775833
8
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
January 2016 Rev. 2, 8/21
©2016-2021 Fluke Corporation. All rights reserved.
All product names are trademarks of their respective companies.
FlukeView 2
Software for ScopeMeter Test Too l
and Motor Drive Analyzer Test Tool
Users Manual
License Agreement
© 2006-2021 Fluke Corporation.
The information contained in this document is subject to change without notice. Fluke, the Fluke logo and FlukeView are trademarks of Fluke
Corporation. Windows is a trademark of Microsoft Corporation.
All other trademarks are the property of their respective holders.
END USER LICENSE AGREEMENT (EULA)
The enclosed software product is furnished subject to the terms and conditions of this agreement. Retention of the software product for more
than thirty days, opening the sealed wrapper surrounding the product, or use of the product in any manner will be considered acceptance of the
agreement terms. If these terms are not acceptable, the unused product and any accompanying written material should be returned promptly to
Fluke or the place of purchase for a full refund of the license fee paid.
1. GRANT OF LICENSE. Fluke Corporation (Fluke) grants you the right to use the enclosed software in accordance with the terms of this
EULA. This grant of license does not include the right to modify or distribute the software.
2. TITLE, COPYRIGHT AND TRADEMARK. This software product is owned by Fluke or its suppliers and is protected by United States
copyright laws and international treaty provisions. Therefore, except for the rights granted to you above, you must treat the software product like
any other copyrighted material, and any copies must include the proper copyright notice.
3. RESTRICTIONS. You may not reverse engineer, decompile, or disassemble the software. If the software product is an update, any transfer
must include the update and all prior versions. You may use the software only in conjunction with the Fluke products for which it is intended.
You may not export or re-export the software to any country to which such export or reexport is restricted by law or regulation of the United
States, or any other government having jurisdiction, without prior permission from Fluke.
4. TERM. This license agreement is effective upon your acceptance and shall remain in effect until terminated by (a) written notification to Fluke
or (b) a failure on your part to comply with the license agreement. Upon termination of the license agreement, you shall return to Fluke or
destroy all copies of the software product and associated written materials.
5. OTHER AGREEMENTS. Where terms or conditions of this agreement conflict with terms or conditions of other agreements, this agreement
supersedes other agreements.
6. LIMITED WARRANTY. Fluke warrants that the software product will perform in its intended environment substantially in accordance with the
accompanying written materials for a period of 90 days from the date of license acceptance. Fluke further warrants that the original copy of the
software has been recorded on non-defective media. Fluke does not warrant that the software will be error free or operate without interruption.
7. REMEDIES. Fluke’s entire liability and your exclusive remedy shall be at Fluke’s option, (a) the return of the price paid for the product, or (b)
repair or replacement of the software product that does not meet the limited warranty. This limited warranty is void if failure of the product has
resulted from accident, abuse, or misapplication. Any replacement software product will be warranted for the remainder of the 90-day original
warranty period or 30 days, whichever is longer.
8. NO OTHER WARRANTIES. FLUKE DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED BUT NOT LIMITED TO
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE
PRODUCT AND THE ACCOMPANYING WRITTEN MATERIALS. In no event shall Fluke or its suppliers be liable for any damages whatsoever
(including, without limitation, indirect, consequential, or incidental damages, damages for loss of business profits, business interruption, loss of
business information, or other pecuniary loss) arising out of the use of or inability to use this software product, even if Fluke has been advised of
the possibility of such damages.
9. GOVERNING LAW. This agreement and license shall be governed in the United States by the laws of the State of Washington, U.S.A., and
elsewhere by the laws of the country within which the agreement is made.
i
Title Page
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Contact Fluke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Software Activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
MDA/190 II/190 III Test Tool Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
120B ScopeMeter Test Tool Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Software Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Main Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
How to Work with Setups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
How to Work with Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
How to Work with 120B Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Save Data to File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Table of Contents
FlukeView® 2
Users Manual
ii
1
Introduction
FlukeView2 software works with your ScopeMeter® Test Too l
or Motor Drive Analyzer Test Tool. With FlukeView 2 you can:
Document: Transfer screens, waveforms, and
measurement data from the Test Tool to your PC to print,
or to import data into other programs.
Archive: Store and retrieve screens or waveforms with text
annotations and create your own library for easy reference
and comparison.
Analyze: Gather valuable measurement data and enable
cursor measurement to reveal relationship and conditions.
The setup program installs the FlukeView 2 software on PCs
that operate on Windows 10, or later.
Contact Fluke
Fluke Corporation operates worldwide. For local contact
information, go to our website: www.fluke.com.
To register your product, view, print, or download the latest
manual or manual supplement, go to our website.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
+1-425-446-5500
fluke-info@fluke.com
FlukeView® 2
Users Manual
2
Installation
The software is available to download from the Fluke website:
www.fluke.com/support/software-downloads.
To install software:
1. Run the installation program from the download.
The setup program starts up.
2. Follow the on-screen instructions to complete the
installation.
Software Activation
Your purchase of the Test Tool includes FlukeView 2 software
that is a demo version with limited capabilities. When the
demo version of FlukeView 2 opens, the Activation dialog
opens and prompts for an activation key.
To activate the software for the full version:
1. Type your 15-digit activation key in the Activation dialog
box.
Fluke provides the activation key with the purchase of
software.
2. Select Activate for the full functionality of FlukeView 2.
If you do not have a key, select DEMO to continue to use
the demo version with limited functionality.
MDA/190 II/190 III Test Tool Connections
FlukeView 2 software communicates with the Test Tool
through WiFi (Series III) or the optional USB cable. See
Figure 1.
Also see the Test Tool Users Manual for more information.
To use with WiFi:
1. Insert the WiFi adapter. The tool automatically detects the
adapter and turns on WiFi.
2. To check the WiFi settings push F on your Test Tool.
Push 1 to turn on or turn off the WiFi.
3. On the PC, use the SSID of the Test Tool to establish a
WiFi connection to the PC.
Note
If the PC is connected by WiFi to a wireless access
point that provides Internet access, this connection is
lost when you connect to the Test Tool.
4. Select Connect.
To use with USB cable:
1. When you use the USB (A to mini B) cable for the first time,
the driver for the cable automatically installs on the PC.
2. Select Connect.
ScopeMeter and Motor Drive Analyzer Software
Installation
3
Figure 1. Test Tool to PC Connections
FlukeView® 2
Users Manual
4
120B ScopeMeter Test Tool Connections
FlukeView 2 software communicates with the Test Tool
through WiFi or the optional optically-isolated USB cable,
OC4USB. See Figure 2. Also see the 123B/124B/125B
ScopeMeter Test Tool Users Manual for more information.
To use with WiFi:
1. Turn on WiFi in the Test Tool.
Note
Fluke 120B Series: Push + to turn on the
WiFi. shows in the Information area.
2. On the PC, use the SSID of the Test Tool to establish a
WiFi connection to the PC.
Note
If the PC is connected by WiFi to a wireless access
point providing Internet access, this connection is lost
when you connect to the Test Tool.
3. Select Connect.
To use with USB:
1. Connect the PC with the optional OC4USB cable.
When using this cable for the first time, the FTDI driver for
the cable automatically installs. The driver installation
requires an Internet connection. This driver is the Virtual
Com Port driver available on www.ftdichip.com.
2. Select Connect.
Software Connection
At startup, FlukeView 2 automatically tries to make a
connection with the Test Tool. An icon for the instrument
shows at the top of the window if the connection is successful
and the Test Tool is connected. See Figure 3, item A.
If you do not see the icon, this automatic connection is not
successful. Click Connect to make the connection with the
Tes t Too l.
1
2
ScopeMeter and Motor Drive Analyzer Software
Installation
5
Figure 2. 120B ScopeMeter Test Tool to PC Communication
1
2
125 B INDUSTRIAL SCOPEMETER 40 MHz
12
FlukeView® 2
Users Manual
6
Overview
FlukeView 2 software enables you to read data from the Test
Tool. Data is transferred from the Test Tool as a Measurement
Group that consists of one or more of these components:
Screen
This is bitmap data from the Test Tool screen in pixel-format
that you can print or copy to another program. You can
include the picture in documents and reports.
Waveform
This is sampled data with time information on the x-axis and
amplitude values on the y-axis. You can analyze this data in
more detail on the PC and copy it to another program as
tabular text (.csv file format) information.
Setup
This is binary data that represents all of the settings of the
Test Tool. You can send the Setup data back to the Test
Tool to put it in the same state as when the setup was
saved.
Main Window
The main window is an overview of all the Measurement
Groups since the start of the program and all items that have
been stored to the database. See Figure 3.
Each Measurement Group can have a screen, waveforms,
and a setup. Icons shown below the Measurement Group
indicate what is included. The icon is gray, if the data
component is not included.
The most recent Measurement Group shows on the top left
portion of the window. See Figure 3, item .
Tips:
Double-click on the Measurement Group or click
Analyze >Overview.
To select multiple groups, hold the Shift key or Ctrl key
and click.
Note
For touch screens, use the touch conventions that
correspond with mouse functions.
ScopeMeter and Motor Drive Analyzer Software
Main Window
7
Figure 3. FlukeView 2 Main Window
12
3
6
45
FlukeView® 2
Users Manual
8
Menu
Use the menu buttons on the left toolbar to access the
software functions. See Figure 3, item .
Table 1 is a list of the menu items and functions.
Table 1. FlukeView 2 Menu Functions
Menu Sub-menu Description
Home - - - Go to the main window.
Connect/
Disconnect - - - Connect/Disconnect the PC with the Test Tool. The label changes to show the current status.
Open
From Instrument Transfer the screen, waveform, and setup information from the Test Tool to the PC. For the Motor
Drive Analyzer, a report that consists of a number of screens can be transferred immediately.
From File Open a stored screen, waveform, and setup information from selected file.
Save
To Instrument Transfer the setup data to the Test Tool.
To Database Save the selected Measurement Groups to the database. When this data is stored to the database,
the information is retrieved easily with the Filter settings on the bottom of the main window.
To F i l e Save the selected Measurement Groups to a FlukeView 2 file, export a screen to a .bmp file, or export
waveform data to a .csv file.
Copy
Screen Copy screen information as a bitmap to the clipboard.
Waveform Copy waveform data as tabular text data to the clipboard.
ScopeMeter and Motor Drive Analyzer Software
Main Window
9
Print
Screen Print the screens of selected Measurement Group. The Additional Info and Description print as well.
Waveform Print the waveforms of the selected Measurement Group. Additional Info and Description prints as
well.
Report Print the selected screens. The Additional Info prints as the header. Description prints for each screen.
Analyze
Overview
Shows selected Measurement Groups in more detail and allows you to add Additional Info and
Description. Double-click on the waveform to select Analyze Waveform. Double-click on the screen to
see a larger screen display.
Waveform Shows selected waveforms of the Measurement Groups and allows you to zoom the data and show
the cursors on the waveform.
Log Readings Log the meter readings over time. The logged readings are stored in the same way as the waveform
data.
Configuration - - -
Change the language or color scheme.
To activate the change:
1. Select Save.
2. Restart the application.
Includes the option to clean up the internal database and compress the file size for faster operation.
Help
About Shows the version information for the software.
Manual Opens a PDF of the users manual.
Exit - - - Close the FlukeView 2 software.
Table 1. FlukeView 2 Menu Functions (cont.)
Menu Sub-menu Description
FlukeView® 2
Users Manual
10
Filter
On the bottom of the screen you can select a filter to limit the
amount of Measurement Groups that are visible in the main
window. See Figure 3, item .
Use Start and End to select the date range of the items that
show in the main window. See Figure 3, item .
Check the Unsaved Only option to show only the items that
are not yet saved to the database. See Figure 3, item .
The drop-down list on the left of the Filter settings allows you
to filter on Measurement groups with “Additional Info.” See
Figure 3, item .
As an example:
1. Select Company Name from the drop-down list.
2. In the field below the text, enter Enterprise.
This shows the Measurement groups with the text,
Enterprise, in the Additional Info field.
To edit the Additional Info field:
1. Click on the Edit Info button at the bottom of the screen.
2. Or, go to Analyze Overview and select Additional Info.
Basic Operation
The screen, waveform data, and setup show as a
Measurement Group in a small window on the main window.
To transfer the data as a Measurement Group from the Test
Tool to the PC:
1. Select Open > From Instrument.
2. Select Active.
To transfer Measurement Groups that are stored in the internal
memory of the Test Tool:
Note
Not supported with WiFi communication.
1. Select Open > From Instrument.
2. Select Saved.
To view a Measurement group in more detail:
1. Double click the Measurement Group or select Analyze
Overview.
You can add a description about the measurement for later
reference and printing:
1. Click on the small arrows next to Additional Information.
2. Type in a description to add information to the
measurement.
ScopeMeter and Motor Drive Analyzer Software
Basic Operation
11
Screens
To copy the screen as a bitmap to the clipboard, for example,
to paste into a report:
1. Select a Measurement Group.
2. Select Copy > Screen.
You can now paste from the clipboard into another
application.
To print screens from the selected Measurement Groups,
select Print > Screen. The selected screens print and include
Additional Information and Description.
To see a screen in more detail:
1. Double-click a Measurement Group in the main window.
2. Double-click the screen to open a larger view of the
screen.
Waveforms
To copy the waveform data as tabular text information to the
clipboard, for example, to paste into a spreadsheet:
1. Select a Measurement Group.
2. Select Copy > Waveform.
To see the waveform data in more detail:
1. Double-click the Measurement Group.
2. Double-click the waveform to see a larger view of the
waveform. Or, select Analyze Waveform.
3. Click and drag the axis that corresponds to a waveform to
move the waveform up and down.
To view cursor readings and waveform information:
1. Select the Cursor button in the Analyze Waveform window.
The Datablock on the right side shows waveform
information and the Cursor values section shows the
information about the cursor readings.
2. Click and drag to move the cursor.
When two waveforms show on the display, click the
waveform to select the waveform for the cursor readings.
FlukeView® 2
Users Manual
12
To zoom in on the waveform:
1. Select Zoom.
2. Click and drag with the mouse inside the graph or use the
controls on the horizontal scrollbar.
3. Click Zoom again to exit the zoom function.
To compare waveforms from two Measurement Groups:
1. In the main window, select two Measurement Groups.
2. Select Analyze > Waveform.
3. Select both Measurement Groups in the bottom of the
window.
The waveforms of both Measurement Groups are shown.
How to Work with Setups
A Setup is binary data that represents all of the settings of the
Test Tool. This data is not visible.
To configure the Test Tool in the same state as when the
Measurement Group was transferred, select
Save >To Instrument > Setup.
How to Work with Reports
For MDA models, you can create a Report on the Test Tool.
You can also save a collection of screens as a Report. The
name of the report needs to be entered once. For all
successive Save To Report selections, a bitmap of the screen
is added until the report is closed.
To open a report from the MDA model:
1. Select Open > From Instrument > Report.
2. Select the name of the Report in the dialog box with the
drop-down menu.
3. Click Start.
All report screens show on the Home screen and are
selectable. No waveform data or setup data is transferred.
Each measurement group consists of a screen only.
The title of all the screens is the report name as entered on the
Motor Drive Analyzer. The Description text shows the
measurement function.
You can save the report to a USB drive on the Motor Drive
Analyzer. This report is saved on the drive as a directory with
multiple .PNG files. The directory contains a .FVS file to use
as a method to select the report.
To open a report from a USB drive or other disk from the PC:
1. Select Open > From File.
ScopeMeter and Motor Drive Analyzer Software
Basic Operation
13
2. Select the report directory and then the .FVS file in that
directory.
All screens are selected after transfer from the Test Tool or
opening from the drive.
You can choose to print:
Select Print > Report.
Save to file:
Select Save > To File.
Save to database for later use in the FlukeView 2:
Select Save > To Database.
How to Work with 120B Recording
Use the WiFi on the 120B Test Tool to transfer a Meter or
Scope recording or store them on a micro SD card and then
open the recording in FlukeView 2.
To transfer a recording with WiFi:
1. Select Open > From Instrument > Recording.
2. Select the name of the recording in the dialog box with the
drop-down menu.
3. Click Start.
The recording can also be saved to a micro SD card on the
Fluke 124B or 125B.
The recording is saved on the drive as a directory with multiple
binary files. The directory also contains a .FVR file that can be
used a method to select the Recording.
To open a recording from a micro SD card or disk of the PC:
1. Select Open > From File.
2. Select the report directory and then the .FVR file in that
directory.
Save Data to File
To save Selected Measurement Groups to a file:
1. Select Save > To File.
2. Enter a name for the file in the File Name box.
3. Select .CSV to save only the waveform data to the file. Or,
select .BMP to save only the screen data to the file.
To save Measurement Groups to a database for easy access,
select Save > To Database. The Measurement Group is
saved to a database of measurements. With the database,
you can easily retrieve information. Use the Filter settings to
limit how many Measurement Groups show in the main
window.
FlukeView® 2
Users Manual
14
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fluke FlukeView 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fluke FlukeView 2 in de taal/talen: Engels als bijlage per email.

De handleiding is 1.13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info