539572
63
Verklein
Vergroot
Pagina terug
1/70
Pagina verder
GB
- 65 -
7.3 Switching off the engine
Emergency Stop procedure:
If it becomes necessary to stop the equipment
immediately, set the On/Off switch (9) to “Stop”
or “0”.
Normal procedure:
Let go of the throttle lever (11) and wait until the
engine has changed to idling speed. Then set the
On/Off switch (9) to “Stop” or “0”.
7.4 Practical tips
Practice all the work steps with the engine swit-
ched off before you start to use the equipment.
Warning! Take extreme care during mowing
work. When doing such work keep a distance of
30 meters between yourself and other people or
animals.
Extending the cutting line
Warning! Do not use any kind of metal wire or
metal wire encased in plastic in the line spool. This
may cause serious injuries to the user.
To extend the cutting line (13), run the engine at
full speed and tap the line spool on the ground.
This will automatically extend the line. The blade
on the guard hood will cut the line to the permissi-
ble length (Fig. 9b).
Important: Remove all grass and weed rem-
nants at regular intervals to prevent the equipment
from overheating.
Grass and weed remnants become trapped under
the guard hood (Fig. 9c) and prevent the equip-
ment from cooling suffi ciently. Remove the rem-
nants carefully using a screwdriver or the like.
Different cutting methods
When the equipment is correctly assembled it will
cut weeds and long grass in places which are dif-
cult to access, e.g. along fences, walls and foun-
dations and also around trees. It can also be used
for „mowing“ down vegetation so that a garden
can be better prepared or a certain area cleared
down to the soil.
Please note: Even if it is used carefully, cutting
around foundations, stone or concrete walls, etc.
will result in the line suffering more than the nor-
mal level of wear.
Trimming/mowing (with line spool/cut-
ting blade)
Swing the equipment from side to side in a
scything motion. Always keep the cutting tool par-
allel to the ground.
Check the site and decide which cutting height
you require. Guide and hold the cutting tool at
the required height to ensure that you cut evenly
(Fig. 9d).
Low trimming (with line spool)
Hold the equipment right in front of you at a slight
angle so that the underside of the line spool is
above the ground and the line strikes the correct
target. Always cut away from yourself. Never
draw the equipment towards yourself.
Cutting along fences/foundations (with
line spool)
Approach wire mesh fences, lath fences, natural
stone walls and foundations slowly so that you
can cut close to them without striking the obstac-
le with the line. If, for example, the line strikes
stones, stone walls or foundations, it will wear or
fray. If the line strikes wire fencing, it will break.
Trimming around trees (with line spool)
When trimming around tree trunks, approach
slowly so that the line does not strike the bark.
Walk around the tree and take care not to dama-
ge the tree. Approach grass or weeds with the tip
of the line and tilt the line spool forwards slightly.
Mowing down to the ground (with line
spool)
When mowing down to the ground you will cut all
the vegetation. To do this, set the line spool at an
angle of 30° to the right. Place the handle in the
required position (Fig. 9e).
Caution! Increased risk of injury to the user,
bystanders and animals, and increased risk of
damaging property due to objects (e.g. stones)
being catapulted away.
Anleitung_3401991_LB2.indb 65Anleitung_3401991_LB2.indb 65 24.02.12 14:0924.02.12 14:09
63

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Florabest FBS 43 A1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Florabest FBS 43 A1 in de taal/talen: Nederlands, Duits, Frans als bijlage per email.

De handleiding is 3,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info