803528
281
Verklein
Vergroot
Pagina terug
1/412
Pagina verder
33
EN
Always remove the battery before clean-
ing, maintaining or repairing your e-bike.
Ensure that you do not touch and thus
possibly connect contacts when clean-
ing or maintaining the battery.
You risk being hurt and the battery may
su󰀨erdamageifthecontactsarelive.
Do not use a strong water jet or high-pres-
sure cleaner for cleaning. The cleaning
liquid may enter sealed bearings due to
high pressure, dilute the lubricant and in-
crease friction. As a result, rust is formed
which destroys the bearings. Cleaning
with a high-pressure cleaner may dam-
age the electrical system.
The following are not suitable for clean-
ing your FLYER e-bike:
Acids
Fats
Oil
Brake cleaner (only to use on brake
discs)
Solvent-based liquids.
These damage the surfaces and contrib-
ute to wear on the FLYER e-bike.
After use, ensure that you dispose of the
lubricant, cleaning and care products in
an environmentally friendly way. These
substances do not belong in domestic
waste, in the drain or in natural environ-
ments.
Smooth operation and durability of your
FLYER e-bike depend on appropriate
maintenance and care for your FLYER.
Regularly clean your FLYER with
warm water, small amounts of clean-
ing agent and a sponge.
While cleaning the FLYER, always
check your e-bike for cracks, notches
or material deformities.
Damaged parts must be replaced with
original spare parts. Please only ride
your FLYER again after this check
has been carried out.
Have any paint damage removed by
your FLYER specialist retailer.
Further important information concerning care for
your FLYER e-bike is provided on the website of
the respective component manufacturer.
Speed sensor
The speed sensor is used to show the speed in
the FLYER display and correctly calculate the as-
sistance needed.
The speed sensor and the associated spoke magnet
must be fastened so that the distance between the
spoke magnet and the marking position on the speed
sensoris1to5mm.If the distanceisdi󰀨erent,an
error message will appear.
Powersupplytoexternaldevices
YoucanusetheUSBporttochargeexternalde-
vices, e.g. smartphones, that can be powered via
USB. The charging cable of the device can be
connected directly to the FLYER display.
Inordertochargeexternaldevices,yourFLYER
e-bike must contain a charged FLYER battery.
Open the cover of the USB port on the display
and connect the charging cable to it.
Do not place the connected device on
a tilted or unstable place while charg-
ing. Otherwise, it could fall and be-
come damaged.
Do not charge external devices in
rainy weather or connect a wet USB
cable. The USB connection is not wa-
terproof!
You must not connect external de-
vices when riding in the rain and the
USB port must be completely covered
by the protective cap.
After using the USB port, be sure to
rmlytightentherubbercap.
Make sure that the voltage of the USB
port is suitable for your device. (See the
technical data for the voltages)
281

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Flyer Crossocver - Fit 2022 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Flyer Crossocver - Fit 2022 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 34.98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info