778530
23
Verklein
Vergroot
Pagina terug
1/185
Pagina verder
Assure that the base plate of the saw will
not shift while performing a "plunge cut".
Blade shifting sideways will cause binding
and likely kick back.
Always observe that the guard is covering
the blade before placing the saw down on
bench or floor. An unprotected, coasting
blade will cause the saw to walk back
wards, cutting whatever is in its path. Be
aware of the time it takes for the blade to
stop after the switch is released.
Function of the feeler wedge [1-21] (kickback
stop function)
Every time the saw blade is replaced,
clean the feeler unit [5-4] by blowing it out
or using a brush. Any contamination of the
feeler unit may impair the kickback stop
function and therefore prevent the saw
blade from being stopped.
Do not operate the saw if the feeler wedge
is bent. Even the slightest damage can
slow the braking of the saw blade.
2.3 Safety instructions for the pre-
assembled saw blade
Usage
The maximum speed specified on the saw
blade must not be exceeded and the speed
range must be adhered to.
The pre-installed saw blade is only de
signed for use in circular saws.
Proceed with extreme care when unpack
ing, packing and handling the tool (e.g. in
stalling it in the machine). There is a risk of
injury from extremely sharp cutting edges!
When handling the tool, wearing safety
gloves provides a more secure hold of the
tool and further reduces the risk of injury.
Circular saw blades with cracked bodies
must be replaced. Repair is not permitted.
Circular saw blades with a combination de
sign (soldered saw teeth) with saw tooth
thickness smaller than 1 mm must no lon
ger be used.
WARNING! Do not use tools with visible
cracks or blunt or damaged cutting edges.
Installation and mounting
Tools must be clamped in such a way that
they cannot come loose during operation.
When assembling the tools, it must be en
sured that the clamping takes place on the
tool hub or the clamping surface of the
tool, and that the cutting edges do not
come into contact with other components.
Do not lengthen the key or tighten by hitting
with a hammer.
The clamping surfaces must be cleaned to
remove contamination, grease, oil and wa
ter.
Clamping screws must be tightened ac
cording to the manufacturer's instructions.
Only securely installed rings, e.g. rings that
have been pressed in or those that are held
in position by an adhesive bond, may be
used to adjust the hole diameter of circular
saw blades to the spindle diameter of the
machine. The use of loose rings is not per
mitted.
Service and maintenance
Repairs and sanding work may only be car
ried out by Festool customer service work
shops or experts.
The tool design must not be changed.
Deresinify and clean the tool regularly
(cleaning agent with pH between 4.5 and 8).
Blunt edges can be resharpened on the
clamping surface to a minimum cutting
edge thickness of 1 mm.
Only transport the tool in suitable packag
ing – risk of injury!
2.4 Further safety instructions
Wear suitable personal protective equip
ment: Ear protection, protective goggles,
dust mask for work that generates dust,
protective gloves for changing tools.
Harmful/toxic dust may be produced dur
ing your work (e.g. paint containing lead,
certain types of wood or metals). Contact
with or inhalation of this dust may pose a
risk for the operating personnel or persons
in the vicinity. Comply with the safety regu
lations that apply in your country.
Wear a P2 respiratory mask to protect
your health. In enclosed spaces, ensure
that there is sufficient ventilation and con
nect a mobile dust extractor.
This power tool cannot be installed in a
work bench. The power tool may become
unsafe and cause serious accidents if in
stalled in benches from other manufactur
ers or self-manufactured work benches.
English
23
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool TSC 55 KEB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool TSC 55 KEB in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 5.51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info