Grassbox Instructions
Grassbox Full (K)
1. As the grassbox fills up, grass will be clearly visible
through the window in the lid (K).
2. When the window is full it is time to empty the grassbox.
Emptying the Grass
• Stop the lawnmower, and wait until the blade has
stopped rotating BEFORE lifting the grassbox lid.
1. Lift grassbox lid. (L)
2. Lift out grassbox and empty. (M)
3. Replace grassbox and close lid carefully.
• Failure to fit the grassbox and grassbox lid correctly will
cause poor grass collection. Ensure there is no grass
trapped between the lid and the hood.
K
grassbox
is full
grassbox
is empty
M
Lift out box
N1 N2
N3
N4
Storing your cable in the Easi-Reel cable winder
1. Insert the female connector into the centre of the cable
winder (N1)
2. Place the cable under the cable guide (N2)
3. Turn the cable winder (N3) until all of the cable is
wound in.(N4)
Unwinding the cable before re-use
1. Pull the cable by the plug and unwind the cable fully.
• Ensure that the cable is released from the cable
guide (N2) before using your machine.
• Ensure cable is not entangled with any other ca-
bles and that it is not trapped in any parts of the
product.
Easi-Reel Cable Winder
L
Spanner & Spacers
There is a spanner and additional spacers, for height
adjustment, stored inside the lawnmower underneath
the grassbox.(P) These can be stored inside the
lawnmower even whilst it is use.
P
Adjusting the Cutting Height
Always handle the blade with care - sharp edges
could cause injury. USE GLOVES. Never use more
than 3 Cutting Height Spacers. Spacers must only be
fitted between the blade and the fan and NEVER be-
tween the blade and the bolt.
1. Remove the blade bolt, and blade as described in Re-
moving the Blade and Fan.
2. For a Lower Cut - Add spacers to a maximum of 3.
3. For a Higher Cut - Take spacers away.
4. Refit the blade as described in Fitting the Blade and Fan.
Q
