778621
15
Verklein
Vergroot
Pagina terug
1/85
Pagina verder
Safety instructions when using long drill bits
a) Never operate at higher speed than the
maximum speed rating of the drill bit. At
higher speeds, the bit is likely to bend if al
lowed to rotate freely without contacting
the workpiece, resulting in personal injury.
b) Always start drilling at low speed and
with the bit tip in contact with the work
piece. At higher speeds, the bit is likely to
bend if allowed to rotate freely without con
tacting the workpiece, resulting in personal
injury.
c) Apply pressure only in direct line with
the bit and do not apply excessive pres
sure. Bits can bend causing breakage or
loss of control, resulting in personal injury.
2.3 Machine-specific safety instructions for
battery pack and charger
This charger can be operated by persons
with reduced physical, sensory or mental
capabilities or a lack of practical experi
ence and knowledge, provided they are su
pervised or have been instructed to use the
machine safely and understand the dan
gers of machine operation. Children are
not allowed use or play with the machine.
Do not open the battery pack or charger.
Protect the charger from metal compo
nents (e.g. swarf) and liquids.
Do not use power adapters or battery
packs form other manufacturers to oper
ate the cordless power tool. Do not use
any charger from other manufacturers for
charging the battery pack. The use of im
permissible accessories may result in elec
tric shock and / or serious accidents!
Protect the battery pack from heat > 50 °C
or constant heat sources such as sunlight
or naked flames.
Never use water to extinguish burning Li-
ion battery packs; always use sand or a fire
blanket.
Check the plug and the cable regularly in
order to prevent a hazard. In the event of
damage, these must be replaced by an au
thorised service workshop only.
Always pull the mains plug out of the sock
et when the charger is not in use.
2.4 Emission levels
The levels determined in accordance with
62841 are typically:
Sound pressure level LPA = 63 dB(A)
Sound power level LWA = 74 dB(A)
Uncertainty K = 3 dB
CAUTION
Noise generated when working
Risk of damage to hearing
Use ear protection.
Vibration emission level ah (vector sum for
three directions) and uncertainty K measured in
accordance with 62841:
Fastening ah = < 2.5 m/s2
K=1.5 m/s2
Drilling in metal ah = 3.0 m/s2
K=1.5 m/s2
The specified emission levels (vibration, noise)
are used to compare machines.
They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
The actual load during the entire operating
cycle must be evaluated.
Depending on the actual load, suitable pro
tective measures must be defined in order
to protect the operator.
3 Intended use
Cordless drill suitable
for screwing in and tightening screws,
for drilling in metal, wood, plastics and
similar materials.
Not intended for clamping tools other than
drills and drill bits, e.g. compass saws, stirring
rods, metal brushes.
Charger MXC suitable
for charging the listed battery packs.
only for indoor use.
The user is liable for improper or non-in
tended use; this also includes continuous
industrial operation.
English
15
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool TXS - 2021 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool TXS - 2021 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 2.69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info