764229
3
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
417D/424D
Laser Distance Meters
Users Manual
September 2019 Rev. 2, 8/19 (English)
© 2012-2019 Fluke Corporation. All rights reserved.
Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is
three years and begins on the date of shipment. Parts, product repairs, and services are warranted for 90 days. This warranty extends only to
the original buyer or end-user customer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product
which, in Fluke's opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation
or handling. Fluke warrants that software will operate substantially in accordance with its functional specifications for 90 days and that it has
been properly recorded on non-defective media. Fluke does not warrant that software will be error free or operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but have no authority to extend
a greater or different warranty on behalf of Fluke. Warranty support is available only if product is purchased through a Fluke authorized sales
outlet or Buyer has paid the applicable international price. Fluke reserves the right to invoice Buyer for importation costs of repair/replacement
parts when product purchased in one country is submitted for repair in another country.
Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or replacement of a defective
product which is returned to a Fluke authorized service center within the warranty period.
To obtain warranty service, contact your nearest Fluke authorized service center to obtain return authorization information, then send the
product to that service center, with a description of the difficulty, postage and insurance prepaid (FOB Destination). Fluke assumes no risk for
damage in transit. Following warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke
determines that failure was caused by neglect, misuse, contamination, alteration, accident, or abnormal condition of operation or handling,
including overvoltage failures caused by use outside the product’s specified rating, or normal wear and tear of mechanical components, Fluke
will provide an estimate of repair costs and obtain authorization before commencing the work. Following repair, the product will be returned to
the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation charges (FOB Shipping Point).
THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR
LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.
Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental
or consequential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this
Warranty is held invalid or unenforceable by a court or other decision-maker of competent jurisdiction, such holding will not
affect the validity or enforceability of any other provision.
11/99
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
ООО «Флюк СИАЙЭС»
125167, г. Москва,
Ленинградский проспект дом 37,
корпус 9, подъезд 4, 1 этаж
LIMITED WARRANTY AND LIMITATION OF LIABILITY
ii
Table of Contents
Title Page
Introduction....................................................................................................................... 1
How to Contact Fluke ....................................................................................................... 1
Safety Information............................................................................................................. 1
Product Familiarization ..................................................................................................... 2
Features.................................................................................................................... 2
Before You Start ....................................................................................................... 2
Multifunction Endpiece...................................................................................... 3
Display .............................................................................................................. 4
Keypad.............................................................................................................. 6
Measurements with a Tripod............................................................................. 8
Reference Point ................................................................................................ 8
Functions .......................................................................................................................... 9
Units of Measurement............................................................................................... 9
Backlight ................................................................................................................... 9
Keypad Lock ............................................................................................................. 9
Memory..................................................................................................................... 9
Addition/Subtraction.................................................................................................. 9
Compass................................................................................................................... 10
Compass Calibration......................................................................................... 10
Magnetic Declination......................................................................................... 10
Timer......................................................................................................................... 12
Beeper ...................................................................................................................... 12
Measurements.................................................................................................................. 12
Single Distance Measurement.................................................................................. 12
Continuous Measurement......................................................................................... 12
Minimum/Maximum Tracking.................................................................................... 13
Area .......................................................................................................................... 13
417D/424D
Users Manual
ii
417D................................................................................................................. 13
424D................................................................................................................. 13
Volume ..................................................................................................................... 14
Tilt............................................................................................................................. 14
Smart Horizontal Mode..................................................................................... 14
Height Tracking ................................................................................................ 15
Leveling ............................................................................................................ 15
Tilt Sensor Calibration ...................................................................................... 16
Stake Out Measurement .......................................................................................... 16
Corner Angle Measurement ..................................................................................... 17
Indirect Measurement............................................................................................... 18
Maintenance.....................................................................................................................20
Clean the Product..................................................................................................... 20
Batteries ................................................................................................................... 20
Information or Error codes ............................................................................................... 21
Specifications................................................................................................................... 22
1
Introduction
The Fluke 417D and 424D Laser Distance Meters (Meter or
Product) are professional-grade laser distance meters. Use these
Meters to quickly and accurately get the distance to a target, the
area, and the volume measurements.
This Meter is better than an ultrasonic device because it uses
laser light waves and measures their reflection. The Meter
includes:
Most advanced technology for distance measurements
More accurate measurement
Longer measurement distance – model dependent
How to Contact Fluke
To contact Fluke, call one of the following telephone numbers:
Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-6714-3114
Singapore: +65-6799-5566
China: +86-400-921-0835
Brazil: +55-11-3530-8901
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To view, print, or download the latest manual or manual
supplement, visit http://us.fluke.com/usen/support/manuals.
To request a printed manual, visit www.fluke.com/productinfo.
Safety Information
General Safety Information is in the printed Safety Information
document that ships with the Product and at www.fluke.com.
More specific safety information is listed where applicable.
A Warning identifies hazardous conditions and procedures that
are dangerous to the user. A Caution identifies conditions and
procedures that can cause damage to the Product or the
equipment under test.
417D/424D
Users Manual
2
Product Familiarization
The manual explains features for multiple models. Because
models have different features, not all of the information in the
manual may apply to your Product.
Features
Table 1 lists the features of the Product.
Before You Start
This section has basic information about the Meter.
Table 1. Features
Feature 417D 424D
Handstrap 
Multifunction endpiece
Display lines 2 4
Backlight 
Keypad illumination
Keypad lock
Memory
Compass
Distance Measurement 
Continuous measurement
without min/max tracking
with min/max tracking
Area 
Volume
Tilt (Smart horizontal mode,
height tracking, leveling)
Stake Out
Triangular area
Pythagoras calculations
Room corner angle
Add/Subtract
Tripod measurement
Timer
Beeper
Table 1. Features (cont.)
Feature 417D 424D
Laser Distance Meters
Product Familiarization
3
Multifunction Endpiece
Use the multifunctional endpiece to adapt to multiple
measurement situations. A built-in sensor automatically senses
the orientation of the endpiece and adjusts the zero point. See
Figure 1.
For measurements from an edge, fold out the endpiece
(90 °) until it locks into place. See Figure 2.
For measurements from a corner, fold out the endpiece
(90 °) until it locks into place. Push the endpiece lightly to the
right side to fold it out fully. See Figures 1 and 3.
Figure 1. Multifunction Endpiece
Figure 2. Edge Measurements
Figure 3. Corner Measurements
1
2
417D/424D
Users Manual
4
Display
Table 2 shows the readout location on the display for each
function of the 417D.
Table 3 shows the readout location on the display for each
function of the 424D.
Table 2. Display 417D
Item Description
Area
Battery Status
Laser Indication
DMeasurement Reference
EPrevious Measurement
FMeasurement (Error code will also display here.)
2
34
1
5
6
Laser Distance Meters
Product Familiarization
5
.
Table 3. Display 424D
Item Description Item Description Item Description
Battery Status HInformation OTriangle Area
Compass / Timer readout IMin/Max Measurement PIndirect Height
Memory JMeasurement Reference QCeiling Area
DAdditional Measurements /
Status KStake out RSlope Distance
EMeasurement LLeveling SWall Area
F2nd Result Available MArea/Volume TTilt Angle
GAddition Subtraction NPythagoras UCircumference
1211 13 14
15
16
19
17
18
20
21
10
1
5
6
4
2
3
8
7
9
417D/424D
Users Manual
6
Keypad
Table 4 shows the buttons on the keypad on the 417D. Table 6
shows the keypad of the 424D.
Table 4. Keypad 417D
Item Description
On/Measure
Area/Units
Clear/Off
1
2
3
Table 5. 417D Button Operation
Button Pushes Function
>
1x Turn on the Product and laser.
(The battery symbol shows by
default.)
2x Take a measurement.
2 seconds Continuous measurement mode.
To cancel, push again.
=1x Start an area measurement.
2 seconds Select units of measure (see
Table 8).
<1x Clear last measurement.
2 seconds Turn off the Product.
Laser Distance Meters
Product Familiarization
7
Table 6. Keypad 424D
Item Description
On/Measure
Minus
Area/Volume
DTilt
ETimer
FCompass
GMemory
HClear/Off
IReference/Units
JTriangle
KIndirect
Measurement
LPlus
Table 7. 424D Button Operation
Button Pushes Function
1x Turn on the laser.
2x Take a measurement.
2 seconds Turn on tracking (min/max
measurement).
2 seconds
(from off) Turn on Continuous Laser.
1
12
2
3
4
6
7
8
9
10
11
5
1x Start area measurement.
2x Start volume measurement.
2 seconds View 2nd Results.
1x Turn on Smart Horizontal Mode.
2x Turn on Height Tracking.
3x Turn on Leveling.
1x Arrow points in north direction.
2 seconds
Arrow points in direction of Laser
beam and display shows the
direction in degrees and an alpha
symbol.
1x Clear last value.
2x Clear all
2 seconds Turn off Meter.
1x Turn on Room Corner Angle
(Triangular Area)
2 seconds View 2nd Results.
1x Pythagoras 1
2x Pythagoras 2
3x Pythagoras 3
4x Stake Out (2 values)
Table 7. 424D Button Operation (cont.)
Button Pushes Function
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fluke 417D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fluke 417D in de taal/talen: Engels als bijlage per email.

De handleiding is 6,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Fluke 417D

Fluke 417D Gebruiksaanwijzing - Nederlands - 28 pagina's

Fluke 417D Gebruiksaanwijzing - Deutsch - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info