798524
16
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
16
Timer function
To select the timer function, press the "MODE" button until the timer LED lights up. You can now use the rotary knob
to set the desired cooking time, ranging from 1 minute to a maximum of 3 hours. The timer is activated as soon as you
do not touch any button for a few seconds. When the timer runs out, you will hear a short beep and the appliance will
go back into standby mode. You can also see this by the flashing "----" on the display. It is perfectly normal for the fan
to continue working in standby mode.
If the setting is not changed for 3 seconds after the LED display has blinked, the last setting chosen is always applied.
The display will alternately show the selected temperature and remaining cooking time or the selected power level
and remaining cooking time.
If you do not wish to use a timer, the appliance will automatically switch to standby mode after 2 hours.
If you wish to stop the cooking process earlier without using a timer, you can simply switch the appliance off using the
ON/OFF key.
5. MAINTENANCE AND CLEANING
First switch off the appliance and remove the plug from the socket.
You can clean the cooking plate with a soft, damp cloth or sponge. If the cooking plate is very dirty, you can use a
special cleaner for ceramic cooking plates.
The rest of the appliance can be cleaned with a soft, damp cloth. The appliance should NEVER be immersed in water.
Always alllow to dry completely.
Remove any dust in the air inlet and outlet with a cotton swab.
6. PRACTICAL TIPS IN CASE OF MALFUNCTIONS
Possible error messages
Error message Advice
A sound signal and the MODE
button does not react.
There is no pot on the cooking
plate.
Place a suitable cooking pot in the centre of the cooking zone.
E01
Indicates a short circuit.
Unplug the power cord, wait a few minutes and try again. If the error persists,
contact your sales point or recognized repairer.
E02
The temperature sensor under
the glass is overheated or
malfunctioning.
Remove the plug from the socket and allow the cooking plate to cool down. If the
appliance cannot be switched on again, contact your sales point or recognized
repairer.
E03
The mains voltage is lower or
higher than that displayed on
the unit.
Check whether your appliance is suitable for the mains.
If there is still a malfunction, do not use the appliance. Please address to your sales point. Also when the power cord is
damaged, address to your sales point or recognized repairer.
THE APPLIANCE HAS BEEN DESIGNED FOR DOMESTIC USE. THE WARRANTY CONDITIONS EXPIRE UPON
PROFESSIONAL USE. DEFECTS AND/OF DAMAGES FOLLOWING TO THE NON OBSERVANCE OF THE
USER MANUAL ARE NOT COVERED BY THE WARRANTY.
We are entitled to make technical modifications at all times.
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fritel IP 1266 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fritel IP 1266 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1.52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info