795166

First Alert 1039102 - Onelink Handleiding

14
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
User’s Manual
Important! Please Read Carefully And Save This Document. This User’s Manual
contains important information about your combination smoke and CO alarm’s operation. If you are
installing this alarm for use by others, you must leave this manual (or a copy of it) with the end user.
NOTE: See Safe & Sound ID
and Pairing Code Label on
back cover of User’s Manual.
2
User’s Manual Model: 1039102
Installed On
Replace By
3
Table of Contents
Welcome 4 - 5
Parts of This Alarm 5
Smoke & Carbon Monoxide Alarm 6
Where to Install 7
Where Not to Install 8
Setup and Installation 9 - 13
When the Alarm Sounds 14
Using the Silence Feature 15
Factory Reset 15
Weekly Testing 16
Regular Maintenance 17
Alarm End of Life 17
Ionization and Photoelectric Technology 18
Fire Safety Tips 18 - 19
What You Need to Know About CO 20
Potential Sources of CO in the Home 21 - 22
Regulatory Information 23 - 25
Special Compliance 26 - 27
General Limitations 27 - 28
Troubleshooting Guide 29
Limited Warranty 30
Copyright and Technical Specifications 31
4
Welcome
Welcome to your Onelink Safe & Sound alarm. Thank you for choosing Onelink by First
Alert for your safety needs. In addition to the alarm sounds, you can receive notifications
in case of an emergency to help provide a warning of a fire or carbon monoxide while you
are home or away. Please take time to read this manual and make this alarm an integral
part of your family’s safety plan. Visit onelink.firstalert.com for additional information.
Amazon Alexa
Contents
Alexa is built in the cloud, so it is always getting smarter. The more you use Alexa,
the more Alexa adapts to your speech patterns, vocabulary, and preferences with
new features continually being added. Ask Alexa to answer questions, play music,
hear the news, get weather and trac reports, control your smart home, and more.
Onelink Safe & Sound Mounting Bracket Power Connector / Adapter Plugs
Get Started
with Alexa
“Alexa, what’s in
the news?”
Junction Box Screws User’s Manual Alexa Quick Start Guide
5
Parts of this Alarm
System Requirements
Wireless Network Android or iOS Device Onelink Home App
Required to use a 2.4 GHz wireless
connection and a compatible
802.11 b/g/n/ac router.
You can use your Onelink Safe
& Sound with Android 5 or later
and with iOS 10 or later.
Search and download the
Onelink Home app from the
App Store or Google Play.
1. Speaker
2. Color Indicator Ring
3. Test/Silence Button
(on the side of the product)
4. Hot (black) AC Wire
5. Neutral (white)
AC Wire
6. Interconnect
(orange) AC Wire
7. Quick Connect
Power Connector
8. Mounting Bracket
9. Mounting Slots
10. Turn Alarm Clockwise
on Bracket to Attach
11. Turn Alarm Counter
Clockwise to Remove
from Bracket
8
9
11
10
45
6
7
1
2
3
6
Smoke & Carbon Monoxide Alarm
LED Color
Patterns Smoke / CO Events Voice Guide
Power Up Power Up
Programming, Silencing & Pairing “[Location, example: “Hallway”] Location saved.”
Testing
“The testing is complete.”
[Test Complete - interchanging to next test/Safe & Sound out of
alarm mode]
Welcome
Hello and welcome to your Onelink Safe & Sound. Download
the Onelink Home App through the App Store or Google
Play. The app will walk you through the process.
Power Indicator and Night Light N/A
Pairing N/A
Testing “This is only a test. The alarm will sound and for your protection
is very loud. The test will start in 5 seconds. 5...4...3...2...1.”
Power Indicator when
Night Light is Off N/A
Testing
“Testing smoke” [beep beep beep!]
“Testing carbon monoxide” [beep beep beep beep!]
“Evacuate, evacuate, there’s fire in the [Location]!”
“Highest carbon monoxide level was 0 PPM.”
Emergency
“Evacuate! Evacuate! There is smoke [or
carbon monoxide] in the [Location!]!”
“Highest carbon monoxide level was [Number] PPM.”
Malfunction
“Error, please see users manual or contact customer service.”
“Alarm has reached its end of life. Replace your alarm.”
Low Battery N/A
Main Alexa Color Patterns For When You Are Using Alexa On Your Safe & Sound
Solid Blue with Cyan
Alexa is busy processing your request.
The device is starting up.
Half Red Mute: You have turned off the microphones on your device [tone].
*Note: Two (2) LEDs will remain red while the device is muted.
7
Where to Install
Minimum coverage for smoke alarms, as recommended by the National Fire Protection Association (NFPA), is one smoke alarm on
every level, and in every bedroom (See “Regulatory Information For Smoke Alarms” for details on the NFPA recommendations).
For CO alarms, the National Fire Protection Association (NFPA) recommends that CO alarms be installed on every level
and in the central location outside each bedroom. For added protection, install additional CO alarms in every bedroom.
NOTE: For added protection, install an additional smoke/CO alarm at least 20 feet (6 meters) away from the furnace
or fuel burning heat source where possible. In smaller homes or in manufactured homes where this distance cannot
be maintained, install the alarm as far away as possible from the furnace or other fuel burning source. Installing the
alarm closer than 20 feet (6 meters) will not harm the alarm, but may increase the frequency of unwanted alarms.
In General, Install Combination Smoke and Carbon Monoxide Alarms:
• On every level of your home, including finished attics and basements.
• Inside every bedroom, especially if people sleep with the door partly or completely closed.
• In the hall near every sleeping area. If your home has multiple sleeping areas, install a unit
in each. If a hall is more than 40 feet (12 meters) long, install a unit at each end.
• At the top of first-to-second floor stairs.
• At the bottom of the basement stairs.
• For additional coverage, install alarms in all rooms, halls, and storage areas, where
temperatures normally remain between 40˚ F and 100˚ F (4.4˚ C and 37.8˚ C).
Recommended Placement
• Ceiling installation only: Place the alarm
as close to the center as possible.
• See Avoiding “Dead Air” Spaces
for more information.
NOTE: For any location, make sure no door
or other obstruction could keep carbon
monoxide or smoke from reaching the alarm.
PLACE HERE
DO NOT PLACE
IN THIS AREA
CEILING
4
"
(102 mm)
minimum
*For ceiling installation only.
8
Where Not to Install
Do Not Place Your Smoke & CO Alarm:
• In garages, furnace rooms, crawl spaces and unfinished attics. Avoid extremely dusty, dirty or greasy areas.
• Where combustion particles are produced. Combustion particles form when something burns. Areas
to avoid include poorly ventilated kitchens, garages, and furnace rooms. Keep units at least 20 feet (6
meters) from the sources of combustion particles (stove, furnace, water heater, space heater) if possible.
In areas where a 20 foot (6 meter) distance is not possible – in modular, mobile, or smaller homes, for
example – it is recommended the smoke alarm be placed as far from these fuel-burning sources as
possible. The placement recommendations are intended to keep these alarms at a reasonable distance
from a fuel-burning source, and thus reduce “unwanted” alarms. Unwanted alarms can occur if a smoke
alarm is placed directly next to a fuel-burning source. Ventilate these areas as much as possible.
• Within 5 feet (1.5 meters) of any cooking appliance. In air streams near kitchens. Air currents
can draw cooking smoke into the smoke sensor and cause unwanted alarms.
• In extremely humid areas. This alarm should be at least 10 feet (3 meters) from a shower, sauna,
humidifier, vaporizer, dishwasher, laundry room, utility room, or other source of high humidity.
• In direct sunlight.
• In turbulent air, near ceiling fans or open windows. Blowing air may prevent CO/smoke from reaching the sensors.
• In areas where temperature is colder than 40˚ F (4.4˚C) or hotter than 100˚ F (37.8˚C). These areas include non
air conditioned crawl spaces, unfinished attics, uninsulated or poorly insulated ceilings, porches, and garages.
• In insect infested areas. Insects can clog the openings to sensing chamber.
• Less than 12 inches (305 mm) away from fluorescent lights. Electrical “noise” can interfere with the sensor.
• In “dead air” spaces. See below for additional information.
• On walls.
9
Setup & Installation
~
DANGER: ELECTRICAL SHOCK HAZARD. Turn o power to the area where
you will install this unit at the circuit breaker or fuse box before beginning installation. Failure to
turn o the power before installation may result in serious electrical shock, injury or death.
!
WARNING: Make sure the alarm is not receiving excessively noisy power. Examples of noisy power
could be major appliances on the same circuit, power from a generator or solar power, light dimmer on the
same circuit or mounted near fluorescent lighting. Excessively noisy power may cause damage to your alarm.
!
WARNING: Installation of this unit must conform to the electrical codes in your area; Article
760 of NFPA 70 (NEC), NFPA 72, NFPA 101; SBC (SBCCI); UBC (ICBO); NBC (BOCA); OTFDC
(CABO), and any other local or building codes that may apply. Wiring and installation must be
performed by a licensed electrician. Failure to follow these guidelines may result in injury or
property damage. This unit must be powered by a 24-hour, 120VAC pure sine wave 60Hz circuit.
Be sure the circuit cannot be turned o by a switch, dimmer, or ground fault circuit interrupter.
Failure to connect this unit to a 24-hour circuit may prevent it from providing constant protection.
Tools You Will Need:
• Needle-nose pliers or utility knife • Wire strippers
• Standard phillips screwdriver • Ladder
Before you begin, ensure the Android device is updated to 5 or later and iOS device is updated to iOS 10.0 or later, then
download the free Onelink Home App from the App Store or Google Play and follow the installation and setup instructions.
NOTE: You must enable iCloud Keychain to use Onelink Safe & Sound on an iOS device. On your iOS device, tap
Settings > [your name] > iCloud, tap Keychain and slide to turn on iCloud Keychain, follow onscreen instructions.
This smoke/CO alarm is designed to be mounted on any standard wiring junction box up to a 4-inch (10 cm)
size, on the ceiling. Read “Where to Install” and “Where Not to Install” before you begin installation.
10
Setup & Installation (Continued)
Installing the Mounting Bracket
Step 1 Turn o power.
Step 2 Remove existing alarm and mounting bracket (if necessary).
Step 3 Attach the Onelink mounting bracket to the junction box.
Stand-Alone Alarm Only:
• Connect the white wire on the power connector to the neutral wire in the junction box.
• Connect the black wire on the power connector to the hot wire in the junction box.
• Tuck the orange wire inside the junction box. It is used for interconnect only.
NOTE: Visit www.firstalert.com/product/safe-sound to view alarms compatible with Onelink Safe & Sound.
Strip o about 1/2" (12 mm) of the plastic coating on the orange wire on the power connector.
• Connect the white wire on the power connector to the neutral wire in the junction box.
• Connect the black wire on the power connector to the hot wire in the junction box.
• Connect the orange wire on the power connector to the interconnect wire in the junction box.
Repeat for each unit you are interconnecting. Never connect the hot or neutral wires in the junction
box to the orange interconnect wire. Never cross hot and neutral wires between alarms.
Interconnected Units Only:
!
WARNING: Improper wiring of the power connector or the wiring leading to the
power connector will cause damage to the alarm and may lead to a non-functioning alarm.
11
If replacing an existing First Alert alarm and the power connector is in good working condition skip to the
“Installing Onelink Safe & Sound” instructions.
Step 1 Using wire nuts, connect the white wire on the power connector to the neutral wire in
the junction box, connect the black wire on the power connector to the hot wire in the
junction box, connect the orange wire on the power connector to the interconnect wire
in the junction box, you will need to splice the orange casing o before connecting.
Step 2 Move to the “Installing Onelink Safe & Sound” instructions.
If installing the First Alert power connector:
Setup & Installation (Continued)
Installing Power Connectors
Step 1 Connect the black end of the appropriate adapter plug supplied
with the unit to the existing power connector.
NOTE: There may not be enough room for the Adapter Plug and additional wiring to fit in the junction box.
If not, the old power connector must be removed and replaced with the First Alert Power Connector.
Step 2 Move to the “Installing Onelink Safe & Sound” instructions.
If replacing a non-First Alert alarm use one of the other adapters supplied
with the unit:
12
~
DANGER: If any unit in the series does not alarm, TURN OFF POWER and recheck connections.
RESTORE POWER. If any unit within interconnected alarms does not alarm, replace it immediately.
Stand-Alone Alarm Only:
• If you are only installing one smoke alarm, restore power to the junction box.
Interconnected Units Only:
• If you are interconnecting multiple smoke alarms, repeat steps 1-5 for each smoke alarm in the series.
When you are finished, restore power to the junction box.
Step 1 Connect the power connector to the First Alert® alarm.
Step 2 Check all connections. Make sure all plugs are completely connected and snapped together.
Ensure the Adapter Plug is securely connected to the existing Power Connector.
NOTE: If you need to remove the power connector, turn POWER OFF first. Insert a flat screwdriver blade between the
power connector and the security tab inside the power input block. Gently pry back the tab and pull the connector free.
Step 3 Line up the tabs on the unit with the notches on the mounting bracket.
Step 4 Install the base of the alarm to the mounting bracket, apply firm pressure, and turn clockwise
until a single, non-repeating audible chirp is heard.
Step 5 Restore power to the junction box.
NOTE: After you activate the alarm for the first time, the Color Indicator Ring will power up and the alarm
will welcome you. To program your alarm, follow the instructions provided in the Onelink Home App.
Step 6 Test each alarm. Press and hold the test button until the unit alarms. When testing a series of interconnected
units you must test each unit individually. Make sure all units alarm when each one is tested.
NOTE: Removing the alarm from the mounting bracket will turn the alarm o.
Setup & Installation (Continued)
Installing Onelink Safe & Sound
!
IM P ORTANT: If your alarm is not fully axed to the mounting bracket the alarm will produce
a repeating audible chirp.
Visit www.firstalert.com/product/safe-sound to view alarms compatible with Onelink Safe & Sound.
Interconnected Units Must Meet All of the Following Requirements:
• A maximum of 12 compatible units may be interconnected (Maximum of 12 smoke alarms).
• The same fuse or circuit breaker must power all interconnected units.
• The total length of wire interconnecting the units should be less than 1000 feet (300 meters).
This type of wire is commonly available at Hardware and Electrical Supply stores.
• All wiring must conform to all local electrical codes and NFPA 70 (NEC). Refer to NFPA 72,
NFPA 101, and/or your local building code for further connection requirements.
13
6
7
8
1 1
2
3 3
4 4
5 5
Setup & Installation (Continued)
1. Smoke/CO Alarm 5. Junction Box
2. Ceiling 6. Neutral Wire (white)
3. Power Connector 7. Interconnect Wire (orange)
4. Wire Nut 8. Hot Wire (black)
!
WARNING: Android and iOS device notifications require a functional Wireless connection. It is required
to use with a 2.4 GHz wireless connection and a compatible 802.11 b/g/n/ac router. The notifications are only
as reliable as your Wireless network and are not a substitute for a third party emergency monitoring service.
!
IM P ORTANT: Interconnect units within a single family residence only. Otherwise all households
will experience unwanted alarms when you test any unit in the series. Interconnected units will
only work if they are wired to compatible units and all requirements are met. This unit is designed
to be compatible with most First Alert® and BRK Electronics® Models listed in the User’s Manual.
!
WARNING: Failure to meet any of the above requirements could damage the units and cause
them to malfunction, removing your protection. AC and AC/DC alarms can be interconnected. Under
AC power, all units will alarm when one senses smoke. When power is interrupted, only the AC/DC
units in the series will continue to send and receive signals. AC powered alarms will not operate.
14
NOTE: A qualified appliance technician is defined as “a person, firm, corporation, or company that
either in person or through a representative, is engaged in and responsible for the installation, testing,
servicing, or replacement of heating, ventilation, air conditioning (HVAC) equipment, combustion
appliances and equipment, and/or gas fireplaces or other decorative combustion equipment.”
When the Alarm Sounds
What to Do If Your Smoke Alarm Sounds
• If the unit alarms and you are not testing the unit, it is warning you of a potentially dangerous situation that
requires your immediate attention. NEVER ignore any alarm. Ignoring the alarm may result in injury or death.
• If the unit alarms get everyone out of the house immediately.
What to Do in Case of a Fire
• Don’t panic; stay calm. Follow your family escape plan.
• Get out of the house as quickly as possible. Don’t stop to get dressed or collect anything.
• Feel doors with the back of your hand before opening them. If a door is cool, open it slowly. Don’t
open a hot door. Keep doors and windows closed, unless you must escape through them.
• Cover your nose and mouth with a cloth (preferably damp). Take short, shallow breaths.
• Meet at your planned meeting place outside your home, and do a head count to make sure everybody got
out safely. Call the Fire Department as soon as possible from outside. Give your address, then your name.
• Never go back inside a burning building for any reason.
• Contact your Fire Department for ideas on making your home safer.
What to Do if the CO Alarm Sounds
1. Press the Test/Silence button (On App or on unit).
2. Call your emergency services, Fire Department or 911.
3. Immediately move to fresh air—outdoors or by an open door or window. Do a head count to check that all persons
are accounted for. Do not re-enter the premises, or move away from the open door or window until the emergency
services responder has arrived, the premises have been aired out, and your CO alarm remains in its normal condition.
4. After following steps 1-3, if your CO alarm reactivates within a 24-hour period, repeat steps 1-3 and call a qualified
appliance technician to investigate for sources of CO from fuel-burning equipment and appliances, and inspect for
proper operation of this equipment. If problems are identified during this inspection have the equipment serviced
immediately. Note any combustion equipment not inspected by the technician, and consult the manufacturers’
instructions, or contact the manufacturers directly, for more information about CO safety and this equipment. Make
sure that motor vehicles are not, and have not, been operating in an attached garage or adjacent to the residence.
15
The Alarm Silence Feature
This feature is intended to temporarily silence the horn while you identify and correct the problem. Do not
use the Silence Feature in emergency situations. It will not correct a CO problem or extinguish a fire. The
Silence Feature can temporarily quiet an unwanted alarm for several minutes. You can silence this smoke/
CO alarm by pressing the Test/Silence button on the side of alarm for at least 3-5 seconds or via the Onelink
Home App. After the Test/Silence button is released, the Red LED stops during the silence mode.
Silence the End of Life Signal
This silence feature can temporarily quiet the End of Life warning “chirp” for up to 2 days. You can silence the End of Life
warning “chirp” by pressing the Test/Silence button or via the Onelink Home App. The horn will chirp, acknowledging
that the End of Life silence feature has been activated. After approximately 2 days, the End of Life “chirp” will resume.
Using the Silence Feature
!
WARNING: Never discharge the unit to quiet an unwanted alarm.
Discharging the alarm disables the unit and removes your protection.
When the Smoke Alarm Is Silenced When the CO Alarm Is Silenced
The smoke alarm will remain silent for up to 15
minutes, then return to normal operation. The CO alarm will remain silent for up to 4 minutes.
If the smoke has not cleared or continues to
increase, the device will go back into alarm.
After 4 minutes, if CO levels remain potentially
dangerous, the horn will start sounding again.
Factory Reset
This feature is intended to reset the alarm to the original factory settings. There are two ways to
reset the alarm to factory settings.
1. Press the Test/Silence button located on the alarm 3 times.
2. From the Onelink Home App.
16
During Testing, You Will See and Hear the Following Sequence:
• “The alarm voice will say “This is only a test. The alarm will sound and for your protection is very loud.
The test will start in 5 seconds. 5...4...3...2...1.” The LED chases Blue. The alarm voice will say “Testing
Smoke.” The horn will sound 3 beeps, twice. The LED chases and flashes Red. The alarm voice will say
“Evacuate, evacuate, there’s fire in the [Location. Example: “Kitchen”].” The LED flashes green.”
• “Next, the alarm voice will say “Testing Carbon Monoxide.” The horn will sound 4 beeps, twice. The LED
chases and flashes Red. The alarm voice will say “Evacuate, evacuate, there’s carbon monoxide in the
[Location. Example: “Kitchen”].” The LED flashes green. The alarm voice will say “Highest carbon monoxide
level was 0 PPM.” The LED chases Blue. The alarm voice will then say “The testing is almost complete.”
After a pause, the alarm voice will say “The test is done, and you are protected.” The LED flashes green.
If the unit does not alarm, make sure it has been activated correctly, and test again. If the unit still does not alarm,
replace it immediately.
You can test this smoke/CO alarm by pressing and holding the Test/Silence button on the side of the alarm until
alarm voice says “Testing” (typically 3-5 seconds).
Weekly Testing
!
WARNING: NEVER use an open flame of any kind to test this unit. You might
accidentally damage or set fire to the unit or to your home. NEVER use vehicle
exhaust! Exhaust may cause permanent damage and voids your warranty.
!
WARNING: DO NOT stand close to the alarm when the horn is
sounding. Exposure at close range may be harmful to your hearing.
When testing, step away when horn starts sounding.
!
CAUTION: It is important to test this unit every week to make sure it is working
properly. Using the test button is the recommended way to test this smoke/CO alarm.
17
Regular Maintenance
Alarm End of Life
This unit has been designed to be as maintenance-free as possible, but there are
a few simple things you must do to keep it working properly:
• Test it at least once a week.
• Clean the smoke/CO alarm at least once a month; gently vacuum the outside of the smoke/CO
alarm using your household vacuum’s soft brush attachment. A can of clean compressed air (sold at
computer or oce supply stores) may also be used. Follow manufacturer instructions for use. Test
the smoke/CO alarm. Never use water, cleaners or solvents since they may damage the unit.
• After cleaning test the alarm.
• If the smoke/CO alarm becomes contaminated by excessive dirt, dust and/or grime, and
cannot be cleaned to avoid unwanted alarms, replace the unit immediately.
• Relocate the unit if it sounds frequent unwanted alarms. See “Where Not To Install” for details.
Discharging the Alarm
After 10 years of operation or low battery warning, discharge the alarm by following the diagram below:
Puncture label in the dotted circle with a screwdriver and slide switch all the way to the left to DISCHARGE.
NOTE: At end of life or low battery indication (chirp): unit must be put into discharge mode
to discharge remaining stored energy in battery. Unit will no longer function once put into this
mode. Unit will resist re-mounting. Once discharged, replace alarm immediately.
!
IM P ORTANT: Actual battery service life depends on the smoke/CO alarm and the
environment in which it is installed. Regardless of the manufacturer’s suggested battery life, you
MUST replace the alarm immediately once the unit starts “chirping” (the “low battery warning”).
1. Puncture label on dotted circle
2. Slide switch to the left
DISCHARGE
Puncture circle
with tool, slide to
permanently
discharge.
PHOTOELECTRIC
W
IMPORTANT!
CARBON MONOXIDE SENSITIVITY:
If CO levels reach 70ppm,
it must activate within 60-240 minutes. At 150ppm within
10-50 minutes. At 400ppm within 4-15 minutes.
Refer to user’s manual for more information.
Installed On
Replace By
Replace alarm 10 years after installation.
CONFORMS TO
UL STD 217 & UL STD 2034
3055574
Follow and Retain User’s Manual: BRK
Brands, Inc.
1301 Joe Battle, El Paso, TX 79936.
Customer Service Team: 1(833) ONE-LINK
www.rstalert.com (1-833-663-5465)
BLACK
•
LINE
ORANGE
•
INTERCONNECT
WHITE
•
NEUTRAL
W
WARNING!
Carbon monoxide cannot be seen or smelled but can kill
you. If alarm signal sounds: 1. Operate Test/Silence button.
2. Call your emergency services. (Fire Dept. or 911)
3. Immediately move to fresh air - outdoors or by an open door/window.
HOW TO DISCHARGE ALARM:
Puncture circle with tool and slide as indicated to
permanently discharge battery. Once discharged, the alarm
cannot be reactivated and must be replaced.
MAINTENANCE AND TESTING:
Alarm is sealed, with no serviceable parts. Battery is not
replaceable. Constant use at high or low temperatures or
high humidity may reduce battery life. Test after installation,
weekly, and after cleaning. Clean monthly – gently vacuum
or use clean compressed air to remove dust. Never use
water, cleaner or solvent, since this may damage the unit.
ALARM GUIDE:
SMOKE ALARM: Three beeps. Three red ashes.
CO ALARM: Four beeps. Four red ashes.
MALFUNCTION: Three “chirps” per minute. Three yellow ashes. Replace alarm.
END OF LIFE: Five “chirps” per minute. Five yellow ashes. Replace alarm.
LED light indicates AC power
SINGLE AND/OR MULTIPLE STATION
SMOKE & CO ALARM
MODEL NO. 1039102
120V AC 134 mA 3.0 Lithium Battery Backup
SMOKE SENSITIVITY: 1.15%-3.20% ft OBSC.
HOW TO ACTIVATE ALARM:
NOTE: Ensure the AC Plug is connected rst prior to
mounting the unit to activate battery back-up.
Install the mounting bracket, align the base of the
alarm to the mounting bracket and turn clockwise.
Contains Transmitter Modules FCC ID:2ANOG-A76F
DISCHARGE
Puncture circle
with tool, slide to
permanently
discharge.
PHOTOELECTRIC
W
IMPORTANT!
CARBON MONOXIDE SENSITIVITY:
If CO levels reach 70ppm,
it must activate within 60-240 minutes. At 150ppm within
10-50 minutes. At 400ppm within 4-15 minutes.
Refer to user’s manual for more information.
Installed On
Replace By
Replace alarm 10 years after installation.
CONFORMS TO
UL STD 217 & UL STD 2034
3055574
Follow and Retain User’s Manual: BRK
Brands, Inc.
1301 Joe Battle, El Paso, TX 79936.
Customer Service Team: 1(833) ONE-LINK
www.rstalert.com (1-833-663-5465)
BLACK
•
LINE
ORANGE
•
INTERCONNECT
WHITE
•
NEUTRAL
W
WARNING!
Carbon monoxide cannot be seen or smelled but can kill
you. If alarm signal sounds: 1. Operate Test/Silence button.
2. Call your emergency services. (Fire Dept. or 911)
3. Immediately move to fresh air - outdoors or by an open door/window.
HOW TO DISCHARGE ALARM:
Puncture circle with tool and slide as indicated to
permanently discharge battery. Once discharged, the alarm
cannot be reactivated and must be replaced.
MAINTENANCE AND TESTING:
Alarm is sealed, with no serviceable parts. Battery is not
replaceable. Constant use at high or low temperatures or
high humidity may reduce battery life. Test after installation,
weekly, and after cleaning. Clean monthly – gently vacuum
or use clean compressed air to remove dust. Never use
water, cleaner or solvent, since this may damage the unit.
ALARM GUIDE:
SMOKE ALARM: Three beeps. Three red ashes.
CO ALARM: Four beeps. Four red ashes.
MALFUNCTION: Three “chirps” per minute. Three yellow ashes. Replace alarm.
END OF LIFE: Five “chirps” per minute. Five yellow ashes. Replace alarm.
LED light indicates AC power
SINGLE AND/OR MULTIPLE STATION
SMOKE & CO ALARM
MODEL NO. 1039102
120V AC 134 mA 3.0 Lithium Battery Backup
SMOKE SENSITIVITY: 1.15%-3.20% ft OBSC.
HOW TO ACTIVATE ALARM:
NOTE: Ensure the AC Plug is connected rst prior to
mounting the unit to activate battery back-up.
Install the mounting bracket, align the base of the
alarm to the mounting bracket and turn clockwise.
Contains Transmitter Modules FCC ID:2ANOG-A76F
2
1
18
Ionization & Photoelectric Technology
Fire Safety Tips
This alarm uses photoelectric technology.
All First Alert® Onelink® smoke alarms conform to regulatory requirements, including UL217 and are designed
to detect particles of combustion. Smoke particles of varying number and size are produced in all fires.
Follow Safety Rules and Prevent Hazardous Situations:
1. Use smoking materials properly. Never smoke in bed.
2. Keep matches or lighters away from children.
3. Store flammable materials in proper containers.
4. Keep electrical appliances in good condition and don’t overload electrical circuits.
5. Keep stoves, barbecue grills, fireplaces and chimneys grease-free and debris-free.
6. Never leave anything cooking on the stove unattended.
7. Keep portable heaters and open flames, like candles, away from flammable materials.
8. Don’t let rubbish accumulate.
NOTE: For maximum protection, use both types of smoke alarms on each level and in every bedroom of your home.
Ionization Technology
Ionization technology is generally more sensitive than photoelectric technology at
detecting small particles, which tend to be produced in greater amounts by flaming
fires, which consume combustible materials rapidly and spread quickly. Sources of these
fires may include paper burning in a wastebasket, or a grease fire in the kitchen.
Photoelectric Technology
Photoelectric technology is generally more sensitive than ionization technology at detecting large
particles, which tend to be produced in greater amounts by smoldering fires, which may smolder for hours
before bursting into flame. Sources of these fires may include cigarettes burning in couches or bedding.
19
Fire Safety Tips (Continued)
Basic Safety Information
Keep alarms clean, and test them weekly. Replace alarms immediately if they are not working properly. Smoke alarms that
do not work cannot alert you to a fire. Keep at least one working fire extinguisher on every floor, and an additional one
in the kitchen. Have fire escape ladders or other reliable means of escape from an upper floor in case stairs are blocked.
!
IM P ORTANT: Dangers, Warnings and Cautions alert you to important operating instructions
or to potentially hazardous situations. Pay special attention to these items. This smoke/CO
alarm is approved for use in single-family residences. It is NOT designed for marine or RV use.
!
CAUTION: This combination smoke/carbon monoxide alarm has two separate
alarms. The CO alarm is not designed to detect fire or any other gas. It will only indicate
the presence of carbon monoxide gas at the sensor. Carbon monoxide gas may be
present in other areas. The smoke alarm will only indicate the presence of smoke that
reaches the sensor. The smoke alarm is not designed to sense gas, heat or flames.
!
WARNING: This unit will not operate without power. The smoke/CO alarm cannot work until
you activate the battery power pack and connect to the power connector. NEVER ignore any
alarm. See “What To Do If Your Smoke/CO Alarm Sounds” on page 18 for more information on
how to respond to an alarm. Failure to respond can result in injury or death. The Silence Features
are for your convenience only and will not correct a problem. See “Using the Silence Feature” on
page 19 for details. Always check your home for a potential problem after any alarm. Failure to
do so can result in injury or death. Test this smoke/CO alarm once a week. If the alarm ever fails
to test correctly, have it replaced immediately! If the alarm is not working properly, it cannot alert
you to a problem. This product is intended for use in ordinary indoor locations of family living
units. It is not designed to measure CO levels in compliance with Occupational Safety and Health
Administration (OSHA) commercial or industrial standards. Individuals with medical conditions
that may make them more sensitive to carbon monoxide may consider using warning devices
which provide audible and visual signals for carbon monoxide concentrations under 30ppm. For
additional information on carbon monoxide and your medical condition, contact your physician.
20
What is CO?
Carbon Monoxide (CO) is an invisible, odorless, tasteless gas produced when fossil fuels do not burn
completely, or are exposed to heat (usually fire). Electrical appliances typically do not produce CO.
These Fuels Include: Wood, coal, charcoal, oil, natural gas, gasoline, kerosene, and propane.
Common appliances are often sources of CO. If they are not properly maintained, are improperly ventilated,
or malfunction, CO levels can rise quickly. CO is a real danger now that homes are more energy ecient. “Air-
tight” homes with added insulation, sealed windows, and other weatherproofing can “trap” CO inside.
Symptoms of CO Poisoning
These symptoms are related to CO POISONING and should be discussed with ALL household members.
Mild Exposure: Slight headache, nausea, vomiting, fatigue (“flu-like” symptoms).
Medium Exposure: Throbbing headache, drowsiness, confusion, fast heart rate.
Extreme Exposure: Convulsions, unconsciousness, heart and lung failure.
Exposure to carbon monoxide can cause brain damage, death.
Finding the Source of CO After an Alarm
Carbon monoxide is an odorless, invisible gas, which often makes it dicult to locate the source of CO
after an alarm. These are a few of the factors that can make it dicult to locate sources of CO:
Because CO may dissipate by the time an investigator arrives, it may be dicult to locate the source of CO.
BRK Brands, Inc. shall not be obligated to pay for any carbon monoxide investigation or service call.
• House well ventilated before the investigator arrives.
• Problem caused by “backdrafting.”
• Transient CO problem caused by special circumstances.
What You Need to Know About CO
!
IM P ORTANT: This CO alarm measures exposure to CO over time. It alarms if CO levels are
extremely high in a short period of time, or if CO levels reach a certain minimum over a long period
of time. The CO alarm generally sounds an alarm before the onset of symptoms in average, healthy
adults. Why is this important? Because you need to be warned of a potential CO problem while you
can still react in time. In many reported cases of CO exposure, victims may be aware that they are not
feeling well, but become disoriented and can no longer react well enough to exit the building or get
help. Also, young children and pets may be the first aected. The average healthy adult might not feel
any symptoms when the CO alarm sounds. However, people with cardiac or respiratory problems,
infants, unborn babies, pregnant mothers, or elderly people can be more quickly and severely aected
by CO. If you experience even mild symptoms of CO poisoning, consult your doctor immediately!
21
Fuel-Burning Appliances: Like portable heater, gas or wood burning
fireplace, gas kitchen range or cooktop, gas clothes dryer.
Damaged or Insufficient Venting: Corroded or disconnected water heater vent pipe, leaking
chimney pipe or flue, or cracked heat exchanger, blocked or clogged chimney opening.
Improper Use of Appliance/Device: Operating a barbecue grill or vehicle
in an enclosed area (like a garage or screened porch).
Transient CO Problems: “Transient” or on-again-o-again CO problems can be caused by outdoor conditions
and other special circumstances. The following conditions can result in transient CO situations:
1. Excessive spillage or reverse venting of fuel appliances caused by outdoor conditions such as:
• Wind direction and/or velocity, including high, gusty winds. Heavy air in the
vent pipes (cold/humid air with extended periods between cycles).
• Negative pressure dierential resulting from the use of exhaust fans.
• Several appliances running at the same time competing for limited fresh air.
• Vent pipe connections vibrating loose from clothes dryers, furnaces, or water heaters.
• Obstructions in or unconventional vent pipe designs which can amplify the above situations.
2. Extended operation of unvented fuel burning devices (range, oven, fireplace).
3. Temperature inversions, which can trap exhaust close to the ground.
4. Car idling in an open or closed attached garage, or near a home.
These conditions are dangerous because they can trap exhaust in your home. Since these conditions can
come and go, they are also hard to recreate during a CO investigation.
Potential Sources of CO in the Home
22
Potential Sources of CO in the Home (Continued)
• Clean chimneys and flues yearly. Keep them free of debris, leaves, and nests for proper air flow. Also, have
a professional check for rust and corrosion, cracks, or separations. These conditions can prevent proper air
movement and cause back-drafting. Never “cap” or cover a chimney in any way that would block air flow.
• Test and maintain all fuel-burning equipment annually. Many local gas or oil companies
and HVAC companies oer appliance inspections for a nominal fee.
• Make regular visual inspections of all fuel-burning appliances. Check appliances for excessive rust and
scaling. Also check the flame on the burner and pilot lights. The flame should be blue. A yellow flame
means fuel is not being burned completely and CO may be present. Keep the blower door on the furnace
closed. Use vents or fans when they are available on all fuel-burning appliances. Make sure appliances
are vented to the outside. Do not grill or barbecue indoors, or in garages or onscreen porches.
• Check for exhaust back-flow from CO sources. Check the draft hood on an operating
furnace for a back-draft. Look for cracks on furnace heat exchangers.
• Check the house or garage on the other side of shared wall.
• Keep windows and doors open slightly. If you suspect that CO is escaping into your home, open
a window or a door. Opening windows and doors can significantly decrease CO levels.
How Can I Protect My Family from CO Poisoning?
A CO alarm is an excellent means of protection. It monitors the air and sounds a loud alarm
before carbon monoxide levels become threatening for average, healthy adults.
A CO alarm is not a substitute for proper maintenance of home appliances.
To help prevent CO problems and reduce the risk of CO poisoning:
23
!
IM P ORTANT: CO alarms are designed to alarm before there is an immediate life
threat. Since you cannot see or smell CO, never assume it’s not present. An exposure
to 100 ppm of CO for 20 minutes may not aect average, healthy adults but after 4
hours the same level may cause headaches. An exposure to 400 ppm of CO may cause
headaches in average, healthy adults after 35 minutes, but can cause death after 2 hours.
What Levels of CO Cause an Alarm?
Underwriters Laboratories Inc. Standard UL2034 requires residential CO alarms to sound when exposed to levels of CO
and exposure times as described below. They are measured in parts per million (ppm) of CO over time (in minutes).
UL2034 Required Alarm Points*:
• If the alarm is exposed to 400 ppm of CO, IT MUST ALARM BETWEEN 4 & 15 MINUTES.
• If the alarm is exposed to 150 ppm of CO, IT MUST ALARM BETWEEN 10 & 50 MINUTES.
• If the alarm is exposed to 70 ppm of CO, IT MUST ALARM BETWEEN 60 & 240 MINUTES.
*Approximately 10% of COHb exposure at levels of 10% to 95% Relative Humidity (RH).
This unit is designed not to alarm when exposed to a constant level of 30 ppm for 30 days.
Standards
Underwriters Laboratories Inc. Single and Multiple Station carbon monoxide alarms UL2034. According to
Underwriters Laboratories Inc. UL2034, Section 1-1.2: “Carbon monoxide alarms covered by these requirements
are intended to respond to the presence of carbon monoxide from sources such as, but not limited to, exhaust
from internal-combustion engines, abnormal operation of fuel-fired appliances, and fireplaces. CO alarms
are intended to alarm at carbon monoxide levels below those that could cause a loss of ability to react to the
dangers of carbon monoxide exposure.” This CO alarm monitors the air at the alarm, and is designed to alarm
before CO levels become life threatening. This allows you precious time to leave the house and correct the
problem. This is only possible if alarms are located, installed, and maintained as described in this manual.
Gas Detection at Typical Temperature and Humidity Ranges
The CO alarm is not formulated to detect CO levels below 30 ppm typically. Tested for false alarm resistance to
Methane (500 ppm), Butane (300 ppm), Heptane (500 ppm), Ethyl Acetate (200 ppm), Isopropyl Alcohol (200
ppm) and Carbon Dioxide (5000 ppm). Values measure gas and vapor concentrations in parts per million.
Audible Alarm
85 dB minimum at 10 feet (3 meters).
Regulatory Information for CO Alarms
24
BASEMENT
BEDROOM
GARAGE
KITCHEN
HALLWAY BEDROOM
LIVING ROOM
Smoke Alarm
One on every level and
in every bedroom
Carbon Monoxide
One on every level and
in every bedroom
Fire Extinguisher
One on every level, plus
kitchen and garage
Recommended Placement
!
IM P ORTANT: Specific requirements for smoke alarm installation vary from state to state
and from region to region. Check with your local Fire Department for current requirements in
your area. It is recommended AC or AC/DC units be interconnected for added protection.
• In all sleeping rooms and guest rooms.
• Outside of each separate dwelling unit sleeping area, within 21 ft (6.4 m) of any
door to a sleeping room, the distance measured along a path of travel.
• On every level of a dwelling unit, including basements.
• On every level of a residential board and care occupancy (small facility), including
basements and excluding crawl spaces and unfinished attics.
• In the living area(s) of a guest suite In the living area(s) of a residential board and care occupancy
NOTE: When using cleaning products, make sure accommodation spaces are well ventilated.
Installing Smoke Alarms in Single-Family Residences
NOTE: This information is specific to the smoke and carbon monoxide alarm and is not applicable to the home
automation capability.
The National Fire Protection Association (NFPA), recommends one smoke alarm on every level and in every
bedroom. In new construction, the smoke alarms must be AC powered and interconnected. See “Recommended
Placement” for details. For additional coverage, it is recommended that you install a smoke alarm in all rooms, halls,
storage areas, finished attics, and basements, where temperatures normally remain between 40˚ F (4.4˚ C) and
100˚ F (37.8˚ C). Make sure no door or other obstruction could keep smoke from reaching the smoke alarms.
For your information, the National Fire Alarm and Signaling Code, NFPA 72, reads as follows:
Required Detection. Where required by applicable laws, codes, or standards for a specific type of
occupancy, approved single- and multiple-station smoke alarms shall be installed as follows:
Regulatory Information for Smoke Alarms
25
Regulatory Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
RF Exposure Information: This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure
limits, human proximity to the antenna shall not be less than 20cm during normal operation.
Federal Communications Commission (FCC) Compliance Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
!
WARNING: Changes or modifications to this unit not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
26
Modular Devices FCC and
Compliance Statements
OEM Responsibilities to Comply With FCC Regulations
The A76F Module has been certified for integration into products only by OEM integrators under the following condition:
1. The transmitter module must not be co-located or operating in
conjunction with any other antenna or transmitter.
As long as the condition above is met, further transmitter testing will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements required
with this module installed (for example, digital device emissions, PC peripheral requirements, etc.).
!
IM P ORTANT: In the event that these conditions cannot be met (for certain
configurations or co-location with another transmitter), then the FCC authorizations
are no longer considered valid and the FCC ID cannot be used on the final product. In
these circumstances, the OEM integrator will be responsible for re-evaluating the end
product (including the transmitter) and obtaining a separate FCC authorization.
End Product Labeling
The A76F Module is labeled with its own FCC ID. If the FCC ID is not visible when the module is installed inside
another device, then the outside of the device into which the module is installed must also display a label referring
to the enclosed module. In that case, the final end product must be labeled in a visible area with the following:
“Contains Transmitter Modules FCC ID: 2ANOG-A76F”
Or
“Contains FCC ID: 2ANOG-A76F”
The OEM of the A76F Module must only use the approved antenna(s) listed above, which have been certified
with this module. The OEM integrator has to be aware not to provide information to the end user regarding how
to install or remove this RF module or change RF related parameters in the user manual of the end product.
To comply with FCC RF radiation exposure limits for general population, the antenna(s) used for this
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
27
Special Compliance Considerations
General Limitations for Smoke/CO Alarms
This smoke alarm is suitable for use in apartments, condominiums, townhouses, hospitals, day care facilities, health care
facilities, boarding houses, group homes and dormitories provided a primary fire detection system already exists to
meet fire detection requirements in common areas like lobbies, hallways, or porches. Using this smoke alarm in common
areas may not provide sucient warning to all residents or meet local fire protection ordinances/regulations.
This smoke alarm alone is not a suitable substitute for complete fire detection systems in places housing many people—like
apartment buildings, condominiums, hotels, motels, dormitories, hospitals, health care facilities, nursing homes, day care
facilities, or group homes of any kind. It is not a suitable substitute for complete fire detection systems in warehouses,
industrial facilities, commercial buildings, and special-purpose non-residential buildings which require special fire detection
and alarm systems. Depending on the building codes in your area, this smoke alarm may be used to provide additional
protection in these facilities. In new construction, most building codes require the use of AC or AC/DC powered smoke
alarms only. In existing construction, AC, AC/DC, or DC powered smoke alarms can be used as specified by local building
codes. Refer to NFPA 72 (National Fire Alarm and Signaling Code) and NFPA 101 (Life Safety Code), local building codes,
or consult your Fire Department for detailed fire protection requirements in buildings not defined as “households”.
HUD MAP Program: Certain HUD battery powered smoke alarm applications, especially those
that fall under HUD 223(f) MAP (Multi-family Accelerated Processing), may require a 10 Year
sealed tamper resistant battery. This alarm does not have a 10 Year sealed battery.
This smoke/CO alarm is intended for residential use. It is not intended for use in industrial applications where
Occupational Safety and Health Administration (OSHA) requirements for carbon monoxide alarms must be met. The
smoke alarm portion of this device is not intended to alert hearing impaired residents. Special purpose smoke alarms
should be installed for hearing impaired residents (CO alarms are not yet available for the hearing impaired).
Smoke/CO Alarms May Not Waken All Individuals. Practice the escape plan at least twice a year, making sure that everyone is
involved – from kids to grandparents. Allow children to master fire escape planning and practice before holding a fire drill at night
when they are sleeping. If children or others do not readily waken to the sound of the smoke/CO alarm, or if there are infants or
family members with mobility limitations, make sure that someone is assigned to assist them in fire drill and in the event of an
emergency. It is recommended that you hold a fire drill while family members are sleeping in order to determine their response to
the sound of the smoke/CO alarm while sleeping and to determine whether they may need assistance in the event of an emergency.
3055574
28
General Limitations for Smoke/CO Alarms (Continued)
Smoke/CO Alarms Cannot Work Without Power. Battery operated units cannot work if the batteries are missing,
disconnected or dead, if the wrong type of batteries are used, or if the batteries are not installed correctly. If the AC power is
cut o for any reason (open fuse or circuit breaker, failure along a power line or at a power station, electrical fire that burns
the electrical wires, etc.). If you are concerned about the limitations of battery or AC power, install both types of units.
This Smoke/CO Alarm Will Not Sense Smoke or CO that Does Not Reach the Sensors. It will only sense smoke or CO at the
sensor. Smoke or CO may be present in other areas. Doors or other obstructions may aect the rate at which CO or smoke
reaches the sensors. If bedroom doors are usually closed at night, we recommend you install an alarm device (Combination
CO and smoke alarm, or separate CO alarms and smoke alarms) in each bedroom and in the hallway between them.
This Smoke/CO Alarm May Not Sense Smoke or CO on Another Level of the Home. Example: This alarm device,
installed on the second floor, may not sense smoke or CO in the basement. For this reason, one alarm device may not
give adequate early warning. Recommended minimum protection is one alarm device in every sleeping area, every
bedroom, and on every level of your home. Some experts recommend battery powered smoke and CO alarms be used
in conjunction with interconnected AC powered smoke alarms. For details, see “About Smoke Alarms” for details.
Smoke/CO Alarms May Not Be Heard. The alarm horn loudness meets or exceeds current UL standards of 85 dB at 10
feet (3 meters). However, if the smoke/CO alarm is installed outside the bedroom, it may not wake up a sound sleeper
or one who has recently used drugs or has been drinking alcoholic beverages. This is especially true if the door is closed
or only partly open. Even persons who are awake may not hear the alarm horn if the sound is blocked by distance or
closed doors. Noise from trac, stereo, radio, television, air conditioner, or other appliances may also prevent alert
persons from hearing the alarm horn. This smoke/CO alarm is not intended for people who are hearing impaired.
The alarm may not have time to alarm before the fire itself causes damage, injury, or death, since smoke
from some fires may not reach the unit immediately. Examples of this include persons smoking in bed,
children playing with matches, or fires caused by violent explosions resulting from escaping gas.
This Smoke/CO Alarm Is Not a Substitute for Life Insurance. Though this smoke/CO alarm warns
against increasing CO levels or the presence of smoke, BRK Brands, Inc. does not warrant or imply
in any way that they will protect lives. Homeowners and renters must still insure their lives.
This Smoke/CO Alarm Has a Limited Life. Although this smoke/CO alarm and all of its parts have passed many
stringent tests and are designed to be as reliable as possible, any of these parts could fail at any time. Therefore,
you must test this device weekly. The unit should be replaced immediately if it is not operating properly.
This Smoke/CO Alarm Is Not Foolproof. Like all other electronic devices, this smoke/CO alarm has
limitations. It can only detect smoke or CO that reaches the sensors. It may not give early warning of
the source of smoke or CO is in a remote part of the home, away from the alarm device.
29
App FAQ
If the App... Problem... You Should...
Is unable to be downloaded or installed. You cannot download or install the app. Contact Customer Service Team
Alarm FAQ
If the Alarm... Problem... You Should...
Light flashes yellow and Horn sounds
three “chirps” every minute. Voice:
“Detector error. Please see manual or
call customer service” every 5 hours.
Malfunction Signal. Device is not working
properly and needs to be replaced.
Units under warranty should be returned
to manufacturer for replacement. See
“Limited Warranty” for details.
Horn sounds 5 “chirps” every minute. End of Life Signal.
Alarm needs to be replaced. Immediately replace and discharge the alarm.
White LED light turns off. Alarm is running on battery back-up. Check all connections or restore power.
Does not connect to your Wireless /
Bluetooth or opportunity missed for pairing.
Alarm will not pair or you would like to
reset the device to clear all settings.
Press the test button 3 times to reset alarm
and try to pair to Wireless and Bluetooth again.
“Chirps” once per minute. The back-up battery is not activated. Ensure the alarm is correctly attached
to the mounting bracket.
Carbon Monoxide Alarm ONLY:
CO alarm goes back into alarm 4
minutes after you Silence it.
CO levels indicate a potentially
dangerous situation.
If you are feeling symptoms of CO poisoning,
evacuate your home and call 911 or the Fire
Department. Refer to “What To Do If the
CO Alarm Sounds” on page 18 for details.
CO alarm sounds frequently even
though no high levels of CO are
revealed in an investigation.
The CO alarm may be improperly
located. Refer to “Where to
Install” on page 7 for details.
Relocate your alarm. If frequent alarms
continue, have home rechecked for
potential CO problems. You may be
experiencing an intermittent CO problem.
Smoke Alarm ONLY:
Smoke alarm sounds when no smoke is visible. Unwanted alarm may be caused by non-
emergency source like cooking smoke.
Silence alarm on App or using unit button;
clean the alarm’s cover with a soft, clean cloth.
If frequent unwanted alarms continue, relocate
your alarm. Alarm may be too close to kitchen,
cooking appliance, or steamy bathroom.
NOTE: This alarm contains new Wireless and HomeKit technology that is not wirelessly compatible with previously branded Onelink wireless alarms.
If you have questions that cannot be answered by reading this manual, contact our
Customer Service Team at onelinksupport@firstalert.com or 1 (833)ONE-LINK (1-833-663-5465)
Troubleshooting Guide
General Limitations for Smoke/CO Alarms (Continued)
30
BRK Brands, Inc., (“BRK”) the maker of First Alert® brand products warrants that for a period of three years from the date
of purchase, this product will be free from defects in material and workmanship. BRK, at its option, will repair or replace this
product or any component of the product found to be defective during the warranty period. Replacement will be made
with a new or re-manufactured product or component. If the product is no longer available, replacement may be made
with a similar product of equal or greater value. This is your exclusive warranty. This warranty is valid for the original retail
purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase
is required to obtain warranty performance. BRK dealers, service centers, or retail stores selling BRK products do not have
the right to alter, modify or any way change the terms and conditions of this warranty. This warranty does not cover normal
wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage
or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than BRK or an
authorized service center. Further, the warranty does not cover Acts of God, such as fire, flood, hurricanes and tornadoes
or any batteries that are included with this unit. BRK shall not be liable for any incidental or consequential damages
caused by the breach of any express or implied warranty. Except to the extent prohibited by applicable law, any implied
warranty of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty.
Some states, provinces or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or
limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights that vary from state to state or province to province.
How to Obtain Warranty Service
Service: If service is required, do not return the product to your retailer. In order to obtain warranty service,
contact our Customer Service Team at onelinksupport@firstalert.com or 1 (833)ONE-LINK (1-833-663-5465).
To assist us in serving you, please have the model number and date of purchase available when calling.
For Warranty Service Return To: 1301 Joe Battle, El Paso, TX 79936
Disposal: Waste electrical products should not be disposed of with regular household waste. Please recycle where
facilities exist. Check local requirements for disposal of Lithium powered electronic devices. The alarm should
be discharged before disposal. See, “Discharging the Alarm”. You can also return your alarm to us for disposal.
For return address see above. Please include a note confirming the product is being returned for disposal.
Communication distance between alarms may vary from home to home depending on environment, construction
materials and size of structure. The quantity of alarm required will depend on these factors. See page 12 for details.
Limited Warranty
31
Copyright and Technical Specifications
©2018 BRK Brands, Inc. All rights reserved. Distributed by BRK Brands, Inc., Aurora, Illinois 60504.
BRK Brands, Inc. is a subsidiary of Newell Brands Inc. (NYSE:NWL). Printed in USA.
Apple HomeKit
Apple, iPhone, iPad, iPad Air, and iPod touch are trademarks of Apple Inc., registered in the U.S.
and other countries. HomeKit is a trademark of Apple Inc. App Store is a service mark of Apple Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by BRK Brands, Inc., is under license. Other trademarks and trade names
are those of their respective owners. Wi-Fi® is a registered trademark of Wi-Fi Alliance.
Controlling this HomeKit-enabled accessory automatically and away from home requires an
Apple TV with tvOS 10.0 or later or an iPad with iOS 10.0 or later set up as a home hub.
To control this HomeKit-enabled accessory, iOS 10.0 or later is recommended.
©2018 BRK Brands, Inc. All rights reserved. • Distributed by BRK Brands, Inc.
BRK Brands, Inc. is a subsidiary of Newell Brands Inc. (NYSE:NWL)
3901 Liberty Street Road, Aurora, IL 60504-8122
Customer Service Team: 1 (833) ONE-LINK (1-833-663-5465) • onelink.firstalert.com
06/18 • Printed in USA • M08-159406-163529
… 14 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw First Alert 1039102 - Onelink bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van First Alert 1039102 - Onelink in de taal/talen: Engels als bijlage per email.

De handleiding is 2.73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info