--EMF (electro-magnetic fields) from arc welders, induction heaters.
--Thermal shock (caused by large or abrupt ambient temperature changes, allow 1 hours for unit to
stabilize before use).
--Do not leave the unit on or near high temperature objects.
Warning:
Do not point laser at eye either directly or indirectly off reflective surfaces.
THIS THERMOMETER IS INTENDED FOR PERSONAL USE ONLY!
NOT FOR PROFESSIONAL USE!
Make sure to get precise measurements to follow below tips：
• Point brow center vertically, distance 2-8cm, press ON button to get instant readings.
• Make sure the front head is clear and clean before measuring (no sweat or dirt)
• Keep the thermometer in a testing environment for at least 30 minutes before measurement,
or even longer when environment temperature changes.
• Keep away from airflow outlet of fan and air conditioner when measuring.
• Do not use it under strong direct sunlight.
• Repeat measurement is necessary to get the best and most precise result.
• Correctly choose “BODY” or “OBJECT” mode.
• Try ear measuring if forehead measurement is not accuracy.
Battery installation and replacement:
1. After the battery cover is opened, place the battery in the direction of positive and negative
electrodes, pay attention to the positive and negative direction to be placed correctly.
2. After the first use or the new battery is put in, wait for 10 minutes to warm up.
3. When the battery power is insufficient, the symbol will appear on the display screen, prompt to
replace the new battery, open the battery cover(see product structure) when replacing the new battery ,
pay attention to the positive and negative polarity. Misplacement may cause damage to the product.
4. When not in use for a long time, please take out the battery to extend the service life and prevent
damage to the thermometer caused by battery leakage.
Keep the batteries away from fire, high temperature and humid environments.
