You can use a password to keep the information in the
Phone List private. The password is requested when
the unit is turned on and the Phone List is accessed.
Password Warnings
Warning! After you set the password, you must enter the
password to access the phone list for the first time during a
session. Always record your password and keep it in a sep-
arate place. If you forget the password, you must reset the
unit to access the phone list. Warning! Resetting the unit
erases all user-entered information. Always keep written
copies of your data. If you do not have a reset button locat-
ed on the back of your unit, remove the batteries, wait at
least two minutes, and then re-install them. For battery
instructions, see Installing the Battery on page 4. If you
have a reset button, use the end of a straightened paper-
clip to gently press the reset button. If the unit does not
reset after pressing the reset button, follow the above
instructions for removing the batteries.
Password Setup
1. Press .
2. Use to see Set Password and press ENTER.
3. Type a password and then press ENTER.
Your password can have up to 8 characters.
You are prompted to retype your password, and
press ENTER to confirm.
4. To test the password, press twice, type the
password, and press ENTER.
5. To disable the password, repeat Steps 1 and 2
above, and press ENTER when Password displays.
12
Using a Password
