FLINQ
HANDMADE
ROPE LAMP 1 METER
FQC8148
1MT Rope Light
Dear Customer, before use please read this manual carefully and follow the
instructions as provided. Keep these instructions for later use.
Step 1: Check if all parts are included (as the picture) and prepare a screwdriver,
wire cutter, drill and scissors (if needed). Cut of the plastic insulation 6-8mm from
the power wire to see the metal wire’s inside.
Step 2: Install the mounting bracket to the ceiling with the plug’s and screws and
mark it on the preferred location.
Step 3,4 and 5: Put the wires thru the hole from the black top cover and add the
ground wire with the connection part in the middle of the metal screw fixations so
it is earthed well. Then add the white separate Thule around the wire’s for
protection and insulation.
Step 6: Switch off the main power and connect the 3 wire’s with the terminal
block that’s included. Brown (live wire +) to the L connection by pressing the
button’s and release when connected well. Do the same for Blue (neutral wire -)
to the N connection and Yellow/Green (earth wire) to the earth connection. Now
fix the black top cover to the mounting bracket and install tightly with the screws.
Turn ON the main power and switch the light ON.
HEMP LIGHT
