803528
317
Verklein
Vergroot
Pagina terug
1/412
Pagina verder
69
EN
Theaxlenutsmustbecorrectlyfastened
after each chain adjustment process.
Work may only be performed on the
chain once the electrical system has
been switched o󰀨 and the battery has
been removed. If the chain of your
FLYER e-bike has fallen o󰀨 the chain
ring or sprocket, it is essential to switch
o󰀨theelectricalsystemandremovethe
battery before placing the chain back on
the gear wheels.
Chain care
The drive chain must be cleaned and lubricated
regularly in order to ensure that it functions well
(see section “Inspection plan”).
Dirtcansimplybewashedo󰀨.Youcanalsoclean
the chain by wiping it with an oil-soaked cloth.
Once it is clean, it must be lubricated at the joints
with a suitable lubricant. After leaving for a short
while,wipeo󰀨theexcesslubricant.
Belt drive
The Gates Carbon Drive belt is very durable and
long-lasting. However, you must take extreme
care before and during assembly to ensure that
no damage is caused to the carbon bres that
makeupthe strengthof thedrivebelt. Extreme
bending and twisting causes tears that can lead to
faults in the belt if subjected to high stress.
1
10-15 mm
2
3
Follow the instructions for handling the Gates
Carbon Drive System belt and observe the provi-
sions in the user manual.
Drive belt and chain tighten if the bike has
sliding dropouts
Adjusting the tension and alignment of
thebeltrequiresagreatdealofexperi-
ence. Improper handling can cause acci-
dents and severe falls. Always let your
FLYER specialist retailer perform this
activity.
If the tension of the drive belt is too low,
this can cause it to slip on the toothed
pulley. This may result in accidents or
severe falls.
The carbon bres inside the drive belt
may also be damaged. If the drive belt
slips through, take it to a specialist to be
checked over.
If the tension of the drive belt is too high,
bearings and seals in the wheel hub can
become damaged. The wear and friction
losses on the entire drive are therefore
also higher.
Thecarbonbresinsidethedrivebeltmayalso
be damaged. If the drive belt slips through, take it
to a specialist to be checked.
If the tension of the drive belt is too high, bearings
and seals in the wheel hub can become dam-
aged. The wear and friction losses on the entire
drive are therefore also higher.
Tightening the toothed belt
Loosen the screws A1 on both sides of the dro-
pout. You only need to loosen the
screws until the dropout can move freely.
A1
Tighten the chain/toothed belt using the adjusting
screw A2. You have reached the correct chain
tension when the chain is still able to move up
and down slightly in the centre (10-15 mm). Use
a belt tension measuring device to check that the
belt tension is correct. Consult the belt manufac-
317

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Flyer Crossocver - Fit 2022 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Flyer Crossocver - Fit 2022 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 34.98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info