775815
10
Verklein
Vergroot
Pagina terug
1/21
Pagina verder
August 2014, Rev. 2 9/2017
©2014, 2017 Fluke Corporation
All product names are trademarks of their respective companies.
IntelliTone Pro
200 LAN Toner and 200 Probe
Users Manual
LIMITED WARRANTY AND LIMITATION OF LIABILITY
Each Fluke Networks product is warranted to be free from defects in material and workmanship under normal use and service
unless stated otherwise herein. The warranty period for the mainframe is one year and begins on the date of purchase. Parts,
accessories, product repairs and services are warranted for 90 days, unless otherwise stated. Ni-Cad, Ni-MH and Li-Ion batteries,
cables or other peripherals are all considered parts or accessories. The warranty extends only to the original buyer or end user
customer of a Fluke Networks authorized reseller, and does not apply to any product which, in Fluke Networks’ opinion, has been
misused, abused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation or handling.
Fluke Networks warrants that software will operate substantially in accordance with its functional specifications for 90 days and
that it has been properly recorded on non-defective media. Fluke Networks does not warrant that software will be error free or
operate without interruption.
Fluke Networks authorized resellers shall extend this warranty on new and unused products to end-user customers only but have
no authority to extend a greater or different warranty on behalf of Fluke Networks. Warranty support is available only if product
is purchased through a Fluke Networks authorized sales outlet or Buyer has paid the applicable international price. To the extent
permitted by law, Fluke Networks reserves the right to invoice Buyer for repair/replacement when a product purchased in one
country is submitted for repair in another country.
For a list of authorized resellers, visit www.flukenetworks.com/wheretobuy.
Fluke Networks warranty obligation is limited, at Fluke Networks option, to refund of the purchase price, free of charge repair, or
replacement of a defective product which is returned to a Fluke Networks authorized service center within the warranty period.
To obtain warranty service, contact your nearest Fluke Networks authorized service center to obtain return authorization
information, then send the product to that service center, with a description of the difficulty, postage and insurance prepaid (FOB
destination). Fluke Networks assumes no risk for damage in transit. Following warranty repair, the product will be returned to
Buyer, transportation prepaid (FOB destination). If Fluke Networks determines that failure was caused by neglect, misuse,
contamination, alteration, accident or abnormal condition of operation or handling, or normal wear and tear of mechanical
components, Fluke Networks will provide an estimate of repair costs and obtain authorization before commencing the work.
Following repair, the product will be returned to the Buyer transportation prepaid and the Buyer will be billed for the repair and
return transportation charges (FOB Shipping point).
THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
FLUKE NETWORKS SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES,
INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.
Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental or
consequential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this
Warranty is held invalid or unenforceable by a court or other decision-maker of competent jurisdiction, such holding will not affect
the validity or enforceability of any other provision.
4/15
Fluke Networks
PO Box 777
Everett, WA 98206-0777
USA
i
Contents
Title Page
Overview of Features ................................................................................................... 1
Registration .................................................................................................................. 1
Contacting Fluke Networks ......................................................................................... 2
Unpacking ..................................................................................................................... 2
IT200 IntelliTone Pro LAN Kit ................................................................................. 2
IT200 IntelliTone Pro LAN Toner ............................................................................ 2
IP200 IntelliTone Pro Probe .................................................................................... 2
Symbols ......................................................................................................................... 2
WSafety Information ............................................................................................ 4
Battery Status ............................................................................................................... 4
Auto Power Down ........................................................................................................ 4
Locating and Isolating Terminated UTP/STP Cables with the IntelliTone ................. 5
IntelliTone Pro 200 LAN
Users Manual
ii
Isolating Individual Wire Pairs with the SmartTone Analog Function ...................... 7
SmartTone Positive Identification .......................................................................... 7
Validating RJ11 and RJ45 Cable Maps ........................................................................ 8
Validating the Cable’s Shield ....................................................................................... 10
Validating Ethernet Service ......................................................................................... 11
Testing for Continuity .................................................................................................. 12
Maintenance ................................................................................................................. 12
Battery Life and Replacement ................................................................................ 13
Accessories ............................................................................................................... 14
Specifications ................................................................................................................ 15
IT200 Toner Electrical Specifications ...................................................................... 16
IP200 Probe Electrical Specifications ...................................................................... 16
Feature Compatibility ............................................................................................. 17
Dimensions ............................................................................................................... 17
Weight (with battery) ............................................................................................. 17
1
IntelliTone Pro 200 LAN Toner
IntelliTone Pro 200 Probe
Overview of Features
The IntelliTonePro 200 LAN toner and Pro 200 probe let
you locate, isolate, and validate twisted pair (UTP, Cat 5e,
Cat 6), coax cables (RG6, RG59, and others for CATV/CCTV),
bare wire (such as speaker wire and security network
wire), and Cat 3 telephone cabling. The toner also lets you
validate data services.
The toner and probe feature both digital and analog
toning and detection. The digital IntelliTone tone is
primarily used on data cables, and on active networks. In
these environments, the digital signal eliminates cable
misidentification due to signal bleed and radiated or
ambient noise.
The analog tone is primarily used on voice cables, and on
bare wire. The SmartTone analog technology will change
cadence when a pair is shorted at the far end. This makes
exact pair identification easy and precise.
The IntelliTone feature also lets you use the toner and
probe to validate and troubleshoot wiring on RJ11 and
RJ45 cables.
The toner detects Ethernet service and indicates active pair
number on Ethernet circuits.
The toner and probe also provide standard functions such
as visual and audible signal strength indication, digital
toning/detection, SmartTone analog toning/detection, and
continuity testing.
Registration
Registering your product with Fluke Networks gives you
access to valuable information on product updates,
troubleshooting tips, and other support services. To
register, fill out the online registration form on the Fluke
Networks website at www.flukenetworks.com/
registration.
IntelliTone Pro 200 LAN
Users Manual
2
Contacting Fluke Networks
Fluke Networks operates in more than 50 countries
worldwide. For more contact information, go to our
website.
Unpacking
The IntelliTone products come with the accessories listed
below. If an accessory is damaged or missing, contact the
place of purchase immediately.
IT200 IntelliTone Pro LAN Kit
IT200 Toner with 9 V battery
IP200 Probe with 9 V battery
2 RJ11 to RJ11 patch cords
2 RJ45 to RJ45 patch cords
Test lead set, banana jacks to alligator clips
F connector adapter, female to female
Quick Reference Guide
IT200 IntelliTone Pro LAN Toner
IT200 Toner with 9 V battery
1 RJ11 to RJ11 patch cord
1 RJ45 to RJ45 patch cord
Test lead set, banana jacks to alligator clips
F connector adapter, female to female
Quick Reference Guide
IP200 IntelliTone Pro Probe
IP200 Probe with 9 V battery
Quick Reference Guide
Symbols
Table 1 describes the symbols used on the tester and in this
manual.
www.flukenetworks.com/support
info@flukenetworks.com
1-800-283-5853, +1-425-446-5500
Fluke Networks
6920 Seaway Boulevard, MS 143F
Everett WA 98203 USA
Symbols
3
Table 1. Symbols
Warning or Caution: Risk of damage or destruction
to equipment or software. See explanations in the
manuals.
Warning: Risk of fire, electric shock, or personal
injury.
This equipment not for connection to public
communications networks, such as active
telephone systems.
Consult the user documentation.
This product complies with the WEEE Directive
marking requirements. The affixed label indicates
that you must not discard this electrical/electronic
product in domestic household waste. Product
Category: With reference to the equipment types
in the WEEE Directive Annex I, this product is
classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this
product as unsorted municipal waste.
To return unwanted products, contact the
manufacturer’s web site shown on the product or
your local sales office or distributor.
40 year Environment Friendly Use Period (EFUP)
under China Regulation - Administrative Measure
on the Control of Pollution Caused by Electronic
Information Products. This is the period of time
before any of the identified hazardous substances
are likely to leak out, causing possible harm to
health and the environment.
Conformite Europeene. Conforms to the
requirements of the European Union and the
European Free Trade Association (EFTA).
Korea (KCC): Class A Equipment (Industrial
Broadcasting and Communication Equipment).
Class A: Equipment meets requirements for
industrial electromagnetic wave equipment and
the seller or user should take notice of it. This
equipment is intended for use in business
environments and is not to be used in homes.
Conforms to relevant Australian standards.
W
X
j
~
P
IntelliTone Pro 200 LAN
Users Manual
4
WSafety Information
W
Warning
X
To prevent possible fire, electric shock, or
personal injury:
Never use the toner, probe, or test leads if they
are damaged. Inspect the cases and test leads for
damage before use.
Never open the case except to change the battery;
no user-serviceable parts are inside.
Turn off the toner or probe and disconnect all test
leads before replacing the battery.
Use only a 9V battery, properly installed in the
case, to power the toner and probe.
If this equipment is used in a manner not specified
by the manufacturer, the protection provided by
the equipment may be impaired.
W
Caution
Avoid touching the probe tip to patch panel
connections and using the tip to dig into cable
bundles. Doing so regularly may damage the
probe tip over time.
To avoid unreliable test results, replace the
battery as soon as the low battery indication
appears.
Battery Status
LEDs on the toner and probe light for 1 second at power
on to indicate the battery status:
Green: Battery is good.
Yellow: Battery is marginal.
Red: Battery is low.
See “Battery Life and Replacement” on page 16 for more
information on the battery.
Auto Power Down
The toner turns off automatically after approximately 2 ½
hours of inactivity. The probe turns off automatically after
1 hour of inactivity.
Toner battery status
LED Probe battery status
LED
Locating and Isolating Terminated UTP/STP Cables with the IntelliTone
5
To reactivate the toner or probe, turn the rotary switch to
any position except OFF.
Locating and Isolating Terminated
UTP/STP Cables with the IntelliTone
The IntelliTone Pro toner provides two toning modes for
locating and isolating cables: one digital tone and
the SmartTone analog tones (500 Hz to 1200 Hz) .
With the toner set to digital tone mode, the probe can be
set to either locate or isolate .
Both toning signals are available at all connectors on the
toner.
The digital tone is optimized for 4 pair UTP data
environments and the SmartTone analog tone is
optimized for two wire locating.
To locate and isolate cables using the digital tone, do the
following:
1
Connect the IT200 toner to a jack or punch-down block
as shown in Figure 1.
2
Turn the toner’s rotary switch to .
3
Turn the IP200 probe’s rotary switch to (locate).
4
Use the probe to find the general location of the tone
at a cable rack, patch panel, or behind a wall. The
SYNC LED lights up green when the probe is receiving
the IntelliTone signal.
In locating mode, the probe’s LEDs light up from 1 to 8
as the signal strength increases. The higher the
number, the stronger the signal.
Note
If you cannot locate the IntelliTone signal on
2-conductor cables, the cable may be shorted. Use
the cable map test (page 8) to test for shorts on
cables with RJ11 and RJ45 connectors. Use the
continuity test (page 12) to check for shorts on
coax and non-terminated cables.
5
Turn the probe’s rotary switch to (isolate).
6
Use the probe to isolate the tone source in the cable
bundle or at the patch panel. The SYNC LED lights up
green when the probe is receiving the IntelliTone
signal.
In isolating mode, the probes LEDs light up from 1 to 8 as
the signal strength increases.
IntelliTone Pro 200 LAN
Users Manual
6
ASH04.EPS
Figure 1. Locating and Isolating Cables
Locating Cables Isolating Cables
Volume
control
Digital
toning
SmartTone
TM
,
Analog 1kHz
toning
Connecting the Toner
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fluke networks IntelliTone Pro 200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fluke networks IntelliTone Pro 200 in de taal/talen: Engels als bijlage per email.

De handleiding is 0.72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Fluke networks IntelliTone Pro 200

Fluke networks IntelliTone Pro 200 Snelstart handleiding - Deutsch, English, Français, Espanõl - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info