498080
14
Verklein
Vergroot
Pagina terug
1/83
Pagina verder
14
ROTEX
GB
Temperature cut-out
The machine power supply is limited and the
speed reduced if the motor exceeds a certain
temperature. The machine continues operat-
ing at reduced power to allow the ventilator
to cool the motor quickly. If the machine
temperature exceeds the maximum permit-
ted value for longer periods, the machine
switches off completely after approx. 40 sec-
onds and can only be switched on again once
the motor has cooled sufficiently.
7.2 Setting sanding motion [3]
The change-over switch
[1-2]
can be used
to set three different sanding motions.
L
This change-over can only be carried out
with the sanding pad stationary because
the switch is locked during operation.
Coarse sanding, polishing - ROTEX rota-
ry motion
The Rotex rotary motion is a combi-
nation of rotary and eccentric mo-
tions. This position is selected for
sanding with high output (coarse
sanding) and polishing.
Fine sanding - eccentric motion
This position is selected for sanding
with low output for a scratch-free
surface (fine sanding).
Triangular sanding and pad change [4]
This position is used for sanding
with the delta sanding pad and slat
sanding pad; the rotary motion is
blocked.
You can change the sanding pad in
this position.
L
The stop rod
[1-8]
blocks the in-
stallation of the sanding pad in the
change-over switch positions ROTEX rota-
ry motion and eccentric motion.
7.3 Changing sanding/polishing pad
[5]
L
Only use sanding and polishing pads that
are suitable for the maximum speed spec-
ified.
Tuned to the surface being processed, the
machine can be equipped with two sanding
pads of different hardnesses.
Hard:
Coarse and fine sanding on surfaces.
Sanding edges.
Soft:
Universal for coarse and fine sanding,
for flat and convex surfaces.
When the interface pad
[1-12]
is fitted on
the sanding pad, strength is reduced = extra
soft.
X
Following the sanding pad change, switch
the change-over switch
[1-2]
to the de-
sired sanding motion.
7.4 Changing sanding pad [6]
The delta sanding pad DSS-GE-STF-RO90
can be used for sanding close to borders, in
corners or on edges. The slat sanding pad
LSS-STF-RO90 can be used for sanding in
narrow gaps, e.g. louvres.
Observe the following instructions:
Work in corners and on edges tends to sub-
ject the tip to increased stress and results in
increased heat development. In such cases,
work with reduced contact pressure.
Delta sanding pad DSS-GE-STF-RO90
[7]
If the front tip of the StickFix pad
[7-1]
of
your delta sanding pad is worn, take it off
and turn it 120°.
Slat sanding pad LSS-STF-RO90 [8]
If the StickFix coating of the slat sanding pad
is worn, the complete table can be replaced.
Open the screws to do this
[8-1]
.
7.5 Attaching sanding accessories
The suitable StickFix sandpaper and StickFix
sanding cloth can be attached quickly and
simply to the StickFix sanding pad.
X
Press the self-adhesive sanding accessory
onto the sanding pad
[1-7]
.
7.6 Attaching polishing accessories
To prevent damage, PoliStick accessories
(polishing sponges, polishing felt, sheepskin)
must only be used on the special polishing
pad.
X
Press the self-adhesive polishing accesso-
ry onto the sanding pad
[1-9]
.
7.7 Dust extraction
WARNING
Dust hazard
X
Dust can be hazardous to health. Always
work with a dust extractor.
X
Always read applicable national regula-
tions before extracting hazardous dust.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool RO 90 DX FEQ ROTEX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool RO 90 DX FEQ ROTEX in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 25,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info