669064
33
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
Frama Matrix F12
33
5.6. Printer Settings
Information
1. Do not frank mail items thicker than 10 mm. You risk allowing the printing head to touch the
surface of the mail item and thus smearing the franked mark. You should therefore always use
Frama Matrix F12 franking labels for thick letters and packets.
2. Please make sure that no sharp objects, such as paper clips, are near the franking zone. This can
damage the print head.
3. Do not use very absorbent or fibrous envelopes which could prevent a cleanly printed mark. This
could invalidate your franking.
4. The use of coloured envelopes which offer insufficient contrast with the franking mark is not
permitted.
5. After a certain time the printing head is sealed to prevent the individual nozzles from drying. Do
not, therefore, switch the franking system off immediately, but wait until the print head is
sealed, or use the Log off button.
6. Please run a print head test and clean the print head using the Nozzle Cleaning function should
you have the impression that there are lines missing from the franked mark.
7. Always use the functions from the Printer Settings menu. Replacing the print head without
adjusting the alignment and testing from the Printer Settings menu can lead to inadequate
quality of the franking mark.
The Printer Settings menu gives you access to the options and functions required for perfect printing. The
functions in the Printer Settings menu are described in sequence below.
5.6.1. Nozzle test
A franking mark test is incorporated in your Frama Matrix F12
franking system.
This test activates each individual nozzle in the printing head.
This enables you to easily locate defective nozzles, and also to
determine the scope of the cleaning programme.
Press the Nozzle Test key and insert an envelope or
similar into the system.
A test franking mark is made. Check whether all
lines have printed. Run nozzle cleaning if necessary.
5.6.2. Nozzle cleaning
Whi
te lines in the print mark or lines missing from the nozzle test print mean that the print head must be
cleaned to restore the print quality.
Information
Blocked nozzles are often the result of the electric supply being disconnected before the nozzles
could be properly sealed. Always use the system shut-down function to switch off your franking
system reliably.
Two cleaning programmes are available to you for cleaning the nozzles:
Nozzle cleaning: A no
rmal print head cleaning operation is run. The print head and the nozzles are
cleaned.
Nozz
le cleaning +: Intensive flushing and cleaning of the nozzles and the print head.
Press the appropriate key to call up the programme you need. The cleaning programme starts automati-
cally. It is advisable to run the Nozzle Test function afterwards to check how satisfactory the cleaning op-
eration was.
33

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Frama-MATRIX-F12

Zoeken resetten

  • Mijn frankeermachine ( Frama Matrix F12 ) stopt er steeds mee en dan komt er in het scherm te staan Error E0015. Wat kan ik hier aan doen? Gesteld op 22-10-2020 om 16:15

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Frama MATRIX F12 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Frama MATRIX F12 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Frama MATRIX F12

Frama MATRIX F12 Gebruiksaanwijzing - Nederlands - 60 pagina's

Frama MATRIX F12 Gebruiksaanwijzing - Deutsch - 58 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info