780045
140
Verklein
Vergroot
Pagina terug
1/249
Pagina verder
138
opposite directions. Usually, an “R” is embossed
on the right pedal with an “L” on the left. Screw
the right pedal clockwise and the left pedal anti-
clockwise into the cranks.
The pedals must be fastened with a suit-
able spanner. Adhere to the correct fas-
tening torque when screwing on the ped-
als, see Chapter 23.2 “Fastening torques
for screw connections”. Ensure that the
pedals are tted straight. If they are tted
at an angle, there is a danger of break-
ing and of having a fall!
We advise against the use of pedals with
hooks and straps.
Ensure that you have read the manufac-
turer‘s instructions before using magnet-
ic or clipless pedals. Practise clipping
your shoes in and out of the pedals‘ lock-
ing system before your rst ride in a qui-
et, safe place. Clipless pedals which do
not properly release are a safety hazard.
The release force of system pedals can
be adjusted. Please test this on your rst
ride with a setting that releases easily.
Regularly clean the system pedals and
service them with a suitable lubricant.
11.1 Operating quick releases and
axles
The wheels, seat post, seat, stem and handlebars
may be attached with quick release fasteners,
quick release axles or screw connections.
Only allow your FLYER specialist re-
tailer to perform work on quick release
fasteners and quick release axles.
These are components which are cru-
cial for your safety, so incorrect work
and tools in this area of the bicycle
could lead to serious falls.
Quick release
Quick releases are clamping brackets which at-
tach components like a screw, however their
clamping force stems from tightening the lever
without tools. The clamping force is activated by
opening and closing the lever. The clamping force
is adjusted by turning the counter nut when the
lever is open.
1. In order to open a quick release, to adjust
the seat post for example, open the quick
release lever.
2. Now you can move and adjust the seat post.
3. The quick release fastener must be closed
before using the FLYER. Completely
fold down the quick release lever for that
purpose. Fully engage any possible safety
devices.
The quick release is only securely
closed when you need the power of the
ball of your hand to close the lever.
The adjustment nut of the quick release fastener
must be tightened when the tightening force is not
high enough, e.g. when the seat does not stay in
position. To do this, the quick release lever must
be open.
The quick release fastener cannot be closed
when the tightening force is too high. Open the
clamping lever in this case and slightly loosen the
adjustment nut.
All quick release skewers must be
rmly closed before you set off.
Check all quick release fasteners for
correct attachment if the vehicle was
parked for a short time without super-
vision and before every ride.
A closed quick release fastener must
be folded close to the frame, fork or
seat post.
Lock down wheels or other parts of your
vehicle that are attached with quick release
fasteners when you park your bicycle.
Quick release axles
The current chassis is either equipped with quick
release fasteners, screw connectors or quick re-
lease axles that work in the same way as quick
release fasteners:
The axle is screwed into the dropout and holds the
hub between the fork legs. The hub and the axle
are fastened with a quick release lever. Systems
in which the axle is only inserted or screwed in
Tightening the Adjusting
Nut
Loosening the Adjusting
Nut
140

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Flyer Urban - Bosch 2016 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Flyer Urban - Bosch 2016 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Noors als bijlage per email.

De handleiding is 9.39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info