2
Putting on your Fitbit Flex 2
Your Flex 2 comes with a large and a small wristband. If you want to use the large
wristband you’ll need to move the clasp from the small wristband.
If you need help inserting the tracker into an accessory such as a pendant, see
help.fitbit.com.
Moving the clasp from the small to large wristband
If you choose to wear the large wristband, you’ll need to remove the clasp from the
small wristband and put it into the large wristband:
1.! Push the clasp out from the inside of the wristband. You may find it helpful to
first remove the square peg, followed by the round peg.
2.! Pull out the clasp.
3.! Insert the clasp into another wristband by lining up the square peg with the
square hole and the round peg with the round hole and pressing firmly until
both pegs are completely through the holes and snap into place.
NOTE:
You may need to wiggle the pegs back and forth to get them to snap into
place.
If there is a bulge on the inside of the band between the two inside prongs of
the clasp, find a small object like a credit card to push it flat.
Inserting the tracker into the wristband
Hold the tracker in your hand with the back of the tracker facing up. Find the dot on
the back of the tracker. Insert this end into the side of the wristband that has a
corresponding dot.