733021
195
Verklein
Vergroot
Pagina terug
1/264
Pagina verder
193
EN
Seat position
The horizontal position of the seat can and should
be set too.
You are in the optimal driving positon when your
front knee is directly above the pedal while the
crank is horizontally aligned.
The horizontal adjustment of the seat may only
be performed within the markers and within the
range specied by the manufacturer.
Test whether the seat post and the seat
are rmly attached before you drive off. To
do this, hold the seat at the front and back
and attempt to turn it. It should not move.
Height of the handlebars
Once the seat has been rmly and comfortably
positioned, the handlebars must be adjusted to
your needs.
An effective starting position for relaxed riding
is offered by a seating position in which the up
-
per body and arm form a 90° angle. In order to
change the height of the handlebars, the height of
the stem must be adjusted.
Allow your FLYER specialist retailer to
adjust the settings of the handlebars and
the stem.
Adjusting the stem
You are strongly advised to read the
manufacturers instruction manual. Only
allow FLYER specialists to work on your
handlebars and stem!
Changing the position of the stem also
changes the position of the handlebars.
You should always be able to safely
reach and use grips and controls. Han
-
dles with a pronounced wing shape may
need to be repositioned.
Make sure that all cables and leads have a
sufcient length to allow for all possible
steering movements when changing the
handlebar and stem position.
11.3 Setting up the brake levers
The brake lever must be adjusted in
such a way that the hands remain paral
-
lel to the arms and they can press the
brake lever without have to exert any
strenuous effort.
Check before your rst drive which
brake lever brakes which wheel.
Some models allow adjustment of the grip width
so that brake levers can also be safely gripped by
smaller hands. Always have brake adjustments
performed by a FLYER specialist retailer as they
concern safety-related components.
The brake levers must be adjusted to ensure that
they do not touch the handlebars, even when they
are pulled hard.
11.4 Suspension elements
The chassis must be adjusted to the driver's
weight and type of use by a FLYER specialist
retailer to ensure appropriate function of the sus
-
pension elements.
The suspension elements must be matched to
each other in accordance with the manufacturer's
instructions. Basically, it can be stated that when
cycling over bumps, while the suspension ele
-
ment can be clearly seen to operate, it should not
reach the end of its travel. With the rider stand
-
ing centrally on the bike, the suspension element
should be compressed to about 25% of its travel.
Please note that the suspension may
need be reset if you ride with heavier
loads, for example during a cycle tour.
If you have purchased a FLYER E-MTB with full
suspension, the rear frame assembly is moveable
and is sprung and damped by a shock absorber.
The suspension system uses an air chamber.
The damping, which regulates the speed of com
-
pression and stretching, can be adjusted with the
shock absorbers installed.
195

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Flyer Mountain - Bosch 2019 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Flyer Mountain - Bosch 2019 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 7,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info