548566
21
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
IPCAM User Manual
- 19 -
Figure 3.4
Access the IP Camera from the Internet
User can access the IP Camera from the Internet,Enter WAN IP address + port number in the IE to
access IP Camera.For example, Http:// 116.25.51.115:85
Note: Make sure the Port mapping is success.You can do port mapping by two ways:
Enter setting page of the router which ipcamera connect with to enable UPNP function.Enter
ipcamera Upnp Settings to enable UPNP and make sure the state is Upnp success.
If your router has the Virtual Map function.Enter router setting page,add ipcameras IP and
port to the Virtual map list.
3.6 How to use DDNS
When use ADSL, the IP Camera will connect to the Internet through ADSL automatically. For each
ADSL reconnection,ISP will re-assign a new IP address for the IP Camera to facilitate the access.
DDNS(Dynamic Domain Name Server) can map the dynamic IP address of an IP Camera to a fixed
domain name.Therefore,we can access the IP Camera by the fixed domain name whether the IP
address changes or not. The IP address is not necessary when you using the DDNS via the domain
name to find your network.
1) Go to the website which Provides free domain name,register and apply a free domain name. such
as http://www.dyndns.com/(details:4.1.6 ).
2) login the Camera homepage as Administration and enter”DDNS Service Settingspage input the
name, password and Host(details: 2.5.3) .Then click <SUBMIT> and reboot Device.
3) Re-login the Camera homepage and enter”DDNS Service Settingspage to check the DDNS
Status is DynDns Succeed or not.
4) Enter”UPnP Settingspage,the UPnP Status should be UPnP Succeed.If the status is not
Succeed,you may enter Basic Network Settings page to change Http Port (details: 2.5.2). Then
click <SUBMIT> and reboot Device.
5) Re-login the Camera homepage to check and make sure the DDNS Status and UPnP Status is
Succeed.
6) You only need to enter the domain name(domain name+Port number http://ipcam.kicks-ass.net:81/)
in the IE address bar ,the browser will visit the IP Camera.
Wait for several minutes and the IP Camera will dial up to access the Internet automatically, and the
communication with the DDNS server is established successfully. In the way, the user can access the
IP Camera from a WAN by using the DDNS domain name.
If the gateway settings and DDNS settings have been completed,ener the DDNS dynamic domain
name(for example,http://ipcam.vicp.net/,do not add www.) in the address bar of the IE to access the IP
Camera.If multiple IP Cameras are connected to the same router,enter DDNS dynamic domain + port
number(for example, http://ipcam.vicp.net:85/) in the address bar of the IE to access different IP
Cameras.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Foscam FI8909 NA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Foscam FI8909 NA in de taal/talen: Frans als bijlage per email.

De handleiding is 1,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Foscam FI8909 NA

Foscam FI8909 NA Snelstart handleiding - Nederlands - 15 pagina's

Foscam FI8909 NA Gebruiksaanwijzing - English - 30 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info