775836
45
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
3 Phase Power Quality Analyzer
Basic Setup
39
Communication Settings
These setting relate to communications with the Anaylzer.
Ethernet. The instrument address can be set automatically or manually. The default setting is
Automatic when you select Ethernet from the settings list. For Manual setting, deselect
Ethernet and set the inputs for IP Address, Netmask, Gateway, and DNS.
Note
Only change these settings if you have the required networking knowledge.
A check box allows you to turn off the option for all wireless interfaces when required in
sensitive locations.
WiFi client. This setting directly connects the Anaylzer to the local WiFi network and allows
access to the Anaylzer from any location within the WiFi network. When the WiFi client is off,
the available network access points appear in a list in screen. The network password is
required to connect to the local network. Select the network and enter the password with the
on-screen keyboard. It is not possible to enter a username and password.
WiFi Access Point. The Anaylzer can be set as a WiFi Access point and creates its own WiFi
network that a device can connect to. This can be used to download data from the Anaylzer
with Fluke Energy Analyze software or for control with a Virtual Network Computer. See
Remote Display.
The WiFi direct connection uses WPA2-PSK (pre-shared key) with AES encryption. The
passphrase shown on the screen is required to establish a connection from a client to the
device.
To s e t u p :
1. On the client, go to the list of available WiFi networks and look for the network name:
Fluke177x<serial-no>
For example: Fluke1777<123456789>
2. At the prompt, enter the passphrase provided on the WiFi Configuration screen.
Depending on the operating system of the client, the passphrase is also called Security
Key, Password, or similar.
After a few seconds the connection is established.
Note
On the PC, the WiFi icon in the notification area of the task bar shows (the icon varies
for the Windows version). The icon indicates that this WiFi interface does not provide
an Internet access. This is normal since the Analyzer is not a gateway to the Internet.
45

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fluke 1777 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fluke 1777 in de taal/talen: Engels als bijlage per email.

De handleiding is 3.36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info