803528
312
Verklein
Vergroot
Pagina terug
1/412
Pagina verder
64
Inordertoadjusttheexibilityofyoursuspension
element,youmustcongurethesuspensionsti󰀨-
ness/air pressure. If you change the air pressure,
the overall sti󰀨ness of the suspension element
also changes. The more the suspension element
is pumped up, the harder it becomes. In order to
achieve an optimum balance between the manu-
facturer’srecommendedexibilityandthedesired
sti󰀨ness,followtheseinstructionswhenadjusting
the suspension element:
Adjustingtheexibility
Ensure that the pressure stages on the fork and
rear shock are set to the “open” position.
Fill the air chamber, using the table as a guide.
To let air out of the air chamber, remove the air
cap and press the valve pin down or press the air
release button on the suspension pump.
The air pressure in the rear suspension
elementmustnotexceedthemaximum
valuespeciedintherelevantoperating
instructions.
There are guidelines on air pressure for certain
forks.
1. Di󰀨erent air pressures or settings
may be necessary. Example: Di󰀨er-
ent driving styles and uses require a
di󰀨erent air pressure and exibility.
Therefore, this adjustment procedure
is just a starting point.
2. The valve cap must always be on the
suspension element while you are
riding so that dirt cannot get into the
valve.
Push the O-ring for the suspension path indicator
against the air chamber/the lower fork dip pipe.
Carefully position yourself centrally on the bike,
thengeto󰀨again.
Important:ifyouexerttoomuchforceonthebike
whilegettingonando󰀨,youwillobtainimprecise
measurements.
Check the position of the O-ring on the housing
of the suspension element. Check whether the
exibilityisaround25%.
If the exibility is lower than the value recom-
mended by the bicycle manufacturer, i.e. the
suspension element is compressed by less than
25%, reduce the air pressure.
If the exibility is higher than the value recom-
mended by the bicycle manufacturer, increase the
air pressure. The air pressure in the rear damper
mustnotexceedthemaximumvaluespeciedin
the relevant operating instructions.
Replace the air cap.
Adjustable rebound
The rebound determines the speed at which the
suspensionelementreturnstoitsfullyextended
position after compressing. The suspension ele-
ments have a red rebound dial that you can use
to adjust the rebound. The suspension element
extendsfastestwhentheadjustingknobisturned
anti-clockwiseuptothestop.Itextendsslowest
when the knob is turned to the stop in the clock-
wise direction.
Setting the rebound
You can determine the starting point for setting
the rebound at the curb.
Theexibilityofthesuspensionmustbe
adjusted before you can adjust the re-
bound of the damping.
Perform the test in a safe area with no
tra󰀩c.
Turn the rebound dial anti-clockwise until it reach-
es the stop.
Ridethebikeo󰀨thepavementwhileyouaresit-
ting on the seat.
Count the number of times the suspension ele-
ment rebounds.
It should be adjusted so that it rebounds just once.
If it rebounds several times, turn the rebound dial
clockwiseoneclick.Rideo󰀨thepavementagain
and count how many times the suspension ele-
ment rebounds. Repeat this step until the suspen-
sion element rebounds only once.
Note the number of clicks (or turns) through which
you moved the dial from the anti-clockwise stop.
This is your rebound setting.
If the rebound is set correctly for a suspension
fork,the front wheelshould notlift o󰀨when the
fork is compressed when stationary and abruptly
released.Ifthefrontwheelliftso󰀨thegrounddur-
ing this test, turn the rebound through one further
click and repeat the test.
The suspension changes the distance
between the pedal and the ground while
riding. When riding over bumps, always
keep the crank arms in the horizontal po-
sition. When riding around bends, keep
the crank arms in the vertical position
with your foot down on the outside of the
bend in order to prevent the pedals from
touching the ground.
Suspension and chassis components
are vital parts of your FLYER. Service
and check your FLYER suspension at
regular intervals. Have your FLYER in-
312

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Flyer Crossocver - Fit 2022 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Flyer Crossocver - Fit 2022 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 34.98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info