764336
56
Verklein
Vergroot
Pagina terug
1/130
Pagina verder
753/754
Users Manual
44
Measure or Source with Custom Units
Warning
To avoid possible electric shock, when using
Custom Units for measurement, always see the
secondary value displayed below and to the
right of the main display for the actual value of
the measurement in native engineering units.
The measurement or source display can be setup to show
custom units. To do this, select a function, for example mV
dc, scale it as necessary, then record an alphanumeric
name for the custom units, for example, “PH.”
To set up a custom unit:
1. When you measure or source the necessary function,
push the Scale softkey, and then select Custom Units
from the list.
2. Record the 0% and 100% scale points for the input of
the transfer function.
3. Push the Custom Units softkey.
4. Record the 0% and 100% scale points for the output of
the transfer function.
5. Record the name of the custom units (up to four
characters), for example PH (for pH), using the
alphanumeric entry window, then push .
While Custom Units are active, shows on the display to
the right of the custom unit. Once the custom measurement
unit has been programmed, the unit is available for
calibration procedures in split-screen MEASURE/SOURCE
mode. To cancel Custom Units, push the Custom Units
softkey again.
Using the 700-IV Current Shunt
To source and measure current simultaneously, a current
shunt is necessary and uses the volts measure function.
The Fluke 700-IV Current Shunt is designed specifically for
use with the 700 Series Documenting Process Products.
To measure current with the current shunt:
1. Connect the current shunt to the MEASURE V jacks.
2. Connect the current signal to be measured to the
current shunt.
3. Push to select the dc voltage measure function.
4. Push the Scale softkey.
5. Select Current Shunt from the list.
6. Push .
7. The Product is automatically configured and uses the
correct custom scaling factor for the current shunt.
56

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fluke 754 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fluke 754 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Fluke 754

Fluke 754 Gebruiksaanwijzing - Deutsch - 130 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info