Handleiding Finlux 55UT3EC320 S-T (pagina 8 van 33) (Engels)

623277

Verklein

Vergroot

Pagina terug

1/33

Pagina verder

55 inch LED TV

55UT3EC320S-T

Owner’s manual

www.finlux.co.uk

50296202

English - 1 -

Contents

Safety Information .................................................. 2

Getting Started ....................................................... 3

Notications & Features & Accessories .................. 3

Specication ........................................................... 5

Remote Control ...................................................... 6

Connections............................................................ 7

First Time Installation - USB Connections .............. 8

TV Menu Features and Functions .........................11

General TV Operation .......................................... 14

Using the 3D Mode ............................................... 14

3D Bluetooth Active Shutter Glasses.................... 17

Connectivity Functions ......................................... 19

Wireless Display .................................................. 21

Using DLNA Network Service ............................... 21

Internet Portal ....................................................... 22

iPlayer Application ................................................ 23

Internet Browser ................................................... 24

Software Upgrade................................................. 25

Troubleshooting & Tips ......................................... 25

Nero MediaHome Installation ............................... 26

PC Input Typical Display Modes .......................... 27

AV and HDMI Signal Compatibility ....................... 27

Supported File Formats for USB Mode ................ 28

Supported DVI Resolutions .................................. 29

Important Instructions ........................................... 30

English - 2 -

Safety Information

WARNING: Never let people (including

children) with reduced physical, sensory or

mental capabilities or lack of experience and / or

knowledge use electrical devices unsupervised.

• For ventilation purposes, leave a free space of at

least 10 cm all around the set.

•Do not block ventilation holes.

•Do not place the TV on sloping or unstable surfaces,

the TV may tip over.

• Use this device in moderate climates.

• The power cord plug should be easily accessible. Do

not place the TV, furniture, etc. on the power cord.

A damaged power cord/plug can cause re or give

you an electric shock. Handle the power cord by the

plug, do not unplug the TV by pulling the power cord.

Never touch the power cord/plug with wet hands

as this could cause a short circuit or electric shock.

Never make a knot in the power cord or tie it with

other cords. When damaged it must be replaced,

this should only be done by qualied personnel.

•Do not use this TV in a humid or damp place. Do

not expose the TV to liquids. If any liquid falls into

the cabinet unplug the TV and have it checked by

qualied personnel before operating it any further.

•Do not expose the TV to direct sunlight or other

heat sources.

• The TV should not be placed near to open

ames or sources of intense heat such as

an electric heater.

• Excessive sound pressure from earphones

and headphones can cause hearing loss.

• Ensure that no open ame sources, such as

lit candles, are placed on top of the TV.

• To prevent injury, this TV must be securely

attached to the wall in accordance with the

installation instructions (if the option is available).

• Occasionally, a few non-active pixels may appear

on the screen as a xed blue, green or red point.

Please note that this does not affect the performance

of your product. Take care not to scratch the screen

with ngernails or other hard objects.

• Before cleaning, unplug the TV from the wall socket.

Only use a soft, dry cloth while cleaning.

Warning

Serious injury or death risk

Risk of electric shock

Dangerous voltage risk

Caution

Injury or property damage risk

Important

Operating the system correctly

Notice

Additional notes marked

If there is lightning or storms, or if the TV is not

going to be used for a while (e.g. if going away

on holiday), disconnect the TV set from the

mains. The mains plug is used to disconnect

TV set from the mains and therefore it must

remain readily operable.

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

IMPORTANT - Please read these instructions fully before installing or operating

Note : Follow the on screen instructions for operating the

related features.

Don’t operate your TV in extreme ambient

conditions as this may cause damage to your TV.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

English - 3 -

Environmental Information

This television is designed to consume less energy

to help save the environment. To reduce energy

consumption, you should take the following steps:

You can use the Power Save Mode setting, located

in the Picture menu. If you set the Power Save Mode

as Eco, the TV will switch to energy-saving mode

and the luminance level of TV set will be decreased

to the optimum level. Note that some picture settings

will be unavailable to be changed when the TV is in

Power Save Mode.

If Picture Off is selected, “Screen will be off in

15 seconds.” message will be displayed. Select

PROCEED and press OK to continue. The screen

will be off immediately.

When the TV is not in use, please switch off or

disconnect the TV from the mains plug. This will also

reduce energy consumption.

StandbyNotications

If the TV does not receive any input signal (e.g. from

an aerial or HDMI source) for 5 minutes, it will go

into standby. When you next switch-on, the following

message will be displayed: “TV switched to stand-by

mode automatically because there was no signal

for a long time.” Press OK to continue.

The Auto TV OFF option(in Settings>Other Settings

menu) is set to Off by default. If this setting is changed

and the TV has been left on and not been operated

during the set time, it will switch into standby mode

after the set time has expired. When you next switch-

on, the following message will be displayed. “TV

switched to stand-by mode automatically because

no operation was made for a long time.” Press OK

to continue.

Features

• TV supports Ultra HD (Ultra High Denition - also

known as 4K) which provides resolution of 3840 x

2160 (4K:2K). It equals 4 times the resolution of Full

HD TV by doubling the pixel count of the Full HD TV

both horizontally and vertically. Ultra HD resolutions

are supported from HDMI inputs of the TV.

• Supports the viewing of 3D content from devices

such as a High Denition Satellite Receiver or Blu-

ray Player via HDMI

• Remote controlled colour TV.

• Fully integrated digital TV(DVB-T2)

• HDMI inputs are for connecting a device that has

a HDMI socket.

• USB input.

• Programme recording.

• Programme timeshifting.

• OSD menu system.

• Scart socket for external devices (such as DVD

Players, PVR, video games, etc.)

• Stereo sound system.

• Teletext.

• Headphone connection.

• Automatic programming system.

• Manual tuning.

• Automatic power down after up to six hours.

• Sleep timer.

• Child lock.

• Automatic sound mute when no transmission.

• NTSC playback.

• AVL (Automatic Volume Limiting).

• PLL (Frequency Search).

• PC input.

• Plug&Play for Windows 98, ME, 2000, XP, Vista,

Windows 7, 8 and 10

• Game Mode (Optional).

• Ethernet (LAN) for Internet connectivity and service

• 802.11n built in WIFI Support.

• DLNA

• Bluetooth support

• 100Hz frequency scan.

Accessories Included

Remote Control

Batteries: 2 x AAA

Instruction Book

Quick Start Guide

Side AV Connection Cable

Mini scart adapter cable

3D Glasses X 2

Getting Started

Notications&Features&Accessories

English - 4 -

TVControlButtons&Operation

1. Standby On/Off button

2. TV/AV button

3. Programme Up/Down buttons

4. Volume Up/Down buttons

Operation with the Buttons on the

Press button to decrease volume or

button to increase volume. Press P/

CH + button to select the next programme

or P/CH - button to select the previous

programme.

Press the or button at the same

time to view main menu. In the Main menu

select sub-menu using TV/AV button and set the

sub-menu using or buttons. To see what

options are available via the menu, refer to the menu

system section of this manual. Press the TV/AV button

in the control panel on the TV to switch between AV modes.

Note: Function indications of the buttons will be

displayed on the screen when pressed.

Inserting the Batteries into the Remote

Lift the cover on the back of the remote upward

gently. Install two AAA batteries. Make sure to

match the + and - ends of the batteries in the

battery compartment (observe the correct polarity)

Replace the cover.

Connect Power

IMPORTANT: The TV set is designed to operate on

220-240V AC, 50 Hz socket. After unpacking, allow

the TV set to reach the ambient room temperature

before you connect the set to the mains. Plug the

power cable to the mains socket outlet.

Antenna Connection

Connect the aerial TV plug to AERIAL INPUT (ANT-

TV) socket located on the rear bottom side of the TV.

Rear bottom side of the TV:

Notication

Manufactured under license from Dolby Laboratories.

TRADEMARK ACKNOWLEDGMENT

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

“HDMI, the HDMI logo and High-Denition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC.”

“DLNA®©, the DLNA Logo and DLNA CERTIFIED® are

trademarks, service marks, or certication marks of

the Digital Living Network Alliance.”

“YouTube and the YouTube logo are trademarks of

Google Inc.”

English - 5 -

Digital Teletext

Press TXT ( ) button to view digital teletext

information. Operate it with the coloured buttons, cursor

buttons and the OK button. The operation method may

differ depending on the contents of the digital teletext.

Follow the instructions displayed on the digital teletext

screen. When the TXT ( ) button is pressed again, the

TV returns to television broadcast.

Information for Users on Disposal of Old

Equipment and Batteries

[European Union only]

These symbols indicate that equipment with these

symbols should not be disposed of as general

household waste. If you want to dispose of the

product or battery, please consider the collection

systems or facilities for appropriate recycling.

Notice: The sign Pb below the symbol for batteries indicates

that this battery contains lead.

Products

Battery

Specication

TV Broadcasting PAL B/G D/K K

Receiving Channels VHF (BAND I/III) - UHF

(BAND U) - HYPERBAND

Number of Preset

Channels

1000

Channel Indicator On Screen Display

RF Aerial Input 75 Ohm (unbalanced)

Operating Voltage 220-240V AC, 50Hz.

Audio Output Power

(WRMS.) (10% THD)

2x12,5W

Power Consumption 225 W

TV Dimensions DxLxH

(with foot)

243 x 1232 x 768

TV Dimensions DxLxH

(without foot)

99/106 x 1232 x 713

Display 55”

Display Resolution 3840 x 2160

Operation temperature

and operation

humidity:

0ºC up to 40ºC, 85% humidity

max

Vesa M6 400 x 400

English - 6 -

Getting Started

Remote Control

.,/@

Q.MENU

EXIT

BACK

LANG.

SOURCE

P+

P-

V+

V-

1. Source

2. Launches Netix Application

3. Internet Portal

4. Play ( in media browser mode )

5. Programme recording

6. Rapid reverse ( in media browser mode )

7. Mono/Stereo - Dual I-II / Current language (in

DVB channels)

8. Green button

9. Red button

10. Numeric buttons

11. Channel List/TV source

12. Menu

13. Volume up / down

14. Back (Return) / Index (in TXT mode)

15. Favourite channel list

16. Expand (in TXT mode) / Screen size

17. My button 1 / Youtube (*)

18. My button 2 (**)

19. Teletext / Mix

20. Electronic programme guide

21. Mute

22. Info / Reveal (in TXT mode)

23. Exit

24. Ok / Select / Hold (in TXT mode)

25. Programme up / down

26. Navigation buttons

27. Quick menu

28. Previous programme

29. Blue button

30. Yellow button

31. Subtitle on / off

32. Rapid advance ( in media browser mode )

33. Stop ( in media browser mode )

34. Pause (in media browser mode) / Timeshift

recording

35. Media browser

36. Launches Youtube

37. Standby button

38. Function LED

(*) MY BUTTON 1:

This button’s main function is to run Youtube link.

However, if you want to change this function, you

can press MY BUTTON 1 for ve seconds when on

a desired source or channel, until the “MY BUTTON

IS SET” message is displayed on the screen. This

conrms that the selected MY BUTTON

is now associated with the selected function. Note that

if you perform rst time installation, MY BUTTON 1

will return to its default function.

(*) MY BUTTON 2:

Press MY BUTTON 2 for ve seconds when on a

desired source or channel, until the “MY BUTTON

IS SET” message is displayed on the screen. This

confirms that the selected MY BUTTON is now

associated with the selected function.

English - 7 -

NOTE: When connecting

a device via the YPbPr or

Side AV input, you must

use a connection cables

to enable connection. See

the illustrations above. |

To enable PC audio, you

will need to use the SIDE

AV CONNECTION cable’s

WHITE & RED inputs. | If an

external device is connected

via the SCART socket, the TV

will automatically switch to AV

mode.| When receiving DTV

channels (Mpeg4 H.264) or

while in Media Browser mode,

output will not be available

via the scart socket. | When

using the wall mounting kit

(optional), we recommend

that you plug all your cables

into the back of the TV before

mounting on the wall. | Insert

or remove the CI module only

when the TV is SWITCHED

OFF. You should refer to the

module instruction manual

for details of the settings.

| Each USB input of your TV

supports devices up to 500mA.

Connecting devices that have

current value above 500mA may

damage your TV.

Getting Started

Connections

Connector Type Cables Device

Mini Scart

Connection

(rear bottom)

Mini Scart adapter cable

(supplied)

VGA

Connection

(back)

PC/YPbPr

Audio

Connection

(back)

YPbPr or PC Connection Cable

(not supplied)

(Back)

HDMI

Connection

(rear bottom

&side)

S/PDIF

(Optical Out)

(rear bottom)

Side AV

(Audio/Video)

Connection

(side)

Side AV Cable

(supplied)

Headphone

Connection

(side)

YPbPr

Connection

(back)

YPbPr Connection

(Cable not supplied)

USB

Connection

(side)

Connection

(side)

CAM

module

Subwoofer

Connection

(back)

(*) For external subwoofer connection

HDMI 1 ARC (Audio Return Channel)

English - 8 -

Switching On/Off TV

Connect the power cord to the 220-240V AC, 50 Hz.

To Switch the TV On

Press the “ ” button, P+ / P- or a numeric button on

the remote control.

To Switch the TV Off

Press the “ ” button on the remote control or press

the “ ” push button on the TV. The TV will now switch

to standby mode.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched to standby mode, the standby

LED can blink to indicate that features such as Standby Search,

Over Air Download or Timer is active. The LED can also blink

when you switch on the TV from standby mode.

First Time Installation

Plug aerial cable into the ANT socket on your TV.

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK.

The First Time Installation (FTI) screen will be

displayed next. Set your preferences using the

navigation buttons and when nished, press OK to

continue.

You can activate Store mode option to be available

in “Other settings” menu and your TV’s settings will

be optimized for best display quality. A conrmation

screen will be displayed. Select YES to proceed.

If Home Mode is selected, Store mode will not be

available after the First Time Installation. Press OK

button to continue.

NOTE: You can press MENU button to cancel.

After all the available stations are stored, the Channel

List will be displayed on the screen. If you like how the

channels are sorted according to the LCN (*), please

select “Yes” and than press OK.

Press MENU button to quit channel list and watch TV.

(*) LCN is the Logical Channel Number system that

organizes available broadcasts in accordance with a

recognizable channel sequence (if available).

Media Playback via USB Input

You can connect a 2.5” and 3.5” inch (hdd with external

power supply) external hard disk drives or USB memory

stick to your TV by using the USB inputs of the TV.

IMPORTANT! Back up your les before making

any connections to the TV. The Manufacturer will

not be responsible for any le damage or data loss.

Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32

and NTFS disk formatting but recording will not be

available with NTFS formatted disks.

While formatting a USB hard disk that has 1TB (Tera

Byte) or more le capacity, you can experience

problems with the formatting process.

Quickly plugging and unplugging USB devices, is a

very hazardous operation. This may cause physical

damage to the USB port and the USB device itself.

Do not pull out the USB module while playing a le.

You can use USB hubs with your TV’s USB inputs.

External power supplied USB hubs are recommended

in such a case.

It is recommended to use the TV’s USB input(s)

directly, if you are going to connect a USB hard disk.

Recording a Programme

IMPORTANT: When using a new USB hard disk drive,

it is recommended that you rst format the disk using

your TV’s “Format Disk” option.

Note: To record a programme, you should rst connect

a USB disk to your TV while the TV is switched off.

You should then switch on the TV to enable the

recording feature.

To use the recording function, you need to connect

a USB disk or an external hard disk drive to the TV

and the connected USB disk should have at least 1

GB capacity and should have 2.0 speed compatibility.

If the connected USB device does not support 2.0

speed, an error message will be displayed.

Note: Recorded programmes are saved into the

connected USB disk. If desired, you can store/copy

recordings onto a computer; however, these les will

not be available to be played on a computer. You can

play the recordings only via your TV.

Note: Lip Sync delay may occur during the timeshifting.

Radio record is supported. The TV can record

programmes up to ten hours.

Recorded programmes are split into 4GB partitions.

If the writing speed of the connected USB disk is not

sufcient, the recording may fail and the timeshifting

feature may not be available.

Getting Started

First Time Installation - USB Connections

English - 9 -

It is recommended to use USB hard disk drive to

recording HD programmes.

Do not plug out the USB/HDD during a recording. This

may harm the connected USB/HDD.

Multipartition support is available. A maximum of two

different partitions are supported. The rst partition of

the USB disk is used for PVR ready features. It also

must be formatted as the primary partition to be used

for the PVR ready features.

Some stream packets may not be recorded because of

signal problems, so sometimes the video may freeze

during playback.

Record, Play, Pause, Display (for PlayListDialog) keys

can not be used when teletext is ON. If a recording

starts from the timer when teletext is ON, teletext

is automatically turned off. Also teletext usage is

disabled when there is an ongoing recording or

playback.

Timeshift Recording

Press (PAUSE) button while watching a broadcast

to activate timeshifting mode. In timeshifting mode,

the programme is paused and simultaneously

recorded to the connected USB disk. Press (PLAY)

button again to resume the paused programme from

where you stopped. Press the STOP button to stop

timeshift recording and return to the live broadcast.

Note: Timeshift cannot be used while in radio mode.

Note: You cannot use the timeshift fast reverse feature

before advancing the playback with the fast forward

option.

Instant Recording

Press (RECORD) button to start recording an

event instantly while watching a programme. You can

press (RECORD) button on the remote control

again to record the next event on the EPG. In this

case, an OSD will be displayed, indicating the

programmed events for recording. Press (STOP)

button to cancel instant recording.

Note: You can not switch broadcasts or view the Media Browser

during the recording mode. While recording a programme or

during the timeshifting, a warning message appears on the

screen if your USB device speed is not sufcient.

Watching Recorded Programmes

Select the Recordings Library from the Media

Browser menu. Select a recorded item from the list (if

previously recorded). Press the OK button to view the

Play Options. Select an option then press OK button.

Note: Viewing main menu and menu items will not be available

during the playback.

Press the (STOP) button to stop a playback and

return to the Recordings Library.

Slow Forward

If you press the (PAUSE) button while watching

recorded programmes, the slow forward feature will be

available. You can use the button to slow forward.

Pressing the button consecutively will change slow

forwarding speed.

RecordingConguration

Select the Recording Configuration item in the

System>Settings menu to congure the recording

settings.

Format Disk: You can use the Format Disk feature

for formatting the connected USB disk. Your pin is

required to use the Format Disk feature.

Note: Default PIN can be set to 0000 or 1234. If you

have dened the PIN (is requested depending on the

country selection) during the First Time Installation

or changed the default PIN later from the Set PIN

option under the Parental Settings menu, use the

PIN that you have dened.

IMPORTANT: Formatting your USB drive will erase

ALL the data on it and it’s le system will be converted

to FAT32. In most cases operation errors will be xed

after a format but you will lose ALL your data.

If “USB disk writing speed too slow to record” message

is displayed on the screen while starting a recording,

try restarting the recording. If you still get the same

error, it is possible that your USB disk does not meet

the speed requirements. Try connecting another

USB disk.

Media Browser Menu

You can play photo, music, and movie les stored

on a USB disk by connecting it to your TV. Connect

a USB disk to one of the USB inputs located on the

side of the TV. Pressing the MENU button while in the

Media Browser mode will access the Picture, Sound

and Settings menu options. Pressing the MENU button

again will exit from this screen. You can set your Media

Browser preferences by using the Settings Menu.

Loop/Shufe Mode Operation

Start playback with and

activate

TV plays next file and

loop the list.

Start playback with

OK and

activate

The same file will

be played in a loop

(repeat).

Start playback with

OK/

and activate

The file will be

played in a shuffle.

English - 10 -

Quick Menu

The Quick Settings menu allows you to access some

options quickly. This menu includes Power Save Mode,

3D Mode, Virtual 3D, Picture Mode, Favourites, Sleep

Timer, FollowMe TV, FollowMe TV to DMR , CEC RC

Passthrough options. Press Q.MENU button on the

remote control to view the quick menu. See the following

chapters for details of the listed features.

FollowMe TV (Optional)

With your mobile device you can stream the current

broadcast from your smart TV using the FollowMe

TV feature. Install the appropriate Smart Center

application to your mobile device. Start the application.

For further information on using this feature refer to

the instructions of the application you use.

Note: This application is not compatible with all mobile devices.

FollowMe TV to DMR (Optional)

This feature allows video streaming from your TV to

mobile devices using proper applications (e.g. UPnP -

Universal Plug and Play - applications like BubbleUPnP)

or to another TV. Activate FollowMe TV to DMR from the

System>Settings>More menu and timeshifting starts.

Start the application on your device and select your TV.

To stream to another TV press the Red button on the

remote after starting a timeshift recording by pressing

the Pause button on the remote. Device selection menu

will be displayed. Choose the receiver TV and press OK.

Note: FollowMeTV and FollowMe TV to DMR features require

a connected USB storage device with FAT32 format and enough

space in it. Media Renderer option in the More menu should be

set as Enabled. HD channels are not supported and both of the

devices must be connected to the same network.

E-Manual (Optional)

You can nd instructions for your TV’s features in

the E-Manual.

To use E-Manual, press to the Info button while main

menu is displayed on the screen.

By using the navigation buttons select a desired

category. Every category includes a different topics.

Select a topic and press OK to read instructions.

To close the E-Manual screen press the Exit button.

Note: The contents of the E-Manual may vary according

to model.

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled

devices, that are connected through HDMI ports by

using the remote control of the TV.

The CEC option in the System>Settings>More menu

should be set as Enabled at rst. Press the Source

button and select the HDMI input of the connected CEC

device from the Source List menu. When new CEC

source device is connected, it will be listed in source

menu with its own name instead of the connected HDMI

ports name(such as DVD Player, Recorder 1 etc.).

The TV remote is automatically able to perform the

main functions after the connected HDMI source has

been selected.

To terminate this operation and control the TV via

the remote again, press and hold the “0-Zero” button

on the remote control for 3 seconds. Or press Quick

Menu button on the remote, highlight the CEC RC

Passthrough and set as Off by pressing Left or Right

button. This feature can also be enabled or disabled

under the System>Settings>More menu.

The TV supports also ARC(Audio Return Channel)

feature. This feature is an audio link meant to replace

other cables between the TV and the audio system

(A/V receiver or speaker system).

When ARC is active, TV does not mute its other audio

outputs automatically. So you need to decrease TV

volume to zero manually, if you want to hear audio from

connected audio device only (same as other optical or

co-axial digital audio outputs). If you want to change

connected device’s volume level, you should select that

device from the source list. In that case volume control

keys are directed to connected audio device.

System Audio Control

Allows an Audio Amplier/Receiver to be used with

the TV. The volume can be controlled using the

remote control of the TV. To activate this feature set

the Speakers option in the System>Settings>More

menu as Amplier. The TV speakers will be muted

and the sound of the watched source will be provided

from the connected sound system.

Note: The audio device should support System Audio Control

feature and CEC option should be set as Enabled.

English - 11 -

TV Menu Features and Functions

System - Picture Menu Contents

3D Settings Press to view 3D settings.

Mode

You can change the picture mode to suit your preference or requirements. The Picture mode can

be set to one of these options: Cinema, Game, Sports, Dynamic and Natural.

Contrast Sets the lightness and darkness values of the screen.

Brightness Sets the brightness value for the screen.

Sharpness Sets the sharpness value for the objects displayed on the screen.

Colour Sets the colour value, adjusting the colors.

Power Save Mode

To set the Power Save Mode as Eco, Picture Off and Disabled.

(When the Mode is Dynamic, Power Save mode is automatically set as disabled.)

Backlight

(Optional)

This setting controls the backlight level. The backlight function will be inactive if the Power

Save Mode is set to Eco. The backlight cannot be activated in VGA, Media Browser mode or

while the picture mode is set to Game.

Noise

Reduction

If the broadcast signal is weak and the picture is noisy, use the Noise Reduction setting to

reduce the amount of noise.

Advanced Settings

Dyanmic

Contrast

You can change the Dynamic Contrast ratio to desired value.

Colour Temp Sets the desired colour tone.

Picture Zoom

Sets the desired picture size from picture zoom menu.

Note: Auto option is only available in Scart mode with SCART PIN8 high voltage/low voltage switching.

Movie Sense

Movie Sense: Press Use “Left” / “Right” to set Movie Sense Low, Med, High or Off. While Movie

Sense is active, it will optimize the TV’s video settings for motional images to acquire a better quality

and readability.When Movie Sense option is set to Low, Med or High, Movie Sense demo option will

be available. If one of these options is selected and if you press OK button, then the demo mode

starts. While demo mode is active, the screen will be divided into two sections, one displaying the

movie sense activity, the other displaying the normal settings for TV screen.

Film Mode

Films are recorded at a different number of frames per second to normal television programmes.

Turn this feature on when you are watching lms to see the fast motion scenes clearly.

Skin Tone Skin tone can be changed between -5 and 5.

Colour Shift Adjust the desired colour tone.

RGB Gain You can congure the colour temperature values using the RGB Gain feature.

HDMI True

Black

While watching from a HDMI source, this feature will be visible in the Picture Settings menu.

You can use this feature to enhance blackness in the picture.

Reset Resets the picture settings to factory default settings.(Except Game Mode)

Autoposition

(in PC mode)

Automatically optimizes the display. Press OK to optimize.

H Position (in

PC mode)

This item shifts the image horizontally to the right hand side or left hand side of the screen.

V Position (in

PC mode)

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock (in

PC mode)

Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive

presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase (in PC

mode)

Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy

picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be

added to the Picture Settings while in PC mode.

English - 12 -

System - Sound Menu Contents

Volume Adjusts the volume level.

Equalizer Selects the equalizer mode. Custom settings can be made only when in user mode.

Balance This setting is used for emphasizing left or right speaker balance.

Headphone Sets headphone volume.

Sound Mode You can select a sound mode (if the selected channel supports).

Audio Link

Press OK to open the Audio Link menu screen. Using this screen you can discover and

connect the sound devices to your TV wirelessly via Bluetooth.

AVL (Automatic

Volume Limiting)

This function sets the sound to obtain xed output level between programmes.

Headphone/Lineout

When you connect an external amplier to your TV using the headphone jack, you can

select this option as Lineout. If you have connected headphones to the TV, set this

option as Headphone.

Surround Sound

(optional)

Surround sound mode can be changed as On or Off.

Bass Gain Controls the bass gain level. Use Left or Right button to set.

Digital Out Sets digital out audio type.

System - Settings Menu Contents

Conditional Access Controls conditional access modules when available.

Language

Congures language settings (may change depending on the country selected)

Preferred and current settings will be available. Current settings can be changed

only if the broadcaster supports.

Parental

Enter correct password to change parental settings. You can easily adjust menu

lock, maturity lock(depending on the country selected) and child lock in this menu.

You can also set a new pin number.

Timers

Sets sleep timer to turn off the TV after a certain time. Sets timers for selected

programmes (USB Record).

Recording

Conguration

Displays the recording conguration menu (Usb connection required).

Date/Time Sets date and time.

Sources Enables or disables selected source options.

Network Settings Displays network settings.

More...: Displays other setting options of the TV set

Menu Timeout Changes timeout duration for menu screens.

Scan Encrypted

Channels

When this setting is on, the search process will locate the encrypted channels as well.

Blue Background Activates or deactivates the blue background system when the signal is weak or absent.

Software Upgrade To ensure that your TV always has the most up to date rmware.

Application Version Displays application version.

Hard of Hearing Enables any special feature sent from the broadcaster.

Audio Description

Audio description refers to an additional narration track for blind and visually impaired

viewers of visual media, including television and movies. You can use this feature, only

if the broadcaster supports that additional narration track.

Note: Audio description sound feature cannot be available in recording or time shifting mode.

English - 13 -

Auto TV Off

You can set the timeout value of the auto off feature. When the timeout value is reached

and the TV has not been operated for a selected time, the TV will go into standby mode.

Standby Search

(Optional)

If the Standby Search is set to On, when the TV is in standby mode, available

broadcasts will be searched. If the TV locates any new or missing broadcasts, a

menu screen will be displayed, asking you whether or not to execute these changes.

The Channel list will be updated and changed after this process.

Store Mode

If you are displaying the TV in a store, you can activate this mode. Whilst Store

Mode is enabled, some items in the TV menu may not be available.

DLNA Renderer

DLNA renderer feature allows you to share les stored on your smartphone or tablet

pc. If you have a DLNA compatible smartphone or tablet pc and the appropriate

software is installed, you can share/play photos on your TV. See instructions of your

sharing software for more information. DLNA renderer mode will not be available

with internet portal feature.

Power Up Mode This setting confrigures the power up mode preference.

Virtual Remote

(optional)

Enable or disable the virtual remote feature.

CEC

With this setting you can enable and disable CEC functionality completely. Press

Left or Right button to enable or disable the feature.

Netix

You can view your ESN(*) number and deactivate Netix.

(*) ESN number is an unique ID number for Netix, created especially to

identify your TV.

Installation Menu Contents

Smart Remote

Press OK to open the Smart Remote menu screen. Using this screen you can

discover and connect the remote controller devices to your TV wirelessly via

Bluetooth.

Automatic Channel

Scan (Retune)

(If available)

Displays automatic tuning options. Digital Aerial: Searches and stores aerial

DVB stations. Digital Cable: Searches and stores cable DVB stations. Analogue:

Searches and stores analogue stations. Digital Aerial & Analogue: Searches

and stores aerial DVB and analogue stations. Digital Cable & Analogue:

Searches and stores cable DVB and analogue stations.

Manual Channel Scan This feature can be used for direct broadcast entry.

Network Channel Scan Searches for the linked channels in the broadcast system.

Analogue Fine Tune

You can use this setting for ne tuning analogue channels. This feature is not

available if no analogue channels are stored.

First Time Installation Deletes all stored channels and settings, resets TV to factory settings.

Clear Service List

(*) This setting is visible only when the Country option is set to Denmark, Sweden,

Norway or Finland. Use this setting to clear channels stored.

English - 14 -

The TV sorts all stored stations in the Channel List.

You can edit this channel list, set favourites or set

active stations to be listed by using the Channel List

options.

ConguringParentalSettings

To prohibit viewing of certain programmes, channels and

menus can be locked by using the parental control system.

To display parental lock menu options, the PIN number

should be entered. The factory default PIN number is

0000. After coding the correct PIN number, parental

settings menu will be displayed.

Menu Lock: Menu lock setting enables or disables

the menu access.

Maturity Lock: When set, this option gets the maturity

information from the broadcast and if this maturity

level is disabled, disables access to the broadcast.

Child Lock: When Child Lock is set, the TV can only

be controlled by the remote control. In this case the

control panel buttons will not work.

Set PIN: Denes a new PIN number.

Note: If the Country option is set to France, you can use 4725

as the default code.

Electronic Programme Guide (EPG)

Some, but not all channels send information about

the current and next programmes. Press the EPG

( ) button to view the EPG menu.

Up/Down/Left/Right: Navigate EPG.

OK: Displays programme options.

INFO: Displays, in detailed, information on the

programme selected.

GREEN: Switches to List Schedule EPG.

YELLOW: Switches to Timeline Schedule EPG.

BLUE: Displays ltering options.

(RECORD): The TV will start to record the selected

progamme. You can press again to stop the recording.

IMPORTANT: Connect a USB disk to your TV while the TV

is switched off. You should then switch on the TV to enable

the recording feature.

Note: Switching to a different broadcast or source is not

available during a recording.

Programme Options

In EPG menu, press the OK button to enter the

Event Options menu.

Select Channel

In EPG menu, using this option, you can switch

to the selected channel.

General TV Operation

Using the Channel List

Record / Delete Record Timer

After you have selected a programme in the

EPG menu, press the OK button. Select the

Record option and press the OK button. After

this operation, a recording will be scheduled for

the selected programme.

To cancel an already set recording, highlight that

programme and press the OK button and select

the option Delete Rec. Timer. The recording will be

cancelled.

Set Timer / Delete Timer

After you have selected a programme in the EPG

menu, press the OK button. Select the Set Timer

on Event option and press the OK button. You

can set a timer for future programmes. To cancel

an already set timer, highlight that programme and

press the OK button. Then select “Delete Timer”

option. The timer will be cancelled.

Note: It is not possible to record two channels at the

same time.

Using the 3D Mode

Precautions

For your safety ; Read these safety precautions

carefully before using the 3D function.

• You may experience discomfort, headaches

or dizziness while watching 3D images. If you

experience such symptoms, you should remove 3D

glasses and stop watching 3D mode.

• Do not watch in 3D mode for long periods of time.

Allow yourself occasional rests. During viewing, if

you experience any discomforts such as eye-strain,

headache or nausea; take off the 3D glasses and

stop watching in 3D mode. Consult a doctor if the

discomforts persist.

• It is recommended that an adult should check on

children, including teenagers because they may be

more sensitive to the effects of watching 3D. If they

experience similar discomforts mentioned above,

have them stop watching in 3D immediately.

• Do not use the 3D Glasses as sunglasses or general

eyeglasses.

• Do not move around while watching in 3D and

wearing the glasses as your vision is modied and

you may run into objects which may result in injuries.

• Use only the supplied 3D glasses.

• If you experience screen ickering when watching

3D images in poor light conditions, you should turn

the lamp off or dim the light.

• While wearing headphones do not adjust the volume

to excessive levels as this may result in temporary

or permanent hearing loss.

English - 15 -

CAUTION - 3D Images

• Read these safety instructions carefully to prevent

damage.and ensure your personal safety.

• Consult an optometrist if you experience any

diffictulties while watching in 3D with your 3D

glasses.

• You may experience headaches or fatigue when

viewing 3D images with your 3D glasses for too long.

• If you experience headaches, fatigue, or dizziness,

stop watching immediately.

The following people should not use the 3D Mode:

• Pregnant women, seniors, people with heart

conditions, as well as people who can get easily

nauseous

• When watching in 3D be aware of your surroundings.

Do not watch in an environment with breakable

objects nearby.

• Use 3D Glasses for watching 3D video only. Do not

use them as sunglasses or reading glasses.

• Do not apply spray cleaners directly onto the surface

of the 3D Glasses.This may result in discoloration

and cracks and may cause the screen display to

peel off.

• Make sure the cleaning cloth is soft and does not

contain any foreign material or dust. Using a dirty

cloth will damage your 3D glasses.

• Do not drop or bend the 3D glasses.

• If the receiving range is out of the specied range,

the screen may not be viewable as 3D video.

Health Warning! - 3D Images

• When watching 3D images, you should leave a

distance of at least twice the screen width between

you and the screen, and you should keep the screen

at eye level.

• Do not watch 3D images too closely or for long

periods of time. This may cause drowsiness, fatigue

and / or eye damage. If you experience these

problems stop watching in 3D immediately. Pregnant

women, seniors, people with heart problems

or people who experience frequent drowsiness

should refrain from watching 3D. Some content in

3D may cause the viewer to perform sudden reex

movements such as ducking or dodging; therefore

it is important to not place any fragile objects near

the television. Please prevent children under the

age of 5 from watching 3D. It may affect their vision

development.

Photosensitive Seizure Warning

• If you or a member of your family has a history of

epilepsy or seizure, please consult with your doctor

before watching 3D TV. It is possible that some

viewers may experience a seizure or epilepsy when

exposed to certain conditions, including ashing

lights or images in TV or video games.

• Sometimes certain symptoms can occur in

unspecied conditions even if you do not have any

previous history. In such a case, if you experience

any of the following symptoms, immediately stop

watching the 3D TV and consult a doctor: altered

vision, visual or facial instability, such as eye or

muscle twitching, dizziness or light-headedness,

visual transition or unconscious action, convulsion,

loss of conscience, confusion or disorientation, loss

of directional sense, cramps, or nausea.

• When watching 3D TV, monitor your children,

including teenagers because they may be more

sensitive to the effects of watching 3D such as

these symptoms.

• You can reduce the risk of photosensitization seizure

by taking the following actions:

• While watching the 3D TV, do take frequent breaks.

If you have vision that is different in each eye, you

should watch the TV after taking vision correction

measures.

• Do not watch the TV too closely and try always keep

the television at eye level. Do not watch the 3D TV

when you are tired or sick. Avoid watching the 3D

TV for a long period of time.

• Do not use the 3D glasses for other purposes.

• Some viewers may feel disoriented aer watching

3D. Therefore, after you watch 3D, take a moment

to regain awareness of your surrounding before

moving.

• You must look straight ahead and the TV must be at

eye level while wearing the 3D glasses. The picture

may not be visible or may look dark if you do not

stay within the viewing angle.

Operating the 3D Mode

• The 3D picture may not be visible or become

distorted when watching under intense light

conditions.

• You can enjoy viewing 3D images on your TV by

wearing the supplied 3D Glasses. Note that this TV’s

3D feature works only with its specic 3D glasses.

• Connect a 3D compatible player via a HDMI cable

and play the 3D content. Refer to the players manual

for settings.

• Press the “SOURCE - ” button and select the

connected input.

• You should select suitable 3D Mode before viewing.

• To view 3D contents or programmes in 3D mode you

must wear the supplied 3D Glasses.

3D Mode

Press the MENU button and select the Picture icon

using the “ ” or “ ” buttons and press OK. Use “

” or “ ” to select 3D settings and press OK to view.

English - 16 -

• 3D feature enables you to view 3D content using

the supplied 3D glasses.

• To enable and customize 3D mode on the TV,

perform the following:

• Press MENU button on the remote control and select

Picture by using “ ” or “ ” button. Press OK button

to view Picture Settings. Select 3D Settings option

by using “ ” or “ ” button and press OK.

3D Settings

Mode

You can customize the 3D mode settings to provide

the best viewing experience.

Select one of these modes to experience 3D image

viewing:

Auto: Automatically switches to 3D mode if 3D

information is detected from a digital broadcast or a

HDMI source.

Side by Side: Displays 3D content which is originally

in a form of side by side.

Top bottom: Displays 3D content which is originally

in a form of top and bottom.

Off: 3D function mode is turned off.

2D Only

If content is 3D but you want to watch it in 2D, you can

switch to 2D only mode. There are 2 options (LEFT

and RIGHT) to select which side of the content you

want to watch in 2D.

Virtual 3D

Conversion from 2D to 3D. You can adjust the eld of

depth to various settings or turn it off.

Left/Right Swap

You can use this setting to shift the phase of the 3D

left/right broadcast.

3D Depth Sense (optional)

This setting enables the control of 3D depth.

3D Viewing Information

Refer to the size / distance guidelines below to

experience 3D in the best possible way.

Viewing Distance

Size (inch)

50 55 55 UHD 65 84

Viewing distance (m)

1,80 3,25 4,5 2,40 3,00

Horizontal Viewing Angle

Vertical Viewing Angle

It is strongly recommended that the TV is placed at

a height as same as the eye level of the viewer. In

case that is not possible, tilt the TV accordingly in its

stand or wall mount.

English - 17 -

3D Viewing Information - continued

HDMI MBV MBP

1080p@24 FP

Supported Not Supported Not Supported

720p@50 FP

Supported Not Supported Not Supported

720p@60 FP

Supported Not Supported Not Supported

1080p FC

SBS, TB SBS, TB SBS, TB

720p FC

SBS, TB SBS, TB SBS, TB

1080i FC

SBS SBS SBS

OTHER

Not

Supported

Not Supported (*)

DTV ATV OTHER

1080p@24 FP

Not

Supported

Not Supported Not Supported

720p@50 FP

Not

Supported

Not Supported Not Supported

720p@60 FP

Not

Supported

Not Supported Not Supported

1080p FC

SBS, TB Not Supported SBS, TB

720p FC

SBS, TB Not Supported SBS, TB

1080i FC

SBS Not Supported SBS

OTHER

(*) Not Supported Not Supported

Please note that if you apply 720p FC TB input; the picture

will be scaled smaller than the original size in the middle

of the screen.

SBS: Side By Side

TB: Top Bottom

MBP: Media Browser Picture

MBV: Media Browser Video

FC: Frame Compatible

FP: Frame Pack

in MBP: Supported only when, the image’s height is

multiples of 2 and the image’s width is multiples of 16 and if

the image width is equal to the panel width or wider.

in DTV: Supported only when, the image’s height is between

1700 and 1900 and the image’s width is equal to 1280 or 720.

(*): Not supported if the image provides 1080i resolution.

3D Bluetooth Active Shutter Glasses

Contents in the box

3D Glasses x 2

CR1620 x 2

Battery

CR 1620

Operating Instructions

User’s

Manual

Glasses

cloth

Safety Precautions

Some viewers mat experience a seizure or blackout

when exposed to certain ashing images or lights

contained in certain 3D television pictures or video

games.

Anyone who has had a seizure, loss of awareness, or

other symptoms linked to an epilectic condition, or has

a family history of epilepsy, should contact a health

care provider before using the 3D function.

• We do not recommend the use of 3D devices

for children under 6 years of age and strongly

discourage from use of 3D devices for children under

3 years of age.

• Please clean the 3D glasses periodically with some

kind of sanitising cleaning product.

• Please do not use benzene, paint thinner, alcohol,

water, or abrasive cleaners, which may damage

the 3D glasses.

• If you are ill or feel ill, you should refrain from viewing

3D images, and consult your health care provider

as may be appropriate.

Fore more information, please carefully read cautions

in “3D Mode” section described in the TV owners

manual.

Warning

DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD.

• The product contains a coin cell battery. If the coin cell

battery is swallowed, it can cause severe internal burns in

just 2 hours and can lead to death.

• Keep new and used batteries away from children. If the

battery compartment does not close securely, stop using

the product and keep it away from children.

• If you think batteries might have been swallowed or placed

inside any part of the body, seek immediate medical

attention.

• Do not repair, modify, or disassemble the 3D glasses by

yourself.

Doing so may cause a re or cause you to become

indisposed while viewing 3D images.

• Do not expose the glasses to excessive heat such as

sunshine,re,orthelike.

• If the 3D glasses become extremely hot or emit an unusual

odor or smoke during use, turn off the power immediately.

Continuing to use them may cause cracking or re.

English - 18 -

Wait until they cool down, and contact the shop

where you purchased the product.

• Do not nail, hammer, or step on the battery.

Doing so may cause a short circuit, leading to

overheating, cracking, or re.

• Do not overheat, disassemble, or short-circuit the battery,

orthrowitintore.

Doing so may cause cracking or re.

• Do not connect the battery with metal items such as wires.

Also, do not carry or store the battery with metal items such

as necklaces or hairpins.

Doing so may cause a short circuit, leading to

overheating, cracking, or re.

Caution

About handling the 3D glasses

• Do not wear the 3D glasses for any purpose other than

viewing 3D programming.

3D glasses do not function as sunglasses.

• Do not use the 3D glasses if they are not working properly

or broken.

Continuing to use them in such a state may cause

injury, eye strain, or indisposition.

• Do not stand or walk while wearing 3D glasses.

You may lose your balance which could result in falls

or other accidents.

• Do not scratch the surface of the lenses with sharp objects.

• Do not drop or bend the 3D glasses.

• If your nose or temple turns red, or you feel pain or

discomfort, stop using the 3D glasses.

Such symptoms as above may occur if you keep

wearing them for a long time, which may also cause

indisposition.

• Becareful not to pinchyour ngers in thehinge of the

3D glasses.

3D Glasses

LCD Lens

Spring

clasp

Power button

/ LED light

Battery lid

Glasses Pairing Operation Instruction

These 3D Active glasses use Bluetooth wireless

technology. It is recommended to pair the TV to

the glasses before using to view 3D, as to prevent

interference from other Bluetooth devices. After

pairing the glasses will only work with the TV they

are paired to. There is no need to repeat this process

once successful pairing is complete unless you wish

to use with another TV.

To pair the glasses and TV:

1. Ensure TV is in 3D mode and glasses are

within 0.5M of the TV.

2. In power on or power off state, press the power

button for 3 seconds. The LED light will ash

red and green whilst pairing is in progess.

Pairing success is indicated by the 3D glasses

shutters operating normally and the 3D content

can be viewed.

3. If the glasses cannot successfully pair with the

TV, the LED indicator will light red. If this is the

case, repeat steps 1 and 2 above.

Replacement of battery

• Push the spring clasp to the left, at the same time

move the battery lid up as indicated in picture 1.

• Pull the battery lid up. Install or replace the battery

as indicated in picture 2 observing correct polarity.

• Close the battery lid as shown in picture 3.

picture 1 picture 2 picture 3

Operation Instruction and

Function of Power LED Light

Power on

• Ensure TV is in 3D mode

• Press the power button on the glasses

• The LED light will ash red. Glasses are now in

ON state

Power off

• Press the power button on the glasses

• The LED light will ash red. Glasses are now in

OFF state

Automatic Power off

If the glasses do not receive a Bluetooth signal from

the TV within 3 seconds, the glasses will automatically

shutdown, indicated by the LED light ashing red.

Low battery power

If the battery power is low, the LED light will ash

every 2 seconds and/or the glasses shutter will

work abnormally. In this case replace the battery as

indicated in the above section.

To ensure better 3D vision experience, please watch within

thesuggestedviewingrange(Pairingrange≤0.5M).

Horizontal

view

ViewRange1-10m

English - 19 -

Standard Specication

3D method Liquid Crystal Shutter

Dimensions Width: 147 mm

Height: 39 mm

Depth: 154 mm

Operating temperature: 0°C - 40°C

Weight(includingbattery): 28g ± 2g

Material Frame: Resin

Lens: Liquid crystal glass

Battery: CR1620; Battery life: 40hr +/- 5hr

The battery operating time may become shorter

depending on the

usage condition or environment.

Pairing range: < 0.5 m

Viewing range: 1-10 m

Thespecicationmaychangewithoutnotice.

We herby declares that this product with an integrated

Wireless Function is in compliance with the essential

requirements and other relevant provisions of

Directive 1999/5/EC..

EU Conformity Statement

This product is carrying the CE-Mark in

accordance with the related European

Directives.

This product is labeled with the CE Mark in

accordance with the related European Directives,

notably Low Voltage Directive 2006/95/EC,

Electromagnetic Compatibility Directive 2004/108/

EC and RoHS Directive 2011/65/EU.

The following information is only for EU-member

states:

Disposal...

The following information is only for EU-member

states:

Disposal of products

The crossed out wheeIed dust bin symbol

indicates that products must be collected

and disposed of separately from household

waste. Integrated batteries and accumulators

can be disposed of with the product. They will be

separated at the recycling centres.

The black bar indicates that the product was placed

on the market after August 13, 2005.

By participating in separate collection of products and

batteries, you will help to assure the proper disposal

of products and batteries and thus help to prevent

potential negative consequences for the environment

and human health.

Disposal of batteries and/or accumulators

The crossed out wheeled dust bin symboI

indicates that batteries and/or accumulators

must be collected and disposed of separately

from household waste.

If the battery or accumulator contains more than the

specied values of lead (Pb), mercury (Hg), and/

or cadmium (Cd) dened in the European Battery

Directive, then the chemical symbols for lead (Pb),

mercury (Hg) and/or cadmium (Cd) will appear below

the crossed out wheeled dust bin symbol.

By participating in separate collection of batteries, you

will help to assure the proper disposal of products and

batteries and thus help to prevent potential negative

consequences for the environment and human health.

Licence information

The Bluetooth® word, mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use

of such marks is under license.

Connectivity Functions

Wired Connectivity

To Connect to a Wired Network

• You must have a modem/router connected to an

active broadband connection.

• Connect your PC to your modem/router. This can

be a wired or wireless connection.

• Connect your TV to your modem/router via an

ethernet cable. There is a LAN port at the rear

(back) of your TV.

Broadband ISP

connection

LAN (ethernet)

cable

LAN input on the rear

bottom side of the TV

• You will need to set up DLNA network to access

and play shared les, you must select the Media

Browser. Press the Menu button and select Media

Browser. Press OK to continue. Select the desired

le type and press OK. You must always use the

Media Browser screen to access and play shared

network les.

• PC/HDD/Media Player or any other devices that are

DLNA 1.5 compatible should be used with a wired

connection for higher playback quality.

English - 20 -

ConguringWiredDeviceSettings

Network Type

The Network type can be selected as Wired or Wireless,

in accordance with the active connection to the TV set.

Select this as “Wired” if you are connecting via an

ethernet.

CongurationStatus

This section displays the status of the connection.

IP Address

If an active connection is available, the IP address will

be displayed on this section. If you want to congure an

IP address preferences, press the GREEN button and

switch to the advanced mode.

ConguringWiredNetworkSettingsin

Advanced Mode

After pressing the GREEN button, the “Advanced

mode” will be available. While in Advanced Mode,

press the RED button to edit settings. When nished,

press OK to save, Press RETURN/BACK to cancel.

Wireless Connectivity

To Connect to a Wireless Network

• You must have a modem/router connected to an

active broadband connection.

• To congure your wireless settings please refer

to the Network settings section in this manual.

Broadband

ISP

connection

Wireless LAN

adaptor

USB inputs

on the rear

side of the TV

• A Wireless-N router (IEEE 802.11a/b/g/n) with

simultaneous 2.4 and 5 GHz bands is designed

to increase bandwidth. These are optimized for

smoother and faster HD video streaming, file

transfers and wireless gaming.

• Use a LAN connection for quicker file sharing

between other devices like computers.

• The frequency and channel differ depending on the area.

• The transmission speed differs depending on the

distance and number of obstructions between the

transmission products, the conguration of these

products, the radio wave conditions, the line trafc

and the products that you use. The transmission may

also be cut off or may get disconnected depending

on the radio wave conditions, DECT phones or any

other WiFi 11b appliances. The standard values of

the transmission speed are the theoretical maximum

values for the wireless standards. They are not the

actual speeds of data transmission.

• The location where the transmission is most effective

differs depending on the usage environment.

• The Wireless LAN adaptor supports 802.11 a,b,g &

n type modems. It is highly recommended that you

should use the IEEE 802.11n communication protocol

in order to avoid any possible problems while watching

videos.

• You must change your modem’s SSID when there are

any other modems around with the same SSID. You

can encounter connection problems otherwise. Use

a wired connection if you experience problems with a

wireless connection.

•ConguringWirelessDeviceSettings

To enable Wi-Fi features, open the Network Settings

menu and select Network Type as Wireless Device

to start connection process.

Press the YELLOW button to scan the wireless

networks. A list of available networks will be displayed.

Please select your desired network from the list.

Note: If the modem supports N mode, you should set

N mode settings.

If the selected network is protected with a password,

please enter the correct key by using the virtual

keyboard. You can use this keyboard via the navigation

buttons and the OK button on the remote control.

Wait until the IP address is shown on the screen.

This means that the connection is now established. To

disconnect from a wireless network highlight “Network

Type” and press OK.

You can navigate between menu tabs by pressing left/

right buttons. The help bar on the bottom of the dialog

shows features that you may use. Press the BLUE

button to check your internet connection speed. Press

the GREEN button to switch to advanced mode and

then press the OK button to edit settings.

You can check the signal strenght by using the network

settings menu for the wireless device mode.

Other Information

Configuration Status: Displays Wi-Fi status as

connected or not connected.

IP Address: Displays the current IP address.

Network Name: Connected networks’ name will be

displayed.

DeleteSavedWi-FiProles

Saved proles will be deleted if you press the RED button

while the wireless device selection OSD is on the screen.

Connecting to your mobile device via WiFi

• If your mobile device has WiFi feature, you can connect

it to your TV via a router, in order to access the content

in your device. For this, your mobile device must have

an appropriate sharing software.

English - 21 -

• Connect to your router following the steps stated above

in the “Wireless Connectivity” section.

• Afterwards, engage your mobile device with the router

and then activate the sharing software on your mobile

device. Then, select les that you want to share with

your TV.

• If the connection is established correctly, you will be

able to access the shared les from your mobile device

via the Media Browser of your TV.

• Enter the Media Browser menu and the playback

device selection OSD will be displayed. Select your

mobile device and press the OK button to continue.

• If available, you can download a virtual remote

controller application from the server of your mobile

device application provider.

Note: This feature may not be supported on all mobile devices.

Wireless Display

Wireless Display is a standard for streaming video and

sound content by Wi-Fi Alliance. This feature provides

the ability to use your TV as wireless display device.

Using with mobile devices

There are different standards which enable sharing of

screens including graphical, video and audio content

between your mobile device and TV.

Then press the Source button on the remote and

switch to Wireless Display source.

A screen appears stating that the TV is ready for

connection.

Open the sharing application on your mobile device.

These applications are named differently for each

brand, please refer to the instruction manual of your

mobile device for detailed information.

Scan for devices. After you select your TV and

connect, the screen of your device will be displayed

on your TV.

Note: This feature can be used only if the mobile

device supports this feature. Scanning and connecting

processes differ according to the programme you

use. Android based mobile devices should have the

software version V4.2 and above.

Bluetooth Connectivity

Your TV supports Bluetooth technology. Pairing is

required before using the Bluetooth devices with

the TV set. You should do the followings to pair your

device with the TV:

*Set the device to pairing mode

*Start device discovery on the TV

Note: Refer to the user manual of the Bluetooth

device to learn how to set the device to pairing mode.

You can connect audio devices or remote controllers

via Bluetooth to your TV. For audio devices you should

use the Audio Link option in the System>Sound

menu, for remote controllers the Smart Remote

option in the System>Settings>More menu. Select

the menu option and press the OK button to open

the related menu. Using this menu you can discover

and connect the devices that use Bluetooth wireless

technology and start to use them. Follow the on-

screen instructions. Start the device discovery. A

list of available bluetooth devices will be displayed.

Select the device you want to connect from the list

and press the OK button to connect. If “Device

connected” message is displayed, the connection

is successfully established. If the connection fails try

it again.

Connectivity Troubleshooting

Wireless Network Not Available

• Ensure that any rewalls of your network allow the

TV wireless connection.

• Try searching for wireless networks again, using the

Network Settings menu screen.

If the wireless network does not function properly,

try using the wired network in your home. Refer to

the Wired Connection section for more information

on the process.

If the TV does not function using the wired connection,

check the modem (router). If the router does not

have a problem, check the internet connection of

your modem.

Connection is Slow

See the instruction book of your wireless modem to

get information on the internal service area, connection

speed, signal quality and other settings. You need to

have a high speed connection for your modem.

Distruption during playback or slow

reactions

You could try the following.

Keep at least three meters distance from microwave

ovens, mobile telephones, bluetooth devices or any

other Wi-Fi compatible devices. Try changing the active

channel on the WLAN router.

Using DLNA Network Service

DLNA (Digital Living Network Alliance) is a standard

that eases the viewing process of digital electronics and

makes them more convenient to use on a home network.

For further information, visit www.dlna.org.

The DLNA standard allows you to view and play photos,

music and videos stored in the DLNA media server

connected to your home network.

1. Media Home Installation

The DLNA function cannot be used if the server

program is not installed onto your PC. Please prepare

your PC with the provided Media Home programme.

For more information about the installation, please

refer to the Windows Media Server.

English - 22 -

2. Connect to a Wired or Wireless Network

See the chapter Network Settings for detailed conguration

information.

3. Play Shared Files via Media Browser

Select Media Browser by using the Left or Right

buttons from the main menu and press OK. The Media

browser will then be displayed.

DLNA

DLNA support is only available in the Media Browser

folder mode. To enable folder mode, go to the Settings

tab in the main media browser screen and press OK. In

the settings options, highlight View Style and change to

Folder using the Left or Right buttons. Select the desired

media type and press OK.

If sharing congurations are set properly, an OSD

message will be displayed after selecting the desired

media type. Select OK to display the selected network

or USB memory content. If you want to refresh the

device list, press the GREEN button. You can press

MENU to exit.

If available networks are found, they will be listed on

this screen. Select media server or network that you

want to connect to using the “ ” or “ ” buttons and

press OK.

If you select the media type as Video and choose a

device from the selection menu, a new menu screen

will appear on the screen.

Select Videos from this screen to list all the available

video les from the selected network.

To play other media types from this screen, you must

go back to main Media Browser screen and select the

media type as desired and then perform the network

selection again. Refer to the Media Browser USB

Playback section for further information on le playback.

Subtitle les do not work if you watch videos from your

network through DLNA.

You can connect only one television with DLNA to

the same network. If a problem occurs with the DLNA

network, please switch your television off at the wall

socket and back on again. Trick mode and jump are

not supported with the DLNA function.

Note: There may be some PC’s which may not be able

to utilize the DLNA function due to administrator and

security settings (such as business PC’s).

For best home network streaming with this TV, the

supplied Nero software should be installed.

Internet Portal

Ensure the TV is connected to a Wired/Wireless

Internet connection. After the connection is

established, you can select or view portal options.

Note: A Broadband internet connection is required

for high quality viewing. Ensure that the internet

connection is made properly. You must set the

Country and Language data correctly in the First

Time Installation for the proper operation of the

internet portal.

Press “ ” button on your remote control and the

portal application options will be displayed in a

manner similar to the template below.

Note on PIP Window

If you switch to portal mode while watching TV

channels, current programme will be displayed on

the PIP window. You can change channels using

P+/P- buttons.

Current HDMI content will be displayed on the PIP

window, if you switch to portal mode while watching

HDMI source.

Use the “ ” or “ ”, “ ” or “ ” to navigate between

the items on Portal screen. Press the OK button to

conrm your selection. Press the BACK button to go

to the previous screen.

Press the EXIT button to quit the Internet portal mode.

Note: Possible application dependent problems may

be caused by the content service provider.

English - 23 -

iPlayer Application

You can access BBC iPlayer using your TV. To do

this, an active internet connection is required. (See

connecting to a Wired/Wireless Network section to

connect your TV to internet). After the connection is

established, you can select BBC iPlayer among the

portal options. (See Internet Portal)

Press the OK button on your remote control to start

the BBC iPlayer application.

Note: Broadband internet connection (minumum

2mbps) is required for high quality viewing.

Playing a Programme via iPlayer

Select a programme and press OK button. The

programme playback will begin.

You can press the PAUSE button to pause playback.

Press the PLAY button to resume the playback.

Use the STOP button to stop the playback.

Press the EXIT button to exit iPlayer. Press the

RETURN button for going back to the previous screen.

Note: “Episode is unavailable.” message may be

displayed on the screen if a problem occurs during

the playback.

Searching a Programme

Highlight the Search tab using the navigation buttons

and press the OK button. Use the virtual keyboard

to type the letters. Select letters and press the OK

button. When nished, highlight Search option and

press the OK button.

English - 24 -

Internet Browser

Refresh

Quick Access

Home Page

Address Bar

Add

History

Bookmarks

Zoom

Settings

Remote control shortcuts

(Zoom in-out/Back/Home)

• To navigate the web browser, use the arrow buttons

on the remote control. Press OK to continue.

• After First time installation, predened web sites and

logos will be displayed on the browser’s access page

(see image above). To add a desired web page to

the quick access page, whilst on the website you

wish to add, select the “Add” menu and select “Quick

Access” button.

• If you want to add bookmarks, select this item while

the desired web page is on the screen.

Quick

Access

Add

Bookmarks

• You can navigate the web browser in three ways.

First, enter any URL in the address bar.

• You can search keywords by clicking the search

button in the address dialog box or another way

to navigate to pages is by clicking on links on web

pages and these will take you to the appropriate

pages.

• When you scroll the pointer down to the middle of the

screen, the remote control’s shortcuts will be shown.

• Use the zoom shortcut buttons or the zoom menu

to zoom in or zoom out.

• You can clear cookies or clear all browser data from

the settings menu.

• Your TV is compatible with USB mice. Plug your

mouse or wireless mouse adaptor to the USB

input of your TV.

• To view your browsing history, click the history

button. You can also clear your browsing history

from here.

• The browser does not support multiple tabs.

• Some internet pages include ash content. These

are not supported by the browser.

• Your TV does not support any download processes

from the web browser.

To use the internet browser, please select the internet browser logo from the portal section.

English - 25 -

Troubleshooting&Tips

Tv will not turn on

Make sure the power cord is plugged in securely to

wall outlet. The batteries in the remote control may be

exhausted. Press the Power button on the TV.

Poor picture

• Have you selected the correct TV system?

• Low signal level can cause picture distortion.Please

check antenna access.

• Check if you have entered the correct channel

frequency if you have done manual tuning.

• The picture quality may degrade when two devices

are connected to the TV at the same time. In such

a case, disconnect one of the devices.

No picture

• No Picture means that your TV is not receiving a

transmission. Have you selected the correct button on

the remote control? Try once more. Also make sure

the correct input source has been selected.

• Is the antenna connected properly?

• Is the antenna cable damaged?

• Are suitable plugs used to connect the antenna?

• If you are in doubt, consult your dealer.

No sound

• Has the TV been set to mute? To cancel mute, press the

“ ” button, or increase the volume level.

• Are Headphones plugged into the TV.

• Sound is coming from only one speaker. Is the balance

set to one extreme? See Sound Menu section.

Remote control does not operate

• The batteries may be exhausted. Replace the

batteries with fresh ones.

Input sources can not be selected

• If you cannot select an input source, it is possible that

input has been disabled. Select Settings, Sources to

enable source which may have been disabled.

Recording unavailable

To record a programme, you should rst connect a

USB disk to your TV while the TV is switched off.

You should then switch on the TV to enable recording

feature. If you cannot record, try switching off the TV

and then re-inserting the USB device.

USB is too slow

If a “USB is too slow” message is displayed on the

screen while starting a recording, try restarting the

recording. If you still get the same error, it is possible

that your USB disk does not meet the speed

requirements. Try connecting another USB disk.

Software Upgrade

Your TV is capable of nding and updating automatically

via the Aerial/Cable signal or over the Internet.

Software upgrade search via user interface

Simply navigate on your main menu. Choose Settings

and select Other Settings menu. In Other Settings

menu navigate on to the Software for Upgrade item and

press OK button to check for a new software upgrade.

Note : Internet connection is needed. If an internet

connection is not available, try to upgrade via

broadcast. If a new upgrade is found, it starts to

download the upgrade. Press OK to continue with

the reboot operation.

3 AM search and upgrade mode

While the TV is connected to an aerial signal. If

Automatic scanning in the Upgrade Options menu

is enabled, the TV wakes up at 03:00 and searches

broadcast channels for new software upgrades. If

new software is found and downloaded successfully,

the next time the TV powers up , it will have the new

software version.

Note: If the TV fails to come on after the upgrade unplug the

TV for 2 minutes and plug in again.

English - 26 -

Nero MediaHome Installation

To install Nero MediaHome, please proceed as

follows:

Note: To use DLNA function, this software should be installed

to your PC.

1. Enter the link below completely in the adress-bar

of your web browser.

http://www.nero.com/mediahome-tv

2. Click the Download button on the opening page.

The installation le will be downloaded onto your

PC.

3. After the download is completed, double click on

the installation le to start the installation. The

installation wizard will guide you through the

installation process.

4. The prerequisites screen will be displayed rst.

The installation wizard checks the availability

of required third-party software on your PC. If

applications are missing they are listed and must

be installed before continuing installation.

5. Click the Install button. The integrated serial will

be displayed. Please do not change the displayed

serial.

6. Click the Next button. The License Conditions

(EULA) screen will be displayed. Please read

the license agreement carefully and select the

appropriate check box if you agree to the terms of

the agreement. Installation is not possible without

this agreement.

7. Click the Next button. On the next screen you can

set your installation preferences.

8. Click the Install button. The installation begins

and nishes automatically. A progress bar will

indicate the state of the installation process.

9. Click the Finish button. The installation is

completed. You will be directed to the web site of

the nero software.

10. A shortcut is now placed on your desktop.

You have successfully installed Nero MediaHome

on your PC.

Run Nero MediaHome by double clicking on the shortcut

icon.

English - 27 -

AV and HDMI Signal Compatibility

Source Supported Signals Available

EXT

(SCART1)

PAL O

NTSC 60 O

RGB 50/60 O

SECAM O

Side AV

PAL 50/60 O

NTSC 60 O

SECAM

YPbPr

480I, 480P 60Hz O

576I, 576P 50Hz O

720P 50Hz,60Hz O

1080I 50Hz,60Hz O

HDMI 1

HDMI 2

HDMI 3

HDMI 4

480I 60Hz O

480P 60Hz O

576I, 576P 50Hz O

720P 50Hz,60Hz O

1080I 50Hz,60Hz O

1080P

24Hz,

25Hz

30Hz,

50Hz,

60Hz

(X: Not Available, O: Available)

In some cases a signal on the LCD TV may not be displayed

properly. The problem may be an inconsistency with

standards from the source equipment (DVD, Set-top box, etc.

). If you do experience such a problem please contact your

dealer and also the manufacturer of the source equipment.

PC Input Typical Display Modes

The following table is an illustration of some of the

typical video display modes. Your TV may not support

all resolutions. Your TV supports up to 1920x1200.

Index Resolution Frequency

1 640x400 70Hz

2 640x350 85Hz

3 640x400 85Hz

4 640x480 60Hz

5 640x480 66Hz

6 640x480 72Hz

7 640x480 75Hz

8 640x480 85Hz

9 800x600 56Hz

10 800x600 60Hz

11 800x600 70Hz

12 800x600 72Hz

13 800x600 75Hz

14 800x600 85Hz

15 832x624 75Hz

16 1024x768 60Hz

17 1024x768 66Hz

18 1024x768 70Hz

19 1024x768 72Hz

20 1024x768 75Hz

21 1024x768 85Hz

22 1152x864 60Hz

23 1152x864 70Hz

24 1152x864 75Hz

25 1152x864 85Hz

26 1152x870 75Hz

27 1280x768 60Hz

28 1360x768 60Hz

29 1280x768 75Hz

30 1280x768 85Hz

31 1280x960 60Hz

32 1280x960 75Hz

33 1280x960 85Hz

34 1280x1024 60Hz

35 1280x1024 75Hz

36 1280x1024 85Hz

37 1400x1050 60Hz

38 1400x1050 75Hz

39 1400x1050 85Hz

40 1440x900 60Hz

41 1440x900 75Hz

42 1600x1200 60Hz

43 1680x1050 60Hz

44 1920x1080 60Hz

45 1920x1200 60Hz

English - 28 -

Supported File Formats for USB Mode

Media Extension Format Notes

Video .dat, .mpg,

.mpeg

Mpeg1-2 1080P@30fps - 50Mbit/sec

.ts, .trp,

.tp, .m2ts

MPEG2 , H.264,

VC1, AVS, MVC

H.264:1080Px2@25fps, 1080P@50fps MVC:1080P@ 24fps Other: 1080P@30fps -

50Mbit/sec

.vob MPEG2 1080P@30fps 50Mbit/sec

.mkv MPEG1-2-4,

H.264

H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps - 50Mbit/sec

.mp4 MPEG4, XviD,

H.264

H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps - 50Mbit/sec

.avi MPEG2-4, Xvid,

H.264

H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps - 50Mbit/sec

.a, .v H.264, Sorenson

H.263

H.264:1080Px2@25fps, 1080P@50fps, 1080P@30fps - 40Mbit/sec

.3gp MPEG4, H.264 1920x1080@30P 20Mbit/sec

.asf, .wmv VC1 1080P@30fps - 50Mbit/sec

Audio .mp3 MPEG1/2 Layer

1/2/3 (MP3)

Layer1: 32Kbps ~ 448Kbps (Bit rate) / 16KHz ~ 48KHz (Sampling rate)

Layer2: 8Kbps ~ 384Kbps (Bit rate) / 16KHz ~ 48KHz (Sampling rate)

Layer3: 8Kbps ~ 320Kbps (Bit rate) / 16KHz ~ 48KHz (Sampling rate)

.wav LPCM

.WMA/

ASF

WMA, WMA Pro WMA: 128bps ~ 320Kbps (Bit rate) / 8KHz ~ 48Khz (Sampling rate)

WMA Pro: < 768kbps (Bit rate) / ~ 96KHz (Sampling rate)

.m4a/ .aac AAC, HEAAC Free Format (Bit rate) / 8KHz ~ 48KHz (Sampling rate)

.pcm PCM 8Kbps ~ 320Kbps (Bit rate) / 16KHz ~ 48KHz (Sampling rate)

(works

only with

video

les)

AC3 32Kbps ~ 640Kbps (Bit rate) / 32KHz, 44.1KHz, 48KHz (Sampling rate)

EAC3 32Kbps ~ 6 Mbps (Bit rate) / 32KHz, 44.1KHz, 48KHz (Sampling rate)

LPCM 64Kbps ~ 1.5Mbps (Bit rate) / 8KHz ~ 48Khz (Sampling rate)

IMA-ADPCM/

MS-ADPCM

384Kbps (Bit rate) / 8KHz ~ 48Khz (Sampling rate)

G711 A/mu-law 64~128Kbps (Bit rate) / 8KHz (Sampling rate)

Picture

.jpeg

Baseline Resolution(WxH): 15360x8640, 4147200 bytes

Progressive Resolution(WxH): 1024x768, 6291456 bytes

.png

non-interlace Resolution(WxH): 9600x6400, 3840000 bytes

interlace

Resolution(WxH): 1200x800, 3840000 bytes

.bmp

Resolution(WxH): 9600x6400, 3840000 bytes

Subtitle

.sub - Sub1, Sub2, Sub3

.srt -

Ultra HD JPEG les are supported with some limitations listed below;

*The resolution of the le should be exactly 3840x2160.

*On-screen menus are not available while an Ultra HD picture is being displayed.

*Picture effects such as zoom, rotate etc. are not available.

*Sharpness is disabled.

*Slide show is not available.

*Setting Ultra HD pictures as boot logo is not available, if this feature is supported by your TV.

English - 29 -

Supported DVI Resolutions

When connecting devices to your TV’s connectors by using DVI converter cables(not supplied), you can refer

to the following resolution information.

24Hz 25Hz 30Hz 56Hz 60Hz 66Hz 70Hz 72Hz 75Hz

640x400

640x480

þ þ þ þ

800x600

þ þ þ þ þ

832x624

1024x768

þ þ þ þ þ

1152x864

þ þ þ

1152x870

1280x768

þ þ

1360x768

1280x960

þ þ

1280x1024

þ þ

1400x1050

þ þ

1440x900

þ þ

1600x1200

1680x1050

1920x1080

1920x1200

3840x2160

þ þ þ

English - 30 -

Important Instructions

For your own safety read the following instructions carefully before attempting to connect this unit to the

mains supply.

MAINS (AC) OPERATION

The wires in the mains lead are coloured in accordance with the following code :

IMPORTANT

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured

markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured green and yellow must be connected to the terminal which is marked with

the letter E, or by the earth symbol, or coloured green or green and yellow.

The wire which is coloured blue or black must be connected to the terminal which is marked with the

letter N or coloured Black.

The wire which is coloured brown or red must be connected to the terminal which is marked with the

letter L or coloured Red.

For continued protection against risk of re, replace only with same type and rating of fuse (ASTA

approved 5A 250VAC fuse).

CAUTION

TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFORE REMOVING

COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

SAFETY PRECAUTION

THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS WHEN NOT IN USE. DO NOT

ALLOW THIS UNIT TO BE EXPOSED TO RAIN OR MOISTURE.

GREEN

YELLOW

(Earth)

(if there is earth cable)

FUSE

BROWN

(Live)

BLUE

(Neutral)

English - 31 -

Product Fiche

Commercial Brand:FINLUX

Product No. 10094690

Model No. 55UT3EC320S-T

Energy eciency class A

Visible screen size

(diagonal,approx.) (inch/cm)

55 inches 140 cm

On mode average power

consumpon (Wa)

112

Annual energy consumpon (*)

(kWh/annum)

163

S t a n d b y p o w e r c o n s u m p  o n

(Wa)

0,5

O  m o d e p o w e r c o n s u m p  o n

(Wa)

N/A

Display resoluon (px) 3840x2160

Finlux 55UT3EC320 S-T Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info