778810
20
Verklein
Vergroot
Pagina terug
1/172
Pagina verder
piece fragments. The eye protection must
be capable of stopping flying debris gener
ated by various operations. The dust mask
or respirator must be capable of filtrating
particles generated by your operation. Pro
longed exposure to high intensity noise may
cause hearing loss.
Keep bystanders a safe distance away
from work area. Anyone entering the work
area must wear personal protective
equipment. Fragments of workpiece or of a
broken accessory may fly away and cause
injury beyond immediate area of operation.
Hold the power tool by insulated gripping
surfaces, because the sanding surface
may contact its own cord. Cutting a "live"
wire may make exposed metal parts of the
power tool "live" and could give the opera
tor an electric shock.
Position the cord clear of the spinning ac
cessory. If you lose control, the cord may
be cut or snagged and your hand or arm
may be pulled into the spinning accessory.
Never lay the power tool down until the
accessory has come to a complete stop.
The spinning accessory may grab the sur
face and pull the power tool out of your
control.
Do not run the power tool while carrying it
at your side. Accidental contact with the
spinning accessory could snag your cloth
ing, pulling the accessory into your body.
Regularly clean the power tool’s air vents.
The motor’s fan will draw the dust inside
the housing and excessive accumulation of
powdered metal may cause electrical haz
ards.
Do not use accessories that require liquid
coolants. Using water or other liquid cool
ants may result in electrocution or shock.
2.3 Further safety instructions
Harmful/poisonous dust may be produced
when working (e.g. paint products con
taining lead and some types of wood).
Contact with or inhalation of this dust may
pose a risk for the operating personnel or
persons in the vicinity. Comply with the
safety regulations that apply in your coun
try. Connect the power tool to a suitable
dust extractor.
Wear at least a P2 respiratory mask to
protect your health. Ensure there is ade
quate ventilation in enclosed spaces.
Use a residual-current circuit break
er (RCCB) or an isolating transformer if
operation of the power tool in a damp en
vironment cannot be avoided. In the event
of an electric shock, the residual-current
circuit breaker (RCCB) or isolating trans
former protects you against life-threaten
ing current through the body.
If potentially explosive or self-igniting dust
is produced during sanding, the machining
instructions issued by the material manu
facturer must always be followed.
Caution: Fire hazard! Prevent the material
being sanded and the sander from over
heating. Always empty the dust container
before taking breaks from work. Grinding
dust in the filter bag and/or in the filter of
the mobile dust extractor may ignite spon
taneously under unfavourable conditions,
such as flying sparks, when sanding. There
is a particular risk if the sanding dust is
mixed with clear coats or polyurethane res
idues or other chemical substances and the
material being sanded becomes hot after it
has been worked on for a long time.
Metals and materials that contain asbes
tos must not be processed. Sparks may be
created in the dust bag when processing
metals. This increases the risk of fire.
Hold the power tool firmly with both hands
and maintain a stable stance when per
forming work. Using both hands ensures
that the power tool is guided safely, see
Section 8.1
Warning of harmful light radiation.
Do not look into the light beam for long
periods. Do not direct the light beam to
wards other people or animals. Optical ra
diation can damage the eyes.
Always use an antistatic suction hose (AS)
with the power tool. A slight electric shock
may cause you to panic briefly and become
distracted, which may result in an accident.
Always use original Festool backing pads.
Pads from other manufacturers can break.
The light source fitted
in this device must only be replaced by the
manufacturer or a customer service work
English
20
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool LHS 2 225 EQ PLANEX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool LHS 2 225 EQ PLANEX in de taal/talen: Alle talen als bijlage per email.

De handleiding is 3.79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info