732994
153
Verklein
Vergroot
Pagina terug
1/275
Pagina verder
151
EN
You can then remove the
front wheel according to
the steps listed above.
The following applies for rear wheels:
If your bicycle uses a derailleur gear system,
change gear to the smallest sprocket. In this
position, the rear derailleur poses the least hin
-
drance in removing the wheel.
If your bicycle has quick-release levers or ax
-
les, open them.
If your bicycle has hexagonal bolts, then loos
-
en them in anti-clockwise direction with a tting
ring spanner or box-end wrench.
Pull the rear derailleur backwards somewhat.
Lift the bicycle slightly.
Lightly strike the wheel from above with the
palm of the hand.
Take the wheel out of the frame.
If your bicycle has a gear hub, please consult the
instructions supplied by your manufacturer for re
-
moving the wheel.
The valve to your FLYER e-bike’s inner tube
3. Removing the tyre and inner tube
Unscrew the valve cap, the fastening nut and
possibly the cap nut from the valve.
Release all of the remaining air from the inner
tube.
Insert the tyre lever opposite the valve on the
inside of the tyre.
Insert the second tyre lever approx. 10 cm from
the rst, between the rim and tyre. Lift the tyre
wall over the edge of the rim.
Repeat this lifting action around the wheel until
the entire tyre is free.
Remove the inner tube from the tyre.
Schrader valve
4. Change the inner tube
Switch the inner tube for an intact one.
Tubular tires and tubeless tires must be
changed according to the tires and rims’
manufacturers instructions.
5. Reassembling the tyre and inner tube
Please avoid allowing foreign bodies in-
side the tyre. Ensure that the inner tube
does not have any folds and is not
squashed.
Ensure that the rim tape covers all spoke
nipples and does not have any damage.
Place one edge of the rim into the tyre.
Push one side of the tyre completely into the
rim.
Insert the valve through the valve hole in the
rim and put the inner tube into the tyre.
Pull the second side of the tyre into the rim with
the balls of your hands.
Ensure that the inner tube is correctly posi
-
tioned.
Pump the inner tube up somewhat.
Check that the tyre is properly in place and
runs true using the control ring on the side of
the tyre. Adjust the positioning of the tyre with
your hand if it does not quite run true.
Pump the inner tube up to the recommended
tyre pressure.
Please take note of the running direction
of the tyre when installing it.
6. Reattaching the wheel
Reattach the wheel securely back in the frame or
fork with the corresponding quick release, bolted
connection or full oating axle mechanism.
If your bicycle has disc brakes, please
ensure that the brake discs are correctly
secured between the brake pads!
Read the gear manufacturer‘s instructions to cor
-
rectly and safely assemble and set up derailleur
gear systems, gear hubs and combined hub and
derailleur gear systems.
Tighten all screws to the recommended
torque. Failing to do so could cause the
screws to tear and components to come
apart.
Source: Shimano
®
techdocs
153

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Flyer RS serie - Panasonic bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Flyer RS serie - Panasonic in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Noors als bijlage per email.

De handleiding is 11,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Flyer RS serie - Panasonic

Flyer RS serie - Panasonic Gebruiksaanwijzing - Nederlands - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info