732994
141
Verklein
Vergroot
Pagina terug
1/275
Pagina verder
139
EN
Loading the battery
The battery can be charged while it is installed in
the e-bike or once it has been removed.
1) Remove the rubber cap
Open the rubber cap on the battery.
Connect the mains plug to a mains socket (220
V - 240 V AC) and connect the charger to the
battery.
Do not connect the charger to the mains
socket immediately after a sudden tem-
perature change from cold to warm. It is
possible that condensed water has col-
lected on the contacts and this will lead
to a short circuit. Do not connect the bat-
tery to the charger immediately after a
sudden temperature change from cold to
warm. Wait until both devices have
reached room temperature before con-
necting the charger or the battery. Al-
ways charge and store the battery and
the charger in a dry and clean environ-
ment.
2) Check the LED charge status indicator
Check whether the charge status LED is lit up.
The LED lights up according to the charge status.
The charge status LED goes off when the charg-
ing process has been completed.
The charging time takes longer if the
battery temperature is too low or too
high.
A fully charged battery cannot be charged any
further.
The battery may not be recharged when
it indicates a fault. The battery might be
damaged after being dropped or due to
mechanical impact, even when there is
no visible external damage. Such batter-
ies must therefore be inspected by a
FLYER specialist retailer. Never try to
open a battery or to repair it.
Protective cap
Charger
3) Remove the plug from the power outlet
Separate the mains plug from the mains socket
after disconnecting the battery from the charger.
It is important that the rubber cap is rmly reat-
tached before using the battery.
Safety warning regarding the battery charger
The name plate refers to warning notes and other
safety information in connection with handling the
charger. It is important to read them before using
the charger.
Use only the original Panasonic
charger supplied along with your
e-bike. Only this charger is designed for
the lithium-ion battery used on your
e-bike.
Completely charge the battery using the
charger before the rst ride to ensure full
battery performance. Read and adhere
to the operating instructions for the
charger when loading the battery.
The battery can at any time be charged outside
or installed in the bicycle without reducing its life
span. Interrupting the charging process does not
damage the battery.
The battery is equipped with a temperature moni-
tor that permits charging only within a tempera-
ture range of 0 °C to 40 °C. If the battery temper-
ature is too high, the battery will not charge. In
addition, if you press the control button for the
LED battery charge level, the LED at the very top
[F] and bottom [E] will blink.
Separate the battery from the charger and wait
until it has reached operating temperature. Only
reconnect the charger when it has reached the
permitted operating temperature.
141

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Flyer RS serie - Panasonic bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Flyer RS serie - Panasonic in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Noors als bijlage per email.

De handleiding is 11,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Flyer RS serie - Panasonic

Flyer RS serie - Panasonic Gebruiksaanwijzing - Nederlands - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info