764336
71
Verklein
Vergroot
Pagina terug
1/130
Pagina verder
Documenting Process Calibrator
Source Mode
59
Source Temperature with a Hart Scientific Drywell
The Product can source temperature using a Hart Scientific
Drywell. Many models are supported.
The drywell driver is able to talk to other drywells from Hart
Scientific, provided that they respond to Hart Scientific’s
standard serial interface commands.
Connect the Product to the drywell by plugging the drywell
interface cable into the pressure module connector as
shown in Figure 24. If the drywell has a DB9 connector, plug
the drywell interface cable directly into the drywell using the
DB9 Null Modem adapter. Drywells with the 3.5 mm jack
connector need to use the serial cable supplied with the
drywell in addition to the Product drywell interface cable.
Join the DB9 connectors of the two cables, and connect the
3.5 mm jack to the drywell.
Be sure the drywell is configured for serial communication at
2400, 4800, or 9600 bits per second. Other rates are not
supported by the Product.
To source a temperature with a drywell:
1. If necessary, push for SOURCE mode.
2. Push t to display the temperature mode menu.
3. Select Drywell from the list of options, and press .
4. The Product will begin to search for a drywell. If the
Product shows Attempting connection for more than
10 seconds, double check your cable connections and
drywell configuration.
5. If a dual well is recognized, a menu will pop up that
allows you to select a "hot" or "cold" side of the dual
well. Only one side of the drywell may be controlled at a
time. Switching sides requires the drywell to be
reconnected, by disconnecting the serial cable or by
leaving drywell source mode and selecting it again.
6. When the drywell is connected, the primary display will
show the actual temperature of the drywell, as
measured by the drywell internally. The drywell model
number will appear above the primary reading. The
setpoint for the drywell is displayed in the secondary
display, at the bottom of the screen. Initially, the
setpoint will be set to the value already stored in the
drywell.
7. Enter the temperature you wish to source and press
.
The settled indicator will be cleared when the actual
temperature is within one degree of the setpoint, and the
actual temperature is not changing quickly. Refer to the
drywell documentation for that model's recommendations for
stabilization time.
The upper temperature limit is restricted by the "High Limit"
setting stored in the drywell. If the Product will not set the
drywell to temperatures within the drywell spec, refer to the
drywell manual to check the "High Limit" setting.
71

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fluke 754 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fluke 754 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Fluke 754

Fluke 754 Gebruiksaanwijzing - Deutsch - 130 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info