSW, 2017, Australia
TEL 1800 226 355 FAX +61 (2) 9938 1975 digital@fujifilm.com.au
Fiji
Brijlal & Co. Ltd
Technical support &
Repair service
70-72 Cumming Street,Suva,Fiji
TEL (679)3304133 FAX (679)3302777 kapadia@connect.com.fj
New Caledonia
Phocidis SARL
Technical support &
Repair service
58, rue Higginson - B.P.661 - 98845
TEL (00 687) 25-46-35 FAX (00 687) 28-66-70 phocidis@phocidis.nc
New Zealand
Fujifilm NZ Ltd
Technical support &
Repair service
Cnr William Pickering & Bush Road Albany, Auckland
TEL +64-9-4140400 FAX +64-9-4140410 glenn.beaumont@fujifilm.co.nz
Papua New Guinea
Oceania PNG Limited
Technical support
Section 15, Allotment 1, Reke St, Boroko NCD. PNG. Mail: PO Box 2167, Boroko
NCD. PNG. TEL +675 3256411 FAX +675 3250311 oceania@daltron.com.pg
127
ASIA
Hong Kong
Fuji Photo Products Co., Ltd.
Technical support &
Repair service
8/F.,TSUEN WAN IND. CENTRE, 220 TEXACO RD., TSUEN WAN, HONG KONG
TEL (852)2406 3287 FAX (852)2408 3130 rsd@chinahkphoto.com.hk
Indonesia
PT Modern Photo Tbk
Technical support &
Repair service
Jl.Matraman Raya 12, Jakarta Timur 13150
TEL +62 021 2801000 FAX +62 021 8581620+62 021 2801012
kmr-srv@moderngroup.co.id
Malaysia
Fuji Photo Film (Malaysia)
Sdn. Bhd.
Technical support
Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling
Jaya, Selangor Darul Ehsan, Malaysia
TEL 603-79584700 FAX 603-79584110 digital@fujifilm.com.my
Repair service Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling
Jaya, Selangor Darul Ehsan, Malaysia
TEL 603-79584700 FAX 603-79584110 technical@fujifilm.com.my
Philippines
YKL Development & Trdg. Corp.
Technical support
24 Sto. Domingo St., Quezon City 1100, Philippines
TEL 632-7436601~06 FAX 632-7324661 digital@yklcolor.com
Repair service 24 Sto. Domingo St., Quezon City 1100, Philippines
TEL 632-7436601~06 FAX 632-7324661 tech_services@yklcolor.com
Singapore
Fuji Photo Film Singapore Pte Ltd
Technical support &
Repair service
10 New Industrial Road Fujifilm Building Singapore 536201
TEL 65-6380 5557 FAX 65-6281 3594 service@fujifilm.com.sg
South Korea
Korea Fujifilm Co., Ltd.
Technical support
30-1, Mukjeung-dong, Jung-gu, Seoul, Korea
TEL +82-2-3282-7363 FAX +82-2-2269-7435 photo@fujifilm.co.kr
South Korea
Yonsan AS Center (Fujidigital)
Repair service
#301, 3F, Jeonjaland, 16-9, Hangangro3-ga, Yongsan-gu, Seoul, Korea
TEL +82-2-701-1472 FAX +82-2-718-1331 1bowl@hanmail.net
South Korea
Kangnam AS Center
(Digitalgallery)
Repair service
2F, Hyeongin Tower, 23-2, Bangyi-dong, Songpa-gu, Seoul, Korea
TEL +82-2-2203-1472 FAX +82-2-418-5572 nurijili@hanmail.net
South Korea
Busan AS Center (Digital-Sewon)
Repair service
241-4, Bujeon-dong, Busanjin-gu, Busan, Korea
TEL +82-51-806-1472 FAX +82-51-817-0083 merahan@yahoo.co.kr
Taiwan
Hung Chong Corp.
Technical support &
Repair service
No. 38, Min-Chuan E. Rd. Sec. 6, Taipei (114), Taiwan, R.O.C.
TEL 886-2-6602-8988 FAX 886-2-2791-8647 dah@mail.hungchong.com.tw
Thailand
Fuji Photo Film (Thailand) Ltd.
Technical support
388 SP Building, 8th Floor, Phayathai, Bangkok 10400
TEL +662-2730029 ext. 755 FAX +662-2730239 supaleark@fujifilm.co.th
Repair service 388 SP Building, 8th Floor, Phayathai, Bangkok 10400
TEL +662-2730029 ext.761,762 FAX +662-2730239 warin@fujifilm.co.th
128
Safety Notes
Make sure that you use your FinePix A400 / FinePix
A500 camera correctly. Read these Safety Notes and
your Owner’s Manual carefully before use.
After reading these Safety Notes, store them in a safe
place.
The icons shown below are used in this document to
indicate the severity of the injury or damage that can
result if the information indicated by the icon is ignored
and the product is used incorrectly as a result.
The icons shown below are used to indicate the nature of
the information which is to be observed.
About the Icons
WARNING
This icon indicates that death
or serious injury can result if
the information is ignored.
CAUTION
This icon indicates that
personal injury or material
damage can result if the
information is ignored.
Triangular icons tell you that this information requires
attention (“important”).
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark tell you an
action that must be performed (“Required”).
WARNING
If a problem arises, turn the camera off,
remove the batteries, disconnect and
unplug the AC power adapter.
Continued use of the camera when it is
emitting smoke, is emitting any unusual
odor, or is in any other abnormal state can
cause a fire or electric shock.
Contact your FUJIFILM dealer.
Do not allow water or foreign objects to
enter the camera.
If water or foreign objects get inside the
camera, turn the camera off, remove the
batteries and disconnect and unplug the
AC power adapter.
Continued use of the camera can cause a
fire or electric shock.
Contact your FUJIFILM dealer.
Do not use the camera in the bathroom
or shower.
This can cause a fire or electric shock.
Never attempt to change or take apart
the camera. (Never open the casing.)
Do not use the camera when it has been
dropped or the casing is damaged.
This can cause a fire or electric shock.
Contact your FUJIFILM dealer.
Unplug from
power socket.
Do not use in the
bathroom or
shower.
Do not
disassemble.
129
Do not change, heat or unduly twist or
pull the connection cord and do not
place heavy objects on the connection
cord.
These actions could damage the cord and
cause a fire or electric shock.
If the cord is damaged, contact your
FUJIFILM dealer.
Do not place the camera on an unstable
surface.
This can cause the camera to fall or tip
over and cause injury.
Never attempt to take pictures while in
motion.
Do not use the camera while you are
walking or driving a vehicle.
This can result in you falling down or being
involved in a traffic accident.
Do not touch any metal parts of the
camera during a thunderstorm.
This can cause an electric shock due to
induced current from the lightning
discharge.
Do not use the batteries except as
specified.
Load the batteries with the + and ,
marks.
WARNING
Do not heat, change or take apart the
batteries.
Do not drop or subject the batteries to
impacts.
Do not attempt to recharge lithium or
alkaline batteries.
Do not store the batteries with metallic
products.
Do not use chargers other than the
specified model to charge the batteries.
Any of these actions can cause the
batteries to burst or leak and cause fire or
injury as a result.
Use only the batteries or AC power
adapters specified for use with this
camera.
Do not use voltages other than the
power supply voltage shown.
The use of other power sources can cause
a fire.
If the battery leaks and fluid gets in
contact with your eyes, skin or
clothing. Flush the affected area with
clean water and seek medical attention
or call an emergency number right
away.
Do not use the charger to charge
batteries other than those specified
here.
The charger is designed for Fujifilm HR-AA
Ni-MH batteries. Using the charger to
charge conventional batteries or other
types of rechargeable batteries can cause
the battery to leak fluid, overheat or burst.
WARNING
130
Safety Notes
When discarding or storing batteries,
cover the battery terminals with
insulation tape.
Contact with other metallic objects or
batteries could cause the batteries to ignite
or burst.
Keep xD-Picture Cards out of the reach
of small children.
Because xD-Picture Cards are small,
they can be swallowed by children. Be
sure to store xD-Picture Cards out of the
reach of small children. If a child swallows
an xD-Picture Card, seek medical
attention or call an emergency number.
WARNING CAUTION
Do not use this camera in locations
affected by oil fumes, steam, humidity
or dust.
This can cause a fire or electric shock.
Do not leave this camera in places
subject to extremely high
temperatures.
Do not leave the camera in locations such
as a sealed vehicle or in direct sunlight.
This can cause a fire.
Keep out of the reach of small children.
This product could cause injury in the
hands of a child.
Do not place heavy objects on the
camera.
This can cause the heavy object to tip over
or fall and cause injury.
Do not move the camera while the AC
power adapter is still connected.
Do not pull on the connection cord to
disconnect the AC power adapter.
This can damage the power cord or cables
and cause a fire or electric shock.
Do not use the AC power adapter when
the plug is damaged or the plug socket
connection is loose.
This could cause a fire or electric shock.
Do not cover or wrap the camera or the
AC power adapter in a cloth or blanket.
This can cause heat to build up and distort
the casing or cause a fire.
131
When you are cleaning the camera or
you do not plan to use the camera for
an extended period, remove the
batteries and disconnect and unplug
the AC power adapter.
Failure to do so can cause a fire or electric
shock.
When charging ends, unplug the
charger from the power socket.
Leaving the charger plugged into the
power socket can cause a fire.
Using a flash too close to a person’s
eyes may temporarily affect the
eyesight.
Take particular care when photographing
infants and young children.
When an xD-Picture Card is removed,
the card could come out of the slot too
quickly. Use your finger to hold it and
gently release the card.
Request regular internal testing and
cleaning for your camera.
Build-up of dust in your camera can cause
a fire or electric shock.
Contact your FUJIFILM dealer to
request internal cleaning every 2 years.
Please note this is not a free of charge
service.
CAUTION
26
-
30, Nishiazabu 2
-
chome, Minato
-
ku, Tokyo 106
-
8620, Japan
http://home.fujifilm.com/products/digital/
Printed in China
FPT/Y-507112-PW
125

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fuji Finepix A500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fuji Finepix A500 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info